Quality by Design Based Formulation Study of Meloxicam-Loaded Polymeric Micelles for Intranasal Administration

Construction of Cisplatin-18-Crown-6 Complexes Through Supramolecular Chemistry to Improve Solubility, Stability, and Antitumor Activity

Cisplatin (DDP), a platinum-chelated compound renowned for its antitumor activity, is often utilized in cancer therapy. However, its real-world clinical efficacy is compromised by poor solubility and low stability, which impedes wider clinical application. Our study aimed to address these limitations of DDP through host-guest supramolecular chemistry approaches. We explored the potential of 18-crown-6 as the host molecule to solubilize and stabilize DDP, the guest molecule. Utilizing techniques such as UV-visible spectroscopy, Fourier-transform infrared spectroscopy, Raman spectroscopy, and molecular docking, we conducted a comprehensive analysis on the physical state and inclusion mode of the DDP@18-crown-6 complex. Phase solubility studies and Job's plot confirmed that the DDP@18-crown-6 complex significantly enhanced the aqueous solubility of DDP, with an optimal 1:1 binding ratio. Stability analyses revealed that this complex markedly improved the stability of DDP in pure water. Meanwhile, the stabilization effects of DDP@18-crown-6 were remarkably elevated when combined with 0.9% sodium chloride. In vitro antitumor assays in A549 cell lines demonstrated that the DDP@18-crown-6 complex outperformed raw DDP in cytotoxicity, showing a significantly lower IC50 value. This research offered a promising strategy for DDP solubilization and stabilization, facilitating its anticancer therapeutic efficacy.

Impact of Storage on In Vitro Permeation and Mucoadhesion Setup Experiments Using Swine Nasal Mucosa

Intranasal topical administration offers a promising route for local and systemic drug delivery, with in vitro permeation and mucoadhesion studies often using porcine models. However, the impact of storage on mucosal integrity after the procedure remains unaddressed. This study aimed to standardize the preparation process and evaluated whether storage of porcine nasal mucosa impairs its integrity and permeability for experimental comparisons. Additionally, an optimized in vitro mucoadhesion experiment using texture analyzer equipment was investigated. Porcine nasal mucosa was subjected to different storage conditions ("fresh"; refrigerated at 4°C for 24 h and 48 h, and frozen at -20°C for two or three weeks) and assessed using optical and transmission electron microscopy. In vitro permeation assays were performed in a Franz-type vertical diffusion system with lidocaine hydrochloride (LDC). In vitro mucoadhesion assays were conducted using fresh nasal mucosa and a commercial nasal topical formulation using TA.XT. Plus texture analyzer. The variables involved (probe speed, contact time, and application force) in assessing mucoadhesive capacity (maximum mucoadhesive force Fmax and work of mucoadhesion Wmuc) were optimized using a Central Composite Design. Fresh tissues showed no alterations in histological arrangement or in the ultrastructure of adherence junctions. Stored tissues exhibited histological disorganization, reduced thickness, and loss of epithelial integrity. LDC permeability increased in storage tissues (p < 0.05). Contact force had a positive effect on Fmax and Wmuc (p < 0.0001), with a minimum required value of 0.48 N. Variations in contact time and probe speed did not affect the responses (p > 0.05). In conclusion, the preparation technique was adequate to maintain mucosa integrity for permeability studies. However, storing the mucosa at 4 or -20°C overestimated LDC permeation, which could mislead critical data for formulation development. Therefore, the use of fresh mucosa is recommended to ensure more reliable results. For in vitro mucoadhesion assays, a minimum contact force of 0.48N is required for optimal responses.

Mucoadhesive in situ nasal gel of amoxicillin trihydrate for improved local delivery: Ex vivo mucosal permeation and retention studies

Orally administered amoxicillin is recommended as the first-line treatment of acute bacterial rhinosinusitis (ABR) and given in a high-dose regimen. However, the risk of various systemic adverse reactions and low oral bioavailability are unbearable, increasing the threat of antibiotic resistance. Therefore, nasal delivery of amoxicillin can be a potential approach for effectively treating ABR locally, as well as overcoming those drawbacks. In a way to guarantee the effectiveness for local therapy in nasal cavity, the permeation and retention properties are of significant importance considerations. Accordingly, the present work aimed to investigate the characteristics with respect to the nasal applicability of the in situ gelling amoxicillin trihydrate (AMT) and further evaluate its permeability and retention properties through human nasal mucosa. The lyophilized formulations were characterized utilizing the Differential Scanning Calorimetry (DSC) and X-ray Powder Diffraction (XRPD), and also evaluated for its polarity, reconstitution time, droplet size distribution, mucoadhesive properties, and ex vivo permeability and retention studies. The results confirmed that the in situ gelling AMT formulations possess adequate mucoadhesive behavior, especially the formulation containing 0.3 % of gellan gum. Substantially, the in situ gelling AMT formulations were able to retain the drug on the surface of nasal mucosa instead of permeating across the membrane; thus, suitable for treating nasal infections locally. Altogether, the in situ gelling systems demonstrates promising abilities as a delivery platform to enhance local application of AMT within the nasal cavity.

