Inhalable Dry Powder of Bedaquiline for Pulmonary Tuberculosis: In Vitro Physicochemical Characterization, Antimicrobial Activity and Safety Studies

Development and Characterization of Spray-Dried Combined Levofloxacin-Ambroxol Dry Powder Inhaler Formulation

Background: This study explores the development and characterization of spray-dried composite microparticles consisting of levofloxacin (LVX, a broad-spectrum antibiotic), and ambroxol (AMB, a mucolytic agent that has antibacterial and antibiofilm properties), for the intended application of the drug against lower respiratory tract infections (LRTIs). Methods: A range of LVX to AMB mass ratios (1:1, 1:0.5, and 1:0.25) were prepared, with and without the use of the dispersibility enhancer leucine (LEU), and spray-dried following pre-optimized parameters to achieve the required particle size (1-5 µm) and flow properties. The formulations were characterized by attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy, scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), and a thermogravimetric analysis (TGA). The in vitro aerosolization performance of the new formulation was evaluated with a twin-stage impinger (TSI) at a flow rate of 60 ± 5 L/min. Using a validated RP-HPLC method, LVX and AMB were quantitatively determined. Results: The combined spray-dried LVX, AMB, and LEU particles were spherically shaped with sizes ranging from 1.9 to 2.9 µm, thus complying with the size requirements for effective deep lung deposition. The dispersibility enhancer leucine produced a high yield and enhanced the flow properties and aerosolization characteristics of the spray-dried formulations. The LVX to AMB mass ratios showed a remarkable impact on the aerosolization properties, with the LVX to AMB 1:1 mass ratio demonstrating the best flow and FPFs for both drugs. There must be a balanced ratio of these components for spray drying the composite particles to obtain composite particles of the required size and with the appropriate flow property. The addition of 5% of LEU significantly (p < 0.005) improved the FPF of all the formulations, probably by enhancing the surface hydrophobicity of the composite particles. Conclusions: The spray-dried combined antibiotics formulation has a strong potential for efficient lung delivery intended for the management of LRTIs.

Development of bedaquiline nanoemulsions intended for paediatric multidrug-resistant tuberculosis: excipient selection and preformulation studies

Preformulation investigations into the development of drug formulations, encompassing considerations related to the structure of the drug, excipients, composition, and physical attributes are crucial. This phase is pivotal in ensuring the ultimate success of nanoemulsion development. The objective of this study was to evaluate and define the properties of bedaquiline (BDQ) and the necessary excipients for the formulation of self-emulsifying BDQ-loaded nanoemulsions. To determine the saturation solubility of BDQ in various oils, an in-house validated HPLC method was used. Fourier transform infrared spectroscopy was utilised to identify and evaluate the compatibility between BDQ and the selected excipients. The water titration method was used to construct phase diagrams to identify the type of structure that resulted following emulsification and to characterise the behaviour of mixtures along dilution paths. The solubility studies revealed that BDQ exhibited the highest solubility in olive oil, with a solubility of 3.45 ± 0.041 mg/ml. The design space led to the formation of emulsions categorised as Winsor products. Importantly, the FTIR data indicated the absence of any potential interactions between BDQ and the chosen excipients. The preformulation studies were successful and facilitated the selection of compatible and suitable excipients for the formulation of BDQ-loaded nanoemulsions.

Formulation development, characterization, and evaluation of bedaquiline fumarate - Soluplus® - solid dispersion

Bedaquiline fumarate (BQF) is classified as a BCS class II drug and has poor water solubility and dissolution rate, which ultimately compromises bioavailability. The objective of this study is to improve the biopharmaceutical properties of BQF through a solid dispersion system by using Soluplus®. Two solid dispersion systems were prepared i.e. binary solid dispersion (BSD) and ternary solid dispersion (TSD) where 14.31-fold and 20.43-fold increase in solubility of BQF was observed with BSD and TSD in comparison to BQF. In our previous research work, we explored the BSD and TSD of BQF with a crystalline polymer, poloxamer 188, which showed an increment in the solubility of BQF. In the current research, amorphous Soluplus® polymer was selected to formulate BSD and TSD with BQF and showed higher solubility than poloxamer 188. The various solid and liquid state characterization results confirmed the presence of an amorphous form of BQF inside solid dispersion. The Fourier transform infrared spectroscopy showed no chemical interactions between BQF and polymer. The cellular uptake results demonstrated higher uptake in Caco-2 cell lines. Pharmacokinetic studies showed enhanced solubility and bioavailability of TSDs. Hence, the present research shows a promising formulation strategy for enhancing the biopharmaceutical performance of BQF by increasing its solubility.

