Preparation and Chemical and Physical Characteristics of an Edible Film Based on Native Potato Starch and Nopal Mucilage

Development and Characterization of Potato Starch-Pectin-Based Active Films Enriched With Juniper Berry Essential Oil for Food Packaging Applications

The increasing demand for sustainable food packaging has driven the development of films based on biopolymers. However, enhancing their functional properties remains a challenge. In the current study, potato starch-pectin (PSP) composite films were fabricated and enriched with juniper berry essential oil (JBEO) to improve their physicochemical properties. The effects of incorporating different concentrations of JBEO (0.1%-1% v/v) on various properties of PSP-based films were evaluated, including surface color, transparency, barrier properties, scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermal analysis (TGA and DTA), antioxidant activity, and antimicrobial effectiveness. Increasing the level of JBEO led to a significant decrease in the moisture content, film transparency, and mechanical attributes, while an increase in thickness, water permeability, and film elongation was observed. SEM analysis also revealed morphological properties such as some spherical, bubble-like configuration and cracks on the surface due to an increase in JBEO concentration. TGA and DTA revealed lower weight loss in the initial cycles due to the addition of JBEO, and the thermal stability of the films improved. The antioxidant assays revealed a concentration-dependent increase in the radical scavenging capacity of the films from 11.31% to 17.28% for DPPH and from 3.06% to 25.53% for ABTS. Moreover, significant antibacterial and antifungal activity of the bioactive films was observed against P. aeruginosa, S. aureus, and C. albicans. These findings suggest that JBEO enhances the functional properties of PSP films, making them suitable for active food packaging applications.

Storage Potential of Cactus Mucilage Powder for Incorporation into Foods and Production of Biopolymeric Films

The objective was to investigate the physicochemical stability of stored cactus pear mucilage and assess the technological feasibility to produce polymeric films. Mucilage of cactus pear species Nopalea cochenillifera (L.) Salm-Dyck MIU and Opuntia stricta (Haw.) Haw-OEM was extracted and stored for 2, 4, 6, 8, and 10 months in the absence of light at a temperature of 26.5 °C and relative humidity of 41.3%. At each storage time, polymeric films were produced using hydrated mucilage (4%, weight-w/volume-(v)), glycerol (60%, v/v), and calcium lactate (2%, w/v). Among the species, MIU stood out due to its higher water and oil retention, but it also presented higher levels of phenolic compounds, and more intense peaks in Fourier transform infrared spectrophotometry (FTIR) analysis. On the other hand, OEM is richer in carbohydrates, denser, and electrically conductive. The characteristics highlighted for each species are also observed in the principal component analysis (PCA). Both species are equally soluble in water, and more than 60% of their granules have a diameter of 250 mm. The resulting films of MIU exhibited increased resistance and permeability but were less soluble and transparent. Microscopically, greater homogeneity was observed, and the films were thicker, whitish, and thermally stable. Both species have the potential for producing polymeric films with various applications in the food industry, particularly as edible coatings.

Development of Edible Films Based on Nostoc and Modified Native Potato Starch and Their Physical, Mechanical, Thermal, and Microscopic Characterization

Considering the potential of biopolymers from underutilized Andean sources in Peru to improve the characteristics of edible films, this work aimed to evaluate the formation of a polymeric matrix composed of Nostoc and modified potato starch for the formulation of edible films for food coating. The effects of polymer matrix ratio and drying temperature on films obtained by thermoforming were studied, determining the water vapor permeability and mechanical properties using a multifactorial design. Additionally, thermal properties were characterized by TGA and DSC, and structural properties by FT-IR and scanning electron microscopy. The results showed that the films exhibited lower solubility, lighter hues, better water vapor resistance, higher tensile strength, and improved thermal stability with increasing modified starch content. The formulation with higher Nostoc content exhibited a more homogeneous surface according to microscopy images, and no new chemical bonds were formed by adding modified starch and Nostoc to the polymer matrix, according to FT-IR spectra. These findings are promising and suggest using Nostoc for elaborating edible films composed of native and modified starch from native Andean potatoes as bio-based materials with potential application in the food industry.