Recent progress in nanoparticulate-based intranasal delivery for treating of different central nervous system diseases

Drug administration to the central nervous system (CNS) has become a great obstacle because of several biological barriers, such as the blood-brain barrier, therefore, brain targeting insights are a light for scientists to move forward for treating neurogenerative diseases using advanced non-invasive methods. The current demand is to use a potential direct route as the nasal administration to transport drugs into the brain enhancing the BBB permeability and hence, increasing the bioavailability. Interestingly, recent techniques have been implanted in formulating nanocarriers-based therapeutics for targeting and treating ischemic stroke using lipid or polymeric-based materials. Nanoparticulate delivery systems are set as an effective platform for brain targeting as polymeric nanoparticles and polymeric micelles or nanocarriers based on lipids for preventing drug efflux to promote optimal therapeutic medication concentration in the brain-diseased site. In recent years, there has been a notable increase in research publications and ongoing investigations on the utilization of drug-loading nanocarriers for the treatment of diverse CNS diseases. This review comprehensively depicts these dangerous neurological disorders, drug targeting challenges to CNS, and potential contributions as novel intranasal nano-formulations are being used to treat and regulate a variety of neurological diseases.

Technological Strategies Applied to Pharmaceutical Systems for Intranasal Administration of Drugs Intended for Neurological Treatments: A Review

The complexity of treating neurological diseases has meant that new strategies have had to be developed to deliver drugs to the brain more efficiently and safely. Intranasal drug delivery is characterized by its ease of administration, safety, and rapid delivery directly from the nose to the brain. Several strategies have been developed to improve the delivery of drugs to the brain via nasal administration. These include the use of mucoadhesive and thermoresponsive polymers and their combination into polymer blends, as well as the use of liposomes, niosomes, and nano- and microemulsions. Therefore, this review focuses on technologies for developing pharmaceutical systems aimed at delivery via the nose to the brain, contributing to new treatments for difficult neurological disorders. Some of the most common and difficult-to-treat neurological conditions, the intranasal route of administration, and the anatomy of the nasal cavity have been discussed, as well as factors that may influence the absorption of drugs administered into the nose. The types of intranasal formulations and the devices that can be used to administer these products are also discussed in this review. Strategies for improving the transport of bioactive agents and increasing bioavailability are highlighted. The technologies discussed in this review can facilitate the development of formulations with improved properties, such as drug release and mucoadhesiveness, which have several advantages for patients requiring complex neurological treatments.

Preparation of Ibuprofen-Loaded Inhalable γCD-MOFs by Freeze-Drying Using the QbD Approach

BACKGROUND/OBJECTIVES

Research on cyclodextrin-based metal-organic frameworks (CD-MOFs) is still in its infancy, but their potential for use in drug delivery-expressly in the lung-seems promising. We aimed to use the freeze-drying method to create a novel approach for preparing CD-MOFs. MOFs consisting of γ-cyclodextrin (γCD) and potassium cations (K+) were employed to encapsulate the poorly water-soluble model drug Ibuprofen (IBU) for the treatment of cystic fibrosis (CF).

METHODS

Using the LeanQbD® software (v2022), we designed the experiments based on the Quality by Design (QbD) concept. According to QbD, we identified the three most critical factors, which were the molar ratio of the IBU to the γCD, incubation time, and the percentage of the organic solvent. light-, scanning electron microscope (SEM) and laser diffraction were utilized to observe the morphology and particle size of the samples. In addition, the products were characterized by Differential Scanning Calorimetry (DSC), X-ray Powder Diffraction (XRPD), Fourier Transform Infrared Spectroscopy (FT-IR) and nuclear magnetic resonance spectroscopy (NMR).

RESULTS

Based on characterizations, we concluded that a γCD-MOF/IBU complex was also formed using the freeze-drying method. Using formulations with optimal aerodynamic properties, we achieved 38.10 ± 5.06 and 47.18 ± 4.18 Fine Particle Fraction% (FPF%) based on the Andersen Cascade Impactor measurement. With these formulations, we achieved a fast dissolution profile and increased IBU solubility.

CONCLUSIONS

This research successfully demonstrates the innovative use of freeze-drying to produce γCD-MOFs for inhalable IBU delivery. The method enabled to modify the particle size, which was crucial for successful pulmonary intake, emphasizing the need for further investigation of these formulations as effective delivery systems.

Risperidone-Loaded Nasal Thermosensitive Polymeric Micelles: Quality by Design-Based Formulation Study

The current research aims to develop thermosensitive polymeric micelles loaded with risperidone for nasal administration, emphasizing the added benefits of their thermosensitive behavior under nasal conditions. An initial risk assessment facilitated the advanced development process, confirming that the key indicators of thermosensitivity were suitable for nasal application. The polymeric micelles exhibited an average size of 118.4 ± 3.1 nm at ambient temperature and a size of 20.47 ± 1.2 nm at 36.5 °C, in both cases in monodisperse distribution. Factors such as pH and viscosity did not significantly impact these parameters, demonstrating appropriate nasal applicability. The model formulations showed a rapid, burst-like drug release profile in vitro, accompanied by a quick and high permeation rate at nasal conditions. Overall, the Quality by Design-based risk assessment process led to the development of an advanced drug delivery system capable of administering risperidone through the nasal cavity.

QbD Approach-Based Preparation and Optimization of Hydrophobic Ion-Pairing Complex of Lysozyme with Sodium Dodecyl Sulphate to Enhance Stability in Lipid-Based Carriers

Hydrophobic ion pairing (HIP) complexation was found to be an efficient approach in modulating the release and enhancing the stability and encapsulation of hydrophilic macromolecules such as proteins in hydrophobic nano/microcarriers. The present work strives to develop and optimize the preparation of the HIP complex of the antimicrobial enzyme lysozyme (LYZ) with the ion-pairing agent (IPA) sodium dodecyl sulphate (SDS) relying on the quality-by-design (QbD) approach. The quality target product profile (QTPP) includes the achievement of maximal lipophilicity in a reversible manner to enable the maintenance of biological activity. The related critical quality attributes (CQAs) were defined as complexation efficacy, complex stability, enzyme recovery and activity. Three risk assessment (RA) tools were used to identify and rank the critical process parameters (CPPs) and critical material attributes (CMAs). From this assessment, the pH of the medium, LYZ:SDS molar ratio and drying conditions were determined as high-risk factors that need to be investigated. To the best of our knowledge, for the first time, electrostatic titration was used as a smart approach to determine the optimum molar ratio at different pH values. Based on the predefined CQAs, pH 8 with an LYZ/SDS molar ratio of 1:8 was found to be the optimal condition for complexation efficiency and recovery (%) of a biologically active enzyme. A cost-effective drying process based on a ventilated oven was developed, which resulted in complex qualities comparable to those obtained by the commonly used freeze-drying method. In a nutshell, the optimum conditions for the preparation of the LYZ/SDS HIP complex were efficiently facilitated by the rational application of QbD principles and the utilization of efficient electrostatic titration and ventilated oven-drying methods.

