Solubility and Dissolution Enhancement of Dexibuprofen with Hydroxypropylbetacyclodextrin (HPβCD) and Poloxamers (188/407) Inclusion Complexes: Preparation and In Vitro Characterization

Towards Enhanced Solubility of Cannabidiol: Preparation and Evaluation of Cannabidiol Solid Dispersions Using Vacuum Compression Molding

The present study aims to develop and characterize cannabidiol (CBD) solid dispersions using Vacuum Compression Molding (VCM) to enhance the drug solubility and release profile. Solid dispersions of CBD and polymers were processed using VCM at 130 °C for 4 min after a prior physical mixing. Five percent w/w of CBD was used with 5% w/w of poloxamer 188 and 90% w/w of polymeric carrier (Polyethylene Oxide, PEO-N80 or Hydroxypropyl cellulose, HPCEF). Discs were collected and milled to obtain formulations (F1V, F2V). The degradation temperature of CBD was determined using Thermogravimetric Analysis (TGA). The formulations were further characterized using differential scanning calorimetry (DSC), scanning electron microscopy (SEM), and Fourier-Transform Infrared Spectroscopy (FTIR). In vitro dissolution testing of pure CBD and formulations was evaluated using USP apparatus II. TGA showed that CBD degradation occurs after 200 °C. FTIR spectra of formulations indicate potential interactions between the drug and polymers. DSC thermograms of F1V showed a thermal peak at 65 °C that could correspond to PEO-N80. F2V did not show any of the thermal event peaks, which suggests the conversion of the drug to the amorphous state. Images from the SEM showed irregular surfaces for both formulations. The release profile showed an increase in the CBD dissolution rate by 4.75 folds for F1V and 3.63 folds for F2V in four hours. In this study, solid dispersions of CBD formulations were successfully achieved. The VCM technology has proven to be successful in formulating solid dispersions of CBD for early-stage drug development.

Controlled Release of the Anticancer Drug Cyclophosphamide from a Superparamagnetic β-Cyclodextrin Nanosponge by Local Hyperthermia Generated by an Alternating Magnetic Field

A β-cyclodextrin (β-CD) nanosponge (NS) was synthesized using diphenyl carbonate (DPC) as a cross-linker to encapsulate the antitumor drug cyclophosphamide (CYC), thus obtaining the NSs-CYC system. The formulation was then associated with magnetite nanoparticles (MNPs) to develop the MNPs-NSs-CYC ternary system. The formulations mentioned above were characterized to confirm the deposition of the MNPs onto the organic matrix and that the superparamagnetic nature of the MNPs was preserved upon association. The association of the MNPs with the NSs-drug complex was confirmed through field emission scanning electron microscopy, energy dispersive spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, dynamic light scattering, ζ-potential, atomic absorption spectroscopy, X-ray powder diffraction, selected area electron diffraction, and vibrating-sample magnetometer. The superparamagnetic properties of the ternary system allowed the release of CYC by utilizing magnetic hyperthermia upon the exposure of an alternating magnetic field (AMF). The drug release experiments were carried out at different frequencies and intensities of the magnetic field, complying with the "Atkinson-Brezovich criterion". The assays in AMF showed the feasibility of release by controlling hyperthermia of the drug, finding that the most efficient conditions were F = 280 kHz, H = 15 mT, and a concentration of MNPs of 5 mg/mL. CYC release was temperature-dependent, facilitated by local heat generation through magnetic hyperthermia. This phenomenon was confirmed by DFT calculations. Furthermore, the ternary systems outperformed the formulations without MNPs regarding the amount of released drug. The MTS (3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium) assays demonstrated that including CYC within the magnetic NS cavities reduced the effects on mitochondrial activity compared to those observed with the free drug. Finally, the magnetic hyperthermia assays showed that the tertiary system allows the generation of apoptosis in HeLa cells, demonstrating that the MNPs embedded maintain their properties to generate hyperthermia. These results suggest that using NSs associated with MNPs could be a potential tool for a controlled drug delivery in tumor therapy since the materials are efficient and potentially nontoxic.

