Effects of Cyclodextrins (β and γ) and l-Arginine on Stability and Functional Properties of Mucoadhesive Buccal Films Loaded with Omeprazole for Pediatric Patients

Optimization of the manufacturing process of a pediatric omeprazole enteric pellets suspension: Full Factorial Design

OBJECTIVE

The purpose of the present study was to apply the design of experiments (DoE) to develop an omeprazole enteric pellets suspension for use in the pediatric population.

METHODOLOGY

This experimental study employed a Full Factorial Design for drug development, encompassing three factors (Aerosil® R972, cetostearyl alcohol, and Span 80) at two levels (2% and 6% for factor A (Aerosil® R972) and 2% and 4% for factors B and C (cetostearyl alcohol and Span 80, respectively)).

RESULTS

Following the statistical optimization, the suspension F10 was formulated and subjected to a stability study for one month. The dissolution test results were suboptimal, achieving only an 22% release. Subsequently, eight additional suspensions were devised using hydrophilic oily vehicles (Labraphac Hydrophile WL 1219, Labrafil M2125 CS, and Labrafil M 1944 CS) and excipients (Gelucire 44/14 and Aerosil® 200) to enhance the dissolution profile. Suspension F17 showed over 75% within 30 min, displaying superior sedimentation time when compared to all other formulations, along with effortless resuspension.

CONCLUSION

The findings suggest that the optimal vehicle for the administration of omeprazole enteric pellets in suspension is the formulation comprising Labrafil M 1944 CS, Span 80, and Aerosil® 200. This study has paved the way for an oily suspension vehicle, opening new avenues of research for developing pediatric omeprazole formulations that fulfill gastro-resistance requirements.

Exploring the potential of mucoadhesive buccal films in geriatric medicine

As the global demographic shifts toward an aging society, the geriatric patient population is steadily increasing. These patients often suffer from comorbidities and require numerous oral medications, which can be especially challenging for dysphagic geriatric patients. Mucoadhesive buccal films (MBFs) seem promising and could reduce pill burden, simplify administration, and enable individualized drug therapy. This review aims to explore the age-related changes in the oral cavity and their impact on MBF delivery, including potential strategies to overcome these age-related barriers to drug delivery. It was observed that aging impacts the oral mucosa as well the properties of the saliva. There are several studies in the application of buccal films including the use of a wide range of permeation enhancers. The 3D printing of buccal films seems to introduce dosing flexibility to buccal film manufacturing.

In Situ Gelling Dexamethasone Oromucosal Formulation: Physical Characteristics Influencing Drug Delivery

The study focuses on the development of an in situ gelling dexamethasone (DEX) oromucosal formulation designed for the treatment of aphthous stomatitis. Three series of formulations were prepared; a first series containing DEX suspended, a second series containing DEX and, in addition, mint essential oil (EO), and a third series containing EO and DEX solubilized in propylene glycol (PG). In the composition, polymers in the role of mucoadhesive agent were interchanged (hydroxypropyl methylcellulose (HPMC), hydroxypropyl cellulose (HPC), hydroxyethyl cellulose (HEC), methyl cellulose (MC), carboxymethyl cellulose (CMC), and sodium carboxymethyl cellulose (NaCMC). Specifically, DEX was incorporated at a concentration of 0.1% (w/w) in each formulation. The influence of mint EO and DEX solubilization on the physical properties (pH measurements, rheological analysis, swelling ability, and texture analysis) and in vitro drug release was studied. Key findings revealed that HPMC-based formulation containing mint EO and PG exhibited best swelling properties (700 ± 46% after 5 h), adequate adhesiveness and in vitro drug release (34.7 ± 5.9%). Furthermore, the irritation potential assessed via the hen's egg test on the chorioallantoic membrane (HET-CAM) demonstrated low irritancy risk. Finally, Fourier-transform infrared spectroscopy (FT-IR) showed no incompatibility between DEX and excipients. Overall, the research highlights the potential of mucoadhesive systems in improving the therapeutic efficacy of oromucosal drug delivery for managing painful oral lesions.

Study of the Effect of Temperature on the Production of Carrageenan-Based Buccal Films and Optimization of the Process Parameters

BACKGROUND/OBJECTIVES

Films in the mouth offer a promising alternative drug delivery system for oral administration, with several advantages over traditional oral formulations. Furthermore, their non-invasive nature and easy administration make them conducive to increasing patient compliance. The use of active agents in these films can further improve their drug delivery properties, making them an even more useful drug delivery system.