Nasal Delivery to the Brain: Harnessing Nanoparticles for Effective Drug Transport

The nose-to-brain drug-delivery system has emerged as a promising strategy to overcome the challenges associated with conventional drug administration for central nervous system disorders. This emerging field is driven by the anatomical advantages of the nasal route, enabling the direct transport of drugs from the nasal cavity to the brain, thereby circumventing the blood-brain barrier. This review highlights the significance of the anatomical features of the nasal cavity, emphasizing its high permeability and rich blood supply that facilitate rapid drug absorption and onset of action, rendering it a promising domain for neurological therapeutics. Exploring recent developments and innovations in different nanocarriers such as liposomes, polymeric nanoparticles, solid lipid nanoparticles, dendrimers, micelles, nanoemulsions, nanosuspensions, carbon nanotubes, mesoporous silica nanoparticles, and nanogels unveils their diverse functions in improving drug-delivery efficiency and targeting specificity within this system. To minimize the potential risk of nanoparticle-induced toxicity in the nasal mucosa, this article also delves into the latest advancements in the formulation strategies commonly involving surface modifications, incorporating cutting-edge materials, the adjustment of particle properties, and the development of novel formulations to improve drug stability, release kinetics, and targeting specificity. These approaches aim to enhance drug absorption while minimizing adverse effects. These strategies hold the potential to catalyze the advancement of safer and more efficient nose-to-brain drug-delivery systems, consequently revolutionizing treatments for neurological disorders. This review provides a valuable resource for researchers, clinicians, and pharmaceutical-industry professionals seeking to advance the development of effective and safe therapies for central nervous system disorders.

Versatile Nanoparticulate Systems as a Prosperous Platform for Targeted Nose-Brain Drug Delivery

The intranasal route has proven to be a reliable and promising route for delivering therapeutics to the central nervous system (CNS), averting the blood-brain barrier (BBB) and avoiding extensive first-pass metabolism of some drugs, with minimal systemic exposure. This is considered to be the main problem associated with other routes of drug delivery such as oral, parenteral, and transdermal, among other administration methods. The intranasal route maximizes drug bioavailability, particularly those susceptible to enzymatic degradation such as peptides and proteins. This review will stipulate an overview of the intranasal route as a channel for drug delivery, including its benefits and drawbacks, as well as different mechanisms of CNS drug targeting using nanoparticulate drug delivery systems devices; it also focuses on pharmaceutical dosage forms such as drops, sprays, or gels via the nasal route comprising different polymers, absorption promoters, CNS ligands, and permeation enhancers.

Formulation and investigation of hydrogels containing an increased level of diclofenac sodium using risk assessment tools

Transdermal delivery of active ingredients is a challenge for pharmaceutical technology due to their inadequate penetration properties and the barrier function of the skin. The necessity of painless, effective, topical therapy for the aging population is growing, and a variety of diclofenac sodium-containing semi-solid preparations are available to alleviate the symptoms of these ailments. Our purpose was to formulate a novel composition with higher drug content to enhance drug release and permeation, thereby providing more effective therapy. Another goal was to maintain the concentration of the organic solvent mixture below 30%, to protect the skin barrier. Firstly, literature and market research were conducted, based on which the appropriate excipients for the target formulation were selected. Solubility tests were conducted with binary and ternary mixtures. As a result, the optimal ternary mixture was chosen. Hydrogels containing 1, 5, and 7% of diclofenac sodium were prepared and the stability of the formulations were studied by microscopic measurements and cytotoxicity test were carried out of the components also. The release and permeation of diclofenac sodium were investigated in different concentrations. It can be concluded that we have succeeded in preparing a topically applicable stable diclofenac sodium hydrogel with higher concentration, drug release, and improved skin permeation than the formulations available on the market.

Associations between the use of common nonsteroidal anti-inflammatory drugs, genetic susceptibility and dementia in participants with chronic pain: A prospective study based on 194,758 participants from the UK Biobank

OBJECTIVE

To investigate the potential relationship between common nonsteroidal anti-inflammatory drugs (NSAIDs), genetic susceptibility and all-cause dementia (ACD), Alzheimer's disease (AD), and vascular dementia (VD) among individuals experiencing chronic pain.

METHODS

This study was based on 194,758 chronic pain participants form UK biobank with a median follow-up of 13.7 years. Participants were categorized into different NSAIDs painkiller regimen groups: No NSAIDs group, Aspirin group, Ibuprofen group, Paracetamol group, and 2-3 NSAIDs group. Cox proportional risk models were used to examine the correlation between regular NSAIDs usage and the risk of ACD, AD, and VD. In addition, we further performed subgroup analyses and sensitivity analyses.

