Critical Assessment of Clean-Up Techniques Employed in Simultaneous Analysis of Persistent Organic Pollutants and Polycyclic Aromatic Hydrocarbons in Fatty Samples

A High Efficiency Method for the Extraction and Quantitative Analysis of 45 PFAS in Whole Fish

This study describes and validates a new method for extracting perfluoroalkyl and polyfluoroalkyl substances (PFAS) from whole-body fish tissue, demonstrates that freeze-dry preservation of tissue conserves bioaccumulative PFAS, and details a method demonstration on Lake Michigan fish. While fish filets are more commonly analyzed for their significance to human health, whole fish are useful to determine ecological impacts, but published methods such as EPA 1633 do not produce reliable results for this more challenging matrix. Here we show that lipid removal technology produces clean extracts without the need for solid-phase extraction or evaporative concentration, which often lead to loss of some PFAS. This method achieves an accuracy of 96 ± 9% for the detection of 45 PFAS while also offering benefits of a simple procedure, reduced processing time, and decreased waste generation compared to multistep cleanup and concentration methods. A test of freeze-drying demonstrated that compounds detected in Great Lakes fish were retained, but volatile compounds including sulfonamide precursors and ethanols were lost. To demonstrate field performance, the entire method was applied to whole-fish composites from Lake Michigan. Results from these samples reveal that the PFAS concentration was driven by collection location, while the distribution of PFAS was dictated by fish species.

Development of QuEChERS based on the Z-Sep+and DLLME method for analysis of PBDEs in chicken eggs by GC-MS/MS

A sensitive, straightforward, and environmentally sustainable method was developed and validated for the quantification of 13 PBDEs in chicken eggs using gas chromatography coupled with triple quadrupole mass spectrometry (GC-MS/MS). The QuEChERS approach, combined with dispersive liquid-liquid microextraction (DLLME), was applied for sample preparation. Egg samples were extracted with acetonitrile and purified using Z-Sep + adsorbent. Tetrachloroethane was selected as the extraction solvent for the DLLME step. All PBDEs exhibited strong linearity, with R > 0.999 within the range of 0.20-10.0 ng/mL, and the limits of quantification (LOQ) were determined to be 10.0 pg/g. Apparent recoveries of PBDEs ranged from 85.2 % to 105.7 %. A total of 119 chicken eggs were analyzed using the developed method. BDE-47 and BDE-99 showed relatively high detection rates of 38.6 % and 24.4 %, respectively. The hazard quotient (HQ) values for BDE-47, BDE-99, and BDE-153 congeners remained well below 1.0, indicating no significant health risk from egg consumption.

Simultaneous effervescence-assisted microextraction and magnetic adsorbent generation for rapid and cost-effective organochlorine pesticides analysis

This study introduced an innovative magnetic effervescence-assisted microextraction method, streamlining the preparation of effervescent tablets through a one-pot method that blends a CO2 donor (Na2CO3) and an H+ donor (NaH2PO4) with bare magnetic particles (Fe3O4) and an adsorbent (hydroxylated multi-walled carbon nanotubes), followed by pressing. During the extraction process, the bare magnetic particles and adsorbent undergo in-situ self-assembly to create a magnetic adsorbent. The effervescence generates bubbles that enhance effective extraction and magnetism facilitates the easy separation of the magnetic adsorbent from the sample solution, completing the process within 4 min. Applied to organochlorine pesticide analysis in fruit juices and herbal extracts, the method exhibits excellent linearity (R2 > 0.993), sensitivity (detection limits: 0.010-0.125 ng/mL), accuracy (recoveries: 85.8-99.9%), and precision (RSDs < 9.7%) with GC-ECD. Overall, this approach stands out for its simplicity, cost-effectiveness, and suitability for on-site analysis, owing to its operational ease and independence from specialized equipment.

