The Role of Silver Nanoparticles in Electrochemical Sensors for Aquatic Environmental Analysis

Miniature lab-made electrochemical biosensor: A promising sensing kit for rapid detection of E. coli in water, urine and milk

A novel, rapid production methodology for laboratory-made carbon electrodes (LCE) employing cost-effective and readily available materials has developed in the present work. The LCE presents superior electrochemical characteristics compared to commercially available screen-printed carbon electrodes (SPCE). Furthermore, this research has demonstrated the performance of readily accessible, highly sensitive, and portable biosensors for on-site detection of E. coli in aqueous samples. Silver nanoparticles (AgNPs) were successfully electrodeposited onto the LCE (Ag-LCE) using the electrochemical method at optimised parameters. The E. coli-specific aptamer was conjugated with AgNPs, and uncoated Ag-LCE surfaces were blocked with a BSA (BSA-Apt-Ag-LCE). The developed BSA-Apt-Ag-LCE biosensor was characterised and validated for the successful detection of E. coli in aqueous samples using cyclic voltammetry (CV). A linear correlation was obtained for sensor response in the 3.4 × 101 to 3.4 × 106 CFU/ml bacterial concentration as ΔIpa = 5.71 log C + 2.91 with R2 = 0.987. BSA-Apt-Ag-LCE biosensors have a limit of detection of 34 CFU/ml and a response time of 15 min, indicating their prompt and practical on-site identification capabilities. The proficient detection of E. coli in diverse aqueous samples, substantiated by its consistent reproducibility as indicated by the relative standard deviation (RSD) value of a maximum of 1.71 %, is a compelling validation of the biosensor's efficacy and reliability. The proposed biosensor exhibited selectivity towards E. coli and was found stable even after being stored at 4 °C for four weeks.

Minimum-Run Resolution IV Design for Optimized Bio Removal of Fe2+ Using Enteromorpha intestinalis Aqueous Extract and Its Extract-Coated Silver Nanoparticles

Biosorbents have demonstrated considerable potential for the remediation of metals in aqueous environments. An aqueous extract of Enteromorpha intestinalis L. (EiE) and its extract-coated silver nanoparticles have been prepared and employed for the removal of iron. Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), UV-visible spectroscopy, transmission electron microscopy (TEM), gas chromatography-mass spectroscopy (GC-MS), and zeta potential were employed to characterize the prepared biosorbents. The adsorption properties of the biosorbents were investigated in batch experiments, with a range of factors taken into account, including pH, contact time, initial ion concentrations, biosorbent dosage, and temperature. A minimum-run resolution IV design (MRR-IV) was developed with the objective of optimizing the removal efficiency. The mechanisms of adsorption were investigated using both the Langmuir and Freundlich isotherms. Kinetic studies were conducted using the pseudo-first-order and pseudo-second-order models. A variety of active constituents, including organic acids, lipids, alcohols, and terpenes, were identified through the use of GC-MS, with the findings supported by FTIR spectra. Transmission electron microscopy (TEM) revealed that the nanoparticle size ranged from 5 to 44 nm, while X-ray diffraction (XRD) demonstrated a high degree of crystallinity. A screening study employing the MRR-IV methodology, facilitated by the Design-Experiment, Ver 13., indicates that three factors exert a considerable influence on the biosorption process. The study demonstrated that the biosorption mechanism is pH-dependent, with an optimal pH of 5. The adsorption performance was found to follow Freundlich isothermal models and pseudo-first-order kinetics.

Harnessing Radiation for Nanotechnology: A Comprehensive Review of Techniques, Innovations, and Application

Nanomaterial properties such as size, structure, and composition can be controlled by manipulating radiation, such as gamma rays, X-rays, and electron beams. This control allows scientists to create materials with desired properties that can be used in a wide range of applications, from electronics to medicine. This use of radiation for nanotechnology is revolutionizing the way we design and manufacture materials. Additionally, radiation-induced nanomaterials are more cost effective and energy efficient. This technology is also having a positive impact on the environment, as materials are being produced with fewer emissions, less energy, and less waste. This cutting-edge technology is opening up new possibilities and has become an attractive option for many industries, from medical advancements to energy storage. It is also helping to make the world a better place by reducing our carbon footprint and preserving natural resources. This review aims to meticulously point out the synthesis approach and highlights significant progress in generating radiation-induced nanomaterials with tunable and complex morphologies. This comprehensive review article is essential for researchers to design innovative materials for advancements in health care, electronics, energy storage, and environmental remediation.

