Determination of the volatile composition in brown millet, milled millet and millet bran by gas chromatography/mass spectrometry

Uncovering the Differences in Flavour Volatiles from Hybrid and Conventional Foxtail Millet Varieties Based on Gas Chromatography-Ion Migration Spectrometry and Chemometrics

The flavour of foxtail millet (Setaria italica (L.) P. Beauv.) is an important indicator for evaluating the quality of the millet. The volatile components in steamed millet porridge samples were analysed using electronic nose (E-Nose) and gas chromatography-ion mobility spectrometry (GC-IMS) techniques, and characteristic volatile fingerprints were constructed to clarify the differences in the main flavour substances in different foxtail millet varieties (two hybrids and two conventional foxtail millets). After sensory evaluation by judges, Jingu 21 (JG) scored significantly higher than the other varieties, and the others were, in order, Jinmiao K1 (JM), Changzagu 466 (CZ) and Zhangzagu 3 (ZZ). E-Nose analysis showed differences in sulphides and terpenoids, nitrogen oxides, organosulphides and aromatic compounds in different varieties of millet porridge. A total of 59 volatile components were determined by GC-IMS in the four varieties of millet porridge, including 23 aldehydes, 17 alcohols, 9 ketones, 4 esters, 2 acids, 3 furans and 1 pyrazine. Comparative analyses of the volatile components in JG, JM, ZZ and CZ revealed that the contents of octanal, nonanal and 3-methyl-2-butenal were higher in JG; the contents of trans-2-butenal, 2-methyl-1-propanol, trans-2-heptenal and trans-2-pentenal were higher in JM; and the contents of 2-octanone, hexanol, 1-octen-3-ol, 2-pentanone and butyraldehyde were higher in ZZ. The contents of 2-butanol, propionic acid and acetic acid were higher in CZ. A prediction model with good stability was established by orthogonal partial least squares discriminant analysis (OPLS-DA), and 25 potential characteristic markers (VIP > 1) were screened out from 59 volatile organic compounds (VOCs). These volatile components can be used to distinguish the different varieties of millet porridge samples. Moreover, we found conventional foxtail millet contained more aldehydes than the hybridised foxtail millet; especially decanal, 1-nonanal-D, heptanal-D, 1-octanal-M, 1-octanal-D and 1-nonanal-M were significantly higher in JG than in the other varieties. These results indicate that the E-Nose combined with GC-IMS can be used to characterise the flavour volatiles of different foxtail millet, and the results of this study may provide some information for future understanding of the aroma characteristics of foxtail millet and the genetic improvement of hybrid grains.

A further understanding of changes of wheat bran functionality induced by different types of probiotics fermentation: From molecules to regulation mechanism

Wheat bran (WB) was solid-state fermented by either Lacticaseibacillus rhamnosus (LGG), Levilactobacillus brevis (LB) or Lactiplantibacillus plantarum (LP), respectively, and then their corresponding physicochemical and metabolic characteristics were investigated. Current study revealed fermentation of either Lacticaseibacillus rhamnosus or Lactiplantibacillus plantarum quickly generated lactic acid, but not for Levilactobacillus brevis. Importantly, all LAB fermentation promoted total phenolic acids contents, fermentation of LB-WB led to the greatest total phenolic content, followed by LGG-WB, with the least for LP-WB. Moreover, LGG fermentation significantly increased levels of oleic acid, stearic acid and phosphoenolpyruvic acid on carbon metabolism and fatty acid biosynthesis, while LB fermentation mainly increased levels of L-phenylalanine, cholecalciferol, D-gluconic acid and D-glucarate with the influence on the entire metabolic pathway. In contrast, LP fermentation significantly decreased levels of alpha-ketoglutaric acid, cis-aconitic acid on the citrate cycle (TCA cycle). This study revealed their corresponding metabolic characteristics, which might highlight potentially individual nutritional aspects.

Volatile Fingerprint and Differences in Volatile Compounds of Different Foxtail Millet (Setaria italica Beauv.) Varieties

Aroma components in foxtail millet are one of the key factors in origin traceability and quality control, and they are associated with consumer acceptance and the corresponding processing suitability. However, the volatile differences based on the foxtail millet varieties have not been studied further. The present study was undertaken to develop the characteristic volatile fingerprint and analyze the differences in volatile compounds of 20 foxtail millet varieties by electronic nose (E-Nose), headspace-gas chromatography-ion mobility spectrometry (HS-GC-IMS), and headspace solid-phase microextraction/gas chromatography-mass spectrometry (HS-SPME/GC-MS). A total of 43 volatile compounds were tentatively identified in foxtail millet samples, 34 and 18 by GC-IMS and GC-MS, respectively. Aldehydes, alcohols, and ketones were the major volatile compounds, and the hexanal content was the highest. The characteristic volatile fingerprint of foxtail millet was successfully constructed. A total of 39 common volatile compounds were found in all varieties. The content of hexanal, heptanal, 1-pentanol, acetophenone, 2-heptanone, and nonanal were explored to explain the aroma characteristics among the different varieties, and different varieties can be separated based on these components. The results demonstrate that the combination of E-Nose, GC-IMS, and GC-MS can be a fast and accurate method to identify the general aroma peculiarities of different foxtail millet varieties.

