Ciprofloxacin-loaded dissolving polymeric microneedles as a potential therapeutic for the treatment of S. aureus skin infections

Enhancing antibiotic detection via an aptasensor: the case of ciprofloxacin

The need for fast, efficient, and cost-effective test systems for antibiotics is surging, to control resistant bacterial strains. Electrochemical biosensors offer a good alternative to routine laboratory-bound analytical methods. These biosensors are portable, suitable for in-field analysis and biocompatible for detection of small biomolecules. The aim of this work is the ciprofloxacin active pharmaceutical ingredient since resistance of bacteria to this antibiotic is reportedly increasing worldwide, especially in Lebanon where hospitalization bills are no longer affordable. So, the target is ciprofloxacin detection, a fluoroquinolone antibiotic, on screen-printed electrodes. Following diazonium salt, also known as carboxymethylaniline (CMA) deposition, a ciprofloxacin oligonucleotide was incubated on the electrode. This aptamer acts as an anchor for the ciprofloxacin molecule, allowing the latter's attachment to the electrode and its quantification. Electrochemical characterization, through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) allowed for deposition of molecules on electrodes and confirmation that an electrochemical change took place. Scanning Electron Microscope images are used to confirm conformational changes on the surface of electrodes. Impedance results reported a limit of detection of LOD = 3 nM, a dynamic range from 10 nM to 100 µM, and reproducibility of results between two aptasensors to be 10%. Moreover, impedimetric sensor specificity evaluation was through the effect of interfering compounds tobramycin, ofloxacin, norfloxacin and ceftriaxone, on the aptasensor's response. Based on available literature, this LOD level reached allows for the detection of ciprofloxacin via a portable potentiostat in environmental (wastewater, food), biological (urine, saliva) and pharmaceutical samples (efficient market withdrawal of counterfeit medications from pharmaceutical storage facilities).

Chitosan and gelatin based sprayable hydrogels incorporating photothermal and long-acting antibiotic sterilization for infected wound management with shape adaptability

Severe skin damage resulting from acute trauma is often accompanied by uncontrolled bleeding, microbial infections, and delayed wound healing. Herein, multifunctional sprayable hydrogels (CT-CS-ZIF@CIP Gel) were developed for wound management by incorporating antibacterial nanoplatforms (CT-CS-ZIF@CIP) into photocurable gels consisting of chitosan methacrylate and gallic acid grafted gelatin. The nanoplatform was initially constructed by sequentially loading Cu2Se (CS) and ciprofloxacin-decorated zeolitic imidazolate framework-8 (ZIF@CIP) onto Cu-doped Ti MOF (CT), in which CS served as a photothermal agent, ZIF enabled pH-responsive release of CIP, and CT acted as carriers for CS and ZIF@CIP. The hydrogel precursor can be sprayed onto wound surface and photocured quickly, allowing hydrogel to fit the wound shape and form a protective barrier onsite. The resultant hydrogel exhibited excellent hemostatic ability, adhesion properties, cytocompatibility and toxin adsorption capacity. By integrating CS for short-term photothermal therapy with CIP for long-acting chemotherapy, the CT-CS-ZIF@CIP Gel demonstrated 100 % sterilization of three bacterial strains. Furthermore, moderate release of zinc and copper ions promoted wound healing. The therapeutic efficacy of hydrogel was validated in an infected cutaneous mouse model. Overall, this work presents a versatile sprayable hydrogel that can be flexibly applied to irregular dynamic wounds for safe and effective wound management.

Microneedle-based arrays - Breakthrough strategy for the treatment of bacterial and fungal skin infections

Currently, fungal and bacterial skin infections rank among the most challenging public health problems due to the increasing prevalence of microorganisms and the development of resistance to available drugs. A major issue in treating these infections with conventional topical medications is the poor penetration through the stratum corneum, the outermost layer of the skin. The concept of microneedles seems to be a future-proof approach for delivering drugs directly into deeper tissues. By bypassing the skin barrier, microneedle systems allow therapeutic substances to reach deeper layers more efficiently, significantly improving treatment outcomes. Nonetheless, the primary challenges regarding the effectiveness of microneedles involve selecting the appropriate size and shape, along with polymer composition and fabrication technology, to enable controlled and efficient drug release. This review offers a comprehensive overview of the latest knowledge on microneedle types and manufacturing techniques, highlighting their potential effectiveness in treating bacterial and fungal skin infections. It includes updated statistics on infection prevalence and provides a detailed examination of common bacterial and fungal diseases, focusing on their symptoms, causative species, and treatment methods. Additionally, the review addresses safety considerations, regulatory aspects, and future perspectives for microneedle-based therapeutic systems. It also underscores the importance of industrialization and clinical translation efforts, emphasizing the significant potential of microneedle technology for advancing medical applications.

