Optimization of Ultrasound-Assisted Extraction of Antioxidants from the Mung Bean Coat

Utilizing ultrasound for the extraction of polysaccharides from the tuber of Typhonium giganteum Engl.: Extraction conditions, structural characterization and bioactivities

Polysaccharides from the dried tuber of Typhonium giganteum Engl. (TGEPs) were obtained by utilizing ultrasonic-assisted extraction (UAE) as the extraction method. The determination of optimal process parameters for the UAE of TGEPs (TGEP-U) was accomplished through the application of response surface methodology (RSM). The structural characteristics, antioxidant and hypoglycemic effects of TGEP-U and TGEPs obtained by hot water extraction (TGEP-H) were then compared. Consequently, the optimum extraction conditions predicted by RSM for TGEP-U were obtained as adding water at a ratio of 31 mL/g and extracted for 32 min under an ultrasound power of 440 W. In the verification experiment, the actual yield of TGEP-U was 7.32 ± 0.18 %. It was found that UAE could increase the yield and the total sugar content of TGEPs. Meanwhile, chemical composition analysis showed that both TGEP-U and TGEP-H were mainly composed of mannose, rhamnose, glucuronic acid, galacturonic acid, glucose, galactose, arabinose, and fucose, but the monosaccharide molar ratios were changed by UAE. Analysis of molecular weight (Mw) revealed the presence of three primary constituents within TGEP-U, and four main components in TGEP-H, and UAE reduced the average Mw of TGEPs. No obvious difference was found in the Fourier transform infrared spectroscopy analysis of TGEP-U and TGEP-H. The Congo red and Circular dichroism tests demonstrated that TGEP-U and TGEP-H had non-three helical structure. Scanning electron microscope observation further revealed that the aggregation of functional groups within TGEPs may be influenced by ultrasound, thereby affecting their powder morphology. TGEP-U has slightly poorer thermal stability than TGEP-H, which may be affected by ultrasonic cavitation effects. The results also indicated that TGEP-U had better antioxidant and hypoglycemic activity than TGEP-H. In summary, UAE is an effective method to extract and enhance the activity of TGEPs with enormous research value and potentials.

Preparation, characteristics and antioxidant activity of mung bean peel polysaccharides

The mung bean peel polysaccharide (MBP) extracted by hot water was chemically modified. By changing the dosage of phosphorylation reagent and acetylation reagent, three kinds of phosphorylated MBP ( P-MBP-1, P-MBP-2, P-MBP-3 ) and acetylated MBP ( AC 0.6-MBP, AC 1-MBP, AC 1.4-MBP ) with different degrees of substitution were prepared. By measuring the sugar content and substitution degree of the modified products, it was found that the amount of reagent had a certain effect on both of them. The modified products were determined by infrared spectrum and nuclear magnetic resonance. The results showed that the chemical modification was successful. The in vitro antioxidant capacity (·OH scavenging ability, O2-·clearing ability, reducing capacity, resistance to lipid peroxidation) of seven polysaccharide were measured, which manifested that chemical modification could enhance the antioxidant ability of MBP to varying degrees, and the DS also had a certain impact on their antioxidant activity. This promoted the development of mung bean peel polysaccharide functional products and the utilization of mung bean peel resources.

Effects of Purified Vitexin and Iso-Vitexin from Mung Bean Seed Coat on Antihyperglycemic Activity and Gut Microbiota in Overweight Individuals' Modulation

Exceeding a healthy weight significantly elevates the likelihood of developing type 2 diabetes (T2DM). A commercially available singular constituent, available as either purified vitexin or iso-vitexin, has been associated with a decreased risk of T2DM, but its synergistic effect has not been reported yet. Vitexin and iso-vitexin were extracted using an ethanol-based solvent from mung bean seed coat (MBCE) and subsequently purified using preparative liquid chromatography (Prep-LC). Eleven mixture ratios of vitexin and/or iso-vitexin were determined for their antioxidant and antihyperglycemic activities. The 1:1.5 ratio of vitexin to iso-vitexin from MBCE demonstrated the most synergistic effects for enzyme inhibition and glucose uptake in HepG2 cells within an insulin-resistant system, while these ratios exhibited a significantly lower antioxidant capacity than that of each individual component. In a gut model system, the ratio of 1:1.5 (vitexin and iso-vitexin) regulated the gut microbiota composition in overweight individuals by decreasing the growth of Enterobacteriaceae and Enterococcaceae, while increasing in Ruminococcaceae and Lachnospiraceae. The application of vitexin/iso-vitexin for 24 h fermentation enhanced a high variety of abundances of 21 genera resulting in five genera of Parabacteroides, Ruminococcus, Roseburia, Enterocloster, and Peptacetobacter, which belonged to the phylum Firmicutes, exhibiting high abundant changes of more than 5%. Only two genera of Proteus and Butyricicoccus belonging to Proteobacteria and Firmicutes decreased. The findings suggest that these phytochemicals interactions could have synergistic effects in regulating glycemia, through changes in antihyperglycemic activity and in the gut microbiota in overweight individuals. This optimal ratio can be utilized by industries to formulate more potent functional ingredients for functional foods and to create nutraceutical supplements aimed at reducing the risk of T2DM in overweight individuals.