A strategy to reduce the bitterness of green tea extract: Preparation of cyclodextrin inclusion and assessment of its antioxidant activity and stability

Green tea extract (GTE) is rich in polyphenols that are the main body of functional activity, but the natural bitterness greatly restricts its applications in food areas. In this study, the effect of β-cyclodextrin (β-CD) on the bitterness and properties of GTE were investigated. The bitterness intensity was evaluated by determination of catechin content and the electronic tongue analysis. It was found that the bitterness of GTE decreased significantly by complexing with 20 % β-CD. Subsequently, the physicochemical properties were determined, including the determination of functional substances by high performance liquid chromatography, as well as the assessment of antioxidant activity and stability under different conditions (heat, acid/base, time). It was found that β-CD inclusion of active substances in GTE protected its functional components and delayed the deactivation rate. Additionally, the formation of a complex between β-CD and components of GTE was confirmed by UV-vis, FT-IR, thermogravimetric analysis, and scanning electron microscope. Therefore, the findings of the present work suggest that the masking of bitter substances and the protection of functional components of GTE through preparing the β-CD inclusion is a feasible way to expand its applications.

Dexibuprofen loaded into nanoemulsion based gel for topical application - In vitro characterization and in vivo anti-inflammatory evaluation

Arthritic disease is one of the most common diseases in adults and a leading cause of joint degeneration. Dexibuprofen (DEX) is routinely used for the treatment of rheumatoid arthritis, acute postoperative pain, primary dysmenorrheal, and in lower back pain. However, it is poorly water soluble with compromised bioavailability, and hence has limited therapeutic activity. In order to overcome these issues, we studied the formulation and characterization of nanoemulsion based system i.e nanoemulgel of DEX. This study aimed to prepare topical nanoemulgel containing 2 % DEX and solubility-enhanced DEX via ternary inclusion complexation (DEX-SE-T) and to compare it with commercially available 5 % Ibuprofen gel as there is no topical formulation of DEX is available in the market currently. A pseudoternary phase diagram was constructed using the spontaneous water titration method. Blank and drug-loaded nanoemulgel were prepared using a high-speed homogenization method. All the formulations were evaluated in terms of particle size, pH, conductivity, viscosity, zeta potential, and ex vivo drug permeation. DEX loaded nanoemulgel yield enhanced in vitro skin permeation than the commercially available 5 % ibuprofen gel. The optimized nanoemulgel formulation (DEX-SE-T) was tested in in vivo anti-inflammatory models including cotton pellets-induced abdominal granuloma (chronic inflammation) and carrageenan-induced paw edema (acute inflammation). DEX-SE-T loaded nanoemulgel has improved in vivo anti-inflammatory activity as compared to ibuprofen gel. DEX-SE-T could be a promising option for effective topical treatment of inflammatory conditions.

Implementing losartan potassium-laden pegylated nanocubic vesicles as a novel nanoplatform to alleviate cisplatin-induced nephrotoxicity via blocking apoptosis and activating the wnt/β-catenin/TCF-4 pathway

AIMS

Losartan potassium-laden pegylated nanocubic vesicles (LP-NCVs-PEG) have an intriguing kidney-targeted nanoplatform for acute renal injury via blocking apoptosis and activating wnt/β-catenin pathway.

