Hyperthermia-Triggered Doxorubicin Release from Polymer-Coated Magnetic Nanorods

Different conjugates of Fe3O4 nanoparticles, drug, and dye: optical and magnetic properties for in vivo bimodal imaging

Bioimaging is very important in medicine, especially in cancer diagnosis and treatment. In this study, we determined the impact of different components on the optical and magnetic properties of various conjugates. The three components, i.e., Fe3O4 nanoparticles (NPs), drug (doxorubicin - Dox), and dye (Cyanine 5.5 - Cy 5.5), were incorporated to form the four conjugates of A1 (Fe3O4-Cy 5.5), A2 (Fe3O4-Dox), A3 (Fe3O4-Cy 5.5-Dox), and A4 (Cy 5.5-Dox). The conjugates were characterized by DLS, UV-Vis spectra, fluorescence spectra, VSM, XRD, and TEM methods. After that, in vitro near-infrared (NIR) fluorescence imaging and magnetic resonance imaging (MRI) experiments were carried out to determine the conjugate suitable for bimodal imaging. The results show that A3 exhibits the highest quantum yield and radiance ratio and also has the highest ratio of r 2/r 1. The in vivo MRI and NIR fluorescent imaging results of CT26-bearing mice injected with A3 conjugates prove that the conjugate has potential in bimodal cancer imaging applications.

Gold nanorod-based smart platform for efficient cellular uptake and combination therapy

Gold nanorods (GNRs) have received much attention as potential drug-delivery vehicles because of their various advantages such as good biocompatibility, passive targeting, responsiveness to stimuli, and easy post-functionalization by surface modification. However, the drug structure might be changed for loading into GNRs, making it difficult to load various drugs, and the space to contain drugs is small, making it difficult to deliver sufficient drugs required for treatment compared with other porous materials. Herein, we report an amphiphilic polymer-coated GNR platform for chemo- and photothermal combination therapy. Amphiphilic polymers comprise hydrophobic alkyl chains for drug encapsulation, polyethylene glycol for biocompatibility, and folic acid for cancer targeting. GNRs generate heat energy under near-infrared light irradiation, promoting controlled drug release, and inducing cellular uptake by deforming the cell membrane. On-demand release behavior was traced with Nile red, and targeting and delivery efficiency were confirmed with paclitaxel through cellular experiments. This GNR-based platform enables combination therapy with passive and active targeting to enhance the efficacy of cancer treatment.

Recent advances in functionalized ferrite nanoparticles: From fundamentals to magnetic hyperthermia cancer therapy

Cancers are fatal diseases that lead to most death of human beings, which urgently require effective treatments methods. Hyperthermia therapy employs magnetic nanoparticles (MNPs) as heating medium under external alternating magnetic field. Among various MNPs, ferrite nanoparticles (FNPs) have gained significant attention for hyperthermia therapy due to their exceptional magnetic properties, high stability, favorable biological compatibility, and low toxicity. The utilization of FNPs holds immense potential for enhancing the effectiveness of hyperthermia therapy. The main hurdle for hyperthermia treatment includes optimizing the heat generation capacity of FNPs and controlling the local temperature of tumor region. This review aims to comprehensively evaluate the magnetic hyperthermia treatment (MHT) of FNPs, which is accomplished by elucidating the underlying mechanism of heat generation and identifying influential factors. Based upon fundamental understanding of hyperthermia of FNPs, valuable insights will be provided for developing efficient nanoplatforms with enhanced accuracy and magnetothermal properties. Additionally, we will also survey current research focuses on modulating FNPs' properties, external conditions for MHT, novel technical methods, and recent clinical findings. Finally, current challenges in MHT with FNPs will be discussed while prospecting future directions.

Brownian Relaxation Shakes and Breaks Magnetic Iron Oxide-Polymer Nanocomposites to Release Cargo

Magnetic nanoparticles (NPs) are widely employed for remote controlled molecular release applications using alternating magnetic fields (AMF). Yet, they intrinsically generate heat in the process by Néel relaxation limiting their application scope. In contrast, iron oxide NPs larger than ≈15 nm react to AMF by Brownian relaxation resulting in tumbling and shaking. Here, such iron oxide NPs are combined with polymer shells where the shaking motion mechanically agitates and partially detaches the polymer chains, covalently cleaves a fraction of the polymers, and releases the prototypical cargo molecules doxorubicin and curcumin into solution. This heat-free release mechanism broadens the potential application space of polymer-functionalized magnetic NP composites.