Ultrasonic-assisted extraction to enhance the recovery of bioactive phenolic compounds from Commiphora gileadensis leaves

The "ultrasonic-assisted extraction (UAE)" method was utilized in this work to assess how different process parameters affected the yield and recovery of phenolic compounds from the leaf of Commiphora gileadensis, which is one of the medicinal plants with a variety of biological functions. Its leaf is used for a various of therapeutic applications, such as the treatment of bacterial infections, inflammation, and wound healing. The "One-Factor-At-a-Time (OFAT)" approach was employed to examine the impacts of various UAE process parameters on the process of extraction, which include time of extraction, sample/solvent ratio, ultrasonic frequency, and solvent (ethanol) concentration. The extracts were then investigated for the presence of several phytochemicals using analytical techniques such as "Gas Chromatography-Mass Spectroscopy (GC-MS)" and "Fourier Transform Infrared Spectroscopy (FTIR)" studies. The findings showed that the maximum extraction yield, the total phenolic content (TPC), and the total flavonoids content (TFC) of the ethanolic extract of the leaves of C. gileadensis using the UAE method were at 31.80 ± 0.41 %, 96.55 ± 2.81 mg GAE/g d.w. and 31.66 ± 2.01 mg QE/g d.w. accordingly under a procedure duration of 15 min, ultrasonic frequency of 20 kHz, solvent/sample ratio of 1:20 g/mL, and solvent concentration of 40 % v/v. The leaves extract of C. gileadensis included 25 phenolic compounds that were previously unreported, and GC-MS analysis confirmed their presence. Hence, it follows that the UAE technique can successfully extract the phytochemicals from C. gileadensis for a variety of therapeutic uses.

Microscopic characterization, TLC fingerprinting and optimization of total lipid content from Euphorbia neriifolia (L.) using response surface methodology

Euphorbia neriifolia (EN) is a medicinal plant used to treat a variety of ailments in traditional systems. Despite numerous studies on pharmacological activities, no information was available on the microscopic study of this plant. This is the first study that has been attempted to fill this need by performing the light and field emission scanning electron microscopy (FESEM) of leaf, stem, and latex. The powder microscopy of several organs (leaves, stem, and bark) and exudate (latex) of EN was carried out using safranine, fast green, phloroglucinol, and other standard solutions at different magnifications. The chemical fingerprinting of petroleum ether extract was accomplished by using thin layer chromatography. The optimization of total lipid content from the EN leaf under ultrasound-assisted extraction (UAE) and soxhlet extraction (SE) procedure was determined using response surface methodology (RSM). The studied factors that affect the lipid content were: solvent ratio, extraction temperature, and extraction time. Several notable characteristics observed in the leaf of EN are amphistomatic leaves with anticlinical cell walls, anomocytic stomata, spongy mesophyll cells, elongated palisade cells, angular collenchyma, and U-shaped vascular bundle. The plano-convex midrib is covered by polygonal to oval-shaped cuticles and contains anomocytic stomata. The circular petiole has no trichomes and contains laticifers, crystals, and idioblasts. The circular stem was observed with trichomes, hypodermis, collenchyma, parenchymatous cells, central pith, pentagonal stellar region, cambium, and 2-4 times more xylem that of phloem. All of the powdered plant parts and exudate under study contained trichomes, xylem vessels, wood fibers, cork cells, starch grains, calcium oxalate crystals, idioblasts, lignified cork, tannin content, stone cells, and oil globules. The blackish-green colored petroleum ether extract with semi-solid consistency showed the greatest percent (%) yield of 4% in the latex of EN. The thin layer chromatography (TLC) examination of petroleum ether extract of EN leaf produced a maximum 6 spots with Rf values of 0.16, 0.58, 0.62, 0.73, and 0.96 in the mobile phase of petroleum ether-acetone (8:2). In terms of optimization, the dark green colored UAE extract with semi-sticky consistency showed highest % yield of 4.5% whereas the yellowish green colored SE extract of sticky consistency showed the highest % yield of 4.9%. The findings showed that there were not many differences in the total lipid content between UAE (0.16%) and SE (0.11%). However, the best optimum condition for lipid content extraction analysis was obtained as follows: solvent ratio (PE:HE) 50:50, extraction temperature 50°C, extraction time 45 min for UAE, and solvent ratio (PE:HE) 60:40, extraction temperature 45°C, and extraction time of 24 h for SE. Hence, this study signifies the various noteworthy microscopic features along with the presence of different phytocompounds through TLC and best optimized condition for the extraction of lipids from different parts of EN. As no previous study has been reported, the outcomes obtained from the current study prove to be beneficial in the identification of species, quality control, and detection of any adulteration from the laboratory and commercial samples of EN. RESEARCH HIGHLIGHTS: The percent yield was found to be maximum in latex extract (4%). The leaf pet ether extract was separated into 6 bands with different Rf values. The extracted compounds from Euphorbia neriifolia leaves were categorized into non-polar heat tolerant. The highest total lipid yield (0.1119) was obtained at solvent ratios 60:40 of PE:HE (petroleum ether: petroleum hexane).

Deep Eutectic Solvents as New Extraction Media for Flavonoids in Mung Bean

Mung beans contain abundant flavonoids like vitexin and isovitexin, which contribute to their strong bioactivities, such as antioxidant effects, so efforts should focus on extracting bioactive flavonoids as well as aligning with the goal of green extraction for specific applications. Deep eutectic solvent coupled with ultrasound-assisted extraction (DES-UAE) was applied to extract flavonoids from mung beans, and eight different DESs were compared on the extraction yield. In addition, the traditional extraction method with 30% ethanol was performed as the reference. The results showed that ethylene glycol-glycolic acid achieved the highest yield among all the DESs, 1.6 times that of the reference values. Furthermore, the DES-UAE parameters were optimized as a 60 mL/g liquid-solid ratio, 30% water content in DES, 200 W ultrasonic power, 67 °C ultrasonic temperature, and 10 min extraction time, leading to the DES extract with the maximum extraction yield of 2339.45 ± 42.98 μg/g, and the significantly stronger DPPH and ABTS radical scavenging ability than the traditional extract. Therefore, employing DES and ultrasonic extraction together offers a green method for extracting flavonoids from mung beans, advancing the development and utilization of plant-derived effective components in a sustainable manner.

