Antimicrobial Activity of Electrospun Polyvinyl Alcohol Nanofibers Filled with Poly[2-(tert-butylaminoethyl) Methacrylate]-Grafted Graphene Oxide Nanosheets

Fabrication and Testing of Crop Waste Ceiba pentandra Shell Powder Reinforced Biodegradable Composite Films

Ceiba pentandra shell powder (CPSP) biowaste is chosen as a biofiller combined with poly(vinyl alcohol) (PVA) as a matrix to make biofilms to increase the exploitation of biowaste materials and reduce the use of plastic materials. FTIR plots indicated no significant chemical reaction or formation of new functional groups during interaction between PVA and CPSP. XRD diffractograms showed that the crystallinity index (35.3, 38.6, 42.3, 46.4, and 48.5%) and crystalline size (18.14, 20.89, 23.23, 24.87, and 26.34 nm) of biofilms increased with CPSP loading (5-25 wt %). The PVA/CPSP films are thermally stable up to 322 °C. The peak highs of AFM images showed that the films' surface roughness gradually increased from 94.75 nm (5 wt % CPSP) to 320.17 nm (25 wt % CPSP). The FESEM micrographs clarify the homogeneous distribution of CPSP in the PVA matrix. Tensile strength and tensile modulus are noticeably increased by 26.32 and 37.92%, respectively, as a result of the loading of CPSP from 5 to 20 wt % in the PVA matrix. The PVA/CPSP films outperform pure PVA films in UV shielding (350-450 nm). The 59% weight loss of films was estimated during 60 days of burial. The fabricated biofilms maintained their suitable structural, thermal, morphological, and mechanical properties. Additionally, they exhibited consistent performance in ultraviolet (UV) barrier, opacity, water absorption, water vapor permeability, soil burial, and antimicrobial characteristics over time. Overall, PVA/CPSP (5-25 wt %) films are biodegradable and have promising applications as good packaging materials.

Natural Deep Eutectic Solvent Extraction of Bioactive Pigments from Spirulina platensis and Electrospinning Ability Assessment

The first ever nanofibers produced by the electrospinning of polyvinyl alcohol (PVA) and Spirulina platensis extracts are presented in this article. Spirulina platensis extracts were obtained by ultrasound-assisted extraction (UAE) using two different solvents: a glucose/glycerol-based natural deep eutectic solvent (NADES) and water. Through spectrophotometry analysis, it was possible to determine the pigment yield of the extractions for both extracts: phycocyanin = 3.79 ± 0.05 mg/g of dry biomass (DB); chlorophylls = 0.24 ± 0.05 mg/g DB; carotenoids = 0.13 ± 0.03 mg/g DB for the NADES/Spirulina extracts, and phycocyanin = 0.001 ± 0.0005 mg/g DB; chlorophylls = 0.10 ± 0.05 mg/g DB; carotenoids = 0.20 ± 0.05 mg/g DB for water/Spirulina extracts. Emulsions were formed by mixing the microalgae extracts in PVA (9%, w/v) at different concentrations: 5, 20, 40, and 50% (v/v). Electrospinning was carried out at the following conditions: 13 cm of distance to collector; 80 kV of applied voltage; and 85 rpm of electrode rotation. After the nanofibers were collected, they were checked under a scanning electron microscope (SEM). ImageJ was also used to determine fiber diameter and frequency. SEM results showed the formation of nanofibers for 5 and 20% (v/v) of NADES/Spirulina extract content in the electrospinning emulsions, presenting diameters of 423.52 ± 142.61 nm and 680.54 ± 271.92 nm, respectively. FTIR confirmed the presence of the NADES extracts in the nanofibers produced. Overall, the nanofibers produced showed promising antioxidant activities, with the NADES/Spirulina- and PVA-based nanofibers displaying the highest antioxidant activity (47%). The highest antimicrobial activity (89.26%) was also obtained by the NADES/Spirulina and PVA nanofibers (20%, v/v). Principal Component Analysis (PCA) revealed positive correlations between both the antioxidant and antimicrobial activities of the electrospun nanofibers, and extract content in the emulsions. Moreover, PCA also indicated positive correlations between the viscosity and conductivity of the emulsions and the diameter of the nanofibers produced.

