Development of In Situ Gelling Meloxicam-Human Serum Albumin Nanoparticle Formulation for Nose-to-Brain Application

Development, in vitro and ex vivo characterization of lamotrigine-loaded bovine serum albumin nanoparticles using QbD approach

The present study aimed to prepare and optimize lamotrigine-loaded bovine serum albumin nanoparticles (LAM-NP) using the Quality by Design (QbD) approach and to investigate both the in vitro and ex vivo effects of different cross-linking agents glutaraldehyde (GLUT), glucose (GLUC) and 1-(3-dimethylaminutesopropyl)-3-ethylcarbodiimide hydrochloride (EDC) on intranasal applicability. Cross-linked LAM-NP from EDC (NP-EDC-1) showed the lowest Z-average value (163.7 ± 1.9 nm) and drug encapsulation efficacy (EE%) of 97.31 ± 0.17%. The drug release of GLUC cross-linked LAM-NP (NP-GLUC-9), glutaraldehyde cross-linked LAM-NP (NP-GLUT-2), and NP-EDC-1 at blood circulation conditions was higher than the initial LAM. The results of the blood-brain barrier parallel artificial membrane permeability assay (BBB-PAMPA) showed an increase in the permeability of LAM through the BBB with NP-GLUC-9 and an increase in flux with all selected formulations. The ex vivo study showed that LAM diffusion from the selected formulations through the human nasal mucosa was higher than in case of initial LAM. The cytotoxicity study indicated that BSA-NP reduced LAM toxicity, and GLUC 9 mM and EDC 1 mg could be alternative cross-linking agents to avoid GLUT 2% v/v toxicity. Furthermore, permeability through Caco-2 cells showed that nasal epithelial transport/absorption of LAM was improved by using BSA-NPs. The use of BSA-NP may be a promising approach to enhance the solubility, permeability through BBB and decrease the frequency of dosing and adverse effects of LAM.

Mannitol-Leucine synergy in nanocrystal agglomerates for enhanced systemic delivery of inhaled Ketoprofen: Pharmacokinetics and safety in Ovalbumin-Sensitized rats

Pulmonary administration offers a promising needle-free approach for systemic delivery of nonsteroidal anti-inflammatory drugs (NSAIDs), improving bioavailability and reducing required doses. While mannitol and leucine are widely used in inhalation formulations, their potential to enhance systemic drug delivery via the pulmonary route remains largely unexplored. This study utilizes the nanocrystalline agglomerates (NCAs) approach to develop an inhalable NSAID formulation, with ketoprofen (KTP) as a model drug. Wet media milling and nano spray drying were employed for NCA fabrication, and the roles of mannitol and leucine were evaluated individually and in combination. Notably, their combination exhibited synergy, overcoming limitations observed with individual excipients. Mannitol-based sample (K1M) reduced aerosol performance by increasing the mass median aerodynamic diameter (MMAD) to 4.5 µm, whereas leucine-based sample (K1L) improved aerosolization but resulted in a low MMAD (<1 µm), suggesting a high tendency for exhalation. The combined mannitol-leucine formulation (K1ML) achieved optimal aerosol performance, balancing dispersibility and controlled deposition. K1ML also exhibited the fastest drug release (99 % in 5 min) and enhanced permeability across the alveolar barrier while maintaining biocompatibility. Pharmacokinetic analysis confirmed that inhaled K1ML provided superior bioavailability (AUC 73 µg·h/mL) compared to oral KTP nanosuspension (42 µg·h/mL) and raw KTP (9 µg·h/mL). Nonetheless, prolonged inhalation in asthmatic models (ovalbumin-sensitised rats) impaired pulmonary function, emphasizing the need for dose optimization. These findings demonstrate that the mannitol-leucine combination in NCAs enhances systemic NSAID delivery, optimizing both aerosol performance and bioavailability. Future studies should refine dosing strategies to ensure long-term safety and clinical feasibility.