RESULTS

1) Compared to the No NSAIDs group, the aspirin group (HR = 1.12, 95% CI:1.01-1.24, P < 0.05), the paracetamol group (HR = 1.15, 95% CI:1.05-1.27, P < 0.01), and the 2-3 NSAIDs group (HR = 1.2, 95% CI:1.08-1.33, P < 0.05) showed a higher risk of ACD. Furthermore, the 2-3 NSAIDs group was also associated with a higher risk of VD (HR = 1.39, 95% CI: 1.08-1.33, P < 0.05). 2) At high dementia GRS participants with chronic pain, the paracetamol group (HR = 1.2, 95% CI: 1.03-1.43, P < 0.05) and the NSAIDs group (HR = 1.3, 95% CI: 1.07-1.59, P < 0.05) were associated with a higher risk of ACD compared to the no painkiller group. 3) There was no significant association between ibuprofen use and higher risk of dementia.

CONCLUSION

In individuals with chronic pain, the use of aspirin and paracetamol was associated with a higher risk of ACD, whereas the use of ibuprofen was not significantly associated with a higher risk of ACD.

Preparation and Optimization of Bovine Serum Albumin Nanoparticles as a Promising Gelling System for Enhanced Nasal Drug Administration

Bovine serum albumin (BSA) has been used extensively as a suitable carrier system for alternative drug delivery routes, such as nasal administration. However, the optimization of BSA nanoparticles with respect to their nasal applicability has not been widely studied. The present study focuses on the characterization of BSA nanoparticles prepared using the desolvation method, followed by a gelation process to facilitate intranasal drug delivery. The results demonstrated that the ratio of BSA and the desolvating agent, ethanol, played a critical role in the nanoparticle characteristics of the BSA nanogel matrices (BSA-NGs). Based on the gelling properties, the formulations of BSA-NG 2, BSA-NG 4, and BSA-NG 6 were selected for further investigation. The Raman spectra confirmed that there were no specific changes to the secondary structures of the BSA. The mucoadhesion studies revealed moderately high mucoadhesive properties, with a mucin binding efficiency (MBE) value of around 67%, allowing the dose to avoid elimination due to rapid mucociliary clearance of the nasal passage. Via studying the nexus of the carrier system, BSA-NGs loaded with dexamethasone as a model drug were prepared and evaluated by differential scanning calorimetry (DSC) and thermal gravimetry (TG), ascertaining that no ethanol remained in the samples after the freeze-drying process. Furthermore, the viscosity measurements exhibited moderate viscosity, which is suitable for nasal liquid preparations. The in vitro release studies performed with a simulated nasal electrolyte solution (SNES) medium showed 88.15-95.47% drug release within 4 h. In conclusion, BSA nanoparticle gelling matrices can offer potential, value-added drug delivery carriers for improved nasal drug administration.

Soluplus® promotes efficient transport of meloxicam to the central nervous system via nasal administration

In our present series of experiments, we investigated the nasal applicability of the previously developed Soluplus® - meloxicam polymeric micelle formulation. Utilizing the nasal drug investigations, moderately high mucoadhesion was experienced in nasal conditions which alongside the appropriate physicochemical properties in liquid state, contributed to rapid drug absorption through human RPMI 2650 cell line. Ex vivo studies also confirmed that higher nasal mucosal permeation could be expected with the polymeric micelle nanoformulation compared to a regular MEL suspension. Also, the nanoformulation met the requirements to provide rapid drug permeation in less 1 h of our measurement. The non-toxic, non-cell barrier damaging formulation also proved to provide a successful passive transport across excides human nasal mucosa. Based on our in vivo investigations, it can be concluded that the polymeric micelle formulation provides higher meloxicam transport to the central nervous system followed by a slow and long-lasting elimination process compared to prior results where physical particle size reduction methods were applied. With these results, a promising solution and nanocarrier is proposed for the successful transport of non-steroidal anti-inflammatory drugs with acidic character to the brain.

Nano-Spray-Dried Levocetirizine Dihydrochloride with Mucoadhesive Carriers and Cyclodextrins for Nasal Administration

Antihistamines such as levocetirizine dihydrochloride (LC) are commercially used in oral tablets and oral drops to reduce allergic symptoms. In this study, LC was nano-spray-dried using three mucoadhesive polymers and four cyclodextrin species to form composite powders for nasal administration. The product was composed of hydroxypropyl methylcellulose polymer, including LC as a zwitterion, after neutralization by NaOH, and XRD investigations verified its amorphous state. This and a sulfobutylated-beta-cyclodextrin sodium salt-containing sample showed crystal peaks due to NaCl content as products of the neutralization reaction in the solutions before drying. The average particle size of the spherical microparticles was between 2.42 and 3.44 µm, except for those containing a polyvinyl alcohol excipient, which were characterized by a medium diameter of 29.80 µm. The drug was completely and immediately liberated from all the samples at pH 5.6 and 32 °C; i.e., the carriers did not change the good dissolution behavior of LC. A permeability test was carried out by dipping the synthetic cellulose ester membrane in isopropyl myristate using modified horizontal diffusion cells. The spray-dried powder with β-cyclodextrin showed the highest permeability (188.37 µg/cm²/h), as this additive was the least hydrophilic. Products prepared with other cyclodextrins (randomly methylated-beta-cyclodextrin, sulfobutylated-beta-cyclodextrin sodium salt and (hydroxypropyl)-beta-cyclodextrin) showed similar or slightly higher penetration abilities than LC. Other polymer excipients resulted in lower penetration of the active agent than the pure LC.