Electrochemical measurement of morphine using a sensor fabricated from the CuS/g-C3N5/Ag nanocomposite

Morphine, as one of the most important narcotic drugs, significantly affects the nervous system and increases euphoria, which raises the likelihood of its misuse. Therefore, its measurement is of great importance. In this work, a new electrochemical sensor based on a nanocomposite of CuS/g-C3N5/AgNPs was developed for modifying Screen printed carbon electrodes (SPCEs) and used for the measurement of morphine through cyclic voltammetry and differential pulse voltammetry. Various analytical methods initially characterized the nanocomposite. The prepared sensor, which also has an extensive surface area, achieved a detection limit of 0.01 µM for morphine in a concentration range of 0.05-100 µM at pH 7. Besides its excellent capability in measuring morphine in real samples, the sensor exhibits good stability, reproducibility, and repeatability. The presence of CuS, due to its excellent high surface area alongside silver nanoparticles, leads to an increase in the conductivity of the g-C3N5 modified electrode, resulting in an increased oxidative current of morphine at the surface of the prepared sensor. Therefore, measuring low concentrations of morphine with this sensor was made possible. Additionally, measuring morphine without interference from various species is a strong point of the electrochemical sensor for morphine detection, and combined with the simplicity and ease of the method, it allows for morphine measurements to be conducted in the shortest possible time.

Nanotechnology in action: silver nanoparticles for improved eco-friendly remediation

Nanotechnology is an exciting area with great potential for use in biotechnology due to the far-reaching effects of nanoscale materials and their size-dependent characteristics. Silver and other metal nanoparticles have attracted a lot of attention lately because of the exceptional optical, electrical, and antimicrobial characteristics they possess. Silver nanoparticles (AgNPs) stand out due to their cost-effectiveness and abundant presence in the earth's crust, making them a compelling subject for further exploration. The vital efficacy of silver nanoparticles in addressing environmental concerns is emphasized in this thorough overview that dives into their significance in environmental remediation. Leveraging the distinctive properties of AgNPs, such as their antibacterial and catalytic characteristics, innovative solutions for efficient treatment of pollutants are being developed. The review critically examines the transformative potential of silver nanoparticles, exploring their various applications and promising achievements in enhancing environmental remediation techniques. As environmental defenders, this study advocates for intensified investigation and application of silver nanoparticles. Furthermore, this review aims to assist future investigators in developing more cost-effective and efficient innovations involving AgNPs carrying nanoprobes. These nanoprobes have the potential to detect numerous groups of contaminants simultaneously, with a low limit of detection (LOD) and reliable reproducibility. The goal is to utilize these innovations for environmental remediation purposes.

Green synthesis and anthelmintic activity of silver nanoparticles using Morus Alba Fruit extract against different stages of equine strongyles

The current study was designed to green synthesize silver nanoparticles (GRAgNPs) using Morus alba fruit extract and evaluate their nematicidal effects against strongyle nematodes compared to commercial silver nanoparticles (CAgNPs) in vitro. The nanoparticles were characterized by Ultraviolet-visual absorption spectrography, transmission electron microscopy, and X-ray diffraction. Next, uptake of AgNPs by the first stage larvae (L1), egg hatch inhibition (EHI) and the motility of infectious larvae (L3s), and the ultrastructural analysis of the eggs and worms were conducted. Moreover, some of oxidative/nitrosative stress indicators, including total antioxidant status content (TAC), protein carbonylation (PCO), lipid peroxidation (MDA), and DNA damage were assessed in the homogenized samples of strongyle L3s. We found that the GRAgNPs had spherical shape, 20-30 nm in diameter with rough surface. Following incubation with GRAgNPs at concentrations of 43.40, 21.70 and 10.85 ppm and CAgNPs at concentrations of 43.40 and 21.70, EHI was more than 90%. In addition, concentrations of 43.40 and 21.70 ppm of GRAgNPs led to inhibition of larval motility by more than 90%. The LC50 at 24 h of treatment for GRAgNPs and CAgNPs was determined to be 8.62 and 10.34 ppm, respectively. GRAgNPs and CAgNPs, in a concentration-dependent manner, resulted in the induction of oxidative/nitrosative stress evidenced by decreased TAC levels, and increased levels of MDA and PCO, together with increased DNA damage. The uptake of AgNPs by the L1 larvae revealed that FITC labeled GRAgNPs fluoresced with high intensity largely in the intestinal area. Scanning Electron Microscopy analysis of eggs and larvae revealed that GRAgNPs penetrated the cuticle of larvae, changed the tegmentum, and ultimately killed the worm. In conclusion, GRAgNPs had more robust anthelminthic effects than the standard antiparasitic and CAgNPs. They could be considered as a promising antiparasitic agent.

