Nickel Decorated on Phosphorous-Doped Carbon Nitride as an Efficient Photocatalyst for Reduction of Nitrobenzenes

Preparation and characterization of sulphur and zinc oxide Co-doped graphitic carbon nitride for photo-assisted removal of Safranin-O dye

Recently, there has been significant interest in photocatalytic reactions involving graphitic carbon nitride (g-C3N4) due to its sp2-hybridized carbon and nitrogen content and it is an ideal candidate for blending with other materials to enhance performance. Here, we have synthesized and analyzed both doped and undoped g-C3N4 nanoparticles. Specifically, we co-doped sulfur (S) into g-C3N4, integrated it with ZnO particles, and investigated the photocatalytic potential of these nanocomposites to remove Safranin-O dye. The initial step involved the preparation of pure g-C3N4 through calcination of urea. Subsequently, S-g-C3N4 was synthesized by calcining a mixture of urea and thiourea with a 3 : 1 ratio. Finally, the ZnO-S-g-C3N4 composite was synthesized using the liquid exfoliation technique, with distilled water serving as the exfoliating solvent. These samples were characterized by advanced techniques, including UV-Vis spectroscopy, Fourier-transform infrared spectroscopy (FTIR), X-ray Diffraction (XRD), energy dispersive X-ray (EDX) and scanning electron microscopy (SEM), to assess their crystallinity, morphology, optical properties, and phase purity. Subsequently, these nanocomposites were employed in catalytic and photocatalytic processes to remove the Safranin-O dye (SO). The results highlighted the formation of Z-scheme junction responsible for ZnO-S-g-C3N4's significant performance improvement. The comparison of results demonstrated that S-g-C3N4 and ZnO-S-g-C3N4 composites revealed an effective removal of Safranin-O dye in the presence of UV-light as compared to pure g-C3N4, as it was attributed to the phenomenon of improved separation of photogenerated charge carriers as a result of heterojunction formation between S-g-C3N4 and ZnO interfaces. In addition to improving photocatalytic performance, this study presents a facile route for producing ZnO-S-g-C3N4 composite with superior adsorption capabilities and selectivity.

Tetracycline removal from wastewater via g-C3N4 loaded RSM-CCD-optimised hybrid photocatalytic membrane reactor

In this study, a split-type photocatalytic membrane reactor (PMR), incorporating suspended graphitic carbon nitride (g-C3N4) as photocatalyst and a layered polymeric composite (using polyamide, polyethersulfone and polysulfone polymers) as a membrane was fabricated to remove tetracycline (TC) from aqueous solutions as the world's second most used and discharged antibiotic in wastewater. The photocatalyst was synthesised from melamine by ultrasonic-assisted thermal polymerisation method and, along with the membrane, was characterised using various methods, including Brunauer-Emmett-Teller analysis (BET), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), Field emission scanning electron microscopy (FESEM), and Ultraviolet-visible spectroscopy (UV-Vis). The PMR process was optimised, using Design-Expert software for tetracycline removal in terms of UV irradiation time, pH, photocatalyst loading, tetracycline concentration, and membrane separation iteration. It was revealed that a membrane-integrated reactor as a sustainable system could effectively produce clean water by simultaneous removal of tetracycline and photocatalyst from aqueous solution. The maximum removal of 94.8% was obtained at the tetracycline concentration of 22.16 ppm, pH of 9.78 with 0.56 g/L of photocatalyst in the irradiation time of 113.77 min after six times of passing membrane. The PMR system showed reasonable reusability by about a 25.8% drop in TC removal efficiency after seven cycles at optimal conditions. The outcomes demonstrate the promising performance of the proposed PMR system in tetracycline removal from water and suggest that it can be scaled as an effective approach for a sustainable supply of antibiotic-free clean water.

Helical magnetic micromotors decorated with nickel ferrocyanide for the active and rapid adsorption of radiocesium in water

Separating radioactive cesium from nuclear waste and contaminated environments is critical to mitigate radiological hazards. In response to this need, remote-controllable and Cs-selective micromotor adsorbents have been considered as a promising technology for rapid in-situ cleanup while minimizing secondary waste and radiation exposure to workers. In this study, we demonstrate the active and rapid removal of a radioactive contaminant from water by leveraging the magnetic manipulation capabilities of a helical and magnetic Ni micromotor coated with Cs-selective nickel ferrocyanide (NiFC). The use of polyvinyl alcohol fibers as a template enables the straightforward preparation of the helical wire structure, allowing for precise control over the diameter and pitch of the helix through simple twisting with Ni wires. By harnessing Ni2+ ions eluted from the Ni micromotor in an acid solution, we successfully fabricate NiFC-coated Ni (NiFC/Ni) micromotors that exhibit a selective removal efficiency greater than 98% for 137Cs, even in the presence of high concentrations of competing Na+ ions. Under the influence of an external magnetic field, the NiFC/Ni micromotor demonstrates rapid motion, achieving a pulling motion (100 body lengths per second) through a magnetic gradient and a tumbling motion (46 body lengths per second) induced by a rotating magnetic field. The tumbling motion of the NiFC/Ni micromotor substantially improves the Cs adsorption rate, resulting in a rate that surpasses that achieved under nonmoving conditions by a factor of 21. This improved adsorption rate highlights the considerable potential of magnetically manipulated micromotor self-propulsion for efficient water-pollution treatment.

