Recent Advances in Polycaprolactones for Anticancer Drug Delivery

Drug-Loaded Polycaprolactone/Fibroin/Polydopamine Composite Coating on an Anodized Titanium Surface with Calcium and Phosphorus Deposited Using Electrospray Technology

Due to the low bioactivity of titanium implants, the extended bone integration process after implantation substantially heightens the risk of inflammation, a primary cause of implant failure. To mitigate inflammatory responses and enhance bone integration between the implant and bone tissue, based on prior research that applied calcium phosphate (CaP) on titanium surfaces, we employed electrospraying technology to develop a drug-loaded polycaprolactone/silk fibroin/polydopamine (PCL/SF/PDA) composite coating as the second layer on top of the calcium phosphate deposition. The surface morphologies of the CaP deposits and composite coatings were characterized by SEM. The SF/PDA gel significantly increased the adhesion of the coating, thereby enhancing its clinical application potential. All materials exhibited excellent biodegradability, and their superior biocompatibility was confirmed through cell assays. Following in vitro experiments, in vivo studies were conducted using a rat cranial defect model. Micro-CT results and staining demonstrated that CaP deposition significantly accelerated bone integration between the titanium substrate and bone, while the drug-loaded polymer coating notably improved the inflammatory environment at the defect site. These findings offer new insights into the development of titanium implants.

Biodegradable Poly(d,l-lactide-co-ε-caprolactone) Electrospun Scaffolds Outperform Antifibrotic-Loaded Meshes in an in Vivo Tissue Regeneration Model

Wound healing is a complex and dynamic process of replacing missing cellular structures and tissue layers. Clinical practice includes the application of a sterile bandage to promote healing and to restrain infection, like the commercial nonbiodegradable meshes. However, while inert, nontoxic, and nonimmunogenic, they can cause calcification, fibrosis, and inflammation, potentially hindering the healing process in the long term. To address this challenge and enhance wound healing, we developed a totally biodegradable electrospun poly(d,l-lactide-co-ε-caprolactone) (PDLLCL) drug delivery system that incorporates two already FDA-approved antifibrotics, pirfenidone (PIRF) and triamcinolone acetonide (TA). The PDLLCL meshes, fabricated via electrospinning, exhibited homogeneity and complete degradation after 120 days, consistent with the wound healing process. In vitro, functional analysis on RAW 264.7 macrophages revealed no cytotoxicity and an immunomodulatory effect of PIRF and TA compared with the positive control (lipopolysaccharides, LPS) and the PDLLCL meshes alone. Lastly, subcutaneous in vivo assessment on a rabbit model, following the ISO 10993-6 standard, showed that our tailored made PDLLCL meshes were able to lower both irritation and fibrosis indexes from 2 weeks to 4 weeks of implantation, highlighting the beneficial effect of biodegradable polymers. However, we saw no significant positive effect on the incorporation of antifibrotics in vivo for irritation and fibrosis indexes. This underscores the potential of PDLLCL meshes as a possible alternative for wound healing, reducing the use of intermittent antifibrotic agents during the healing process.

A Silibinin-Poly(ε-Caprolactone) Conjugate as an Enhanced Anticancer Agent

Poly(ε-caprolactone) (PCL) is a hydrolytically degradable biopolyester used in drug delivery to enhance drug solubility and bioavailability, where drugs are typically incorporated physically within the biopolymeric matrix rather than covalently bonded, due to the limited availability of functional groups required for covalent attachment. In pursuit of developing a facile method for the production of a biopolyester-drug covalent conjugate with effective drug loading capacity, this study reports the synthesis of a covalent Silibinin-PCL conjugate (Sil-PCLHyd) through a two-step approach. This involves the controlled hydrolysis of a high molecular weight PCL to increase the concentration of carboxylic end groups, which are subsequently used for the catalyzed esterification with Silibinin. The Sil-PCLHyd is characterized with mass spectrometry, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, and NMR and UV-vis spectroscopies. The cytotoxic effects of Sil-PCLHyd against colorectal adenocarcinoma cells (Caco-2) are measured through the MTT assay. The results of the Sil-PCLHyd characterization revealed a Silibinin loading of ≈9.8 wt.%. The MTT assay demonstrated that Sil-PCLHyd induced cytotoxic effects at concentrations a hundred times lower than those required for free Silibinin. The proposed approach might represent a reliable pathway for the development of biopolyester-based covalent conjugates with a high drug loading capacity.