Optimization of ultrasound-assisted deep eutectic solvent extraction of bioactive compounds from pomegranate peel using response surface methodology

The efficient extraction of polyphenols from pomegranate peels using a deep eutectic solvent (DES) and ultrasound-assisted extraction (UAE) was investigated. A Box-Behnken design was used to investigate the effects of four independent variables (water content, liquid-to-solid ratio, ultrasonic power, and extraction time) on total polyphenol content (TPC), punicalagin content (PC), and ellagic acid content (EC). Optimized DES-based UAE conditions were as follows: TPC (water content, 29.30%; liquid-to-solid ratio, 53.50 mL/g; ultrasonic power, 238.20 W; extraction time, 29.50 min), PC (water content, 25.65%; liquid-to-solid ratio, 44.20 mL/g; ultrasonic power, 120 W; extraction time, 20 min), and EC (water content, 33.13%; liquid-to-solid ratio, 60 mL/g; ultrasonic power, 300 W; extraction time, 20 min). Under these optimal conditions, the experimental values for TPC, PC, and EC were 67.50 mg GAE/g, 130.65 mg/g, and 2.04 mg/g, respectively; these values were consistent with the predicted values.

Tuning the Bioactive Properties of Dunaliella salina Water Extracts by Ultrasound-Assisted Extraction

(1) Background: Microalgae are promising feedstock for obtaining valuable bioactive compounds. To facilitate the release of these important biomolecules from microalgae, effective cell disruption is usually necessary, where the use of ultrasound has achieved considerable popularity as an alternative to conventional methods. (2) Methods: This paper aims to evaluate the use of ultrasound technology in water medium as a green technology to recover high added-value compounds from Dunaliella salina and improve its sensory profile towards a high level of incorporation into novel food products. (3) Results: Among the variables, the solid concentration and extraction time have the most significant impact on the process. For the extraction of protein, or fat, the most influential factor is the extraction time. Total polyphenols are only significantly affected by the extraction time. The antioxidant capacity is strongly affected by the solid to liquid ratio and, to a small extent, by the extraction time. Ultrasound-assisted extraction improves the overall odor/aroma of D. salina with good acceptability by the panelists. (4) Conclusions: The application of ultrasonic-assisted extraction demonstrates a positive overall effect on enhancing the sensory profile, particularly the odor of microalgal biomass, while the bioactive properties are preserved. Notably, the intense sea/fish odors are reduced, while earthy and citrus notes become more prominent, resulting in an improved overall sensory profile score. This is the first time, to our knowledge, that this innovative, green, and efficient technology has been used to upgrade the aroma profile of microalgae.

Ultrasonic-assisted extraction, analysis and properties of mung bean peel polysaccharide

In order to improve the yield of mung bean peel polysaccharide, on the basis of single-factor experiments, the ultrasonic assisted extraction conditions were optimized by response surface methodology (RSM). The results showed that under the conditions of material-liquid ratio of 1: 40, temperature 77 °C, ultrasonic power 216 W and extraction time 47 min, the extraction rate of mung bean peel polysaccharide was the best, which was 2.55 %. The extracted polysaccharide was phosphorylated and its antioxidant activity in vitro was studied. The results suggested that the modified polysaccharide had a significant scavenging effect on hydroxyl radicals and enhanced the ability of anti-lipid peroxidation, which offered ideas and methods for the development and application of mung bean peel polysaccharide.

Ultrasound-assisted extraction optimization of polyphenols from Boletus bicolor and evaluation of its antioxidant activity

Introduction

Boletus bicolor (B. bicolor) mushrooms are widely consumed as a valuable medicinal and dietary ingredient in China, but the active ingredients of this mushroom and their extraction methods were not extensively studied.

Methods

In this paper, we propose an optimized ultrasound-assisted extraction (UAE) method to detect natural antioxidant substances in B. bicolor. The antioxidants were quantitatively and quantitatively determined using UPLC-MS, the polyphenols were evaluated based on response surface methodology (RSM), and density functional theory (DFT) calculations were performed.

Results

The results showed that the optimal extraction was obtained under the following conditions: ethanol concentration 42%; solvent to solid ratio 34:1 mL/g; ultrasonic time 41 min; and temperature 40°C. The optimized experimental polyphenol value obtained under these conditions was (13.69 ± 0.13) mg/g, consistent with the predicted value of 13.72 mg/g. Eight phenolic compounds in the extract were identiffed by UPLC-MS: syringic acid, chlorogenic acid, gallic acid, rosmarinic acid, protocatechuic acid, catechin, caffeic acid, and quercetin. Chlorogenic acid exhibits the highest HOMO energy (−0.02744 eV) and the lowest energy difference (−0.23450 eV) among the studied compounds, suggesting that the compound might be the strongest antioxidant molecule. Eight phenolic compounds from the B. bicolor signiffcantly inhibited intracellular reactive oxygen species (ROS) generation, reduced oxidative stress damage in H2O2-induced HepG-2 cells.

Discussion

Therefore, it was confirmed that the UAE technique is an efficient, rapid, and simple approach for extracting polyphenols with antioxidant activity from B. bicolor.

Updating the status quo on the extraction of bioactive compounds in agro-products using a two-pot multivariate design. A comprehensive review

Extraction is regarded as the most crucial stage in analyzing bioactive compounds. Nonetheless, due to the intricacy of the matrix, numerous aspects must be optimized during the extraction of bioactive components. Although one variable at a time (OVAT) is mainly used, this is time-consuming and laborious. As a result, using an experimental design in the optimization process is beneficial with few experiments and low costs. This article critically reviewed two-pot multivariate techniques employed in extracting bioactive compounds in food in the last decade. First, a comparison of the parametric screening methods (factorial design, Taguchi, and Plackett-Burman design) was delved into, and its advantages and limitations in helping to select the critical extraction parameters were discussed. This was followed by a discussion of the response surface methodologies (central composite (CCD), Doehlert (DD), orthogonal array (OAD), mixture, D-optimal, and Box-Behnken designs (BBD), etc.), which are used to optimize the most critical variables in the extraction of bioactive compounds in food, providing a sequential comprehension of the linear and complex interactions and multiple responses and robustness tests. Next, the benefits, drawbacks, and possibilities of various response surface methodologies (RSM) and some of their usages were discussed, with food chemistry, analysis, and processing from the literature. Finally, extraction of food bioactive compounds using RSM was compared to artificial neural network modeling with their drawbacks discussed. We recommended that future experiments could compare these designs (BBD vs. CCD vs. DD, etc.) in the extraction of food-bioactive compounds. Besides, more research should be done comparing response surface methodologies and artificial neural networks regarding their practicality and limitations in extracting food-bioactive compounds.