Decoding TGR5: A comprehensive review of its impact on cerebral diseases

Currently, unraveling the enigmatic realm of drug targets for cerebral disorders poses a formidable challenge. Takeda G protein-coupled receptor 5 (TGR5), also known as G protein-coupled bile acid receptor 1, is a specific bile acid receptor. Widely distributed across various tissues, TGR5 orchestrates a myriad of biological functions encompassing inflammation, energy metabolism, fatty acid metabolism, immune responses, cellular proliferation, apoptosis, and beyond. Alongside its well-documented implications in liver diseases, obesity, type 2 diabetes, tumors, and cardiovascular diseases, a growing body of evidence accentuates the pivotal role of TGR5 in cerebral diseases. Thus, this comprehensive review aimed to scrutinize the current insights into the pathological mechanisms involving TGR5 in cerebral diseases, while contemplating its potential as a promising therapeutic target for cerebral diseases.

Nose-to-brain delivery of lithium via a sprayable in situ-forming hydrogel composed of chelating starch nanoparticles

While bipolar disorder patients can benefit from lithium therapy, high levels of lithium in the serum can induce undesirable systemic side effects. Intranasal (IN) lithium delivery offers a potential solution to this challenge given its potential to facilitate improved lithium transport to brain when delivered to the olfactory mucosa. Herein, a sprayable, in situ forming nanoparticle network hydrogel (NNH) based on Schiff base interactions between chelator-functionalized oxidized starch nanoparticles (SNPs) and carboxymethyl chitosan (CMCh) is reported that can be deployed within the nasal cavity to release ultra-small penetrative SNPs over time. Chelating functional groups including citrate, ethylenediaminetetraacetic acid, and pentetic acid are shown to bind a variety of cations including lithium, magnesium, and calcium, with chelation directly linked to enhancements in the gel mechanics even for monovalent lithium. The hydrogels show high in vitro cytocompatibility with mouse striatal neuron and human primary nasal cell lines. Effective IN delivery of lithium to the brain is demonstrated for the first time, with both solution-based and hydrogel-loaded lithium showing in vivo efficacy in an amphetamine-induced pre-clinical rat bipolar manic phase model; specifically, IN-delivered NNHs can maintain successful attenuation of locomotor activity for up to 6 h while all other tested treatments (drug-only IN or conventional intraperitoneal delivery) failed to retain attenuation for more than two hours at the same lithium dose. As such, in situ-gelling and ion-chelating NNHs represent a new material that can effectively enable metal ion management in biomedical applications.

Evaluation of Drug Permeation Enhancement by Using In Vitro and Ex Vivo Models

Drugs administered by means of extravascular routes of drug administration must be absorbed into the systemic circulation, which involves the movement of the drug molecules across biological barriers such as epithelial cells that cover mucosal surfaces or the stratum corneum that covers the skin. Some drugs exhibit poor permeation across biological membranes or may experience excessive degradation during first-pass metabolism, which tends to limit their bioavailability. Various strategies have been used to improve drug bioavailability. Absorption enhancement strategies include the co-administration of chemical permeation enhancers, enzymes, and/or efflux transporter inhibitors, chemical changes, and specialized dosage form designs. Models with physiological relevance are needed to evaluate the efficacy of drug absorption enhancement techniques. Various in vitro cell culture models and ex vivo tissue models have been explored to evaluate and quantify the effectiveness of drug permeation enhancement strategies. This review deliberates on the use of in vitro and ex vivo models for the evaluation of drug permeation enhancement strategies for selected extravascular drug administration routes including the nasal, oromucosal, pulmonary, oral, rectal, and transdermal routes of drug administration.

Supramolecular cyclodextrin-based reservoir as nasal delivery vehicle for rivastigmine to brain

The purpose of this study involved the synthesis of supramolecular reservoir (i.e. cyclodextrin metal-organic framework, MOF) using cyclodextrins as building blocks, followed by cross-linking to obtain crosslinked CD framework (CDF) using CD-MOF as template and functionalized with borneol (BO) to enhance rivastigmine (RIV) permeation and facilitate brain targeting via intranasal administration. Utilizing BO modified CDF (BO-CDF) with cubic shape as a carrier for the encapsulation of RIV, a nasal RIV delivery system (RIV@BO-CDF) was fabricated. The particle size of RIV@BO-CDF was approximately 250 nm, and the drug loading capacity reached 15 ± 2 %. BO-CDF improved the mucoadhesion and enhanced RIV permeability with the plasma concentration-time curve (AUC), the brain AUC and the peak drug concentration within brain in rats 1.7, 2.3 and 8 times than that of oral RIV solution, respectively. The relative drug targeting efficiency percentage (DTE, 139.4 %) and direct drug transfer percentage (DTP, 28.3 %) of RIV@BO-COF indicated good targeting efficiency and direct nose-to-brain drug delivery. Overall, this study provides a potential application of supramolecular cyclodextrin-based reservoir to enhance the brain targeting and efficacy of the RIV via nasal delivery.

