Montelukast Nanocrystals for Transdermal Delivery with Improved Chemical Stability

Advanced drug delivery systems for the management of local conditions

Localized disorders, even though originally confined to a specific body part, can progress into potentially life-threatening systemic disorders if treated inappropriately. Local treatment is often highly challenging due to poor penetration of therapeutic agents from their vehicles into the affected body site. Systemic treatment on the other hand often comes with unspecific side effects. The skin is the largest organ of the body, and conditions such as wounds and bacterial or fungal infections disrupt its natural barrier properties, important for the homeostasis of the human body. Advanced drug delivery systems for treating these conditions could greatly improve the treatment outcome and patient compliance. Other parts of the body that are of interest regarding localized treatment are, for example, the eyes along with mucosal tissues which are present in the vagina and lungs. Rather than focusing on specific diseases or parts of the body, this review provides an overview of the different drug delivery platforms that have been employed for enhanced local treatment. The following systems will be discussed: nanoparticle-based systems, such as nanocrystals, polymeric, lipidic, and inorganic nanoparticles, and nanogels; cyclodextrin inclusion complexes; and several devices like microarray patches, wound dressings, and films.

Drug nanocrystals: Surface engineering and its applications in targeted delivery

Drug nanocrystals have received significant attention in drug development due to their enhanced dissolution rate and improved water solubility, making them effective in overcoming issues related to drug hydrophobicity, thereby improving drug bioavailability and treatment effectiveness. Recent advances in preparation techniques have facilitated research on drug surface properties, leading to valuable surface engineering strategies. Surface modification can stabilize drug nanocrystals, making them suitable for versatile drug delivery platforms. Functionalized ligands further enhance the potential for targeted delivery, enabling precision medicine. This review focuses on the surface engineering of drug nanocrystals, discussing various preparation methods, surface ligand design strategies, and their applications in targeted drug delivery, especially for cancer treatments. Finally, challenges and future directions are also discussed to promote the development of drug nanocrystals. The surface engineering of drug nanocrystals promises new opportunities for treating complex and chronic diseases while broadening the application of drug delivery systems.

Co-spray dried inhalable composite powders of ciprofloxacin and alginate oligosaccharide as anti-biofilm therapy

The treatment of chronic respiratory infections caused by biofilm formation are extremely challenging owing to poor drug penetration into the complex biofilm structure and high drug resistance. Local delivery of an antibiotic together with a non-antibiotic adjuvant to the lungs could often enhance the therapeutic responses by targeting different bacterial growth pathways and minimizing drug resistance. In this study, we designed new inhalable dry powders containing ciprofloxacin (CIP) and OligoG (Oli, a low-molecular-weight alginate oligosaccharide impairing the mucoid biofilms by interacting with their cationic ions) to combat respiratory bacterial biofilm infections. The resulting powders were characterized with respect to their morphology, solid-state property, surface chemistry, moisture sorption behavior, and dissolution rate. The aerosol performance and storage stability of the dry powders were also evaluated. The results showed that inhalable dry powders composed of CIP and Oli could be readily accomplished via the wet milling and spray drying process. Upon the storage under 20 ± 2 °C/20 ± 2 % relative humidity (RH) for one month, there was no significant change in the in vitro aerosol performances of the dry powders. In contrast, the dry powders became non-inhalable following the storage at 20 ± 2 °C/53 ± 2 % RH for one month due to the hygroscopic nature of Oli, which could be largely prevented by incorporation of leucine. Collectively, this study suggests that the newly developed co-spray-dried powders composed of CIP and Oli might represent a promising and alternative treatment strategy against respiratory bacterial biofilm infections.

