The Optimization of a Dimenhydrinate Transdermal Patch Formulation Based on the Quantitative Analysis of In Vitro Release Data by DDSolver through Skin Penetration Studies

Development, in vitro and ex vivo characterization of lamotrigine-loaded bovine serum albumin nanoparticles using QbD approach

The present study aimed to prepare and optimize lamotrigine-loaded bovine serum albumin nanoparticles (LAM-NP) using the Quality by Design (QbD) approach and to investigate both the in vitro and ex vivo effects of different cross-linking agents glutaraldehyde (GLUT), glucose (GLUC) and 1-(3-dimethylaminutesopropyl)-3-ethylcarbodiimide hydrochloride (EDC) on intranasal applicability. Cross-linked LAM-NP from EDC (NP-EDC-1) showed the lowest Z-average value (163.7 ± 1.9 nm) and drug encapsulation efficacy (EE%) of 97.31 ± 0.17%. The drug release of GLUC cross-linked LAM-NP (NP-GLUC-9), glutaraldehyde cross-linked LAM-NP (NP-GLUT-2), and NP-EDC-1 at blood circulation conditions was higher than the initial LAM. The results of the blood-brain barrier parallel artificial membrane permeability assay (BBB-PAMPA) showed an increase in the permeability of LAM through the BBB with NP-GLUC-9 and an increase in flux with all selected formulations. The ex vivo study showed that LAM diffusion from the selected formulations through the human nasal mucosa was higher than in case of initial LAM. The cytotoxicity study indicated that BSA-NP reduced LAM toxicity, and GLUC 9 mM and EDC 1 mg could be alternative cross-linking agents to avoid GLUT 2% v/v toxicity. Furthermore, permeability through Caco-2 cells showed that nasal epithelial transport/absorption of LAM was improved by using BSA-NPs. The use of BSA-NP may be a promising approach to enhance the solubility, permeability through BBB and decrease the frequency of dosing and adverse effects of LAM.

Development and Characterization of In Situ Gelling Nasal Cilostazol Spanlastics

Cilostazol (CIL), a BCS class II antiplatelet aggregation and vasodilator agent, is used for cerebrovascular diseases to minimize blood-brain barrier dysfunction, white matter-lesion formation, and motor deficits. The current work aimed to develop and optimize cilostazol-loaded spanlastics (CIL-SPA) for nose-to-brain delivery to overcome the low solubility and absorption, the first pass-metabolism, and the adverse effects. The optimal CIL-SPA formulation was loaded into Phytagel® (SPA-PG), Poloxamer-407 (SPA-P407), and chitosan (SPA-CS) gel bases and characterized in terms of colloidal properties, encapsulation efficiency (EE%), mucoadhesive properties, and biopharmaceutical aspects. The developed in situ gelling formulations showed a <300 nm average hydrodynamic diameter, <0.5 polydispersity index, and >|±30| mV zeta potential with a high EE% (>99%). All formulations met the droplet size-distribution criteria of nasal requirements (<200 µm), and all formulations showed adequate mucoadhesion properties. Both the BBB-PAMPA and horizontal permeability study through an artificial membrane revealed that all formulations had higher CIL flux and cumulative permeability at in vitro nose-to-brain conditions compared to the initial CIL. The in vitro drug-release study showed that all formulations released ca. 100% of CIL after 2 h. Therefore, the developed formulations could be promising for improving the low bioavailability of CIL through nose-to-brain delivery.

Advancing Pharmaceutical Science with Artificial Neural Networks: A Review on Optimizing Drug Delivery Systems Formulation

Drug Delivery Systems (DDS) have been developed to address the challenges associated with traditional drug delivery methods. These DDS aim to improve drug administration, enhance patient compliance, reduce side effects, and optimize target therapy. To achieve these goals, it is crucial to design DDS with optimal performance characteristics. The final properties of a DDS are determined by several factors that go into formulating a pharmaceutical preparation. Thus, optimizing these factors can lead to the ideal DDS formulation. Artificial Neural Networks (ANN) are computational models that mimic the function of biological neurons and neural networks and perform mathematical operations on inputs to generate outputs. ANN is widely used in medical sciences for modeling disease diagnosis and treatment, dose adjustment in combination therapy, medical education, and other fields. In the pharmaceutical sciences, ANN has gained significant attention for designing and optimizing pharmaceutical formulations. This article reviews the use of ANN in the design and optimization of pharmaceutical formulations, specifically DDS. Since DDS is highly diverse, different factors are examined for each type of DDS. These factors are considered independent and dependent parameters for each ANN model, and various examples are provided. By utilizing ANN, it is possible to establish the relationship between the formulation factors and the resulting DDS characteristics, ultimately leading to the development of optimized DDS.