Process Optimization of Phytoantioxidant and Photoprotective Compounds from Carob Pods (Ceratonia siliqua L.) Using Ultrasonic Assisted Extraction Method

The current study first describes the extraction of phytoantioxidant polyphenols from Carob byproducts (pods) using maceration and heating-assisted extraction as traditional methods and ultrasonic-assisted extraction (UAE) as an innovative method to determine the most efficient extraction process in terms of four targeted responses: total phenolic content (TPC), antioxidant activities (TAC and DPPH), and photoprotective properties as measured by the sun protection factor (SPF). Second, we used response surface methodology (RSM) with a central composite rotatable design (CCDR) approach to investigate the influence of process variables (extraction time, extraction temperature, and solvent concentration) on UAE, which was found to be the most effective extraction technique in our study. Carob byproduct extracts had a TPC ranging from 6.21 to 21.92 mg GAE/g dw, a TAC ranging from 22.00 to 49.30 mg AAE/g dw, DPPH scavenging activity ranging from 56.35 to 90.50%, and SPF values ranging from 8.62 to 22.37. The optimal UAE conditions for maximum TPC, TAC, DPPH, and SPF responses were determined to be 38.90% ethanol, 53.90 °C, and 50.92 min. Using Carob as a source for sustainable and bioactive products in conjunction with optimized UAE is a promising contribution to the cosmetic industry that will help to strengthen the concept of environmentally-friendly "green chemistry". Given that Carob pulp or seeds are considered food byproducts, the research presented here encourages the use of these agri-food waste materials in cosmetics.

An update on nutritional profile, phytochemical compounds, health benefits, and potential applications in the food industry of pulses seed coats: A comprehensive review

Pulses, as a sustainable source of nutrients, are an important choice for human diets, but vast quantities of seed coats generated in pulses processing are usually discarded or used as low-value ruminant feed. It has been demonstrated that pulses seed coats are excellent sources of dietary nutrients and phytochemicals with potential health benefits. With growing interest in the sustainable use of resources and the circular economy, utilization of pulses seed coats to recover these valuable components is a core objective for their valorization and an important step toward agricultural sustainability. This review comprehensively provides a comprehensive insight on the nutritional and phytochemical profiles presented in pulses seed coats and their health benefits obtained from the findings of in vitro and in vivo studies. Furthermore, in the food industry, pulses seed coats can be acted as potential food ingredients with nutritional, antioxidant and antimicrobial characteristics or as the matrix or active components of films for food packaging and edible coatings. A better understanding of pulses seed coats may provide a reference for increasing the overall added value and realizing the pulses' sustainable diets.

Green Extraction-Assisted Pseudo-Targeted Profile of Alkaloids in Lotus Seed Epicarp Based on UPLC-QTOF MS with IDA

Lotus seed epicarp, a byproduct of lotus, is commonly discarded directly or burned in the cropland, resulting in waste of resources and environmental pollution. In this work, a green ultrasonic-assisted extraction method with ethyl lactate as the extraction solvent was established to extract alkaloids from lotus seed epicarp. The extraction conditions were optimized by response surface methodology. Under the optimal extraction conditions, the extraction of alkaloids from 1 g lotus seed epicarp was accomplished with only 10 mL of extraction solvent within 15 min. Combined with ultrahigh-performance liquid chromatography coupled with quadrupole time-of-flight tandem mass spectrometry with information-dependent acquisition mode, a total of 42 alkaloids were annotated in the lotus seed epicarp extracts. Among them, 39 alkaloids were reported in lotus seed epicarp for the first time. According to quantitative analysis, the distributions and trends of alkaloids in the lotus seed epicarp were found to be similar to those of lotus leaves. The five growth stages of lotus seed epicarp could be successfully distinguished based on the ten representative alkaloids. This study demonstrates that ultrasonic-assisted extraction with ethyl lactate as extractant solvent was efficient in the extraction of alkaloids from lotus seed epicarp, which is a potential renewable resource of bioactive ingredients.

Ultrasound Assisted Extraction of Polyphenols from Ripe Carob Pods (Ceratonia siliqua L.): Combined Designs for Screening and Optimizing the Processing Parameters

Carob pulp has recently received great attention due to its considerable content of polyphenols having a wide range of health promoting effects. In this work, ultrasound assisted extraction was optimized sequentially using a screening Plackett–Burman design and non-standard central composite design coupled to response surface methodology and desirability function statistical tools, to find the best conditions for the extraction of nine polyphenols from carob pods. The gathered mathematical models showed that the highest significant factors influencing the extraction of all compounds were solid–solvent ratio, solvent concentration, and particle size, with the optimal results obtained at values of 0.2 g/mL, 40% ethanol, and 0.3 mm, respectively. Extraction temperature, time, sonication power, and frequency were set at 35 °C, 15 min, 100 W, and 37 kHz, respectively. These parameters help to reduce energy costs and to obtain the best possible extraction of polyphenols.