Co-spray dried inhalable composite powders of ciprofloxacin and alginate oligosaccharide as anti-biofilm therapy

The treatment of chronic respiratory infections caused by biofilm formation are extremely challenging owing to poor drug penetration into the complex biofilm structure and high drug resistance. Local delivery of an antibiotic together with a non-antibiotic adjuvant to the lungs could often enhance the therapeutic responses by targeting different bacterial growth pathways and minimizing drug resistance. In this study, we designed new inhalable dry powders containing ciprofloxacin (CIP) and OligoG (Oli, a low-molecular-weight alginate oligosaccharide impairing the mucoid biofilms by interacting with their cationic ions) to combat respiratory bacterial biofilm infections. The resulting powders were characterized with respect to their morphology, solid-state property, surface chemistry, moisture sorption behavior, and dissolution rate. The aerosol performance and storage stability of the dry powders were also evaluated. The results showed that inhalable dry powders composed of CIP and Oli could be readily accomplished via the wet milling and spray drying process. Upon the storage under 20 ± 2 °C/20 ± 2 % relative humidity (RH) for one month, there was no significant change in the in vitro aerosol performances of the dry powders. In contrast, the dry powders became non-inhalable following the storage at 20 ± 2 °C/53 ± 2 % RH for one month due to the hygroscopic nature of Oli, which could be largely prevented by incorporation of leucine. Collectively, this study suggests that the newly developed co-spray-dried powders composed of CIP and Oli might represent a promising and alternative treatment strategy against respiratory bacterial biofilm infections.

Excipients for Novel Inhaled Dosage Forms: An Overview

Pulmonary drug delivery is a form of local targeting to the lungs in patients with respiratory disorders like cystic fibrosis, pulmonary arterial hypertension (PAH), asthma, chronic pulmonary infections, and lung cancer. In addition, noninvasive pulmonary delivery also presents an attractive alternative to systemically administered therapeutics, not only for localized respiratory disorders but also for systemic absorption. Pulmonary delivery offers the advantages of a relatively low dose, low incidence of systemic side effects, and rapid onset of action for some drugs compared to other systemic administration routes. While promising, inhaled delivery of therapeutics is often complex owing to factors encompassing mechanical barriers, chemical barriers, selection of inhalation device, and limited choice of dosage form excipients. There are very few excipients that are approved by the FDA for use in developing inhaled drug products. Depending upon the dosage form, and inhalation devices such as pMDIs, DPIs, and nebulizers, different excipients can be used to provide physical and chemical stability and to deliver the dose efficiently to the lungs. This review article focuses on discussing a variety of excipients that have been used in novel inhaled dosage forms as well as inhalation devices.

Repurposing ebselen as an inhalable dry powder to treat respiratory tract infections

