The Use of Cerium Compounds as Antimicrobials for Biomedical Applications

Functionalized Bone Implant Inspired by Lattice Defense Strategy: Grid Management, Precise and Effective Multiple-Prevention of Osteomyelitis Recurrence and Promote Bone Regeneration

Osteomyelitis with a high recurrence rate. Timely-prevention can avoid severe consequence and death. However, conventional drug response-release has the disadvantages of unnecessary release and waste, causing ineffective prevention. Inspired by "Lattice-defense technology", gridding lesion areas and constructing a "Triggered-precise response-release system" may be an effective multiple-prevention method. Here, a new strict pH-triggered response drug controlled-release mechanism was proposed innovatively to construct a "Triggered-precise response-release system" and achieve multiple-effective prevention. PO4 3--Ce3+ strict pH responsive release system is prepared through simultaneous hydration reaction of solution-polymerization and compounded in bone-implant. The dispersed system only targets micro-interface contact areas, achieving gridded management of the lesion site. In a normal environment, Ce3+ is captured by PO4 3- and kept electrostatic-attraction balance, ensuring the zero-concentration Ce3+ release continuously. Once osteomyelitis recurs and pH decrease, H+ at the interface will combine with PO4 3- under electrostatic drive and disrupt potential balance, achieving the release of Ce3+ only when the infection recurs. In vivo experiments was confirmed effective prevention and excellent promote bone regeneration. The adoption of "Lattice defense technology" has achieved accuracy spatiotemporal of drug delivery. Even if other lesion sites unfortunately recur again, effective-prevention can be guaranteed. Bone-implant show great potential in preventing osteomyelitis.

Periodic Table of Immunomodulatory Elements and Derived Two-Dimensional Biomaterials

Periodic table of chemical elements serves as the foundation of material chemistry, impacting human health in many different ways. It contributes to the creation, growth, and manipulation of functional metallic, ceramic, metalloid, polymeric, and carbon-based materials on and near an atomic scale. Recent nanotechnology advancements have revolutionized the field of biomedical engineering to tackle longstanding clinical challenges. The use of nano-biomaterials has gained traction in medicine, specifically in the areas of nano-immunoengineering to treat inflammatory and infectious diseases. Two-dimensional (2D) nanomaterials have been found to possess high bioactive surface area and compatibility with human and mammalian cells at controlled doses. Furthermore, these biomaterials have intrinsic immunomodulatory properties, which is crucial for their application in immuno-nanomedicine. While significant progress has been made in understanding their bioactivity and biocompatibility, the exact immunomodulatory responses and mechanisms of these materials are still being explored. Current work outlines an innovative "immunomodulatory periodic table of elements" beyond the periodic table of life, medicine, and microbial genomics and comprehensively reviews the role of each element in designing immunoengineered 2D biomaterials in a group-wise manner. It recapitulates the most recent advances in immunomodulatory nanomaterials, paving the way for the development of new mono, hybrid, composite, and hetero-structured biomaterials.

Nanoceria Anti-inflammatory and Antimicrobial Nanodrug: Cellular and Molecular Mechanism of Action

INTRODUCTION

Nanoceria is a well-known nanomaterial with various properties, including antioxidant, proangiogenic, and therapeutic effects. Despite its potential, there are still aspects that require further exploration, particularly its anti-inflammatory and antimicrobial activities.

METHODS

The global demand for novel anti-inflammatory and antimicrobial drugs underscores the significance of understanding nanoceria in both contexts. In this study, we evaluated the effect of nanoceria on macrophage polarization to better understand its anti-inflammatory effects. Additionally, we investigated the mechanism of action of nanoceria against Cryptococcus neoformans (ATCC 32045), Candida parapsilosis (ATCC 22019), Candida krusei (ATCC 6258), and Candida albicans.

RESULTS

The results demonstrated that nanoceria can polarize macrophages toward an anti-inflammatory profile, revealing the cellular mechanisms involved in the anti-inflammatory response. Concerning the antimicrobial effect, it was observed that nanoceria have a more pronounced impact on Candida parapsilosis, leading to the formation of pronounced pores on the surface of this species.

CONCLUSION

Finally, biochemical analysis revealed transitory alterations, mainly in liver enzymes. The data support the use of nanoceria as a potential anti-inflammatory and antimicrobial drug and elucidate some of the mechanisms involved, shedding light on the properties of this nanodrug.

Effect of cerium oxide on iron metabolism in mice

The use of metal nanoparticles such as cerium oxide nanoparticles (nanoceria) in living organisms is attracting increasing attention. We administered nanoceria to chronic kidney disease model rats, including a 5/6 nephrectomy model and adenine administration model rats, and reported high phosphorus adsorption capacity and renal function improvement effects of nanoceria. However, the iron ion concentration in the serum fluctuated significantly after administration. Therefore, we investigated changes in proteins related to iron metabolism following administration of nanoceria to normal mice without chronic kidney disease over different periods of time. Nanoceria were administered to 10-week-old C57BL/6 mice for 4 or 12 weeks. Another group was administrated lanthanum carbonate, which is currently used as a phosphorus adsorbent. The amount of iron in the serum and the concentration of transferrin in the liver were significantly increased following nanoceria administration, and the amount of iron in the liver was significantly decreased. There were no changes in serum hepcidin, ferroportin, cholesterol, or low-density lipoprotein levels. These results indicate that nanoceria administration can affect iron metabolism in mice. Although the detailed mechanism remains unknown, caution is warranted when considering biological utilization in the future.

Better Ce (III) Sorption Properties of Unprocessed Chitinous Waste from Hermetia illucens than Commercial Chitosans

Insect farming generates a new type of chitinous waste in the form of dead specimens that have died of natural causes and insect moults (puparia), particularly large amounts of which are generated during the rearing of holometabolous insects. Following the circular economy paradigm, we treated waste in the form of puparia and dead adults of H. illucens as a valuable material, i.e., as sources of chitin, and tested it as a sorbent for cerium, a lanthanide of great industrial importance. For comparison, non-treated, raw insect materials and commercial chitosans were also investigated. Chitin extracted from H. illucens showed an adsorption capacity at the same level as commercially available, marine-source chitin (approximately 6 mg Ce·g-1). However, more interestingly, raw materials exhibited much higher adsorption capacities-dead adults were similar to commercial chitosans (approximately 32 mg Ce·g-1), while puparia demonstrated twice the performance (approximately 60 mg Ce·g-1). This indicates that unprocessed waste can be used as environmentally friendly, cost-effective Ce biosorbents with comparable or even better sorption capacity than chitosans, whose production requires intense chemical processing.