Development and Evaluation of a Novel Diammonium Glycyrrhizinate Phytosome for Nasal Vaccination

The objective of the present research was to formulate diammonium glycyrrhizinate (DG) into phytosomes (DG-P) to induce nasal immune responses and enhance absorption. Plackett- Burman design was used for process optimization, incorporating specific formulation and process variables to obtain the optimal parameters. Fourier transform infrared spectroscopy (FTIR), X-ray power diffraction (P-XRD), and transmission electron microscopy (TEM) were used for characterization. The adjuvant activity of the DG-P was evaluated by using bone marrow dendritic cells. In vitro nasal mucosal permeation and in situ nasal perfusion were also investigated to evaluate nasal absorption. The DG phytosomes were in the size range of 20~30 nm and zeta-potential range of −30~−40 mV. DG-P demonstrated 4.2-fold increased solubility in n-octanol. Coculturing bone marrow dendritic cells with DG-P led to enhanced dendritic cell maturation. Apparent permeability coefficient of the phytosomal formulation was almost four times higher than that of free DG determined by ex vivo permeation studies on excised porcine mucosa. In situ nasal perfusion studies in rats demonstrated that the nasal absorption of DG-P was significantly higher than that of free DG. Conclusively, the results confirmed that DG-P have potential for use as an adjuvant for nasal vaccine.

Mucoadhesive meloxicam-loaded nanoemulsions: Development, characterization and nasal applicability studies

Intranasally administered non-steroidal anti-inflammatory drugs (NSAIDs) offer an innovative opportunity in the field of pain management. Combination of the nasal physiological advantages such as the rich vascularization and large absorption area along with novel nanomedical formulations can fulfill all the necessary criteria of an advanced drug delivery system. Nanoemulsions represent a versatile formulation approach suitable for nasal drug delivery by increasing the absorption and the bioavailability of many drugs for systemic and nose-to-brain delivery due to their stability, small droplet size and optimal solubilization properties. In this study we aimed to develop meloxicam (MX)-loaded mucoadhesive nanoemulsions and to investigate the nasal applicability of the optimized formulations. Our results indicated the optimized nanoemulsion formulation (MX-NE3) had a droplet size of 158.5 nm in monodisperse droplet size distribution (polydispersity index of 0.211). The surface charge was -11.2 mV, which helped with the colloidal stability upon dilution at simulated nasal conditions and storage. The high encapsulation efficiency (79.2%) mediated a 15-fold drug release and a 3-fold permeability increase at nasal conditions compared to the initial MX. Proper wetting properties associated with high mucoadhesion prosper the increased residence time on the surface of the nasal mucosa. No cytotoxic effect of the formulations was observed on NIH/3T3 mouse embryonic fibroblast cell lines, which supports the safe nasal applicability.

Lipid-Based Nanocarriers for Neurological Disorders: A Review of the State-of-the-Art and Therapeutic Success to Date

Neurodegenerative disorders including Alzheimer's, Parkinson's, and dementia are chronic and advanced diseases that are associated with loss of neurons and other related pathologies. Furthermore, these disorders involve structural and functional defections of the blood-brain barrier (BBB). Consequently, advances in medicines and therapeutics have led to a better appreciation of various pathways associated with the development of neurodegenerative disorders, thus focusing on drug discovery and research for targeted drug therapy to the central nervous system (CNS). Although the BBB functions as a shield to prevent toxins in the blood from reaching the brain, drug delivery to the CNS is hindered by its presence. Owing to this, various formulation approaches, including the use of lipid-based nanocarriers, have been proposed to address shortcomings related to BBB permeation in CNS-targeted therapy, thus showing the potential of these carriers for translation into clinical use. Nevertheless, to date, none of these nanocarriers has been granted market authorization following the successful completion of all stages of clinical trials. While the aforementioned benefits of using lipid-based carriers underscores the need to fast-track their translational development into clinical practice, technological advances need to be initiated to achieve appropriate capacity for scale-up and the production of affordable dosage forms.

Utilization of Polymeric Micelles as a Lucrative Platform for Efficient Brain Deposition of Olanzapine as an Antischizophrenic Drug via Intranasal Delivery

Schizophrenia is a mental disorder characterized by alterations in cognition, behavior and emotions. Oral olanzapine (OZ) administration is extensively metabolized (~up to 40% of the administrated dose). In addition, OZ is a P-glycoproteins substrate that impairs the blood–brain barrier (BBB) permeability. To direct OZ to the brain and to minimize its systemic side effects, the nasal pathway is recommended. OZ-loaded polymeric micelles nano-carriers were developed using suitable biodegradable excipients. The developed micelles were physicochemically investigated to assess their appropriateness for intranasal delivery and the potential of these carriers for OZ brain targeting. The selected formula will be examined in vivo for improving the anti-schizophrenic effects on a schizophrenia rat model. The binary mixture of P123/P407 has a low CMC (0.001326% w/v), which helps in maintaining the formed micelles’ stability upon dilution. The combination effect of P123, P407 and TPGS led to a decrease in micelle size, ranging between 37.5–47.55 nm and an increase in the EE% (ranging between 68.22–86.84%). The selected OZ–PM shows great stability expressed by a suitable negative charge zeta potential value (−15.11 ± 1.35 mV) and scattered non-aggregated spherical particles with a particle size range of 30–40 nm. OZ–PM maintains sustained drug release at the application site with no nasal cytotoxicity. In vivo administration of the selected OZ–PM formula reveals improved CNS targeting and anti-schizophrenia-related deficits after OZ nasal administration. Therefore, OZ–PM provided safe direct nose-to-brain transport of OZ after nasal administration with an efficient anti-schizophrenic effect.