Surface modified iron-oxide based engineered nanomaterials for hyperthermia therapy of cancer cells

Magnetic hyperthermia is emerging as a promising alternative to the currently available cancer treatment modalities. Superparamagnetic iron-oxide nanoparticles (SPIONs) are extensively studied functional nanomaterials for biomedical applications, owing to their tunable physio-chemical properties and magnetic properties. Out of various ferrite classes, spinel and inverse-spinel ferrites are widely used but are affected by particle size distribution, particle shape, particle-particle interaction, geometry, and crystallinity. Notably, their heating ability makes them suitable candidates for heat-mediated cancer cell ablation or hyperthermia therapy. Exposing SPIONs to an externally applied magnetic field of appropriate frequency and intensity causes them to release heat to ablate cancer cells. Majorly, three heating mechanisms are exhibited by magnetic nanomaterials: Nèel relaxation, Brownian relaxation, and hysteresis losses. In SPIONs, Nèel and Brownian relaxations dominate, whereas hysteric losses are negligible. These nanomaterials possess high magnetization values capable of generating heat to ablate cancer cells. Furthermore, surface functionalization of these materials imparts the ability to selectively target cancer cells and deliver cargo to the affected area sparing the normal body cells. The surface of nanoparticles can be functionalized with various physical, chemical, and biological coatings. Moreover, hyperthermia can be applied in combination with other cancer treatment modalities in order to enhance the efficiency of treatment.

Combined Magnetic Hyperthermia and Photothermia with Polyelectrolyte/Gold-Coated Magnetic Nanorods

Magnetite nanorods (MNRs) are synthesized based on the use of hematite nanoparticles of the desired geometry and dimensions as templates. The nanorods are shown to be highly monodisperse, with a 5:1 axial ratio, and with a 275 nm long semiaxis. The MNRs are intended to be employed as magnetic hyperthermia and photothermia agents, and as drug vehicles. To achieve a better control of their photothermia response, the particles are coated with a layer of gold, after applying a branched polyethyleneimine (PEI, 2 kDa molecular weight) shell. Magnetic hyperthermia is performed by application of alternating magnetic fields with frequencies in the range 118-210 kHz and amplitudes up to 22 kA/m. Photothermia is carried out by subjecting the particles to a near-infrared (850 nm) laser, and three monochromatic lasers in the visible spectrum with wavelengths 480 nm, 505 nm, and 638 nm. Best results are obtained with the 505 nm laser, because of the proximity between this wavelength and that of the plasmon resonance. A so-called dual therapy is also tested, and the heating of the samples is found to be faster than with either method separately, so the strengths of the individual fields can be reduced. Due to toxicity concerns with PEI coatings, viability of human hepatoblastoma HepG2 cells was tested after contact with nanorod suspensions up to 500 µg/mL in concentration. It was found that the cell viability was indistinguishable from control systems, so the particles can be considered non-cytotoxic in vitro. Finally, the release of the antitumor drug doxorubicin is investigated for the first time in the presence of the two external fields, and of their combination, with a clear improvement in the rate of drug release in the latter case.

Functionalized Magnetic Nanoparticles for Alternating Magnetic Field- or Near Infrared Light-Induced Cancer Therapies

The multi-faceted nature of functionalized magnetic nanoparticles (fMNPs) is well-suited for cancer therapy. These nanocomposites can also provide a multimodal platform for targeted cancer therapy due to their unique magnetic guidance characteristics. When induced by an alternating magnetic field (AMF), fMNPs can convert the magnetostatic energy to heat for magnetic hyperthermia (MHT), as well as for controlled drug release. Furthermore, with the ability to convert near-infrared (NIR) light energy to heat energy, fMNPs have attracted interest for photothermal therapy (PTT). Other than MHT and PTT, fMNPs also have a place in combination cancer therapies, such as chemo-MHT, chemo-PTT, and chemo-PTT-photodynamic therapy, among others, due to their versatile properties. Thus, this review presents multifunctional nanocomposites based on fMNPs for cancer therapies, induced by an AMF or NIR light. We will first discuss the different fMNPs induced with an AMF for cancer MHT and chemo-MHT. Secondly, we will discuss fMNPs irradiated with NIR lasers for cancer PTT and chemo-PTT. Finally, fMNPs used for dual-mode AMF + NIR-laser-induced magneto-photo-hyperthermia (MPHT) will be discussed.