Respiratory tract infections (RTIs) are one of the leading causes of death globally, lately exacerbated by the increasing prevalence of antimicrobial resistance. While antimicrobial resistance could be overcome by developing new antimicrobial agents, the use of a safe repurposed agent having potent antimicrobial activity against various RTIs can be an efficient and cost-effective alternative to overcome the long and complex process of developing and testing new drugs. Ebselen, a synthetic organoselenium drug originally developed to treat noise-inducing hearing problems, has shown promising antimicrobial activity in vitro against several respiratory pathogens including viruses (e.g., SARS-CoV-2, influenza A virus) and bacteria (e.g., Mycobacterium tuberculosis, Streptococcus pneumoniae, and Staphylococcus aureus). Inhaled drug delivery is considered a promising approach for treating RTIs, as it can ensure effective drug concentrations at a lower dose, thereby minimizing the side effects that are often encountered by using oral or injectable drugs. In this study, we developed inhalable ebselen dry powder formulations using a spray-drying technique. The amino acids leucine, methionine, and tryptophan were incorporated with ebselen to enhance the yield and aerosolization of the dry powders. The amino acid-containing ebselen dry powders showed a better yield (37-56.4 %) than the amino acid-free formulation (30.9 %). All dry powders were crystalline in nature. The mass median aerodynamic diameter (MMAD) was less than 5 µm for amino acids containing dry powders (3-4 µm) and slightly higher (5.4 µm) for amino acid free dry powder indicating their suitability for inhalation. The aerosol performance was higher when amino acids were used, and the leucine-containing ebselen dry powder showed the highest emitted dose (84 %) and fine particle fraction (68 %). All amino acid formulations had similar cytotoxicity as raw ebselen, tested in respiratory cell line (A549 cells), with half-maximal inhibitory concentrations (IC50) between 100 and 250 μg/mL. Raw ebselen and amino acid-containing dry powders showed similar potent antibacterial activity against the Gram-positive bacteria S. aureus and S. pneumoniae with minimum inhibitory concentrations of 0.31 μg/mL and 0.16 μg/mL, respectively. On the other hand, raw ebselen and the formulations showed limited antimicrobial activity against the Gram-negative pathogens Pseudomonas aeruginosa and Klebsiella pneumoniae. In summary, in this study we were able to develop amino-acid-containing inhalable dry powders of ebselen that could be used against different respiratory pathogens, especially Gram-positive bacteria, which could ensure more drug deposition in the respiratory tract, including the lungs. DPIs are generally used to treat lung (lower respiratory tract) diseases. However, DPIs can also be used to treat both upper and lower RTIs. The deposition of the dry powder in the respiratory tract is dependent on its physicochemical properties and this properties can be modulated to target the intended site of infection (upper and/or lower respiratory tract). Further studies will allow the development of similar formulations of individual and/or combination of antimicrobials that could be used to inhibit a number of respiratory pathogens.

The quest to deliver high-dose rifampicin: can the inhaled approach help?

INTRODUCTION

Tuberculosis (TB) is a global health problem that poses a challenge to global treatment programs. Rifampicin is a potent and highly effective drug for TB treatment; however, higher oral doses than the standard dose (10 mg/kg/day) rifampicin may offer better efficacy in TB treatment.

AREAS COVERED

High oral dose rifampicin is not implemented in anti-TB regimens yet and requires about a 3-fold increase in dose for increased efficacy. We discuss inhaled delivery of rifampicin as an alternative or adjunct to oral high-dose rifampicin. Clinical results of safety, tolerability, and patient compliance with antibiotic dry powder inhalers are reviewed.

EXPERT OPINION

Clinical trials suggest that an approximately 3-fold increase in the standard oral dose of rifampicin may be required for better clinical outcomes. On the other hand, animal studies suggest that inhaled rifampicin can deliver a high concentration of the drug to the lungs and achieve approximately double the plasma concentration than that from oral rifampicin. Clinical trials on inhaled antibiotics suggest that dry powder inhalation is a patient-friendly and well-tolerated approach in treating respiratory infections compared to conventional treatments. Rifampicin, a well-known anti-TB drug given orally, is a good candidate for clinical development as a dry powder inhaler.

Recent Updates in Inhalable Drug Delivery System against Various Pulmonary Diseases: Challenges and Future Perspectives

In the current scenario, pulmonary disease has become a prime burden for morbidity and mortality alongside tremendous social and economic crises throughout the world. Numerous conventional drug delivery system and treatment approach targeting the respiratory region has been driven out. However, effective and accurate recovery has not been achieved yet. In this regard, nanotechnological- based inhalable drug delivery strategy including polymeric, lipidic, or metallic-based respirable microparticles plays an indispensable role in circumventing numerous challenges faced during traditional treatment. Excellent aerodynamic performance leads to enhanced lung targetability, reduced dosing frequency and hence systemic toxicities, as well as improved pharmaceutical attributes, and therefore pharmacokinetic profiles are interminable factors associated with nanotechnologicalbased inhalable delivery. In this review, we comprehensively explored recent advancements in nanotechnologically engineered inhalable formulations targeting each of the mentioned pulmonary diseases. Moreover, we systematically discussed possible respiratory or systemic toxicities about the indeterminate and undefined physicochemical characteristics of inhaled particles.