Characterizing the Drug-Release Enhancement Effect of Surfactants on Megestrol-Acetate-Loaded Granules

In this study, the effect of Cremophor® RH 40 (CR 40) classic micelles and Soluplus® (SP) polymeric micelles were investigated on a novel granule-type drug-delivery system containing megestrolacetate (MGA). Using a risk assessment-based approach on the formulation via melt technology resulted in the formation of these granules, presented as the dosage, with proper particle size and flow characteristics. Due to the application of a eutectic carrier base composition, gentle process conditions were reached, retaining the crystalline structure of the carrier system and allowing for the proper distribution of MGA in the granules. The increased water solubility (0.111 mg/mL to 2.154 mg/mL), and the decreased nano particle size (102.27 nm) with uniform distribution (polydispersity index of 0.259) and colloid stability (zeta potential of −12.99 mV) resulted in SP polymeric micelles prevailing over CR 40 micelles in this gastric dissolution study, performed in biorelevant fasted and fed state drug-release media. Mathematical characterization and kinetic model fitting supported the fast drug-release mechanism of polymeric micelles over micelles. The value-added polymeric micelle-containing formulation developed can be successfully administered perorally and the enhanced drug release offers the possibility of greater drug absorption in the gastrointestinal tract.

Design of Oral Sustained-Release Pellets by Modeling and Simulation Approach to Improve Compliance for Repurposing Sobrerol

Sobrerol, an oral mucolytic agent, in a recent study showed promise for treating multiple sclerosis. A human equivalent dose of 486 mg of sobrerol administered thrice daily (i.e., 1459 mg of daily dose) demonstrated the highest therapeutic efficacy for repurposing use, which also points out the poor compliance of administration. In this study, oral sustained-release pellets of sobrerol were successfully developed with evaluated manufacturing conditions and drug release kinetics. For design of the target drug product, we used a modeling and simulation approach to establish a predictive model of oral pharmacokinetic profile, by exploring the characteristics and correlations corresponding to the pharmacokinetics and pharmacodynamics of sobrerol, such as absorption lag time (0.18 h), time-scaling in vitro–in vivo correlation (t_in-vitro = 0.494 t_in-vivo − 0.0904), gastrointestinal transit time (8 h), minimum effective concentration (1.61 μg/mL), and duration of action (12.8 h). Results showed that the frequency of administration and the daily dose remarkably reduced by 33.3% (i.e., from thrice to twice daily) and 22.8%, respectively, which indicates that this prototype approach can be adopted for rapidly developing a modified-release dosage form of sobrerol, with improvement of compliance of administration and therapeutic efficacy.

Serum Albumin Nanoparticles: Problems and Prospects

The present paper aims to summarize the results regarding serum albumin-based nanoparticles (NPs) for drug delivery purposes. In particular, it focuses on the relationship between their preparation techniques and synthesis parameters, as well as their successful clinical application. In spite of the huge amount of consumed material and immaterial sources and promising possibilities, products made from different types of albumin NPs, with the exception of a few, still have not been invented. In the present paper, promising applications of serum albumin nanoparticles (SANPs) for different biomedical purposes, such as carriers, delivery systems and contrast agents, are also discussed. The most frequent utilization of the NPs for certain diseases, i.e., cancer therapy, and future prospects are also detailed in this study.

Development of dexamethasone-loaded mixed polymeric micelles for nasal delivery

Our study aimed to formulate a novel dexamethasone (DXM)-loaded, mixed polymeric micelle-based drug delivery system, focusing on the auspicious nose-to-brain pathway, as a key delivery route to treat central nervous system (CNS) associated diseases. Polymeric micelles might be a solution to deliver drugs to the place of action compared to conventional formulations. Due to low Z-average (89.92 ± 2.7 nm), a polydispersity index of 0.216 ± 0.014 and high surface polarity (52.23%), a significant increase in water solubility (14-fold) was experienced. This increase resulted in favourable dissolution profile at nasal and axonal conditions with high in vitro permeability value (14.6×10^-6 cm/s) on polar brain (porcine) lipid extract. Modified Side-bi-side® type diffusion study confirmed rapid and efficient passive diffusion through the nasal mucosa contributed by strong mucoadhesive properties. The final formulation met all the requirements of a nasal drug delivery system with rapid onset of action, meaning DXM can reach the CNS and there it can exert its beneficial effects in pathological conditions.

Development and Characterization of n-Propyl Gallate Encapsulated Solid Lipid Nanoparticles-Loaded Hydrogel for Intranasal Delivery

The objective of the present study was to develop n-propyl gallate-loaded solid lipid nanoparticles (PG-SLNs) in a hydrogel (HG) formulation using Transcutol-P (TC-P) as a permeation enhancer. Modified solvent injection technique was applied to produce optimized PG-SLNs via the Quality by Design approach and central composite design. The in vitro mucoadhesion, scavenging activity, drug release, permeation studies of PG from PG-SLNs-loaded HG were evaluated under simulated nasal conditions. Compared with in vitro release behavior of PG from SLNs, the drug release from the PG-SLNs-loaded HG showed a lower burst effect and sustained release profile. The cumulative permeation of PG from PG-SLNs-loaded HG with TC-P was 600 μg/cm² within 60 min, which is 3–60-fold higher than PG-SLNs and native PG, respectively. Raman mapping showed that the distribution of PG-SLNs was more concentrated in HG having lower concentrations of hyaluronic acid. The scavenging assay demonstrated increased antioxidant activity at higher concentrations of HG. Due to enhanced stability and mucoadhesive properties, the developed HG-based SLNs can improve nasal absorption by increasing residence time on nasal mucosa. This study provides in vitro proof of the potential of combining the advantages of SLNs and HG for the intranasal delivery of antioxidants.