Enhanced photocatalytic degradation of polycyclic aromatic hydrocarbon by graphitic carbonitride-nickel (g-C3N4-Ni) nanocomposite

The objective of the present study is to synthesize g-C3N4-Ni nanocomposites composed of graphitic carbon nitride and magnetic nickel nanoparticles for benzopyrene degradation, which is one of the most potent polycyclic aromatic hydrocarbons (PAH) molecules. The concocted g-C3N4-Ni nanocomposites contained confined nanospheres with a mean particle dimension of 22 nm. Batch adsorption studies revealed that a rise in adsorbent dosage elevates benzopyrene degradation percentage in both water and soil samples with respect to time. The increase in the benzopyrene concentration did not have much influence on the degradation efficiency, and hence, the minimal concentration of PAH molecule is essential for the effective adsorption by g-C3N4-Ni nanocomposites. The rise in pH tends to increase the degradation of Benzopyrene till 3 h of the incubation period, and beyond 3 h, the degradation percentage declines. With regard to the effect of light source, UV light has been shown to accelerate the degradation of benzopyrene by g-C3N4-Ni nanocomposites than sunlight. The adsorption kinetic and isotherm investigations have proven that the Pseudo-second order kinetic model and Freundlich isotherm model were appropriate for our study. Thus, the g-C3N4-Ni nanocomposites were found to be efficient as a photocatalyst for the adsorption of benzopyrene from environmental samples.

A highly efficient NiCo2O4 decorated g-C3N4 nanocomposite for screen-printed carbon electrode based electrochemical sensing and adsorptive removal of fast green dye

Herein, we demonstrate the preparation and application of NiCo2O4 decorated over a g-C3N4-based novel nanocomposite (NiCo2O4@g-C3N4). The prepared material was well characterized through several physicochemical techniques, including FT-IR, XRD, SEM, and TEM. The electrochemical characterizations via electrochemical impedance spectroscopy show the low electron transfer resistance of NiCo2O4@g-C3N4 owing to the successful incorporation of NiCo2O4 nanoparticles on the sheets of g-C3N4. NiCo2O4@g-C3N4 nanocomposite was employed in the fabrication of a screen-printed carbon electrode-based innovative electrochemical sensing platform and the adsorptive removal of a food dye, i.e., fast green FCF dye (FGD). The electrochemical oxidation of FGD at the developed NiCo2O4@g-C3N4 nanocomposite modified screen-printed carbon electrode (NiCo2O4@g-C3N4/SPCE) was observed at an oxidation potential of 0.65 V. A wide dual calibration range for electrochemical determination of FGD was successfully established at the prepared sensing platform, showing an excellent LOD of 0.13 µM and sensitivity of 0.6912 µA.µM-1.cm-2 through differential pulse voltammetry. Further, adsorbent dose, pH, contact time, and temperature were optimized to study the adsorption phenomena. The adsorption thermodynamics, isotherm, and kinetics were also investigated for efficient removal of FGD at NiCo2O4@g-C3N4-based adsorbents. The adsorption phenomenon of FGD on NiCo2O4@g-C3N4 was best fitted (R2 = 0.99) with the Langmuir and Henry model, and the corresponding value of Langmuir adsorption efficiency (qm) was 3.72 mg/g for the removal of FGD. The reaction kinetics for adsorption phenomenon were observed to be pseudo-second order. The sensitive analysis of FGD in a real sample was also studied.

Photocatalytic activity of TiO2-ZnO/g-C3N4 nanocomposites for methylene orange and Rhodamine B dyes removal from water and photocatalytic hydrogen generation

In this work, for the removal of azo dyes that cause environmental pollution, TiO2-ZnO has been modified with graphitic carbon nitride (g-C3N4) to form an advanced hetero-linked photocatalyst. With this catalyst, photocatalytic hydrogen production and photodegradation activity against methylene orange (MO) and rhodamineB (RhB) dye removal were studied. The synthesized nanostructure was extensively characterized by several techniques such as XRD, TEM, UV-Vis and fluorescence spectrophotometer (PL) techniques. According to the analysis, a significant increase in the photocatalytic efficiency of TiO2-ZnO was determined after it was modified with g-C3N4 nanostructures. The combination between TiO2-ZnO and g-C3N4 was shown to be responsible for the improvement in photocatalytic activity because it significantly decreased electron-hole recombination. After 90 min the 62.81% of MO dye was removed but at 120 min only 57% of RhB was degraded. In addition, the antibacterial activity of TiO2-ZnO/g-C3N4 catalyst was carried out against gram positive and gram negatif bacteria. The bacterial inhibition (%) of TiO2-ZnO/g-C3N4 catalyst.was found to be 44 % against E. coli and 33 % against at 100 μg/ml concentration. In line with the analyzes obtained with this study, important results have been revealed for the application of photocatalytic methods in more industrial dimensions in the production of hydrogen, which is a valuable energy type.