Microneedles as a potential platform for improving antibiotic delivery to bacterial infections

Bacterial infections are mainly managed by the administration of antibiotics, which are either cytotoxic or cytostatic to microbes. In some cases, it is inconvenient to treat infections caused by bacteria using the traditional oral route for antibiotic administration. This can be due to the limited oral bioavailability of antibiotics, their gastrointestinal tract (GIT) adverse effects, and the increased possibility of the appearance of resistant strains. In addition, the fact that many populations are needle-phobic restricts the switch from the oral to the parenteral route. Furthermore, poor drug permeation throughout the stratum corneum of topically applied antibiotics causes low systemic bioavailability. Therefore, microneedles (MNs) have emerged as viable medicinal devices for the delivery of antibiotics, either for local or systemic effects. MNs represent a minimally invasive, painless way of administration that can be self-administered by the patient without the need of medical professionals. This review has specifically focused on MNs as a promising approach for the delivery of antibiotics; it has discussed the different types of MNs, their advantages, and possible limitations for the delivery of antibiotics. Recent studies on the incorporation of antibiotics into various types of MNs, either for topical or transdermal delivery are highlighted, and finally, we present the conclusion and future perspectives.

Emerging Trends in Dissolving-Microneedle Technology for Antimicrobial Skin-Infection Therapies

Skin and soft-tissue infections require significant consideration because of their prolonged treatment duration and propensity to rapidly progress, resulting in severe complications. The primary challenge in their treatment stems from the involvement of drug-resistant microorganisms that can form impermeable biofilms, as well as the possibility of infection extending deep into tissues, thereby complicating drug delivery. Dissolving microneedle patches are an innovative transdermal drug-delivery system that effectively enhances drug penetration through the stratum corneum barrier, thereby increasing drug concentration at the site of infection. They offer highly efficient, safe, and patient-friendly alternatives to conventional topical formulations. This comprehensive review focuses on recent advances and emerging trends in dissolving-microneedle technology for antimicrobial skin-infection therapy. Conventional antibiotic microneedles are compared with those based on emerging antimicrobial agents, such as quorum-sensing inhibitors, antimicrobial peptides, and antimicrobial-matrix materials. The review also highlights the potential of innovative microneedles incorporating chemodynamic, nanoenzyme antimicrobial, photodynamic, and photothermal antibacterial therapies. This review explores the advantages of various antimicrobial therapies and emphasizes the potential of their combined application to improve the efficacy of microneedles. Finally, this review analyzes the druggability of different antimicrobial microneedles and discusses possible future developments.

Trilayer dissolving microneedle for transdermal delivery of minoxidil: a proof-of-concept study

Alopecia areata (AA) is a chronic autoimmune disease characterized by bald patches in certain areas of the body, especially the scalp. Minoxidil (MNX), as a first-line treatment of AA, effectively induces hair growth. However, oral and topical administration pose problems, including low bioavailability, risk of uncontrolled hair growth, and local side effects such as burning hair loss, and scalp irritation. In the latest research, MNX was delivered to the skin via microneedle (MN) transdermally. The MNX concentration was distributed throughout the needle so that drug penetration was reduced and had the potential to irritate. In this study, we formulated MNX into three-layer dissolving microneedles (TDMN) to increase drug penetration and avoid irritation. Physicochemical evaluation, parafilm, was used to evaluate the mechanical strength of TDMN and showed that TDMN could penetrate the stratum corneum. The ex-vivo permeation test showed that the highest average permeation result was obtained for TDMN2, namely 165.28 ± 31.87 ug/cm2, while for Minoxidil cream it was 46.03 ± 8.5 ug/cm2. The results of ex vivo and in vivo dermatokinetic tests showed that the amount of drug concentration remaining in the skin from the TDMN2 formula was higher compared to the cream preparation. The formula developed has no potential for irritation and toxicity based on the HET-CAM test and hemolysis test. TDMN is a promising alternative to administering MNX to overcome MNX problems and increase the effectiveness of AA therapy.

Anti-Nociceptive Effect of Sufentanil Polymeric Dissolving Microneedle on Male Mice by Hot Plate Technique

Background

Despite the widespread use of opioids to manage severe pain, its systemic administration results in side effects. Among the subcutaneous and transdermal drug delivery systems developed to deal with adverse effects, microneedles have drawn attention due to their rapid action, high drug bioavailability, and improved permeability. Sufentanil (SUF) is an effective injectable opioid for treating severe pain. In this study, we investigated the analgesic effects of SUF using dissolvable microneedles.

Methods

SUF polymeric dissolvable microneedles were constructed through the mold casting method and characterized by SEM and FTIR analysis. Its mechanical strength was also investigated using a texture analyzer. Fluorescence microscopy was applied in vitro to measure the penetration depth of microneedle arrays. Irritation and microchannel closure time, drug release profile, and hemocompatibility test were conducted for the validation of microneedle efficiency. Hot plate test was also used to investigate the analgesic effect of microneedle in an animal model.