A High Andean Hydrocolloid Extracted by Microatomization: Preliminary Optimization in Aqueous Stability

Aqueous suspensions rely on electrostatic interactions among suspended solids, posing a significant challenge to maintaining stability during storage, particularly in the food and pharmaceutical industries, where synthetic stabilizers are commonly employed. However, there is a growing interest in exploring new materials derived from natural and environmentally friendly sources. This study aimed to optimize the stability parameters of a novel Altoandino Nostoc Sphaericum hydrocolloid (NSH) extracted via micro atomization. Suspensions were prepared by varying the pH, gelatinization temperature and NSH dosage using a 23 factorial arrangement, resulting in eight treatments stored under non-controlled conditions for 20 days. Stability was assessed through turbidity, sedimentation (as sediment transmittance), ζ potential, particle size, color and UV-Vis scanning. Optimization of parameters was conducted using empirical equations, with evaluation based on the correlation coefficient (R2), average relative error (ARE) and X2. The suspensions exhibited high stability throughout the storage period, with optimized control parameters identified at a pH of 4.5, gelatinization temperature of 84.55 °C and NSH dosage of 0.08 g/L. Simulated values included turbidity (99.00%), sedimentation (72.34%), ζ potential (-25.64 mV), particle size (300.00 nm) and color index (-2.00), with simulated results aligning with practical application. These findings suggest the potential use of NSH as a substitute for commercial hydrocolloids, albeit with consideration for color limitations that require further investigation.

Linden-based mucilage biodegradable films: A green perspective on functional and sustainable food packaging

This study focuses on the utilization of linden mucilage, extracted from the linden tree, as a potential natural polymer source for the production of composite films. The films, which incorporating linden water extract, essential oil, and oil, exhibited improved thermal stability, surface morphology, and water resistance. Biodegradability assessments, particularly for films using essential oil and oil, showed promising outcomes by maintaining structural integrity. Antimicrobial assays demonstrated significant resistance against pathogens, indicating potential applications requiring microbial resistance. Mechanical analyses revealed a trade-off between tensile strength and elongation at break with addition of components. Composite films exhibited reduced water vapor permeability which correlate with water solubility and contact angle measurements. Soil biodegradation studies highlighted the films' potential to mitigate environmental impact. Cytotoxicity tests confirmed the safety of these films for potential food applications. Additionally, antioxidant assays showed increased radical scavenging activity in films with added components. In conclusion, linden-based composite films exhibit promising characteristics, suggesting their potential as sustainable and functional materials, particularly for use in food packaging.

Stability in Aqueous Solution of a New Spray-Dried Hydrocolloid of High Andean Algae Nostoc sphaericum

There is a growing emphasis on seeking stabilizing agents with minimal transformation, prioritizing environmentally friendly alternatives, and actively contributing to the principles of the circular economy. This research aimed to assess the stability of a novel spray-dried hydrocolloid from high Andean algae when introduced into an aqueous solution. Nostoc sphaericum freshwater algae were subject to atomization, resulting in the production of spray-dried hydrocolloid (SDH). Subsequently, suspension solutions of SDH were meticulously prepared at varying pH levels and gelling temperatures. These solutions were then stored for 20 days to facilitate a comprehensive evaluation of their stability in suspension. The assessment involved a multifaceted approach, encompassing rheological analysis, scrutiny of turbidity, sedimentation assessment, ζ-potential, and measurement of particle size. The findings from these observations revealed that SDH exhibits a dilatant behavior when in solution, signifying an increase in with higher shear rate. Furthermore, it demonstrates commendable stability when stored under ambient conditions. SDH is emerging as a potential alternative stabilizer for use in aqueous solutions due to its easy extraction and application.

Effect of Inlet Air Temperature and Quinoa Starch/Gum Arabic Ratio on Nanoencapsulation of Bioactive Compounds from Andean Potato Cultivars by Spray-Drying

Nanoencapsulation of native potato bioactive compounds by spray-drying improves their stability and bioavailability. The joint effect of the inlet temperature and the ratio of the encapsulant (quinoa starch/gum arabic) on the properties of the nanocapsules is unknown. The purpose of this study was to determine the best conditions for the nanoencapsulation of these compounds. The effects of two inlet temperatures (96 and 116 °C) and two ratios of the encapsulant (15 and 25% w/v) were evaluated using a factorial design during the spray-drying of native potato phenolic extracts. During the study, measurements of phenolic compounds, flavonoids, anthocyanins, antioxidant capacity, and various physical and structural properties were carried out. Higher inlet temperatures increased bioactive compounds and antioxidant capacity. However, a higher concentration of the encapsulant caused the dilution of polyphenols and anthocyanins. Instrumental analyses confirmed the effective encapsulation of the nuclei in the wall materials. Both factors, inlet temperature, and the encapsulant ratio, reduced the nanocapsules' humidity and water activity. Finally, the ideal conditions for the nanoencapsulation of native potato bioactive compounds were determined to be an inlet temperature of 116 °C and an encapsulant ratio of 15% w/v. The nanocapsules obtained show potential for application in the food industry.