Preparation of high-crystalline and non-metal modified g-C3N4 for improving ultrasound-accelerated white-LED-light-driven photocatalytic performances

As a non-metallic organic semiconductor, graphitic carbon nitride (g-C3N4) has received much attention due to its unique physicochemical properties. However, the photocatalytic activity of this semiconductor faces challenges due to factors such as low electronic conductivity and limited active sites provided on its surface. The morphology and structure of g-C3N4, including macro/micro morphology, crystal structure and electronic structure can affect its catalytic activity. Non-metallic heteroatom doping is considered as an effective method to tune the optical, electronic and other physicochemical properties of g-C3N4. Here, we synthesized non-metal-doped highly crystalline g-C3N4 by one-pot calcination method, which enhanced the photocatalytic activity of g-C3N4 such as mesoporous nature, reduced band gap, wide-range photousability, improved charge carrier recombination, and the electrical conductivity was improved. Hence, the use of low-power white-LED-light illumination (λ ≥ 420 nm) and ultrasound (US) irradiation synergistically engendered the Methylene Blue (MB) mineralization efficiency elevated to 100% within 120 min by following the pseudo-first-order mechanism under the following condition (i.e., pH 11, 0.75 g L-1 of O-doped g-C3N4 and S-doped g-C3N4, 20 mg L-1 MB, 0.25 ml s-1 O2, and spontaneous raising temperature). In addition, the rapid removal of MB by sonophotocatalysis was 4 times higher than that of primary photocatalysis. And radical scavenging experiments showed that the maximum distribution of active species corresponds to superoxide radical [Formula: see text]. More importantly, the sonophotocatalytic degradation ability of O-doped g-C3N4 and S-doped g-C3N4 was remarkably sustained even after the sixth consecutive run.

Microwave Synthesis of Visible-Light-Activated g-C3N4/TiO2 Photocatalysts

The preparation of visible-light-driven photocatalysts has become highly appealing for environmental remediation through simple, fast and green chemical methods. The current study reports the synthesis and characterization of graphitic carbon nitride/titanium dioxide (g-C₃N₄/TiO₂) heterostructures through a fast (1 h) and simple microwave-assisted approach. Different g-C₃N₄ amounts mixed with TiO₂ (15, 30 and 45 wt. %) were investigated for the photocatalytic degradation of a recalcitrant azo dye (methyl orange (MO)) under solar simulating light. X-ray diffraction (XRD) revealed the anatase TiO₂ phase for the pure material and all heterostructures produced. Scanning electron microscopy (SEM) showed that by increasing the amount of g-C₃N₄ in the synthesis, large TiO₂ aggregates composed of irregularly shaped particles were disintegrated and resulted in smaller ones, composing a film that covered the g-C₃N₄ nanosheets. Scanning transmission electron microscopy (STEM) analyses confirmed the existence of an effective interface between a g-C₃N₄ nanosheet and a TiO₂ nanocrystal. X-ray photoelectron spectroscopy (XPS) evidenced no chemical alterations to both g-C₃N₄ and TiO₂ at the heterostructure. The visible-light absorption shift was indicated by the red shift in the absorption onset through the ultraviolet-visible (UV-VIS) absorption spectra. The 30 wt. % of g-C₃N₄/TiO₂ heterostructure showed the best photocatalytic performance, with a MO dye degradation of 85% in 4 h, corresponding to an enhanced efficiency of almost 2 and 10 times greater than that of pure TiO₂ and g-C₃N₄ nanosheets, respectively. Superoxide radical species were found to be the most active radical species in the MO photodegradation process. The creation of a type-II heterostructure is highly suggested due to the negligible participation of hydroxyl radical species in the photodegradation process. The superior photocatalytic activity was attributed to the synergy of g-C₃N₄ and TiO₂ materials.