Design of High-Payload Ascorbyl Palmitate Nanosuspensions for Enhanced Skin Delivery

A high-payload ascorbyl palmitate (AP) nanosuspension (NS) was designed to improve skin delivery following topical application. The AP-loaded NS systems were prepared using the bead-milling technique, and softly thickened into NS-loaded gel (NS-G) using hydrophilic polymers. The optimized NS-G system consisted of up to 75 mg/mL of AP, 0.5% w/v of polyoxyl-40 hydrogenated castor oil (Kolliphor® RH40) as the suspending agent, and 1.0% w/v of sodium carboxymethyl cellulose (Na.CMC 700 K) as the thickening agent, in citrate buffer (pH 4.5). The NS-G system was embodied as follows: long and flaky nanocrystals, 493.2 nm in size, -48.7 mV in zeta potential, and 2.3 cP of viscosity with a shear rate of 100 s-1. Both NS and NS-G provided rapid dissolution of the poorly water-soluble antioxidant, which was comparable to that of the microemulsion gel (ME-G) containing AP in solubilized form. In an ex vivo skin absorption study using the Franz diffusion cell mounted on porcine skin, NS-G exhibited faster absorption in skin, providing approximately 4, 3, and 1.4 times larger accumulation than that of ME-G at 3, 6, and 12 h, respectively. Therefore, the high-payload NS makes it a promising platform for skin delivery of the lipid derivative of ascorbic acid.

Nanocrystals in cosmetics and cosmeceuticals by topical delivery

The main issues with local delivery of cosmetics are their high sensitivity and limited drug loading of active pharmaceutical ingredient. Nanocrystal technology offers consumers cutting-edge and effective products and exhibits enormous development potential in the beauty business as a new delivery method to address the issue of low solubility and low permeability of sensitive chemicals. In this review, we described the processes for making NCs, along with the impacts of loading and the uses of different carriers. Among them, nanocrystalline loaded gel and emulsion are widely used and may further improve the stability of the system. Then, we introduced the beauty efficacy of drug NCs from five aspects: anti-inflammation and acne, anti-bacterial, lightening and freckle removal, anti-aging as well as UV protection. Following that, we presented the current scenario about stability and safety. Finally, the challenges and vacancy were discussed along with the potential uses of NCs in the cosmetics industry. This review serves as a resource for the advancement of nanocrystal technology in the cosmetics sector.

Fabricating transdermal film formulations of montelukast sodium with improved chemical stability and extended drug release

Montelukast Sodium (MK) is a leukotriene receptor antagonist, an oral drug generally prescribed to control chronic asthma symptoms. This research aims to provide the transdermal delivery of this drug in a controlled release profile as a better mode of drug delivery, specifically for the pediatric and elderly population. Transdermal delivery of the drug not only improves the drug's bioavailability but also maintains the concentration of the drug in the plasma without increasing the frequency of the drug dosage. Transdermal film formulations were developed using sodium alginate (SA) and lignosulphonic acid (LS) as the matrix and PEG-400 or Glycerine (Gly) as the plasticizers. Various physiochemical characteristic evaluations of the formulated films were conducted, revealing that the formulation with Glycerine as the plasticizer had a smooth surface and was flexible. It was observed that this formulation had the highest moisture uptake capacity and the lowest moisture loss capacity when compared with the other two formulations. It was also observed that the barium chloride cross-linked formulation had a higher swelling index when compared with calcium chloride cross-linked films. The surface pH of all the formulations was monitored to be around 7.5. In the in vitro release studies, the cross-linked films showed a controlled release over 36 h compared with the non-cross-linked films. Based on the observations and results, the cross-linked film formulation showed a better-controlled release of the drug and could potentially increase its bioavailability. TGA analysis of the polymeric mixture demonstrated the thermal stability of the SA blends, which enhanced the flexibility of the SALS blend with Glycerine. XRD of samples confirmed the amorphous nature of SALS blends with Gly, which influences the flexibility of the blend. The blends are further investigated for morphology using SEM to test their compatibility with the drug.