Inhalable dry powder containing remdesivir and disulfiram: Preparation and in vitro characterization

The respiratory tract, as the first and most afflicted target of many viruses such as SARS-CoV-2, seems to be the logical choice for delivering antiviral agents against this and other respiratory viruses. A combination of remdesivir and disulfiram, targeting two different steps in the viral replication cycle, has showed synergistic activity against SARS-CoV-2 in-vitro. In this study, we have developed an inhalable dry powder containing a combination of remdesivir and disulfiram utilizing the spray-drying technique, with the final goal of delivering this drug combination to the respiratory tract. The prepared dry powders were spherical, and crystalline. The particle size was between 1 and 5 μm indicating their suitability for inhalation. The spray-dried combinational dry powder containing remdesivir and disulfiram (RDSD) showed a higher emitted dose (ED) of >88% than single dry powder of remdesivir (RSD) (∼72%) and disulfiram (DSD) (∼84%), with a fine particle fraction (FPF) of ∼55%. Addition of L-leucine to RDSD showed >60% FPF with a similar ED. The in vitro aerosolization was not significantly affected after the stability study conducted at different humidity conditions. Interestingly, the single (RSD and DSD) and combined (RDSD) spray-dried powders showed limited cellular toxicity (CC50 values from 39.4 to >100 µM), while maintaining their anti-SARS-CoV-2 in vitro (EC50 values from 4.43 to 6.63 µM). In a summary, a combinational dry powder formulation containing remdesivir and disulfiram suitable for inhalation was developed by spray-drying technique which showed high cell viability in the respiratory cell line (Calu-3 cells) retaining their anti-SARS-CoV-2 property. In the future, in vivo studies will test the ability of these formulations to inhibit SARS-CoV-2 which is essential for clinical translation.

Novel therapeutic approach for the treatment of cystic fibrosis based on freeze-dried tridrug microparticles to treat cystic fibrosis

BACKGROUND

Cystic fibrosis is a severe, autosomal recessive disease that shortens life expectancy. According to studies, approximately 27% of patients with CF aged 2-5 years and 60 to 70% of adult patients are infected with P. aeruginosa. The patients experience bronchospasm leading to a persistent contracted state of the airways.

OBJECTIVES

The current work explores the possibility of combining ivacaftor and ciprofloxacin to combat the bacteria. A third drug L-salbutamol would be coated onto the surface of the drug-entrappped microparticles to instantaneously provide relief from bronchoconstriction.

METHODS

The microparticles were prepared using bovine serum albumin and L-leucine using the freeze-drying approach. The process and formulation parameters were optimized. The prepared microparticles were surface coated by L-salbutamol using the dry-blending method. The microparticles were subjected to rigorous in-vitro characterization for entrapment, inhalability, antimicrobial activity, cytotoxicity study and safety. The performance of the microparticles to be loaded into a inhaler was checked by the Anderson cascade impactor.

RESULTS

The freeze-dried microparticles had a particle size of 817.5 ± 5.6 nm with a polydispersity ratio of 0.33. They had a zeta potential of -23.3 ± 1.1 mV. The mass median aerodynamic diameter of the microparticles was 3.75 ± 0.07 μm, and the geometric standard diameter was 1.66 ± 0.033 μm. The microparticles showed good loading efficiency for all three drugs. DSC, SEM, XRD, and FTIR studies confirmed the entrapment of ivacaftor and ciprofloxacin. SEM and TEM scans observed the shape and the smooth surface. Antimicrobial synergism was proven by the agar broth, and dilution technique and the formulation was deemed safe by the results of the MTT assay.

CONCLUSION

Freeze-dried microparticles of ivacaftor, ciprofloxacin, and L-salbutamol could pave way to a hitherto unexplored combination of drugs as a novel approach to treat P. aeruginosa infcetions and bronchoconstriction commonly associated with cystic fibrosis.

Preparation Strategies of the Anti-Mycobacterial Drug Bedaquiline for Intrapulmonary Routes of Administration

