New Trends in Biopolymer-Based Membranes for Pervaporation

Recent advancements in polyurethane-based membranes for gas separation

Gas separation membranes are critical in a variety of environmental research and industrial applications. These membranes are designed to selectively allow some gases to flow while blocking others, allowing for the separation and purification of gases for a variety of applications. Therefore, the demand for fast and energy-efficient gas separation techniques is of central interest for many chemical and energy production diligences due to the intensified levels of greenhouse and industrial gases. This encourages the researchers to innovate techniques for capturing and separating these gases, including membrane separation techniques. Polymeric membranes play a significant role in gas separations by capturing gases from the fuel combustion process, purifying chemical raw material used for plastic production, and isolating pure and noncombustible gases. Polyurethane-based membrane technology offers an excellent knack for gas separation applications and has also been considered more energy-efficient than conventional phase change separation methodologies. This review article reveals a thorough delineation of the current developments and efforts made for PU membranes. It further explains its uses for the separation of valuable gases such as carbon dioxide (CO2), hydrogen (H2), nitrogen (N2), methane (CH4), or a mixture of gases from a variety of gas spillages. Polyurethane (PU) is an excellent choice of material and a leading candidate for producing gas-separating membranes because of its outstanding chemical chemistry, good mechanical abilities, higher permeability, and variable microstructure. The presence of PU improves several characteristics of gas-separating membranes. Selectivity and separation efficiency of PU-centered membranes are enhanced through modifications such as blending with other polymers, use of nanoparticles (silica, metal oxides, alumina, zeolite), and interpenetrating polymer networks (IPNs) formation. This manuscript critically analyzes the various gas transport methods and selection criteria for the fabrication of PU membranes. It also covers the challenges facing the development of PU-membrane-based separation procedures.

New generation mixed matrix membrane for CO2 separation: Transition from binary to quaternary mixed matrix membrane

Contemporary advances in material development associated with membrane gas separation refer to the cost-effective fabrication of high-performance, defect-free mixed matrix membranes (MMMs). For clean energy production, natural gas purification, and CO2 capture from flue gas systems, constituting a functional integration of polymer matrix and inorganic filler materials find huge applications. The broad domain of research and development of MMMs focused on the selection of appropriate materials, inexpensive membrane fabrication, and comparative study with other gas separation membranes for real-world applications. This study addressed a comprehensive review of the advanced MMMs wrapping various facets of membrane material selection; polymer and filler particle morphology and compatibility between the phases and the relevance of several fillers in the assembly of MMMs are analyzed. Further, the research on binary MMMs, their problems, and solutions to overcome these challenges have also been discussed. Finally, the future directions and scope of work on quaternary MMM are scrutinized in the article.

The strategic applications of natural polymer nanocomposites in food packaging and agriculture: Chances, challenges, and consumers' perception

Natural polymer-based nanocomposites have received significant attention in both scientific and industrial research in recent years. They can help to eliminate the consequences of application of petroleum-derived polymeric materials and related environmental concerns. Such nanocomposites consist of natural biopolymers (e.g., chitosan, starch, cellulose, alginate and many more) derived from plants, microbes and animals that are abundantly available in nature, biodegradable and thus eco-friendly, and can be used for developing nanocomposites for agriculture and food industry applications. Biopolymer-based nanocomposites can act as slow-release nanocarriers for delivering agrochemicals (fertilizers/nutrients) or pesticides to crop plants to increase yields. Similarly, biopolymer-based nanofilms or hydrogels may be used as direct product coating to extend product shelf life or improve seed germination or protection from pathogens and pests. Biopolymers have huge potential in food-packaging. However, their packaging properties, such as mechanical strength or gas, water or microbial barriers can be remarkably improved when combined with nanofillers such as nanoparticles. This article provides an overview of the strategic applications of natural polymer nanocomposites in food and agriculture as nanocarriers of active compounds, polymer-based hydrogels, nanocoatings and nanofilms. However, the risk, challenges, chances, and consumers' perceptions of nanotechnology applications in agriculture and food production and packaging have been also discussed.