Flower-Shaped CoS-Co2O3/G-C3N4 Nanocomposite for Two-Symmetric-Electrodes Supercapacitor of High Capacitance Efficiency Examined in Basic and Acidic Mediums

Graphitic carbon nitride (G-C3N4) was synthesized through the direct combustion of urea in the air. The CoS-Co₂O₃/G-C3N4 composite was synthesized via the hydrothermal method of G-C3N4 using cobalt salts. The morphological and chemical structures were determined through XRD, XPS, SEM, and TEM. XRD and XPS analyses confirmed the chemical structure, function groups, and elements percentage of the prepared nanocomposite. SEM measurements illustrated the formation of G-C3N4 sheets, as well as the flower shape of the CoS-Co₂O₃/G-C3N4 composite, evidenced through the formation of nano appendages over G-C3N4 sheets. TEM confirmed the 2D nanosheets of G-C3N4 with an average width and length of 80 nm and 170 nm, respectively. Two symmetric electrodes for the supercapacitor from the CoS-Co₂O₃/G-C3N4 composite. Electrochemical measurements were carried out to determine the charge/discharge, cyclic voltammetry, stability, and impedance of the prepared supercapacitor. The measurements were carried out under acid (0.5 M HCL) and basic (6.0 M NaOH) mediums. The charge and discharge lifetime values in the acid and base medium were 85 and 456 s, respectively. The cyclic voltammetry behavior was rectangular in a base medium for the pseudocapacitance feature. The supercapacitor had 100% stability retention up to 600 cycles; then, the stability decreased to 98.5% after 1000 cycles. The supercapacitor displayed a specific capacitance (C_S) of 361 and 92 F/g, and an energy density equal to 28.7 and 30.2 W h kg^-1 in the basic and acidic mediums, respectively. Our findings demonstrate the capabilities of supercapacitors to become an alternative solution to batteries, owing to their easy and low-cost manufacturing technique.

Alkallas F, M. Ahmed A, Rabia M. Petal-like NiS-NiO/G-C3N4 Nanocomposite for High-Performance Symmetric Supercapacitor

Graphitic carbon nitride (G-C3N4) and NiS-NiO/G-C3N4 nanocomposite have been synthesized via combustion and hydrothermal techniques, respectively. The chemical and morphological properties of these materials were confirmed using different analytical methods. SEM confirms the formation of G-C3N4 sheets containing additional petal-like shapes of NiS-NiO nanoparticles. The electrochemical testing of NiS-NiO/G-C3N4 symmetric supercapacitors is carried out from 0.6 M HCl electrolyte. Such testing includes charge/discharge, cyclic voltammetry, impedance, and supercapacitor stability. The charge/discharge time reaches 790 s at 0.3 A/g, while the cyclic voltammetry curve forms under a high surface area. The produced specific capacitance (C_S) and energy density values are 766 F/g and 23.55 W.h.kg^-1, correspondingly.

Fabrication of an innovative electrochemical sensor based on graphene-coated silver nanoparticles decorated over graphitic carbon nitride for efficient determination of estradiol

Monitoring small amount of endocrine disrupting chemical, estradiol (E2) residue in environmental and biological samples is extremely important because of its possible connections to breast and prostate malignancies and gastrointestinal disorders. The newly synthesized graphene-coated silver nanoparticles (GN@Ag) decorated on graphitic carbon nitride (g-C3N4)-based hybrid nanomaterial (GN@Ag/g-C3N4) was used to modify glassy carbon electrode (GCE) for electroanalytical measurement of E2. The GN@Ag/g-C3N4 nanocomposite prepared through ultrasonic-assisted reflux methodology was characterized using various physicochemical methods. The scanning electron microscopy and transmission electron microscopy have shown that GN@Ag nanoparticles were decorated and randomly dispersed over g-C3N4 sheets. The exceptional electrochemical response towards the oxidation of E2 was observed through cyclic voltammetry due to the quick electron transfer ability and superior conductivity of GN@Ag/g-C3N4/GCE. The detection limit was found to be 0.002 μM with wide linear range of E2 concentration (0.005-8.0 μM) along with remarkable stability of the fabricated electrode for 21 days showing 91% retention in initial current. The kinetic parameters such as catalytic rate constant and diffusion coefficient for E2 were estimated to be 1.1 × 105 M-1 s-1 and 1.9 × 10-4 cm2 s-1, respectively, by employing chronoamperometry. The proposed sensor also demonstrated its practical applicability for E2 determination in environmental and biological samples with a recovery range of 95-104%. Furthermore, the developed sensing platform is much better compared to reported methods in terms of simplicity, accuracy, detection limit, linearity range, and usefulness in real sample for E2 sensing.

