N-Confused Porphyrin Immobilized on Solid Supports: Synthesis and Metal Ions Sensing Efficacy

2,5-Thienylene-Strapped [26]Hexaphyrin as Multifunctional Chemosensor for Hg2+, Cu2+, and F- Ions

The sensing behavior of 2,5-thienylene-bridged tetrakis(2,6-dichlorophenyl)-[26]hexaphyrin (2) towards various metal ions and anions were investigated by UV-vis and fluorescence spectroscopies. Using this strapped hexaphyrin (2), the molecular sensor displayed highly selective and sensitive colorimetric responses to Cu2+ and Hg2+ in MeOH/THF. The spectral changes are distinctive enough in the visible region of the spectrum to enable naked-eye detection. The detection limits of Cu2+ and Hg2+ using this chemo-sensor in a mixed MeOH/THF solution were 1.978 and 1.283 μM, respectively, and 1.052 μM for F- in dichloromethane. Chemosensor 2,5-thienylene strapped [26]hexaphyrin (2) shows absorption responses both a 1 : 1 molecular ratio for 2 interacting with Cu2+ and Hg2+ and a 1 : 2 ratio between 2 and F- ions.

Water-soluble anionic N-confused porphyrin for sensitive and selective detection of heavy metal pollutants in aqueous environment

Efficient detection and quantification of metal ions in real time and in a cost-effective manner is a critical step in combating the increasing danger of heavy metal contamination of our biosphere. The potential of water-soluble anionic derivative of N-confused tetraphenylporphyrin (WS-NCTPP) has been investigated for quantitative detection of heavy metal ions. The results show that the photophysical properties of WS-NCTPP differ significantly in the presence of four metal ions, namely Hg(II), Zn(II), Co(II) and Cu(II). The variation in the spectral behaviour is driven by the formation of 1:1 complexes with all the four cations with varied degree of complexation. The selectivity of the sensing is studied through interference studies, indicating maximum selectivity for Hg(II) cations. Computational studies of the structural features of the metal complexes with WS-NCTPP help in establishing the geometry and binding interactions between the metal ions and the porphyrin nucleus. The results demonstrate the promising potential of the NCTPP probe which should be utilized for detection of heavy metal ions, especially mercury, in the near future.

Metal Complexes of Porphyrinoids Containing Nonpyrrolic Heterocycles

The replacement of one or more pyrrolic building block(s) of a porphyrin by a nonpyrrolic heterocycle leads to the formation of so-called pyrrole-modified porphyrins (PMPs), porphyrinoids of broad structural variability. The wide range of coordination environments (type, number, charge, and architecture of the donor atoms) that the pyrrole-modified frameworks provide to the central metal ions, the frequent presence of donor atoms at their periphery, and their often observed nonplanarity or conformational flexibility distinguish the complexes of the PMPs clearly from those of the traditional square-planar, dianionic, N₄-coordinating (hydro)porphyrins. Their different coordination properties suggest their utilization in areas beyond which regular metalloporphyrins are suitable. Following a general introduction to the synthetic methodologies available to generate pyrrole-modified porphyrins, their general structure, history, coordination chemistry, and optical properties, this Review highlights the chemical, electronic (optical), and structural differences of specific classes of metalloporphyrinoids containing nonpyrrolic heterocycles. The focus is on macrocycles with similar "tetrapyrrolic" architectures as porphyrins, thusly excluding the majority of expanded porphyrins. We highlight the relevance and application of these metal complexes in biological and technical fields as chemosensors, catalysts, photochemotherapeutics, or imaging agents. This Review provides an introduction to the field of metallo-PMPs as well as a comprehensive snapshot of the current state of the art of their synthesis, structures, and properties. It also aims to provide encouragement for the further study of these intriguing and structurally versatile metalloporphyrinoids.