Development of a Green Methodology for Simultaneous Extraction of Polyphenols and Pigments from Red Winemaking Solid Wastes (Pomace) Using a Novel Glycerol-Sodium Benzoate Deep Eutectic Solvent and Ultrasonication Pretreatment

In this examination, two glycerol-based deep eutectic solvents (DESs) were tested for their efficiency in the recovery of antioxidant polyphenols and anthocyanin pigments from red grape pomace (RGP). The two DESs synthesized had sodium acetate and sodium benzoate as hydrogen bond acceptors, to test the role of the hydrogen bond acceptor polarity on the extraction performance. Furthermore, the process was enhanced by an ultrasonication pretreatment stage. After initial testing with respect to water content, ultrasonication power and liquid-to-solid ratio, the DES composed of glycerol and sodium benzoate (GL-SBz) was shown to be significantly more efficient than the one made of glycerol and sodium acetate (GL-SAc). Further optimization of the extraction with regard to time and temperature demonstrated GL-SBz to be a highly effective solvent for the production of RGP extracts rich in polyphenols including gallic acid, catechin and quercetin, and pigments including malvidin 3-O-glucoside p-coumarate and malvidin 3-O-glucoside. The extracts produced also had significantly higher antiradical activity and reducing power compared to those generated with aqueous ethanol or water. From this study, evidence emerged regarding the role of the hydrogen bond acceptor nature in the extraction efficiency of polyphenols. The process developed is proposed as a green, high-performing methodology for the production of RGP extracts with enhanced polyphenolic content and antioxidant activity.

Continuous and pulsed ultrasound-assisted extraction of carob's antioxidants: Processing parameters optimization and identification of polyphenolic composition

Polyphenols in carobs have recently attracted great attention due to their wide range of biological and health promoting effects. A comprehensive study was conducted to find an optimum method for the extraction, purification and characterization of these valuable bioactive substances. Under this framework, the ultrasound-assisted extraction (UAE) of polyphenols from carob pulp was optimized by the maximization of the yield in total phenolics using response surface methodology. In particular, the effects of solid-solvent ratio, solvent concentration, extraction time, sonication amplitude, and sonication mode were investigated and optimized using a complete experimental design. In comparison to conventional extraction techniques, UAE offered a higher yield of antioxidants and a shorter processing time. Solid-phase extraction was evaluated as a clean-up strategy prior to the electrophoretic analysis of extracts. The results from the analysis of real samples revealed the predominance of gallic acid and highlighted the great influence of the ripening stage on carobs composition.

Food Waste Biorefinery: Pathway towards Circular Bioeconomy

Food waste biorefineries for the production of biofuels, platform chemicals and other bio-based materials can significantly reduce a huge environmental burden and provide sustainable resources for the production of chemicals and materials. This will significantly contribute to the transition of the linear based economy to a more circular economy. A variety of chemicals, biofuels and materials can be produced from food waste by the integrated biorefinery approach. This enhances the bioeconomy and helps toward the design of more green, ecofriendly, and sustainable methods of material productions that contribute to sustainable development goals. The waste biorefinery is a tool to achieve a value-added product that can provide a better utilization of materials and resources while minimizing and/or eliminating environmental impacts. Recently, food waste biorefineries have gained momentum for the production of biofuels, chemicals, and bio-based materials due to the shifting of regulations and policies towards sustainable development. This review attempts to explore the state of the art of food waste biorefinery and the products associated with it.

Sustainable processing of food waste for production of bio-based products for circular bioeconomy

Sustainable development of circular bioeconomy concept is only possible upon adopting potential advanced technologies for food waste valorization. This approach can simultaneously answer resources and environmental challenges incurred due to capital loss and greenhouse gases accumulation. Food waste valorization opens new horizons of economical growth, bringing waste as an opportunity feedstock for bio processes to synthesize biobased products from biological source in a circular loop. Advanced technologies like Ultrasound assisted extraction, Microwave assisted extraction, bioreactors, enzyme immobilization assisted extraction and their combination mitigates the global concern caused due to mismanagement of food waste. Food waste decomposition to sub-zero level using advanced techniques fabricates food waste into bio-based products like bioactive compounds (antioxidants, pigments, polysaccharides, polyphenols, etc.); biofuels (biodiesel, biomethane, biohydrogen); and bioplastics. This review abridges merits and demerits of various advanced techniques extended for food waste valorization and contribution of food waste in revenue generation as value added products.

Green Extraction of Antioxidant Polyphenols from Green Tea (Camellia sinensis)

In this study, the feasibility of improving the extraction yield of green tea antioxidant polyphenols by the combination of ultrasound-assisted extraction (UAE) and deep eutectic solvents (DESs) was investigated. Choline chloride (ChCl)-glycerol was selected as the best DES among 12 ChCl-based DESs to extract tea antioxidant polyphenols. Subsequently, the influences of extraction parameters on total phenolic content (TPC) values were investigated, and liquid/solid ratio, ultrasonic power, and ultrasonic time were optimized based on the response surface methodology. The optimal extraction conditions were a liquid to solid ratio of 36:1 (mL/g), ultrasonic power of 461.5 W, and ultrasonic time of 21 min, with the highest TPC value of 243 ± 7 mg gallic acid equivalent (mg GAE)/g dry weight (DW), which was 13% higher than that before optimization. In addition, under the optimal extraction conditions, tea polyphenolic extract exhibited higher antioxidant activity compared with conventional extraction methods. Four major catechins in the green tea extracts, including (−)-epicatechin (EC), (−)-epigallocatechin (EGC), (−)-epicatechin gallate (ECG) and (−)-epigallocatechin gallate (EGCG) were identified and quantified by high-performance liquid chromatography. In addition, scanning electron microscopy (SEM) analysis revealed that UAE-DES effectively disrupted the green tea leaf cells, thereby improving tea polyphenol yield. In summary, UAE-DES is an ideal green extraction method for the extraction of tea antioxidant polyphenols.