Characterization of Caseinate–Carboxymethyl Chitosan-Based Edible Films Formulated with and without Transglutaminase Enzyme

Edible composite packaging has the advantage of complementary functional properties over its individual bio-components. However, film composites made from caseinate (CA) and carboxymethyl chitosan (CMCH) have not yet been well explored. In this study, four types of CA-CMCH composite films were prepared and evaluated with and without transglutaminase (TGase) supplement. Aqueous CA (8%, w/v) and CMCH solutions (2%, w/v) were mixed in different volume ratios of CA: CMCH as 100:0, 75:25, 50:50, 75:25, and 25:75. Those to be supplemented with TGase were incorporated at 10 U/g of caseinate protein level. Results revealed that CMCH incorporation to CA facilitated a smooth and uniform surface microstructure on films and markedly improved the transparency, water barrier properties, mechanical properties, and solubility of the composite film. Furthermore, addition of TGase resulted in an improvement in the water vapor permeability. TGase successfully enforced the formation of CA-CMCH composites with some enhanced functional properties. The resulting composite film offers potential for applications as an alternative edible film or in the preparation of edible packaging films.

Polyphenol modified natural collagen fibrous network towards sustainable and antibacterial microfiltration membrane for efficient water disinfection

Because of their low-cost and high bacterial interception efficiency, large-scale membrane separation technologies like microfiltration (MF) have been widely implemented for water disinfection. However, lack of antibacterial ability and low sustainability are two major drawbacks of most petroleum-based MF membranes, which are normally associated with hazardous issues including biofouling and nonbiodegradable waste. In this work, abundant animal hides, which are by-products of the meat processing industry, were proposed as raw materials to fabricate a sustainable MF membrane due to their natural, hierarchical, and renewable collagen fibrous network (CFN) with inherent biodegradability. After the removal of non-collagen compositions from animal hides, such as hair and fat, through a facile pretreating process base on green chemistry principles, a thin CFN based membrane (CFN-M) with a similar micropore size to that of commercial MF membranes could be produced. Furthermore, inspired by conventional leather tanning technology, tannic acids (TA) were selected as plant polyphenol tanning agent to modify collagen fibers based on tanning chemistry to improve the thermal stability of CFN-M. Moreover, the TA cross-linked CFN-M (TA@CFN-M) exhibited excellent antibacterial properties due to the production of reactive oxygen species (ROS) by the catechol functional group. The resulting TA@CFN-M achieved >99.9% water disinfection efficiency with a flux of ∼150 L m^-2 h^-1 via gravity-driven operation, while simultaneously showing admirable anti-biofouling ability. Different from the commercial MF membrane, based on the green chemistry principle, this work may shed light on designing new sustainable and antibacterial membranes for anti-biofouling water disinfection.

Novel Thin Film Nanocomposite Membranes Based on Chitosan Succinate Modified with Fe-BTC for Enhanced Pervaporation Dehydration of Isopropanol

The application of environmentally friendly and energy-efficient membrane processes allows improvement the ecological safety and sustainability of industrial production. However, the effective application of membrane processes requires novel high-performance thin film composite (TFC) membranes based on biopolymers to solve environmental problems. In this work for the first time novel thin film nanocomposite (TFN) membranes based on biopolymer chitosan succinate (ChS) modified with the metal organic framework iron 1,3,5-benzenetricarboxylate (Fe-BTC) were developed for enhanced pervaporation dehydration. The formation of a selective layer of TFN membranes on the porous membrane-support was carried out by two methods—dynamic technique and physical adsorption. The effect of the membrane formation method and Fe-BTC content in ChS layer on the structure and physicochemical properties of TFN membranes was investigated. The developed TFN ChS-based membranes were evaluated in the pervaporation dehydration of isopropanol (12–30 wt.% water). It was found that TFN ChS-Fe-BTC membranes prepared by two methods demonstrated improved permeation flux compared to the reference TFC ChS membrane. The best transport properties in pervaporation dehydration of isopropanol (12–30 wt.% water) were possessed by TFN membranes with 40 wt.% Fe-BTC prepared by dynamic technique (permeation flux 99–499 g m−2 h−1 and 99.99% water in permeate) and TFN membranes with 5 wt.% Fe-BTC developed by physical adsorption (permeation flux 180–701 g m−2 h−1 and 99.99% water in permeate).