Methacrylate Cationic Nanoparticles Activity against Different Gram-Positive Bacteria

Nanotechnology is a developing field that has boomed in recent years due to the multiple qualities of nanoparticles (NPs), one of which is their antimicrobial capacity. We propose that NPs anchored with 2-(dimethylamino)ethyl methacrylate (DMAEMA) have antibacterial properties and could constitute an alternative tool in this field. To this end, the antimicrobial effects of three quaternised NPs anchored with DMAEMA were studied. These NPs were later copolymerized using different methylmethacrylate (MMA) concentrations to evaluate their role in the antibacterial activity shown by NPs. Clinical strains of Staphylococcus aureus, S. epidermidis, S. lugdunensis and Enterococcus faecalis were used to assess antibacterial activity. The minimal inhibitory concentration (MIC) was determined at the different concentrations of NPs to appraise antibacterial activity. The cytotoxic effects of the NPs anchored with DMAEMA were determined in NIH3T3 mouse fibroblast cultures by MTT assays. All the employed NPs were effective against the studied bacterial strains, although increasing concentrations of the MMA added during the synthesis process diminished these effects without altering toxicity in cell cultures. To conclude, more studies with other copolymers are necessary to improve the antibacterial effects of NPs anchored with DMAEMA.

Graphene-Based Materials for Inhibition of Wound Infection and Accelerating Wound Healing

Bacterial infection of the wound could potentially cause serious complications and an enormous medical and financial cost to the rapid emergence of drug-resistant bacteria. Nanomaterials are an emerging technology, that has been researched as possible antimicrobial nanomaterials for the inhibition of wound infection and enhancement of wound healing. Graphene is 2-dimensional (2D) sheet of sp² carbon atoms in a honeycomb structure. It has superior properties, strength, conductivity, antimicrobial, and molecular carrier abilities. Graphene and its derivatives, Graphene oxide (GO) and reduced GO (rGO), have antibacterial activity and could damage bacterial morphology and lead to the leakage of intracellular substances. Besides, for wound infection management, Graphene-platforms could be functionalized by different antibacterial agents such as metal-nanoparticles, natural compounds, and antibiotics. The Graphene structure can absorb near-infrared wavelengths, allowing it to be used as antimicrobial photodynamic therapy. Therefore, Graphene-based material could be used to inhibit pathogens that cause serious skin infections and destroy their biofilm community, which is one of the biggest challenges in treating wound infection. Due to its agglomerated structure, GO hydrogel could entrap and stack the bacteria; thus, it prevents their initial attachment and biofilm formation. The sharp edges of GO could destroy the extracellular polymeric substance surrounding the biofilm and ruin the biofilm biomass structure. As well as, Chitosan and different natural and synthetic polymers such as collagen and polyvinyl alcohol (PVA) also have attracted a great deal of attention for use with GO as wound dressing material. To this end, multi-functional polymers based on Graphene and blends of synthetic and natural polymers can be considered valid non-antibiotic compounds useful against wound infection and improvement of wound healing. Finally, the global wound care market size was valued at USD 20.8 billion in 2022 and is expected to expand at a compound annual growth rate (CAGR) of 5.4% from 2022 to 2027 (USD 27.2 billion). This will encourage academic as well as pharmaceutical and medical device industries to investigate any new materials such as graphene and its derivatives for the treatment of wound healing.

Electrospun Filtering Membrane Designed as Component of Self-Decontaminating Protective Masks

The 2019 coronavirus outbreak and worsening air pollution have triggered the search for manufacturing effective protective masks preventing both particulate matter and biohazard absorption through the respiratory tract. Therefore, the design of advanced filtering textiles combining efficient physical barrier properties with antimicrobial properties is more newsworthy than ever. The objective of this work was to produce a filtering electrospun membrane incorporating a biocidal agent that would offer both optimal filtration efficiency and fast deactivation of entrapped viruses and bacteria. After the eco-friendly electrospinning process, polyvinyl alcohol (PVA) nanofibers were stabilized by crosslinking with 1,2,3,4-butanetetracarboxylic acid (BTCA). To compensate their low mechanical properties, nanofiber membranes with variable grammages were directly electrospun on a meltblown polypropylene (PP) support of 30 g/m². The results demonstrated that nanofibers supported on PP with a grammage of around only 2 g/m² presented the best compromise between filtration efficiencies of PM_0.3, PM_0.5, and PM_3.0 and the pressure drop. The filtering electrospun membranes loaded with benzalkonium chloride (ADBAC) as a biocidal agent were successfully tested against E. coli and S. aureus and against human coronavirus strain HCoV-229E. This new biocidal filter based on electrospun nanofibers supported on PP nonwoven fabric could be a promising solution for personal and collective protection in a pandemic context.

