Salt Cocrystal of Diclofenac Sodium-L-Proline: Structural, Pseudopolymorphism, and Pharmaceutics Performance Study

Structural, Spectroscopic, and Docking Analysis of N,O-Donor Ligand Metal Complex Nanoparticles With Hypolipidemic Effects via Lipoprotein Lipase Activation in High-Fat Diet Mice

New Cd(II), Zn(II), and Cu(II) chelates with cetirizine.2HCl (CETZ.2HCl) in incidence of 1,10 phenanthroline monohydrate (Phen.H2O) were synthesized in search of new biologically active compounds. The ligands and their chelates were described by 1H NMR, FT-IR, elemental analysis, UV-vis spectrophotometry, thermal analyses, molar conductance, x-ray diffraction (XRD), and magnetic-susceptibility measurements. FT-IR demonstrated that CETZ.2HCl is bonded with metal ions, as a monodentate via carboxylate oxygen atom and Phen.H2O chelated via two nitrogen atoms. The molar conductivity data showed that the complexes were nonelectrolytes, whereas XRD data supported that the compounds were crystalline. Density functional theory (DFT) was utilized to gain insight into the compounds' optimized design. The effects of CETZ.2HCl and the complexes on the activity of lipoprotein-(L)-lipase in mice were investigated. Unlike Cd(II) complex, all the other compounds exhibited significant increase in lipase activity, with reduction in triglycerides. Cu(II) and Zn(II) complexes showed robust hypolipidemic efficacy evidenced by lower levels of total cholesterol and low-density lipoprotein (LDL), concomitant with higher levels of high-density lipoprotein (HDL). Furthermore, Zn(II) complex was a safe alternative as it has a lower liver toxicity. Molecular docking demonstrated that Cu(II) and Zn(II) chelates exhibited greater affinities to lipase than the parent ligand. Finally, Cu(II) complex showed the highest antibacterial activity.

Development of a New Salt of Piperine with Toluene Sulfonic Acid and Its Anti-Inflammation Effect In Vivo

Piperine (PPN) is a natural compound with an anti-inflammation effect and low solubility. Hence, some molecular modifications have improved its solid-state character, including cocrystal formation. However, the salt structure has yet to be widely studied. In this research, PPN was reacted with toluene sulfonic acid (TSA), which was expected to increase its solubility and anti-inflammatory effects. This experiment used solid-state reactions and analysis, including thermal analysis, infrared spectroscopy, and powder X-ray diffractometry, to characterize the new multicomponent solid phase. Next, single crystal R-ray diffractometry was used to determine the final three-dimensional conformation structure. After that, the salt, which can be reproduced by wet grinding, was tested for improved stability and anti-inflammatory effects. As a result, the PPN-TSA multicomponent solid was confirmed as a solid salt with monoclinic packing, exhibiting better solubility and anti-inflammation effects. Thus, this new organic salt has the potential for further phytochemical compound development.

Current Perspectives on Development and Applications of Cocrystals in the Pharmaceutical and Medical Domain

In recent years, the design of pharmaceutical cocrystals has garnered significant attention. The process of cocrystallization offers a remarkable opportunity to develop drug products with enhanced properties such as improved stability, solubility, hygroscopicity, dissolution rate, and bioavailability. This detailed review delves into this evolving area, thereby exploring its relevance in pharmaceutical formulation by defining cocrystals and their practical applications and also by discussing methods for their preparation as well as characterization. It also contrasts traditional and innovative techniques for cocrystal formation. Historically, cocrystals have been synthesized using methods like solvent evaporation, grinding, and slurry techniques; however, each has its own set of limitations under specific conditions. The latest trends in cocrystal formation lean toward more advanced approaches such as spray-drying, hot melt extrusion, and supercritical fluid technology, as well as the cutting-edge technique of laser irradiation. The aim behind developing new methods is not just to address the limitations of traditional cocrystallization techniques but also to streamline the process by introducing simpler steps and enabling a continuous production workflow for cocrystal products. In general, this full-length review article offers a report on various techniques available for the creation of pharmaceutical cocrystals, along with the methods for their evaluation. Moreover, it includes reporting developments and diverse applications of cocrystals along with the commercially available cocrystals in the pharmaceutical as well as medical domains.