Polyoxometalate Functionalized Sensors: A Review

Polyoxometalates (POMs) are a class of metal oxide complexes with a large structural diversity. Effective control of the final chemical and physical properties of POMs could be provided by fine-tuning chemical modifications, such as the inclusion of other metals or non-metal ions. In addition, the nature and type of the counterion can also impact POM properties, like solubility. Besides, POMs may combine with carbon materials as graphene oxide, reduced graphene oxide or carbon nanotubes to enhance electronic conductivity, with noble metal nanoparticles to increase catalytic and functional sites, be introduced into metal-organic frameworks to increase surface area and expose more active sites, and embedded into conducting polymers. The possibility to design POMs to match properties adequate for specific sensing applications turns them into highly desirable chemicals for sensor sensitive layers. This review intends to provide an overview of POM structures used in sensors (electrochemical, optical, and piezoelectric), highlighting their main functional features. Furthermore, this review aims to summarize the reported applications of POMs in sensors for detecting and determining analytes in different matrices, many of them with biochemical and clinical relevance, along with analytical figures of merit and main virtues and problems of such devices. Special emphasis is given to the stability of POMs sensitive layers, detection limits, selectivity, the pH working range and throughput.

Creation from Confusion and Fusion in the Porphyrin World─The Last Three Decades of N-Confused Porphyrinoid Chemistry

Confusion is a novel concept of isomerism in porphyrin chemistry, delivering a steady stream of new chemistry since the discovery of N-confused porphyrin, a porphyrin mutant, in 1994. These days, the number of confused porphyrinoids is increasing, and confusion and associated fusion are found in various fields such as supramolecular chemistry, materials chemistry, biological chemistry, and catalysts. In this review, the birth and growth of confused porphyrinoids in the last three decades are described.

Tetracationic porphyrin derivatives against human breast cancer

Photodynamic therapy (PDT) is an approved therapeutic approach and an alternative to conventional chemotherapy for the treatment of several types of cancer with the advantages of reducing the side effects and developing resistance mechanisms. Here, was evaluated the photosensitization capabilities of 5,10,15,20-tetrakis[4-(pyridinium-1-yl-methyl)phenyl]porphyrin (3), its N-confused isomer (4) and of the neutral precursors (1) and (2) and the results were compared with the ones obtained with the cationic 5,10,15,20-tetrakis(1-methylpyridinium-4-yl)porphyrin (TMPyP). Both regular porphyrin derivatives 1 and 3 showed higher efficiency to generate singlet oxygen than TMPyP. The PDT assays towards MCF-7 cells under red light irradiation (λ > 640 nm, 23.7 mW cm^-2) demonstrated that the cationic porphyrin 3 is an efficient photosensitizer to kill MCF-7 breast cancer cells. The study of the cell death mechanisms induced by the photodynamic process showed that the studied porphyrin 3 and TMPyP caused cell death by autophagic flux and necrosis.

Nucleophilic Aromatic Substitution (SNAr) and Related Reactions of Porphyrinoids: Mechanistic and Regiochemical Aspects

The nucleophilic substitution of aromatic moieties (SNAr) has been known for over 150 years and found wide use for the functionalization of (hetero)aromatic systems. Currently, several "types" of SNAr reactions have been established and notably the area of porphyrinoid macrocycles has seen many uses thereof. Herein, we detail the SNAr reactions of seven types of porphyrinoids with differing number and type of pyrrole units: subporphyrins, norcorroles, corroles, porphyrins, azuliporphyrins, N-confused porphyrins, and phthalocyanines. For each we analyze the substitution dependent upon: a) the type of nucleophile and b) the site of substitution (α, β, or meso). Along with this we evaluate this route as a synthetic strategy for the generation of unsymmetrical porphyrinoids. Distinct trends can be identified for each type of porphyrinoid discussed, regardless of nucleophile. The use of nucleophilic substitution on porphyrinoids is found to often be a cost-effective procedure with the ability to yield complex substituent patterns, which can be conducted in non-anhydrous solvents with easily accessible simple porphyrinoids.

