Thermosensitive Poloxamer-graft-Carboxymethyl Pullulan: A Potential Injectable Hydrogel for Drug Delivery

Pullulan as a sustained release carrier for ocular drug delivery: a review

Pullulan, an exopolysaccharide, obtained from the fungus Aureobasidium pullulans, is a non-ionic, hydrophilic, biodegradable, biocompatible, and tolerogenic polymers that is used for the formulation of bioconjugates in the therapeutic delivery to target different cells and tissues. It is known to possess outstanding film-casting qualities and can produce a clear and biodegradable film. Furthermore, appropriate derivatizing pullulan provides active surfaces that facilitate binding with active pharmaceutical ingredients to the polymer backbone to produce micro/nanoparticulate systems for controlled or sustained drug release. Ophthalmic problems like glaucoma, age-related macular degeneration, and cataracts are very prevalent across the globe, and their treatment options mainly include conventional topical solutions and gels, which possess very low drug-contact time and poor bioavailability, leading to frequent dosing and patient incompliance. Sustained release dosage forms like ocuserts, ocular films, and in-situ gels can help in achieving the intended therapeutic outcomes for an extended duration by minimizing the number of doses. Here, we present a comprehensive critical review of the utilization and application of pullulan, together with its derivatives, to combat problems with ocular medication administration. This article also provides insight for further research on this topic to utilize its advantages to the fullest in the future for improved delivery of therapeutics in the treatment of ocular disorders.

Targeting Injectable Hydrogels: The Role of Diphenylalanine Peptide Derivative in the Gelation Dynamics of Pluronic® F127

The fluorenyl methyl oxycarbonyl phenylalanyl-phenylalanine methyl ester (Fmoc-Phe-Phe-Ome) was synthetized using the liquid phase synthesis strategy. This derivative was separated by hydrophobic interaction chromatography, its purity was analyzed by RP-HPLC and it was characterized by mass spectrometry. This extremely hydrophobic peptide conjugate was incorporated into aqueous solutions of Pluronic® F127 at low temperatures (below 10 °C). The temperature induced sol-gel transition was investigated by rheological measurements. A delay of the sol-gel transition, caused by the presence of low concentrations of Fmoc-Phe-Phe-Ome (up to 1%), enables better control of the gelation process. The viscoelastic properties of hybrid networks were investigated at 37 °C in different shear conditions. The Pluronic/peptide systems reported herein provide promising alternatives for developing innovative injectable gels as suitable platforms in cancer treatment.

Optimizing voriconazole-loaded thermoresponsive hydrogel: in silico tools and ex vivo studies

OBJECTIVE

The present study aims to develop and evaluate the voriconazole-loaded thermoresponsive hydrogel using in silico tools.

METHODS

Poloxamer 407 and PEG 400 were selected as the components from in silico studies for thermoresponsive hydrogel of voriconazole. The cohesive energy density (CED) and solubility parameters (SP) were calculated using Biovia Material Studio 2022 software to predict the polymer-polymer miscibility and drug-polymer miscibility. Different evaluation techniques used to select the optimized formulation. The in vitro antimicrobial activity against Candida albicans was determined for the optimized formulation to illustrate the efficacy of the developed formulation.

RESULTS

Hydrogel containing 15% poloxamer exhibited gelation time of 92.67 ± 3.51 s, and gelation temperature of 36.67 °C with good spreadability of 13.00 ± 0.02 cm2. CED values for poloxamer 407, PEG 400, and Voriconazole individually were found to be 3.23 × 10-8, 3.21 × 10-8, 4.84 × 10-8, respectively, whereas in the combination of poloxamer 407 and PEG 400 was found to 3.85 × 10-8 and in ratio 9:1 was found to be 3.81 × 10-8 indicated the best miscibility between poloxamer 407 and PEG 400 in 9:1 ratio. Based on solvation-free energy of voriconazole (-48.343 kJ/mol) ethanol was selected as the solvent system. Optimized formulation showed the sustained release over the 36 h and good antimicrobial effect.

CONCLUSION

A thermoresponsive hydrogel of voriconazole was developed using Biovia Material Studio 2022, integrating computational predictions and molecular dynamics simulations to streamline polymer and solvent selection. This approach minimized trial-and-error experiments, enabling efficient formulation while enhancing understanding of polymer-polymer and drug-polymer interactions.