Science of, and insights into, thermodynamic principles for dermal formulations

Studies have demonstrated the significant role of the thermodynamic activity of drugs in skin drug delivery. This thermodynamic activity works as a driving force for increasing/improving the absorption of drugs by the skin. It can be changed according to the physicochemical parameters (e.g., solubility, partition coefficient, and water activity) of the drug in the vehicle. Thermodynamic principles have been used for the development of novel topical and transdermal delivery systems, demonstrating the importance of thermodynamic activity in enhancing drug permeation through the skin. In this review, we provide insights into thermodynamic principles and their roles in optimizing topical and transdermal drug delivery systems.

Towards best use and regulatory acceptance of generic physiologically based kinetic (PBK) models for in vitro-to-in vivo extrapolation (IVIVE) in chemical risk assessment

With an increasing need to incorporate new approach methodologies (NAMs) in chemical risk assessment and the concomitant need to phase out animal testing, the interpretation of in vitro assay readouts for quantitative hazard characterisation becomes more important. Physiologically based kinetic (PBK) models, which simulate the fate of chemicals in tissues of the body, play an essential role in extrapolating in vitro effect concentrations to in vivo bioequivalent exposures. As PBK-based testing approaches evolve, it will become essential to standardise PBK modelling approaches towards a consensus approach that can be used in quantitative in vitro-to-in vivo extrapolation (QIVIVE) studies for regulatory chemical risk assessment based on in vitro assays. Based on results of an ECETOC expert workshop, steps are recommended that can improve regulatory adoption: (1) define context and implementation, taking into consideration model complexity for building fit-for-purpose PBK models, (2) harmonise physiological input parameters and their distribution and define criteria for quality chemical-specific parameters, especially in the absence of in vivo data, (3) apply Good Modelling Practices (GMP) to achieve transparency and design a stepwise approach for PBK model development for risk assessors, (4) evaluate model predictions using alternatives to in vivo PK data including read-across approaches, (5) use case studies to facilitate discussions between modellers and regulators of chemical risk assessment. Proof-of-concepts of generic PBK modelling approaches are published in the scientific literature at an increasing rate. Working on the previously proposed steps is, therefore, needed to gain confidence in PBK modelling approaches for regulatory use.

Design of Montelukast Nanocrystalline Suspension for Parenteral Prolonged Delivery

Background

Montelukast (MTK), a representative leukotriene receptor antagonist, is currently being investigated as a potential candidate for treating Alzheimer’s disease. For potent and effective dosing in elderly patients, a parenteral prolonged delivery system is favored, with improved medication adherence with reduced dosage frequency.

Purpose

This study aimed to design a nanocrystalline suspension (NS)-based MTK prolonged delivery system and evaluate its pharmacokinetics profile and local tolerability following subcutaneous administration.

Methods

To decelerate the dissolution rate, the amorphous MTK raw material was transformed into a crystalline state using a solvent-mediated transformation method and subsequently formulated into NS using a bead-milling technique. The MTK NSs were characterized by morphology, particle size, crystallinity, and in vitro dissolution profiles. The pharmacokinetic profile and local tolerability at the injection site following subcutaneous injection of MTK suspension were evaluated in rats.

Results

Microscopic and physical characterization revealed that the amorphous MTK powder was lucratively transformed into a crystalline form in acidic media (pH 4). MTK crystalline suspensions with different diameters (200 nm, 500 nm, and 3 μm) were uniformly prepared using bead-milling technology, employing polysorbate 80 as suspending agent. Prepared crystalline suspensions exhibited analogous crystallinity (melting point, 150°C) and size-dependent in vitro dissolution profiles. MTK NSs with particle sizes of 200 nm and 500 nm provided a protracted pharmacokinetic profile for up to 4 weeks in rats, with a higher maximum drug concentration in plasma than the 3 μm-sized injectable suspensions. Histopathological examination revealed that MTK NS caused chronic granulomatous inflammation at the injection site, which resolved after 4 weeks.

Conclusion

The MTK parenteral NS delivery system is expected to be a valuable tool for treating Alzheimer’s disease with extended dose intervals.