Structural analysis, nutritional evaluation, and flavor characterization of parched rice made from proso millet

This study investigated the structure and quality characteristics of hard and crispy parched rice obtained from raw proso millet through steaming, roasting, and milling. Results showed that thermal treatment disrupted the structure of samples and transformed the crystal from A-type in raw proso to V-type in parched rice. Rheological and thermodynamic analyses revealed that thermal treatment reduced the stability of parched rice. Gelatinization tests demonstrated that the parched rice was easier to gelatinize and had a lower viscosity. The digestibility of hard parched rice and crispy parched rice improved, with rapidly digestible starch content increasing by 73.62% and 76.95%, respectively, compared with that of raw proso millet. Headspace solid-phase microextraction/gas chromatography-mass spectrometry results further indicated that thermal treatment enhanced the flavor substances of parched rice. These findings demonstrated the unique properties of parched rice and supported its production and processing as a whole grain.

Uncovering the differences in flavor volatiles of different colored foxtail millets based on gas chromatography-ion migration spectrometry and chemometrics

The differences of volatile organic compounds in commercially available foxtail millets with different colors (black, green, white and yellow) were assayed through gas chromatography-ion migration spectrometry (GC-IMS) to explore their volatile flavor characteristics. Fifty-five volatile components were found in various colored foxtail millets, including 25 kinds of aldehydes (accounting for 39.19-48.69%), 10 ketones (25.36-32.37%), 15 alcohols (20.19-24.11%), 2 ethers (2.29-2.45%), 2 furans (1.49-2.95%) and 1 ester (0.27-0.39%). Aldehydes, alcohols and ketones were the chief volatiles in different colored foxtail millet, followed by furans, esters and ethers. These identified volatile flavor components in various colored foxtail millets obtained by GC-IMS could be well distinguished by principal components and cluster analysis. Meanwhile, a stable prediction model was fitted via partial least squares-discriminant analysis (PLS-DA), in which 17 kinds of differentially volatile components were screened out based on variable importance in projection (VIP>1). These findings might provide certain information for understanding the flavor traits of colored foxtail millets in future.

Characterization and discrimination of flavor volatiles of different colored wheat grains after cooking based on GC-IMS and chemometrics

Changes in flavor volatiles of three colored wheat grains (black, green, and yellow) after cooking were detected via gas chromatography-ion migration spectrometry (GC-IMS) to explore corresponding volatile flavor traits. A total of 52 volatile chemicals were spotted among these cooked wheat grains, including 30 aldehydes (accounting for 73.86-83.78%), 11 ketones (9.53-16.98%), 3 alcohols (0.88-1.21%), 4 furans (4.82-7.44%), 2 esters (0.28-0.42%), and 2 pyrazines (0.18-0.32%). Aldehydes, ketones, and furans were the main volatile compounds in three different cooked wheat. For black-colored wheat, the relative contents of benzene acetaldehyde, benzaldehyde, 2-methyl butanal, and 3-methyl butanal were much higher (p < 0.05). For green-colored wheat, the relative contents of nonanal, 2-pentyl furan, (E)-hept-2-enal, 2-butanone, and acetone were significantly higher (p < 0.05). For yellow-colored wheat, the relative amounts of heptanal, hexanal, and pentanal were much higher (p < 0.05). The overall volatile substances of the three cooked wheat grains might be classified by GC-IMS data coupled with principal component analysis and heatmap clustering analysis. A reliable forecast set was established through orthogonal partial least squares-discriminant analysis (OPLS-DA), and 22 differential volatile compounds were screened out based on variable importance in projection (VIP) being higher than 1.0, as flavor markers for distinguishing the three cooked wheat grains. These results suggest that GC-IMS could be used for characterizing the flavor volatiles of different colored wheat, and the findings could contribute certain information for understand the aroma traits in different colored cooked wheat and related products in the future.

