Biomimetic Biomolecules in Next Generation Xeno-Hybrid Bone Graft Material Show Enhanced In Vitro Bone Cells Response

Evaluation of the Palatal Features in Relation to Graft Harvesting in the Saudi Population

Background and Objectives: The palate's morphological characteristics are of great importance, especially in periodontology, where the palatine tissue represents a source of tissue graft for multiple mucogingival surgeries. This study aimed to estimate the amount of donor tissue available through the average palatal height and average location of the greater palatine artery in the Saudi population according to age and gender. Materials and Methods: Digital casts for adult Saudi patients at the age of 18-60 years old with a mean age of 37.76 ± 12.68 years were collected and analyzed using EXOCAD software. The digital casts were evaluated, and measurements of arch width at molars and canines, palatal vault height (PVH), palatal height index (PHI), and extension of the palatal rugae were registered. Finally, the amount available for soft tissue graft harvesting was calculated. Results: Overall, 109 maxillary casts for Saudi patients, 52 (47.7%) males and 57 (52.3%) females, were analyzed. The maxillary inter-molar arch width, inter-canine width, and palatal vault height significantly differed between males and females (p < 0.05). The mean PHI was 45.51% ± 8.12%, and 27.5% were classified as orthostaphyline, while 72.5% were categorized as hypsistaphyline, with no significant difference between the genders. The mean maximum graft width was 11.45 mm, and the graft width was significantly different between males and females (p < 0.005), while the mean maximum graft length was 17.78 mm, and the graft length showed no significant difference. Conclusions: The results of this study provide specific clinical guidelines for periodontal procedures by emphasizing the importance of gender-specific anatomical considerations. Data on graft dimensions and palatal measurements will enable the exact planning of soft tissue harvesting to minimize surgical risks and optimize mucogingival surgery outcomes in the Saudi population.

A comprehensive systematic review of marketed bone grafts for load-bearing critical-sized bone defects

Treatment of critical-sized bone defects typically involves implantation of a bone graft. Various types of bone grafts are nowadays marketed, categorized by their origin as allografts, xenografts, or synthetic grafts. Despite their widespread use, a comprehensive understanding of their morphology and mechanical response remains elusive. Controlling these characteristics for promoting bone growth and ensuring mechanical resistance remains challenging, especially in load-bearing districts. This study aims to systematically review existing literature to delineate the principal morpho-mechanical characteristics of marketed bone grafts designed for load-bearing applications. Furthermore, the obtained data are organized and deeply discussed to find out the relationship between different graft characteristics. Among 196 documents identified through PRISMA guidelines, encompassing scientific papers and 510(k) documents, it was observed that a majority of marketed bone grafts exhibited porosity akin to bone (>60%) and mechanical properties resembling those of low-bone volume fraction trabecular bone. The present review underscores the dearth of information regarding the morpho-mechanical characteristics of bone grafts and the incomparability of data derived from different studies, due to the absence of suitable standards and guidelines. The need for new standards and complete and transparent morpho-mechanical characterization of marketed bone grafts is finally emphasized. Such an approach would enhance the comparability of data, aiding surgeons in selecting the optimal device to meet patient's needs.

Towards bone regeneration: Understanding the nucleating ability of proline-rich peptides in biomineralisation

Obtaining rapid mineralisation is a challenge in current bone graft materials, which has been attributed to the difficulty of guiding the biological processes towards osteogenesis. Amelogenin, a key protein in enamel formation, inspired the design of two intrinsically disordered peptides (P2 and P6) that enhance in vivo bone formation, but the process is not fully understood. In this study, we have elucidated the mechanism by which these peptides induce improved mineralisation. Our molecular dynamics analysis demonstrated that in an aqueous environment, P2 and P6 fold to interact with the surrounding Ca2+, PO43- and OH- ions, which can lead to apatite nucleation. Although P2 has a less stable backbone, it folds to a stable structure that allows for the nucleation of larger calcium phosphate aggregates than P6. These results were validated experimentally in a concentrated simulated body fluid solution, where the peptide solutions accelerated the mineralisation process compared to the control and yielded mineral structures mimicking the amorphous calcium phosphate crystals that can be found in lamella bone. A pH drop for the peptide groups suggests depletion of calcium and phosphate, a prerequisite for intrinsic osteoinduction, while S/TEM and SEM suggested that the peptide regulated the mineral nucleation into lamella flakes. Evidently, the peptides accelerate and guide mineral formation, elucidating the mechanism for how these peptides can improve the efficacy of P2 or P6 containing devices for bone regeneration. The work also demonstrates how experimental mineralisation study coupled with molecular dynamics is a valid method for understanding and predicting in vivo performance prior to animal trials.

