Performances of Polymer-Dispersed Liquid Crystal Films for Smart Glass Applications

Development of Diketopyrrolopyrrole-Based Dichroic Dyes for Improved Transmittance Control in Liquid Crystal Smart Windows

Two diketopyrrolopyrrole (DPP)-based dichroic dyes were synthesized and investigated for application in dye-doped liquid crystal (LC) smart windows. These dyes exhibited strong absorption in the long-wavelength region, particularly DPP-2, addressing the limited absorption of benzothiadiazole (BT)-based dyes beyond 650 nm. Both DPP dyes demonstrated high dichroic ratios and excellent alignment within the LC host, enabling effective transmittance modulation under an electric field. To enhance full visible spectral coverage, a multidye-doping strategy was implemented by combining DPP and BT dyes with complementary absorption properties, yielding an optimized mixture mix-10 with broad visible-light coverage and strong dimming capability. Finally, a smart window prototype incorporating mix-10 was assembled, which showed continuous and reversible transmittance modulation under varying voltages. The addition of a polarizer film further reduced off-state transmittance, making this approach particularly suitable for automotive applications requiring enhanced privacy. Moreover, the device could effectively modulate polarized light with high contrast, expanding its potential utility. This study presents an effective strategy for achieving full-spectrum tunable smart windows through complementary dichroic dye mixtures, providing insights for future research and practical applications.

Solution Casting Effect of PMMA-Based Polymer Electrolyte on the Performances of Solid-State Electrochromic Devices

Electrochromic devices (ECDs) are devices that change their optical properties in response to a low applied voltage. These devices typically consist of an electrochromic layer, a transparent conducting substrate, and an electrolyte. The advancement in solid-state ECDs has been driven by the need for improved durability, optical performance, and energy efficiency. In this study, we investigate varying the temperature to the casting solution for polymethylmethacrylate (PMMA)-based electrolytes for solid-state ECDs with a structure of glass/ITO/WO3/PMMA electrolyte/ITO/glass. The electrochromic layer, composed of WO3, was deposited using the sol-gel method, while the electrolyte, comprising lithium perchlorate (LiClO4) in propylene carbonate (PC) with PMMA, was prepared via solution casting. Various electrolyte samples were heated at different temperatures of 25, 40, 60, 80, and 100 °C to analyze the impact on the devices' performance. Our findings indicate that the devices with electrolytes at 25 °C exhibited superior anodic and cathodic diffusion. An increase in heating temperature corresponded with an increase in switching time. Notably, the sample heated at higher temperatures (60, 80, and 100 °C) demonstrated exceptional cycle stability. Nevertheless, samples with higher temperatures displayed a decrease in optical modulation. Additionally, the 100 °C sample exhibited the highest coloration efficiency compared to other samples at lower temperatures. This research highlights the potential of varying the temperature of solution casting on PMMA-based electrolytes in optimizing the performance of solid-state ECDs, particularly regarding coloration efficiency and durability.

A Comprehensive Review of Stimuli-Responsive Smart Polymer Materials-Recent Advances and Future Perspectives

Today, smart materials are commonly used in various fields of science and technology, such as medicine, electronics, soft robotics, the chemical industry, the automotive field, and many others. Smart polymeric materials hold good promise for the future due to their endless possibilities. This group of advanced materials can be sensitive to changes or the presence of various chemical, physical, and biological stimuli, e.g., light, temperature, pH, magnetic/electric field, pressure, microorganisms, bacteria, viruses, toxic substances, and many others. This review concerns the newest achievements in the area of smart polymeric materials. The recent advances in the designing of stimuli-responsive polymers are described in this paper.

New Series of Hydrogen-Bonded Liquid Crystal with High Birefringence and Conductivity

Liquid crystals with high dielectric anisotropy, low operational thresholds, and significant birefringence (Δn) represent a key focus in soft matter research. This work introduces a novel series of hydrogen-bonded liquid crystals (HBLCs) derived from 4-n-alkoxybenzoic, 4-alkoxy-3-fluorobenzoic derivatives (nOBAF), 4-alkoxy-2,3-fluorobenzoic derivatives (nOBAFF), and 2-fluoro-4-nitrobenzoic acid. The HBLCs were characterized using Fourier transform infrared spectroscopy, and their thermal behavior was evaluated via differential scanning calorimetry. Optical observations were conducted using polarized optical microscopy. The results indicate that mixtures containing benzoic acid with a bilateral fluorine substituent exhibit both SmA and SmC phases, while those with a unilateral fluorine substituent exhibit nematic and SmA phases. Moreover, an increase in the length of the alkoxy chain results in an expanded mesophase temperature range. This study demonstrates that the presence of a fluorine substituent and the incorporation of an NO2 group in the molecular structure result in an increase in dielectric permittivity, DC conductivity, dielectric anisotropy, and birefringence.

Preparation and Application of Polymer-Dispersed Liquid Crystal Film with Step-Driven Display Capability

The realization of multifunctional advanced displays with better electro-optical properties is especially crucial at present. However, conventional integral full drive-based transparent display is increasingly failing to meet the demands of the day. Herein, partitioned polymerization as a novel preparation method was introduced innovatively into polymer-dispersed liquid crystals (PDLC) for realizing a step-driven display in agreement with fluorescent dye to solve the above drawback. At first, the utilization of fluorescent dye to endow the PDLC film with fluorescent properties resulted in a reduction in the saturation voltage of the PDLC from 39.7 V to 25.5 V and an increase in the contrast ratio from 58.4 to 96.6. Meanwhile, the experimental observations and theoretical considerations have elucidated that variation in microscopic pore size can significantly influence the electro-optical behavior of PDLC. Then, the step-driven PDLC film was fabricated through the exposure of different regions of the LC cell to different UV-light intensities, resulting in stepwise voltage-transmittance (V-T) responses of the PDLC film for the corresponding regions. Consequently, under appropriate driving voltages, the PDLC can realize three different states of total scattering, semi-transparent and total transparent, respectively. In addition, the PDLC film also embodied an outstanding anti-aging property and UV-shielding performance, which makes it fascinating for multifunctional advanced display applications.

Thermal Degradation Studies of Poly(2-ethyl hexyl acrylate) in the Presence of Nematic Liquid Crystals

The thermal degradation behavior of Poly(2-ethyl hexyl hcrylate) (Poly(2-EHA)), blended with a commercially available nematic liquid crystal (LC) mixture, was investigated by thermal gravimetric analysis (TGA). Different heating rates, ranging from 5 to 200 °C/min, were applied under an inert atmosphere. Based on the TGA results, activation energies (Eα) at different conversion rates (α) were determined using three integral isoconversion methods: Flynn-Wall-Ozawa (FWO), Tang, and Kissinger-Akahira-Sunose (KAS). It can be noticed that the global evolution of these activation energies was the same for the three models. The coefficient of determination R2 presented values generally higher than 0.97. Using these models, the Eα value for the LC remains constant at 64 kJ/mol for all conversions rates. For the polymer Poly(2-EHA), applying the Tang and FWO models, the activation energy presents a variation ranging from 80 kJ/mol, for conversion α = 0.1, to 170 kJ/mol, for α = 0.9. For the third model (KAS), this energy varies between 80 and 220 kJ/mol in the same range of α.