An Updated Risk Assessment as Part of the QbD-Based Liposome Design and Development

Liposomal formulation development is a challenging process. Certain factors have a critical influence on the characteristics of the liposomes, and even the relevant properties can vary based on the predefined interests of the research. In this paper, a Quality by Design-guided and Risk Assessment (RA)-based study was performed to determine the Critical Material Attributes and the Critical Process Parameters of an "intermediate" active pharmaceutical ingredient-free liposome formulation prepared via the thin-film hydration method, collect the Critical Quality Attributes of the future carrier system and show the process of narrowing a general initial RA for a specific case. The theoretical liposome design was proved through experimental models. The investigated critical factors covered the working temperature, the ratio between the wall-forming agents (phosphatidylcholine and cholesterol), the PEGylated phospholipid content (DPPE-PEG2000), the type of the hydration media (saline or phosphate-buffered saline solutions) and the cryoprotectants (glucose, sorbitol or trehalose). The characterisation results (size, surface charge, thermodynamic behaviours, formed structure and bonds) of the prepared liposomes supported the outcomes of the updated RA. The findings can be used as a basis for a particular study with specified circumstances.

A comparison study of lipid and polymeric nanoparticles in the nasal delivery of meloxicam: Formulation, characterization, and in vitro evaluation

With the increasingly widespread of central nervous system (CNS) disorders and the lack of sufficiently effective medication, meloxicam (MEL) has been reported as a possible medication for Alzheimer's disease (AD) management. Unfortunately, following the conventional application routes, the low brain bioavailability of MEL forms a significant limitation. The intranasal (IN) administration route is considered revolutionary for CNS medications delivery. The objective of the present study was to develop two types of nanocarriers, poly (lactic-co-glycolic acid) nanoparticles (PLGA NPs) and solid lipid nanoparticles (SLNs), for the IN delivery of MEL adapting the Quality by Design approach (QbD). Turning then to further enhance the optimized nanoformulation behavior by chitosan-coating. SLNs showed higher encapsulation efficacy (EE) and drug loading (DL) than PLGA NPs 87.26% (EE) and 2.67% (DL); 72.23% (EE) and 2.55% (DL), respectively. MEL encapsulated into the nanoformulations improved in vitro release, mucoadhesion, and permeation behavior compared to the native drug with greater superiority of chitosan-coated SLNs (C-SLNs). In vitro-in vivo correlation (IVIVC) results estimated a significant in vivo brain distribution of the nanoformulations compared to native MEL with estimated greater potential in the C-SLNs. Hence, MEL encapsulation into C-SLNs towards IN route can be promising in enhancing its brain bioavailability.

A holistic QBD approach to design galactose conjugated PLGA polymer and nanoparticles to catch macrophages during intestinal inflammation

Recruited macrophages in inflammation attract various ligand-receptor drug delivery approaches. Galactose bound nanocarriers are promising to catch macrophages because of surface-expressed macrophage galactose type-lectin-C (MGL-2) receptor. The present study reported fabrication of galactose conjugated PLGA (GAL-PLGA) polymer and nanoparticles under quality by design (QBD) approach to investigate macrophages targeting potential at inflamed intestine. GAL-PLGA nanoparticles were fabricated through O/W emulsion-evaporation method under QBD approach and Box-Behnken design. Obtained GAL-PLGA nanoparticles have optimum particle size (~118 nm), drug entrapment (87%) and zeta potential (-9.5). TGA, XPRD and FTIR confirmed stability and negate drug-polymer interactions. Further, nanoparticles have considerable hemocompatibility, biocompatibility and cellular uptake; macrophage uptake was inhibited by D-galactose confirming involvement of MGL-2. Moreover, drug retention studies in the DSS-colitis model provide background for potential of nanoparticles to target and reside inflamed intestine. It is concluded that GAL-PLGA nanoparticles are suitable platform to target macrophages at the inflamed intestine through oral route.

A Systematic, Knowledge Space-Based Proposal on Quality by Design-Driven Polymeric Micelle Development

Nanoparticle research and development for pharmaceuticals is a challenging task in the era of personalized medicine. Specialized and increased patient expectations and requirements for proper therapy adherence, as well as sustainable environment safety and toxicology topics raise the necessity of well designed, advanced and smart drug delivery systems on the market. These stakeholder expectations and social responsibility of pharma sector open the space and call new methods on the floor for new strategic development tools, like Quality by Design (QbD) thinking. The extended model, namely the R&D QbD proved to be useful in case of complex and/or high risk/expectations containing or aiming developments. This is the case when we formulate polymeric micelles as promising nanotherapeutics; the risk assessment and knowledge-based quality targeted QbD approach provides a promising tool to support the development process. Based on risk assessment, many factors pose great risk in the manufacturing process and affect the quality, efficacy and safety profile. The quality-driven strategic development pathway, based on deep prior knowledge and an involving iterative risk estimation and management phases has proven to be an adequate tool, being able to handle their sensitive stability issues and make them efficient therapeutic aids in case of several diseases.

Development of In Situ Gelling Meloxicam-Human Serum Albumin Nanoparticle Formulation for Nose-to-Brain Application

The aim of this study was to develop an intranasal in situ thermo-gelling meloxicam-human serum albumin (MEL-HSA) nanoparticulate formulation applying poloxamer 407 (P407), which can be administered in liquid state into the nostril, and to increase the resistance of the formulation against mucociliary clearance by sol-gel transition on the nasal mucosa, as well as to improve drug absorption. Nanoparticle characterization showed that formulations containing 12-15% w/w P407 met the requirements of intranasal administration. The Z-average (in the range of 180-304 nm), the narrow polydispersity index (PdI, from 0.193 to 0.328), the zeta potential (between -9.4 and -7.0 mV) and the hypotonic osmolality (200-278 mOsmol/L) of MEL-HSA nanoparticles predict enhanced drug absorption through the nasal mucosa. Based on the rheological, muco-adhesion, drug release and permeability studies, the 14% w/w P407 containing formulation (MEL-HSA-P14%) was considered as the optimized formulation, which allows enhanced permeability of MEL through blood-brain barrier-specific lipid fraction. Cell line studies showed no cell damage after 1-h treatment with MEL-HSA-P14% on RPMI 2650 human endothelial cells' moreover, enhanced permeation (four-fold) of MEL from MEL-HSA-P14% was observed in comparison to pure MEL. Overall, MEL-HSA-P14% can be promising for overcoming the challenges of nasal drug delivery.

