Single-pass Kelvin force microscopy and dC/dZ measurements in the intermittent contact: applications to polymer materials

Nanoscale capacitance spectroscopy based on multifrequency electrostatic force microscopy

We present multifrequency heterodyne electrostatic force microscopy (MFH-EFM) as a novel electrostatic force microscopy method for nanoscale capacitance characterization at arbitrary frequencies above the second cantilever resonance. Besides a high spatial resolution, the key advantage of the multifrequency approach of MFH-EFM is that it measures the second-order capacitance gradient at almost arbitrary frequencies, enabling the measurement of the local dielectric function over a wide range of frequencies. We demonstrate the reliable operation of MFH-EFM using standard atomic force microscopy equipment plus an external lock-in amplifier up to a frequency of 5 MHz, which can in principle be extended to gigahertz frequencies and beyond. Our results show a significant reduction of signal background from long-range electrostatic interactions, resulting in highly localized measurements. Combined with refined tip-sample capacitance models, MFH-EFM will enhance the precision of quantitative studies on dielectric effects in nanoscale systems across materials science, biology, and nanotechnology, complementing established methods in the field.

Nanoscale mapping of electric polarizability in a heterogeneous dielectric material with surface irregularities

Nanoscale mapping of electric polarizability in a heterogeneous dielectric material with surface irregularities is of scientific and technical significance, but remains challenging. Here, we present an approach based on intermodulation electrostatic force microscopy (EFM) in conjunction with finite element computation for precise and high-resolution mapping of polarizability in dielectric materials. Instead of using electrostatic force in conventional quantitative EFM approaches, the force gradient is acquired to achieve an unprecedented spatial resolution. In the meantime, the finite element model is applied to eliminate the interference from the heterogeneity and surface irregularity of the sample. This approach directly reveals the high polarization ability of the amorphous region in a ferroelectric, semi-crystalline polymer with significant surface roughness, i.e. poly (vinylidene fluoride-co-chlorotrifluoroethylene), in which the result is consistent with the predicted data in the latest research. This work presenting a quantitative approach to nanoscale mapping of electric polarizability with unprecedented spatial resolution may help to reveal the complex property-structure correlation in heterogeneous dielectric materials.

Scanning Probe Spectroscopy of WS2/Graphene Van Der Waals Heterostructures

In this paper, we present a study of tungsten disulfide (WS2) two-dimensional (2D) crystals, grown on epitaxial Graphene. In particular, we have employed scanning electron microscopy (SEM) and µRaman spectroscopy combined with multifunctional scanning probe microscopy (SPM), operating in peak force-quantitative nano mechanical (PF-QNM), ultrasonic force microscopy (UFM) and electrostatic force microscopy (EFM) modes. This comparative approach provides a wealth of useful complementary information and allows one to cross-analyze on the nanoscale the morphological, mechanical, and electrostatic properties of the 2D heterostructures analyzed. Herein, we show that PF-QNM can accurately map surface properties, such as morphology and adhesion, and that UFM is exceptionally sensitive to a broader range of elastic properties, helping to uncover subsurface features located at the buried interfaces. All these data can be correlated with the local electrostatic properties obtained via EFM mapping of the surface potential, through the cantilever response at the first harmonic, and the dielectric permittivity, through the cantilever response at the second harmonic. In conclusion, we show that combining multi-parametric SPM with SEM and µRaman spectroscopy helps to identify single features of the WS2/Graphene/SiC heterostructures analyzed, demonstrating that this is a powerful tool-set for the investigation of 2D materials stacks, a building block for new advanced nano-devices.

Revealing the Surface Effect on Gas Transport and Mechanical Properties in Nonporous Polymeric Membranes in Terms of Surface Free Energy

The contribution of surface roughness of nonporous polymeric membranes to their gas separation and mechanical properties was studied in terms of surface free energy. The membranes samples were prepared based on glassy polymers with different chain rigidity, namely polysulfone (PSU), cellulose triacetate (CTA), and poly(vinyl alcohol) (PVA). The results were obtained by atomic force and scanning electron microscopy (AFM and SEM) with individual gas permeation, wettability, and mechanical testing. The specific surface free energy (as well as its polar and dispersive components) for the polymers was calculated by the Owens-Wendt method. It was proven that the surface roughness of the polymer membranes affects both energy components; however, the degree of this influence depends on the chemical nature of the corresponding polymer. Moreover, it was assumed that the dispersive energy component is inversely correlated with any gases' total permeability. In contrast, the polar one is inversely correlated with the permeability by gases with the ability for site-specific interactions. The gas separation results confirmed this assumption. It was also shown that the mechanical properties of the polymer membranes are also influenced by the surface energy, namely, its dispersive component.