Nanocrystals for controlled delivery: State of the art and approved drug products

INTRODUCTION

Controlled/extended-release formulations offer numerous benefits over conventional especially reduced side effects, improved therapeutic outcomes and high patient compliance. Controlled release nanocrystal is extremely versatile technology with several advantages such as very high drug loading, ease of manufacturing, avoidance of dose dumping, reproducible drug release. Usually, nanonization of drug is performed to improve dissolution rate, intrinsic solubility and thereby bioavailability. Most of the times, this is done for immediate release dosage forms where objective is quick onset of action. However, nanocrystals can also provide a sustained, reproducible plasma concentration profile for weeks to months based on tissue microenvironment, surface coating administration route.

AREAS COVERED

This review briefly describes the methods for producing nanocrystals, summarizes preclinical research and commercial products demonstrating tremendous potential of controlled release nanocrystals.

EXPERT OPINION

Lipophilic drugs are attractive candidates for the development of nanocrystal based controlled release formulations. However, constraint should be practiced while generalizing the technology for the controlled release purpose. Not all drugs fit in the requirement from the perspectives of physicochemical properties or pharmacokinetic requirements. Additionally, technologies should be explored which can convert the nanocrystal into its final dosage form for administration yet preserves the benefits of small particle size and controlled release.

Next-generation engineered nanogold for multimodal cancer therapy and imaging: a clinical perspectives

Cancer is one of the significant threats to human life. Although various latest technologies are currently available to treat cancer, it still accounts for millions of death each year worldwide. Thus, creating a need for more developed and novel technologies to combat this deadly condition. Nanoparticles-based cancer therapeutics have offered a promising approach to treat cancer effectively while minimizing adverse events. Among various nanoparticles, nanogold (AuNPs) are biocompatible and have proved their efficiency in treating cancer because they can reach tumors via enhanced permeability and retention effect. The size and shape of the AuNPs are responsible for their diverse therapeutic behavior. Thus, to modulate their therapeutic values, the AuNPs can be synthesized in various shapes, such as spheres, cages, flowers, shells, prisms, rods, clusters, etc. Also, attaching AuNPs with single or multiple targeting agents can facilitate the active targeting of AuNPs to the tumor tissue. The AuNPs have been much explored for photothermal therapy (PTT) to treat cancer. In addition to PTT, AuNPs-based nanoplatforms have been investigated for combinational multimodal therapies in the last few years, including photodynamic therapy, chemotherapy, radiotherapy, immunotherapy, etc., to ablate cancer cells. Thus, the present review focuses on the recent advancements in the functionalization of AuNPs-based nanoconstructs for cancer imaging and therapy using combinatorial multimodal approaches to treat various cancers.

Novel Hydrogels for Topical Applications: An Updated Comprehensive Review Based on Source

Active pharmaceutical ingredients (API) or drugs are normally not delivered as pure chemical substances (for the prevention or the treatment of any diseases). APIs are still generally administered in prepared formulations, also known as dosage forms. Topical administration is widely used to deliver therapeutic agents locally because it is convenient and cost-effective. Since earlier civilizations, several types of topical semi-solid dosage forms have been commonly used in healthcare society to treat various skin diseases. A topical drug delivery system is designed primarily to treat local diseases by applying therapeutic agents to surface level parts of the body such as the skin, eyes, nose, and vaginal cavity. Nowadays, novel semi-solids can be used safely in pediatrics, geriatrics, and pregnant women without the possibility of causing any allergy reactions. The novel hydrogels are being used in a wide range of applications. At first, numerous hydrogel research studies were carried out by simply adding various APIs in pure form or dissolved in various solvents to the prepared hydrogel base. However, numerous research articles on novel hydrogels have been published in the last five to ten years. It is expected that novel hydrogels will be capable of controlling the APIs release pattern. Novel hydrogels are made up of novel formulations such as nanoparticles, nanoemulsions, microemulsions, liposomes, self-nano emulsifying drug delivery systems, cubosomes, and so on. This review focus on some novel formulations incorporated in the hydrogel prepared with natural and synthetic polymers.