Incorporation of Inclusion Complexes in the Dissolvable Microneedle Ocular Patch System for the Efficiency of Fluconazole in the Therapy of Fungal Keratitis

Fluconazole (FNL) is one of the first-line treatments for fungal keratitis as it is an effective broad-spectrum antimicrobial commonly administered orally or topically. However, FNL has a very low water solubility, limiting its drug formulation, therapeutic application, and bioavailability through tissues. To overcome these limitations, this study aimed to develop FNL inclusion complexes (FNL-IC) with cyclodextrin (α-cyclodextrin, sulfobutylether-β-cyclodextrin, and hydroxypropyl-γ cyclodextrin) and incorporate it into a dissolvable microneedle (DMN) system to improve solubility and drug penetration. FNL-IC was evaluated for saturation solubility, Fourier transform infrared spectroscopy, differential scanning calorimetry, in vitro release, minimum inhibitory concentration, minimum fungicidal concentration, and time-killing assay. DMN-FNL-IC was evaluated for mechanical and insertion properties, surface pH, moisture absorption ability, water vapor transmission, and drug content recovery. Moreover, ocular kinetic, ex vivo antimicrobial, in vivo antifungal, and chorioallantoic membrane (HET-CAM) assays were conducted to assess the overall performance of the formulation. Mechanical strength and insertion properties revealed that DMN-FNL-IC has great mechanical and insertion properties. The in vitro release of FNL-IC was significantly improved, exhibiting a 9-fold increase compared to pure FNL. The ex vivo antifungal activity showed significant inhibition of Candida albicans from 6.54 to 0.73 log cfu/mL or 100-0.94%. In vivo numbers of colonies of 0.87 ± 0.13 log cfu/mL (F2), 4.76 ± 0.26 log cfu/mL (FNL eye drops), 3.89 ± 0.24 log cfu/mL (FNL ointments), and 8.04 ± 0.58 log cfu/mL (control) showed the effectiveness of DMN preparations against other standard commercial preparations. The HET-CAM assay showed that DMN-FNL-IC (F2) did not show any vascular damage. Finally, a combination of FNL-IC and DMN was developed appropriately for ocular delivery of FNL, which was safe and increased the effectiveness of treatments for fungal keratitis.

Design of floating formulations and antiulcer activity of Desmostachya bipinnata

The study aims to design and optimize the floating formulations of the aqueous extract of Desmostachya bipinnata (ADB) to treat peptic ulcers. The trial concentrations of HPMC E50, HPMC K4M, and Carbopol 940 were used as factors, and floating lag time, total floating time, and % drug release at 12 h were used as responses. The formulation underwent evaluation for different parameters: aspirin-induced ulcers in rats assessed the antiulcer activity, and X-ray studies in rabbits evaluated the gastroretentive nature. The optimized formulation has shown a floating lag time of 32 s and floated in the gastric medium for more than 9 h with a maximum drug release of 93% at the end of 12 h by following the Korsmeyer-Peppas drug release mechanism. The optimized formulation has good flow properties. The FT-IR, DSC, and XRD studies show ADB and excipients didn't show any incompatibility. The formulation has shown significant antiulcer activity against aspirin-induced ulcers in rats, with an ulcer index of 3.38 ± 0.24 and inhibition of 76.67 ± 0.56%. The in vivo X-ray imaging proved the gastric retention of the formulations for more than 8 h. The results of the formulations demonstrate the floating ability and sustained drug release of the tablet responsible for treating peptic ulcers to show a localized effect in the gastric region and to maintain the ROS levels.