AFM-Based Characterization of Electrical Properties of Materials

Capabilities of atomic force microscopy (AFM) for characterization of local electrical properties of materials are presented in this chapter. At the beginning the probe-sample force interactions, which are employed for detection of surface topography and materials properties, are described theoretically in their application in different AFM modes and electrical techniques. The electrical techniques, which are based on detection of electrostatic probe-sample forces, are outlined in AFM contact and oscillatory resonant modes. The basic features of the detection of surface potential and capacitance gradients are explained. The applications of these techniques are illustrated on metals, surfactant compounds, semiconductors, and different polymers. Practical recommendations on use of the AFM-based electrical methods and the related challenges are given in the last section.

Towards nanoscale electrical measurements in liquid by advanced KPFM techniques: a review

Fundamental mechanisms of energy storage, corrosion, sensing, and multiple biological functionalities are directly coupled to electrical processes and ionic dynamics at solid-liquid interfaces. In many cases, these processes are spatially inhomogeneous taking place at grain boundaries, step edges, point defects, ion channels, etc and possess complex time and voltage dependent dynamics. This necessitates time-resolved and real-space probing of these phenomena. In this review, we discuss the applications of force-sensitive voltage modulated scanning probe microscopy (SPM) for probing electrical phenomena at solid-liquid interfaces. We first describe the working principles behind electrostatic and Kelvin probe force microscopies (EFM & KPFM) at the gas-solid interface, review the state of the art in advanced KPFM methods and developments to (i) overcome limitations of classical KPFM, (ii) expand the information accessible from KPFM, and (iii) extend KPFM operation to liquid environments. We briefly discuss the theoretical framework of electrical double layer (EDL) forces and dynamics, the implications and breakdown of classical EDL models for highly charged interfaces or under high ion concentrations, and describe recent modifications of the classical EDL theory relevant for understanding nanoscale electrical measurements at the solid-liquid interface. We further review the latest achievements in mapping surface charge, dielectric constants, and electrodynamic and electrochemical processes in liquids. Finally, we outline the key challenges and opportunities that exist in the field of nanoscale electrical measurements in liquid as well as providing a roadmap for the future development of liquid KPFM.

Dipole-like electrostatic asymmetry of gold nanorods

The symmetry of metallic nanocolloids, typically envisaged as simple geometrical shapes, is rarely questioned. However, the symmetry considerations are so essential for understanding their electronic structure, optical properties, and biological effects that it is important to reexamine these foundational assumptions for nanocolloids. Gold nanorods (AuNRs) are generally presumed to have nearly perfect geometry of a cylinder and therefore are centrosymmetric. We show that AuNRs, in fact, have a built-in electrostatic potential gradient on their surface and behave as noncentrosymmetric particles. The electrostatic potential gradient of 0.11 to 0.07 V/nm along the long axes of nanorods is observed by off-axis electron holography. Kelvin probe microscopy, secondary electron imaging, energy-filtered transmission electron microscopy, and plasmon mapping reveal that the axial asymmetry is associated with a consistently unequal number of cetyltrimethylammonium bromide moieties capping the two ends of the AuNRs. Electrostatic field maps simulated for the AuNR surface reproduce the holography images. The dipole-like surface potential gradient explains previously puzzling discrepancies in nonlinear optical effects originating from the noncentrosymmetric nature of AuNRs. Similar considerations of symmetry breaking are applicable to other nanoscale structures for which the property-governing symmetry of the organic shell may differ from the apparent symmetry of inorganic core observed in standard electron microscopy images.

Nanoconfined water can orient and cause long-range dipolar interactions with biomolecules

Surface properties are generally determined by the top most surface layer also defining how molecules adsorb onto it. By exploring effects due to interactions with deeper subsurface layers, however, long-range interaction forces were found to also significantly contribute to molecular adsorption, in which hydration of the subsurface region is the key factor. Water molecules confined to a subsurface amphiphilic gradient are confirmed to cause these long-range dipolar interactions by preferential orientation, thus significantly changing the way how a protein interacts with the surface. These findings imply future exploitation of an additional factor to modulate adsorption processes.

Distinguishing between Mechanical and Electrostatic Interaction in Single Pass Multi Frequency Electrostatic Force Microscopy Measurements on a Molecular Material

Single-pass electrostatic force microscopy is postulated as one of the most advanced techniques in terms of spatial resolution and fastness in data acquisition for the study of electrostatic phenomena at the nanoscale. However, crosstalk anomalies, in which mechanical interactions combine with tip-sample electrostatic forces, are still a major issue to overcome, specifically in soft and biological samples. In this paper we propose a novel method based on bimodal-atomic force microscopy to distinguish mechanical crosstalk from electrostatic images. The method is based in the comparison of bimodal AFM images with electrostatic ones, where pure mechanical interaction can be discerned from a mixture of mechanical and electrostatic interactions. The proposed method is optimized and demonstrated using a supramolecular charge transfer material. Finally, the method is used as a tool to depict different crosstalk levels in tetrathiafulvalene-based (TTF) assemblies, discerning between electrical and mechanical interactions. This kind of observation is important for obtaining accurate descriptions of charge distribution in samples made from organic and molecular layers and materials.