Acidochromic Behavior of Dibenzylidene Cyclohexanone-Based Bischalcone: Experimental and Theoretical Study

Synthesis and characterization of substituted 2,6-dibenzylidene cyclohexanone-based bischalcone derivatives and their optimized geometries were investigated by density functional theory. The synthesized compounds were identified through ultraviolet-visible, Fourier transform infrared, and ¹H nuclear magnetic resonance spectroscopies and elemental analysis. Significant acidochromic behavior was observed for 2,6-bis(4-dimethylamino-benzylidene)-cyclohexanone 1e. This result is owing to the preferential protonation of the chromophoric N,N-dimethylamino group, that is, quaternary salt formation and deactivation of the resonance system. The result was consistent with computational studies where the protonation was favored by 211 kcal/mol in the gas phase. The compounds also showed solvatochromic behavior. The geometries of the synthesized compounds were optimized with B3LYP/6-311G+(d,p) and APFD/6-311+G(d,p) basis sets. The single point energy indicated that APFD/6-311+G(d,p) basis set gave the lowest energy of 445-655 kcal/mol for the studied bischalcone derivatives. Quantum chemical parameters were also calculated.

Photodegradation of microcystin-LR by pyridyl iron porphyrin immobilized on NaY zeolite

A novel photocatalyst, FeTPyPY, was prepared by immobilizing water-soluble tetra(4-pyridyl)phenyl iron-porphyrin (FeTPyP) on NaY zeolite to degrade microcystin-LR (MC-LR), one of the most toxic microcystins (MCs). UV-Vis analysis, UV-Vis diffuse reflectance spectroscopy, infrared spectroscopy, cyclic voltammetry and transmission electron microscopy were employed to characterize immobilized FeTPyPY. Under visible light (λ ≥ 420 nm), MC-LR was degraded utilizing immobilized FeTPyPY by activating molecular oxygen. The results showed that 85% of MC-LR was efficiently degraded by FeTPyPY with loading amount 100:1 (m_NaY:m_FeTPyP) after 300 min of visible light illumination. Moreover, FeTPyPY was stable in the degradation system with pH 7.0. The degradation mechanism was evaluated using electron spin resonance, and the results demonstrated that highly reactive oxygen species (^•OH radical) were generated in the system to degrade MC-LR. Therefore, immobilized FeTPyPY was available to break down the toxic groups within MC-LR by utilizing environmental ^•OH radical under circumneutral condition.

Unsymmetrical nonplanar 'push-pull' β-octasubstituted porphyrins: facile synthesis, structural, photophysical and electrochemical redox properties

Mixed substitution at the β-position of porphyrins influences their photophysical and electrochemical redox properties. Two new series of asymmetrically mixed β-octasubstituted porphyrins viz. MTPP(Ph)2Br5X (X = NO2 or Br and M = 2H, Co(ii), Ni(ii), Cu(ii), and Zn(ii)) have been synthesized and characterized by various spectroscopic techniques. The single crystal X-ray structure of H2TPP(NO2)(Ph)2Br5 showed a nonplanar saddle shape conformation of the macrocyclic core. Furthermore, the fully optimized geometries confirmed the saddle shape conformation of H2TPP(Ph)2Br5X (X = NO2 or Br). Electronic spectra revealed a significant bathochromic shift by appending both electron donor and acceptor substituents at the β-position of the meso-tetraphenylporphyrin skeleton, which reflects the following order H2TPP < H2TPP(NO2) < H2TPP(NO2)(Ph)2 < H2TPP(Ph)2Br6 < H2TPP(NO2)(Ph)2Br5. H2TPP(Ph)2Br5X (X = NO2 or Br) exhibited a significant bathochromic shift (Δλmax = 53-61 nm) in the Soret band and (Δλmax = 90-95 nm) in the longest wavelength Qx(0,0) band as compared to H2TPP. Nonplanar conformations and electron withdrawing β-substituents induce higher protonation and deprotonation constants for H2TPP(NO2)(Ph)2Br5 and H2TPP(Ph)2Br6 as compared to precursor porphyrins viz. H2TPP, H2TPP(NO2) and H2TPP(NO2)(Ph)2. The electronic spectral properties and redox potentials of MTPP(Ph)2Br5X (X = NO2 or Br and M = 2H, Co, Ni, Cu and Zn) are affected by β-substituents at the periphery of the porphyrin core. Redox tunability was achieved by appending push-pull substituents at the β-position of the MTPP (M = 2H, CoII, NiII, CuII, and ZnII) skeleton of the macrocycle. CuTPP(Ph)2Br6 and CuTPP(NO2)(Ph)2Br5 exhibited a dramatically reduced HOMO-LUMO gap with a difference of 0.55 V and 0.62 V, respectively as compared to CuTPP due to the push-pull effect of β-substituents and nonplanarity of the porphyrin core.