Biopolymer-Based Mixed Matrix Membranes (MMMs) for CO2/CH4 Separation: Experimental and Modeling Evaluation

Alternative materials are needed to tackle the sustainability of membrane fabrication in light of the circular economy, so that membrane technology keeps playing a role as sustainable technology in CO2 separation processes. In this work, chitosan (CS)-based mixed matrix thin layers have been coated onto commercial polyethersulfone (PES) supports. The CS matrix was loaded by non-toxic 1-Ethyl-3-methylimidazolium acetate ionic liquid (IL) and/or laminar nanoporous AM-4 and UZAR-S3 silicates prepared without costly organic surfactants to improve CO2 permselectivity and mechanical robustness. The CO2/CH4 separation behavior of these membranes was evaluated experimentally at different feed gas composition (CO2/CH4 feed mixture from 20:80 to 70:30%), covering different separation applications associated with this separation. A cross-flow membrane cell model built using Aspen Custom Modeler was used to validate the process performance and relate the membrane properties with the target objectives of CO2 and CH4 recovery and purity in the permeate and retentate streams, respectively. The purely organic IL-CS and mixed matrix AM-4:IL-CS composite membranes showed the most promising results in terms of CO2 and CH4 purity and recovery. This is correlated with their higher hydrophilicity and CO2 adsorption and lower swelling degree, i.e., mechanical robustness, than UZAR-S3 loaded composite membranes. The purity and recovery of the 10 wt.% AM-4:IL-CS/PES composite membrane were close or even surpassed those of the hydrophobic commercial membrane used as reference. This work provides scope for membranes fabricated from renewable or biodegradable polymers and non-toxic fillers that show at least comparable CO2/CH4 separation as existing membranes, as well as the simultaneous feedback on membrane development by the simultaneous correlation of the process requirements with the membrane properties to achieve those process targets.

Multi-Bit Biomemristic Behavior for Neutral Polysaccharide Dextran Blended with Chitosan

Natural biomaterials applicable for biomemristors have drawn prominent attention and are of benefit to sustainability, biodegradability, biocompatibility, and metabolism. In this work, multi-bit biomemristors based on the neutral polysaccharide dextran were built using the spin-casting method, which was also employed to explore the effect of dextran on the ternary biomemristic behaviors of dextran–chitosan nanocomposites. The doping of 50 wt% dextran onto the bio-nanocomposite optimized the ratio of biomemristance in high-, intermediate-, and low-resistance states (10⁵:10⁴:1). The interaction between dextran and chitosan (hydrogen-bond network) was verified by Fourier transform infrared (FTIR) and Raman spectroscopy analysis; through this interaction, protons derived from the self-dissociation of water may migrate under the electric field, and so proton conduction may be the reason for the ternary biomemristic behaviors. Observations from X-ray diffraction (XRD), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) analysis displayed that the 50 wt% dextran/50 wt% chitosan nanocomposite had the greatest amorphous ratio as well as the highest decomposition and peak transition temperatures in comparison with the other three dextran–chitosan nanocomposites. This work lays the foundation for neutral biomaterials applied to green ultra-high-density data-storage systems.

Application of polysaccharide-based metal organic framework membranes in separation science

Polysaccharide/MOF composite membranes have captured the interests of many researchers during decontamination of polluted environments. Their popularity can be attributed to the relatively high chemical and thermal stabilities of these composite membranes. Chitosan is among the polysaccharides extensively used during the synthesis of hybrid membranes with MOFs. The applications of chitosan/MOF composite membranes in separation science are explored in detail in this paper. Researchers have also synthesised mixed matrix membranes of MOFs with cellulose and cyclodextrin that have proved to be effective during separation of a variety of materials. The uses of cellulose/MOF and cyclodextrin/MOF membranes for the removal of environmental pollutants are discussed in this review. In addition, the challenges associated with the use of these mixed matrix membranes are explored in this current paper.