Characterization of volatile organic compounds of different pigmented rice after puffing based on gas chromatography-ion migration spectrometry and chemometrics

The distinctness in volatile profiles of pigmented rice with various colors (black, green, purple, red, and yellow) after puffing were assayed through gas chromatography-ion migration spectrometry (GC-IMS) to explore their odor characteristics. Fifty-two volatile components were found in those puffed rice, including 27 kinds of aldehydes (accounting for 59.69-64.37 %), 9 ketones (25.55-29.73 %), 5 alcohols (2.45-5.29 %), 4 pyrazines (1.38-2.36 %), 3 ethers (0.81-1.27 %), 2 furans (0.95-1.39 %), 1 pyridine (1.0-1,16 %), and 1 pyrrole (0.59-0.71 %). Aldehydes and ketones were the two chief volatiles in different pigmented puffed rice. These identified volatile flavor components in various pigmented puffed rice obtained by GC-IMS might be well differentiated by principal component and cluster interpretation. Meanwhile, a stable prediction model was fitted via orthogonal partial least squares-discriminant analysis, and 19 differentially volatile components were screened out based on variable importance projection (VIP) above 1. These findings could add certain information for understanding the flavor profiles of pigmented puffed rice and related products.

Soilless Cultivated Halophyte Plants: Volatile, Nutritional, Phytochemical, and Biological Differences

The use of halophyte plants appears as a potential solution for degraded soil, food safety, freshwater scarcity, and coastal area utilization. These plants have been considered an alternative crop soilless agriculture for sustainable use of natural resources. There are few studies carried out with cultivated halophytes using a soilless cultivation system (SCS) that report their nutraceutical value, as well as their benefits on human health. The objective of this study was to evaluate and correlate the nutritional composition, volatile profile, phytochemical content, and biological activities of seven halophyte species cultivated using a SCS (Disphyma crassifolium L., Crithmum maritimum L., Inula crithmoides L., Mesembryanthemum crystallinum L., Mesembryanthemum nodiflorum L., Salicornia ramosissima J. Woods, and Sarcocornia fruticosa (Mill.) A. J. Scott.). Among these species, results showed that S. fruticosa had a higher content in protein (4.44 g/100 g FW), ash (5.70 g/100 g FW), salt (2.80 g/100 g FW), chloride (4.84 g/100 g FW), minerals (Na, K, Fe, Mg, Mn, Zn, Cu), total phenolics (0.33 mg GAE/g FW), and antioxidant activity (8.17 µmol TEAC/g FW). Regarding the phenolic classes, S. fruticosa and M. nodiflorum were predominant in the flavonoids, while M. crystallinum, C. maritimum, and S. ramosissima were in the phenolic acids. Moreover, S. fruticosa, S. ramosissima, M. nodiflorum, M. crystallinum, and I. crithmoides showed ACE-inhibitory activity, an important target control for hypertension. Concerning the volatile profile, C. maritimum, I. crithmoides, and D. crassifolium were abundant in terpenes and esters, while M. nodiflorum, S. fruticosa, and M. crystallinum were richer in alcohols and aldehydes, and S. ramosissima was richer in aldehydes. Considering the environmental and sustainable roles of cultivated halophytes using a SCS, these results indicate that these species could be considered an alternative to conventional table salt, due to their added nutritional and phytochemical composition, with potential contribution for the antioxidant and anti-hypertensive effects.

Thorough Characterization of ETHQB3.5, a QTL Involved in Melon Fruit Climacteric Behavior and Aroma Volatile Composition

The effect of the QTL involved in climacteric ripening ETHQB3.5 on the fruit VOC composition was studied using a set of Near-Isogenic Lines (NILs) containing overlapping introgressions from the Korean accession PI 16375 on the chromosome 3 in the climacteric 'Piel de Sapo' (PS) genetic background. ETHQB3.5 was mapped in an interval of 1.24 Mb that contained a NAC transcription factor. NIL fruits also showed differences in VOC composition belonging to acetate esters, non-acetate esters, and sulfur-derived families. Cosegregation of VOC composition (23 out of 48 total QTLs were mapped) and climacteric ripening was observed, suggesting a pleiotropic effect of ETHQB3.5. On the other hand, other VOCs (mainly alkanes, aldehydes, and ketones) showed a pattern of variation independent of ETHQB3.5 effects, indicating the presence of other genes controlling non-climacteric ripening VOCs. Network correlation analysis and hierarchical clustering found groups of highly correlated compounds and confirmed the involvement of the climacteric differences in compound classes and VOC differences. The modification of melon VOCs may be achieved with or without interfering with its physiological behavior, but it is likely that high relative concentrations of some type of ethylene-dependent esters could be achieved in climacteric cultivars.

Nutritional Components of Millet Porridge Cooked by Different Electric Cookers Based on Principal Component and Cluster Analyses

(1) Background: In order to study the effects of different electric cookers on the nutritional components of millet porridge, five different electric cookers (No. 1–5) were selected to cook millet porridge, then sensory and nutritional components in millet porridge, millet soup, and millet grains were analyzed; (2) Methods: Using principal component and cluster analysis, a variety of nutritional components were comprehensively compared; (3) Results: The results showed that among the different cooked samples, the content of amylose and reducing sugars was the highest in the samples cooked by electric cooker No. 3. The electric cooker No. 4 samples had the highest sensory evaluation score, crude fat, and protein content. The contents of ash, fatty acids, bound amino acids, and minerals were the highest in the electric cooker No. 5 samples. The sensory evaluation score and content of crude fat, ash, reducing sugars, direct starch, and Cu were higher in millet grains than in millet soup or porridge. The content of fatty acids, protein, amino acid, Zn, Fe, Mg, Mn, and Ca was highest in millet soup. Different electric cookers produced millet porridge with varying nutritional levels; (4) Conclusions: This study provides a reference for the further development of new electric cookers.

