The Role of Multiwalled Carbon Nanotubes in the Mechanical, Thermal, Rheological, and Electrical Properties of PP/PLA/MWCNTs Nanocomposites

Morphology and thermal properties of poly(l-lactic acid) nucleated with 2,2'-(butane-1,4-diylbis(oxy))di(benzohydrazide)

This study evaluates the modification of biodegradable poly(l-lactide) (PLLA) using a novel organic nucleating agent, 2,2'-(butane-1,4-diylbis(oxy))di(benzohydrazide) (BDOBH) with a low concentration range from (0.3-3 wt%). The novelty of this work lies in the development and application of BDOBH as a highly efficient, low-loading organic nucleator tailored to improve PLLA's crystallization behavior and thermal properties-key limitations in its broader industrial use. The evaluation is conducted through differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier-transform infrared spectroscopy (FTIR), and polarized optical microscopy. FTIR analysis reveals the presence of H-bonding interaction between BDOBH and PLLA. DSC results significantly improve PLLA's crystallization rate, with BDOBH in a concentration range from 0.3 to 0.7 wt%. The total crystallinity of PLLA increases from 12% to 56-60% without a change in PLA's crystallography; moreover, the maximum temperature of the cold crystallization peak shifts to a lower value by 35 °C after incorporating BDOBH-0.7 into PLLA. POM results reveal a drastic decrease in the spherulitic size of PLLA. Furthermore, the presence of BDOBH enhances the thermal stability of PLLA. The nonisothermal cold crystallization behavior of PLLA nucleated by BDOBH is evaluated using the modified Avrami and Mo models. Multiple indicators of nonisothermal crystallization, including the crystallization half-time and crystallization rate constant, indicate that BDOBH greatly expedites the crystallization process. The activation energy values of the plain PLLA and PLLA-BDOBH, as computed using the Kissinger-Akahira-Sunose (KAS) model, decrease when BDOBH is incorporated. These findings highlight BDOBH's potential as a cost-effective and scalable additive to tailor PLLA crystallization, supporting its use in environmentally friendly packaging, biomedical devices, and other high-performance biodegradable applications.

The role of multi-walled carbon nanotubes in enhancing the hydrolysis and thermal stability of PLA

Polylactic acid (PLA) is a bioresorbable and biodegradable polymer extensively used in various biomedical and engineering applications. In this study, we investigated the mass loss and thermal properties of PLA-multi-walled carbon nanotube (MWCNT) composites under simulated physiological conditions. The composites were prepared by melting PLA with 0.1, 0.5, 1.0, and 5.0 wt% MWCNTs using an ultrasonic agitator, and FTIR analysis confirmed composite formation. Subsequently, the composites were subjected to hydrolysis under simulated physiological conditions (pH 7.4 and 37 °C) for up to 60 days. The results revealed that the mass loss of the composites decreased with increasing MWCNT content, suggesting that the presence of MWCNTs decelerated the hydrolysis process. On day 58, the mass loss of pure PLA was 12.5%, decreasing to 8.34% with 0.1% MWCNT, 5.94% with 0.5% MWCNT, 4.59% with 1% MWCNT, and 3.54% with 5.0% MWCNT. This study offers valuable insights into the behavior of PLA-MWCNT composites under physiologically simulated conditions, facilitating the development of new polymer composites with enhanced thermal stability and degradation resistance for biomedical applications.

Effect of Epoxidized and Maleinized Corn Oil on Properties of Polylactic Acid (PLA) and Polyhydroxybutyrate (PHB) Blend

The present work analyzes the influence of modified, epoxidized and maleinized corn oil as a plasticizing and/or compatibilizing agent in the PLA-PHB blend (75% PLA and 25% PHB wt.%). The chemical modification processes of corn oil were successfully carried out and different quantities were used, between 0 and 10% wt.%. The different blends obtained were characterized by thermal, mechanical, morphological, and disintegration tests under composting conditions. It was observed that to achieve the same plasticizing effect, less maleinized corn oil (MCO) is needed than epoxidized corn oil (ECO). Both oils improve the ductile properties of the PLA-PHB blend, such as elongation at break and impact absorb energy, however, the strength properties decrease. The ones that show the highest ductility values are those that contain 10% ECO and 5% MCO, improving the elongation of the break of the PLA-PHB blend by more than 400% and by more than 800% for the sample PLA.