Tailoring nanoparticles design for enhanced heating efficiency and improved magneto-chemo therapy for glioblastoma

Development of multifunctional magnetic nanomaterials (MNPs) with improved heat-generating capabilities and effective combination with localized chemotherapy has emerged as a promising therapeutic regime for solid tumors like glioblastoma. In this regard, the shape-dependent hyperthermic and chemo-therapeutic potential of nanomaterials, has not been extensively explored. Here we present, development of various morphological designs of MNPs including spherical, clusters, rods and cubic; to compare the effect of shape on tuning the properties of MNPs that are relevant to many potential biomedical applications like drug delivery, cellular uptake and heat generation. The study includes extensive comparison of morpho-structural characteristics, size distributions, chemical composition, surface area measurements and magnetic properties of the variable shaped MNPs. Further the heating efficiencies in aqueous and cellular environments and heat triggered drug release profiles for successful magneto-chemotherapy were compared among all in-house synthesized MNPs. Under biosafety limit considerations given by Hergt's limit (H*f value <5 × 10⁹ Am^-1 s^-1), cuboidal shaped MNPs demonstrated highest heating efficiency owing to magnetosome-like chain formation along with sustained drug release profile as compared to other synthesized MNPs. The mechanism of cancer cell death mediated via magneto-chemotherapy was elucidated to be the oxidative stress-mediated apoptotic cell death pathway. In vivo studies further demonstrated complete tumor regression only in the magneto-chemotherapy treated group. These findings suggest the potential of combinatorial therapy to overcome the clinical limitations of the independent therapies for advanced thermotherapy of glioblastoma.

New Water-Soluble Magnetic Field-Induced Drug Delivery System Obtained Via Preferential Molecular Marriage over Narcissistic Self-Sorting

Nanomaterials that respond to stimuli are of considerable interest for drug delivery applications. Drug delivery has been a leading challenge when it comes to the externally triggered controlled release of hydrophobic drugs. The present paper describes a unique arrangement of polymers in a competitive environment derived from the dynamic self-sorting behavior of the hydrophobic chains of amphiphilic mPEG-PLLA and poly-l-lactic acid (PLLA)-coated iron oxide nanoparticles IONP@PLLA to achieve a core-shell structure in which the hydrophobic PLLA part acts as a dense core and poly(ethylene glycol) (PEG) as an uncrowded shell. By using irreversible covalent interactions created by hydrophobic polymer-functionalized IONPs, it was possible to selectively form socially self-sorted nanocarriers (SS-NCs) with a higher hydrophobic core than the hydrophilic shell over narcissistic self-sorted nanocarriers (NS-NCs), that is, homo-micelles of amphiphilic polymers. The higher hydrophobic core of SS-NCs is indeed helpful in achieving higher drug [doxorubicin (DOX)] loading and encapsulation efficiencies of around 17 and 90%, respectively, over 10.3 and 65.6% for NS-NCs. Furthermore, due to the presence of IONPs and the densely packed hydrophobic compartments, the controlled release of DOX was facilitated by direct magnetism and temperature stimulation when an alternating magnetic field (AMF) was applied. An appreciably higher rate of drug release (∼50%) than that without AMF (∼18%) was achieved under ambient conditions in 24 h. The present study, therefore, proposes a new drug delivery system that exceeds homo-micelles and adds an extra feature of manipulating drug release through magnetism and temperature, that is, hyperthermia.

Iron–Gold Nanoflowers: A Promising Tool for Multimodal Imaging and Hyperthermia Therapy

The development of nanoplatforms prepared to perform both multimodal imaging and combined therapies in a single entity is a fast-growing field. These systems are able to improve diagnostic accuracy and therapy success. Multicomponent Nanoparticles (MCNPs), composed of iron oxide and gold, offer new opportunities for Magnetic Resonance Imaging (MRI) and Computed Tomography (CT) diagnosis, as well as combined therapies based on Magnetic Hyperthermia (MH) and Photothermal Therapy (PT). In this work, we describe a new seed-assisted method for the synthesis of Au@Fe Nanoparticles (NPs) with a flower-like structure. For biomedical purposes, Au@Fe NPs were functionalized with a PEGylated ligand, leading to high colloidal stability. Moreover, the as-obtained Au@Fe-PEG NPs exhibited excellent features as both MRI and CT Contrast Agents (CAs), with high r2 relaxivity (60.5 mM−1⋅s−1) and X-ray attenuation properties (8.8 HU mM−1⋅HU). In addition, these nanoflowers presented considerable energy-to-heat conversion under both Alternating Magnetic Fields (AMFs) (∆T ≈ 2.5 °C) and Near-Infrared (NIR) light (∆T ≈ 17 °C). Finally, Au@Fe-PEG NPs exhibited very low cytotoxicity, confirming their potential for theranostics applications.