Development of Technology for the Synthesis of Nanocrystalline Cerium Oxide Under Production Conditions with the Best Regenerative Activity and Biocompatibility for Further Creation of Wound-Healing Agents

Background/Objectives: The issue of effective wound healing remains highly relevant. The objective of the study is to develop an optimal method for the synthesis of nanosized cerium oxide powder obtained via the thermal decomposition of cerium carbonate precipitated from aqueous nitrate solution for the technical creation of new drugs in production conditions; the select modification of synthesis under different conditions based on the evaluation of the physicochemical characteristics of the obtained material and its biological activity, and an evaluation of the broad-spectrum effect on cells involved in the regeneration of skin structure as well as antimicrobial properties. Methods: Several modes of the industrial synthesis of cerium dioxide nanoparticles (NPs) were carried out. The synthesis stages and the chemical and physical parameters of the obtained NPs were described using transmission electron microscopy (TEM), X-ray diffraction, Raman spectroscopy, and mass spectrometry. The cell cultures of human fibroblasts and keratinocytes were cultured with different concentrations of different nanoceria variations, and the cytotoxicity and the metabolic and proliferative activity were investigated. An MTT test and cell counting were performed. The antimicrobial activity of CeO2 variations at a concentration of 0.1-0.0001 M against Pseudomonas aeruginosa was studied. Results: The purity of the synthesized nanoceria powders in all the batches was >99.99%. According to TEM data, the size of the NPs varied from 1 nm to 70 nm under different conditions and methodologies. The most optimal technology for the synthesis of the nanoceria with the maximum biological effect was selected. A method for obtaining the most bioactive NPs of optimal size (up to 10 nm) was proposed. The repeatability of the results of the proposed method of nanoceria synthesis in terms of particle size was confirmed. It was proven that the more structural defects on the surface of the CeO2 crystal lattice, the higher the efficiency of the NPs due to oxygen vacancies. The strain provided the best redox activity and antioxidant properties of the nanoceria, which was demonstrated by better regenerative potential on various cell lines. The beneficial effect of synthesized nanoceria on the proliferative and metabolic activity of the cell lines involved in skin regeneration (human fibroblasts, human keratinocytes) was demonstrated. The antimicrobial effect of synthesized nanoceria on the culture of the most-resistant-to-modern-antibiotics microorganism Pseudomonas aeruginosa was confirmed. The optimal concentrations of the nanoceria to achieve the maximum biological effect were determined (10-3 M). Conclusions: It was possible to develop a method for the industrial synthesis of nanoceria, which can be used to produce drugs and medical devices containing CeO2 NPs.

Experimental investigation of gamma-ray interaction parameters and buildup factors in lanthanide compounds: Insights into penetration depth

This experimental investigation focuses on the gamma-ray interaction parameters and the buildup factor in lanthanide compounds (CeO2, Ce(SO4)2, Dy2(SO4)3, C3O9Sm2, C3Gd2O9, Pr2O3). These compounds were exposed to weak radioactive gamma sources with energies of 356, 511, 662, 1173, 1275, and 1332 keV by adopting narrow and broad beam geometry experimental arrangements. The incident and transmitted radiation intensities were measured using a NaI (Tl) detector. Experimentally measured values of mass attenuation coefficient and effective atomic number of lanthanide compounds were found to be in precise agreement with theoretical values obtained from NIST XCOM and Direct-Zeff database respectively. Additionally, the experimentally determined buildup factor values were compared with energy absorption buildup factor (EABF) and exposure buildup factor (EBF) values obtained from Phy-X/PSD software, providing insights into the gamma-ray penetration depth in terms of mean free path (MFP). At 356 keV, the EABF analysis showed that most compounds had a penetration depth of around 8 mean free paths. In contrast, the EBF analysis indicated penetration depths exceeding 10 mean free paths for all compounds except Ce (SO4)2. This new approach holds immense potential for transformative advancements in medical diagnostics, therapy, and the development of innovative technologies in nuclear sciences.

Evaluation of phytoactive contents and antibacterial activities of green synthesised cerium oxide nanoparticles using Melastoma sp. leaf extract as the capping agent

Simple and green methods of developing nanoparticles (NPs) have attracted the attention of researchers. Literature on utilising leaf extract to prepare cerium oxide (CeO2 NPs) is scarce. The present study synthesised leaf-mediated-CeO2 NPs to produce nanopowders of controllable sizes for further applications. The study is the first to report the optimised parameters (pH 7, 5 g/150 mL concentration of the leaf extract, and 3 h of reaction time) of procuring CeO2 NPs using Melastoma sp. leaf extract as the capping agent with excellent properties. The absorbance of the NPs suspension obtained in this study was recorded at approximately 252 nm with Ultraviolet-Visible (UV-Vis) Spectroscopy. Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), and Transmission Electron Microscopy (TEM) were also utilised to characterise and confirm the CeO2 NPs prepared. The XRD spectra documented the purity of the NPs at specific diffraction patterns, while TEM revealed the spherical form of the NPs with a particle size of 16 nm. The formation of CeO2 NPs has been confirmed from the FTIR spectra procured, which exhibited a Ce-O peak at 555 nm. Phytochemical screening test and FT-IR analysis of leaf extract revealed the existence of flavonoids, terpenoids, sugars, saponins, quinones, and glycosides. The NPs suspensions of varying concentrations (control, 50, 100, 150, 200, and 250 μg/mL) were prepared and employed for evaluations against Gram-positive and -negative bacteria. Resultantly, CeO2 NPs demonstrated antibacterial activities against both bacteria types. The highest antibacterial activities were recorded against E. coli and K. pneumonia at 1.83 ± 0.137 and 1.83 ± 0.14 mm maximum inhibition zones, respectively, at 250 mg/uL of the NPs.