Mechanically robust and flame-retardant poly(lactide)/poly(butylene adipate-co-terephthalate) composites based on carbon nanotubes and ammonium polyphosphate

In order to synchronously improve mechanical and flame retardant properties of polylactide/poly(butylene adipate-co-terephthalate) (PLA/PBAT) composites, a series of multifunctional composites containing multi-walled carbon nanotubes (CNTs), ammonium polyphosphate (APP) and a commercial multifunctional epoxy oligomer (MEO) as chain extender were prepared via melt blending. The results show that the optimal flame retardant properties of PLA5-PBAT5/10A/6C composite containing 6 % CNTs and 10 wt% APP, presented the limited oxygen index reached 28.3 % and exhibited a decrease in peak heat release rate (pHRR) and total heat release (THR) to 368 kJ/m² and 72 MJ/m², respectively because of the co-continuous phase, CNTs network and condensed effect of APP. Meanwhile, the construction of co-continuous phases endows PLA5-PBAT5 with better mechanical compared to PLA8-PBAT2 composites. The elongation at break reaches (245.9 %) and notched impact strength (16.5 kJ/m²) of PLA5-PBAT5/10A/6C were higher than the PLA8-PBAT2/10A/6C by 16.0 and 283.7 %.

Rheological Properties of MWCNT-Doped Titanium-Oxo-Alkoxide Gel Materials for Fiber Drawing

A strategy of doping by multi-walled carbon nanotubes (MWCNT) to enhance mechanical strength and the electrical conductivity of ceramic fibers has nowadays attracted a great deal of attention for a wide variety of industrial applications. This study focuses on the effect of MWCNTs on rheological properties of metal alkoxide precursors used for the preparation of nanoceramic metal oxide fibers. The rheological behavior of MWCNT-loaded titanium alkoxide sol precursors has been evaluated via an extensional rheometry method. A substantial decrease in elongational viscosity and relaxation time has been observed upon an introduction of MWCNTs even of low concentrations (less than 0.1 wt.%). A high quality MWCNT/nanoceramic TiO₂ composite fibers drawn from the specified precursors has been validated. The MWCNT percolation, which is mandatory for electrical conductivity (50 S/m), has been achieved at 1 wt.% MWCNT doping.

Graphene, Graphene-Derivatives and Composites: Fundamentals, Synthesis Approaches to Applications

Graphene has accomplished huge notoriety and interest from the universe of science considering its exceptional mechanical physical and thermal properties. Graphene is an allotrope of carbon having one atom thick size and planar sheets thickly stuffed in a lattice structure resembling a honeycomb structure. Numerous methods to prepare graphene have been created throughout a limited span of time. Due to its fascinating properties, it has found some extensive applications to a wide variety of fields. So, we believe there is a necessity to produce a document of the outstanding methods and some of the novel applications of graphene. This article centres around the strategies to orchestrate graphene and its applications in an attempt to sum up the advancements that has taken place in the research of graphene.

Promoting Interfacial Interactions with the Addition of Lignin in Poly(Lactic Acid) Hybrid Nanocomposites

In this paper, the calorimetric response of the amorphous phase was examined in hybrid nanocomposites which were prepared thanks to a facile synthetic route, by adding reduced graphene oxide (rGO), Cloisite 30B (C30B), or multiwalled carbon nanotubes (MWCNT) to lignin-filled poly(lactic acid) (PLA). The dispersion of both lignin and nanofillers was successful, according to a field-emission scanning-electron microscopy (FESEM) analysis. Lignin alone essentially acted as a crystallization retardant for PLA, and the nanocomposites shared this feature, except when MWCNT was used as nanofiller. All systems exhibiting a curtailed crystallization also showed better thermal stability than neat PLA, as assessed from thermogravimetric measurements. As a consequence of favorable interactions between the PLA matrix, lignin, and the nanofillers, homogeneous dispersion or exfoliation was assumed in amorphous samples from the increase of the cooperative rearranging region (CRR) size, being even more remarkable when increasing the lignin content. The amorphous nanocomposites showed a signature of successful filler inclusion, since no rigid amorphous fraction (RAF) was reported at the filler/matrix interface. Finally, the nanocomposites were crystallized up to their maximum extent from the glassy state in nonisothermal conditions. Despite similar degrees of crystallinity and RAF, significant variations in the CRR size were observed among samples, revealing different levels of mobility constraining in the amorphous phase, probably linked to a filler-dimension dependence of space filling.

Mechanical, Thermal, and Morphological Properties of Graphene Nanoplatelet-Reinforced Polypropylene Nanocomposites: Effects of Nanofiller Thickness

In this work, polypropylene (PP) and graphene nanoplatelet (GNPs) composites are routed through twin screw mixing and injection moulding. Two types of GNPs with a fixed size of 25 µm with surface areas ranging from 50–80 m2/g (H25, average thickness 15 nm) and 120–150 m2/g (M25, average thickness 6–8 nm) were blended with PP at loading rates of 1, 2, 3, 4, and 5 weight%. Mechanical properties such as tensile, flexural, and impact strengths and Young’s modulus (Ε) are determined. The X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), field emission scanning electron microscopy (FESEM), and polarised light microscopy (PLM) techniques are used to understand the crystallisation, thermal, dynamic mechanical, and structural behaviour of the prepared composites. The improvement of mechanical strength is observed with GNP loading for both grades. Decreasing the GNP thickness decreases the impact strength and on the other hand improves the tensile and flexural strengths and Young’s modulus. Maximum tensile (≈33 MPa) and flexural (≈58.81 MPa) strength is found for the composite carrying 5 wt% M25. However, maximum impact strength (0.197 J) is found for PP-5 wt% H25. XRD analysis confirms GNPs have an induction effect on PP’s β phase crystal structure. The PP-GNP composite exhibits better thermal stability based on determining the TD (degradation temperature), T10 (temperature at 10% weight loss), T50 (temperature at 50% weight loss), and TR (temperature at residual weight). Enhancement in melt (Tm) and crystallisation temperatures (Tc) is are observed due to a heterogeneous nucleation effect. The FESEM analysis concludes that the GNP thickness has a significant effect on the degree of dispersion and agglomeration. The smaller the thickness, the better is the dispersion and the lower is the agglomeration. Overall, the use of thinner GNPs is more advantageous in improving the polymer properties.