State-of-the-Art Production Chains for Peas, Beans and Chickpeas-Valorization of Agro-Industrial Residues and Applications of Derived Extracts

The world is confronted with the depletion of natural resources due to their unsustainable use and the increasing size of populations. In this context, the efficient use of by-products, residues and wastes generated from agro-industrial and food processing opens the perspective for a wide range of benefits. In particular, legume residues are produced yearly in very large amounts and may represent an interesting source of plant proteins that contribute to satisfying the steadily increasing global protein demand. Innovative biorefinery extraction cascades may also enable the recovery of further bioactive molecules and fibers from these insufficiently tapped biomass streams. This review article gives a summary of the potential for the valorization of legume residual streams resulting from agro-industrial processing and more particularly for pea, green bean and chickpea by-products/wastes. Valuable information on the annual production volumes, geographical origin and state-of-the-art technologies for the extraction of proteins, fibers and other bioactive molecules from this source of biomass, is exhaustively listed and discussed. Finally, promising applications, already using the recovered fractions from pea, bean and chickpea residues for the formulation of feed, food, cosmetic and packaging products, are listed and discussed.

Dendropanax morbifera Leaf Polyphenolic Compounds: Optimal Extraction Using the Response Surface Method and Their Protective Effects against Alcohol-Induced Liver Damage

The response surface methodology was used to optimally extract the antioxidant substances from Dendropanax morbifera leaves. The central composite design was used to optimally analyze the effects of ethanol concentration, sample to solvent ratio, extraction temperature, and extraction time on the total flavonoids (TF) content, ferric reducing antioxidant power (FRAP), and Trolox equivalent antioxidant capacity (TEAC). All three parameters were largely influenced by the ethanol concentration and extraction temperature, while TEAC was also influenced by the sample to solvent ratio. The maximum values of TF content, FRAP, and TEAC were achieved under the following extraction conditions: 70% ethanol, 1:10 sample to solvent ratio, 80 °C, and 14 h. The D. morbifera leaf extracts (DMLE) produced under these optimum extraction conditions were investigated to determine their preventive effects on alcohol-induced liver injury. The DMLE was shown to prevent liver injury by scavenging the reactive oxygen species generated by alcohol. In addition, composition analysis of DMLE found high contents of chlorogenic acid and rutin that were determined to inhibit alcoholic liver injury. The findings of this study suggest that DMLE could prove useful as a functional food product supplement to prevent liver injury caused by excessive alcohol consumption.

Eco-friendly extraction and simultaneous determination of two coumarins in Justicia pectoralis (Acanthaceae)

Abstract Justicia pectoralis (Acanthaceae) is employed in folk medicine for its analgesic, anti-inflammatory and sedative effects and to treat respiratory diseases. It is known for properties of its coumarins, 1,2-benzopyrone and umbelliferone. A green, simple, fast, and inexpensive ultrasound-assisted extractive (UAE) method for extracting umbelliferone and 1,2-benzopyrone from Justicia pectoralis was optimized. Additionally, a HPLC analytical method was developed and validated for the simultaneous determination of both coumarins. The Box-Behnken design and response surface methodology were used to evaluate the UAE process. Ethanol concentration, extraction time, plant-to-solvent ratio were the independent variables studied and the coumarin content was the dependent one. The HPLC-UV/VIS method was validated in terms of recovery, linearity, accuracy, precision and robustness, proving to be valuable for the quality control of Justicia pectoralis extract and in the development of its herbal products. Results show that the optimal UAE conditions were: ethanol concentration of 15% (w/w), extraction time of 34 min and plant-to-solvent ratio of 0.1 g/mL. The predicted values of coumarin contents (22.16 µg/mL - umbelliferone and 163.86 µg/mL - benzopyrone) were determined under the optimal UAE conditions and proved that UAE is an efficient and eco-friendly extractive process for the production of aerial part extracts from Justicia pectoralis.

Ultrasound-assisted packed-bed extraction of hypericin from Hypericum perforatum L. and optimization by response surface methodology

This paper presents the successful application of ultrasound-assisted packed-bed (UAE-PB) method for the extraction of hypericin from the Hypericum perfuratum L. The Soxhlet system was utilized for the determination of suitable solvent from ethanol, methanol or from the mixture of different proportions of ethanol-methanol. The mixture of 50:50 v/v ethanol-methanol was obtained to be the most suitable solvent since it led to the highest extraction amount of hypericin. The extraction amount of hypericin increased by 13.6% and 21.4% when the solvent changed from pure methanol to the mixture of 50:50 v/v ethanol-methanol for the extraction time of 3 and 8 h, respectively. Subsequently, the extraction was conducted through the UAE-PB, and the effects of temperature, time, and the ratio of solvent to the dried plant were studied. The response surface method (RSM) was used to investigate the effect of parameters on the extraction in the UAE-PB system. At the temperature of 60 °C, extraction time of 105 min, and the solvent to plant ratio of 15.3, the maximum extraction yield of hypericin was achieved. In the optimal conditions, the amount of extraction was 0.112 mg hypericin/g dried plant, which was in accordance with the optimized predicted value (0.111 mg hypericin/g dried plant) from Design-Expert software.

Ultrasonic Treatment Increases Extraction Rate of Common Bean (Phaseolus vulgaris L.) Antioxidants

The feasibility of improving the extraction rate of common bean antioxidants by ultrasonic treatment was investigated. Scanning electron microscopy (SEM) and spectrum Fourier transform infrared spectrophotometer (FT-IR) analysis revealed that ultrasonic treatment substantially altered the cellular structure of common bean seed, resulting in increased surface area, eroded cell walls, and greater exposure of cellulose and hemicellulose. The highest antioxidant activity was obtained at optimal extraction conditions (68 min, 55% acetone, 36:1 liquid to solid ratio, 30 ℃, and 480 W) which were optimized by response surface methodology. In terms of the extraction rate of common bean antioxidants, ultrasound-assisted extraction (UAE) exhibits about seven-fold higher extraction efficiency than conventional solvent extraction (CSE). In addition, 10 phenolic compounds in the common bean extracts were detected and quantified by high performance liquid chromatography (HPLC), including protocatechuic acid, catechin, chlorogenic acid, epicatechin, ferulic acid, coumarin, rutin, myricetin, cinnamic acid, and genistein. In summary, ultrasonic treatment is an ideal candidate methodology for improving the extraction rate of common bean antioxidants.