Mucoadhesive in situ nasal gel of amoxicillin trihydrate for improved local delivery: Ex vivo mucosal permeation and retention studies

Orally administered amoxicillin is recommended as the first-line treatment of acute bacterial rhinosinusitis (ABR) and given in a high-dose regimen. However, the risk of various systemic adverse reactions and low oral bioavailability are unbearable, increasing the threat of antibiotic resistance. Therefore, nasal delivery of amoxicillin can be a potential approach for effectively treating ABR locally, as well as overcoming those drawbacks. In a way to guarantee the effectiveness for local therapy in nasal cavity, the permeation and retention properties are of significant importance considerations. Accordingly, the present work aimed to investigate the characteristics with respect to the nasal applicability of the in situ gelling amoxicillin trihydrate (AMT) and further evaluate its permeability and retention properties through human nasal mucosa. The lyophilized formulations were characterized utilizing the Differential Scanning Calorimetry (DSC) and X-ray Powder Diffraction (XRPD), and also evaluated for its polarity, reconstitution time, droplet size distribution, mucoadhesive properties, and ex vivo permeability and retention studies. The results confirmed that the in situ gelling AMT formulations possess adequate mucoadhesive behavior, especially the formulation containing 0.3 % of gellan gum. Substantially, the in situ gelling AMT formulations were able to retain the drug on the surface of nasal mucosa instead of permeating across the membrane; thus, suitable for treating nasal infections locally. Altogether, the in situ gelling systems demonstrates promising abilities as a delivery platform to enhance local application of AMT within the nasal cavity.

Serum Albumin in Nasal Drug Delivery Systems: Exploring the Role and Application

The application of serum albumin in various types of formulations has emerged as a valuable option in biomedical research, especially in the field of nasal drug delivery systems. A serum albumin-based carrier system has been employed due to several benefits, such as enhancing drug solubility and stability, generating the desired controlled release profile, and developing favorable properties with respect to the challenges in nasal conditions, which, in this case, involves hindering rapid elimination due to nasal mucociliary clearance. Accordingly, considering the important role of serum albumin, in-depth knowledge related to its utilization in preparing nasal drug formulation is highly encouraged. This review aimed to explore the potential application of serum albumin in fabricating nasal drug formulations and its crucial role and functionality regarding the binding interaction with nasal mucin, which significantly determines the successful administration of nasal drug formulations.

Comparative Study of TPGS and Soluplus Polymeric Micelles Embedded in Poloxamer 407 In Situ Gels for Intranasal Administration

This study aims to highlight the importance of choosing the appropriate co-polymer or co-polymer mixed combinations in order to design value-added nasal dosage forms. Local therapy of upper respiratory tract-related infections, such as nasal rhinosinusitis is of paramount importance, thus advanced local therapeutic options are required. Dexamethasone was encapsulated into three different polymeric micelle formulations: Soluplus or TPGS-only and their mixed combinations. Dynamic light scattering measurements proved that the particles have a micelle size less than 100 nm in monodisperse distribution, with high encapsulation efficiency above 80% and an at least 7-fold water solubility increase. Tobramycin, as an antimicrobial agent, was co-formulated into the in situ gelling systems which were optimized based on gelation time and gelation temperature. The sol-gel transition takes place between 32-35 °C, which is optimally below the temperature of the nasal cavity in a quick manner below 5 min, a suitable strategic criterion against the mucociliary clearance. In vitro drug release and permeability studies confirmed a rapid kinetics in the case of the encapsulated dexamethasone accompanied with a sustained release of tobramycin, as the hydrophilic drug.