Chitin and derivative chitosan-based structures - Preparation strategies aided by deep eutectic solvents: A review

The high molecular weight of chitin, as a biopolymer, challenges its extraction due to its insolubility in the solvents. Also, chitosan, as the N-deacetylated form of chitin, can be employed as a primary material for different industries. The low mechanical stability and poor plasticity of chitosan films, as a result of incompatible interaction between chitosan and the used solvent, have limited its industrialization. Deep eutectic solvents (DESs), as novel solvents, can solve the extraction difficulties of chitin, and the low mechanical stability and weak plasticity of chitosan films. Also, DESs can be considered for the different chitosan and chitin productions, including chitin nanocrystal and nanofiber, N,N,N-trimethyl-chitosan, chitosan-based imprinted structures, and DES-chitosan-based beads and monoliths. This review aims to focus on the preparation and characterization (chemistry and morphology) of DES-chitin-based and DES-chitosan-based structures to understand the influence of the incorporation of DESs into the chitin and chitosan structure.

Biobased composites from agro-industrial wastes and by-products

The greater awareness of non-renewable natural resources preservation needs has led to the development of more ecological high-performance polymeric materials with new functionalities. In this regard, biobased composites are considered interesting options, especially those obtained from agro-industrial wastes and by-products. These are low-cost raw materials derived from renewable sources, which are mostly biodegradable and would otherwise typically be discarded. In this review, recent and innovative academic studies on composites obtained from biopolymers, natural fillers and active agents, as well as green-synthesized nanoparticles are presented. An in-depth discussion of biobased composites structures, properties, manufacture, and life-cycle assessment (LCA) is provided along with a wide up-to-date overview of the most recent works in the field with appropriate references. Potential uses of biobased composites from agri-food residues such as active and intelligent food packaging, agricultural inputs, tissue engineering, among others are described, considering that the specific characteristics of these materials should match the proposed application.

Facile fabrication and nanoscale assembly of polydopamine-functionalized, flexible chitosan films

Substrates that are simultaneously thin, strong, optically transparent, and biocompatible have diverse applications in a range of fundamental and applied fields. While nature-derived materials offer advantages of sustainability and inherent biocompatibility compared to synthetic polymers, their brittleness and swelling, as well as surface charge and chemical functionalization non-conducive to cell growth, can hinder widespread application. In this work, we discuss the fabrication and systematic characterization of polydopamine-coated chitosan thin films. Chitosan is a widely used, partially deacetylated form of chitin, derived from crustaceans and arthropods. Polydopamine (PDA) is derived from chemistries mimicking mussel foot adhesive proteins. A facile dip-coating process of thin and flexible, uncrosslinked chitosan films in aqueous dopamine solutions leads to dramatic changes in physical and chemical properties. We show how the PDA forms time-dependent assemblies on the film surfaces, affecting surface roughness, hydrophilicity, and mechanical strength. Coating the surface for even a few seconds provides functional changes to the films. Our results shows that the optimal coating time is on the order of few hours, whereby the films are optically transparent with excellent extensibility and Young’s modulus, while further coating reduces the benefits of this surface coating. These materials are biocompatible, serving as substrates for cell adhesion and growth while maintaining good viability. Overall, these findings give insight to the effects of PDA assembly on surfaces, and illustrate how a simple, quick, and robust bioinspired coating process can prime substrates for biomedical applications such as tissue engineering, biosensing, and wound healing.