Nanoscale characteristics of antibacterial cationic polymeric brushes and single bacterium interactions probed by force microscopy

A direct probing technique was applied to PEI brushes to investigate bacteria–PEI brush interactions in a single bacterium resolution.

Structure and effects of gold nanoparticles in bacterial cellulose–polyaniline conductive membranes

Bacterial cellulose (BC) and poly(aniline) (PANI) composites were successfully synthesized by in situ polymerization of aniline by ammonium persulphate (APS) in the presence and absence of gold nanoparticles.

Kelvin probe force microscopy for local characterisation of active nanoelectronic devices

Frequency modulated Kelvin probe force microscopy (FM-KFM) is the method of choice for high resolution measurements of local surface potentials, yet on coarse topographic structures most researchers revert to amplitude modulated lift-mode techniques for better stability. This approach inevitably translates into lower lateral resolution and pronounced capacitive averaging of the locally measured contact potential difference. Furthermore, local changes in the strength of the electrostatic interaction between tip and surface easily lead to topography crosstalk seen in the surface potential. To take full advantage of the superior resolution of FM-KFM while maintaining robust topography feedback and minimal crosstalk, we introduce a novel FM-KFM controller based on a Kalman filter and direct demodulation of sidebands. We discuss the origin of sidebands in FM-KFM irrespective of the cantilever quality factor and how direct sideband demodulation enables robust amplitude modulated topography feedback. Finally, we demonstrate our single-scan FM-KFM technique on an active nanoelectronic device consisting of a 70 nm diameter InAs nanowire contacted by a pair of 120 nm thick electrodes.

Determination of High-Frequency Dielectric Constant and Surface Potential of Graphene Oxide and Influence of Humidity by Kelvin Probe Force Microscopy

We use Kelvin probe force microscopy (KPFM) and capacitance coupling (dC/dz) to study the electrical properties of graphene oxide (GO). We propose using the dC/dz signal to probe the high frequency dielectric constant of mono- and few-layer GO. Our measurements suggest that the dynamic dielectric constant of GO is on the order of εGO ≅ 3.0 ε0, in the high frequency limit, and independent of the number of GO layers. The measurements are performed at a humidity controlled environment (5% of humidity). The effects of increasing humidity on both the dC/dz and KPFM measurements are analyzed.

Adhesive and Reinforcing Properties of Soluble Cellulose: A Repulpable Adhesive for Wet and Dry Cellulosic Substrates

This work reports, for the first time, the excellent performance of an aqueous alkaline solution of cellulose as an adhesive for wet and dry cellulosic substrates. Uniaxial tensile tests of filter paper and sulfite writing paper strips bonded with this adhesive (5% cellulose and 7% NaOH aqueous solution) show that failure never occurs in the joints but always in the pristine substrate areas, except in butt joint samples prepared with sulfite paper. Tensile test also shows that paper impregnated with cellulose solution is stronger than the original substrate. X-ray microtomography and scanning electron microscopy reveal that dissolved cellulose fills the gaps between paper fibers, providing a morphological evidence for the mechanical interlocking adhesion mechanism, while scanning probe techniques provide a sharp view of different domains in the joints. Additionally, bonded paper is easily reconverted to pulp, which facilitates paper reprocessability, solving a well-known industrial problem related to deposition of adhesive aggregates (stickies) on the production equipment.

Depth-sensitive subsurface imaging of polymer nanocomposites using second harmonic Kelvin probe force microscopy

We study the depth sensitivity and spatial resolution of subsurface imaging of polymer nanocomposites using second harmonic mapping in Kelvin Probe Force Microscopy (KPFM). This method allows the visualization of the clustering and percolation of buried Single Walled Carbon Nanotubes (SWCNTs) via capacitance gradient (∂C/∂z) maps. We develop a multilayered sample where thin layers of neat Polyimide (PI) (∼80 nm per layer) are sequentially spin-coated on well-dispersed SWCNT/Polyimide (PI) nanocomposite films. The multilayer nanocomposite system allows the acquisition of ∂C/∂z images of three-dimensional percolating networks of SWCNTs at different depths in the same region of the sample. We detect CNTs at a depth of ∼430 nm, and notice that the spatial resolution progressively deteriorates with increasing depth of the buried CNTs. Computational trends of ∂C/∂z vs CNT depth correlate the sensitivity and depth resolution with field penetration and spreading, and enable a possible approach to three-dimensional subsurface structure reconstruction. The results open the door to nondestructive, three-dimensional tomography and nanometrology techniques for nanocomposite applications.