Piperine-hydroxybenzoate as phytochemistry antiosteoarthritis combination: Structural, solubility, and in vivo antiinflammatory study

This study discusses the composition and structure determination of a new multicomponent system from antiinflammatory natural ingredients, consisting of piperine (Pip) and 4-hydroxybenzoic acid (HBA), named Pip-HBA. In addition, this research studied its solubility and anti-inflammatory activity. After screening the stoichiometric proportions, this multicomponent system formation reaction was carried out using the solvent-dropped grinding and evaporation methods. Characterizations using solid analysis including differential scanning calorimetry (DSC), powder X-ray diffractometry (PXRD), and Fourier transform infrared spectroscopy (FTIR), confirmed the formation of Pip-HBA. These multicomponent systems showed different thermograms and diffractograms. Furthermore, the FTIR spectrum of Pip-HBA multicomponent system differs from the physical mixture and its constituent components. Single crystal diffractometry (SCXRD) determined Pip-HBA to be a new multicomponent system structure in three dimensions. Pip-HBA showed increased solubility and anti-inflammatory activity compared to single piperine. Therefore, Pip-HBA multicomponent system has quite potential for further preparation development.

A Metformin-Ferulic Acid Salt with Improved Biopharmaceutical Parameters

Though ferulic acid presents great hypoglycemic potential, it possesses limited aqueous solubility, and low oral bioavailability. When associated with metformin, the first-choice drug in Type 2 diabetes treatment, FA demonstrates synergistic hypoglycemic effects, however, it also causes certain undesirable dose-related effects. This study aimed to develop a new ferulic acid - metformin multicomponent system, and incorporate it into a solid dosage form with improved biopharmaceutical parameters. A novel metformin: ferulate (1:1) salt (MFS) was produced, which was properly characterized using differing analytical techniques, including single crystal analysis. Also during the course of the study, a new polymorph of the metformin free base was observed. The MFS was obtained using solvent evaporation methods, which achieved high yields in reproducible process, as well as a 740-fold increase in ferulic acid aqueous solubility. The MFS tablets developed met quality control requirements for this dosage form, as well as revealing excellent performance in vitro dissolution tests, presenting dissolution efficiency values of 95.4 ± 0.5%. Additionally, physicochemical instability was not observed in a study at 40 °C for 3 months for both MFS powder and its tablet form. The MFS product developed is a promising candidate for further Type 2 diabetes clinical study.

The Benefits and Challenges of Antibiotics-Non-Steroidal Anti-Inflammatory Drugs Non-Covalent Reaction

Recently, non-covalent reactions have emerged as approaches to improve the physicochemical properties of active pharmaceutical ingredients (API), including antibiotics and non-steroidal anti-inflammatory drugs (NSAIDs). This review aimed to present and discuss the non-covalent reaction products of antibiotics, including salt and neutral multi-component solid forms, by framing their substituents and molar ratios, manufacturing techniques, characterization methods, benefits, potency changes, and toxicity, and is completed with an analysis of the development of computational models used in this field. Based on the data, NSAIDs are the most-developed drugs in multi-component system preparations, followed by antibiotics, i.e., antituberculosis and fluoroquinolones. They have reacted with inorganic elements, excipients, nutraceuticals, natural products, and other drugs. However, in terms of treatments for common infections, fluoroquinolones are more frequently used. Generally, NSAIDs are acquired on an over-the-counter basis, causing inappropriate medication. In addition, the pKa differences between the two groups of medicine offer the potential for them to react non-covalently. Hence, this review highlights fluoroquinolone-NSAID multi-component solid systems, which offer some benefits. These systems can increase patient compliance and promote the appropriate monitoring of drug usage; the dual drug multi-component solids have been proven to improve the physicochemical properties of one or both components, especially in terms of solubility and stability. In addition, some reports show an enhancement of the antibiotic activity of the products. However, it is important to consider the possibility of activity changes, interaction, and toxicity when using drug combinations. Hence, these aspects also are discussed in this review. Finally, we present computational modeling, which has been utilized broadly to support multi-component system designs, including coformer screening, preparation methods, and structural modeling, as well as to predict physicochemical properties, potency, and toxicity. This integrated review is expected to be useful for further antibiotic-NSAID multi-component system development.