A Review on Mixed Matrix Membranes for Solvent Dehydration and Recovery Process

Solvent separation and dehydration are important operations for industries and laboratories. Processes such as distillation and extraction are not always effective and are energy-consuming. An alternate approach is offered by pervaporation, based on the solution-diffusion transport mechanism. Polymer-based membranes such as those made of Polydimethylsiloxane (PDMS) have offered good pervaporation performance. Attempts have been made to improve their performance by incorporating inorganic fillers into the PDMS matrix, in which metal-organic frameworks (MOFs) have proven to be the most efficient. Among the MOFs, Zeolitic imidazolate framework (ZIF) based membranes have shown an excellent performance, with high values for flux and separation factors. Various studies have been conducted, employing ZIF-PDMS membranes for pervaporation separation of mixtures such as aqueous-alcoholic solutions. This paper presents an extensive review of the pervaporation performance of ZIF-based mixed matrix membranes (MMMs), novel synthesis methods, filler modifications, factors affecting membrane performance as well as studies based on polymers other than PDMS for the membrane matrix. Some suggestions for future studies have also been provided, such as the use of biopolymers and self-healing membranes.

Edible Films and Coatings as Food-Quality Preservers: An Overview

Food preservation technologies are currently facing important challenges at extending the shelf-life of perishable food products (e.g., meat, fish, milk, eggs, and many raw fruits and vegetables) that help to meet the daily nutrient requirement demand. In addition, food preservation has gone beyond only preservation; the current techniques are focused on the fulfillment of two additional objectives, the suitability of the used processes and generation of environmentally friendly products with non-presence of any side effect on health. Moreover, they are also looking for additional nutritional properties. One of these preservation protocols deals with the use of edible films and coatings. Therefore, this review shows an overview of synthetic materials (e.g., glass, aluminum, plastic, and paperboard), as well as the regulations that limit their application in food packaging. Further, this review releases the current-state-of-the-art of the use of films and edible coatings as an alternative to conventional packaging, providing the main features that these biodegradable packaging should meet towards specific uses for the conservation and improvement of various food products. Herein, particular attention has been paid to the main used components (e.g., biopolymers, additives, bioactive, and probiotic components), manufacturing methods (for edible films or coatings) and their application to specific products. In addition, an outlook of the application of edible films and coatings as quality indicators of perishable products is shown.

Breakthroughs on tailoring pervaporation membranes for water desalination: A review

Due to the increase in worldwide population and urbanization, water scarcity is today one of the tough challenges of society. To date, several ongoing initiatives and strategies are aiming to find feasible alternatives to produce drinking water. Seawater desalination is addressed as a latent alternative to solve such an issue. When dealing with desalination, membrane-based technologies (such as reverse osmosis, membrane distillation, pervaporation, among others) have been successfully proposed. Pervaporation (PV) is likely the membrane operation with the less permeation rate but providing high rejection of salts. Thereby, "membranologists" are extensively working in developing new suitable membranes for pervaporation desalination. Therefore, the goal of this review paper is to elucidate and provide a comprehensive outlook of the most recent works (over the last 5-years) at developing new concepts of membranes (e.g. ultra-thin, mixed matrix/composite and inorganic) for desalination, as well as the relevant strategies in fabricating enhanced PV membranes. At this point, an important emphasis has been paid to the relevant insights in the field. This paper also addresses some principles of PV and the main drawbacks of the technique and its membranes. Through reviewing the literature, the future trends, needs, and recommendations for the new researchers are given.

Preliminary Study of In Vitro Three-Dimensional Skin Model Using an Ovine Collagen Type I Sponge Seeded with Co-Culture Skin Cells: Submerged versus Air-Liquid Interface Conditions

Three-dimensional (3D) in vitro skin models have been widely used for cosmeceutical and pharmaceutical applications aiming to reduce animal use in experiment. This study investigate capability of ovine tendon collagen type I (OTC-I) sponge suitable platform for a 3D in vitro skin model using co-cultured skin cells (CC) containing human epidermal keratinocytes (HEK) and human dermal fibroblasts (HDF) under submerged (SM) and air-liquid interface (ALI) conditions. Briefly, the extracted OTC-I was freeze-dried and crosslinked with genipin (OTC-I_GNP) and carbodiimide (OTC-I_EDC). The gross appearance, physico-chemical characteristics, biocompatibility and growth profile of seeded skin cells were assessed. The light brown and white appearance for the OTC-I_GNP scaffold and other groups were observed, respectively. The OTC-I_GNP scaffold demonstrated the highest swelling ratio (~1885%) and water uptake (94.96 ± 0.14%). The Fourier transformation infrared demonstrated amide A, B and I, II and III which represent collagen type I. The microstructure of all fabricated sponges presented a similar surface roughness with the presence of visible collagen fibers and a heterogenous porous structure. The OTC-I_EDC scaffold was more toxic and showed the lowest cell attachment and proliferation as compared to other groups. The micrographic evaluation revealed that CC potentially formed the epidermal- and dermal-like layers in both SM and ALI that prominently observed with OTC-I_GNP compared to others. In conclusion, these results suggest that OTC_GNP could be used as a 3D in vitro skin model under ALI microenvironment.