A novel nanocomposite (g-C3N4/Fe3O4@P2W15V3) with dual function in organic dyes degradation and cysteine sensing

Among the important needs of human societies is the elimination of environmental pollution and also the construction of high-performance and inexpensive biosensors. In this regard, the construction of multi-functional composites has been considered. A novel magnetic graphite carbon nitride decorated by tri-vanadium substituted Dawson-type heteropolytungstate nanocomposite (C₃N₄/Fe₃O₄@P₂W₁₅V₃) effectively synthesized and characterized by prevalent functional analysis. The prepared nano-catalyst presents bi-functional usage involving photocatalytic removal of dyes (methylene blue, congo red and phenyl red) (around 98%) under visible light radiation and greatly sensitive colorimetric sensing of cysteine in an aqueous media. Moreover, synthesized nano-catalyst successfully recovered five times without any considerable deficiency on its photocatalytic ability. Further, Moreover, we propose a novel method for cysteine detection based on the C₃N₄/Fe₃O₄@P₂W₁₅V₃ nanocomposite. This nanocomposite displayed a privileged catalytic feature for cysteine oxidation to extend a clock reaction of methylene blue as an indicator in the presence of NaBH₄ in acidic solution. More importantly, this colorimetric sensing method of cysteine presents an easy, low-cost, selective, and rapid colorimetric assay with a detection limit value of 7.2 μM in the acceptable linear range of 5-600 μM.

Biomimetic Synthesis of PANI/Graphitic Oxidized Carbon Nitride for Supercapacitor Applications

Polyaniline (PANI) composites have gained momentum as supercapacitive materials due to their high energy density and power density. However, some drawbacks in their performance remain, such as the low stability after hundreds of charge-discharge cycles and limitations in the synthesis scalability. Herein, we report for the first time PANI-Graphitic oxidized carbon nitride composites as potential supercapacitor material. The biomimetic polymerization of aniline assisted by hematin, supported by phosphorous and oxygen-modified carbon nitrides (g-POCN and g-OCN, respectively), achieved up to 89% yield. The obtained PAI/g-POCN and PANI/g-OCN show enhanced electrochemical properties, such as conductivity of up to 0.0375 S/cm, specific capacitances (C_s) of up to 294 F/g (at high current densities, 5 A/g) and a stable operation after 500 charge-discharge cycles (at 3 A/g). In contrast, the biomimetic synthesis of Free PANI, assisted by stabilized hematin in cosolvents, exhibited lower performance properties (65%). Due to their structural differences, the electrochemical properties of Free PANI (conductivity of 0.0045 S/cm and C_s of up to 82 F/g at 5 A/g) were lower than those of nanostructured PANI/g-POCN and g-OCN supports, which provide stability and improve the properties of biomimetically synthesized PANI. This work reveals the biomimetic synthesis of PANI, assisted by hematin supported by modified carbon nitrides, as a promising strategy to produce nanostructured supercapacitors with high performance.

Mechanochemical bottom-up synthesis of phosphorus-linked, heptazine-based carbon nitrides using sodium phosphide

Herein, we present the bottom-up, mechanochemical synthesis of phosphorus-bridged heptazine-based carbon nitrides (g-h-PCN). The structure of these materials was determined through a combination of powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), 31P magic angle spinning nuclear magnetic resonance (MAS NMR), density functional theory (DFT) and electron energy loss spectroscopy (EELS). Compared to traditional furnace-based techniques, the presented method utilizes milder conditions, as well as shorter reaction times. Both samples of g-h-PCN directly after milling and aging and after an hour of annealing at 300 °C (g-h-PCN300) show a reduction in photoluminescent recombination, as well as a nearly two-time increase in photocurrent under broad spectrum irradiation, which are appealing properties for photocatalysis.

De novo synthesis of photocatalytic bifunctional MIL-125(Ti)/gC3N4/RGO through sequential self-assembly and solvothermal route

In this study we have synthesized a heterostructured metal organic framework (MOF) consisting of self-assembled porous carbon nitride (gC₃N₄) and, reduced graphene oxide (RGO) with MIL-125(Ti) (CN-GO-MIL) through a simple synthesis route. As-synthesized CN-GO-MIL was characterized to determine its morphological, surface, structural, and optical properties. The synthesis produced a porous nanomaterial with efficient visible light capture and electron transport. CN-GO-MIL proved 2.23 and 1.23 times as effective as bare MIL-125(Ti) for Rhodamine B (RhB) degradation and chromium (Cr) reduction, respectively. We propose a governing photocatalytic degradation and reduction mechanism in which superoxide plays a major role in the photocatalytic degradation, followed by O₂¹, OH·, and holes, and identify methanol as a suitable hole scavenger for reduction of Cr. Moreover, Cr reduction can be best achieved at pH 2 in the presence of methanol. Performance of material in terms of apparent quantum yield (AQY), figure of merit (FOM), and catalyst surface efficiency (S.E), suggests 5% CN-GO-MIL is an efficient photocatalyst for degradation of RhB. Comparison of the AQY with previously reported MOF-based composites shows that the as synthesized 5% CN-GO-MIL can be regarded as one of best performing photocatalyst under visible light irradiation for abatement of organic and inorganic pollution.