Non-Covalent Reactions Supporting Antiviral Development

Viruses are the current big enemy of the world's healthcare systems. As the small infector causes various deadly diseases, from influenza and HIV to COVID-19, the virus continues to evolve from one type to its mutants. Therefore, the development of antivirals demands tremendous attention and resources for drug researchers around the world. Active pharmaceutical ingredients (API) development includes discovering new drug compounds and developing existing ones. However, to innovate a new antiviral takes a very long time to test its safety and effectiveness, from structure modeling to synthesis, and then requires various stages of clinical trials. Meanwhile, developing the existing API can be more efficient because it reduces many development stages. One approach in this effort is to modify the solid structures to improve their physicochemical properties and enhance their activity. This review discusses antiviral multicomponent systems under the research phase and has been marketed. The discussion includes the types of antivirals, their counterpart compound, screening, manufacturing methods, multicomponent systems yielded, characterization methods, physicochemical properties, and their effects on their pharmacological activities. It is hoped that the opportunities and challenges of solid antiviral drug modifications can be drawn in this review as important information for further antiviral development.

Complexation: An Interesting Pathway for Combining Two APIs at the Solid State

Combining different drugs into a single crystal form is one of the current challenges in crystal engineering, with the number of reported multi-drug solid forms remaining limited. This paper builds upon an efficient approach to combining Active Pharmaceutical Ingredients (APIs) containing carboxylic groups in their structure with APIs containing pyridine moieties. By transforming the former into their zinc salts, they can be successfully combined with the pyridine-containing APIs. This work highlights the successfulness of this approach, as well as the improvement in the physical properties of the obtained solid forms.

Towards the Development of Novel Diclofenac Multicomponent Pharmaceutical Solids

Multicomponent pharmaceutical materials offer new opportunities to address drug physicochemical issues and to obtain improved drug formulation, especially on oral administration drugs. This work reports three new multicomponent pharmaceutical crystals of the non-steroidal anti-inflammatory drug diclofenac and the nucleobases adenine, cytosine, and isocytosine. They have been synthesized by mechanochemical methods and been characterized in-depth in solid-state by powder and single crystal X-ray diffraction, as well as other techniques such as thermal analyses and infrared spectroscopy. Stability and solubility tests were also performed on these materials. This work aimed to evaluate the physicochemical properties of these solid forms, which revealed thermal stability improvement. Dissociation of the new phases was observed in water, though. This fact is consistent with the reported observed layered structures and BFDH morphology calculations.

New Organic Salt from Levofloxacin-Citric Acid: What Is the Impact on the Stability and Antibiotic Potency?

This research dealt with the composition, structure determination, stability, and antibiotic potency of a novel organic salt composed of levofloxacin (LF) and citric acid (CA), named levofloxacin-citrate (LC). After a stoichiometric proportion screening, the antibiotic-antioxidant reaction was conducted by slow and fast evaporation methods. A series of characterizations using thermal analysis, powder X-ray diffractometry, vibrational spectroscopy, and nuclear magnetic resonance confirmed LC formation. The new organic salt showed a distinct thermogram and diffractogram. Next, Fourier transform infrared indicated the change in N-methylamine and carboxylic stretching, confirmed by ¹H nuclear magnetic resonance spectra to elucidate the 2D structure. Finally, single-crystal diffractometry determined LC as a new salt structure three-dimensionally. The attributive improvements were demonstrated on the stability toward the humidity and lighting of LC compared to LF alone. Moreover, the antibiotic potency of LF against Staphylococcus aureus (Gram-positive) and Escherichia coli (Gram-negative) enhanced ~1.5–2-fold by LC. Hereafter, LC is a potential salt antibiotic-antioxidant combination for dosage formulas development.

Structural Characterization of Multicomponent Crystals Formed from Diclofenac and Acridines

Multicomponent crystals containing diclofenac and acridine (1) and diclofenac and 6,9-diamino-2-ethoxyacridine (2) were synthesized and structurally characterized. The single-crystal XRD measurements showed that compound 1 crystallizes in the triclinic P-1 space group as a salt cocrystal with one acridinium cation, one diclofenac anion, and one diclofenac molecule in the asymmetric unit, whereas compound 2 crystallizes in the triclinic P-1 space group as an ethanol solvate monohydrate salt with one 6,9-diamino-2-ethoxyacridinium cation, one diclofenac anion, one ethanol molecule, and one water molecule in the asymmetric unit. In the crystals of the title compounds, diclofenac and acridines ions and solvent molecules interact via N–H⋯O, O–H⋯O, and C–H⋯O hydrogen bonds, as well as C–H⋯π and π–π interactions, and form heterotetramer bis[⋯cation⋯anion⋯] (1) or heterohexamer bis[⋯cation⋯ethanol⋯anion⋯] (2). Moreover, in the crystal of compound 1, acridine cations and diclofenac anions interact via N–H⋯O hydrogen bond, C–H⋯π and π–π interactions to produce blocks, while diclofenac molecules interact via C–Cl⋯π interactions to form columns. In the crystal of compound 2, the ethacridine cations interact via C–H⋯π and π–π interactions building blocks, while diclofenac anions interact via π–π interactions to form columns.