Computational design to experimental validation: molecular dynamics-assisted development of polycaprolactone micelles for drug delivery

Amphiphilic diblock copolymers are used in drug delivery systems for cancer treatments. However, these carriers suffer from lower drug loading capacity, poor water solubility, and non-targeted drug release. Here, we utilized a computational approach to analyze the effect of the functional groups of the hydrophobic block on the drug-polymer interactions. To design effective drug carriers, four different amphiphilic block copolymer micelles with distinct aromatic and heteroaromatic groups at the hydrophobic core were subjected to molecular dynamics simulations. The solvent-accessible surface area, water shell, hydrogen bonding, and radius of gyration of the simulated micelles were determined. Further, we assessed the interactions between the hydrophobic block and drug molecules using linear interaction energy and non-covalent interactions. The computational studies revealed that the micelles containing a novel poly(γ-2-methoxyfuran-ε-caprolactone) (PFuCL) hydrophobic block have the highest polymer-drug interactions. From these findings, we synthesized a novel amphiphilic poly(ethylene glycol)-b-poly(γ-2-methoxyfuran(ε-caprolactone)) (PEG-b-PFuCL) block copolymer using ring-opening polymerization of FuCL monomer. The polymer was self-assembled in aqueous media to form micelles. The aromatic segment of PEG-b-PFuCL micelles enhanced the doxorubicin (DOX) loading through non-covalent interactions, resulting in a 4.25 wt% drug-loading capacity. We also showed that the hydrolysis of the ester bond allowed a faster in vitro drug release at pH 5.0 compared to pH 7.4. Cell viability experiments revealed that DOX-loaded PEG-b-PFuCL micelles show that micelles are cytotoxic and readily uptaken into MDA-MB-231 cells. Therefore, furan-substituted micelles will be an ideal drug carrier with higher polymer-to-drug interactions, enhanced drug loading, and lower premature leakage.

Drug Repurposing and Nanotechnology for Topical Skin Cancer Treatment: Redirecting toward Targeted and Synergistic Antitumor Effects

Skin cancer represents a major health concern due to its rising incidence and limited treatment options. Current treatments (surgery, chemotherapy, radiotherapy, immunotherapy, and targeted therapy) often entail high costs, patient inconvenience, significant adverse effects, and limited therapeutic efficacy. The search for novel treatment options is also marked by the high capital investment and extensive development involved in the drug discovery process. In response to these challenges, repurposing existing drugs for topical application and optimizing their delivery through nanotechnology could be the answer. This innovative strategy aims to combine the advantages of the known pharmacological background of commonly used drugs to expedite therapeutic development, with nanosystem-based formulations, which among other advantages allow for improved skin permeation and retention and overall higher therapeutic efficacy and safety. The present review provides a critical analysis of repurposed drugs such as doxycycline, itraconazole, niclosamide, simvastatin, leflunomide, metformin, and celecoxib, formulated into different nanosystems, namely, nanoemulsions and nanoemulgels, nanodispersions, solid lipid nanoparticles, nanostructured lipid carriers, polymeric nanoparticles, hybrid lipid-polymer nanoparticles, hybrid electrospun nanofibrous scaffolds, liposomes and liposomal gels, ethosomes and ethosomal gels, and aspasomes, for improved outcomes in the battle against skin cancer. Enhanced antitumor effects on melanoma and nonmelanoma research models are highlighted, with some nanoparticles even showing intrinsic anticancer properties, leading to synergistic effects. The explored research findings highly evidence the potential of these approaches to complement the currently available therapeutic strategies in the hope that these treatments might one day reach the pharmaceutical market.