Development of Broad-Range Microbial Minimal Culture Medium for Lanthanide Studies

Rare Earth Elements (REE), also known as Lanthanides (Ln3+), are a group of 17 elements showing peculiar physical and chemical properties. Unlike technological applications, very little is known about the physiological role and toxicity of Ln3+ on biological systems, in particular on microorganisms (e.g., bacteria), which represent the most abundant domains on our planet. Up to now, very limited studies have been conducted due to Ln3+ precipitation with some anions commonly present in the culture media. Therefore, the development of a minimal medium is essential to allow the study of Ln3+-microbial interactions, limiting considerably the precipitation of insoluble salts. In this regard, a new minimal culture medium capable of solubilizing large amounts of Ln3+ and allowing the growth of different microbial taxa was successfully developed. Assays have shown that the medium is capable of solubilizing Ln3+ up to 100 times more than other common culture media and allowing the growth of 63 bacteria and 5 fungi. The kinetic growth of one yeast and one Gram-positive bacterium has been defined, proving to support superior growth and biomass compared to other commonly used minimal media. Moreover, the sensitivity and uptake/absorption of a Bacillus stratosphericus strain were tested, highlighting its capability to tolerate concentrations up to 10 mM of either Cerium, Gadolinium or Lanthanum and accumulate different quantities of the three.

Cerium Dioxide-Dextran Nanocomposites in the Development of a Medical Product for Wound Healing: Physical, Chemical and Biomedical Characteristics

PURPOSE OF THE STUDY

the creation of a dextran coating on cerium oxide crystals using different ratios of cerium and dextran to synthesize nanocomposites, and the selection of the best nanocomposite to develop a nanodrug that accelerates quality wound healing with a new type of antimicrobial effect.

MATERIALS AND METHODS

Nanocomposites were synthesized using cerium nitrate and dextran polysaccharide (6000 Da) at four different initial ratios of Ce(NO3)3x6H2O to dextran (by weight)-1:0.5 (Ce0.5D); 1:1 (Ce1D); 1:2 (Ce2D); and 1:3 (Ce3D). A series of physicochemical experiments were performed to characterize the created nanocomposites: UV-spectroscopy; X-ray phase analysis; transmission electron microscopy; dynamic light scattering and IR-spectroscopy. The biomedical effects of nanocomposites were studied on human fibroblast cell culture with an evaluation of their effect on the metabolic and proliferative activity of cells using an MTT test and direct cell counting. Antimicrobial activity was studied by mass spectrometry using gas chromatography-mass spectrometry against E. coli after 24 h and 48 h of co-incubation.

RESULTS

According to the physicochemical studies, nanocrystals less than 5 nm in size with diffraction peaks characteristic of cerium dioxide were identified in all synthesized nanocomposites. With increasing polysaccharide concentration, the particle size of cerium dioxide decreased, and the smallest nanoparticles (<2 nm) were in Ce2D and Ce3D composites. The results of cell experiments showed a high level of safety of dextran nanoceria, while the absence of cytotoxicity (100% cell survival rate) was established for Ce2D and C3D sols. At a nanoceria concentration of 10-2 M, the proliferative activity of fibroblasts was statistically significantly enhanced only when co-cultured with Ce2D, but decreased with Ce3D. The metabolic activity of fibroblasts after 72 h of co-cultivation with nano composites increased with increasing dextran concentration, and the highest level was registered in Ce3D; from the dextran group, differences were registered in Ce2D and Ce3D sols. As a result of the microbiological study, the best antimicrobial activity (bacteriostatic effect) was found for Ce0.5D and Ce2D, which significantly inhibited the multiplication of E. coli after 24 h by an average of 22-27%, and after 48 h, all nanocomposites suppressed the multiplication of E. coli by 58-77%, which was the most pronounced for Ce0.5D, Ce1D, and Ce2D.

CONCLUSIONS

The necessary physical characteristics of nanoceria-dextran nanocomposites that provide the best wound healing biological effects were determined. Ce2D at a concentration of 10-3 M, which stimulates cell proliferation and metabolism up to 2.5 times and allows a reduction in the rate of microorganism multiplication by three to four times, was selected for subsequent nanodrug creation.

Hydrothermally synthesized biofunctional ceria nanoparticles using orange peel extract: optimization, characterization, and antibacterial and antioxidant properties

In this research, cerium oxide nanoparticles were synthesized using orange peel extract via a hydrothermal method. An equal ratio of orange peel extract to cerium nitrate salt led to the formation of cerium hydroxide carbonate, whereas a 1 : 10 ratio formed cerium oxide. The hydrothermal treatment was conducted for durations of 5 and 25 hours. Scanning electron microscopy (SEM) images revealed that the hydrothermal samples treated for 5 hours exhibited significant agglomeration in both extract to salt ratios after heat treatment. X-ray diffraction patterns confirmed that all samples were converted into cerium oxide after heating at 500 °C for 3 hours. Based on XRD and SEM results, three cerium oxide samples, including those synthesized through the 25 hours hydrothermal process with a 1 : 10 ratio and the 25 hours hydrothermal process with both ratios and subsequent heat treatment, were selected for further investigation. Fourier transform infrared (FT-IR) analysis revealed more adsorption of the functional groups of orange peel extract on the surface of the as-synthesized sample. Moreover, the heat-treated sample with a 1 : 10 ratio, initially cerium oxide, displayed a higher amount of surface functional groups than the one with a 1 : 1 ratio which was initially cerium hydroxide carbonate. The antibacterial activities of the samples were determined using the colony count method. Activities of all samples against Gram-negative bacteria are in the range of 91.5-93.2% with a negligible difference, whereas the as-synthesized sample exhibited a superior activity of 96.6 ± 1.8% against Gram-positive bacteria compared to the other two heat-treated samples. The 87.3% antioxidant activity of the as-synthesized sample significantly surpassed that of the other two samples, as evaluated by the DPPH radical scavenging method.