MAIN METHODS

Utilizing a thin-film hydration methodology established on 42 full factorial design to produce LP loaded nanocubic formulations (LP-NCVs) which composed mainly from L-α-phosphatidylcholine and poloxamer. The optimization process was designed to select the formulation with maximum entrapment efficiency (EE %), maximum in-vitro drug release (Q8h), and minimum vesicle size (VS). The optimum formulation was then pegylated to obtain LP-NCVs-PEG formulation that shields NCVs from the harsh ecosystem of the stomach, improves their oral drug delivery performance and targets the proximal renal tubules with no systemic toxicity. Male albino rats were injected with Cisplatin (6 mg/kg, i.p.) alone or with LP-formulations (5 mg/kg/day). Kidney injury markers, inflammatory markers, apoptotic markers. Besides renal tissue expression of Wnt, β-Catenin, GSK-3β, renal RNA gene expression of TCF-4, LEF-1 and histopathology were also analyzed to display pharmacological study.

KEY FINDINGS

The pharmacokinetics studies demonstrated that LP-NCVs-PEG boosted LP bioavailability approximately 3.61 times compared to LP oral solution. Besides LP-NCVs-PEG may have an intriguing kidney-targeted nanoplatform for acute renal injury via decreased renal toxicity markers, renal expression of LEF-1, GSK3-β, caspase, TNF-α, NF-κB and TUNEL expression. Alternatively, increased renal tissue level of Bcl-2, wnt, β-catenin and TCF-4.

SIGNIFICANCE

LP-NCVs-PEG improved LP pharmacokinetics targeting the kidney and improved injury by activating wnt/β-catenin/TCF-4 pathway, blocking apoptosis, inflammation and renal toxicity markers suggesting it might be successful nephroprotective adjuvant therapy.

QbD Assisted Systematic Review for Optimizing the Selection of PVP as a Ternary Substance in Enhancing the Complexation Efficiency of Cyclodextrins: a Pilot Study

Inclusion complexes require higher concentration of Beta cyclodextrins (βCD) resulting in increased formulation bulk, toxicity, and production costs. This systematic review offers a comprehensive analysis using Quality by design (QbD) as a tool to predict potential applications of Polyvinylpyrrolidone (PVP) as a ternary substance to address issues of inclusion complexes. We reviewed 623 documents from 2013 to 2023 and Eighteen (18) research papers were selected for statistical and meta-analysis using the QbD concept to identify the most critical factors for selecting drugs and effect of PVP on inclusion complexes. The QbD analysis revealed that Molecular weight (MW), Partition coefficient (Log P), and the auxiliary substance ratio directly affected complexation efficiency (CE), thermodynamic stability in terms of Gibbs free energy (ΔG), and percent drug release. However, Stability constant (Ks) remained unaffected by any of these parameters. The results showed that low MW (250), median Log P (6), and a βCD: PVP ratio of 2:3 would result in higher CE, lower G, and improved drug release. PVP improves drug solubility, enhances delivery and therapeutic outcomes, and counteracts increased drug ionization due to decreased pH. In certain cases, its bulky nature and hydrogen bonding with CD molecules can form non-inclusion complexes. The findings of the study shows that there is potential molecular interaction between PVP and β-cyclodextrins, which possibly enhances the stability of inclusion complexes for drug with low MW and log P values less than 9. The systematic review shows a comprehensive methodology based on QbD offers a replicable template for future investigations into drug formulation research.

Dissolution enhancement of Gefitinib by solid dispersion and complexation with β-cyclodextrins: In vitro testing, cytotoxic activity, and tablet formulation