Analysis of Volatile Flavor Compounds of Corn Under Different Treatments by GC-MS and GC-IMS

To establish a rapid and accurate method for detecting volatile components of corn, which will guide the production of corn products beloved by consumers. The fingerprints of corns under different treatments, including native, washing, blanching, precooling, freezing, steaming, boiling, frying, and freeze-drying, were depicted via gas chromatography ion mobility spectrometry (GC-IMS) and gas chromatography-mass spectrometry (GC-MS). It was found via the Venn diagram and relative odor activity value (ROAV) that n-hexanal, 1-octene-3-ol, decylaldehyde, and 2-pentylthiazole could be the key flavor compounds present in corns. In addition, according to volatile fingerprint characteristics and the aroma profile of sensory evaluation, it was found that corns could be divided into four categories, which was consistent with the results of GC-IMS. Also, the results of the sensory panel showed that steamed, boiled, and fried corns were much more popular than corns under other treatments with the panel. The results indicated that a rapid method to classify products was established by GC-IMS. A suitable processing technology could produce a specific flavor, and further refined research might be focused on finding the best way to process corns.

Effect of High-Pressure Treatment on the Quality of a Hericium erinaceus: Millet Composite Beverage

Hericiumerinaceus-millet (HM) composite beverage was prepared by mixing Hericium erinaceus juice and millet juice and then subjected to high-pressure processing (HPP) of 300 MPa and 600 MPa at room temperature and thermal processing (TP) of 100°C for 3 min. The differences in pH, total soluble solids, amino acid nitrogen content, total colony numbers, sensory scores, and shelf life of HPP-treated and TP-treated samples stored at 4°C, 27°C, and 37°C for 80 days and the differences in volatile substances stored at 4°C and 27°C for 30 days were studied. The results showed that there was no significant difference in total soluble solids, amino acid nitrogen, and pH when comparing HPP- and TP-treated HM beverages. The order of HM beverages’ shelf life following different treatments was as follows: TP-treated >600 MPa HPP-treated >300 MPa HPP-treated. When stored at 4°C, the shelf life of the three treatments was 63, 52, and 39 days, respectively. Compared with TP-treated beverages, HPP-treated beverages better retained their ester flavor compounds, especially ethyl acetate. Moreover, the main volatile compounds in TP-treated beverages changed more during storage than those in HPP-treated beverages. Overall, HPP-treated beverages had advantages in terms of flavor over TP-treated beverages.

Effect of Microbial Fermentation on the Fishy-Odor Compounds in Kelp (Laminaria japonica)

Kelp (Laminaria japonica) is an important marine resource with low cost and rich nutrition. However, its fishy odor has compromised consumer acceptance. In this study, the effects of fermentation with Lactobacillus plantarum FSB7, Pediococcus pentosaceus CICC 21862 and Saccharomyces cerevisiae SK1.008 on fishy notes in kelp was studied using gas chromatography-mass spectrometry (GC-MS), gas chromatography-ion mobility spectrometry (GC-IMS) and odor activity values (OAVs). Forty-four volatile organic compounds (VOCs) were identified in unfermented kelp, most of which were aldehydes, followed by alkanes, alcohols and ketones. Among them were 19 volatile compounds with OAV greater than one. Substances containing α,β-unsaturated carbonyl structure (1-Octen-3-one, (E,Z)-2,6-nonadienal, (E,E)-2,4-decadienal, etc.) are the main contributors to kelp fishy odor. The number of VOCs in kelp samples fermented by L. plantarum, P. pentosaceus and S. cerevisiae were decreased to 22, 24 and 34, respectively. GC-IMS shows that the fingerprint of the S. cerevisiae fermented sample had the most obvious changes. The disappearance of 1-octen-3-one and a 91% decrease in unsaturated aldehydes indicate that S. cerevisiae was the most effective, while L. plantarum and P. pentosaceus only reached 43-55%. The decrease in kelp fishy notes was related to the decrease in α,β-unsaturated carbonyl groups. The experimental results show that odor reduction with fermentation is feasible.