Biomass: A Renewable Source of Fuels, Chemicals and Carbon Materials

Fossil fuels have been long used as a source of carbon for synthetizing the fuels, chemicals, and carbon-based materials we use on a daily basis [...].

Emerging techniques assisting nixtamalization products and by-products processing: an overview

The production of worldwide nixtamalized products has increased in Latin American countries over the last years. For a better maize handling and exploitation of its nutritional elements, maize is subjected to a nixtamalization pretreatment protocol, which produces meaningful chemical, nutritional and quality changes in maize and its derived products, but large amounts of its primary by-product, well-known as 'nejayote', are also produced. Importantly, nejayote is usually discarded into the urbanized sewage with minimal treatment. Today, according to the recent research reports, new emerging techniques and protocols have been implemented to improve the nixtamalization products and by-products processing. New valorization approaches and biotechnological developments (including biotransformations) toward the reuse of nejayote have been developed according to its considerable content of biomolecules. Therefore, the goal of this paper is to provide a comprehensive review of the main development works at assisting nixtamalization products and by-products processing. Herein, particular attention is paid to experimental insights dealing with the valorization of nejayote.

Effect of the Formation of Ultrathin Selective Layers on the Structure and Performance of Thin-Film Composite Chitosan/PAN Membranes for Pervaporation Dehydration

The aim of the study is to improve the performance of thin-film composite (TFC) membranes with a thin selective layer based on chitosan (CS) via different approaches by: (1) varying the concentration of the CS solution; (2) changing the porosity of substrates from polyacrylonitrile (PAN); (3) deposition of the additional ultrathin layers on the surface of the selective CS layer using interfacial polymerization and layer-by-layer assembly. The developed membranes were characterized by different methods of analyses (SEM and AFM, IR spectroscopy, measuring of water contact angles and porosity). The transport characteristics of the developed TFC membranes were studied in pervaporation separation of isopropanol/water mixtures. It was found that the application of the most porous PAN-4 substrate with combination of formation of an additional polyamide selective layer by interfacial polymerization on the surface of a dense selective CS layer with the subsequent layer-by-layer deposition of five bilayers of poly (sodium 4-styrenesulfonate)/CS polyelectrolyte pair led to the significant improvement of permeance and high selectivity for the entire concentration feed range. Thus, for TFC membrane on the PAN-4 substrate the optimal transport characteristics in pervaporation dehydration of isopropanol (12–90 wt.% water) were achieved: 0.22–1.30 kg/(m²h), 99.9 wt.% water in the permeate.

The Role of New Inorganic Materials in Composite Membranes for Water Disinfection

Today, there is an increasing interest in improving the physicochemical properties of polymeric membranes by merging the membranes with different inorganic materials. These so-called composite membranes have been implemented in different membrane-based technologies (e.g., microfiltration, ultrafiltration, nanofiltration, membrane bioreactors, among others) for water treatment and disinfection. This is because such inorganic materials (such as TiO2-, ZnO-, Ag-, and Cu-based nanoparticles, carbon-based materials, to mention just a few) can improve the separation performance of membranes and also some other properties, such as antifouling, mechanical, thermal, and physical and chemical stability. Moreover, such materials display specific biological activity towards viruses, bacteria, and protozoa, showing enhanced water disinfection properties. Therefore, the aim of this review is to collect the latest advances (in the last five years) in using composite membranes and new hybrid materials for water disinfection, paying particular emphasis on relevant results and new hydride composites together with their preparation protocols. Moreover, this review addresses the main mechanism of action of different conventional and novel inorganic materials toward biologically active matter.