Adaptable test bench for ASTM-compliant permeability measurement of porous scaffolds for tissue engineering

Intrinsic permeability describes the ability of a porous medium to be penetrated by a fluid. Considering porous scaffolds for tissue engineering (TE) applications, this macroscopic variable can strongly influence the transport of oxygen and nutrients, the cell seeding process, and the transmission of fluid forces to the cells, playing a crucial role in determining scaffold efficacy. Thus, accurately measuring the permeability of porous scaffolds could represent an essential step in their optimization process. In literature, several methods have been proposed to characterize scaffold permeability. Most of the currently adopted approaches to assess permeability limit their applicability to specific scaffold structures, hampering protocols standardization, and ultimately leading to incomparable results among different laboratories. The content of novelty of this study is in the proposal of an adaptable test bench and in defining a specific testing protocol, compliant with the ASTM International F2952-22 guidelines, for reliable and repeatable measurements of the intrinsic permeability of TE porous scaffolds. The developed permeability test bench (PTB) exploits the pump-based method, and it is composed of a modular permeability chamber integrated within a closed-loop hydraulic circuit, which includes a peristaltic pump and pressure sensors, recirculating demineralized water. A specific testing protocol was defined for characterizing the pressure drop associated with the scaffold under test, while minimizing the effects of uncertainty sources. To assess the operational capabilities and performance of the proposed test bench, permeability measurements were conducted on PLA scaffolds with regular (PS) and random (RS) micro-architecture and on commercial bovine bone matrix-derived scaffolds (CS) for bone TE. To validate the proposed approach, the scaffolds were as well characterized using an alternative test bench (ATB) based on acoustic measurements, implementing a blind randomized testing procedure. The consistency of the permeability values measured using both the test benches demonstrated the reliability of the proposed approach. A further validation of the PTB's measurement reliability was provided by the agreement between the measured permeability values of the PS scaffolds and the theory-based predicted permeability value. Once validated the proposed PTB, the performed measurements allowed the investigation of the scaffolds' transport properties. Samples with the same structure (guaranteed by the fused-deposition modeling technique) were characterized by similar permeability values, and CS and RS scaffolds showed permeability values in agreement with the values reported in the literature for bovine trabecular bone. In conclusion, the developed PTB and the proposed testing protocol allow the characterization of the intrinsic permeability of porous scaffolds of different types and dimensions under controlled flow regimes, representing a powerful tool in view of providing a reliable and repeatable framework for characterizing and optimizing scaffolds for TE applications.

Unlocking the Potential of Dental-Derived Mesenchymal Stem Cells in Regenerative Medicine

Over the past few decades, life expectancy has been increasing in several countries [...].

Design and clinical application of injectable hydrogels for musculoskeletal therapy

Musculoskeletal defects are an enormous healthcare burden and source of pain and disability for individuals. With an aging population, the proportion of individuals living with these medical indications will increase. Simultaneously, there is pressure on healthcare providers to source efficient solutions, which are cheaper and less invasive than conventional technology. This has led to an increased research focus on hydrogels as highly biocompatible biomaterials that can be delivered through minimally invasive procedures. This review will discuss how hydrogels can be designed for clinical translation, particularly in the context of the new European Medical Device Regulation (MDR). We will then do a deep dive into the clinically used hydrogel solutions that have been commercially approved or have undergone clinical trials in Europe or the United States. We will discuss the therapeutic mechanism and limitations of these products. Due to the vast application areas of hydrogels, this work focuses only on treatments of cartilage, bone, and the nucleus pulposus. Lastly, the main steps toward clinical translation of hydrogels as medical devices are outlined. We suggest a framework for how academics can assist small and medium MedTech enterprises conducting the initial clinical investigation and post‐market clinical follow‐up required in the MDR. It is evident that the successful translation of hydrogels is governed by acquiring high‐quality pre‐clinical and clinical data confirming the device mechanism of action and safety.

Commercial Bone Grafts Claimed as an Alternative to Autografts: Current Trends for Clinical Applications in Orthopaedics

In the last twenty years, due to an increasing medical and market demand for orthopaedic implants, several grafting options have been developed. However, when alternative bone augmentation materials mimicking autografts are searched on the market, commercially available products may be grouped into three main categories: cellular bone matrices, growth factor enhanced bone grafts, and peptide enhanced xeno-hybrid bone grafts. Firstly, to obtain data for this review, the search engines Google and Bing were employed to acquire information from reports or website portfolios of important competitors in the global bone graft market. Secondly, bibliographic databases such as Medline/PubMed, Web of Science, and Scopus were also employed to analyse data from preclinical/clinical studies performed to evaluate the safety and efficacy of each product released on the market. Here, we discuss several products in terms of osteogenic/osteoinductive/osteoconductive properties, safety, efficacy, and side effects, as well as regulatory issues and costs. Although both positive and negative results were reported in clinical applications for each class of products, to date, peptide enhanced xeno-hybrid bone grafts may represent the best choice in terms of risk/benefit ratio. Nevertheless, more prospective and controlled studies are needed before approval for routine clinical use.