Formulations based on pullulan and a derivative as coating material for the food sector

Carboxymethylated derivatives of pullulan (PU) were synthesized and evaluated as coating for the postharvest preservation of blueberries. Carboxymethylpullulan was obtained by etherification reaction with the substitution degrees of 0.52, 0.34, and 0.26 for CMP1, CMP2, and CMP3 respectively. Infrared spectroscopy and nuclear magnetic resonance results showed characteristic signals of the carbonyl group belonging to the carboxymethyl group. Thermal analysis showed that CMP1, CMP2, and CMP3 derivatives presented thermal stability values of 209.91 C, 214.73 C, and 225.52 °C, respectively, and were lower with respect to PU with Td of 238.84 °C. Furthermore, an increase in the glass transition temperature due to carboxymethylation was determined. The chemical modification decreased the contact angle with respect to PU (71.34°) with values for CMP1, CMP2, and CMP3 of 39.89°, 53.72° and 60.61°, respectively. The carboxymethylation also increased the water vapor permeability and mechanical properties of the films. In addition, it was found that the CMP molecules affected the optical properties. The application of CMP-based coatings reduced the mass loss and ripening rate of blueberries compared to native pullulan, therefore, packaging from CMP molecules could be used as a coating capable of delaying ripening and extending the shelf life of fruits.

Synthesis and characterization of injectable thermosensitive hydrogel based on Pluronic-grafted silk fibroin copolymer containing hydroxyapatite nanoparticles as potential for bone tissue engineering

Injectable hydrogels are promising for bone tissue engineering due to their minimally invasive application and adaptability to irregular defects. This study presents the development of pluronic grafted silk fibroin (PF-127-g-SF), a temperature-sensitive graft copolymer synthesized from SF and modified PF-127 via a carbodiimide coupling reaction. The PF-127-g-SF copolymer exhibited a higher sol-gel transition temperature (34 °C at 16 % w/v) compared to PF-127 (23 °C), making it suitable for injectable applications. It also showed improved flexibility and strength, with a yielding point increase from <10 % to nearly 30 %. Unlike PF-127 gel, which degrades within 72 h in aqueous media, the PF-127-g-SF copolymer maintained a stable gel structure for over two weeks due to its robust crosslinked hydrogel network. Incorporating hydroxyapatite nanoparticles (n-HA) into the hydrogel reduced pore size and decreased swelling and degradation rates, extending structural stability to four weeks. Increasing n-HA concentration from 0 % to 20 % reduced porosity from 80 % to 66 %. Rheological studies indicated that n-HA enhanced the scaffold's strength and mechanical properties without altering gelation temperature. Cellular studies with MG-63 cells showed that n-HA concentration influenced cell viability and mineralization, highlighting the scaffold's potential in bone tissue engineering.

Diversity of Bioinspired Hydrogels: From Structure to Applications

Hydrogels are three-dimensional networks with a variety of structures and functions that have a remarkable ability to absorb huge amounts of water or biological fluids. They can incorporate active compounds and release them in a controlled manner. Hydrogels can also be designed to be sensitive to external stimuli: temperature, pH, ionic strength, electrical or magnetic stimuli, specific molecules, etc. Alternative methods for the development of various hydrogels have been outlined in the literature over time. Some hydrogels are toxic and therefore are avoided when obtaining biomaterials, pharmaceuticals, or therapeutic products. Nature is a permanent source of inspiration for new structures and new functionalities of more and more competitive materials. Natural compounds present a series of physico-chemical and biological characteristics suitable for biomaterials, such as biocompatibility, antimicrobial properties, biodegradability, and nontoxicity. Thus, they can generate microenvironments comparable to the intracellular or extracellular matrices in the human body. This paper discusses the main advantages of the presence of biomolecules (polysaccharides, proteins, and polypeptides) in hydrogels. Structural aspects induced by natural compounds and their specific properties are emphasized. The most suitable applications will be highlighted, including drug delivery, self-healing materials for regenerative medicine, cell culture, wound dressings, 3D bioprinting, foods, etc.