A comprehensive review on the applications of carbon-based nanostructures in wound healing: from antibacterial aspects to cell growth stimulation

A wound is defined as damage to the integrity of biological tissue, including skin, mucous membranes, and organ tissues. The treatment of these injuries is an important challenge for medical researchers. Various materials have been used for wound healing and dressing applications among which carbon nanomaterials have attracted significant attention due to their remarkable properties. In the present review, the latest studies on the application of carbon nanomaterials including graphene oxide (GO), reduced graphene oxide (rGO), carbon dots (CDs), carbon quantum dots (CQDs), carbon nanotubes (CNTs), carbon nanofibers (CNFs), and nanodiamonds (NDs) in wound dressing applications are evaluated. Also, a variety of carbon-based nanocomposites with advantages such as biocompatibility, hemocompatibility, reduced wound healing time, antibacterial properties, cell-adhesion, enhanced mechanical properties, and enhanced permeability to oxygen has been reported for the treatment of various wounds.

CuO loaded ZnS nanoflower entrapped on PVA-chitosan matrix for boosted visible light photocatalysis for tetracycline degradation and anti-bacterial application

Novel photocatalyst CuO loaded ZnS nanoflower supported on carbon frame work PVA/Chitosan was synthesized by co-precipitation and ultrasonic assisted method. The co-existence of ZnS and CuO and its crystallinity in nanohybrid was verified by XRD, SAED and HR-TEM analysis. The availability of defects in ZnS was identified by EPR. FTIR and TGA verified the presence of PVA and Chitosan. Defects mediated ZnS-CuO/PVA/chitosan heterojunction promote synergistic charge separation with type II interface. Zn-vacancy facilitates two-photon excitation that improves visible-light harvesting. The photocatalytic activity of ZnS-CuO/PVA/Chitosan was 94.7% which is higher when compared to ZnS (40%) and CuO (60%). The photocatalytic mechanism was elucidated using scavenger test and both ·O₂^- and ·OH were found to play key role in tetracycline degradation. In addition, ZnS-CuO/PVA/Chitosan demonstrated efficient anti-microbial effect against the both gram strains on comparing with individual ZnS and CuO. Thus, the multifunctional ZnS-CuO/PVA/Chitosan is promising for the photocatalytic degradation of tetracycline and as an antimicrobial agent.

Nanofibrous Membrane with Encapsulated Glucose Oxidase for Self-Sustained Antimicrobial Applications

Polyvinyl alcohol (PVA) nanofibrous membrane, consisting of separately encapsulated glucose oxidase (GOx) and glucose (Glu) nanofibers, was prepared via simultaneously electrospinning PVA/GOx and PVA/Glu dopes. The as-prepared pristine membrane could self-sustainably generate hydrogen peroxide (H2O2) only in contact with an aqueous solution. The H2O2 production level was well maintained even after storing the dry membrane at room temperature for 7 days. Cross-linking the membrane via reaction with glutaraldehyde (GA) vapor could not only prevent the nanofibrous membrane from dissolving in water but also prolonged the release of H2O2. The sustained release of H2O2 from the membrane achieved antimicrobial capability equivalent to that of 1% H2O2 against both Escherichia coli and Staphylococcus aureus. Gram(+) S. aureus cells were more susceptible to H2O2 than Gram(-) E. coli and >99% of S. aureus were killed after 1 h incubation with the membrane. Pristine and GA-crosslinked nanofibrous membrane with in situ production of H2O2 were self-sterilized in which no microorganism contamination on the membrane could be detected after 2 weeks incubation on an agar plate. The GOx/Glu membrane may find potential application as versatile antimicrobial materials in the field of biomedicine, in the food and health industries, and especially challenges related to wound healing in diabetic patients.

Microstructure and Biological Properties of Electrospun In Situ Polymerization of Polycaprolactone-Graft-Polyacrylic Acid Nanofibers and Its Composite Nanofiber Dressings

In this study, polycaprolactone (PCL)- and poly(acrylic acid) (PAA)-based electrospun nanofibers were prepared for the carriers of antimicrobials and designed composite nanofiber mats for chronic wound care. The PCL- and PAA-based electrospun nanofibers were prepared through in situ polymerization starting from PCL and acrylic acid (AA). Different amounts of AA were introduced to improve the hydrophilicity of the PCL electrospun nanofibers. A compatibilizer and a photoinitiator were then added to the electrospinning solution to form a grafted structure composed of PCL and PAA (PCL-g-PAA). The grafted PAA was mainly located on the surface of a PCL nanofiber. The optimization of the composition of PCL, AA, compatibilizer, and photoinitiator was studied, and the PCL-g-PAA electrospun nanofibers were characterized through scanning electron microscopy and 1H-NMR spectroscopy. Results showed that the addition of AA to PCL improved the hydrophilicity of the electrospun PCL nanofibers, and a PCL/AA ratio of 80/20 presented the best composition and had smooth nanofiber morphology. Moreover, poly[2 -(tert-butylaminoethyl) methacrylate]-grafted graphene oxide nanosheets (GO-g-PTA) functioned as an antimicrobial agent and was used as filler for PCL-g-PAA nanofibers in the preparation of composite nanofiber mats, which exerted synergistic effects promoted by the antibacterial properties of GO-g-PTA and the hydrophilicity of PCL-g-PAA electrospun nanofibers. Thus, the composite nanofiber mats had antibacterial properties and absorbed body fluids in the wound healing process, thereby promoting cell proliferation. The biodegradation of the PCL-g-PAA electrospun nanofibers also demonstrated an encouraging result of three-fold weight reduction compared to the neat PCL nanofiber. Our findings may serve as guidelines for the fabrication of electrospun nanofiber composites that can be used mats for chronic wound care.