A Novel Carbon Dots/Thermo-Sensitive In Situ Gel for a Composite Ocular Drug Delivery System: Characterization, Ex-Vivo Imaging, and In Vivo Evaluation

We developed a potential composite ocular drug delivery system for the topical administration of diclofenac sodium (DS). The novel carbon dot CD_C-HP was synthesized by the pyrolysis of hyaluronic acid and carboxymethyl chitosan through a one-step hydrothermal method and then embedded in a thermosensitive in situ gel of poloxamer 407 and poloxamer 188 through swelling loading. The physicochemical characteristics of these carbon dots were investigated. The results of the in vitro release test showed that this composite ocular drug delivery system (DS-CD_C-HP-Gel) exhibited sustained release for 12 h. The study of the ex vivo fluorescence distribution in ocular tissues showed that it could be used for bioimaging and tracing in ocular tissues and prolong precorneal retention. Elimination profiles in tears corresponded to the study of ex vivo fluorescence imaging. The area under the curve of DS in the aqueous humor in the DS-CD_C-HP-Gel group was 3.45-fold that in the DS eye drops group, indicating a longer precorneal retention time. DS-CD_C-HP with a positive charge and combined with a thermosensitive in situ gel might strengthen adherence to the corneal surface and prolong the ocular surface retention time to improve the bioavailability. This composite ocular delivery system possesses potential applications in ocular imaging and drug delivery.

Challenges and Progress in Nonsteroidal Anti-Inflammatory Drugs Co-Crystal Development

Co-crystal innovation is an opportunity in drug development for both scientists and industry. In line with the “green pharmacy” concept for obtaining safer methods and advanced pharmaceutical products, co-crystallization is one of the most promising approaches to find novel patent drugs, including non-steroidal anti-inflammatory drugs (NSAID). This kind of multi-component system improves previously poor physicochemical and mechanical properties through non-covalent interactions. Practically, there are many challenges to find commercially viable co-crystal drugs. The difficulty in selecting co-formers becomes the primary problem, followed by unexpected results, such as decreased solubility and dissolution, spring and parachute effect, microenvironment pH effects, changes in instability, and polymorphisms, which can occur during the co-crystal development. However, over time, NSAID co-crystals have been continuously updated regarding co-formers selection and methods development.

Experimental investigation of ternary mixture of diclofenac sodium with pharmaceutical excipients

The goal of this work was the study of drug-excipient interactions of ternary mixtures between diclofenac sodium when introduced with excipients commonly explored in solid dosage formulas such as microcrystalline cellulose and stearic acid obtained by three methods. Differential scanning calorimetry (DSC) (DSC), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and the structural characterization technique of diffraction (XRPD) were used to investigate the characterization and potential physical and chemical interactions of solid products of diclofenac sodium with excipients prepared by different methods. This work revealed a possible interaction between diclofenac sodium, microcrystalline cellulose, and stearic acid in mixture prepared by microwave irradiation also; it was found compatibility for ternary mixtures prepared by physical mixture and co evaporation methods. Results of this study can be useful in the development of the method of preparation and select adequate excipients with suitable compatibility.

New Sodium Mefenamate - Nicotinamide Multicomponent Crystal Development to Modulate Solubility and Dissolution: Preparation, Structural, and Performance Study

A cocrystal of mefenamic acid (MA) - nicotinamide (NA) has been reported to increase the solubility of MA, but it still does not exceed the solubility of sodium mefenamate (SM). Accordingly, this research dealt with a new salt cocrystal arrangement of SM - NA. Cocrystal screening was performed, followed by powder and single-crystal preparation. Solvent drop grinding and slow evaporation at cold and ambient temperatures were employed to produce the multicomponent crystal. Two new salt cocrystals were found as hemihydrates and monohydrates, named SMN-HH and SMN-MH, respectively. SMN-MH single crystals were successfully isolated and structurally analyzed using a single crystal X-ray diffractometer. Pharmaceutical properties were investigated, including hydrate stability, solubility, and intrinsic dissolution. The experiments showed that the hemihydrate was stable under ambient humidity and temperature, and that the monohydrate rapidly changed to hemihydrate. Both hydrates improved the solubility and intrinsic dissolution of SM, but SMN-HH was superior. The data showed that SMN salt cocrystals combine the advantages of salt and cocrystals and show potential for dosage form development.