Effect of particle size on in vivo performances of long-acting injectable drug suspension

Herein, entecavir-3-palmitate (EV-P), an ester prodrug of entecavir (EV), was employed as a model drug, and the effect of drug particle size on in vivo pharmacokinetic profiles and local inflammatory responses, and those associations were evaluated following intramuscular (IM) injection. EV-P crystals with different median diameters (0.8, 2.3, 6.3, 15.3 and 22.6 μm) were prepared using the anti-solvent crystallization method, with analogous surface charges (-10.7 ~ -4.7 mV), and crystallinity (melting point, 160-170 °C). EV-P particles showed size-dependent in vitro dissolution profiles under sink conditions, exhibiting a high correlation between the median diameter and Hixon-Crowell's release rate constant (r² = 0.94). Following IM injection in rats (1.44 mg/kg as EV), the pharmacokinetic profile of EV exhibited marked size-dependency; 0.8 μm-sized EV-P particles about 1.6-, 3.6-, and 5.6-folds higher systemic exposure, compared to 6.3, 15.3, and 22.6 μm-sized particles, respectively. This pharmacokinetic pattern, depending on particle size, was also highly associated with histopathological responses in the injected tissue. The smaller EV-P particles (0.8 or 2.3 μm) imparted the larger inflammatory lesion after 3 days, lower infiltration of inflammatory cells, and thinner fibroblastic bands around depots after 4 weeks. Conversely, severe fibrous isolation with increasing particle size augmented the drug remaining at injection site over 4 weeks, impeding the dissolution and systemic exposure. These findings regarding the effects of formulation variable on the in vivo behaviors of long-acting injectable suspension, provide constructive knowledge toward the improved design in poorly water-soluble compounds.

High-Payload Nanosuspension of Centella asiatica Extract for Improved Skin Delivery with No Irritation

Background

The titrated extract of Centella asiatica (CA) has received much attention as a cosmeceutical ingredient owing to its anti-wrinkle effect. However, due to the low solubility and high molecular weight of pharmacologically active constituents, including asiatic acid (AA), madecassic acid (MA), and asiaticoside (AS), it is challenging to fabricate high-payload topical preparations of CA with satisfactory skin absorption profiles.

Purpose

This study aimed to design a high-payload topical preparation of CA using nanocrystallization technique and to evaluate its skin absorption profile and local tolerability.

Methods

High-payload nanocrystal suspensions (NSs) were prepared using lab-scale bead-milling technology, by adjusting the type and amount of suspending agent, CA content, type of vehicle, and milling speed. CA-loaded NSs were characterized in terms of morphology, particle size, crystallinity, and in vitro dissolution pattern. Skin absorption of CA nanocrystals was evaluated using a vertical Franz diffusion cell mounted with porcine skin. In vivo skin irritation following topical application of high-payload NS was assessed in normal rats.

Results

The optimized NS system, composed of 10% (w/v) CA, 0.5% polyvinylpyrrolidone (PVP) K30 as steric stabilizer, and 89.5% of distilled water, was characterized as follows: spherical or elliptical in shape, 200 nm in size, with low crystallinity. The in vitro dissolution of AA or MA from NSs was markedly faster compared to raw material, under sink condition. Penetration of AA, MA, and AS in the porcine skin was markedly elevated using the high-payload NS formula, providing 5-, 4-, and 4.5-fold higher accumulation in skin layer, compared to that of the marketed cream formula (CA 1%, Madeca cream). Moreover, topical application of high-payload NS was tolerable, showing neither erythema nor oedema in normal rats.

Conclusion

The novel NS system is expected to be a virtuous approach for offering a better skin absorption of CA, without using an excess quantity of solubilizers.