Advances in biomaterials-based tissue engineering for regeneration of female reproductive tissues

The anatomical components of the female reproductive system-comprising the ovaries, uterus, cervix, vagina, and fallopian tubes-interact intricately to provide the structural and hormonal support essential for reproduction. However, this system is susceptible to various detrimental factors, both congenital and acquired, that can impair fertility and adversely affect quality of life. Recent advances in bioengineering have led to the development of sophisticated three-dimensional models that mimic the complex architecture and functionality of reproductive organs. These models, incorporating diverse cell types and tissue layers, are crucial for understanding physiological processes within the reproductive tract. They offer insights into decidualization, ovulation, folliculogenesis, and the progression of reproductive cancers, thereby enhancing personalized medical treatments and addressing female infertility. This review highlights the pivotal role of tissue engineering in diagnosing and treating female infertility, emphasizing the importance of considering factors like biocompatibility, biomaterial selection, and mechanical properties in the design of bioengineered systems. The challenge of replicating the functionally specialized and structurally complex organs, such as the uterus and ovary, underscores the need for reliable techniques that improve morphological and functional restoration. Despite substantial progress, the goal of creating a fully artificial female reproductive system is still a challenge. Nonetheless, the recent fabrication of artificial ovaries, uteruses, cervixes, and vaginas marks significant advancements toward this aim. Looking forward, the challenges in bioengineering are expected to spur further innovations in both basic and applied sciences, potentially hastening the clinical adoption of these technologies.

Poloxamer 188 stabilized poly (ε-caprolactone) microspheres of voriconazole for targeting pulmonary aspergillosis

AIM

Voriconazole (VRZ) is highly effective in treating invasive pulmonary aspergillosis (IPA), in addition to hepatotoxicity. Therefore, the current study focuses on the development and characterization of voriconazole-loaded microspheres (VRZ@PCL MSPs) to augment pulmonary localization and antifungal efficacy.

METHODS

VRZ@PCL MSPs were fabricated by using the o/w emulsion method. The optimized F3VRZ@PCL MSPs were subjected to physicochemical characterization, in vitro release, hemocompatibility, antifungal efficacy as well as pharmacokinetic and biodistribution evaluation.

RESULTS

The optimized F3VRZ@MSPs exhibited a particle size (10.90 ± 2.61 µm), entrapment efficiency (19.35 ± 2.47%), drug loading (3.22 ± 0.41%) with sustained release behavior up to 24 h and hemocompatibility upto 50 µg/mL. Results of antifungal testing indicated the superior antifungal potential of F3VRZ@PCL MSPs as compared to free VRZ and nystatin. In vivo pharmacokinetic evaluation in Sprague-Dawley rats displayed 12.5-fold and 4.5-fold increments, respectively, in t1/2 and AUC0-t of F3VRZ@PCL MSPs as compared to free VRZ. Moreover, F3VRZ@PCL MSPs displayed relatively higher lung targeting with a drug targeting index (DTI) of 0.213 as compared to DTI of 0.037 of free VRZ.

CONCLUSION

In conclusion, F3VRZ@PCL MSPs offer a promising approach for sustained and targeted delivery of VRZ and hold the potential to offer high therapeutic efficacy in the treatment of IPA.

Beyond Needles: Immunomodulatory Hydrogel-Guided Vaccine Delivery Systems

Vaccines are critical for combating infectious diseases, saving millions of lives worldwide each year. Effective immunization requires precise vaccine delivery to ensure proper antigen transport and robust immune activation. Traditional vaccine delivery systems, however, face significant challenges, including low immunogenicity and undesirable inflammatory reactions, limiting their efficiency. Encapsulating or binding vaccines within biomaterials has emerged as a promising strategy to overcome these limitations. Among biomaterials, hydrogels have gained considerable attention for their biocompatibility, ability to interact with biological systems, and potential to modulate immune responses. Hydrogels offer a materials science-driven approach for targeted vaccine delivery, addressing the shortcomings of conventional methods while enhancing vaccine efficacy. This review examines the potential of hydrogel-based systems to improve immunogenicity and explores their dual role as immunomodulatory adjuvants. Innovative delivery methods, such as microneedles, patches, and inhalable systems, are discussed as minimally invasive alternatives to traditional administration routes. Additionally, this review addresses critical challenges, including safety, scalability, and regulatory considerations, offering insights into hydrogel-guided strategies for eliciting targeted immune responses and advancing global immunization efforts.