The prescription design and key properties of nasal gel for CNS drug delivery: A review

Central nervous system (CNS) diseases are among the major health problems. However, blood-brain barrier (BBB) makes traditional oral and intravenous delivery of CNS drugs inefficient. The unique direct connection between the nose and the brain makes nasal administration a great potential advantage in CNS drugs delivery. However, nasal mucociliary clearance (NMCC) limits the development of drug delivery systems. Appropriate nasal gel viscosity alleviates NMCC to a certain extent, gels based on gellan gum, chitosan, carbomer, cellulose and poloxamer have been widely reported. However, nasal gel formulation design and key properties for alleviating NMCC have not been clearly discussed. This article summarizes gel formulations of different polymers in existing nasal gel systems, and attempts to provide a basis for researchers to conduct in-depth research on the key characteristics of gel matrix against NMCC.

Preparation and Optimization of Bovine Serum Albumin Nanoparticles as a Promising Gelling System for Enhanced Nasal Drug Administration

Bovine serum albumin (BSA) has been used extensively as a suitable carrier system for alternative drug delivery routes, such as nasal administration. However, the optimization of BSA nanoparticles with respect to their nasal applicability has not been widely studied. The present study focuses on the characterization of BSA nanoparticles prepared using the desolvation method, followed by a gelation process to facilitate intranasal drug delivery. The results demonstrated that the ratio of BSA and the desolvating agent, ethanol, played a critical role in the nanoparticle characteristics of the BSA nanogel matrices (BSA-NGs). Based on the gelling properties, the formulations of BSA-NG 2, BSA-NG 4, and BSA-NG 6 were selected for further investigation. The Raman spectra confirmed that there were no specific changes to the secondary structures of the BSA. The mucoadhesion studies revealed moderately high mucoadhesive properties, with a mucin binding efficiency (MBE) value of around 67%, allowing the dose to avoid elimination due to rapid mucociliary clearance of the nasal passage. Via studying the nexus of the carrier system, BSA-NGs loaded with dexamethasone as a model drug were prepared and evaluated by differential scanning calorimetry (DSC) and thermal gravimetry (TG), ascertaining that no ethanol remained in the samples after the freeze-drying process. Furthermore, the viscosity measurements exhibited moderate viscosity, which is suitable for nasal liquid preparations. The in vitro release studies performed with a simulated nasal electrolyte solution (SNES) medium showed 88.15-95.47% drug release within 4 h. In conclusion, BSA nanoparticle gelling matrices can offer potential, value-added drug delivery carriers for improved nasal drug administration.

Quality by design-based optimization of in situ ionic-sensitive gels of amoxicillin-loaded bovine serum albumin nanoparticles for enhanced local nasal delivery

A recommended first-line acute bacterial rhinosinusitis (ABR) treatment regimen includes a high dose of orally administered amoxicillin, despite its frequent systemic adverse reactions coupled with poor oral bioavailability. Therefore, to overcome these issues, nasal administration of amoxicillin might become a potential approach for treating ABR locally. The present study aimed to develop a suitable carrier system for improved local nasal delivery of amoxicillin employing the combination of albumin nanoparticles and gellan gum, an ionic-sensitive polymer, under the Quality by Design methodology framework. The application of albumin nanocarrier for local nasal antibiotic therapy means a novel approach by hindering the nasal absorption of the drug through embedding into an in situ gelling matrix, further prolonging the drug release in the nasal cavity. The developed formulations were characterized, including mucoadhesive properties, in vitro drug release and antibacterial activities. Based on the results, 0.3 % w/v gellan gum concentration was selected as the optimal in situ gelling matrix. Essentially, each formulation adequately inhibited the growth of five common nasal pathogens in ABR. In conclusion, the preparation of albumin-based nanoparticles integrated with in situ ionic-sensitive polymer provides promising ability as nanocarrier systems for delivering amoxicillin intranasally for local antibiotic therapy.