Nutritional Significance and Antioxidant-Mediated Antiaging Effects of Finger Millet: Molecular Insights and Prospects

Aging is a multifaceted process that is associated with progressive, lethal, and unalterable changes like damage to different molecules (DNA, proteins, and lipids), cells, tissues, and organs. It is an inevitable process but can be delayed by both genetic and dietary interventions. Besides aging, premature death and age-associated diseases can be dealt with diet regulation and the use of compounds that inhibit the stress responsiveness or promote the damage repair signaling pathways. Natural compounds offer a repertoire of highly diverse structural scaffolds that can offer hopeful candidate chemical entities with antiaging potential. One such source of natural compounds is millets, which are minor cereals with an abundance of high fiber, methionine, calcium, iron, polyphenols, and secondary metabolites, responsible for numerous potential health benefits. The present review article elucidates the nature and significance of different phytochemicals derived from millets with a major focus on finger millet and highlights all the important studies supporting their health benefits with special emphasis on the antiaging effect of these compounds. The present article also proposes the possible mechanisms through which millets can play a significant role in the suppression of aging processes and aging-related diseases by influencing genetic repair, protein glycation, and stress-responsive pathways. We further discuss well-established natural compounds for their use as antiaging drugs and recommend raising awareness for designing novel formulations/combinations from them so that their maximum antiaging potential can be harnessed for the benefit of mankind.

Analysis of volatile flavor compounds of green wheat under different treatments by GC-MS and GC-IMS

Volatile components in green wheat under different treatments including raw, washing, blanching, precooling, freezing, steaming, boiling, frying, and freeze-drying were evaluated by gas chromatography-ion mobility spectroscopy (GC-IMS) and gas chromatography-mass spectrometry (GC-MS). Five key aroma substances including n-hexanal, benzaldehyde, nonanal, 2-pentylfuran, and (E)-oct-2-enal were found by Venn diagram and odor activity values (OAV). Furthermore, according to volatile fingerprints characteristics and the aroma profile of sensory evaluation, it was found that green wheat under different treatments mainly presented seven characteristic flavor notes including sweet flowers, fat fragrance, mushroom hay, waxy aldehyde, citrus fruity, vegetable-like bean, and bitter almond from the sensory evaluation, and they could be divided into four categories, which was consistent with the results of PCA and GC-IMS. Hence, the volatile compounds of green wheat samples could be visualized and identified quickly via GC-IMS and the samples could be clearly classified based on the difference of volatile compounds. PRACTICAL APPLICATIONS: In the study, fingerprints coupled with cluster analysis were a visualized method for the identification of volatile compounds. Meanwhile, a new method, Venn diagram with OAV, was used to identify the key aroma of products. Finally, a rapid method to classify products by GC-IMS was performed. In future practical applications, GC-IMS can be used to classify products from different origins and different manufacturers. Similarly, it can identify fake and inferior products and whether the products have deteriorated. In addition, this research will provide a new strategy to find the relationship between flavor compounds and various processed technologies toward different cereals.

Pretreatments for enhanced biomethane production from buckwheat hull: Effects on organic matter degradation and process sustainability

Buckwheat manufacturing produce a large amount of lignocellulosic residue (buckwheat hull), which could be used as substrate in anaerobic digestion, even if hard lignocellulosic structure represents the main obstacle for its degradation. This study presents the results of a laboratory experiment conducted to evaluate the effects of different pretreatments on buckwheat hull anaerobic digestion. To achieve the aim, five pretreatments (alkaline, thermo-alkaline, microwave, ultrasonication and low temperature thermal pretreatment) were studied and the results were compared to non treated buckwheat hull. Cumulative biomethane yields significantly increased after alkaline and thermo-alkaline pretreatments (+61% and +122% with respect to non treated hull, respectively). These results were mainly related to organic matter solubilisation (+772% and +859% of soluble reducing sugars, respectively) and lignin, hemicellulose and cellulose degradation. Overall, process parameters behaviour and digestate quality were not affected by the pretreatments. Alkaline and thermo-alkaline pretreatments were evaluated for their energetic and economic affordability, showing that combination of thermal and alkaline pretreatments ensures significant advantages.

Production of an innovative mixed Qu (fermentation starter) for waxy maize brewing and comparison of the quality of different waxy maize wines

BACKGROUND

Waxy maize (Zea mays L. sinensis Kulesh) is a good material for brewing. Waxy maize wine, a kind of Chinese rice wine, is strongly affected by a fermentation starter named Qu. In this study, an innovative mixed Qu, consisting of two yeasts and three molds, was produced and the raw-starch brewing method was applied in winemaking. Three other waxy maize wines fermented by three kinds of commercial Qu were also analyzed for comparison.