Long chain fatty acids can form aggregates and affect the membrane integrity

Stearic acid (SA) and oleic acid (OA) which are inherently existing fatty acids (FAs) in the body can alter cell membrane function and interact with each other. However, discrepancies arise as to whether these effects are beneficial or harmful on the body. To resolve this ambiguity, there is a dire need to study how FAs can affect the etiology of diseases and their treatment. In this study, we aimed to investigate long chain FAs aggregation behaviors and their effects on membrane integrity and cell viability. We determined the critical aggregation concentration (CAC) of SA and OA (1110 μM and 300 μM, respectively which were less amount than that used in nanocarriers). In TEM images, hexagonal overlapped or fused structures of SA were seen, whereas quite small spherical clusters of OA were obtained. Membrane integrity assessments demonstrated that SA and OA at their own CAC and below could crack the lipid junctions on membrane mimicking systems. Moreover, they completely disrupt the membrane integrity above the CAC at pH 7.2. Cell viabilities on various cell lines were assessed after exposed to SA or OA aggregates. SA was more aggressive than OA on cell death in all cell lines. The effect of SA on PC3 cell lines was in a concentration-dependent manner. The effect of SA above CAC boosted the inhibition of cell viability. Furthermore, OA showed a proliferation effect on PC3 cells. Consequently, the aggregation behavior of FAs should be considered as a noteworthy factor in physiological functions.

Lipid-Based Nanocarriers for Ophthalmic Administration: Towards Experimental Design Implementation

Nanotherapeutics based on biocompatible lipid matrices allow for enhanced solubility of poorly soluble compounds in the treatment of ophthalmic diseases, overcoming the anatomical and physiological barriers present in the eye, which, despite the ease of access, remains strongly protected. Micro-/nanoemulsions, solid lipid nanoparticles (SLN) or nanostructured lipid carriers (NLC) combine liquid and/or solid lipids with surfactants, improving drug stability and ocular bioavailability. Current research and development approaches based on try-and-error methodologies are unable to easily fine-tune nanoparticle populations in order to overcome the numerous constraints of ocular administration routes, which is believed to hamper easy approval from regulatory agencies for these systems. The predictable quality and specifications of the product can be achieved through quality-by-design (QbD) implementation in both research and industrial environments, in contrast to the current quality-by-testing (QbT) framework. Mathematical modelling of the expected final nanoparticle characteristics by variation of operator-controllable variables of the process can be achieved through adequate statistical design-of-experiments (DoE) application. This multivariate approach allows for optimisation of drug delivery platforms, reducing research costs and time, while maximising the understanding of the production process. This review aims to highlight the latest efforts in implementing the design of experiments to produce optimised lipid-based nanocarriers intended for ophthalmic administration. A useful background and an overview of the different possible approaches are presented, serving as a starting point to introduce the design of experiments in current nanoparticle research.

Formulation and In Vitro and In Silico Characterization of "Nano-in-Micro" Dry Powder Inhalers Containing Meloxicam

Pulmonary delivery has high bioavailability, a large surface area for absorption, and limited drug degradation. Particle engineering is important to develop inhalable formulations to improve the therapeutic effect. In our work, the poorly water-soluble meloxicam (MX) was used as an active ingredient, which could be useful for the treatment of non-small cell lung cancer, cystic fibrosis, and chronic obstructive pulmonary disease. We aimed to produce inhalable “nano-in-micro” dry powder inhalers (DPIs) containing MX and additives (poly-vinyl-alcohol, leucine). We targeted the respiratory zone with the microcomposites and reached a higher drug concentration with the nanonized active ingredient. We did the following investigations: particle size analysis, morphology, density, interparticular interactions, crystallinity, in vitro dissolution, in vitro permeability, in vitro aerodynamics (Andersen cascade impactor), and in silico aerodynamics (stochastic lung model). We worked out a preparation method by combining wet milling and spray-drying. We produced spherical, 3–4 µm sized particles built up by MX nanoparticles. The increased surface area and amorphization improved the dissolution and diffusion of the MX. The formulations showed appropriate aerodynamical properties: 1.5–2.4 µm MMAD and 72–76% fine particle fraction (FPF) values. The in silico measurements proved the deposition in the deeper airways. The samples were suitable for the treatment of local lung diseases.

A Proposed Methodology for a Risk Assessment-Based Liposome Development Process

The requirements of a liposomal formulation vary depending on the pharmaceutical indication, the target patient population, and the corresponding route of administration. Different preparation methods require various material attributes (MAs) (properties and characteristics of the components) and process parameters (PPs) (settings of the preparation method). The identification of the quality target product profile for a liposome-based formulation, the critical quality attributes of the liposomes, and the possible MAs and PPs that may influence the key characteristics of the vesicles facilitates pharmaceutical research. Researchers can systematise their knowledge by using the quality by design (QbD) approach. The potential factors that influence the quality of the product can be collected and studied through a risk assessment process. In this paper, the requirements of a liposome formulation prepared via the thin-film hydration preparation technique are presented; furthermore, the possible factors that have an impact on the quality of the final product and have to be considered and specified during the development of a liposomal formulation are herein identified and collected. The understanding and the application of these elements of QbD in the pharmaceutical developments help to influence the quality, the achievements, and the success of the formulated product.