Synergistic Improvement of Antibacterial and Osteogenic Differentiation of Thermomechanically Processed Mg-Zr-Sr-Ce Alloy: Insights into the Role of Precipitate Evolution Supported by AIMD Simulation Study

In the present study, we have discussed the influence of forging temperature (623 K (FT623), 723 K (FT723) and 823 K (FT823)) on microstructure and texture evolution and its implication on mechanical behavior, in vitro-in vivo biocorrosion, antibacterial response, and cytocompatibility of microalloyed Mg-Zr-Sr-Ce alloy. Phase analysis, SEM, and TEM characterization confirm the presence of Mg12Ce precipitate, and its stability was further validated by performing ab initio molecular dynamic simulation study. FT723 exhibits strengthened basal texture, higher fraction of second phases, and particle-stimulated nucleation-assisted DRX grains compared to other two specimens, resulting in superior strength with comparable ductility. FT723 also exhibits superior corrosion resistance mainly due to the strengthened basal texture and lower dislocation density. All the specimens exhibit excellent antibacterial behavior with Gram-negative E. coli, Gram-positive Staphylococcus aureus, and Pseudomonas aeruginosa bacteria. 100% reduction of bacterial growth is observed within 24 h of culture of the specimens. Cytocompatibility was determined by challenging specimen extracts with the MC3T3-E1 cell lines. FT723 specimen exhibits the highest cell proliferation and alkaline phosphatase activity (ALP) because of its superior corrosion resistance. The ability of the specimens to be used in orthopedic implant application was evaluated by in vivo study in rabbit femur. Neither tissue-related infection nor the detrimental effect surrounding the implant was confirmed from histological analysis. Significant higher bone regeneration surrounding the FT723 specimen was observed in SEM analysis and fluorochrome labeling. After 60 days, the FT723 specimen exhibits the highest bone formation, suggesting it is a suitable candidate for orthopedic implant application.

Doxorubicin loaded cerium substituted hydroxyapatite nanoparticles: A promising new therapeutic approach for bone regeneration, doxorubicin delivery, and cancer treatment

The current study used the precipitation method to prepare pure calcium hydroxyapatite (HA) and cerium-substituted hydroxyapatite (Ce-HA) nanoparticles, where cerium ions were exchanged into the HA structure at different concentrations ranging from 3 to 7 wt%. X-ray powder diffraction (XRD), field emission scanning electron microscopy (FE-SEM), high resolution transmission electron microscopy (HR-TEM), Fourier transform infrared (FTIR) spectroscopy, Brunauer-Emmett-Teller (BET) surface area measurements, and zeta potential were used to examine the structural characteristics of the nanoparticles. Additionally, the antibacterial and antifungal effects of the produced materials on Gram-positive, Gram-negative, and fungal bacterial species were studied. Nanoparticles with cerium doping showed effective antibacterial and antifungal properties. All samples were tested for bioactivity in simulated body fluid (SBF), and the formation of an apatite layer on their surfaces was highlighted using SEM in conjunction with energy-dispersive X-rays (EDX).Doxorubicin (DOX) release from Ce-HA nanoparticles and pure HA was tested in phosphate-buffered saline (PBS) for up to 28 days. Both nanoparticles were able to release the drug while still being semi-fully loaded. Similarly, the cytotoxic effect of all produced samples on the MG-63 cell line was evaluated, and all samples showed good cytocompatibility. The cytotoxic effect of doxorubicin-loaded nanoparticles showed promising anticancer activity against bone cancer cells, especially samples with high cerium content. The resulting nanoparticles show excellent promising ability for the delivery of doxorubicin to bone cancer with the capacity for bone regeneration.

Antimicrobial Activity of Citrate-Coated Cerium Oxide Nanoparticles

The purpose of this study was to investigate the antimicrobial activity of citrate-stabilized sols of cerium oxide nanoparticles at different concentrations via different microbiological methods and to compare the effect with the peroxidase activity of nanoceria for the subsequent development of a regeneration-stimulating medical and/or veterinary wound-healing product providing new types of antimicrobial action. The object of this study was cerium oxide nanoparticles synthesized from aqueous solutions of cerium (III) nitrate hexahydrate and citric acid (the size of the nanoparticles was 3-5 nm, and their aggregates were 60-130 nm). Nanoceria oxide sols with a wide range of concentrations (10-1-10-6 M) as well as powder (the dry substance) were used. Both bacterial and fungal strains (Bacillus subtilis, Bacillus cereus, Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Proteus vulgaris, Candida albicans, Aspergillus brasielensis) were used for the microbiological studies. The antimicrobial activity of nanoceria was investigated across a wide range of concentrations using three methods sequentially; the antimicrobial activity was studied by examining diffusion into agar, the serial dilution method was used to detect the minimum inhibitory and bactericidal concentrations, and, finally, gas chromatography with mass-selective detection was performed to study the inhibition of E. coli's growth. To study the redox activity of different concentrations of nanocerium, we studied the intensity of chemiluminescence in the oxidation reaction of luminol in the presence of hydrogen peroxide. As a result of this study's use of the agar diffusion and serial dilution methods followed by sowing, no significant evidence of antimicrobial activity was found. At the same time, in the current study of antimicrobial activity against E. coli strains using gas chromatography with mass spectrometry, the ability of nanoceria to significantly inhibit the growth and reproduction of microorganisms after 24 h and, in particular, after 48 h of incubation at a wide range of concentrations, 10-2-10-5 M (48-95% reduction in the number of microbes with a significant dose-dependent effect) was determined as the optimum concentration. A reliable redox activity of nanoceria coated with citrate was established, increasing in proportion to the concentration, confirming the oxidative mechanism of the action of nanoceria. Thus, nanoceria have a dose-dependent bacteriostatic effect, which is most pronounced at concentrations of 10-2-10-3 M. Unlike the effects of classical antiseptics, the effect was manifested from 2 days and increased during the observation. To study the antimicrobial activity of nanomaterials, it is advisable not to use classical qualitative and semi-quantitative methods; rather, the employment of more accurate quantitative methods is advised, in particular, gas chromatography-mass spectrometry, during several days of incubation.