Bioaccumulation of Organic and Inorganic Pollutants in Fish from Thermaikos Gulf: Preliminary Human Health Risk Assessment Assisted by a Computational Approach

The monitoring of contaminants in fish species is pivotal for fishes' health and reproduction, as well as for human health. In the specific work, three major categories of contaminants, pesticides, pharmaceuticals, and macro and trace elements, were investigated in two major fish species, Dicentrarchus labrax and Solea solea, collected from Thermaikos Gulf, in Greece. To achieve this goal, three analytical methods using LC-MS/MS, GC-MS/MS, and ICP-MS were developed, validated, and applied to the collected fish samples. The results indicated a very low prevalence of caffeine and acetaminophen, both not exceeding 3.8 μg/kg fish. Similarly, thiabendazole, cypermethrin, and tricyclazole (pesticides) were found in a concentration range of 0.9 to 13.7 μg/kg fish, while in one D. labrax sample, traces of the metabolite of organochlorine pesticide DDT, o,p'-DDE were detected. Al, Mn, Fe, Zn, and Sr were the predominant trace elements in a concentration range of 500-20,000 μg/kg fish. Macro elements levels varied from 280 to 5405 mg/kg fish. Health risk assessment did not unveil an unacceptable risk for the human health of adults, apart from one sample presenting Hg above the regulatory levels. On the contrary, for children, the calculated hazard quotient values for Hg in all cases and for two As detections were higher than the threshold value of 1, indicating a potential risk.

Review of scientific literature on available methods of assessing organochlorine pesticides in the environment

Organochlorine pesticides (OCPs) are persistent organic pollutants (POPs) widely used in agriculture and industry, causing serious health and ecological consequences upon exposure. This review offers a thorough overview of OCPs analysis emphasizing the necessity of ongoing work to enhance the identification and monitoring of these POPs in environmental and human samples. The benefits and drawbacks of the various OCPs analysis techniques including gas chromatography-mass spectrometry (GC-MS), gas chromatography-electron capture detector (GC-ECD), and liquid chromatography-mass spectrometry (LC-MS) are discussed. Challenges associated with validation and optimization criteria, including accuracy, precision, limit of detection (LOD), and limit of quantitation (LOQ), must be met for a method to be regarded as accurate and reliable. Suitable quality control measures, such as method blanks and procedural blanks, are emphasized. The LOD and LOQ are critical quality control measure for efficient quantification of these compounds, and researchers have explored various techniques for their calculation. Matrix interference, solubility, volatility, and partition coefficient influence OCPs occurrences and are discussed in this review. Validation experiments, as stated by European Commission in document SANTE/11813/2017, showed that the acceptance criteria for method validation of OCP analytes include ≤20 % for high precision, and 70-120 % for recovery. This may ultimately be vital for determining the human health risk effects of exposure to OCP and for formulating sensible environmental and public health regulations.

Optimization of a simple, effective, and greener methodology for polycyclic aromatic hydrocarbon extraction from human adipose tissue

Polycyclic aromatic hydrocarbons (PAHs) are environmentally persistent organic pollutants formed during incomplete combustion and pyrolysis processes. Humans are continuously exposed to PAHs which are linked to severe health effects such as diabetes, cancer, infertility, and poor foetal development, amongst others. PAHs are lipophilic compounds prone to accumulating in adipose tissue. Even though adipose tissue is the ideal matrix to assess over time accumulation of lipophilic pollutants, only a few analytical methods have been developed for this matrix. Aiming to reduce the existent gap, a method for the extraction of PAHs from adipose tissue samples using ultrasound-assisted extraction (UAE) was developed. The behaviour of PAHs (retention, adsorption, and volatilization) over several steps of the analytical procedure was studied. Validation tests were performed on the optimized method. PAHs were quantified using a high performance liquid chromatography (HPLC) system equipped with a photodiode array (PDA) and fluorescence (FLD) detector inline. The method achieved a low matrix effect and presents low method detection (MDL) and quantification (MQL) limits, showing suitability for a selective and sensitive determination of PAHs in adipose tissue. The extraction is performed with 0.4 g of adipose tissue and 6 mL of n-hexane and it does not require clean-up afterwards. Additionally, an Eco-Scale score of 74 and an Analytical GREEnness score of 0.66 were obtained. The method achieved is effective, simpler, greener, and easy to perform, being an alternative to conventional extraction methods. Furthermore, this method can be used as a multi-analyte methodology since it has been previously validated by the authors for the analysis of other lipophilic compounds. Naphthalene (Naph), acenaphthene (Ace), fluorene (Flu), phenanthrene (Phe), anthracene (Ant), fluoranthene (Fln), pyrene (Pyr) and benzo[k]fluoranthene (B[k]Ft) were found in all the tested adipose tissue samples.