Fabrication of pure-drug microneedles for delivery of montelukast sodium

Dissolving microneedle (MN) patches are usually formulated with a blend of drug and excipients added for mechanical strength and drug stabilization. In this study, we developed MNs made of pure drug to maximize drug loading capacity. MN patches were fabricated for transdermal delivery of montelukast sodium (MS) which is used to treat asthma and allergic rhinitis. We developed three different fabrication methods - solvent casting, melt casting, and solvent washing - and determined that filling molds with MS powder followed by a solvent washing method enabled MS to be loaded selectively to the MNs. Drug localization was confirmed with Raman imaging. MNs were able to penetrate in vitro and ex vivo skin models, and maintained strong mechanical properties during 6 months' storage at 22 °C. MS was also stable and compatible with the formulation used for the patch backing layer after 3 months' storage at 40 °C. MS delivery efficiency into skin was 55%, which enabled delivery of 3.2 mg MS into porcine skin ex vivo, which is in the range of MS doses in human clinical use. We conclude that the solvent washing method can be used to prepare MNs containing pure drug, such as MS at milligram doses in a ~ 1 cm² MN patch.

Artificial intelligence to deep learning: machine intelligence approach for drug discovery

Drug designing and development is an important area of research for pharmaceutical companies and chemical scientists. However, low efficacy, off-target delivery, time consumption, and high cost impose a hurdle and challenges that impact drug design and discovery. Further, complex and big data from genomics, proteomics, microarray data, and clinical trials also impose an obstacle in the drug discovery pipeline. Artificial intelligence and machine learning technology play a crucial role in drug discovery and development. In other words, artificial neural networks and deep learning algorithms have modernized the area. Machine learning and deep learning algorithms have been implemented in several drug discovery processes such as peptide synthesis, structure-based virtual screening, ligand-based virtual screening, toxicity prediction, drug monitoring and release, pharmacophore modeling, quantitative structure-activity relationship, drug repositioning, polypharmacology, and physiochemical activity. Evidence from the past strengthens the implementation of artificial intelligence and deep learning in this field. Moreover, novel data mining, curation, and management techniques provided critical support to recently developed modeling algorithms. In summary, artificial intelligence and deep learning advancements provide an excellent opportunity for rational drug design and discovery process, which will eventually impact mankind. The primary concern associated with drug design and development is time consumption and production cost. Further, inefficiency, inaccurate target delivery, and inappropriate dosage are other hurdles that inhibit the process of drug delivery and development. With advancements in technology, computer-aided drug design integrating artificial intelligence algorithms can eliminate the challenges and hurdles of traditional drug design and development. Artificial intelligence is referred to as superset comprising machine learning, whereas machine learning comprises supervised learning, unsupervised learning, and reinforcement learning. Further, deep learning, a subset of machine learning, has been extensively implemented in drug design and development. The artificial neural network, deep neural network, support vector machines, classification and regression, generative adversarial networks, symbolic learning, and meta-learning are examples of the algorithms applied to the drug design and discovery process. Artificial intelligence has been applied to different areas of drug design and development process, such as from peptide synthesis to molecule design, virtual screening to molecular docking, quantitative structure-activity relationship to drug repositioning, protein misfolding to protein-protein interactions, and molecular pathway identification to polypharmacology. Artificial intelligence principles have been applied to the classification of active and inactive, monitoring drug release, pre-clinical and clinical development, primary and secondary drug screening, biomarker development, pharmaceutical manufacturing, bioactivity identification and physiochemical properties, prediction of toxicity, and identification of mode of action.