Recent trends on polycaprolactone as sustainable polymer-based drug delivery system in the treatment of cancer: Biomedical applications and nanomedicine

The unique properties-such as biocompatibility, biodegradability, bio-absorbability, low cost, easy fabrication, and high versatility-have made polycaprolactone (PCL) the center of attraction for researchers. The derived introduction in this manuscript gives a pretty detailed overview of PCL, so you can first brush up on it. Discussion on the various PCL-based derivatives involves, but is not limited to, poly(ε-caprolactone-co-lactide) (PCL-co-LA), PCL-g-PEG, PCL-g-PMMA, PCL-g-chitosan, PCL-b-PEO, and PCL-g-PU specific properties and their probable applications in biomedicine. This paper has considered examining the differences in the diverse disease subtypes and the therapeutic value of using PCL. Advanced strategies for PCL in delivery systems are also considered. In addition, this review discusses recently patented products to provide a snapshot of recent updates in this field. Furthermore, the text probes into recent advances in PCL-based DDS, for example, nanoparticles, liposomes, hydrogels, and microparticles, while giving special attention to comparing the esters in the delivery of bioactive compounds such as anticancer drugs. Finally, we review future perspectives on using PCL in biomedical applications and the hurdles of PCL-based drug delivery, including fine-tuning mechanical strength/degradation rate, biocompatibility, and long-term effects in living systems.

Dynamics of Amphiphilic Poly(ε-Caprolactone) Micelles with Doxorubicin and Transition Temperature Predictions Using All-Atom Molecular Dynamics Simulation

Despite the advent of novel therapeutics, the efficient delivery of antineoplastic drugs remains a challenge. Biodegradable polymeric micelles represent a promising frontier by offering enhanced drug solubility, tumor targeting, and controlled release profiles. However, the underlying dynamics governing the drug encapsulation and solvation within these micellar structures is still vague and poorly understood. In this study, we used amphiphilic poly(γ-benzyloxy-ε-caprolactone)-b-poly(γ-2-[2-(2-methoxy ethoxy)ethoxy]ethoxy-ε-caprolactone) as a model copolymer with doxorubicin as a model drug and performed all-atom molecular dynamics simulations to understand the regulating mechanism of the encapsulation process. The results are in good agreement with the experimental results. In addition, we interpreted the dynamic behavior of the polymeric micelles and vital intermolecular interactions that play a key role in drug encapsulation. Our study provides a theoretical approach to obtain insights for designing and enhancing novel anticancer drug carriers for therapeutics.

Development of Nanocomposite Microspheres for Nasal Administration of Deferiprone in Neurodegenerative Disorders

Elevated brain iron levels are characteristic of many neurodegenerative diseases. As an iron chelator with short biological half-life, deferiprone leads to agranulocytosis and neutropenia with a prolonged therapeutic course. Its inclusion in sustained-release dosage forms may reduce the frequency of administration. On the other hand, when administered by an alternative route of administration, such as the nasal route, systemic exposure to deferiprone will be reduced, thereby reducing the occurrence of adverse effects. Direct nose-to-brain delivery has been raised as a non-invasive strategy to deliver drugs to the brain, bypassing the blood-brain barrier. The aim of the study was to develop and characterize nanocomposite microspheres suitable for intranasal administration by combining nano- and microparticle-based approaches. Nanoparticles with an average particle size of 213 ± 56 nm based on the biodegradable polymer poly-ε-caprolactone were developed using the solvent evaporation method. To ensure the deposition of the particles in the nasal cavity and avoid exhalation or deposition into the small airways, the nanoparticles were incorporated into composite structures of sodium alginate obtained by spray drying. Deferiprone demonstrated sustained release from the nanocomposite microspheres and high iron-chelating activity.

A Novel Poly(ε-Caprolactone)-Based Photo-Crosslinkable Liquid Copolymer as a Versatile Drug Delivery Platform

Background/Objectives: Hydrophobic semi-solid or liquid biodegradable polymers have shown unique advantages as injectable matrices for sustained release of a wide range of drugs. Here we report the design, synthesis, and characterization of a new low-melt liquid copolymer based on poly(ε-caprolactone) (PCL) and establish its utility as a versatile delivery platform. Methods: The copolymer, mPA20, consisting of short PCL blocks connected via acid-labile acetal linkages, was synthesized using a one-pot reaction and its properties were comprehensively characterized. Results: mPA20 is an amorphous, injectable liquid at physiological temperature and can undergo pH-sensitive hydrolytic degradation. mPA20 bearing methacrylate end groups can be photo-crosslinked into solid matrices with tunable mechanical properties. A hydrophobic fluorophore, Nile Red (NR), was solubilized in mPA20 without any solvent. Sustained release of NR into aqueous medium was achieved using mPA20, either as an injectable liquid depot or a photo-crosslinked solid matrix. Further, mPA20 self-emulsified in water to form nanodroplets, which were subsequently photo-crosslinked into nanogels. Both the nanodroplets and nanogels mediated efficient intracellular delivery of NR with no cytotoxicity. Conclusions: mPA20, a new photo-crosslinkable, hydrophobic liquid copolymer with pH-sensitive degradability, is highly adaptable as either an injectable or implantable depot or nanoscale carrier for the controlled release and intracellular delivery of poorly soluble drugs.

