Effect of Core-shell Ceria/Poly(Vinylpyrrolidone) (PVP) Nanoparticles Incorporated in Polymer Films and Their Optical Properties (2): Increasing the Refractive Index

Features of Structure and Properties of pнeмa-gr-pvp Block Copolymers, Obtained in the Presence of Fe2

This paper presents the research results of the copolymer structure and properties of 2-hydroxyethylmethacrylate (HEMA) with polyvinylpyrrolidone (PVP) and their hydrogels, obtained by block polymerization in the presence of iron sulfate (II). By the methods of chemical analysis, IR spectroscopy, Thermogravimetric (TG) and Differential Thermal Analysis (DTA), the course of grafted copolymerization of HEMA on PVP with the formation of a cross-linked copolymer was confirmed. The results received by scanning electron microscopy showed that due to the copolymerization of HEMA with PVP, macroporous hydrogels with a pore size of 10-30 μm were obtained. The peculiarities of the structure formation of the obtained copolymers depending on the initial composition formulation were established and their structural parameters were investigated: PVP grafting efficiency, PVP content in copolymer, molecular weight of internodal fragment of polymer network, crosslinking degree, and crosslinking density. The interrelation of sorption-diffusion, physical-mechanical and thermophysical properties along with the structure of the obtained materials was proved. It was shown that with the increasing PVP content in the original composition, the efficiency of its grafting and crosslinking density of the polymer network decreased, but the surface hardness, heat resistance, sorption capacity of copolymers in the dry state, as well as ion permeability and elasticity in the swollen state increased, while their tensile strength deteriorated. It is proved that by changing the original composition formulation it is possible to change the structure and hence the properties of the copolymers in the desired direction.

Novel Ni/pHEMA-gr-PVP Composites Obtained by Polymerization with Simultaneous Metal Deposition: Structure and Properties

The synthesis and study of metal-containing hydrogels, particularly those filled with nickel nanoparticles, is currently of interest to many researchers. This paper presents the results of an investigation of the structure and properties of Ni(0)-filled composites on the basis of 2-hydroxyethylmethacrylate copolymers (HEMA) with polyvinylpyrrolidone (PVP) and their hydrogels. The authors of the article are the first who propose the method to produce these materials by combining the processes of polymer matrix synthesis and a reduction of Ni²⁺ ions. Synthesis is carried out in one stage without complicated equipment and is technologically simple. It is determined by thermometric research that the temperature conditions required for the chemical reduction of Ni²⁺ are achieved due to the heat released during the exothermic reaction of HEMA polymerization in the presence of PVP. With the help of Fourier transform infrared analysis, and thermogravimetric and differential-thermal analysis, the formation of a crosslinked graft copolymer based on HEMA and PVP was confirmed, and its structural parameters, including the efficiency of PVP grafting, PVP content in the copolymer, and the molecular weight of the interstitial fragment of the polymer network, were investigated. The results obtained with scanning electron microscopy revealed that the size of the Ni(0) particles is about 500 nm. X-ray structural analysis of the composites obtained confirmed the existence of metal nickel particles. The strength, elastic, sorption, electrical, and magnetic properties of the obtained composites in the solid (dry) and elastic (swollen) physical states, depending on the composition of the copolymer and the content of the metal filler, have been investigated.

Thin Film Coating with Highly Dispersible Barium Titanate-Polyvinylpyrrolidone Nanoparticles

Thin BaTiO₃ (BT) coating layers are required in various multilayer ceramic technologies, and fine nanosized BT particles with good dispersion in solution are essential for this coating process. In this work, cubic and tetragonal phase monodispersed BT nanoparticles—which were referred to as LBT and HBT-PVP coated on their surface by polyvinylpyrrolidone (PVP) polymer—were prepared by low temperature synthesis (LTS) and hydrothermal method (HT) at 80 and 230 °C, respectively. They were applied for the thin film coating on polyethylene terephthalate (PET) and Si wafer substrates by a simple bar coating. The thickness of BT, LBT-PVP, and HBT-PVP films prepared by their 5 wt % coating agent on Si are around 268, 308, and 263 nm, and their surface roughness are 104.6, 91.6, and 56.1 nm, respectively. The optical transmittance of BT, LBT-PVP, and HBT-PVP films on PET are 55, 66, and 73% at 550 nm wavelength and the haze values are 34.89, 24.70, and 20.53% respectively. The mechanism of dispersant adsorbed on the BT surface for densification of thin film during the drying process of the film was discussed.