Cancer is the leading cause of mortality worldwide. In patients with metastatic non-small cell lung cancer, epidermal growth factor receptor (EGFR) is often overexpressed. Gefitinib (GEF), an inhibitor of EGFR, is approved for the treatment of patients with metastatic non-small cell lung cancer (NSCLC). However, the low solubility and dissolution of GEF limits its bioavailability. Numerous methods, including solid dispersion (SD) and complexation, have been reported to enhance the dissolution of poorly soluble drugs. In this study, GEF complexes were prepared using methyl-β-cyclodextrin (MβCD) and hydroxypropyl-β-cyclodextrin (HPβCD) in two molar ratios (1:1 and 1:2), furthermore, GEF SDs were prepared using polyvinylpyrrolidone (PVP), polyethylene glycol (PEG), and poloxamer-188(PXM) in three different ratios (1:2, 1:4 and 1:6 w/w). Dissolution studies were conducted on the prepared formulations. Dissolution results showed a 1.22-2.17-fold enhancement in drug dissolution after one hour compared to untreated GEF. Two formulations that showed higher dissolution enhancement were subsequently evaluated for in-vitro cytotoxicity and were formulated into tablets. The selected PVP-GEF (1:4 w/w) and MβCD-GEF (1:1M) formulas displayed improved cytotoxicity compared to untreated GEF. The IC50 values of the PVP-GEF and MβCD-GEF were 4.33 ± 0.66 and 4.84 ± 0.38 µM, respectively which are significantly lower (p < 0.05) than free GEF. In addition, the formulated tablets exhibited enhanced dissolution compared to pure GEF tablets. PVP-GEF SD tablets released (35.1 %±0.4) of GEF after one hour, while GEF-MβCD tablets released (42.2 % ± 0.7) after one hour. In the meantime, tablets containing pure GEF showed only 15 % ± 0.5 release at the same time. The findings of this study offer valuable insights for optimizing the dissolution and hence therapeutic capabilities of GEF while mitigating its limitations.

Microwave-Assisted Formation of Ternary Inclusion Complex of Pterostilbene

Pterostilbene (PTS) is a naturally occurring phytoalexin. PTS displays limited water solubility, which consequently results in its diminished oral bioavailability. Therefore, a ternary inclusion complex (TIC) of PTS with β-cyclodextrin (βCD) in the presence of ternary substance Pluronic® F-127 (PLF) was prepared using microwave technology. The PTS-TIC was characterized by dissolution performance. Further, the prepared TIC was characterized by DSC, FTIR, NMR, XRD, and SEM analysis. Additionally, the antioxidant activity of PTS and PTS-TIC was also evaluated. Phase-solubility studies revealed that PTS's solubility in water was increased by 6.72 times when βCD/PLF was present. In comparison with PTS, prepared PTS-TIC produced a considerable improvement in PTS release. After 1 h, 74.03 ± 4.47% of PTS was released from PTS-TIC. Outcomes of DSC, FTIR, NMR, XRD, and SEM analysis revealed that the PTS was enclosed in the βCD cavity. In terms of antioxidant properties, the PTS-TIC formulation demonstrated superior activity compared to PTS, possibly attributed to the improved solubility of PTS resulting from the formation of TIC using microwave technology. It was concluded that microwave technology proved to be an extremely beneficial means of interacting PTS with βCD. In addition to increasing the solubility of PTS, the findings are also expected to improve its bioavailability by increasing its solubility. As a result, this study could provide insight into potential methods for enhancing the solubility of polyphenolic substances like PTS.

Preparation, Characterization, and Evaluation of Physcion Nanoparticles for Enhanced Oral Bioavailability: An Attempt to Improve Its Antioxidant and Anticancer Potential