Native Potato Starch and Tara Gum as Polymeric Matrices to Obtain Iron-Loaded Microcapsules from Ovine and Bovine Erythrocytes

Iron deficiency leads to ferropenic anemia in humans. This study aimed to encapsulate iron-rich ovine and bovine erythrocytes using tara gum and native potato starch as matrices. Solutions containing 20% erythrocytes and different proportions of encapsulants (5, 10, and 20%) were used, followed by spray drying at 120 and 140 °C. Iron content in erythrocytes ranged between 2.24 and 2.52 mg of Fe/g; microcapsules ranged from 1.54 to 2.02 mg of Fe/g. Yields varied from 50.55 to 63.40%, and temperature and encapsulant proportion affected moisture and water activity. Various red hues, sizes, and shapes were observed in the microcapsules. SEM-EDS analysis revealed the surface presence of iron in microcapsules with openings on their exterior, along with a negative zeta potential. Thermal and infrared analyses confirmed core encapsulation within the matrices. Iron release varied between 92.30 and 93.13% at 120 min. Finally, the most effective treatments were those with higher encapsulant percentages and dried at elevated temperatures, which could enable their utilization in functional food fortification to combat anemia in developing countries.

Microencapsulation of Propolis and Honey Using Mixtures of Maltodextrin/Tara Gum and Modified Native Potato Starch/Tara Gum

Ethanolic extracts of propolis and bee honey contain substances beneficial to human health. Mixtures of wall materials were compared in spray-drying microencapsulation of ethanolic extracts of propolis and bee honey rich in bioactive compounds. Maltodextrin and tara gum were used to obtain microencapsulates A, and modified native potato starch and tara gum were used for microencapsulates B. High values of phenolic compounds, flavonoids, and antioxidant capacity were obtained in microcapsules A and B, and the results obtained in terms of encapsulation efficiency, yield, hygroscopicity, solubility, moisture, Aw, bulk density, and color were typical of the spray-drying process. On the other hand, spherical and elliptical microparticles of sizes between 7.83 and 53.7 µm with light and medium stability were observed. Thermogravimetric properties were similar in both microencapsulates; total organic carbon, SEM-EDS, and FTIR analyses corroborated the encapsulation. X-ray diffractogram exhibited amorphous structures, and the release kinetics of phenolic compounds presented high values from 8.13 to 12.58 mg GAE/g between 7 and 13 h. Finally, modified potato starch is a better encapsulant than maltodextrin because it has better core protection and controlled release of the encapsulated bioactive compounds.

Combined coagulation-electrocoagulation process using biocoagulant from the Opuntia ficus-indica for treatment of cheese whey wastewater

This work reports a combined coagulation-electrocoagulation process using a biocoagulant from the Opuntia ficus-indica for treatment of cheese whey wastewater. The process parameters as pH, biocoagulant dosage, and current density were evaluated from the chemometric tools. A Box-Behnken design was used, having as responses the removal percentages of turbidity and chemical oxygen demand (COD). The results showed that for the studied variable ranges, linear models were obtained and the pH was parameter more significant for treatment proposed. The pH showed synergic effect with the investigated parameters, while the biocoagulant dosage and density current showed antagonistic effects. The desirability function was used to optimization of process, and suggested values were pH 10.0, biocoagulant dosage of 4.4 g L^-1, and current density of 31.5 mA cm^-2, which showed removals of turbidity and COD of 98.9 and 83.8%, respectively.

Development of a Halochromic, Antimicrobial, and Antioxidant Starch-Based Film Containing Phenolic Extract from Jaboticaba Peel

In this study, the antioxidant, antimicrobial, mechanical, optical, and barrier attributes of Solanum lycocarpum starch bio-based edible films incorporated with a phenolic extract from jaboticaba peel were investigated. Aiming to determine the effect of the polymers and the phenolic extract on the properties of the films, a three-factor simplex-lattice design was employed, and the formulation optimization was based on the produced films' antioxidant potential. The optimized formulation of the starch-PEJP film showed a reddish-pink color with no cracks or bubbles and 91% antioxidant activity against DPPH radical. The optimized starch-PEJP film showed good transparency properties and a potent UV-blocking action, presenting color variation as a function of the pH values. The optimized film was also considerably resistant and highly flexible, showing a water vapor permeability of 3.28 × 10-6 g m-1 h-1 Pa-1. The microbial permeation test and antimicrobial evaluation demonstrated that the optimized starch-PEJP film avoided microbial contamination and was potent in reducing the growth of Escherichia coli, Staphylococcus aureus, and Salmonella spp. In summary, the active starch-PEJP film showed great potential as an environmentally friendly and halochromic material, presenting antioxidant and antimicrobial properties and high UV-protecting activity.