3D printing of dolutegravir-loaded polylactide filaments as a long-acting implantable system for HIV treatment

3D printing was used to prepare implantable systems or tablets loaded with dolutegravir to explore their potential as long-acting implantables (LAIs). Our strategy relies on preparing a polylactide (PLA) filament loaded with the anti-HIV drug. Subsequently, 3D printing was performed under conditions that allowed the PLA to be simultaneously melted and the drug encapsulated within the printed strand. The dolutegravir release profiles indicated its sustained release for 47 days. Furthermore, neat and drug-loaded tablets were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA), while their morphology was assessed by scanning electron microscopy (SEM). Finally, their biocompatibility was proved by MTT assay against ISO standards recommended L929 mouse and human Hs68 skin fibroblast cells. All the results indicated that the 3D printing of PLA-based tablets could produce customized medications with potential applications against HIV.

Hydroxypropyl Methylcellulose Bioadhesive Hydrogels for Topical Application and Sustained Drug Release: The Effect of Polyvinylpyrrolidone on the Physicomechanical Properties of Hydrogel

Hydrogels are homogeneous three-dimensional polymeric networks capable of holding large amounts of water and are widely used in topical formulations. Herein, the physicomechanical, rheological, bioadhesive, and drug-release properties of hydrogels containing hydroxypropyl methylcellulose (HPMC) and polyvinylpyrrolidone (PVP) were examined, and the intermolecular interactions between the polymers were explored. A three-level factorial design was used to form HPMC-PVP binary hydrogels. The physicomechanical properties of the binary hydrogels alongside the homopolymeric HPMC hydrogels were characterized using a texture analyzer. Rheological properties of the gels were studied using a cone and plate rheometer. The bioadhesiveness of selected binary hydrogels was tested on porcine skin. Hydrophilic benzophenone-4 was loaded into both homopolymeric and binary gels, and drug-release profiles were investigated over 24 h at 33 °C. Fourier transform infrared spectroscopy (FTIR) was used to understand the inter-molecular drug-gel interactions. Factorial design analysis supported the dominant role of the HPMC in determining the gel properties, rather than the PVP, with the effect of both polymer concentrations being non-linear. The addition of PVP to the HPMC gels improved adhesiveness without significantly affecting other properties such as hardness, shear-thinning feature, and viscosity, thereby improving bioadhesiveness for sustained skin retention without negatively impacting cosmetic acceptability or ease of use. The release of benzophenone-4 in the HPMC hydrogels followed zero-order kinetics, with benzophenone-4 release being significantly retarded by the presence of PVP, likely due to intermolecular interactions between the drug and the PVP polymer, as confirmed by the FTIR. The HPMC-PVP binary hydrogels demonstrate strong bioadhesiveness resulting from the addition of PVP with desirable shear-thinning properties that allow the formulation to have extended skin-retention times. The developed HPMC-PVP binary hydrogel is a promising sustained-release platform for topical drug delivery.

DDSolver Software Application for Quantitative Analysis of In Vitro Drug Release Behavior of the Gastroretentive Floating Tablets Combined with Radiological Study in Rabbits

Background:

Gastroretentive drug delivery systems (GRDDSs) are designed to release the drug in the stomach over a prolonged time; thus, they can reduce drug dosing frequency and dose size and improve patient compliance. GRDDSs are also highly effective in enhancing the bioavailability of the drug that exhibits window absorption in specific segments of the gastrointestinal (GI) tract. Famotidine (FMT), an H2 receptor antagonist, is an example of these drugs. FMT is a slightly water-soluble drug but well soluble in an acidic medium. This research aims to formulate FMT gastro-retentive floating tablets (FMT-GRFTs) to improve the bioavailability and therapeutic activity of the drug and increase patients' adherence to treatment. In addition, the in vitro release behavior of the prepared FMT-GRFTs was quantitatively analyzed using the DDSolver software to assist in selecting the successful formulation that was then evaluated in vivo.

Methods:

The direct compression technique prepared numerous tablet formulations and was subjected to the pre-and post-compression evaluation. Data of FMT dissolution in the simulated gastric medium was analyzed by various kinetic models built in the DDSolver program. In addition, the simulated pharmacokinetics (AUC, MDT, and MRT), R2 adjusted, AIC, MSC, correlation of the residuals, and similarity factor (f2) were also generated.

Results:

The results revealed that FMT release from the candidate formula (FH3) fitted to the first-order kinetic model, with a high value of R2 adjusted and MSC and a low AIC. The release behavior exhibited the Fickian diffusion mechanism. The similarity factor showed no significant difference (p < 0.05) of the test sample compared to the reference product. Nevertheless, the simulated pharmacokinetic parameter, AUC, proved a two-fold enhancement in FMT bioavailability, with a significant increment in the MDT and MRT compared with the reference product. The FT-IR spectroscopy analysis indicated the absence of drug-excipients/polymer interaction. The in vivo X-ray studies on rabbits confirmed that the floating tablets showed nearly eight hours of gastric residence.