Recent advances towards point-of-care devices for fungal detection: Emphasizing the role of plasmonic nanomaterials in current and future technologies

Fungal infections are a significant global health problem, particularly affecting individuals with weakened immune systems. Moreover, as uncontrolled antibiotic and immunosuppressant use increases continuously, fungal infections have seen a dramatic increase, with some strains developing antibiotic resistance. Traditional approaches to identifying fungal strains often rely on morphological characteristics, thus owning limitations, such as struggles in identifying several strains or distinguishing between fungal strains with similar morphologies. This review explores the multifaceted impact of fungi infections on individuals, healthcare providers, and society, highlighting the often-underestimated economic burden and healthcare implications of these infections. In light of the serious constraints of traditional fungal identification methods, this review discusses the potential of plasmonic nanoparticle-based biosensors for fungal infection identification. These biosensors can enable rapid and precise fungal pathogen detection by exploiting several readout approaches, including various spectroscopic techniques, colorimetric and electrochemical assays, as well as lateral-flow immunoassay methods. Moreover, we report the remarkable impact of plasmonic Lab on a Chip technology and microfluidic devices, as they recently emerged as a class of advanced biosensors. Finally, we provide an overview of smartphone-based Point-of-Care devices and the associated technologies developed for detecting and identifying fungal pathogens.

Medical Applications of Silver and Gold Nanoparticles and Core-Shell Nanostructures Based on Silver or Gold Core: Recent Progress and Innovations

Nanoparticles (NPs) of noble metals such as silver (Ag NPs) or gold (Au NPs) draw the attention of scientists looking for new compounds to use in medical applications. Scientists have used metal NPs because of their easy preparation, biocompatibility, ability to influence the shape and size or modification, and surface functionalization. However, to fully use their capabilities, both the benefits and their potential threats should be considered. One possibility to reduce the potential threat and thus prevent the extinction of their properties resulting from the agglomeration, they are covered with a neutral material, thus obtaining core-shell nanostructures that can be further modified and functionalized depending on the subsequent application. In this review, we focus on discussing the properties and applications of Ag NPs and Au NPs in the medical field such as the treatment of various diseases, drug carriers, diagnostics, and many others. In addition, the following review also discusses the use and potential applications of Ag@SiO2 and Au@SiO2 core-shell nanostructures, which can be used in cancer therapy and diagnosis, treatment of infections, or tissue engineering.

Underground Ink: Printed Electronics Enabling Electrochemical Sensing in Soil

Improving agricultural production relies on the decisions and actions of farmers and land managers, highlighting the importance of efficient soil monitoring techniques for better resource management and reduced environmental impacts. Despite considerable advancements in soil sensors, their traditional bulky counterparts cause difficulty in widespread adoption and large-scale deployment. Printed electronics emerge as a promising technology, offering flexibility in device design, cost-effectiveness for mass production, and a compact footprint suitable for versatile deployment platforms. This review overviews how printed sensors are used in monitoring soil parameters through electrochemical sensing mechanisms, enabling direct measurement of nutrients, moisture content, pH value, and others. Notably, printed sensors address scalability and cost concerns in fabrication, making them suitable for deployment across large crop fields. Additionally, seamlessly integrating printed sensors with printed antenna units or traditional integrated circuits can facilitate comprehensive functionality for real-time data collection and communication. This real-time information empowers informed decision-making, optimizes resource management, and enhances crop yield. This review aims to provide a comprehensive overview of recent work related to printed electrochemical soil sensors, ultimately providing insight into future research directions that can enable widespread adoption of precision agriculture technologies.