METHODS

In this research, carrageenan was used as a polymer, while glycerine was added as a plasticizer, furthermore, lidocaine hydrochloride and diclofenac sodium were used as the active agents. The prepared films were characterized by analytical techniques.

RESULTS

The results showed that glycerine reduced the mucoadhesivity and breaking hardness of the films and increasing the temperature made the films brittle. These results are also confirmed by the statistical analysis. Based on the FTIR results, glycerine can be used in films without structural changes.

CONCLUSIONS

Based on the findings, films prepared from a solution with a concentration of 1.5% carrageenan and 1.5% glycerine at 70 °C are suitable as a drug delivery system for use on the buccal mucosa when combined with active agents. Carrageenan was successfully used as a carrier for two different types of active agents.

Application of Galenic Strategies for Developing Gastro-Resistant Omeprazole Formulation for Pediatrics

OBJECTIVES

This study addresses a critical need in pediatric pharmacotherapy by focusing on the development of an enteric formulation of omeprazole for pediatric use. Omeprazole, a widely used proton pump inhibitor, is essential for treating various gastrointestinal disorders in children. The main objective is to design a compounding formula that can be prepared in hospital pharmacy services without the need for industrial equipment, which is often unavailable in these settings.

METHODS

The research applied different galenic strategies to overcome the challenges of omeprazole's instability in acidic environments and its complex pharmacokinetic and physicochemical properties. The experiments were conducted sequentially, employing salting out, ionic gelation, and matrix granulation strategies. Based on the results obtained, the control conditions and parameters for the various trials were established.

RESULTS

Among the techniques used, wet granulation proved to be the most promising, achieving a gastro-resistance level of 44%. In contrast, the ionic gelation and salting-out techniques did not yield satisfactory results.

CONCLUSIONS

The findings of this study underscore the need to adopt alternative formulation strategies to ensure the stability of omeprazole. This goal requires a multidisciplinary approach and continuous effort to design omeprazole formulations that meet quality standards and appropriate gastro-resistance requirements.

Effects of arginine on coenzyme-Q10 micelle uptake for mitochondria-targeted nanotherapy in phenylketonuria

Phenylketonuria (PKU) is a rare inherited metabolic disease characterized by phenylalanine hydroxylase enzyme deficiency. In PKU patients, coenzyme Q10 (CoQ10) levels were found low. Therefore, we focused on the modification of CoQ10 to load the micelles and increase entry of micelles into the cell and mitochondria, and it is taking a part in ATP turnover. Micelles had produced by comparing two different production methods (thin-film layer and direct-dissolution), and characterization studies were performed (zeta potential, size, and encapsulation efficiency). Then, L-arginine (LARG) and poly-arginine (PARG) were incorporated with the micelles for subsequential release and PKU cell studies. The effects of these components on intracellular uptake and their use in the cellular cycle were analyzed by ELISA, Western blot, membrane potential measurement, and flow cytometry methods. In addition, both effects of LARG and PARG micelles on pharmacokinetics at the cellular level and their cell binding rate were determined. The thin-film method was found superior in micelle preparation. PARG/LARG-modified micelles showed sustained release. In the cellular and mitochondrial uptake of CoQ10, CoQ10-micelle + PARG > CoQ10-micelle + LARG > CoQ10-micelle > CoQ10 was found. This increased localization caused lowering of oxygen consumption rates, but maintaining mitochondrial membrane potential. The study results had showed that besides micelle formulation, PARG and LARG are effective in cellular and mitochondrial targeting.

Pediatric and Geriatric-Friendly Buccal Foams: Enhancing Omeprazole Delivery for Patients Encountering Swallowing Difficulties

Buccal foams containing omeprazole (OME) have been developed as potential drug delivery systems for individuals encountering swallowing difficulties, particularly pediatric and geriatric patients. The buccal foams were formulated from lyophilized aqueous gels of maltodextrin, used as a sweetener, combined with various polymers (alginate, chitosan, gelatin, tragacanth) to fine tune their structural, mechanical, and physicochemical properties. Consistent with the requirements for efficient drug delivery across buccal epithelium, the foam comprised of hydroxypropyl methylcellulose and alginate (HPMC-Alg-OME), exhibited moderate hardness and high mucoadhesion resulting to prolonged residence and increased transport of the active across porcine epithelium. The HPMC-Alg-OME foam induced a 30-fold increase in the drug's apparent permeability across porcine buccal tissue, compared to the drug suspension. The developed buccal foams exhibited excellent stability, as evidenced by the unchanged omeprazole content even after six months of storage under ambient conditions (20 °C and 45% RH). Results indicate that buccal foams of omeprazole may address the stability and ease of administration issues related to oral administration of the drug, particularly for children and elderly patients who have difficulty swallowing solid dosage forms.