Poloxamer/Carboxymethyl Pullulan Aqueous Systems-Miscibility and Thermogelation Studies Using Viscometry, Rheology and Dynamic Light Scattering

Thermally-induced gelling systems based on Poloxamer 407 (PL) and polysaccharides are known for their biomedical applications; however, phase separation frequently occurs in mixtures of poloxamer and neutral polysaccharides. In the present paper, the carboxymethyl pullulan (CMP) (here synthesized) was proposed for compatibilization with poloxamer (PL). The miscibility between PL and CMP in dilute aqueous solution was studied by capillary viscometry. CMP with substitution degrees higher than 0.5 proved to be compatible with PL. The thermogelation of concentrated PL solutions (17%) in the presence of CMP was monitored by the tube inversion method, texture analysis and rheology. The micellization and gelation of PL in the absence or in the presence of CMP were also studied by dynamic light scattering. The critical micelle temperature and sol-gel transition temperature decrease with the addition of CMP, but the concentration of CMP has a peculiar influence on the rheological parameters of the gels. In fact, low concentrations of CMP decrease the gel strength. With a further increase in polyelectrolyte concentration, the gel strength increases until 1% CMP, then the rheological parameters are lowered again. At 37 °C, the gels are able to recover the initial network structure after high deformations, showing a reversible healing process.

Quality by design driven development and evaluation of thermosensitive hydrogel loaded with IgY and LL37-SLNs to combat experimental periodontitis

Egg yolk immunoglobulin (IgY) and LL37, potent antibacterial substances, can fight against periodontitis. This work aimed to develop a locally injectable hydrogel for potential co-delivery of special IgY and LL37-loaded solid lipid nanoparticles (LL37-SLNs) to synergistically inhibit the proliferation of oral pathogens, thus relieving periodontal inflammation and redness. The formulation of thermosensitive hydrogel loaded with IgY and LL37-SLNs was developed by adopting the Quality by Design approach. Then the formulations were optimized by two-factor three-level full factorial design by Design-Expert software. Finally, the optimized formulation was characterized and estimated in vitro and in vivo. In vitro release and antibacterial activity studies have revealed that the optimized formulation was homogeneous and can be released slowly, with sustainably antibacterial power. And the physical and chemical composition analysis and morphological observations further confirmed the sustained-release capability. On the other hand, in vivo studies proved that the optimized formulation significantly decreased gingival redness, bleeding, and plaque formation, avoided excessive resorption of alveolar bone, and reduced the levels of inflammatory factor in periodontitis rats. In conclusion, the optimized thermosensitive hydrogel loaded with IgY and LL37-SLNs may be a promising local sustained-release preparation for the effective treatment of periodontal diseases.

Microbial Exopolysaccharide Composites in Biomedicine and Healthcare: Trends and Advances

Microbial exopolysaccharides (EPSs), e.g., xanthan, dextran, gellan, curdlan, etc., have significant applications in several industries (pharma, food, textiles, petroleum, etc.) due to their biocompatibility, nontoxicity, and functional characteristics. However, biodegradability, poor cell adhesion, mineralization, and lower enzyme activity are some other factors that might hinder commercial applications in healthcare practices. Some EPSs lack biological activities that make them prone to degradation in ex vivo, as well as in vivo environments. The blending of EPSs with other natural and synthetic polymers can improve the structural, functional, and physiological characteristics, and make the composites suitable for a diverse range of applications. In comparison to EPS, composites have more mechanical strength, porosity, and stress-bearing capacity, along with a higher cell adhesion rate, and mineralization that is required for tissue engineering. Composites have a better possibility for biomedical and healthcare applications and are used for 2D and 3D scaffold fabrication, drug carrying and delivery, wound healing, tissue regeneration, and engineering. However, the commercialization of these products still needs in-depth research, considering commercial aspects such as stability within ex vivo and in vivo environments, the presence of biological fluids and enzymes, degradation profile, and interaction within living systems. The opportunities and potential applications are diverse, but more elaborative research is needed to address the challenges. In the current article, efforts have been made to summarize the recent advancements in applications of exopolysaccharide composites with natural and synthetic components, with special consideration of pharma and healthcare applications.