A review on the chemical and biological sensing applications of silver/carbon dots nanocomposites with their interaction mechanisms

The development of new nanocomposites has a significant impact on modern instrumentation and analytical methods for chemical analysis. Due to their unique properties, carbon dots (CDs) and silver nanoparticles (AgNPs), distinguished by their unique physical, electrochemical, and optical properties, have captivated significant attention. Thus, combining AgNPs and CDs may produce Ag/CDs nanocomposites with improved performances than the individual material. This comprehensive review offers an in-depth exploration of the synthesis, formation mechanism, properties, and the recent surge in chemical and biological sensing applications of Ag/CDs with their sensing mechanisms. Detailed insights into synthesis methods to produce Ag/CDs are unveiled, followed by information on their physicochemical and optical properties. The crux of this review lies in its spotlight on the diverse landscape of chemical and biological sensing applications of Ag/CDs, with a particular focus on fluorescence, electrochemical, colorimetric, surface-enhanced Raman spectroscopy, and surface plasmon resonance sensing techniques. The elucidation of sensing mechanisms of the nanocomposites with various target analytes adds depth to the discussion. Finally, this review culminates with a concise summary and a glimpse into future perspectives of Ag/CDs aiming to achieve highly efficient and enduring Ag/CDs for various applications.

Electrochemical sensor based on gum Arabic nanoparticles for rapid and in-situ detection of different heavy metals in real samples

The key solution to combat trace metal pollution and keep the environment, ecosystem, animals, and humans safe is earlier and rapid trace metal detection. For all these reasons, we propose in this work the design of a simple electrochemical sensor functionalized with green nanoparticles for electrochemical detection of the fourth most dangerous heavy metal ions namely copper, zinc, lead, and mercury. The green nanoparticles are fabricated by a one-step, consisting of reducing platinum nanoparticles by a natural gum Arabic polymer. To guarantee the success of these nanoparticles' design, the nanoparticles have been characterized by Fourier-transform infrared spectroscopy FTIR, and thermogravimetric TGA techniques. While, for the electrochemical characterization, we have adopted cyclic voltammetry CV and electrochemical impedance spectroscopy EIS to control different steps of surface modification, and the differential pulse anodic stripping DPAS was monitored to follow up the electrochemical detection of different heavy metals.

Results

have confirmed the good chemical and physical properties of the elaborated nanoparticles. As, the developed sensor showed a specific electrochemical response toward the heavy metal ions separately, with a lower limit of detection lower LOD than that recommended by the World Health Organization, in order of 9.6 ppb for Cu2+, 1.9 ppb for Zn2+, 0.9 ppb for Hg2+, and 4.2 ppb for Pb2+. Impressively, the elaborated sensor has demonstrated also high stability, outstanding sensitivity, and excellent analytical performance.In addition, the elaborated analytical tool has been successfully applied to the determination of various heavy metal ions in real samples, reflecting then its promising prospect in practical application.

Synthesized uniform-different sizes silver nanoparticles using TSC and SBH simultaneously for antibacterial application

Silver nanoparticles (AgNPs) in the form of nanospheres from a few nm to 100 nm in diameter were synthesized in a controlled manner using a combination of two reducing agents: sodium borohydride (SBH) and trisodium citrate (TSC). The influence of the size of AgNPs on antibacterial activity was investigated with different concentrations of AgNPs on two types of bacteria:Pseudomonas aeruginosa(PA) andStaphylococcus aureusresistant (SA) while the positive control wasAmpicillin (Amp)50μg/ml and the negative control was water. AgNPs were investigated for morphology, size and size distribution using transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements. The optical properties of the AgNPs were investigated by recording their UV-vis absorption spectra. The antimicrobial activity of AgNPs was determined using the disc diffusion method. The results showed that the antibacterial ability of AgNPs depends on both concentration and particle size. With a particle concentration of 50μg ml-1, the antibacterial ability is the best. The smaller the particle size, the higher the antibacterial ability. The simultaneous use of two reducing agents TSC and SBH is the novelty of the article to synthesize AgNPs particles that are uniform in shape and size while controlling the particle size. On that basis, their antibacterial performance is increased.