Light-assisted coupling of phenols with CO2 to 2-hydroxybenzaldehydes catalyzed by a g-C3N4/NH2-MIL-101(Fe) composite

The present work described a novel photocatalytic approach for the synthesis of 2-hydroxybenzaldehydes from the coupling of phenols and CO2 in the presence of a base using a graphitic carbon nitride/NH2-MIL-101(Fe) composite under mild conditions.

Graphitic carbon nitride supported neodymium oxide as an efficient recyclable nanocatalyst for the one-pot synthesis of diazabenzo[a]anthraceneones

In this research, a neodymium oxide@graphitic-carbon nitride nanocomposite was prepared and used as an efficient catalyst for the synthesis of some diazabenzo[a]anthraceneones under solvent-free conditions. The characterization of the Nd₂O₃@g-C₃N₄ nanocomposite was carried out by Fourier transform infrared spectroscopy (FT-IR), powder X-ray diffraction (XRD), energy dispersive spectroscopy (EDS), field emission scanning electron microscopy (FE-SEM) and thermo-gravimetric analysis (TGA). The as-prepared compound was used as a catalyst for the one-pot three-component reaction of 2-naphthol, different substituted aromatic aldehydes, barbituric acid and its derivatives under solvent-free conditions. The catalyst is highly efficient, stable, separable, and recyclable and provides the corresponding diazabenzo[a]anthraceneones in good to high yields. This method provides several advantages such as mild reaction conditions, operational simplicity, low cost, safety, easy work up procedures and purification of products, low catalyst loading and reusability of the catalyst.

Fabrication of electrochemical immunosensor based on GCN-β-CD/Au nanocomposite for the monitoring of vitamin D deficiency

Serum 25-hydroxyvitamin D (25(OH)D) has been clinically considered as a novel biomarker for vitamin D deficiency. The current standard technologies for the detection of 25(OH)D are performed in sophisticated laboratories exhibiting the practical limitations for onsite and affordable testing. Therefore, the development of a cost-effective device for Vitamin D is extremely necessary to provide an earlier diagnosis. Herein, for the first time, we propose a novel label-free impedimetric immunosensor for the detection and quantification of 25-hydroxyvitamin D₃ (25(OH)D₃) biomarker in serum samples based on the Au nanoparticles functionalized GCN-β-CD nanocomposite. To fabricate the sensing probe, Ab-25(OH)D₃ antibodies were covalently immobilized on GCN-β-CD@Au/GCE using carbodiimide chemistry. The surface morphology and structural properties of constructed immunosensor were confirmed by different analytical techniques. Electrochemical impedance spectroscopy technique (EIS) has been selected as the main detection method to measure the Antibody (Ab) and Antigen (Ag) interaction at the immunosensor surface because it is label-free, less destructive to the activities of the biomolecule, and highly sensitive. The as-prepared immunosensor exhibited an excellent concentration range from 0.1 ng/ml to 500 ng/ml with the lowest limit of detection of 0.01 ng/ml. Furthermore, the sensing probe was validated in serum samples and obtained results were compared with the standard CLIA technique. The results have revealed that the sensing probe could be used for clinical diagnosis of Vitamin D deficiency in the clinical laboratories.

Effective and reliable platform for nonenzymatic nanomolar-range quinol detection in water samples using ceria doped polypyrrole nanocomposite embedded on graphitic carbon nitride nanosheets

A glassy carbon electrode modification by a novel ternary nanocomposite of advantageously united ceria, polypyrrole, and graphitic carbon nitride (CeO₂/Ppy@g-C₃N₄) is reported here. It can be used to tailor the sensor surface for the electrochemical detection of nanomolar-level quinol (Qnl), a chemical widely used as a developing agent in photography and lithography, as a cosmetic, and as an antioxidant in rubber and food industries. The occupational exposure of Qnl may occur by inhalation or dermal contact, leading to lot of health hazards. The synthesized nanocomposite was characterized by various analytical techniques such as UV-Vis, Fourier transformed infrared (FTIR), X-ray powder diffraction, field emission scanning electron microscopy, high-resolution transmission electron microscopy, Raman, thermogravimetric analysis, energy-dispersive X-ray spectroscopy, selected area electron diffraction, and elemental mapping analyses. The oxidation current of Qnl is linear to its concentration in the range of 0.01-260 μM and the lowest detection and quantification limit are found to be 1.5 nM and 0.004 μM, respectively, with a sensitivity of 283.33 μA mM^-1 cm^-2. The performance of the modified electrode was compared with those of high-performance liquid chromatography, which indicates that the proposed sensor can be used as an effective and reliable platform for nano-molar detection of Qnl in various environmental and biological fluids.