Oral disintegration films: applications and production methods

The use of orally disintegrating films (ODF) as a vehicle for the release of active compounds has drawn attention due to the advantages such as ease of swallowing, precise dosage, low thickness, flexibility, greater comfort and acceptability by the patient in relation to oral tablets, for do not require water for administration, it is ideal for people with difficulty in swallowing. In this review, recent advances in ODFs, their applications and production methods will be presented. The production of ODFs uses polymers, plasticizers and active compounds. Among the compounds added to the film that can affect its properties, the polymer used has a strong influence on the disintegration time and on the controlled release of active principles. Polymers used for the production of oral films must be non-toxic, have good wettability and spreadability, and may be of synthetic or natural origin. Regarding the methods used in the production of ODFs, those currently used are solvent evaporation and hot extrusion. However, one of the great challenges for the production of oral films is the scale up, from laboratory to industrial scale, as factors such as heating, mixing speed and temperatures can lead to changes in film quality. Recently, ODFs have been developed as carriers of natural compounds such as vitamins, phenolic compounds, antioxidant and antimicrobial activity. Thus, it was found that orally disintegrating films are an alternative for the release of active compounds, different from those already existing, which justifies the growing interest in this type of film.

Advanced materials for drug delivery across mucosal barriers

Mucus is a viscoelastic gel that traps pathogens and other foreign particles to limit their penetration into the underlying epithelium. Dosage forms containing particle-based drug delivery systems are trapped in mucosal layers and will be removed by mucus turnover. Mucoadhesion avoids premature wash-off and prolongs the residence time of drugs on mucus. Moreover, mucus penetration is essential for molecules to access the underlying epithelial tissues. Various strategies have been investigated to achieve mucoadhesion and mucus penetration of drug carriers. Innovations in materials used for the construction of drug-carrier systems allowed the development of different mucoadhesion and mucus penetration delivery systems. Over the last decade, advances in the field of materials chemistry, with a focus on biocompatibility, have led to the expansion of the pool of materials available for drug delivery applications. The choice of materials in mucosal delivery is generally dependent on the intended therapeutic target and nature of the mucosa at the site of absorption. This review presents an up-to-date account of materials including synthesis, physical and chemical modifications of mucoadhesive materials, nanocarriers, viral mimics used for the construction of mucosal drug delivery systems.

Effects of Sucrose Palmitate on the Physico-Chemical and Mucoadhesive Properties of Buccal Films

In our current research, sucrose palmitate (SP) was applied as a possible permeation enhancer for buccal use. This route of administration is a novelty as there is no literature on the use of SP in buccal mucoadhesive films. Films containing SP were prepared at different temperatures, with different concentrations of SP and different lengths of hydroxypropyl methylcellulose (HPMC) chains. The mechanical, structural, and in vitro mucoadhesive properties of films containing SP were investigated. Tensile strength and mucoadhesive force were measured with a device and software developed in our Institute. Positron annihilation lifetime spectroscopy (PALS) and X-ray powder diffractometry (XRPD) were applied for the structure analysis of the films. Mucoadhesive work was calculated in two ways: from the measured contact angle and compared with direct mucoadhesive work, which measured mucoadhesive force, which is direct mucoadhesion work. These results correlate linearly with a correlation coefficient of 0.98. It is also novel because it is a new method for the determination of mucoadhesive work.