Development and validation of a modified QuEChERS method for extracting polychlorinated biphenyls and organochlorine pesticides from marine mammal blubber

The monitoring of legacy persistent organic pollutants (POPs) in blubber of key sentinel marine mammal species has been conducted using established techniques for decades. Although these methods for polychlorinated biphenyl (PCB) and organochlorine (OC) pesticide determination provide accurate and reproducible results, they possess some drawbacks in terms of cost, time, and a need for large volumes of toxic solvents. QuEChERS (quick, easy, cheap, effective, rugged, and safe) extractions may help address these issues, but have not been applied to marine mammal blubber/adipose. As such, our aim was to develop, validate, and apply a QuEChERS method for the extraction of PCB and OC contaminants in marine mammal blubber. First, we tested multiple solid-phase extraction and clean-up steps to find the approach that provided the cleanest extracts along with consistent and acceptable analyte recovery, accuracy, and precision. QuEChERS extractions followed by two enhanced matrix removal-lipid (EMR-lipid), one primary-secondary amine (PSA), and one silica gel clean-up showed the highest matrix removal and acceptable recoveries of spiked internal (62-97%) and external standards (61-94%). Solvent usage was reduced by ∼393% and extraction time was reduced by ∼25% (from 16 to 12 h). Next, the method was validated using standard reference material (SRM) NIST 1945. Recovery experiments on SRM (n = 5) showed acceptable recovery for 76% and 77% of PCBs and OC pesticides, respectively, and high precision for 73% and 69% of PCBs and OCs, respectively. Finally, the method was used on a set of southeast Greenland killer whales (n = 13), with previously published PCB and OC data. Bland-Altman plots indicated good agreement between QuEChERS and current-use methods for ΣPCBs and some OCs with no significant constant or proportional bias. These results demonstrate that this QuEChERS extraction method represents an effective, lower cost alternative to current-use extractions for PCBs and OCs in blubber, and likely other high-lipid samples.

Magic extraction: solid-phase extraction and analytical pyrolysis to study polycyclic aromatic hydrocarbon and polychlorinated biphenyls in freshwater

Polycyclic aromatic hydrocarbons and polychlorinated biphenyls are commonly categorized as persistent organic pollutants. In order to analyze these pollutants, customized stationary phases are increasingly being developed and synthesized for solid-phase extraction. In this work, we tested a new solventless solid-phase extraction approach based on the use of a Magic Chemisorber® (Frontier Lab) which consists of a bead-covered polydimethylsiloxane stationary phase with a thickness of 500 µm. These devices are directly immersed into aqueous samples and then introduced into a pyrolysis-gas chromatography-mass spectrometry system equipped with a cryofocusing system for the thermal desorption and analysis of the adsorbed species. Our new method performs better than the most recent solid-phase extraction devices, with limits of detection lower than 2.7 ng/L and limits of quantification lower than 9.0 ng/L. The method was tested on standard compounds and on an environmental sample, showing the potential to characterize other chemical species besides the persistent organic pollutants, such as phthalate plasticizers and antioxidants.