Design of Multifunctional Fluorescent Hybrid Materials Based on SiO2 Materials and Core-Shell Fe3 O4 @SiO2 Nanoparticles for Metal Ion Sensing

Hybrid fluorescent materials constructed from organic chelating fluorescent probes and inorganic solid supports by covalent interactions are a special type of hybrid sensing platform that has gained much interest in the context of metal ion sensing applications owing to their excellent advantages, recyclability, and solubility/dispersibility in particular, as compared with single organic fluorescent molecules. In recent decades, SiO₂ materials and core-shell Fe₃ O₄ @SiO₂ nanoparticles have become important inorganic solid materials and have been used as inorganic solid supports to hybridize with organic fluorescent receptors, resulting in multifunctional fluorescent hybrid systems for potential applications in sensing and related research fields. Therefore, recent progress in various fluorescent-group-functionalized SiO₂ materials is reviewed, with a focus on mesoporous silica nanoparticles and core-shell Fe₃ O₄ @SiO₂ nanoparticles, as interesting fluorescent organic-inorganic hybrid materials for sensing applications toward essential and toxic metal ions. Selective examples of other types of silica/silicon materials, such as periodic mesoporous organosilicas, solid SiO₂ nanoparticles, fibrous silica spheres, silica nanowires, silica nanotubes, and silica hollow microspheres, are also mentioned. Finally, relevant perspectives of metal-ion-sensing-oriented silica-fluorescent probe hybrid materials are provided.

Supramolecular Hybrid Material Based on Engineering Porphyrin Hosts for an Efficient Elimination of Lead(II) from Aquatic Medium

Porphyrins show great promise for future purification demands. This is largely due to their unique features as host binding molecules that can be modified at the synthetic level, and largely improved by their incorporation into inorganic based materials. In this study, we assessed the efficacy of a hybrid material obtained from the immobilization of 5,10,15,20-tetrakis(pentafluorophenyl)-porphyrin on silica surface to remove Pb(II), Cu(II), Cd(II), and Zn(II) ions from water. The new organic-inorganic hybrid adsorbent was fully characterized by adequate techniques and the results show that the hybrid exhibits good chemical and thermal stability. From batch assays, it was evaluated how the efficacy of the hybrid was affected by the pH, contact time, initial metal concentration, and temperature. The adsorption kinetic and isotherms showed to fit the recent developed fractal-like pseudo-second-order model and Langmuir–Freundlich model respectively. The highest adsorption capacities for Pb(II), Cu(II), Cd(II), and Zn(II) ions were 187.36, 125.17, 82.45, and 56.23 mg g⁻¹, respectively, at pH 6.0 and 25 °C. This study also shows that metal cations from real river water samples can be efficient removed in the presence of the new adsorbent material.

Bioinspired-Metalloporphyrin Magnetic Nanocomposite as a Reusable Catalyst for Synthesis of Diastereomeric (-)-Isopulegol Epoxide: Anticancer Activity Against Human Osteosarcoma Cells (MG-63)

In the present study, we developed a green epoxidation approach for the synthesis of the diastereomers of (−)-isopulegol benzyl ether epoxide using molecular oxygen as the oxidant and a hybrid manganese(III)-porphyrin magnetic reusable nanocomposite as the catalyst. High activity, selectivity, and stability were obtained, with up to four recycling cycles without the loss of activity and selectivity for epoxide. The anticancer effect of the newly synthesized isopulegol epoxide diastereomers was evaluated on a human osteosarcoma cell line (MG-63); both diastereomers showed similar in vitro potency. The measured IC₅₀ values were significantly lower than those reported for other monoterpene analogues, rendering these epoxide isomers as promising anti-tumor agents against low prognosis osteosarcoma.