Highly Stretchable and Flexible Melt Spun Thermoplastic Conductive Yarns for Smart Textiles

This study demonstrates a scalable fabrication process for producing biodegradable, highly stretchable and wearable melt spun thermoplastic polypropylene (PP), poly(lactic) acid (PLA), and composite (PP:PLA = 50:50) conductive yarns through a dip coating process. Polydopamine (PDA) treated and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) coated conductive PP, PLA, and PP/PLA yarns generated electric conductivity of 0.75 S/cm, 0.36 S/cm and 0.67 S/cm respectively. Fourier Transform Infrared Spectroscopy (FTIR) confirmed the interactions among the functional groups of PP, PLA, PP/PLA, PDA, and PEDOT:PSS. The surface morphology of thermoplastic yarns was characterized by optical microscope and Scanning Electron Microscope (SEM). The mechanical properties of yarns were also assessed, which include tensile strength (TS), Young’s modulus and elongation at break (%). These highly stretchable and flexible conductive PP, PLA, and PP/PLA yarns showed elasticity of 667%, 121% and 315% respectively. The thermal behavior of yarns was evaluated by differential scanning calorimetry (DSC) and thermo-gravimetric analysis (TGA). Wash stability of conductive yarns was also measured. Furthermore, ageing effect was determined to predict the shelf life of the conductive yarns. We believe that these highly stretchable and flexible PEDOT:PSS coated conductive PP, PLA, and PP/PLA composite yarns fabricated by this process can be integrated into textiles for strain sensing to monitor the tiny movement of human motion.

Rheological Behavior of Polymer/Carbon Nanotube Composites: An Overview

This paper reviews the current achievements regarding the rheological behavior of polymer-based nanocomposites containing carbon nanotubes (CNTs). These systems have been the subject of a very large number of scientific investigations in the last decades, due to the outstanding characteristics of CNTs that have allowed the formulation of nanostructured polymer-based materials with superior properties. However, the exploitation of the theoretical nanocomposite properties is strictly dependent on the complete dispersion of CNTs within the host matrix and on the consequent development of a huge interfacial region. In this context, a deep knowledge of the rheological behavior of CNT-containing systems is of fundamental importance, since the evaluation of the material's viscoelastic properties allows the gaining of fundamental information as far as the microstructure of nanofilled polymers is concerned. More specifically, the understanding of the rheological response of polymer/CNT nanocomposites reveals important details about the characteristics of the interface and the extent of interaction between the two components, hence allowing the optimization of the final properties in the resulting nanocomposites. As the literature contains plenty of reviews concerning the rheological behavior of polymer/CNT nanocomposites, this review paper will summarize the most significant thermoplastic matrices in terms of availability and relevant industrial applications.

Compatibilization and Characterization of Polylactide and Biopolyethylene Binary Blends by Non-Reactive and Reactive Compatibilization Approaches

In this study, different compatibilizing agents were used to analyze their influence on immiscible blends of polylactide (PLA) and biobased high-density polyethylene (bioPE) 80/20 (wt/wt). The compatibilizing agents used were polyethylene vinyl acetate (EVA) with a content of 33% of vinyl acetate, polyvinyl alcohol (PVA), and dicumyl peroxide (DPC). The influence of each compatibilizing agent on the mechanical, thermal, and microstructural properties of the PLA-bioPE blend was studied using different microscopic techniques (i.e., field emission electron microscopy (FESEM), transmission electron microscopy (TEM), and atomic force microscopy with PeakForce quantitative nanomechanical mapping (AFM-QNM)). Compatibilized PLA-bioPE blends showed an improvement in the ductile properties, with EVA being the compatibilizer that provided the highest elongation at break and the highest impact-absorbed energy (Charpy test). In addition, it was observed by means of the different microscopic techniques that the typical droplet-like structure is maintained, but the use of compatibilizers decreases the dimensions of the dispersed droplets, leading to improved interfacial adhesion, being more pronounced in the case of the EVA compatibilizer. Furthermore, the incorporation of the compatibilizers caused a very marked decrease in the crystallinity of the immiscible PLA-bioPE blend.