A tough synthetic hydrogel with excellent post-loading of drugs for promoting the healing of infected wounds in vivo

Bacterial infection is a major obstacle to the wound healing process. The hydrogel dressings with a simpler structure and good antibacterial and wound healing performance are appealing for clinical application. Herein, a robust hydrogel was synthesized from acrylamide (AM), acrylic acid (AA) and N,N'-methylene diacrylamide (MBA) via a redox initiating polymerization. The polymerization conditions were optimized to obtain the hydrogel with minimum unreacted monomers, which were 0.25% and 0.12% for AM and AA, respectively. The hydrogel had good mechanical strength, and could effectively resist damage by external forces and maintain a good macroscopic shape. It showed large water uptake capacity, and could post load a wide range of molecules via hydrogen bonding and electrostatic interaction. Loading of antibiotic doxycycline (DOX) enabled the hydrogel with good antibacterial activity against both Gram-positive bacteria and Gram-negative bacteria in vitro and in vivo. In a rat model of methicillin-resistant Staphylococcus aureus (MRSA)-infected full-thickness skin defect wound, the DOX-loaded hydrogel showed good therapeutic effect. It could significantly promote the wound closure, increased the collagen coverage area, down-regulate the expressions of pro-inflammatory TNF-α and IL-1β factors, and up-regulate the expressions of anti-inflammatory IL-4 factor and CD31 neovascularization factor.

Cationic Polymer-Coated Magnetic Nanoparticles with Antibacterial Properties: Synthesis and In Vitro Characterization

Uniformly sized magnetite nanoparticles (Dn = 16 nm) were prepared by a thermal decomposition of Fe(III) oleate in octadec-1-ene and stabilized by oleic acid. The particles were coated with Sipomer PAM-200 containing both phosphate and methacrylic groups available for the attachment to the iron oxide and at the same time enabling (co)polymerization of 2-(dimethylamino)ethyl methacrylate and/or 2-tert-butylaminoethyl methacrylate at two molar ratios. The poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) and poly[2-(dimethylamino)ethyl methacrylate-co-2-tert-butylaminoethyl methacrylate] [P(DMAEMA-TBAEMA)] polymers and the particles were characterized by 1H NMR spectroscopy, size-exclusion chromatography, transmission electron microscopy, dynamic light scattering, thermogravimetric analysis, magnetometry, and ATR FTIR and atomic absorption spectroscopy. The antimicrobial effect of cationic polymer-coated magnetite nanoparticles tested on both Escherichia coli and Staphylococcus aureus bacteria was found to be time- and dose-responsive. The P(DMAEMA-TBAEMA)-coated magnetite particles possessed superior biocidal properties compared to those of P(DMAEMA)-coated one.

Porous Graphene Composite Polymer Fibres

Since the isolation of graphene, there have been boundless pursuits to exploit the many superior properties that this material possesses; nearing the two-decade mark, progress has been made, but more is yet to be done for it to be truly exploited at a commercial scale. Porous graphene (PG) has recently been explored as a promising membrane material for polymer composite fibres. However, controlling the incorporation of high surface area PG into polymer fibres remain largely unexplored. Additionally, most polymer-graphene composites suffer from low production rates and yields. In this paper, graphene-loaded microfibres, which can be produced at a very high rate and yield have been formed with a carrier polymer, polycaprolactone. For the first time, PG has been incorporated into polymer matrices produced by a high-output manufacturing process and analysed via multiple techniques; scanning electron microscopy (SEM), Raman spectroscopy, Fourier-transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD). Raman spectra showed that single layer graphene structures were achieved, evidence for which was also backed up by the other techniques. Fibres with an average diameter ranging from 3-8 μm were produced with 3-5 wt% PG. Here, we show how PG can be easily processed into polymeric fibres, allowing for widespread use in electrical and ultrafiltration systems.