This study aims to enhance the dissolution rate of a poorly water-soluble drug physcion by producing its nanoparticles (NPs) using an antisolvent precipitation with a syringe pump (APSP) method and to assess its antioxidant and cytotoxic potential. The NPs were prepared using a simple and cost-effective APSP method and subsequently characterized by different analytical techniques including dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray powder diffractometry (XRD). They were also subjected to solubility and dissolution studies, and different parameters such as dissolution efficiency (DE), mean dissolution time (MDT), and difference (f1) and similarity factors (f2) were determined. Furthermore, physcion and its NPs were investigated for antioxidant and cytotoxic effects using various in vitro assays. SEM and DLS analysis indicated that the average size of physcion NPs was 110 and 195 ± 5.6 nm, respectively. The average ζ-potential and polydispersibility index (PDI) of the prepared NPs were -22.5 mV and 0.18, respectively, showing excellent dispersibility. XRD confirmed the amorphous nature of physcion NPs. The solubility and dissolution rates of NPs were significantly higher than those of the original powder. The antioxidant potential studied by the (DPPH), FRAP, and H2O2 assays was greater for physcion NPs than that for the raw powder. The IC50 values of physcion NPs against the aforementioned models were 57.56, 22.30, and 22.68 μg/mL, respectively. Likewise, the cytotoxic potential investigated through the MTT assay showed that physcion NPs were more cytotoxic to cancer cell lines A549 (IC50 4.12 μg/mL), HepG2 (IC50 2.84 μg/mL), and MDA-MB-231 (IC50 2.97 μg/mL), while it had less effect on HPAEpiC (IC50 8.68 μg/mL) and HRPTEpiC (IC50 10.71 μg/mL) normal human epithelial cells. These findings have proved that the APSP method successfully produced physcion NPs with enhanced solubility, dissolution rate, and antioxidant and cytotoxic activities.

Continuous Manufacturing of Solvent-Free Cyclodextrin Inclusion Complexes for Enhanced Drug Solubility via Hot-Melt Extrusion: A Quality by Design Approach

Conventional cyclodextrin complexation enhances the solubility of poorly soluble drugs but is solvent-intensive and environmentally unfavorable. This study evaluated solvent-free hot-melt extrusion (HME) for forming cyclodextrin inclusion complexes to improve the solubility and dissolution of ibuprofen (IBU). Molecular docking confirmed IBU's hosting in Hydroxypropyl-β-cyclodextrin (HPβ-CD), while phase solubility revealed its complex stoichiometry and stability. In addition, an 11 mm twin-screw co-rotating extruder with PVP VA-64 as an auxiliary substance aided the complex formation and extrusion. Using QbD and the Box-Behnken design, we studied variables (barrel temperature, screw speed, and polymer concentration) and their impact on solubility and dissolution. The high polymer concentration and high screw speeds positively affected the dependent variables. However, higher temperatures had a negative effect. The lowest barrel temperature set near the Tg of the polymer, when combined with high polymer concentrations, resulted in high torques in HME and halted the extrusion process. Therefore, the temperature and polymer concentration should be selected to provide sufficient melt viscosities to aid the complex formation and extrusion process. Studies such as DSC and XRD revealed the amorphous conversion of IBU, while the inclusion complex formation was demonstrated by ATR and NMR studies. The dissolution of ternary inclusion complexes (TIC) produced from HME was found to be ≥85% released within 30 min. This finding implied the high solubility of IBU, according to the US FDA 2018 guidance for highly soluble compounds containing immediate-release solid oral dosage forms. Overall, the studies revealed the effect of various process parameters on the formation of CD inclusion complexes via HME.

β-Cyclodextrin Nanosponges Inclusion Compounds Associated with Silver Nanoparticles to Increase the Antimicrobial Activity of Quercetin

This work aimed to synthesize and characterize a nanocarrier that consisted of a ternary system, namely β-cyclodextrin-based nanosponge (NS) inclusion compounds (ICs) associated with silver nanoparticles (AgNPs) to increase the antimicrobial activity of quercetin (QRC). The nanosystem was developed to overcome the therapeutical limitations of QRC. The host-guest interaction between NSs and QRC was confirmed by field emission scanning electron microscopy (FE-SEM), X-ray powder diffraction (XRPD), thermogravimetric analysis (TGA), and proton nuclear magnetic resonance (¹H-NMR). Moreover, the association of AgNPs with the NS-QRC was characterized using FE-SEM, energy-dispersive spectroscopy (EDS), transmission electron microscopy (TEM), dynamic light scattering (DLS), ζ-potential, and UV-Vis. Finally, the antimicrobial activity of the novel formulations was tested, which depicted that the complexation of QRC inside the supramolecular interstices of NSs increases the inhibitory effects against Escherichia coli ATCC25922, as compared to that observed in the free QRC. In addition, at the same concentrations used to generate an antibacterial effect, the NS-QRC system with AgNPs does not affect the metabolic activity of GES-1 cells. Therefore, these results suggest that the use of NSs associated with AgNPs resulted in an efficient strategy to improve the physicochemical features of QRC.