Mycobacterium tuberculosis (M.tb) has infected one-quarter of the world's population and led to the deaths of 1.6 million individuals in 2021 according to estimates from the World Health Organization. The rise in prevalence of multidrug-resistant and extensively drug-resistant M.tb strains coupled with insufficient therapies to treat such strains has motivated the development of more effective treatments and/or delivery modalities. Bedaquiline, a diarylquinoline antimycobacterial agent, effectively targets mycobacterial ATP synthase but may lead to systemic complications upon oral delivery. Targeted delivery of bedaquiline to the lungs represents an alternative strategy to harness the sterilizing benefits of the drug against M.tb while mitigating off-target side effects. Two pulmonary delivery modalities were developed herein, including dry powder inhalation and liquid instillation. Despite bedaquiline's poor water solubility, spray drying was performed in predominantly aqueous conditions (≥80%) to avoid a closed-loop, inert system. Aerosols of spray-dried bedaquiline with L-leucine excipient outperformed spray-dried bedaquiline alone, demonstrating superior fine particle fraction metrics (~89% of the emitted dose below <5 µm), suitable for inhalation therapies. Furthermore, the use of a 2-hydroxypropyl-β-cyclodextrin excipient allowed a molecular dispersion of bedaquiline in an aqueous solution for liquid instillation. Both delivery modalities were successfully administered to Hartley guinea pigs for pharmacokinetic analysis and were well-tolerated by the animals. Intrapulmonary liquid delivery of bedaquiline led to adequate serum absorption and appropriate peak serum concentrations of the drug. The liquid formulation was superior in systemic uptake compared to the powder formulation. The predominant route via which M.tb bacilli enter the body is aerosol droplets that are deposited onto airway surfaces. For this reason, we believe that further studies should focus on inhalation or intrapulmonary therapies that target the site of entry and primary site of infection for M.tb.

A ready-to-use dry powder formulation based on protamine nanocarriers for pulmonary drug delivery

The use of oral antibiotic therapy for the treatment of respiratory diseases such as tuberculosis has promoted the appearance of side effects as well as resistance to these treatments. The low solubility, high metabolism, and degradation of drugs such as rifabutin, have led to the use of combined and prolonged therapies, which difficult patient compliance. In this work, we develop inhalable formulations from biomaterials such as protamine to improve the therapeutic effect. Rifabutin-loaded protamine nanocapsules (NCs) were prepared by solvent displacement method and were physico-chemically characterized and evaluated for their dissolution, permeability, stability, cytotoxicity, hemocompatibility, internalization, and aerodynamic characteristics after a spray-drying procedure. Protamine NCs presented a size of around 200 nm, positive surface charge, and drug association up to 54%. They were stable as suspension under storage, as well as in biological media and as a dry powder after lyophilization in the presence of mannitol. Nanocapsules showed a good safety profile and cellular uptake with no tolerogenic effect on macrophages and showed good compatibility with red blood cells. Moreover, the aerodynamic evaluation showed a fine particle fraction deposition up to 30% and a mass median aerodynamic diameter of about 5 µm, suitable for the pulmonary delivery of therapeutics.

Bedaquiline in Drug-Resistant Tuberculosis: A Mini-Review

Mycobacterium tuberculosis causes a contagious pulmonary disease with a high mortality rate in developing countries. However, the recommendation of DOTS (approved by WHO) was effective in treating tuberculosis, but nowadays, resistance from the first line (MDR-TB) and the second line (XDR-TB) drugs is highly common. Whereas, the resistance is a result of factors like poor patient constancy due to the long duration of therapy and co-infection with HIV. The approval of bedaquiline under an accelerated program for the treatment of MDR-TB has revealed its effectiveness in clinical trials as a therapeutic novel molecule. BDQ selectively inhibits the ATP synthase of bacterium and reduces ATP production. Additionally, the poor pharmacokinetic properties raised provocations in the MDR therapy, but the use of targeted drug delivery can solve the hurdles. While the preclinical and clinical studies included in this review are strongly suggesting the usefulness of BDQ in MDR-TB and XDR-TB, the repurposing of different drug classes in resistant TB is opening new opportunities to manage the disease conditions. In this review, we have summarized the examples of pipeline drugs and repurposed molecules with preclinical formulation developments.

Bedaquiline fumarate microemulsion: formulation optimization, rheological characterization and in vitro studies

Aim: Bedaquiline fumarate (BQF), an antitubercular drug, shows limited bioavailability due to solubility-limited intestinal absorption. In this research, the authors formulated a BQF-loaded microemulsion to improve BQF's oral bioavailability. Methods: Microemulsion was prepared by a spontaneous emulsification method and evaluated for thermodynamic stability, size, dispersibility, transmittance, rheology, microrheology, drug release, cytotoxicity and cellular uptake. Results: Microemulsion showed an average globule size of 26.50 ± 6.29 nm with spherical geometry and revealed gel-sol-gel behavior in microrheological studies. Cytotoxicity and cell uptake studies in Caco-2 cells showed that BQF microemulsion was cytocompatible at the highest concentration of 500 μg/ml with significantly higher cellular uptake than control. Conclusion: The present study indicates that BQF microemulsion could be explored further for effective treatment of multidrug-resistant tuberculosis.