Alternative Ultrasound-Assisted Method for the Extraction of the Bioactive Compounds Present in Myrtle (Myrtus communis L.)

The bioactive compounds in myrtle berries, such as phenolic compounds and anthocyanins, have shown a potentially positive effect on human health. Efficient extraction methods are to be used to obtain maximum amounts of such beneficial compounds from myrtle. For that reason, this study evaluates the effectiveness of a rapid ultrasound-assisted method (UAE) to extract anthocyanins and phenolic compounds from myrtle berries. The influence of solvent composition, as well as pH, temperature, ultrasound amplitude, cycle and solvent-sample ratio on the total phenolic compounds and anthocyanins content in the extracts obtained were evaluated. The response variables were optimized by means of a Box-Behnken design. It was found that the double interaction of the methanol composition and the cycle, the interaction between methanol composition and temperature, and the interaction between the cycle and solvent-sample ratio were the most influential variables on the extraction of total phenolic compounds (92.8% methanol in water, 0.2 s of cycle, 60 °C and 10:0.5 mL:g). The methanol composition and the interaction between methanol composition and pH were the most influential variables on the extraction of anthocyanins (74.1% methanol in water at pH 7). The methods that have been developed presented high repeatability and intermediate precision (RSD < 5%) and the bioactive compounds show a high recovery with short extraction times. Both methods were used to analyze the composition of the bioactive compounds in myrtle berries collected from different locations in the province of Cadiz (Spain). The results obtained by UAE were compared to those achieved in a previous study where microwave-assisted extraction (MAE) methods were employed. Similar extraction yields were obtained for phenolic compounds and anthocyanins by MAE and UAE under optimal conditions. However, UAE presents the advantage of using milder conditions for the extraction of anthocyanins from myrtle, which makes of this a more suitable method for the extraction of these degradable compounds.

Extraction, development and validation of HPLC-UV method for rapid and sensitive determination of colchicine from Colchicum autumnale L. Bulbs

Colchicum autumnale L. also known as the autumn crocus, contains colchicine alkaloid having antifungal properties. The tuber of this plant is rich in terms of colchicine. In this research an ultrasound-assisted extraction (UAE) method was optimized for the extraction of colchicine from Colchicum autumnale L. bulbs before high-performance liquid chromatography with UV detection (HPLC-UV). Optimization of various extraction parameters was performed using response surface methodology (RSM) to evaluate the maximum colchicine yield from Colchicum autumnale L. bulbs. The Box-Behnken design (BBD) and RSM were used to investigate the effect of three key parameters (extraction time (20–60 min), extraction temperature (40–80 °C) and ultrasound power (500–700 W) on extraction efficiency. The variance analysis suggested that the dependent response variable of yield of colchicine may be expressed by a quadratic polynomial model. The optimal theoretical extraction conditions were found to be an ultrasonication power of 602.4 W, an extraction time of 42 min and a temperature of 64 °C. Under these conditions, the optimum foreseen yield was 0.237%. The experimental colchicine yield obtained by following the optimized conditions was found to be 0.238%. These values are very well compatible with each other.

Optimization of Ultrasound-Assisted Extraction of Flavonoids from Olive (Olea europaea) Leaves, and Evaluation of Their Antioxidant and Anticancer Activities

Olea europaea leaves are the major byproduct of olive farming. In this study, ultrasound-assisted extraction of flavonoids from olive leaves was optimized using response surface methodology, and the flavonoid compounds and their antioxidant and anticancer activities were investigated by high performance liquid chromatography. The results showed that the optimized conditions for achieving the maximum yield of flavonoids (74.95 mg RE/g dm) were 50 °C temperature, 270 W power, 50 min time, and 41 mL/g liquid-solid ratio. There was a significant difference in the total flavonoid content between the aged and young leaves harvested in April and July, and six main components were quantified. Among them, luteolin-4’-O-glucoside was the most predominant flavonoid compound, followed by apigenin-7-O-glucoside and rutin. Olive leaves also contained small amounts of luteolin, apigenin, and quercetin. Additionally, excellent antioxidant activity was exhibited when tested with the DPPH assay; superoxide radical-scavenging ability and reducing power was also tested. The anticancer activity of the flavonoids was assessed using HeLa cervical cancer cells, and it was observed that increasing concentrations of olive leaf flavonoids resulted in decreased cancer cell viability. These results suggest that the flavonoids from olive leaves could be used as a potential source of natural antioxidants for the pharmaceutical and food industries.

Discoursing on Soxhlet extraction of ginseng using association analysis and scanning electron microscopy

Soxhlet extraction is a common method of sample preparation. However, there has been no discussion about the efficiency of Soxhlet extraction from different batches and the factors that cause content fluctuation. In this study, Panax ginseng was selected as a model sample. Soxhlet extraction by means of a water bath, which has always been neglected, was identified as a novel key factor in the poor repeatability in different batches of Soxhlet extraction, as it can affect the siphon times and reflux time, which have been positively correlated with the ginsenoside contents. By substituting round bottom flasks in the same column, the relative standard deviation of the most fluctuated compound, ginsenoside Rb₁, was decreased from 24.6% to 5.02%. Scanning electron microscopy analysis confirmed that the breakdown of the surface of the ginseng powder in the Soxhlet extraction led to a better dissolution of ginsenosides, indicating that chloroform may promote the extraction of ginsenosides by disrupting the cell structure. Moreover, 70% methanol was regarded as the better solvent for extracting the ginsenosides. Overall, this work offers a practical and effective protocol for improving the accuracy and repeatability of Soxhlet extraction methodology for ginsenosides and other analytes.