Montelukast microsuspension with hypromellose for improved stability and oral absorption

Oral montelukast (MTK) is prescribed to treat asthma or rhinitis, and is clinically investigated as new medication in the treatment of Alzheimer's dementia. Herein, in order to better patient's compliance, microsuspensions (MSs)-based oral liquid preparations of montelukast (MTK) were formulated with polymeric suspending agents including hypromellose (HPMC), and those drug-polymer interaction, physicochemical stability, dissolution, and in vivo pharmacokinetic profile was evaluated. When amorphous MTK particle was suspended in aqueous vehicle, it was readily converted into crystalline form and grown into aggregates, drastically lowering dissolution rate. However, the addition of HPMC polymer markedly suppressed the crystal growth, providing both improved drug stability and profound dissolution profile. Raman spectrometry denoted the inter-molecular hydrogen boding between MTK particle and HPMC polymer. The crystal growth or dissolution profile of MSs was markedly affected by pharmaceutical additives (sucrose or simethicone) in the preparations or storage temperature. The optimized HPMC-based MS exhibited over 80% higher bioavailability, compared to marketed granule (Singulair®) in rats. Therefore, novel MTK-loaded MS can be a promising liquid preparation, bettering oral absorption and patient's compliance.

Fabrication of Montelukast sodium loaded filaments and 3D printing transdermal patches onto packaging material

The main objectives of this work were to develop and characterize new 3D printing filaments and print them directly onto a packaging material. Different blends of polymers were tested to achieve low-temperature printing filaments, which are flexible and durable to be wound onto spools. The mechanical properties of filaments were compared with commercial filaments and evaluated by bending tests. Kollidon 12PF, PEG 4000, and PEO 900k blends resulted in promising filaments that could be extruded at 70 °C and had flexibility similar to commercial PLA filaments. Montelukast sodium (MS), which undergoes hepatic first-pass metabolism, was compounded into polymer blends, and drug-loaded filaments were extruded. All filaments were tested with a 3D printing pen prior to using with the 3D printer for transdermal patches. MS loaded filaments and patches showed similar flexibility with placebo. In vitro drug release studies showed 52% of MS was released in 24 h. Printing on disposable packaging material is presented for the first time with this study. Build plate adhesion and cohesion of 3D printed layers were successfully achieved. This new technique could prevent cross-contamination, save time, and provide ease of use, which can take us one step closer to the production of personalized drugs in pharmacies.

Toxicokinetics and toxicodynamics of the fentanyl homologs cyclopropanoyl-1-benzyl-4´-fluoro-4-anilinopiperidine and furanoyl-1-benzyl-4-anilinopiperidine

The two fentanyl homologs cyclopropanoyl-1-benzyl-4´-fluoro-4-anilinopiperidine (4F-Cy-BAP) and furanoyl-1-benzyl-4-anilinopiperidine (Fu-BAP) have recently been seized as new psychoactive substances (NPS) on the drugs of abuse market. As their toxicokinetic and toxicodynamic characteristics are completely unknown, this study focused on elucidating their in vitro metabolic stability in pooled human liver S9 fraction (pHLS9), their qualitative in vitro (pHLS9), and in vivo (zebrafish larvae) metabolism, and their in vitro isozyme mapping using recombinant expressed isoenzymes. Their maximum-tolerated concentration (MTC) in zebrafish larvae was studied from 0.01 to 100 µM. Their µ-opioid receptor (MOR) activity was analyzed in engineered human embryonic kidney (HEK) 293 T cells. In total, seven phase I and one phase II metabolites of 4F-Cy-BAP and 15 phase I and four phase II metabolites of Fu-BAP were tentatively identified by means of liquid chromatography high-resolution tandem mass spectrometry, with the majority detected in zebrafish larvae. N-Dealkylation, N-deacylation, hydroxylation, and N-oxidation were the most abundant metabolic reactions and the corresponding metabolites are expected to be promising analytical targets for toxicological analysis. Isozyme mapping revealed the main involvement of CYP3A4 in the phase I metabolism of 4F-Cy-BAP and in terms of Fu-BAP additionally CYP2D6. Therefore, drug-drug interactions by CYP3A4 inhibition may cause elevated drug levels and unwanted adverse effects. MTC experiments revealed malformations and changes in the behavior of larvae after exposure to 100 µM Fu-BAP. Both substances were only able to produce a weak activation of MOR and although toxic effects based on MOR activation seem unlikely, activity at other receptors cannot be excluded.