Dry powder inhalers of antitubercular drugs

Despite advancements in the medical and pharmaceutical fields, tuberculosis remains a major health problem globally. Patients do not widely accept the conventional approach to treating tuberculosis (TB) due to prolonged treatment periods with multiple high doses of drugs and associated side effects. A pulmonary route is a non-invasive approach to delivering drugs, hormones, nucleic acid, steroids, proteins, and peptides directly to the lungs, improving the efficacy of the treatment and consequently decreasing the adverse effect of the treatment. This route has been successfully developed for the treatment of various respiratory diseases such as asthma, chronic obstructive pulmonary disease (COPD), tuberculosis (TB), lung cancer, and other pulmonary infections. The major approaches of inhalation delivery systems include nebulizers, metered-dose inhalers (MDIs), and dry powder inhalers (DPIs). However, dry powder inhalers (DPIs) are more advantageous due to their stability and ability to deliver a high dose of the drug to the lungs. The present review analyzes the modern therapeutic approach of inhaled dry powders, with a special focus on novel drug delivery system (NDDS) based DPIs for the treatment of TB. The article also discussed the challenges of preparing inhalable dry powder formulations for the treatment of TB. The clinical development of inhalable anti-TB drugs is also reviewed.

Polymeric Microparticles: Synthesis, Characterization and In Vitro Evaluation for Pulmonary Delivery of Rifampicin

Rifampicin, a potent broad-spectrum antibiotic, remains the backbone of anti-tubercular therapy. However, it can cause severe hepatotoxicity when given orally. To overcome the limitations of the current oral therapy, this study designed inhalable spray-dried, rifampicin-loaded microparticles using aloe vera powder as an immune modulator, with varying concentrations of alginate and L-leucine. The microparticles were assessed for their physicochemical properties, in vitro drug release and aerodynamic behavior. The spray-dried powders were 2 to 4 µm in size with a percentage yield of 45 to 65%. The particles were nearly spherical with the tendency of agglomeration as depicted from Carr’s index (37 to 65) and Hausner’s ratios (>1.50). The drug content ranged from 0.24 to 0.39 mg/mg, with an association efficiency of 39.28 to 96.15%. The dissolution data depicts that the in vitro release of rifampicin from microparticles was significantly retarded with a higher L-leucine concentration in comparison to those formulations containing a higher sodium alginate concentration due to its hydrophobic nature. The aerodynamic data depicts that 60 to 70% of the aerosol mass was emitted from an inhaler with MMAD values of 1.44 to 1.60 µm and FPF of 43.22 to 55.70%. The higher FPF values with retarded in vitro release could allow sufficient time for the phagocytosis of synthesized microparticles by alveolar macrophages, thereby leading to the eradication of M. tuberculosis from these cells.

Nano-in-Microparticles for Aerosol Delivery of Antibiotic-Loaded, Fucose-Derivatized, and Macrophage-Targeted Liposomes to Combat Mycobacterial Infections: In Vitro Deposition, Pulmonary Barrier Interactions, and Targeted Delivery

Nontuberculous mycobacterial infections rapidly emerge and demand potent medications to cope with resistance. In this context, targeted loco-regional delivery of aerosol medicines to the lungs is an advantage. However, sufficient antibiotic delivery requires engineered aerosols for optimized deposition. Here, the effect of bedaquiline-encapsulating fucosylated versus nonfucosylated liposomes on cellular uptake and delivery is investigated. Notably, this comparison includes critical parameters for pulmonary delivery, i.e., aerosol deposition and the noncellular barriers of pulmonary surfactant (PS) and mucus. Targeting increases liposomal uptake into THP-1 cells as well as peripheral blood monocyte- and lung-tissue derived macrophages. Aerosol deposition in the presence of PS, however, masks the effect of active targeting. PS alters antibiotic release that depends on the drug's hydrophobicity, while mucus reduces the mobility of nontargeted more than fucosylated liposomes. Dry-powder microparticles of spray-dried bedaquiline-loaded liposomes display a high fine particle fraction of >70%, as well as preserved liposomal integrity and targeting function. The antibiotic effect is maintained when deposited as powder aerosol on cultured Mycobacterium abscessus. When treating M. abscessus infected THP-1 cells, the fucosylated variant enabled enhanced bacterial killing, thus opening up a clear perspective for the improved treatment of nontuberculous mycobacterial infections.