Maleimide functionalized polycaprolactone micelles for glutathione quenching and doxorubicin delivery

High glutathione production is known to be one of the defense mechanisms by which many cancer cells survive elevated oxidative stress. By explicitly targeting glutathione in these cancer cells and diminishing its levels, oxidative stress can be intensified, ultimately triggering apoptosis or programmed cell death. Herein, we developed a novel approach by creating maleimide-functionalized polycaprolactone polymers, specifically using 2,3-diiodomaleimide functionality to reduce the level of glutathione in cancer cells. Polycaprolactone was chosen to conjugate the 2,3-diiodomaleimide functionality due to its biodegradable and biocompatible properties. The amphiphilic block copolymer was synthesized using PEG as a macroinitiator to make corresponding polymeric micelles. The resulting 2,3-diiodomaleimide-conjugated polycaprolactone micelles effectively quenched glutathione, even at low concentrations (0.01 mg mL-1). Furthermore, we loaded these micelles with the anticancer drug doxorubicin (DOX), which exhibited pH-dependent drug release. We obtained a loading capacity (LC) of 3.5% for the micelles, one of the highest LC reported among functional PCL-based micelles. Moreover, the enhanced LC doesn't affect their release profile. Cytotoxicity experiments demonstrated that empty and DOX-loaded micelles inhibited cancer cell growth, with the DOX-loaded micelles displaying the highest cytotoxicity. The ability of the polymer to quench intracellular GSH was also confirmed. This approach of attaching maleimide to polycaprolactone polymers shows promise in depleting elevated glutathione levels in cancer cells, potentially improving cancer treatment efficacy.

Active targeted delivery of theranostic thermo/pH dual-responsive magnetic Janus nanoparticles functionalized with folic acid/fluorescein ligands for enhanced DOX combination therapy of rat glioblastoma

Doxorubicin (DOX), a chemotherapy drug, has demonstrated limited efficacy against glioblastoma, an aggressive brain tumor with resistance attributed to the blood-brain barrier (BBB). This study aims to overcome this challenge by proposing the targeted delivery of magnetic Janus nanoparticles (MJNPs) functionalized with folic acid ligands, fluorescent dye, and doxorubicin (DOX/MJNPs-FLA). The properties of these nanoparticles were comprehensively evaluated using bio-physiochemical techniques such as Fourier transform infrared (FTIR) spectroscopy, dynamic light scattering (DLS), zeta potential analysis, high-resolution transmission electron microscopy (HR-TEM), vibrating sample magnetometry (VSM), fluorescence microscopy, MTT assay, hemolysis assay, and liver enzyme level evaluation. Dual-controlled DOX release was investigated under different pH and temperature conditions. Additionally, the impact of DOX/MJNPs-FLA on apoptosis induction in tumor cells, body weight, and survival time of cancerous animals was assessed. The targeted delivery system was assessed using C6 and OLN-93 cell lines as representatives of cancerous and healthy cell lines, respectively, alongside Wistar rat tumor-bearing models. Results from Prussian blue staining and confocal microscopy tests demonstrated the effective targeted internalization of MJNPs-FLA by glioblastoma cells. Additionally, we investigated the biodistribution of the nanoparticles utilizing fluorescence imaging techniques. This enabled us to track the distribution pattern of MJNPs-FLA in vivo, shedding light on their movement and accumulation within the biological system. Furthermore, the combination of chemotherapy and magnetic hyperthermia exhibited enhanced efficacy in inducing apoptosis, as evidenced by the increase of the pro-apoptotic Bax gene and a decrease in the anti-apoptotic Bcl-2 gene. Remarkably, this combination treatment did not cause any hepatotoxicity. This study highlights the potential of DOX/MJNPs-FLA as carriers for therapeutic and diagnostic agents in the context of theranostic applications for the treatment of brain malignancies. Additionally, it demonstrates the promising performance of DOX/MJNPs-FLA in combination treatment through passive and active targeting.