Effect of the Addition of Corn Husk Cellulose Nanocrystals in the Development of a Novel Edible Film

The cellulose from agroindustrial waste can be treated and converted into nanocrystals or nanofibers. It could be used to produce biodegradable and edible films, contributing to the circular economy and being environmentally friendly. This research aimed to develop an edible film elaborated with activated cellulose nanocrystals, native potato starch, and glycerin. The activated cellulose nanocrystals were obtained by basic/acid digestion and esterification with citric acid from corn husks. The starch was extracted from the native potato cultivated at 3500 m of altitude. Four film formulations were elaborated with potato starch (2.6 to 4.4%), cellulose nanocrystals (0.0 to 0.12%), and glycerin (3.0 to 4.2%), by thermoforming at 60 °C. It was observed that the cellulose nanocrystals reported an average size of 676.0 nm. The films mainly present hydroxyl, carbonyl, and carboxyl groups that stabilize the polymeric matrix. It was observed that the addition of cellulose nanocrystals in the films significantly increased (p-value < 0.05) water activity (0.409 to 0.447), whiteness index (96.92 to 97.27), and organic carbon content. In opposition to gelatinization temperature (156.7 to 150.1 °C), transparency (6.69 to 6.17), resistance to traction (22.29 to 14.33 N/mm), and solubility in acidic, basic, ethanol, and water media decreased. However, no significant differences were observed in the thermal decomposition of the films evaluated through TGA analysis. The addition of cellulose nanocrystals in the films gives it good mechanical and thermal resistance qualities, with low solubility, making it a potential food-coating material.

Effect of the Application of a Coating Native Potato Starch/Nopal Mucilage/Pectin on Physicochemical and Physiological Properties during Storage of Fuerte and Hass Avocado (Persea americana)

The avocado fruit is an agro-industrial product with high export demand in Peru due to its sensory and nutritional qualities, which can be affected during storage. The study aimed to evaluate the effect of the application of a coating formulated with potato starch (Solanum tuberosum ssp andigena), nopal mucilage (Opuntia ficus indica), and pectin on the physicochemical and physiological properties during the storage of Fuerte and Hass avocados. Samples were taken in their harvest state from the plantation in “Occobamba”, which is cultivated by the Avocado Producers Association in Chincheros, Apurímac, Peru. Physicochemical properties (titratable acidity, pH, total soluble solids) and physiological properties (weight loss, firmness, and color L* a* b*) were determined during 20 days of storage at 20 °C. The elaborated films present high transparency and low aw values. In the coated avocado of the Hass and Fuerte varieties, acidity and total soluble solids decreased significantly (p-value < 0.05) during the storage time. Weight loss and firmness of coated fruits decrease to a lesser extent. Luminosity L*, color index, and color variation showed better attributes for the coated samples. The use of coatings made with potato starch, nopal mucilage, and pectin allows the physicochemical and physiological properties of avocado fruits to be maintained for a longer time during storage.

Preliminary Characterization of a Spray-Dried Hydrocolloid from a High Andean Algae (Nostoc sphaericum)

The search for new natural sources of hydrocolloids with stabilizing, thickening, and good binding capacity, from raw materials that are environmentally friendly and that contribute to the circular economy is a challenge for the food industry. The aim of the study was the preliminary characterization of a spray-dried hydrocolloid from high Andean algae Nostoc sphaericum. Four ecotypes of algae from Peruvian high Andean lagoons located above 4000 m were considered. The samples were collected in the period March−April 2021 and were subjected to a spray drying process in an aqueous medium. The characterization showed that the dehydrated nostoc ecotypes presented high protein and carbohydrate content, making it a potential material for direct use as a functional food for humans. The spray-dried product presented good stability for its use as a hydrocolloid, with zeta potential values (ζ), around 30 mV, evidencing the presence of -CO-, -OH, -COO-, and -CH groups, characteristic of polysaccharides, representing 40% of total organic carbon on average, giving it low water activity values and particle size at the nanometric level. Major minerals such as Ca (>277 mg/100 g), Mg (>19.7 mg/100 g), and Fe (>7.7 mg/100 g) were reported. Spray-dried nostoc is a hydrocolloid material with high potential for the food industry, with good nutritional content and techno-functional behavior.