Conclusion:

DDSolver software was helpful in deciding the optimized formulation of FMT floating tablets. The radiological examination in rabbits for gastric retention was consistent with the release data analysis in vitro.

Intranasal delivery of Clozapine using nanoemulsion-based in-situ gels: An approach for bioavailability enhancement

Limited solubility and hepatic first-pass metabolism are the main causes of low bioavailability of anti-schizophrenic drug, Clozapine (CZP). The objective of the study was to develop and validate nanoemulsion (NE) based in-situ gel of CZP for intranasal administration as an approach for bioavailability enhancement. Solubility of CZP was initially investigated in different oils, surfactants and co-surfactants, then pseudoternary phase diagrams were constructed to select the optimized ratio of oil, surfactant and co-surfactant. Clear and transparent NE formulations were characterized in terms of droplet size, viscosity, solubilization capacity, transmission electron microscopy, in-vitro drug release and compatibility studies. Selected NEs were incorporated into different in-situ gel bases using combination of two thermosensitive polymers; Pluronic® F-127 (PF127) and F-68 (PF68). NE-based gels (NG) were investigated for gelation temperature, viscosity, gel strength, spreadability and stability. Moreover, selected NGs were evaluated for ex-vivo permeation, mucoadhesive strength and nasal ciliotoxicity. Peppermint oil, tween 80 and transcutol P were chosen for NE preparation owing to their maximum CZP solubilization. Clear NE points extrapolated from tween 80:transcutol P (1:1) phase diagram and passed dispersibility and stability tests, demonstrated globule size of 67.99 to 354.96 nm and zeta potential of −12.4 to −3.11 mV with enhanced in-vitro CZP release (>90% in some formulations). After incorporation of the selected N3 and N9 formulations of oil:Smix of 1:7 and 2:7, respectively to a mixture of PF127 and PF68 (20:2% w/w), the resultant NG formulations exhibited optimum gelation temperature and viscosity with enhanced CZP permeation and retention through sheep nasal mucosa. Ciliotoxicity examinations of the optimum NGs displayed no inflammation or damage of the lining epithelium and the underlying cells of the nasal mucosa. In conclusion, NE-based gels may be a promising dosage form of CZP for schizophrenia treatment.

Optimizing and Evaluating the Transdermal Permeation of Hydrocortisone Transfersomes Formulation Based on Digital Analysis of the In Vitro Drug Release and Ex Vivo Studies

BACKGROUND

Transfersomes can be used to enhance transdermal drug delivery due to their flexibility and ability to incorporate various molecules. For example, hydrocortisone (HC), a corticosteroid, is taken by different routes and serves as immunosuppressive, anticancer, and antiallergenic; however, it is poorly absorbed by the skin.

OBJECTIVE

Therefore, the current study suggested HC-loaded transfersomes as an alternative route of administration for reaching deeper skin layers or systemic circulation, to reduce the side effects of HC and improve its bioavailability.

METHODS

HC transfersomes were prepared by the thin-film hydration method and characterized for their vesicular size, zeta potential, drug entrapment efficiency, elasticity, FTIR spectroscopy, in vitro drug release, ex vivo permeation, and irritancy in rabbits. The optimized formulation, F15 (containing HC 20 mg, egg phosphatidylcholine (EPC) 400 mg, and 75 mg of Span 80), was chosen because it showed the highest (p< 0.05) EE% (60.4±0.80) and optimized sustained in vitro drug release (Q8 = 87.9±0.6%).

RESULTS

Extensive analysis of the drug release data from all formulas was performed using the DDSolver software which quantitatively confirmed the successful formulation. The Weibull equation was the best model to fit the release data compared to others, and the release mechanism was Fickian diffusion.

CONCLUSION

The simulated pharmacokinetic parameters showed that F15 had the highest AUC, MDT, and DE. Furthermore, F15 significantly enhanced HC permeation by 12-folds compared to the control through the excised rat's skin. The skin irritancy test has proven F15 safety and skin compatibility.