Amino Acids as the Potential Co-Former for Co-Crystal Development: A Review

Co-crystals are one of the most popular ways to modify the physicochemical properties of active pharmaceutical ingredients (API) without changing pharmacological activity through non-covalent interactions with one or more co-formers. A "green method" has recently prompted many researchers to develop solvent-free techniques or minimize solvents for arranging the eco-friendlier process of co-crystallization. Researchers have also been looking for less-risk co-formers that produce the desired API's physicochemical properties. This review purposed to collect the report studies of amino acids as the safe co-former and explored their advantages. Structurally, amino acids are promising co-former candidates as they have functional groups that can form hydrogen bonds and increase stability through zwitterionic moieties, which support strong interactions. The co-crystals and deep eutectic solvent yielded from this natural compound have been proven to improve pharmaceutical performance. For example, l-glutamine could reduce the side effects of mesalamine through an acid-base stabilizing effect in the gastrointestinal fluid. In addition, some amino acids, especially l-proline, enhances API's solubility and absorption in its natural deep eutectic solvent and co-crystals systems. Moreover, some ionic co-crystals of amino acids have also been designed to increase chiral resolution. Therefore, amino acids are safe potential co-formers, which are suitable for improving the physicochemical properties of API and prospective to be developed further in the dosage formula and solid-state syntheses.

Cashew Gum Polysaccharide Nanoparticles Grafted with Polypropylene Glycol as Carriers for Diclofenac Sodium

This investigation focuses on the development and optimization of cashew gum polysaccharide (CGP) nanoparticles grafted with polypropylene glycol (PPG) as carriers for diclofenac sodium. The optimization of parameters affecting nanoparticles formulation was performed using a central composite rotatable design (CCRD). It was demonstrated that the best formulation was achieved when 10 mg of CGP was mixed with 10 μL of PPG and homogenized at 22,000 rpm for 15 min. The physicochemical characterization evidenced that diclofenac was efficiently entrapped, as increases in the thermal stability of the drug were observed. The CGP-PPG@diclofenac nanoparticles showed a globular shape, with smooth surfaces, a hydrodynamic diameter around 275 nm, a polydispersity index (PDI) of 0.342, and a zeta potential of -5.98 mV. The kinetic studies evidenced that diclofenac release followed an anomalous transport mechanism, with a sustained release up to 68 h. These results indicated that CGP-PPG nanoparticles are an effective material for the loading/release of drugs with similar structures to diclofenac sodium.

A Review of Pharmaceutical Nano-Cocrystals: A Novel Strategy to Improve the Chemical and Physical Properties for Poorly Soluble Drugs

Nowadays, many commercial drugs have poor solubility and bioavailability. Cocrystals are formulated to modulate active pharmaceutical ingredients’ properties with improved solubility, dissolution, and bioavailability compared to their pristine individual components in the pharmaceutical industry. Nano-cocrystals, crystals in the nano range, can further enhance these properties because of not only the cocrystal structure, but also the large surface to volume ratio of nanocrystals. Even though there are many studies on cocrystals, the research of pharmaceutical nano-cocrystals is still in the initial stage. Thus, it is necessary to conduct a systematic study on pharmaceutical nano-cocrystals. In this review, the possible preparation approaches of nano-cocrystals have been reported. To have a comprehensive understanding of nano-cocrystals, some analytical techniques and characterizations will be discussed in detail. In addition, the feasible therapeutic application of nano-cocrystals will be presented. This work is expected to provide guidance to develop new nano-cocrystals with commercial value in the pharmaceutical industry.

Improving the Solubility, Dissolution, and Bioavailability of Metronidazole via Cocrystallization with Ethyl Gallate

Metronidazole (MTZ) is an antibacterial drug widely used for the treatment of protozoan and anaerobic infections in humans and animals. However, its low bioavailability necessitates the frequent administration of a high dose to attain an effective plasma concentration profile for therapy. To reduce the dose of MTZ, we have prepared a new cocrystal between MTZ and ethyl gallate (EG). The solid-state properties of MTZ-EG were characterized using complimentary techniques, including thermal, spectroscopic, microscopic, and X-ray crystallographic methods. The MTZ-EG cocrystal exhibits a higher solubility and faster dissolution than MTZ. The bioavailability of MTZ in rats was increased by 36% when MTZ-EG was used.