Vanadium-doped graphitic carbon nitride for multifunctional applications: Photoelectrochemical water splitting and antibacterial activities

Bulk graphitic carbon nitride (g-C3N4) exhibits limited water splitting efficiency due todrawbacks including high charge recombination rate, low electrical conductivity, poor quantum efficiency, and few adsorption and active catalytic sites. Herein, we report V-doped g-C3N4 nanoarchitectures prepared via direct calcination of urea and ammonium metavanadate. The obtained V-doped g-C3N4 nanostructures not only improved the visible light absorption property but also increased the charge separation and transportation, resulting in extremely enhanced water splitting activity. The structural, morphological, and optical analysis results confirmed the successful incorporation of V into the host g-C3N4 material, and electrochemical impedance spectroscopy measurements revealed the charge carrier dynamics. Compared to the pristine g-C3N4 photoelectrode, the optimized 0.3 mol% V-doped g-C3N4 photoelectrode showed a considerably higher photocurrent density (0.80 mA cm-2). The enhancement of the catalytic performance could be attributed to the synergistic effects of prolonged light absorption, improved transfer of electrons and holes, and extra active catalytic sites for water splitting. Further, the optimized 0.3 mol% V-doped g-C3N4 sample showed an antibacterial activity higher than that of the undoped photocatalyst.

Highly efficient conversion of the nitroarenes to amines at the interface of a ternary hybrid containing silver nanoparticles doped reduced graphene oxide/ graphitic carbon nitride under visible light

In this report, a ternary Ag-rGO/g-C₃N₄ hybrid was synthesized by a simple hydrothermal approach for the photocatalytic reduction of nitroarene compounds into their corresponding amines under visible light. Importantly, the present method did not require reducing agents, like hydrazine hydrate; instead methanol has been used as a source of electrons and protons for the photoreduction process. After grafting of Ag NPs, a significant enhancement in the efficiency of the rGO/g-C₃N₄ for the reduction of nitrobenzenes was observed. Under optimized experimental conditions, the conversion of nitrobenzene and yield of aniline were determined to be 99% and 98%, respectively under visible light illumination for 4 h. The nitrobenzene compounds bearing both electron donating and withdrawing groups were selectively converted into their corresponding aniline products without altering the functionality. The enhanced performance of the developed photocatalyst attributed to the effective separation of photoexcited electrons on the photocatalyst surface and their subsequent transfer for the reduction of nitrobenzene molecules.

Electrochemical detection of thiamethoxam in food samples based on Co3O4 Nanoparticle@Graphitic carbon nitride composite

Thiamethoxam is a class of neonicotinoid insecticide widely used in agriculture. Due to their high water solubility, thiamethoxam can be transported to surface waters and have the potential to be toxic to human life. Herein, a simple and robust method is presented for the detection of thiamethoxam based on hydrothermally synthesized nanoparticles of cobalt oxide into the graphitic carbon nitride composite (Co₃O₄@g-C₃N₄ NC). The materials were well characterized by XRD, FT-IR, XPS, FESEM, HRTEM, EDX, and UV-vis which provide crystalline nature, structure, and composition. The impedance measurement shows an intimate electrode/electrolyte interface by casting Co₃O₄@g-C₃N₄ onto a screen-printed carbon electrode (SPCE), delivering an interfacial resistance as low as 12.5 Ωcm². The cyclic voltammetry and differential pulse voltammetry measurements exhibit the nanocomposite as a superior electrocatalyst for the electrochemical detection of thiamethoxam and achieved a low detection limit of 4.9 nM with a wide linear range of 0.01-420 μM. The present work also demonstrates a promising strategy for electrochemical detection of thiamethoxam in real samples such as potato and brown rice.

Supramolecularly Bonded Layered Heterostructures Exhibiting HER Activity

van der Waals heterostructures formed by 2D materials have attracted much attention in the last few years. Recently, 2D nanosheets linked by covalent bonds have been found to exhibit novel properties. In the present study we have investigated supramolecular layered heterostructures formed by nanosheets of MoS₂ with BC₇ N, g-C₃ N₄ and graphene. These materials have been synthesized via a non-covalent host-guest synthetic design using cucurbit[8]uril (CB[8]) hosts. In addition to offering reversible disassembly, these heterostructures show good visible-light-driven hydrogen evolution reaction (HER) activity as well as reasonable gas adsorption and other properties.

Fabrication of a magnetic metal–organic framework molecularly imprinted polymer for extraction of anti-malaria agent hydroxychloroquine

A new magnetic metal–organic framework molecularly imprinted polymer was synthesized by the sol–gel method for the determination of hydroxychloroquine sulfate.