Maghemite (γ-Fe2O3) and γ-Fe2O3-TiO2 Nanoparticles for Magnetic Hyperthermia Applications: Synthesis, Characterization and Heating Efficiency

In this report, the heating efficiencies of γ-Fe₂O₃ and hybrid γ-Fe₂O₃-TiO₂ nanoparticles NPs under an alternating magnetic field (AMF) have been investigated to evaluate their feasible use in magnetic hyperthermia. The NPs were synthesized by a modified sol-gel method and characterized by different techniques. X-ray diffraction (XRD), Mössbauer spectroscopy and electron microscopy analyses confirmed the maghemite (γ-Fe₂O₃) phase, crystallinity, good uniformity and 10 nm core sizes of the as-synthesized composites. SQUID hysteresis loops showed a non-negligible coercive field and remanence suggesting the ferromagnetic behavior of the particles. Heating efficiency measurements showed that both samples display high heating potentials and reached magnetic hyperthermia (42 °C) in relatively short times with shorter time (~3 min) observed for γ-Fe₂O₃ compared to γ-Fe₂O₃-TiO₂. The specific absorption rate (SAR) values calculated for γ-Fe₂O₃ (up to 90 W/g) are higher than that for γ-Fe₂O₃-TiO₂ (~40 W/g)_, confirming better heating efficiency for γ-Fe₂O₃ NPs. The intrinsic loss power (ILP) values of 1.57 nHm²/kg and 0.64 nHm²/kg obtained for both nanocomposites are in the range reported for commercial ferrofluids (0.2–3.1 nHm²/kg). Finally, the heating mechanism responsible for NP heat dissipation is explained concluding that both Neel and Brownian relaxations are contributing to heat production. Overall, the obtained high heating efficiencies suggest that the fabricated nanocomposites hold a great potential to be utilized in a wide spectrum of applications, particularly in magnetic photothermal hyperthermia treatments.

Dual Loading of Doxorubicin and Magnetic Iron Oxide into PLA-TPGS Nanoparticles: Design, in vitro Drug Release Kinetics, and Biological Effects on Cancer Cells

The multifunctional nano drug delivery system (MNDDS) has much revolutionized in cancer treatment, aiming to eliminate many disadvantages of conventional formulations. This paper herein proposes and demonstrates MNDDS inspired by poly(lactide)-tocopheryl polyethylene glycol succinate (PLA-TPGS) copolymer co-loaded Doxorubicin and magnetic iron oxide nanoparticles (MIONs) with a 1 : 1 (w/w) optimal ratio. In vitro drug release kinetics of Doxorubicin from this nanosystem fitted best to the Weibull kinetic model and can be described by the classical Fickian diffusion mechanism under acidic pH conditions. The combination of MIONs and Doxorubicin in the PLA-TPGS copolymer has maintained the fluorescence properties of Doxorubicin and good cell penetration, especially inside the nucleus and its vicinity. Moreover, different cell cycle profiles were observed in HeLa cell lines treated with MNDDSs.

Advantages and Disadvantages of Using Magnetic Nanoparticles for the Treatment of Complicated Ocular Disorders

Nanomaterials provide enormous opportunities to overcome the limitations of conventional ocular delivery systems, such as low therapeutic efficacy, side effects due to the systemic exposure, or invasive surgery. Apart from the more common ocular disorders, there are some genetic diseases, such as cystic fibrosis, that develop ocular disorders as secondary effects as long as the disease progresses. These patients are more difficult to be pharmacologically treated using conventional drug routes (topically, systemic), since specific pharmacological formulations can be incompatible, display increased toxicity, or their therapeutic efficacy decreases with the administration of different kind of chemical molecules. Magnetic nanoparticles can be used as potent drug carriers and magnetic hyperthermia agents due to their response to an external magnetic field. Drugs can be concentrated in the target point, limiting the damage to other tissues. The other advantage of these magnetic nanoparticles is that they can act as magnetic resonance imaging agents, allowing the detection of the exact location of the disease. However, there are some drawbacks related to their use in drug delivery, such as the limitation to maintain efficacy in the target organ once the magnetic field is removed from outside. Another disadvantage is the difficulty in maintaining the therapeutic action in three dimensions inside the human body. This review summarizes all the application possibilities related to magnetic nanoparticles in ocular diseases.