In-situ Gels for Brain Delivery: Breaching the Barriers

The blood-brain barrier (BBB) regulates blood and chemical exchange in the central nervous system. It is made up of brain parenchyma capillary endothelial cells. It separates the interstitial cerebrospinal fluid from the circulation and limits brain drug entry. Peptides, antibodies, and even tiny hydrophilic biomolecules cannot flow across the BBB due to their semi-permeability. It protects the brain from poisons, chemicals, and pathogens, and blood cells penetrate brain tissue. BBB-facilitated carrier molecules allow selective permeability of nutrients such as D-glucose, L-lactic acid, L-phenylalanine, L-arginine, and hormones, especially steroid hormones. Brain barriers prevent drug molecules from entering, making medication delivery difficult. Drugs can reach specific brain regions through the nasal cavity, making it a preferred route. The in-situ gels are mucoadhesive, which extends their stay in the nasal cavity, allows them to penetrate deep and makes them a dependable way of transporting numerous medications, including peptides and proteins, straight into the central nervous system. This approach holds great potential for neurological therapy as they deliver drugs directly to the central nervous system, with less interference and better drug release control. The brain affects daily life by processing sensory stimuli, controlling movement and behaviour, and sustaining mental, emotional, and cognitive functioning. Unlike systemic routes, the nasal mucosa is extensively vascularized and directly contacts olfactory sensory neurons. Compared to the systemic circulation, this improves brain bioavailability of medications. Drugs can be delivered to the brain using in-situ gel formulations safely and efficiently, with a greater therapeutic impact than with traditional techniques.

Development of Thermoresponsive-Gel-Matrix-Embedded Amoxicillin Trihydrate-Loaded Bovine Serum Albumin Nanoparticles for Local Intranasal Therapy

A high dose of amoxicillin is recommended as the first-line therapy for acute bacterial rhinosinusitis (ABR). However, oral administration of amoxicillin is connected to many adverse reactions coupled with moderate bioavailability (~60%). Therefore, this study aimed to develop a topical nasal preparation of amoxicillin, employing a thermoresponsive nanogel system to increase nasal residence time and prolong drug release. Rheological investigations revealed that formulations containing 21−23% w/w Poloxamer 407 (P407) were in accordance with the requirement of nasal administration (gelling temperature ~35 °C). The average hydrodynamic diameter (<200 nm), pH (6.7−6.9), and hypertonic osmolality (611−663 mOsmol/L) of the in situ gelling nasal nanogel appeared as suitable characteristics for local rhinosinusitis treatment. Moreover, taking into account the mucoadhesive strength and drug release studies, the 21% w/w P407 could be considered as an optimized concentration for effective nasal delivery. Antibacterial activity studies showed that the ability of amoxicillin-loaded in situ gelling nasal nanogel to inhibit bacterial growth (five common ABR pathogens) preserved its effectiveness in comparison to 1 mg/mL amoxicillin aqueous solution as a positive control. Altogether, the developed amoxicillin-loaded in situ gelling thermoresponsive nasal nanogel can be a potential candidate for local antibiotic therapy in the nasal cavity.

Design and Optimization of In Situ Gelling Mucoadhesive Eye Drops Containing Dexamethasone

Poor bioavailability of eye drops is a well-known issue, which can be improved by increasing the residence time on the eye surface and the penetration of the active pharmaceutical ingredient (API). This study aims to formulate in situ gelling mucoadhesive ophthalmic preparations. To increase the residence time, the formulations were based on a thermosensitive polymer (Poloxamer 407 (P407)) and were combined with two types of mucoadhesive polymers. Dexamethasone (DXM) was solubilized by complexation with cyclodextrins (CD). The effect of the composition on the gel structure, mucoadhesion, dissolution, and permeability was investigated with 3³ full factorial design. These parameters of the gels were measured by rheological studies, tensile test, dialysis membrane diffusion, and in vitro permeability assay. The dissolution and permeability of the gels were also compared with DXM suspension and CD-DXM solution. The gelation is strongly determined by P407; however, the mucoadhesive polymers also influenced it. Mucoadhesion increased with the polymer concentration. The first phase of drug release was similar to that of the CD-DXM solution, then it became prolonged. The permeability of DXM was significantly improved. The factorial design helped to identify the most important factors, thereby facilitating the formulation of a suitable carrier for the CD-DXM complex.