Green Extraction of Natural Antioxidants from the Sterculia nobilis Fruit Waste and Analysis of Phenolic Profile

The waste of Sterculia nobilis fruit was massively produced during food processing, which contains lots of natural antioxidants. In this study, antioxidants in the Sterculia nobilis fruit waste were extracted using the green microwave-assisted extraction (MAE) technique. The effects of five independent variables (ethanol concentration, solvent/material ratio, extraction time, temperature, and microwave power) on extraction efficiency were explored, and three major factors (ethanol concentration, extraction time, and temperature) showing great influences were chosen to study their interactions by response surface methodology. The optimal conditions were as follows: 40.96% ethanol concentration, 30 mL/g solvent/material ratio, 37.37 min extraction time at 66.76 °C, and 700 W microwave power. The Trolox equivalent antioxidant capacity value obtained in optimal conditions was in agreement with the predicted value. Besides, MAE improved the extraction efficiency compared with maceration and Soxhlet extraction methods. Additionally, the phenolic profile in the extract was analyzed by UPLC-MS/MS, and eight kinds of phenolic compounds were identified and quantified, including epicatechin, protocatechuic acid, ferulic acid, gallic acid, p-coumaric acid, caffeic acid, quercetin, and p-hydroxycinnamic acid. This study could contribute to the value-added utilization of the waste from Sterculia nobilis fruit, and the extract could be developed as food additive or functional food.

Impact of Ohmic-Assisted Decoction on Bioactive Components Extracted from Yacon (Smallanthus sonchifolius Poepp.) Leaves: Comparison with Conventional Decoction

Yacon (Smallanthus sonchifolius Poepp.) leaves are a potentially rich source of bioactive compounds, such as phenolic acids and flavonoids. In this study, the effect of the extraction method (ohmic-assisted decoction (OH-DE) and decoction (DE)), yacon cultivar (red and white), and leaf age (young and old) on the quality/quantity of extracted phytochemicals were investigated. Extraction yield, energy consumption, total phenolic content (TPC), total flavonoid content (TFC), ABTS and DPPH radical scavenging activity, and ferric reducing antioxidant power (FRAP) were determined. Additionally, HPLC-DAD was used to identify the major individual phenolic and flavonoid compounds of yacon leaves. The results showed that a three-way interaction of process-variables (extraction method×yacon cultivar×age of leaves) influenced the extraction yield, TPC, TFC, ABTS, and DPPH radical scavenging activity, and FRAP, significantly (p < 0.05). However, energy consumption of the extraction process was only affected by method of extraction (p < 0.05) and was halved when OH-DE was applied as compared to DE alone. Additionally, the phytochemical quality of extracts was either improved or comparable when OH-DE was used for extraction. Also, it was shown that yacon leaves contained considerable amounts of caffeic acid, chlorogenic acid, ferrulic acid, myricetin, p-coumaric acid, and rutin, while leaves of the red cultivar had higher contents of each compound compared to leaves of the white cultivar.

Microwave-Assisted Extraction of Natural Antioxidants from the Exotic Gordonia axillaris Fruit: Optimization and Identification of Phenolic Compounds

Our previous study reported that the fruit of Gordonia axillaris , an edible wild fruit, possessed strong antioxidant activity. In this study, a microwave-assisted extraction (MAE) method was established to extract antioxidants from the fruit of Gordonia axillaris . The influence of five parameters, including ethanol concentration, solvent/material ratio, extraction time, extraction temperature and microwave power, was investigated by single-factor experiments. Three factors, namely ethanol concentration, solvent/material ratio, extraction time, were found to exert a major influence on extraction efficacy, and were further studied by response surface methodology to investigate their interactions. Ethanol concentration of 36.89%, solvent/material ratio of 29.56 mL/g, extraction time of 71.04 min, temperature of 40 °C, and microwave power of 400 W were found to be the optimal condition. The TEAC value was 198.16 ± 5.47 µmol Trolox/g DW under the optimal conditions, which was in conformity to the predicted value (200.28 µmol Trolox/g DW). In addition, the MAE method was compared with two conventional methods (Soxhlet extraction and maceration extraction). Results showed that the antioxidant capacity of the extract obtained by MAE method was stronger than that obtained by maceration (168.67 ± 3.88 µmol Trolox/g DW) or Soxhlet extraction (114.09 ± 2.01 µmol Trolox/g DW). Finally, several phenolic compounds in the extract were identified and quantified by UPLC-MS/MS, which were rutin, gallic acid, protocatechuic acid, epicatechin, epicatechin gallate, 2-hydrocinnamic acid, p -coumaric acid, quercetin, chlorogenic acid and ferulic acid.

Ultrasonic Assisted-Reflux Synergistic Extraction of Camptothecin and Betulinic Acid from Camptotheca acuminata Decne. Fruits

A novel and efficient ultrasonic assisted-reflux synergistic extraction (UARSE) method for extracting camptothecin (CPT) and betulinic acid (BA) from Camptotheca acuminata Decne. fruits has been developed in this study. The advantages of the ultrasonic and reflux extraction methods have been combined in the UARSE method and used to extract CPT and BA for the first time. The parameters influencing the efficiency of UARSE were optimized using the Box-Behnken design (BBD) to obtain the maximum extraction yield of CPT and BA. The optimal extraction conditions were as follows: 225 W for the ultrasonic power; 24 min for the extraction time; and 32 mL/g for the liquid–solid ratio. The extraction yields obtained by UARSE were 2.386 ± 0.112 mg/g for CPT and 17.192 ± 0.808 mg/g for BA, which were 1.43-fold and 1.33-fold, respectively, higher than by using heating reflux extraction (HRE) and ultrasonic-assisted extraction (UAE). In addition, the 24-min extraction time using UARSE was 80% and 60% less than those provided by HRE and UAE, respectively. Therefore, UARSE can be considered a rapid and efficient method for extracting CPT and BA from the fruits of C. acuminata Decne.