Biomedical applications of cerium vanadate nanoparticles: a review

Cerium vanadate nanoparticles (CeVO4 NPs), which are members of the rare earth orthovanadate nanomaterial family, have generated considerable interest due to their diverse properties and prospective biomedical applications. The current study, which provides a comprehensive overview of the synthesis and characterization techniques for CeVO4 NPs, emphasizes the sonochemical method as an efficient and straightforward technique for producing CeVO4 NPs with tunable size and shape. This paper investigates the toxicity and biocompatibility of CeVO4 NPs, as well as their antioxidant and catalytic properties, which allow them to modify the redox state of biological systems and degrade organic pollutants. In addition, the most recent developments in the medicinal applications of CeVO4 NPs, such as cancer treatment, antibacterial activity, biosensing, and drug or gene delivery, are emphasized. In addition, the disadvantages of CeVO4 NPs, such as stability, aggregation, biodistribution, and biodegradation, are outlined, and several potential solutions are suggested. The research concludes with data and recommendations for developing and enhancing CeVO4 NPs in the biomedical industry.

Metal-Based Nanoparticles for Cardiovascular Diseases

Globally, cardiovascular diseases (CVDs) are the leading cause of death and disability. While there are many therapeutic alternatives available for the management of CVDs, the majority of classic therapeutic strategies were found to be ineffective at stopping or significantly/additionally slowing the progression of these diseases, or they had unfavorable side effects. Numerous metal-based nanoparticles (NPs) have been created to overcome these limitations, demonstrating encouraging possibilities in the treatment of CVDs due to advancements in nanotechnology. Metallic nanomaterials, including gold, silver, and iron, come in various shapes, sizes, and geometries. Metallic NPs are generally smaller and have more specialized physical, chemical, and biological properties. Metal-based NPs may come in various forms, such as nanoshells, nanorods, and nanospheres, and they have been studied the most. Massive potential applications for these metal nanomaterial structures include supporting molecular imaging, serving as drug delivery systems, enhancing radiation-based anticancer therapy, supplying photothermal transforming effects for thermal therapy, and being compounds with bactericidal, fungicidal, and antiviral qualities that may be helpful for cardiovascular diseases. In this context, the present paper aims to review the applications of relevant metal and metal oxide nanoparticles in CVDs, creating an up-to-date framework that aids researchers in developing more efficient treatment strategies.

Dysprosium-containing Cobalt Sulfide Nanoparticles as Anticancer Drug Carriers

BACKGROUND

Among various materials designed for anticancer drug transport, sulfide nanoparticles are uniquely intriguing owing to their spectral characteristics. Exploration of newer nanoscale copper sulfide particles with dysprosium doping is reported herein. It leads to a change in the physicochemical properties of the sulfide nanoparticles and hence the difference in drug release and cytotoxicity.

OBJECTIVE

We intend to purport the suitably engineered cobalt sulfide and dysprosium-doped cobalt sulfide nanoparticles that are magnetic and NIR-absorbing, as drug delivery vehicles. The drug loading and release are based on the supramolecular drug complex formation on the surface of the nanoparticles.

METHOD

The nanomaterials are synthesized employing hydrothermal procedures, coated with a biocompatible poly-β-cyclodextrin, and characterized using the methods of diffractometry, microscopy, spectroscopy, thermogravimetry and magnetometry. The sustained drug release is investigated in vitro. 5-Fluorouracil is loaded in the nanocarriers. The empty and 5-fluorouracil-loaded nanocarriers are screened for their anti-breast cancer activity in vitro on MCF-7 cells.

RESULTS

The size of the nanoparticles is below 10 nm. They show soft ferromagnetic characteristics. Further, they show broad NIR absorption bands extending up to 1200 nm, with the dysprosium-doped material displaying greater absorbance. The drug 5-fluorouracil is encapsulated in the nanocarriers and released sustainably, with the expulsion duration extending over 10 days. The IC50 of the blank and the drug-loaded cobalt sulfide are 16.24 ± 3.6 and 12.2 ± 2.6 μg mL-1, respectively. For the drug-loaded, dysprosium-doped nanocarrier, the IC50 value is 9.7 ± 0.3 μg mL-1.

CONCLUSION

The ultrasmall nanoparticles possess a size suitable for drug delivery and are dispersed well in the aqueous medium. The release of the loaded 5-fluorouracil is slow and sustained. The anticancer activity of the drug-loaded nanocarrier shows an increase in efficacy, and the cytotoxicity is appreciable due to the controlled release. The nanocarriers show multi-functional characteristics, i.e., magnetic and NIR-absorbing, and are promising drug delivery agents.

Remineralization of Dentin with Cerium Oxide and Its Potential Use for Root Canal Disinfection

Objective

This study was to investigate a novel antibacterial biomimetic mineralization strategy for exploring its potential application for root canal disinfection when stabilized cerium oxide was used.

Material and Methods

A biomimetic mineralization solution (BMS) consisting of cerium nitrate and dextran was prepared. Single-layer collagen fibrils, collagen membranes, demineralized dentin, and root canal system were treated with the BMS for mineralization. The mineralized samples underwent comprehensive characterization using various techniques, including transmission electron microscopy (TEM), high-resolution TEM (HRTEM), Fourier transform infrared spectroscopy (FTIR), scanning transmission electron microscopy (STEM), selected-area electron diffraction (SAED), energy-dispersive X-ray spectroscopy (EDX), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), and micro-CT. Additionally, the antimicrobial properties of the BMS and the remineralized dentin were also analyzed with broth microdilution method, live/dead staining, and SEM.

Results

Cerium ions in the BMS underwent a transformation into cerium oxide nanoparticles, which were deposited in the inter- and intra-fibrillar collagen spaces through a meticulous bottom-up process. XPS analysis disclosed the presence of both Ce (III) and Ce (IV) of the generated cerium oxides. A comprehensive examination utilizing SEM and micro-CT identified the presence of cerium oxide nanoparticles deposited within the dentinal tubules and lateral canals of the root canal system. The BMS and remineralized dentin exhibited substantial antibacterial efficacy against E. faecalis, as substantiated by assessments involving the broth dilution method and live/dead staining technique. The SEM findings revealed the cell morphological changes of deceased E. faecalis.