The recent development of efficient Earth-abundant transition-metal nanocatalysts

Whereas noble metal compounds have long been central in catalysis, Earth-abundant metal-based catalysts have in the same time remained undeveloped. Yet the efficacy of Earth-abundant metal catalysts was already shown at the very beginning of the 20th century with the Fe-catalyzed Haber-Bosch process of ammonia synthesis and later in the Fischer-Tropsch reaction. Nanoscience has revolutionized the world of catalysis since it was observed that very small Au nanoparticles (NPs) and other noble metal NPs are extraordinarily efficient. Therefore the development of Earth-abundant metals NPs is more recent, but it has appeared necessary due to their "greenness". This review highlights catalysis by NPs of Earth-abundant transition metals that include Mn, Fe, Co, Ni, Cu, early transition metals (Ti, V, Cr, Zr, Nb and W) and their nanocomposites with emphasis on basic principles and literature reported during the last 5 years. A very large spectrum of catalytic reactions has been successfully disclosed, and catalysis has been examined for each metal starting with zero-valent metal NPs followed by oxides and other nanocomposites. The last section highlights the catalytic activities of bi- and trimetallic NPs. Indeed this later family is very promising and simultaneously benefits from increased stability, efficiency and selectivity, compared to monometallic NPs, due to synergistic substrate activation.

Photocatalysis in organic and polymer synthesis

This review, with over 600 references, summarizes the recent applications of photoredox catalysis for organic transformation and polymer synthesis. Photoredox catalysts are metallo- or organo-compounds capable of absorbing visible light, resulting in an excited state species. This excited state species can donate or accept an electron from other substrates to mediate redox reactions at ambient temperature with high atom efficiency. These catalysts have been successfully implemented for the discovery of novel organic reactions and synthesis of added-value chemicals with an excellent control of selectivity and stereo-regularity. More recently, such catalysts have been implemented by polymer chemists to post-modify polymers in high yields, as well as to effectively catalyze reversible deactivation radical polymerizations and living polymerizations. These catalysts create new approaches for advanced organic transformation and polymer synthesis. The objective of this review is to give an overview of this emerging field to organic and polymer chemists as well as materials scientists.

Efficient Catalysis of Hydrogen Evolution Reaction from WS2(1-x) P2x Nanoribbons

The rational design of Earth abundant electrocatalysts for efficiently catalyzing hydrogen evolution reaction (HER) is believed to lead to the generation of carbon neutral energy carrier. Owing to their fascinating chemical and physical properties, transition metal dichalcogenides (TMDs) are widely studied for this purpose. Of particular note is that doping by foreign atom can bring the advent of electronic perturbation, which affects the intrinsic catalytic property. Hence, through doping, the catalytic activity of such materials could be boosted. A rational synthesis approach that enables phosphorous atom to be doped into WS₂ without inducing phase impurity to form WS_2(1-x) P_2x nanoribbon (NRs) is herein reported. It is found that the WS_2(1-x) P_2x NRs exhibit considerably enhanced HER performance, requiring only -98 mV versus reversible hydrogen electrode to achieve a current density of -10 mA cm^-2 . Such a high performance can be attributed to the ease of H-atom adsorption and desorption due to intrinsically tuned WS₂ , and partial formation of NRs, a morphology wherein the exposure of active edges is more pronounced. This finding can provide a fertile ground for subsequent works aiming at tuning intrinsic catalytic activity of TMDs.

The recent development of efficient Earth-abundant transition-metal nanocatalysts

This review presents the recent remarkable developments of efficient Earth-abundant transition-metal nanocatalysts.

Nanoparticles for Catalysis

Nanoscience emerged in the last decades of the 20th century with the general aim to determine those properties that appear when small particles of nanometric dimensions are prepared and stabilized.[...].

Enhanced Activity of Supported Ni Catalysts Promoted by Pt for Rapid Reduction of Aromatic Nitro Compounds

To improve the activities of non-noble metal catalysts is highly desirable and valuable to the reduced use of noble metal resources. In this work, the supported nickel (Ni) and nickel-platinum (NiPt) nanocatalysts were derived from a layered double hydroxide/carbon composite precursor. The catalysts were characterized and the role of Pt was analysed using X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM), energy dispersive X-ray spectroscopy (EDS) mapping, and X-ray photoelectron spectroscopy (XPS) techniques. The Ni²⁺ was reduced to metallic Ni⁰ via a self-reduction way utilizing the carbon as a reducing agent. The average sizes of the Ni particles in the NiPt catalysts were smaller than that in the supported Ni catalyst. The electronic structure of Ni was affected by the incorporation of Pt. The optimal NiPt catalysts exhibited remarkably improved activity toward the reduction of nitrophenol, which has an apparent rate constant (K_a) of 18.82 × 10⁻³ s⁻¹, 6.2 times larger than that of Ni catalyst and also larger than most of the reported values of noble-metal and bimetallic catalysts. The enhanced activity could be ascribed to the modification to the electronic structure of Ni by Pt and the effect of exposed crystal planes.

Flow hydrogenation of p-nitrophenol with nano-Ag/Al2O3

Herein, we report the first continuous-flow hydrogenation of p-nitrophenol to p-aminophenol with molecular hydrogen, as a reducting agent.