Enhanced Solubility and Biological Activity of Dexibuprofen-Loaded Silica-Based Ternary Solid Dispersions

The current study was designed to formulate ternary solid dispersions (TSDs) of dexibuprofen (Dex) by solvent evaporation to augment the solubility and dissolution profile, in turn providing gastric protection and effective anti-inflammatory activity. Initially, nine formulations (S1 to S9) of binary solid dispersions (BSDs) were developed. Formulation S1 comprising a 1:1 weight ratio of Dex and Syloid 244FP^® was chosen as the optimum BSD formulation due to its better solubility profile. Afterward, 20 TSD formulations were developed using the optimum BSD. The formulation containing Syloid 244FP^® with 40% Gelucire 48/16^® (S18) and Poloxamer 188^® (S23) successfully enhanced the solubility by 28.23 and 38.02 times, respectively, in pH 6.8, while dissolution was increased by 1.99- and 2.01-fold during the first 5 min as compared to pure drug. The in vivo gastroprotective study in rats suggested that the average gastric lesion index was in the order of pure Dex (8.33 ± 2.02) > S1 (7 ± 1.32) > S18 (2.17 ± 1.61) > S23 (1.83 ± 1.04) > control (0). The in vivo anti-inflammatory study in rats revealed that the percentage inhibition of swelling was in the order of S23 (71.47 ± 2.16) > S18 (64.8 ± 3.79) > S1 (54.14 ± 6.78) > pure drug (18.43 ± 2.21) > control (1.18 ± 0.64) after 6 h. ELISA results further confirmed the anti-inflammatory potential of the developed formulation, where low levels of IL-6 and TNF alpha were reported for animals treated with S23. Therefore, S23 could be considered an effective formulation that not only enhanced the solubility and bioavailability but also reduced the gastric irritation of Dex.

Formulation of Multicomponent Chrysin-Hydroxy Propyl β Cyclodextrin-Poloxamer Inclusion Complex Using Spray Dry Method: Physicochemical Characterization to Cell Viability Assessment

The work aimed to enhance chrysin (CHR) water solubility, dissolution, and in vitro antibacterial as well as cell viability. Chrysin binary, as well as ternary inclusion complex, were prepared using the spray drying method. The influence of an auxiliary component (poloxamer; PLX) was also assessed after being incorporated into the chrysin HP βCD complex (CHR-BC) and formed as a chrysin ternary complex (CHR-TC). The phase solubility investigation was carried out in order to assess the complexation efficiency and stability constant. The samples were assessed for the dissolution test, physicochemical evaluation, antibacterial activity, and cell viability tests were also assessed. The results of the phase solubility investigation showed that the stability constant for the binary system (268 M^-1) was lower than the ternary system (720 M^-1). The complex stability was validated by the greater stability constant value. The dissolution results showed that pure CHR had a limited release of 32.55 ± 1.7% in 60 min, while prepared CHR-TC and CHR-BC both demonstrated maximum CHR releases of 99.03 ± 2.34% and 71.95 ±2.1%, respectively. The dissolution study's findings revealed that the release of CHR was much improved over that of pure CHR. A study using a scanning electron microscope showed that CHR-TC contains more agglomerated and amorphous components. The higher conversion of crystalline CHR into an amorphous form is responsible for the structural alterations that are observed. After complexation, the distinctive peaks of pure CHR changed due to the complexation with HP βCD and PLX. The antimicrobial and cell viability results revealed improved antimicrobial activity as well as a lower IC50 value than pure CHR against the tested anticancer cell line (MCF7).