Polymeric nanoparticles: A promising strategy for treatment of Alzheimer's disease

Alzheimer's disease (AD), is characterised by two major hallmarks: the formation of extracellular β-amyloid (Aβ) plaques and the hyperphosphorylation of tau protein, thus leading to the formation of neurofibrillary tangles. These hallmarks cause synaptic loss, neuronal damage, and the development of neuroinflammation and oxidative stress, which promote AD progression. Thus, the goal of treating AD is eliminating these hallmarks, to prevent AD progression and decrease symptoms. However, current available therapies provide symptomatic relief rather than treating the underlying cause of the disease, because the restrictive nature of the blood brain barrier (BBB) impedes the entry of drugs, thereby affecting drug efficacy and bioavailability. Researchers are focusing on developing new therapeutic approaches to bypass the BBB, for achieving site-specific drug delivery with the highest possible bioavailability and the lowest adverse effects. Recently explored therapeutic strategies include use of biologic agents such as monoclonal antibodies. Aducanumab, a strong candidate for treating AD, has been granted accelerated Food and Drug Administration approval; however, safety concerns may hinder its future use. Thus, nanotechnological approaches have led to a new era of AD treatment. Nanoparticles (NPs), because of their small particle size, can cross the BBB, thus enhancing drug pharmacokinetic properties and enabling targeted drug delivery. Polymeric NPs have been extensively studied, because of their simple production, biodegradability, biocompatibility, and unique architecture. These NPs provide a flexible vesicle that can be easily tailored to achieve desired physicochemical features. In this review, various types of polymer-based-NPs are discussed, highlighting the properties of fabricated NPs, which have multiple benefits in AD treatment, including anti-amyloid, antioxidant, and anti-inflammatory effects.

Metal and Metal Oxides Nanoparticles as Nanofillers for Biodegradable Polymers

Polymeric materials, despite their many undeniable advantages, nowadays are a major environmental challenge. Thus, in recent years biodegradable polymer matrices have been widely used in various sectors, including the medicinal, chemical, and packaging industry. Their widespread use is due to the properties of biodegradable polymer matrices, among which are their adjustable physicochemical and mechanical properties, as well as lower environmental impact. The properties of biodegradable polymers can be modified with various types of nanofillers, among which clays, organic and inorganic nanoparticles, and carbon nanostructures are most commonly used. The performance of the final product depends on the size and uniformity of the used nanofillers, as well as on their distribution and dispersion in the polymer matrix. This literature review aims to highlight new research results on advances and improvements in the synthesis, physicochemical properties and applications of biodegradable polymer matrices modified with metal nanoparticles and metal oxides.

Application of electron paramagnetic resonance spectroscopy for determining the relative nanoenvironment fluidity of polymeric micelles

Polymeric micelles are nanocarriers for drug, protein and gene delivery due to their unique core/shell structure, which encapsulates and protects therapeutic cargos with diverse physicochemical properties. However, information regarding the micellar nanoenvironment's fluidity can provide unique insight into their makeup. In this study, we used electron paramagnetic resonance (EPR) spectroscopy to study free radical spin probe (5-doxylstearate methyl ester, 5-MDS, and 16-doxylstearic acid, 16-DS) behaviour in methoxy-poly(ethylene oxide)-poly(α-benzyl carboxylate-ε-caprolactone) (PEO-PBCL) and methoxy-poly(ethylene oxide)-poly(ε-caprolactone) (PEO-PCL) polymeric micelles. Spin probes provided information about the spectroscopic rotational correlation time (τ, s) and the spectroscopic partition parameter F. We hypothesized that spin probes would partition into the polymeric micelles, and these parameters would be calculated. The results showed that both 5-MDS and 16-DS spectra were modulated in the presence of polymeric micelles. Based on τ values, 5-MDS revealed that PEO-PCL (τ = 3.92 ± 0.26 × 10-8 s) was more fluid than PEO-PBCL (τ = 7.15 ± 0.63 × 10-8 s). The F parameter, however, could not be calculated due to the rotational hindrance of the probe within the micelles. With 16-DS, more probe rotation was observed, and although the F parameter could be calculated, it was not helpful to distinguish the micelles' fluidity. Also, doxorubicin-loading interfered with the spin probes, particularly for 16-DS. However, using simulations, we could distinguish the hydrophilic and hydrophobic components of the 16-DS probe. The findings suggest that EPR spectroscopy is a valuable method for determining core fluidity in polymeric micelles.