RESULTS

Due to superb growth and fermentation characteristics, Saccharomyces cerevisiae CICC1009 and Pichia anomala CICC1851 were chosen to produce yeast Qu. The addition amount of yeast Qu was determined to be 30 g kg^-1 . In terms of chemical properties, mixed Qu was more suitable for making maize wine by the raw-starch brewing method than the three kinds of commercial Qu with which it was compared. The most influential components for the overall aroma profile in maize wines fermented by mixed Qu and Mifeng Qu were ethyl butyrate and β-damascenone, respectively, while in maize wines fermented by Angel Qu and Like Qu the most influential component was ethyl octanoate. Obvious differences were found among four maize wines regarding bitterness, umami, richness, saltiness, and sourness by the electronic tongue. The olfactory characteristics of maize wine fermented by Mifeng Qu were quite different from the other three according to the electronic nose.

CONCLUSION

The innovative mixed Qu can be considered as an excellent starter for raw-starch brewing of waxy maize. The chemical indices and volatile flavor compounds of waxy maize wines were greatly affected by different kinds of Qu. © 2020 Society of Chemical Industry.

Characterizing the volatile compounds of different sorghum cultivars by both GC-MS and HS-GC-IMS

The current study applied both GC-MS and GC-IMS for characterizing the volatile compounds of six Australian sorghum cultivars. For raw sorghum, the result of GC-MS showed that the ester compounds were abundant in six raw samples. Among these esters, the content of hexadecanoic acid ethyl ester was highest in all of the raw samples. Compound 3-octanone only existed in Apollo, Bazley and Liberty, and 2-undecanone was found to be in MR43. The result of GC-IMS showed that the signals of benzaldehyde, 2,3-butanedione were generally noted in the six raw samples. In general, The Apollo and Buster had more volatile compounds, followed by Bazley and Liberty. In contrast, MR43 and G44 had the least volatile compounds. For cooked sorghums, more fatty aldehydes are formed compared to its corresponding raw sample, in which the current data indicated that 40 volatile compounds were identified by GC-MS, and 11 of them were identified as the key aroma compounds (OAVs > 1). More important, the variation in the compounds of hexanal, heptanal, octanal, 2-heptenal, nonanal, trans- 2-octenal, benzeneaceldehyde, (E)-2-nonenal, 1-octen-3-ol, 1-pentanol, 2-methoxy-4-vinylphenol and 2-pentylfuran might be applied for explaining the aroma characteristics among the six sorghum cultivars. The result of GC-IMS showed that 26 volatile compounds but not in the results from GC-MS detection, indicating the advantage of the methodology combination for a better understanding the impact of cultivars and cooking on volatile characteristics of the sorghums.

Treatment of Peroxidase Derived from Foxtail Millet Bran Attenuates Atherosclerosis by Inhibition of CD36 and STAT3 in Vitro and in Vivo

Atherosclerosis is one of the main causes of cardiovascular diseases. Our previous study indicated that a type of peroxidase derived from foxtail millet bran (FMBP) had prominent antitumor activities. In the present study, we found that FMBP had potential antiatherosclerosis effects. The results showed that FMBP treatment strongly suppressed lipid phagocytosis in both HASMCs and THP-1 cells by 52% and 49%, respectively. Further, FMBP significantly inhibited HASMCs migration by promoting transformation of HASMCs from synthetic to contractile, leading to the decrease of lipid phagocytosis. Simultaneously, FMBP repressed lipid uptake by reducing the expression of CD36 in THP-1 cells. In addition, FMBP reduced the secretion of inflammatory factor IL-1β by inhibiting the expression of STAT3 in THP-1 cells. Interestingly, FMBP also had the same effects in models of atherosclerosis constructed with ApoE-/- mice, including decreased aortic lesion area, repressed aortic sinus CD36 and STAT3 expression, and elevated serum HDL-C concentration. Collectively, these results indicate that FMBP has great potential in preventing the development of atherosclerosis.

Effect of Foliar Spray Application of Zinc Oxide Nanoparticles on Quantitative, Nutritional, and Physiological Parameters of Foxtail Millet (Setaria italica L.) under Field Conditions

It has been shown that the foliar application of inorganic nano-materials on cereal plants during their growth cycle enhances the rate of plant productivity by providing a micro-nutrient source. We therefore studied the effects of foliarly applied ZnO nanoparticles (ZnO NPs) on Setaria italica L. foxtail millet's quantitative, nutritional, and physiological parameters. Scanning electron microscopy showed that the ZnO NPs have an average particle size under 20 nm and dominant spherically shaped morphology. Energy dispersive X-ray spectrometry then confirmed ZnO NP homogeneity, and X-ray diffraction verified their high crystalline and wurtzite-structure symmetry. Although plant height, thousand grain weight, and grain yield quantitative parameters did not differ statistically between ZnO NP-treated and untreated plants, the ZnO NP-treated plant grains had significantly higher oil and total nitrogen contents and significantly lower crop water stress index (CWSI). This highlights that the slow-releasing nano-fertilizer improves plant physiological properties and various grain nutritional parameters, and its application is therefore especially beneficial for progressive nanomaterial-based industries.