Thermal Behavior of Green Cellulose-Filled Thermoplastic Elastomer Polymer Blends

A recently developed cellulose hybrid chemical treatment consists of two steps: solvent exchange (with ethanol or hexane) and chemical grafting of maleic anhydride (MA) on the surface of fibers. It induces a significant decrease in cellulose moisture content and causes some changes in the thermal resistance of analyzed blend samples, as well as surface properties. The thermal characteristics of ethylene-norbornene copolymer (TOPAS) blends filled with hybrid chemically modified cellulose fibers (UFC100) have been widely described on the basis of differential scanning calorimetry and thermogravimetric analysis. Higher thermal stability is observed for the materials filled with the fibers which were dried before any of the treatments carried out. Dried cellulose filled samples start to degrade at approximately 330 °C while undried UFC100 specimens begin to degrade around 320 °C. Interestingly, the most elevated thermal resistance was detected for samples filled with cellulose altered only with solvents (both ethanol and hexane). In order to support the supposed thermal resistance trends of prepared blend materials, apparent activation energies assigned to cellulose degradation (E_A1) and polymer matrix decomposition (E_A2) have been calculated and presented in the article. It may be evidenced that apparent activation energies assigned to the first decomposition step are higher in case of the systems filled with UFC100 dried prior to the modification process. Moreover, the results have been enriched using surface free energy analysis of the polymer blends. The surface free energy polar part (Ep) raises considering samples filled with not dried UFC100. On the other hand, when cellulose fibers are dried prior to the modification process, then the blend sample’s dispersive part of surface free energy is increased with respect to that containing unmodified fiber. As polymer blend Ep exhibits higher values reflecting enhanced material degradation potential, the cellulose fibers employment leads to more eco-friendly production and responsible waste management. This is in accordance with the rules of sustainable development.

High-performance pervaporation chitosan-based membranes: new insights and perspectives

Today, the need of replacing synthetic polymers in the membrane preparation for diverse pervaporation (PV) applications has been recognized collectively and scientifically. Chitosan (CS), a bio-polymer, has been studied and proposed to achieve this goal especially in specific azeotropic water-organic, organic-water, and organic-organic separations, as well as in assisting specific processes (e.g. seawater desalination and chemical reactions). Different concepts of CS-based membranes have been developed, which include material blending and composite and mixed matrix membranes which have been tested for different separations. Hereby, the goal of this review is to provide a critical overview of the ongoing CS-based membrane developments, paying a special attention to the most relevant findings and results in the field. Furthermore, future trends of CS-based membranes in PV technology are presented, as well as concluding remarks and suggested strategies for the new scientist in the field.

Production, Preparation and Characterization of Microalgae-Based Biopolymer as a Potential Bioactive Film

Six microalgae strains were screened according to their biomass productivity and polymer synthesis, showing biomass productivity between 0.14 and 0.68 g/(L·d) for a 21-day growth period. Extracellular biopolymers from the spent culture media of Nostoc sp. (No), Synechocystis sp. (Sy), and Porphyridium purpureum (Pp) was obtained, and the yields of the clean biopolymer were 323, 204, and 83 mg/L, respectively. The crude biopolymer was cleaned up using a solid-phase extraction technique. The emulsification index E24 values for the clean biopolymer were 77.5%, 68.8%, and 73.3% at 0.323, 0.083, and 0.204 mg/mL, respectively. The clean biopolymer of the No strain showed the highest fungal growth inhibition against Fusarium verticillioides (70.2%) and Fusarium sp. (61.4%) at 2.24 mg/mL. In general, transparent and flexible biofilms were prepared using biopolymers of No and Pp. The microstructural analysis revealed the presence of pores and cracks in the biofilms, and the average roughness Ra values are 68.6 and 86.4 nm for No and Pp, respectively, and the root mean square roughness Rq values are 86.2 and 107.2 nm for No and Pp, respectively.