Self-Emulsifying Drug Delivery Systems: An Alternative Approach to Improve Brain Bioavailability of Poorly Water-Soluble Drugs through Intranasal Administration

Efforts in discovering new and effective neurotherapeutics are made daily, although most fail to reach clinical trials. The main reason is their poor bioavailability, related to poor aqueous solubility, limited permeability through biological membranes, and the hepatic first-pass metabolism. Nevertheless, crossing the blood–brain barrier is the major drawback associated with brain drug delivery. To overcome it, intranasal administration has become more attractive, in some cases even surpassing the oral route. The unique anatomical features of the nasal cavity allow partial direct drug delivery to the brain, circumventing the blood–brain barrier. Systemic absorption through the nasal cavity also avoids the hepatic first-pass metabolism, increasing the systemic bioavailability of highly metabolized entities. Nevertheless, most neurotherapeutics present physicochemical characteristics that require them to be formulated in lipidic nanosystems as self-emulsifying drug delivery systems (SEDDS). These are isotropic mixtures of oils, surfactants, and co-surfactants that, after aqueous dilution, generate micro or nanoemulsions loading high concentrations of lipophilic drugs. SEDDS should overcome drug precipitation in absorption sites, increase their permeation through absorptive membranes, and enhance the stability of labile drugs against enzymatic activity. Thus, combining the advantages of SEDDS and those of the intranasal route for brain delivery, an increase in drugs’ brain targeting and bioavailability could be expected. This review deeply characterizes SEDDS as a lipidic nanosystem, gathering important information regarding the mechanisms associated with the intranasal delivery of drugs loaded in SEDDS. In the end, in vivo results after SEDDS intranasal or oral administration are discussed, globally revealing their efficacy in comparison with common solutions or suspensions.

Mucoadhesive meloxicam-loaded nanoemulsions: Development, characterization and nasal applicability studies

Intranasally administered non-steroidal anti-inflammatory drugs (NSAIDs) offer an innovative opportunity in the field of pain management. Combination of the nasal physiological advantages such as the rich vascularization and large absorption area along with novel nanomedical formulations can fulfill all the necessary criteria of an advanced drug delivery system. Nanoemulsions represent a versatile formulation approach suitable for nasal drug delivery by increasing the absorption and the bioavailability of many drugs for systemic and nose-to-brain delivery due to their stability, small droplet size and optimal solubilization properties. In this study we aimed to develop meloxicam (MX)-loaded mucoadhesive nanoemulsions and to investigate the nasal applicability of the optimized formulations. Our results indicated the optimized nanoemulsion formulation (MX-NE3) had a droplet size of 158.5 nm in monodisperse droplet size distribution (polydispersity index of 0.211). The surface charge was -11.2 mV, which helped with the colloidal stability upon dilution at simulated nasal conditions and storage. The high encapsulation efficiency (79.2%) mediated a 15-fold drug release and a 3-fold permeability increase at nasal conditions compared to the initial MX. Proper wetting properties associated with high mucoadhesion prosper the increased residence time on the surface of the nasal mucosa. No cytotoxic effect of the formulations was observed on NIH/3T3 mouse embryonic fibroblast cell lines, which supports the safe nasal applicability.

Nose-to-brain drug delivery for the treatment of Alzheimer's Disease: Current advancements and challenges

INTRODUCTION

The irreversible destruction of neurons, progressive loss of memory and cognitive behavior, high cost of therapy, and impact on society desire a better, effective, and affordable treatment of AD. The nose-to-brain drug delivery approach holds a great potential to access the brain without any hindrance of BBB and result in higher bioavailability thus better therapeutic efficacy of anti-AD drugs.

AREAS COVERED

The present review article highlighted the current facts and worldwide statistics of AD and its detailed etiology. Followed by barriers to brain delivery, nose-to-brain delivery, their limitations, and amalgamation with various novel carrier systems. We have emphasized recent advancements in nose-to-brain delivery using mucoadhesive, stimuli-responsive carriers, polymeric nanoparticles, lipid nanoparticles, protein/peptide delivery for treatment of AD.