The influence of cooking on the antioxidant properties and polyphenol content in buckwheat, barley and millet groats and the transfer of the compounds to the water

The research subject was the influence of the cooking process on the polyphenol content and antioxidant properties of groats (buckwheat groats, barley groats, millet groats) and on the colour parameters of the products. After groats cooking, also the water was tested for the polyphenol content and antioxidant properties that permeated into the decoction of the cooked raw material. The evaluation of the antioxidant properties of groats was conducted with the DPPH radical assay, the polyphenol content was determined with the Folin-Ciocalteu reagent, and the colour was determined with the trichromatic colorimetry method using the Konica Minolta CM-5 colorimeter (Osaka, Japan). The cooking process significantly lowered the content of polyphenolic compounds and antioxidant properties of the ready products. The best antioxidant properties after cooking were found in buckwheat groats and the weakest in millet groats. The polyphenol content in cooked products depended on the type of groats. Cooking significantly decreased the polyphenol content, but only in buckwheat and barley groats, as well as causing a change of groats colour as compared to uncooked samples. The most antioxidant properties were found in the water from cooking barley groats, and the least - from cooking millet groats. The most polyphenols permeated into the water from cooking buckwheat groats, and the least from cooking millet groats. All groats, except millet groats, darkened after cooking. In all types of groats, the correlation coefficients between colour parameter and general polyphenol content and the ability to scavenge DPPH radicals showed very strong negative dependences. The conducted research can help in designing the technological process of cooking buckwheat, barley and millet groats, and a way of using the water from cooked groats for consumption.

Identification of volatile compounds and odour activity values in quinoa porridge by gas chromatography-mass spectrometry

BACKGROUND

Quinoa porridge is becoming popular among Asian for its nutritional values; hence, it is important to understand its aroma characteristics.

RESULTS

Volatile compounds in porridge of 30 quinoa varieties were determined by gas chromatography-mass spectrometry combined with headspace-solid phase micro-extraction. In total, 53 volatile compounds were detected and grouped into 14 alkanals, four alcohols, seven ketones, 10 alkanes, 10 acids and esters, and eight heterocycles. The relative content of alkanes (22.97%), acids and esters (44.33%) was comparatively high, although alkanals (11.75%) may dominate the aroma. Most of the compounds were similar with respect to types and numbers, although they varied in amount, whereas 11 compounds varied significantly among different varieties. The 30 varieties could be divided into eight groups based on the concentrations of volatile compounds, although the same varieties would be divided into four groups if based on the relative odour activity values of twelve variable aroma compounds.

CONCLUSION

Nine compounds were identified as the main contributors to the quinoa porridge aroma, including hexanal, 1-octen-3-ol, 2-pentylfuran, nonanal, (E,E)-2,4-decadienal and 6,10-dimethyl-5,9-undecadien-2-one. Heptanal, benzeneacetaldehyde and decanal may play roles in harmonizing the overall aroma. It is also interesting to note that 6,10,14-trimethyl-2-pentadecanone, with a slightly fatty aroma, showed a high content in all varieties. © 2019 Society of Chemical Industry.

The Proof-of-the-Concept of Application of Pelletization for Mitigation of Volatile Organic Compounds Emissions from Carbonized Refuse-Derived Fuel

Waste can be effectively reused through the production of carbonized refuse-derived fuel (CRDF) that enables further energy recovery. Developing cleaner production of CRDF requires consideration of practical issues of storage and handling. Thus, it needs to be ensured that CRDF does not pose an excessive risk to humans and the ecosystem. Very few studies indicate a wide variety of volatile organic compounds (VOCs) are present in CRDF, some of which are toxic. During handling, storage, transportation, and use of VOC-rich CRDF, workers and end-users could be exposed to emissions that could pose a health and safety hazard. Our recent study shows that CRDF densification via pelletization can increase the efficiency of storage and transportation. Thus, the following research question was identified: can pelletization mitigate VOCs emissions from CRDF during storage? Preliminary research aiming at the determination of the influence of CRDF pelletization on VOCs emission during storage was completed to address this question. The VOCs emissions from two types of CRDF: ground (loose, torrefied refuse-derived fuel (RDF)) and pelletized, were measured. Pelletization reduced the VOCs emissions potential during the four-day storage by ~86%, in comparison with ground CRDF. Mitigation of VOCs emissions from densified CRDF is feasible, and research is warranted to understand the influence of structural modification on VOCs emission kinetics, and possibilities of scaling up this solution into the practice of cleaner storage and transportation of CRDF.