Conclusion

This study successfully demonstrated antibacterial biomimetic mineralization as well as sealing dentinal tubules and lateral branches of root canals using cerium nitrate and dextran. This novel biomimetic mineralization could be used as an alternative strategy for root canal disinfection.

Influence of the Synthesis Scheme of Nanocrystalline Cerium Oxide and Its Concentration on the Biological Activity of Cells Providing Wound Regeneration

In the ongoing search for practical uses of rare-earth metal nanoparticles, cerium dioxide nanoparticles (nanoceria) have received special attention. The purpose of this research was to study the biomedical effects of nanocrystalline forms of cerium oxide obtained by different synthesis schemes and to evaluate the effect of different concentrations of nanoceria (from 10-2 to 10-6 M) on cells involved in the regeneration of skin cell structures such as fibroblasts, mesenchymal stem cells, and keratinocytes. Two different methods of nanoceria preparation were investigated: (1) CeO-NPs-1 by precipitation from aqueous solutions of cerium (III) nitrate hexahydrate and citric acid and (2) CeO-NPs-2 by hydrolysis of ammonium hexanitratocerate (IV) under conditions of thermal autoclaving. According to the X-ray diffraction, transmission electron microscopy, and dynamic light scattering data, CeO2-1 consists of individual particles of cerium dioxide (3-5 nm) and their aggregates with diameters of 60-130 nm. CeO2-2 comprises small aggregates of 8-20 nm in diameter, which consist of particles of 2-3 nm in size. Cell cultures of human fibroblasts, human mesenchymal stem cells, and human keratinocytes were cocultured with different concentrations of nanoceria sols (10-2, 10-3, 10-4, 10-5, and 10-6 mol/L). The metabolic activity of all cell types was investigated by MTT test after 48 and 72 h, whereas proliferative activity and cytotoxicity were determined by quantitative cell culture counting and live/dead test. A dependence of biological effects on the method of nanoceria preparation and concentration was revealed. Data were obtained with respect to the optimal concentration of sol to achieve the highest metabolic effect in the used cell cultures. Hypotheses about the mechanisms of the obtained effects and the structure of a fundamentally new medical device for accelerated healing of skin wounds were formulated. The method of nanoceria synthesis and concentration fundamentally and significantly change the biological activity of cell cultures of different types-from suppression to pronounced stimulation. The best biological activity of cell cultures was determined through cocultivation with sols of citrate nanoceria (CeO-NPs-1) at a concentration of 10-3-10-4 M.

Nanoceria Aggregate Formulation Promotes Buffer Stability, Cell Clustering, and Reduction of Adherent Biofilm in Streptococcus mutans

Streptococcus mutans is one of the key etiological factors in tooth-borne biofilm development that leads to dental caries in the presence of fermentable sugars. We previously reported on the ability of acid-stabilized nanoceria (CeO2-NP) produced by the hydrolysis of ceric salts to limit biofilm adherence of S. mutans via non-bactericidal mechanism(s). Herein, we report a chondroitin sulfate A (CSA) formulation (CeO2-NP-CSA) comprising nanoceria aggregates that promotes resistance to bulk precipitation under a range of conditions with retention of the biofilm-inhibiting activity, allowing for a more thorough mechanistic study of its bioactivity. The principal mechanism of reduced in vitro biofilm adherence of S. mutans by CeO2-NP-CSA is the production of nonadherent cell clusters. Additionally, dose-dependent in vitro human cell toxicity studies demonstrated no additional toxicity beyond that of equimolar doses of sodium fluoride, currently utilized in many oral health products. This study represents a unique approach and use of a nanoceria aggregate formulation with implications for promoting oral health and dental caries prevention as an adjunctive treatment.

Monitoring silica core@shell nanoparticle-bacterial film interactions using the multi-parametric surface plasmon resonance technique

In a healthcare setting, biofilms are a major source of infection and difficult to eradicate once formed. Nanoparticles (NPs) can be designed to effectively penetrate biofilms to more efficiently either deliver antibiotic drugs throughout the biofilm matrix or elicit inherent antibiofilm activity. Antibacterial cerium oxide (CeO2) NPs were employed as core material and coated with a mesoporous silica shell (MSN) to generate cerium oxide coated mesoporous silica NPs (CeO2@MSN). Detailed studies of NP-biofilm interactions are required to rationally develop NP platforms to prevent biofilm-related infections. This work developed and implemented a unique label-free analysis platform for the real-time monitoring of bacterial biofilm formation and then assessed the interactions of antibacterial NPs. An analysis platform which allows bacterial biofilms to grow and develop in situ in flow within the multi-parametric surface plasmon resonance (MP-SPR) instrument was established. This enabled simultaneous monitoring and detection of biofilm growth phases, structure, and interactions between differentially charged CeO2@MSNs and bacterial biofilms. Positively charged antibacterial NPs (polyethyleneimine functionalized CeO2@MSNs) were found to be the most efficient to penetrate the biofilm. The MP-SPR analysis platform was shown to be a powerful tool for monitoring biofilm development in real-time and to analyze biofilm properties and NP-biofilm interactions.

Design and Study of Nanoceria Modified by 5-Fluorouracil for Gel and Polymer Dermal Film Preparation

In this work we studied nanoceria (CeO2NPs) and nanoceria modified by 5-fluorouracil (5FU) as potential APIs. Nanoceria were synthesized by precipitation in a matrix of hydroxyethyl cellulose or hydroxypropylmethyl cellulose, using cerium (III) nitrate and meglumine. Nanoceria properties were estimated by UV, FTIR and X-ray photoelectron spectra; scanning electron and atomic force microscopy; powder X-ray diffraction patterns and energy dispersive X-ray microanalysis. The cytotoxicity of nanoceria and polymer-protected nanoparticles was evaluated using the established cell line NCTC clone 929 (C3H/An mouse, subcutaneous connective tissue, clone of L. line). The morphology and metabolic activity of nanoparticles at 10 μg∙mL-1 of cells was not significant. In addition, the cytotoxic effects of nanoceria were assessed on two human colorectal cancer cell lines (HT29 and HCT116), murine melanoma B16 cells and normal human skin fibroblasts. An inhibitory effect was shown for HCT116 human colorectal cancer cells. The IC50 values for pure CeO2NPs and CeO2NPs-5FU were 219.0 ± 45.6 μg∙mL-1 and 89.2 ± 14.0 μg∙mL-1, respectively. On the other hand, the IC50 of 5FU in the combination of CeO2NPs-5FU was 2-fold higher than that of pure 5FU, amounting to 5.0 nmol∙mL-1. New compositions of nanoceria modified by 5-fluorouracil in a polymer matrix were designed as a dermal polymer film and gel. The permeability of the components was studied using a Franz cell.