Advancements in wound healing: integrating biomolecules, drug delivery carriers, and targeted therapeutics for enhanced tissue repair

Wound healing, a critical biological process vital for tissue restoration, has spurred a global market exceeding $15 billion for wound care products and $12 billion for scar treatment. Chronic wounds lead to delayed or impaired wound healing. Natural bioactive compounds, prized for minimal side effects, stand out as promising candidates for effective wound healing. In response, researchers are turning to nanotechnology, employing the encapsulation of these agents into drug delivery carriers. Drug delivery system will play a crucial role in enabling targeted delivery of therapeutic agents to promote tissue regeneration and address underlying issues such as inflammation, infection, and impaired angiogenesis in chronic wound healing. Drug delivery carriers offer distinct advantages, exhibiting a substantial ratio of surface area to volume and altered physical and chemical properties. These carriers facilitate sustained and controlled release, proving particularly advantageous for the extended process of wound healing, that typically comprise a diverse range of components, integrating both natural and synthetic polymers. Additionally, they often incorporate bioactive molecules. Despite their properties, including poor solubility, rapid degradation, and limited bioavailability, various natural bioactive agents face challenges in clinical applications. With a global research, emphasis on harnessing nanomaterial for wound healing application, this research overview engages advancing drug delivery technologies to augment the effectiveness of tissue regeneration using bioactive molecules. Recent progress in drug delivery has poised to enhance the therapeutic efficacy of natural compounds in wound healing applications.

Peptide Acylation in Aliphatic Polyesters: a Review of Mechanisms and Inhibition Strategies

Biodegradable polyesters are widely employed in the development of controlled release systems for peptide drugs. However, one of the challenges in developing a polyester-based delivery system for peptides is the acylation reaction between peptides and polymers. Peptide acylation is an important factor that affects formulation stability and can occur during storage, in vitro release, and after drug administration. This review focuses on the mechanisms and parameters that influence the rate of peptide acylation within polyesters. Furthermore, it discusses reported strategies to minimize the acylation reaction.

Effect of aromatic substituents on thermoresponsive functional polycaprolactone micellar carriers for doxorubicin delivery

Amphiphilic functional polycaprolactone (PCL) diblock copolymers are excellent candidates for micellar drug delivery. The functional groups on the backbone significantly affect the properties of PCL. A systematic investigation of the effect of aromatic substituents on the self-assembly of γ-functionalized PCLs and the delivery of doxorubicin (DOX) is presented in this work. Three thermoresponsive amphiphilic diblock copolymers with poly(γ-benzyloxy-ε-caprolactone) (PBnCL), poly(γ-phenyl- ε-caprolactone) (PPhCL), poly(γ-(4-ethoxyphenyl)-ε-caprolactone) (PEtOPhCL), respectively, as hydrophobic block and γ-tri(ethylene glycol) functionalized PCL (PME3CL) as hydrophilic block were prepared through ring-opening polymerization (ROP). The thermoresponsivity, thermodynamic stability, micelle size, morphology, DOX-loading, and release profile were determined. The LCST values of amphiphilic diblock copolymers PME3CL-b-PBnCL, PME3CL-b-PPhCL, and PME3CL-b-PEtOPhCL are 74.2°C, 43.3°C, and 37.3°C, respectively. All three copolymers formed spherical micelles in phosphate-buffered saline (PBS, 1×, pH = 7.4) at low concentrations ranging from 8.7 × 10-4 g/L to 8.9 × 10-4 g/L. PME3CL-b-PBnCL micelles showed the highest DOX loading capacity of 3.01 ± 0.18 (wt%) and the lowest drug release, while PME3CL-b-PEtOPhCL micelles exhibited the lowest DOX loading capacity of 1.95 ± 0.05 (wt%) and the highest drug release. Cytotoxicity and cellular uptake of all three micelles were assessed in vitro using MDA-MB-231 breast cancer cells. All three empty micelles did not show significant toxicity to the cells at concentrations high up to 0.5 mg/mL. All three DOX-loaded micelles were uptaken into the cells, and DOX was internalized into the nucleus of the cells.