Fermented and malted millet products in Africa: Expedition from traditional/ethnic foods to industrial value-added products

With the prevalent food insecurity in Africa, there is a growing need to utilize the available crops to develop nutritious, affordable and palatable food for the populace. Millet is critical in this role, relative to its abundance in the continent and good nutritional composition. For ages, fermentation and malting have been traditionally used to transform millet into variety of produce. A paradigm shift has however occurred over the years, giving birth to new commercially available products. This review thus appraises and gives an overview of traditional and modern fermented and malted products. Although, millet has been diversified to several products, its major food uses are still restrained to traditional consumers and largely remains underutilized. Considering the potential embedded in this grain, it is important to explore this crop through the application of appropriate modern fermentation and malting technologies. This will ensure the availability of ready to eat (RTE) and ready to use (RTU) food products and to a large extent address the incessant food security challenges plaguing Africa.

Sensory Characteristics and Volatile Components of Dry Dog Foods Manufactured with Sorghum Fractions

Descriptive sensory analysis and gas chromatography-mass spectrometry (GC-MS) with a modified headspace solid-phase microextraction (SPME) method was performed on three extruded dry dog food diets manufactured with different fractions of red sorghum and a control diet containing corn, brewer's rice, and wheat as a grain source in order to determine the effect of sorghum fractions on dry dog food sensory properties. The aroma compounds and flavor profiles of samples were similar with small differences, such as higher toasted aroma notes, and musty and dusty flavor in the mill-feed sample. A total of 37 compounds were tentatively identified and semi-quantified. Aldehydes were the major group present in the samples. The total volatile concentration was low, reflecting the mild aroma of the samples. Partial least squares regression was performed to identify correlations between sensory characteristics and detected aroma compounds. Possible relationships, such as hexanal and oxidized oil, and broth aromatics were identified. Volatile compounds were also associated with earthy, musty, and meaty aromas and flavor notes. This study showed that extruded dry dog foods manufactured with different red sorghum fractions had similar aroma, flavor, and volatile profiles.

Thermal Hazard Evaluation of Cumene Hydroperoxide-Metal Ion Mixture Using DSC, TAM III, and GC/MS

Cumene hydroperoxide (CHP) is widely used in chemical processes, mainly as an initiator for the polymerization of acrylonitrile–butadiene–styrene. It is a typical organic peroxide and an explosive substance. It is susceptible to thermal decomposition and is readily affected by contamination; moreover, it has high thermal sensitivity. The reactor tank, transit storage vessel, and pipeline used for manufacturing and transporting this substance are made of metal. Metal containers used in chemical processes can be damaged through aging, wear, erosion, and corrosion; furthermore, the containers might release metal ions. In a metal pipeline, CHP may cause incompatibility reactions because of catalyzed exothermic reactions. This paper discusses and elucidates the potential thermal hazard of a mixture of CHP and an incompatible material’s metal ions. Differential scanning calorimetry (DSC) and thermal activity monitor III (TAM III) were employed to preliminarily explore and narrate the thermal hazard at the constant temperature environment. The substance was diluted and analyzed by using a gas chromatography spectrometer (GC) and gas chromatography/mass spectrometer (GC/MS) to determine the effect of thermal cracking and metal ions of CHP. The thermokinetic parameter values obtained from the experiments are discussed; the results can be used for designing an inherently safer process. As a result, the paper finds that the most hazards are in the reaction of CHP with Fe²⁺. When the metal release is exothermic in advance, the system temperature increases, even leading to uncontrollable levels, and the process may slip out of control.

Analytical methods for volatile compounds in wheat bread

Bread aroma is one of the main requirements for its acceptance by consumers, since it is one of the first attributes perceived. Sensory analysis, crucial to be correlated with human perception, presents limitations and needs to be complemented with instrumental analysis. Gas chromatography coupled to mass spectrometry is usually selected as the technique to determine bread volatile compounds, although proton-transfer reaction mass spectrometry begins also to be used to monitor aroma processes. Solvent extraction, supercritical fluid extraction and headspace analysis are the main options for the sample treatment. The present review focuses on the different sample treatments and instrumental alternatives reported in the literature to analyse volatile compounds in wheat bread, providing advantages and limitations. Usual parameters employed in these analytical methods are also described.

Volatile compounds in dry dog foods and their influence on sensory aromatic profile

The aim of this study was to determine volatile compounds in dry dog foods and their possible influence on sensory aromatic profile. Grain-free dry dog foods were compared to dry dog foods manufactured with grain, but also with different protein sources for their aromatic volatiles. Solid-phase microextraction/gas chromatography/mass spectrometry was used to determine the aromatic compounds present in the headspace of these samples. Partial Least Squares regression was performed to correlate the instrumental aromatic data with the descriptive aroma analysis data. A total of 54 aromatic compounds were tentatively identified in the dry dog food samples, with aldehydes and ketones being the most represented organic volatiles group. Grain-added products were on the average higher in total volatiles than grain-free products. Partial Least Squares regression analysis indicated possible connections with sensory aromatic profile and grain-added samples, such as rancid aroma and aldehydes, especially hexanal. The results of this study showed that dry dog foods are products with complex odor characteristics and that grain-free products are less aromatic.