Freeze-Dried Matrices for Buccal Administration of Propranolol in Children: Physico-Chemical and Functional Characterization

Buccal matrices represent a widely accepted dosage form permitting a convenient, easy, reliable drug administration and reducing administration errors. The aim of this study was the development of mucoadhesive buccal matrices for propranolol administration in children. Matrices were obtained by freeze-drying of drug loaded polymeric solutions based on gum tragacanth (GT), pectin (PEC), hydroxypropylmethylcellulose (HPMC), sodium hyaluronate (HA), gelatin (GEL), chitosan (CH) or a mixture of CH and HPMC (CH/HPMC). Matrices were characterized for drug solid state, morphology, water-uptake, mucoadhesion ability, in vitro drug release and permeation through porcine epithelium. The most promising formulations were tested for in vitro biocompatibility in human dental pulp fibroblasts. The preparative method and the polymeric composition influenced the drug solid state, as a complete amorphization as well as different polymorphic forms were observed. GEL and PEC guaranteed a fast and complete drug release due to their rapid dissolution, while for the other matrices the release was influenced by drug diffusion through the viscous gelled matrix. Moreover, matrices based on CH and CH/HPMC showed the best mucoadhesive properties, favoured the drug permeation, in virtue of CH ability to interfere with the lipid organization of biological membrane, and were characterized by a good biocompatibility profile.

Development and Characterization of Inkjet Printed Edible Films for Buccal Delivery of B-Complex Vitamins

Buccal films containing two vitamins, i.e., thiamine hydrochloride (THCl) and nicotinic acid (NA), were fabricated via two-dimensional (2D) inkjet printing. For the preparation of buccal films, solubility studies and rheological evaluations were conducted in distilled water and propylene-glycol (PG) as main solvent and viscosity/surface tension modifier, respectively. The increased solubility in the solvents' mixture indicated that manufacturing of several doses of the THCl and NA is achievable. Various doses were deposited onto sugar-sheet substrates, by increasing the number of printing passes. The physiochemical characterization (SEM, DSC, FTIR) revealed that inkjet printing does not affect the solid state of the matrix. Water uptake studies were conducted, to compare the different vitamin-loaded formulations. The in vitro release studies indicated the burst release of both vitamins within 10 min, a preferable feature for buccal administration. The in vitro permeation studies indicated that higher concentrations of the vitamins onto the sugar sheet improved the in vitro permeation performance of printed formulations.

Advances in Nanoparticulate Drug Delivery Approaches for Sublingual and Buccal Administration

The sublingual and buccal routes of administration have significant advantages for both local and systemic drug delivery. They have shown to be an effective alternative to the traditional oral route, especially when fast onset of action is required. Drugs can be rapidly and directly absorbed into the systemic circulation via venous drainage to the superior vena cava. Therefore, they are useful for drugs that undergo high hepatic clearance or degradation in the gastrointestinal tract, and for patients that have swallowing difficulties. Drugs administered via the sublingual and buccal routes are traditionally formulated as solid dosage forms (e.g., tablets, wafers, films, and patches), liquid dosage forms (e.g., sprays and drops), and semi-solid dosage forms (e.g., gels). Conventional dosage forms are commonly affected by physiological factors, which can reduce the contact of the formulation with the mucosa and lead to unpredictable drug absorption. There have been a number of advances in formulation development to improve the retention and absorption of drugs in the buccal and sublingual regions. This review will focus on the physiological aspects that influence buccal and sublingual drug delivery and the advances in nanoparticulate drug delivery approaches for sublingual and buccal administration. The clinical development pipeline with formulations approved and in clinical trials will also be addressed.

In Vitro Evaluation of 2D-Printed Edible Films for the Buccal Delivery of Diclofenac Sodium

Printing technologies have recently emerged in the development of novel drug delivery systems toward personalized medicine, to improve the performance of formulations, existing bioavailability patterns, and patients' compliance. In the context of two-dimensional printing, this article presents the development of buccal films that are designed to efficiently deliver a class II compound (diclofenac sodium), according to the Biopharmaceutics Classification System (BCS), to the oral cavity. The preparation of drug-loaded inks was carried out based on solubility studies and evaluation of rheological properties, combining ethanol and propylene glycol as optimal solvents. Deposition of the drug was achieved by increasing the number of printing layers onto edible substrates, to produce formulations with dose variance. Thermal analysis, X-ray diffraction, and infrared spectroscopy were used to characterize the developed films. Drug loading and water uptake studies complemented the initial assessment of the films, and preliminary in vitro studies were conducted to further evaluate their performance. The in vitro release profiles were recorded in simulated saliva, presenting the complete release of the incorporated active in a period of 10 min. The effect of multiple layers on the overall performance of films was completed with in vitro permeation studies, revealing the correlation between the number of printed layers and the apparent permeability coefficient.