Design and Study of Nanoceria Modified by 5-Fluorouracil for Gel and Polymer Dermal Film Preparation

In this work we studied nanoceria (CeO2NPs) and nanoceria modified by 5-fluorouracil (5FU) as potential APIs. Nanoceria were synthesized by precipitation in a matrix of hydroxyethyl cellulose or hydroxypropylmethyl cellulose, using cerium (III) nitrate and meglumine. Nanoceria properties were estimated by UV, FTIR and X-ray photoelectron spectra; scanning electron and atomic force microscopy; powder X-ray diffraction patterns and energy dispersive X-ray microanalysis. The cytotoxicity of nanoceria and polymer-protected nanoparticles was evaluated using the established cell line NCTC clone 929 (C3H/An mouse, subcutaneous connective tissue, clone of L. line). The morphology and metabolic activity of nanoparticles at 10 μg∙mL−1 of cells was not significant. In addition, the cytotoxic effects of nanoceria were assessed on two human colorectal cancer cell lines (HT29 and HCT116), murine melanoma B16 cells and normal human skin fibroblasts. An inhibitory effect was shown for HCT116 human colorectal cancer cells. The IC50 values for pure CeO2NPs and CeO2NPs-5FU were 219.0 ± 45.6 μg∙mL−1 and 89.2 ± 14.0 μg∙mL−1, respectively. On the other hand, the IC50 of 5FU in the combination of CeO2NPs-5FU was 2-fold higher than that of pure 5FU, amounting to 5.0 nmol∙mL−1. New compositions of nanoceria modified by 5-fluorouracil in a polymer matrix were designed as a dermal polymer film and gel. The permeability of the components was studied using a Franz cell.

Microwave-Assisted Hydrothermal Treatment of Multifunctional Substituted Hydroxyapatite with Prospective Applications in Bone Regeneration

Orthopedic bone graft infections are major complications in today's medicine, and the demand for antibacterial treatments is expanding because of the spread of antibiotic resistance. Various compositions of hydroxyapatite (HAp) in which Calcium (Ca²⁺) ions are substituted with Cerium (Ce³⁺) and Magnesium (Mg²⁺) are herein proposed as biomaterials for hard tissue implants. This approach gained popularity in recent years and, in the pursuit of mimicking the natural bone mineral's composition, over 70 elements of the Periodic Table were already reported as substituents into HAp structure. The current study aimed to create materials based on HAp, Hap-Ce, and Hap-Mg using hydrothermal maturation in the microwave field. This route has been considered a novel, promising, and effective way to obtain monodisperse, fine nanoparticles while easily controlling the synthesis parameters. The synthesized HAp powders were characterized morphologically and structurally by XRD diffraction, Dynamic light scattering, zeta potential, FTIR spectrometry, and SEM analysis. Proliferation and morphological analysis on osteoblast cell cultures were used to demonstrate the cytocompatibility of the produced biomaterials. The antimicrobial effect was highlighted in the synthesized samples, especially for hydroxyapatite substituted with cerium. Therefore, the samples of HAp substituted with cerium or magnesium are proposed as biomaterials with enhanced osseointegration, also having the capacity to reduce device-associated infections.

Synergistic Effects of Cerium and Hot Forging on Biodegradation, Antibacterial Properties, and In Vivo Biocompatibility of Microalloyed Mg-Zr-Sr Alloys

Biodegradable magnesium (Mg)-based alloys are potential candidates for orthopedic applications. In the present study, we have discussed the effect of cerium (Ce) addition and hot forging on mechanical properties, in vitro-in vivo corrosion, antibacterial activity, and cytocompatibility of microalloyed Mg-0.2Zr-0.1Sr-xCe (x = 0 [MZS], 0.5 wt % [MZS-Ce]) alloys. Addition of 0.5 wt % Ce to forged MZS alloys leads to strengthening of the basal texture as well as formation of a higher fraction of dynamic recrystallized (DRX) grains. Hot forging and addition of cerium to the MZS alloy improve both the yield strength and ultimate tensile strength of the forged MZS-Ce alloy by 1.39 and 1.21 times, respectively, compared to those of the forged MZS alloy. The potentiodynamic polarization test in Hank's solution indicates that the corrosion resistance of the forged MZS alloy improves with addition of 0.5 wt % Ce. Uniform distribution of Mg₁₂Ce precipitates, a higher DRX fraction, strengthened texture, and formation of a compact CeO₂ passive layer result in 1.68 times reduction in the immersion corrosion rate of the forged MZS-Ce alloy compared to that of the forged MZS alloy. Addition of Ce to the MZS alloy shows excellent antibacterial activity. The forged MZS-Ce alloy exhibited the highest antibacterial efficacy (76.73%). All the alloys show favorable cytocompatibility and alkaline phosphatase (ALP) activity with MC3T3-E1 cells. The improved corrosion resistance of the forged MZS-Ce alloy (95%) leads to higher cell viability compared to that of the forged MZS alloy (85%). In vivo biodegradation and the ability to generate new bones were analyzed by implanting cylindrical samples in the rabbit femur. Histological analysis showed no adverse effects around the implants. Gradual degradation of the implants and higher new bone formation around the forged MZS-Ce sample were confirmed by micro-CT analysis. Bone regeneration around the implants (58.21%) was validated by flurochrome labeling. After 60 days, the forged MZS-Ce alloy showed controlled corrosion and better bone-implant integration, presenting it as a potential candidate for internal fracture fixation materials.