Xeno-Hybrid Bone Graft Releasing Biomimetic Proteins Promotes Osteogenic Differentiation of hMSCs

Bone defect is a noteworthy health problem and is the second most transplanted tissue after blood. Numerous bone grafts are designed and applied in clinics. Limitations, however, from different aspects still exist, including limited supply, mechanical strength, and bioactivity. In this study, two biomimetic peptides (P2 and P6) are incorporated into a composite bioactive xeno hybrid bone graft named SmartBonePep®, with the aim to increase the bioactivity of the bone graft. The results, which include cytotoxicity, proliferation rate, confocal microscopy, gene expression, and protein qualification, successfully prove that the SmartBonePep® has multi-modal biological effects on human mesenchymal stem cells from bone marrow. The effective physical entrapment of P6 into a composite xeno-hybrid bone graft, withstanding manufacturing processes including exposure to strong organic solvents and ethylene oxide sterilization, increases the osteogenic potential of the stem cells as well as cell attachment and proliferation. P2 and P6 both show a strong biological potential and may be future candidates for enhancing the clinical performance of bone grafts.

MMP-1 promotes osteogenic differentiation of human bone marrow mesenchymal stem cells via the JNK and ERK pathway

Enhancing the functions of mesenchymal stem cells (MSCs) is considered a potential approach for promoting tissue regeneration. In this study, we investigated the effects of Matrix Metalloproteinase-1 (MMP-1) on bone marrow mesenchymal stem cells (BMSCs) and its mechanism. Our results showed that knockdown of MMP-1 impeded scratch closure, attenuated proliferation, inhibited ALP activity, ALP denser staining and mineralization in vitro, and decreased expression of RUNX2, OSX, OPN and OCN in BMSCs, while 20 ng/mL recombinant human MMP-1 protein (rhMMP-1) significantly accelerated scratch closure, enhanced proliferation, ALP activity, ALP denser staining and mineralization in vitro, and increased expression of RUNX2, OSX, OPN and OCN. In addition, knockdown of MMP-1 inhibited the expression of phosphorylated c-Jun N-terminal kinase (p-JNK) and phosphorylated extracellular regulated protein kinases (p-ERK), while 20 ng/mL rhMMP-1 increased the expression of p-JNK and p-ERK in BMSCs. Furthermore, inhibition of c-Jun N-terminal kinase (JNK) and extracellular regulated protein kinases (ERK) by their inhibitor SP600125 and PD98059 dramatically blocked MMP-1-enhanced ALP activity and mineralization in BMSCs. Our results revealed that MMP-1 could accelerate the osteogenic differentiation potentials of BMSCs via the JNK and ERK pathway, providing the mechanism underlying MSC biology and identifying a potential target for improving bone tissue regeneration.

Hydrogel as a Biomaterial for Bone Tissue Engineering: A Review

Severe bone damage from diseases, including extensive trauma, fractures, and bone tumors, cannot self-heal, while traditional surgical treatment may bring side effects such as infection, inflammation, and pain. As a new biomaterial with controllable mechanical properties and biocompatibility, hydrogel is widely used in bone tissue engineering (BTE) as a scaffold for growth factor transport and cell adhesion. In order to make hydrogel more suitable for the local treatment of bone diseases, hydrogel preparation methods should be combined with synthetic materials with excellent properties and advanced technologies in different fields to better control drug release in time and orientation. It is necessary to establish a complete method to evaluate the hydrogel's properties and biocompatibility with the human body. Moreover, establishment of standard animal models of bone defects helps in studying the therapeutic effect of hydrogels on bone repair, as well as to evaluate the safety and suitability of hydrogels. Thus, this review aims to systematically summarize current studies of hydrogels in BTE, including the mechanisms for promoting bone synthesis, design, and preparation; characterization and evaluation methods; as well as to explore future applications of hydrogels in BTE.

Adsorption and Release of Growth Factors from Four Different Porcine-Derived Collagen Matrices

Xenogeneic acellular collagen matrices represent a safe alternative to autologous soft tissue transplants in periodontology and implant dentistry. Here, we aimed to investigate the adsorption and release of growth factors from four porcine-derived collagen matrices using enzyme-linked immunosorbent assay. Non-crosslinked collagen matrix (NCM), crosslinked collagen matrix (CCM), dried acellular dermal matrix (DADM), and hydrated acellular dermal matrix (HADM) adsorbed each of the following growth factors, TGF-β1, FGF-2, PDGF-BB, GDF-5 and BMP-2, with an efficiency close to 100%. Growth factor release for a 13-day period was in the range of 10-50% of the adsorbed protein, except for the BMP-2 release that was in the range of 5-7%. Generally, protein release occurred in two phases. Phase I was arbitrary defined by the highest release from the matrices, usually within 24 h. Phase II, spanning the period immediately after the peak release until day 13, corresponded to the delayed release of the growth factors from the deeper layers of the matrices. HADM showed significantly (P < 0.001) higher TGF-β1, FGF-2, and PDGF-BB release in phase II, compared to the rest of the matrices. NCM exhibited significantly (P < 0.001) higher FGF-2 release in phase II, compared to CCM and DADM as well as a characteristic second peak in PDGF-BB release towards the middle of the tested period. In contrast to NCM and HADM, CCM and DADM showed a gradual and significantly higher release of GDF-5 in the second phase. Several burst releases of BMP-2 were characteristic for all matrices. The efficient adsorption and sustained protein release in the first 13 days, and the kinetics seen for HADM, with a burst release within hours and high amount of released growth factor within a secondary phase, may be beneficial for the long-term tissue regeneration following reconstructive periodontal surgery.