Reversible Cross-linked Thermoresponsive Polycaprolactone Micelles for Enhanced Stability and Controlled Release

Thermoresponsive amphiphilic poly(ε-caprolactone)s (PCL)s are excellent candidates for drug delivery due to their biodegradability, biocompatibility, and controlled release. However, the thermoresponsivity of modified PCL can often lead to premature drug release because their lower critical solution temperature (LCST) is close to physiological temperature conditions. To address this issue, we developed a novel approach that involves functionalizing redox-responsive lipoic acid to the hydrophobic block of PCL. Lipoic acid has disulfide bonds that undergo reversible cross-linking after encapsulating the drug. Herein, we synthesized an ether-linked propargyl-substituted PCL as the hydrophobic block of an amphiphilic copolymer along with unsubstituted PCL. The propargyl group was used to attach lipoic acid through a postpolymerization modification reaction. The hydrophilic block is composed of an ether-linked, thermoresponsive tri(ethylene glycol)-substituted PCL. Anticancer drug doxorubicin (DOX) was encapsulated within the core of the micelles and induced cross-linking in the presence of a reducing agent, dithiothreitol. The developed micelles are thermodynamically stable and demonstrated thermoresponsivity with an LCST value of 37.5 °C but shifted to 40.5 °C after cross-linking. The stability and release of both uncross-linked (LA-PCL) and cross-linked (CLA-PCL) micelles were studied at physiological temperatures. The results indicated that CLA-PCL was stable, and only 35% release was observed after 46 h at 37 °C while LA-PCL released more than 70% drug at the same condition. Furthermore, CLA-PCL was able to release a higher amount of DOX in the presence of glutathione and above the LCST condition (42 °C). Cytotoxicity experiments revealed that CLA-PCL micelles are more toxic toward MDA-MB-231 breast cancer cells at 42 °C than at 37 °C, which supported the thermoresponsive release of the drug. These results indicate that the use of reversible cross-linking is a great approach toward synthesizing stable thermoresponsive micelles with reduced premature drug leakage.

Biodegradable polyester-based nano drug delivery system in cancer chemotherapy: a review of recent progress (2021-2023)

Cancer presents a formidable threat to human health, with the majority of cases currently lacking a complete cure. Frequently, chemotherapy drugs are required to impede its progression. However, these drugs frequently suffer from drawbacks such as poor selectivity, limited water solubility, low bioavailability, and a propensity for causing organ toxicity. Consequently, a concerted effort has been made to seek improved drug delivery systems. Nano-drug delivery systems based on biodegradable polyesters have emerged as a subject of widespread interest in this pursuit. Extensive research has demonstrated their potential for offering high bioavailability, effective encapsulation, controlled release, and minimal toxicity. Notably, poly (ε-caprolactone) (PCL), poly (lactic-co-glycolic acid) (PLGA), and polylactic acid (PLA) have gained prominence as the most widely utilized options as carriers of the nano drug delivery system. This paper comprehensively reviews recent research on these materials as nano-carriers for delivering chemotherapeutic drugs, summarizing their latest advancements, acknowledging their limitations, and forecasting future research directions.

Electrospun PVA Fibers for Drug Delivery: A Review

Innovation in biomedical science is always a field of interest for researchers. Drug delivery, being one of the key areas of biomedical science, has gained considerable significance. The utilization of simple yet effective techniques such as electrospinning has undergone significant development in the field of drug delivery. Various polymers such as PEG (polyethylene glycol), PLGA (Poly(lactic-co-glycolic acid)), PLA(Polylactic acid), and PCA (poly(methacrylate citric acid)) have been utilized to prepare electrospinning-based drug delivery systems (DDSs). Polyvinyl alcohol (PVA) has recently gained attention because of its biocompatibility, biodegradability, non-toxicity, and ideal mechanical properties as these are the key factors in developing DDSs. Moreover, it has shown promising results in developing DDSs individually and when combined with natural and synthetic polymers such as chitosan and polycaprolactone (PCL). Considering the outstanding properties of PVA, the aim of this review paper was therefore to summarize these recent advances by highlighting the potential of electrospun PVA for drug delivery systems.