EXPERT OPINION

The available therapies are symptomatic, mitigate the symptoms of AD at the initial stages. In this lieu, nose-to-brain delivery has the ability to overcome these limitations and increase drug bioavailability in the brain. Various novel strategies including stimuli-responsive systems, nanoparticles, etc. enhance the nasal drug permeation, protects the drug, and enhance its therapeutic potency. Although, successful preclinical data does not assure the clinical success of the therapy and hence exhaustive clinical investigations are needed to make the therapy available for patients.

Characterizing the Drug-Release Enhancement Effect of Surfactants on Megestrol-Acetate-Loaded Granules

In this study, the effect of Cremophor® RH 40 (CR 40) classic micelles and Soluplus® (SP) polymeric micelles were investigated on a novel granule-type drug-delivery system containing megestrolacetate (MGA). Using a risk assessment-based approach on the formulation via melt technology resulted in the formation of these granules, presented as the dosage, with proper particle size and flow characteristics. Due to the application of a eutectic carrier base composition, gentle process conditions were reached, retaining the crystalline structure of the carrier system and allowing for the proper distribution of MGA in the granules. The increased water solubility (0.111 mg/mL to 2.154 mg/mL), and the decreased nano particle size (102.27 nm) with uniform distribution (polydispersity index of 0.259) and colloid stability (zeta potential of −12.99 mV) resulted in SP polymeric micelles prevailing over CR 40 micelles in this gastric dissolution study, performed in biorelevant fasted and fed state drug-release media. Mathematical characterization and kinetic model fitting supported the fast drug-release mechanism of polymeric micelles over micelles. The value-added polymeric micelle-containing formulation developed can be successfully administered perorally and the enhanced drug release offers the possibility of greater drug absorption in the gastrointestinal tract.

In Vitro Comparative Study of Solid Lipid and PLGA Nanoparticles Designed to Facilitate Nose-to-Brain Delivery of Insulin

The brain insulin metabolism alteration has been addressed as a pathophysiological factor underlying Alzheimer's disease (AD). Insulin can be beneficial in AD, but its macro-polypeptide nature negatively influences the chances of reaching the brain. The intranasal (IN) administration of therapeutics in AD suggests improved brain-targeting. Solid lipid nanoparticles (SLNs) and poly(lactic-co-glycolic acid) nanoparticles (PLGA NPs) are promising carriers to deliver the IN-administered insulin to the brain due to the enhancement of the drug permeability, which can even be improved by chitosan-coating. In the present study, uncoated and chitosan-coated insulin-loaded SLNs and PLGA NPs were formulated and characterized. The obtained NPs showed desirable physicochemical properties supporting IN applicability. The in vitro investigations revealed increased mucoadhesion, nasal diffusion, and drug release rate of both insulin-loaded nanocarriers over native insulin with the superiority of chitosan-coated SLNs. Cell-line studies on human nasal epithelial and brain endothelial cells proved the safety IN applicability of nanoparticles. Insulin-loaded nanoparticles showed improved insulin permeability through the nasal mucosa, which was promoted by chitosan-coating. However, native insulin exceeded the blood-brain barrier (BBB) permeation compared with nanoparticulate formulations. Encapsulating insulin into chitosan-coated NPs can be beneficial for ensuring structural stability, enhancing nasal absorption, followed by sustained drug release.

In Vitro Evaluation of Nasal Aerosol Depositions: An Insight for Direct Nose to Brain Drug Delivery

The nasal cavity is an attractive route for both local and systemic drug delivery and holds great potential for access to the brain via the olfactory region, an area where the blood–brain barrier (BBB) is effectively absent. However, the olfactory region is located at the roof of the nasal cavity and only represents ~5–7% of the epithelial surface area, presenting significant challenges for the deposition of drug molecules for nose to brain drug delivery (NTBDD). Aerosolized particles have the potential to be directed to the olfactory region, but their specific deposition within this area is confounded by a complex combination of factors, which include the properties of the formulation, the delivery device and how it is used, and differences in inter-patient physiology. In this review, an in-depth examination of these different factors is provided in relation to both in vitro and in vivo studies and how advances in the fabrication of nasal cast models and analysis of aerosol deposition can be utilized to predict in vivo outcomes more accurately. The challenges faced in assessing the nasal deposition of aerosolized particles within the paediatric population are specifically considered, representing an unmet need for nasal and NTBDD to treat CNS disorders.