Recent Advancements of Specific Functionalized Surfaces of Magnetic Nano- and Microparticles as a Theranostics Source in Biomedicine

Magnetic nano- and microparticles (MNMPs) belong to a highly versatile class of colloids with actuator and sensor properties that have been broadly studied for their application in theranostics such as molecular imaging and drug delivery. The use of advanced biocompatible, biodegradable polymers and polyelectrolytes as MNMP coating materials is essential to ensure the stability of MNMPs and enable efficient drug release while at the same time preventing cytotoxic effects. In the past years, huge progress has been made in terms of the design of MNMPs. Especially, the understanding of coating formation with respect to control of drug loading and release kinetics on the molecular level has significantly advanced. In this review, recent advancements in the field of MNMP surface engineering and the applicability of MNMPs in research fields of medical imaging, diagnosis, and nanotherapeutics are presented and discussed. Furthermore, in this review the main emphasis is put on the manipulation of biological specimens and cell trafficking, for which MNMPs represent a favorable tool enabling transport processes of drugs through cell membranes. Finally, challenges and future perspectives for applications of MNMPs as theranostic nanomaterials are discussed.

Synthesis of manganese doped β-FeOOH and MnFe2O4 nanorods for enhanced drug delivery and hyperthermia application

Preparation of manganese ferrite (MnFe2O4) nanorods by the reduction of akaganeite seeds in the presence of oleylamine is reported. The Mn-doped β-FeOOH akaganeite seeds have been processed by the hydrolysis of metal-chloride salts in the presence of polyethylenimine (PEI) surfactant. The hydrophobic oleylamine capped nanorods are made hydrophilic using trisodium citrate as a phase transferring agent. The nanorods form with an aspect ratio of 5.47 and possess a high magnetisation value of 69 emu/g at an applied magnetic field of 1.5 T. The colloidal water dispersion of nanorods exhibits superior heating efficiency by the application of alternating magnetic field (AMF). A specific absorption rate value of 798 W/g is achieved at an applied AMF of field strength 500 Oe and frequency 316 kHz. Further, the citrate functionalised nanorods are capable of attaching with doxorubicin (DOX) electrostatically with a loading efficiency of 97% and the drug release is pH responsive. The DOX loaded nanorods show a promising effect on the apoptosis of MCF-7 as experimented in vitro.

(Para)magnetic hybrid nanocomposites for dual MRI detection and treatment of solid tumours

We report a hybrid magnetic nanocomposite (mHNCs-Dox) incorporating a chemotherapeutic drug and dual superparamagnetic and paramagnetic cargo. This system exhibits dual contrast behaviour in magnetic resonance imaging as well as enhanced therapeutic anti-cancer capabilities as a thermo-enhanced chemotherapy effector.

Successes and Challenges: Inhaled Treatment Approaches Using Magnetic Nanoparticles in Cystic Fibrosis

Magnetic nanoparticles have been largely applied to increase the efficacy of antibiotics due to passive accumulation provided by enhancing permeability and retention, which is essential for the treatment of lung infections. Recurring lung infections such as in the life-shortening genetic disease cystic fibrosis (CF) are a major problem. The recent advent of the CF modulator drug ivacaftor, alone or in combination with lumacaftor or tezacaftor, has enabled systemic treatment of the majority of patients. Magnetic nanoparticles (MNPs) show unique properties such as biocompatibility and biodegradability as well as magnetic and heat-medicated characteristics. These properties make them suitable to be used as drug carriers and hyperthermia-based agents. Hyperthermia is a promising approach for the thermal activation therapy of several diseases, including pulmonary diseases. The benefits of delivering CF drugs via inhalation using MNPs as drug carriers afford application of sufficient therapeutic dosages directly to the primary target site, while avoiding potential suboptimal pharmacokinetics/pharmacodynamics and minimizing the risks of systemic toxicity. This review explores the multidisciplinary approach of using MNPs as vehicles of drug delivery. Additionally, we highlight advantages such as increased drug concentration at disease site, minimized drug loss and the possibility of specific cell targeting, while addressing major challenges for this emerging field.