Results

Local administration of SUF via dissolving microneedles had an effective analgesic impact. One hour after administration, there was no significant difference between the subcutaneous and the microneedle groups, and the mechanical properties were within acceptable limits.

Conclusion

Microneedling is an effective strategy in immediate pain relief compared to the traditional methods.

Unravelling the role of microneedles in drug delivery: Principle, perspectives, and practices

In recent year, the research of transdermal drug delivery systems has got substantial attention towards the development of microneedles (MNs). This shift has occurred due to multifaceted advantages of MNs as they can be utilized to deliver the drug deeper to the skin with minimal invasion, offer successful delivery of drugs and biomolecules that are susceptible to degradation in gastrointestinal tract (GIT), act as biosensors, and help in monitoring the level of biomarkers in the body. These can be fabricated into different types based on their applications as well as material for fabrication. Some of their types include solid MNs, hollow MNs, coated MNs, hydrogel forming MNs, and dissolving MNs. These MNs deliver the therapeutics via microchannels deeper into the skin. The coated and hollow MNs have been found successful. However, they suffer from poor drug loading and blocking of pores. In contrast, dissolving MNs offer high drug loading. These MNs have also been utilized to deliver vaccines and biologicals. They have also been used in cosmetics. The current review covers the different types of MNs, materials used in their fabrication, properties of MNs, and various case studies related to their role in delivering therapeutics, monitoring level of biomarkers/hormones in body such as insulin. Various patents and clinical trials related to MNs are also covered. Covered are the major bottlenecks associated with their clinical translation and potential future perspectives.

Sprayable ciprofloxacin-loaded poloxamer hydrogels for wound infection treatment

Topical antimicrobial treatments for severe burns and chronic wounds provide effective treatment against infections, but cause pain and discomfort with application. This study aimed to develop an antimicrobial topical formulation comprising thermoreversible poloxamers (Pluronic F127 and F68) and a broad-spectrum antimicrobial agent (ciprofloxacin hydrochloride, CH), that could be sprayed to eliminate application pain while maintaining antimicrobial activity. Formulations were characterized to determine their sprayability under cold conditions, gelation temperature, final storage modulus at skin temperature, drug release profile, ex vivo permeation through impaired porcine skin, and inhibition against common bacterial pathogens that colonize wounds. All cold formulations were sprayable from simple hand-held, pump-action sprayers due to their low viscosity. Upon heating, 17 and 20% Pluronic F127 formulations produced hydrogels eight to ten degrees below skin temperature, independent of ciprofloxacin loading. Increasing concentrations of Pluronic F127 increased the final storage modulus and viscosity of the gels, while inclusion of Pluronic F68 reduced these properties, showing that hydrogel rheological properties at skin temperature can be tuned via choice of formulation. Drug release was directly correlated to the rheological properties, with stiffer gels resulting in a decrease in drug release rate. Overall, gels released about 65-90% of their load within 12 hours. Ex vivo skin permeation demonstrated that drug was well retained in impaired porcine skin, which is desired to continuously treat bacteria localized to the wound. A well-diffusion assay indicated that the hydrogels had greater bacterial inhibition against Pseudomonas aeruginosa, Escherichia coli, and two strains of Staphylococcus aureus when compared to commercial controls. Overall, the results show the potential of CH-loaded poloxamer formulations as suitable sprayable topical dressings to deliver antimicrobials directly to wounds.

Enhanced skin drug delivery using dissolving microneedles: a potential approach for the management of skin disorders

INTRODUCTION

For decades, finding effective long-term or disease-modifying treatments for skin disorders has been a major focus of scientists. The conventional drug delivery systems showed poor efficacy with high doses and are associated with side effects, which lead to challenges in adherence to therapy. Therefore, to overcome the limitations of conventional drug delivery systems, drug delivery research has focused on topical, transdermal, and intradermal drug delivery systems. Among all, the dissolving microneedles have gained attention with a new range of advantages of drug delivery in skin disorders such as breaching skin barriers with minimal discomfort and its simplicity of application to the skin, which allows patients to administer it themselves.

AREAS COVERED

This review highlighted the insights into dissolving microneedles for different skin disorders in detail. Additionally, it also provides evidence for its effective utilization in the treatment of various skin disorders. The clinical trial status and patents for dissolving microneedles for the management of skin disorders are also covered.

EXPERT OPINION

The current review on dissolving microneedles for skin drug delivery is accentuating the breakthroughs achieved so far in the management of skin disorders. The output of the discussed case studies anticipated that dissolving microneedles can be a novel drug delivery strategy for the long-term treatment of skin disorders.