3D Printing of Cellulase-Laden Cellulose Nanofiber/Chitosan Hydrogel Composites: Towards Tissue Engineering Functional Biomaterials with Enzyme-Mediated Biodegradation

The 3D printing of a multifunctional hydrogel biomaterial with bioactivity for tissue engineering, good mechanical properties and a biodegradability mediated by free and encapsulated cellulase was proposed. Bioinks of cellulase-laden and cellulose nanofiber filled chitosan viscous suspensions were used to 3D print enzymatic biodegradable and biocompatible cellulose nanofiber (CNF) reinforced chitosan (CHI) hydrogels. The study of the kinetics of CNF enzymatic degradation was studied in situ in fibroblast cell culture. To preserve enzyme stability as well as to guarantee its sustained release, the cellulase was preliminarily encapsulated in chitosan-caseinate nanoparticles, which were further incorporated in the CNF/CHI viscous suspension before the 3D printing of the ink. The incorporation of the enzyme within the CHI/CNF hydrogel contributed to control the decrease of the CNF mechanical reinforcement in the long term while keeping the cell growth-promoting property of chitosan. The hydrolysis kinetics of cellulose in the 3D printed scaffolds showed a slow but sustained degradation of the CNFs with enzyme, with approximately 65% and 55% relative activities still obtained after 14 days of incubation for the encapsulated and free enzyme, respectively. The 3D printed composite hydrogels showed excellent cytocompatibility supporting fibroblast cell attachment, proliferation and growth. Ultimately, the concomitant cell growth and biodegradation of CNFs within the 3D printed CHI/CNF scaffolds highlights the remarkable potential of CHI/CNF composites in the design of tissue models for the development of 3D constructs with tailored in vitro/in vivo degradability for biomedical applications.

Molecular Dynamics-Assisted Design of High Temperature-Resistant Polyacrylamide/Poloxamer Interpenetrating Network Hydrogels

Polyacrylamide has promising applications in a wide variety of fields. However, conventional polyacrylamide is prone to hydrolysis and thermal degradation under high temperature conditions, resulting in a decrease in solution viscosity with increasing temperature, which limits its practical effect. Herein, combining molecular dynamics and practical experiments, we explored a facile and fast mixing strategy to enhance the thermal stability of polyacrylamide by adding common poloxamers to form the interpenetrating network hydrogel. The blending model of three synthetic polyacrylamides (cationic, anionic, and nonionic) and poloxamers was first established, and then the interaction process between them was simulated by all-atom molecular dynamics. In the results, it was found that the hydrogen bonding between the amide groups on all polymers and the oxygen-containing groups (ether and hydroxyl groups) on poloxamers is very strong, which may be the key to improve the high temperature resistance of the hydrogel. Subsequent rheological tests also showed that poloxamers can indeed significantly improve the stability and viscosity of nonionic polyacrylamide containing only amide groups at high temperatures and can maintain a high viscosity of 3550 mPa·S at 80 °C. Transmission electron microscopy further showed that the nonionic polyacrylamide/poloxamer mixture further formed an interpenetrating network structure. In addition, the Fourier transform infrared test also proved the existence of strong hydrogen bonding between the two polymers. This work provides a useful idea for improving the properties of polyacrylamide, especially for the design of high temperature materials for physical blending.

Bioinspired Hydrogels as Platforms for Life-Science Applications: Challenges and Opportunities

Hydrogels, as interconnected networks (polymer mesh; physically, chemically, or dynamic crosslinked networks) incorporating a high amount of water, present structural characteristics similar to soft natural tissue. They enable the diffusion of different molecules (ions, drugs, and grow factors) and have the ability to take over the action of external factors. Their nature provides a wide variety of raw materials and inspiration for functional soft matter obtained by complex mechanisms and hierarchical self-assembly. Over the last decade, many studies focused on developing innovative and high-performance materials, with new or improved functions, by mimicking biological structures at different length scales. Hydrogels with natural or synthetic origin can be engineered as bulk materials, micro- or nanoparticles, patches, membranes, supramolecular pathways, bio-inks, etc. The specific features of hydrogels make them suitable for a wide variety of applications, including tissue engineering scaffolds (repair/regeneration), wound healing, drug delivery carriers, bio-inks, soft robotics, sensors, actuators, catalysis, food safety, and hygiene products. This review is focused on recent advances in the field of bioinspired hydrogels that can serve as platforms for life-science applications. A brief outlook on the actual trends and future directions is also presented.