Zinc/Cerium-Substituted Magnetite Nanoparticles for Biomedical Applications

Numerous studies have reported the possibility of enhancing the properties of materials by incorporating foreign elements within their crystal lattice. In this context, while magnetite has widely known properties that have been used for various biomedical applications, the introduction of other metals within its structure could prospectively enhance its effectiveness. Specifically, zinc and cerium have demonstrated their biomedical potential through significant antioxidant, anticancer, and antimicrobial features. Therefore, the aim of the present study was to develop a series of zinc and/or cerium-substituted magnetite nanoparticles that could further be used in the medical sector. The nanostructures were synthesized through the co-precipitation method and their morpho-structural characteristics were evaluated through X-ray diffraction (XRD), inductively coupled plasma mass spectrometry (ICP-MS), X-ray photoelectron spectroscopy (XPS), dynamic light scattering (DLS), zeta potential, scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX) analyses. Furthermore, the nanostructures were subjected to a ROS-Glo H2O2 assay for assessing their antioxidant potential, MTT assay for determining their anticancer effects, and antimicrobial testing against S. aureus, P. aeruginosa, and C. albicans strains. Results have proven promising for future biomedical applications, as the nanostructures inhibit oxidative stress in normal cells, with between two- and three-fold reduction and cell proliferation in tumor cells; a two-fold decrease in cell viability and microbial growth; an inhibition zone diameter of 4–6 mm and minimum inhibitory concentration (MIC) of 1–2 mg/mL.

Synthesis of Cerium Oxide Nanoparticles in a Bacterial Nanocellulose Matrix and the Study of Their Oxidizing and Reducing Properties

A soft synthesis of nanoceria with non-stoichiometric composition (33% Ce3+/67% Ce4+) named CeO2 NPs in bacterial cellulose (BC) matrix in the form of aerogel and hydrogel with controlled CeO2 NPs content was proposed. The advantage of CeO2 NPs synthesis in BC is the use of systemic antacid API–trisamine as a precursor, which did not destruct cellulose at room temperature and enabled a reduction in the duration of synthesis and the number of washes. Moreover, this method resulted in the subsequent uniform distribution of CeO2 NPs in the BC matrix due to cerium (III) nitrate sorption in the BC matrix. CeO2 NPs (0.1–50.0%) in the BC matrix had a fluorite structure with a size of 3–5 nm; the specific surface area of the composites was 233.728 m2/g. CeO2 NPs in the BC-CeO2 NPs composite demonstrated SOD-like activity in the processes of oxidation and reduction of cytochrome c (cyt c3+/cyt c2+), as well as epinephrine to inhibit its auto-oxidation in aqueous solutions by 33–63% relative to the control. In vitro experiments on rat blood showed a decrease in the MDA level and an increase in the activity of antioxidant defense enzymes–SOD by 24% and G6PDH by 2.0–2.5 times. Therefore, BC-CeO2 NPs can be proposed for wound healing as antioxidant material.

Ceria Nanoparticles Alleviated Osteoarthritis through Attenuating Senescence and Senescence-Associated Secretory Phenotype in Synoviocytes

Accumulation of senescent cells is the prominent risk factor for osteoarthritis (OA), accelerating the progression of OA through a senescence-associated secretory phenotype (SASP). Recent studies emphasized the existence of senescent synoviocytes in OA and the therapeutic effect of removing senescent synoviocytes. Ceria nanoparticles (CeNP) have exhibited therapeutic effects in multiple age-related diseases due to their unique capability of ROS scavenging. However, the role of CeNP in OA remains unknown. Our results revealed that CeNP could inhibit the expression of senescence and SASP biomarkers in multiple passaged and hydrogen-peroxide-treated synoviocytes by removing ROS. In vivo, the concentration of ROS in the synovial tissue was remarkably suppressed after the intra-articular injection of CeNP. Likewise, CeNP reduced the expression of senescence and SASP biomarkers as determined by immunohistochemistry analysis. The mechanistic study showed that CeNP inactivated the NFκB pathway in senescent synoviocytes. Finally, safranin O-fast green staining showed milder destruction of articular cartilage in the CeNP-treated group compared with the OA group. Overall, our study suggested that CeNP attenuated senescence and protected cartilage from degeneration via scavenging ROS and inactivating the NFκB signaling pathway. This study has potentially significant implications in the field of OA as it provides a novel strategy for OA treatment.

In Vitro Antimicrobial and Anticancer Peculiarities of Ytterbium and Cerium Co-Doped Zinc Oxide Nanoparticles

Zinc oxide nanoparticles (ZnO NPs) are a promising platform for their use in biomedical research, especially given their anticancer and antimicrobial activities. This work presents the synthesis of ZnO NPs doped with different amounts of rare-earth ions of ytterbium (Yb) and cerium (Ce) and the assessment of their anticancer and antimicrobial activities. The structural investigations indicated a hexagonal wurtzite structure for all prepared NPs. The particle size was reduced by raising the amount of Ce and Yb in ZnO. The anticancer capabilities of the samples were examined by the cell viability MTT assay. Post 48-h treatment showed a reduction in the cancer cell viability, which was x = 0.00 (68%), x = 0.01 (58.70%), x = 0.03 (80.94%) and x = 0.05 (64.91%), respectively. We found that samples doped with x = 0.01 and x = 0.05 of Yb and Ce showed a better inhibitory effect on HCT-116 cancer cells than unadded ZnO (x = 0.00). The IC50 for HCT-116 cells of Ce and Yb co-doped ZnO nanoparticles was calculated and the IC50 values were x = 0.01 (3.50 µg/mL), x = 0.05 (8.25 µg/mL), x = 0.00 (11.75 µg/mL), and x = 0.03 (21.50 µg/mL). The treatment-doped ZnO NPs caused apoptotic cell death in the HCT-116 cells. The nanoparticles showed inhibitory action on both C. albicans and E. coli. It can be concluded that doping ZnO NPs with Yb and Ce improves their apoptotic effects on cancer and microbial cells.

New antimicrobial materials with cerium ions in the composition of salts, solutions, and composite systems based on Ce3+(NO3)3 × 6H2O

The antimicrobial property against different bacteria with cerium oxide formation mainly depends on the content of Ce3+ ions.