Repurposing Bedaquiline for Effective Non-Small Cell Lung Cancer (NSCLC) Therapy as Inhalable Cyclodextrin-Based Molecular Inclusion Complexes

There is growing evidence that repurposed drugs demonstrate excellent efficacy against many cancers, while facilitating accelerated drug development process. In this study, bedaquiline (BDQ), an FDA approved anti-mycobacterial agent, was repurposed and an inhalable cyclodextrin complex formulation was developed to explore its anti-cancer activity in non-small cell lung cancer (NSCLC). A sulfobutyl ether derivative of β-cyclodextrin (SBE-β-CD) was selected based on phase solubility studies and molecular modeling to prepare an inclusion complex of BDQ and cyclodextrin. Aqueous solubility of BDQ was increased by 2.8 × 10³-fold after complexation with SBE-β-CD, as compared to its intrinsic solubility. Solid-state characterization studies confirmed the successful incorporation of BDQ in the SBE-β-CD cavity. In vitro lung deposition study results demonstrated excellent inhalable properties (mass median aerodynamic diameter: 2.9 ± 0.6 µm (<5 µm) and fine particle fraction: 83.3 ± 3.8%) of BDQ-CD complex. Accelerated stability studies showed BDQ-CD complex to be stable up to 3 weeks. From cytotoxicity studies, a slight enhancement in the anti-cancer efficacy was observed with BDQ-cyclodextrin complex, compared to BDQ alone in H1299 cell line. The IC₅₀ values for BDQ and BDQ-CD complex were found to be ~40 µM in case of H1299 cell line at 72 h, whereas BDQ/BDQ-CD were not found to be cytotoxic up to concentrations of 50 µM in A549 cell line. Taken together, BDQ-CD complex offers a promising inhalation strategy with efficient lung deposition and cytotoxicity for NSCLC treatment.

Leucine as an excipient in spray dried powder for inhalation

Leucine is a promising excipient with several applications in the development of inhalable spray-dried powder of high- and low-dose drugs. The addition of leucine has exhibited significant enhancing effects on the aerosolization and physical stability of the produced particles. Here, we focus not only on the applications of leucine in inhalable spray-drying powders, but also on the underlying mechanisms by which the formulation and processing parameters dictate the behavior of leucine during the drying process and, therefore, its functionalities within the dried powder. Additionally, we highlight the current regulatory status of leucine. Such insights are important for more efficient utilization of leucine in the future, both for dry powder inhaler formulations and other pharmaceutical applications.

Advances in Pulmonary Drug Delivery

Pulmonary drug delivery represents an attractive, non-invasive administration option. In addition to locally acting drugs, molecules that are intended to produce systemic effects can be delivered via the pulmonary route. Several factors need to be considered in the context of delivering drugs to or via the lungs—in addition to the drug itself, its formulation into an appropriate inhalable dosage form of sufficient stability is critical. It is also essential that this formulation is paired with a suitable inhaler device, which generates an aerosol of a particle/droplet size that ensures deposition in the desired region of the respiratory tract. Lastly, the patient’s (patho-) physiology and inhalation manoeuvre are of importance. This Special Issue brings together recent advances in the areas of inhalation device testing, aerosol formulation development, use of in vitro and in silico models in pulmonary drug deposition and drug disposition studies, and pulmonary delivery of complex drugs, such as vaccines, antibiotics and peptides, to or via the lungs.

Development of an Innovative, Carrier-Based Dry Powder Inhalation Formulation Containing Spray-Dried Meloxicam Potassium to Improve the In Vitro and In Silico Aerodynamic Properties

Most of the marketed dry powder inhalation (DPI) products are traditional, carrier-based formulations with low drug concentrations deposited in the lung. However, due to their advantageous properties, their development has become justified. In our present work, we developed an innovative, carrier-based DPI system, which is an interactive physical blend of a surface-modified carrier and a spray-dried drug with suitable shape and size for pulmonary application. Meloxicam potassium, a nonsteroidal anti-inflammatory drug (NSAID), was used as an active ingredient due to its local anti-inflammatory effect and ability to decrease the progression of cystic fibrosis (CF) and chronic obstructive pulmonary disease (COPD). The results of the in vitro and in silico investigations showed high lung deposition in the case of this new formulation, confirming that the interparticle interactions were changed favorably.