Sub-surface imaging of carbon nanotube-polymer composites using dynamic AFM methods

High-resolution sub-surface imaging of carbon nanotube (CNT) networks within polymer nanocomposites is demonstrated through electrical characterization techniques based on dynamic atomic force microscopy (AFM). We compare three techniques implemented in the single-pass configuration: DC-biased amplitude modulated AFM (AM-AFM), electrostatic force microscopy (EFM) and Kelvin probe force microscopy (KPFM) in terms of the physics of sub-surface image formation and experimental robustness. The methods were applied to study the dispersion of sub-surface networks of single-walled nanotubes (SWNTs) in a polyimide (PI) matrix. We conclude that among these methods, the KPFM channel, which measures the capacitance gradient (∂C/∂d) at the second harmonic of electrical excitation, is the best channel to obtain high-contrast images of the CNT network embedded in the polymer matrix, without the influence of surface conditions. Additionally, we propose an analysis of the ∂C/∂d images as a tool to characterize the dispersion and connectivity of the CNTs. Through the analysis we demonstrate that these AFM-based sub-surface methods probe sufficiently deep within the SWNT composites, to resolve clustered networks that likely play a role in conductivity percolation. This opens up the possibility of dynamic AFM-based characterization of sub-surface dispersion and connectivity in nanostructured composites, two critical parameters for nanocomposite applications in sensors and energy storage devices.

Reversible mechano-electrochemical writing of metallic nanostructures with the tip of an atomic force microscope

We recently introduced a method that allows the controlled deposition of nanoscale metallic patterns at defined locations using the tip of an atomic force microscope (AFM) as a "mechano-electrochemical pen", locally activating a passivated substrate surface for site-selective electrochemical deposition. Here, we demonstrate the reversibility of this process and study the long-term stability of the resulting metallic structures. The remarkable stability for more than 1.5 years under ambient air without any observable changes can be attributed to self-passivation. After AFM-activated electrochemical deposition of copper nanostructures on a polycrystalline gold film and subsequent AFM imaging, the copper nanostructures could be dissolved by reversing the electrochemical potential. Subsequent AFM-tip-activated deposition of different copper nanostructures at the same location where the previous structures were deleted, shows that there is no observable memory effect, i.e., no effect of the previous writing process on the subsequent writing process. Thus, the four processes required for reversible information storage, "write", "read", "delete" and "re-write", were successfully demonstrated on the nanometer scale.

Polymer blend lithography: A versatile method to fabricate nanopatterned self-assembled monolayers

A rapid and cost-effective lithographic method, polymer blend lithography (PBL), is reported to produce patterned self-assembled monolayers (SAM) on solid substrates featuring two or three different chemical functionalities. For the pattern generation we use the phase separation of two immiscible polymers in a blend solution during a spin-coating process. By controlling the spin-coating parameters and conditions, including the ambient atmosphere (humidity), the molar mass of the polystyrene (PS) and poly(methyl methacrylate) (PMMA), and the mass ratio between the two polymers in the blend solution, the formation of a purely lateral morphology (PS islands standing on the substrate while isolated in the PMMA matrix) can be reproducibly induced. Either of the formed phases (PS or PMMA) can be selectively dissolved afterwards, and the remaining phase can be used as a lift-off mask for the formation of a nanopatterned functional silane monolayer. This "monolayer copy" of the polymer phase morphology has a topographic contrast of about 1.3 nm. A demonstration of tuning of the PS island diameter is given by changing the molar mass of PS. Moreover, polymer blend lithography can provide the possibility of fabricating a surface with three different chemical components: This is demonstrated by inducing breath figures (evaporated condensed entity) at higher humidity during the spin-coating process. Here we demonstrate the formation of a lateral pattern consisting of regions covered with 1H,1H,2H,2H-perfluorodecyltrichlorosilane (FDTS) and (3-aminopropyl)triethoxysilane (APTES), and at the same time featuring regions of bare SiO(x). The patterning process could be applied even on meter-sized substrates with various functional SAM molecules, making this process suitable for the rapid preparation of quasi two-dimensional nanopatterned functional substrates, e.g., for the template-controlled growth of ZnO nanostructures [1].

Effect of the molecular structure on the hierarchical self-assembly of semifluorinated alkanes at the air/water interface

Semifluorinated alkanes (C(n)F(2n+1)C(m)H(2m+1)), short FnHm display local phase separation of mutually incompatible hydrocarbon and fluorocarbon chain moieties, which has been utilized as a structure-forming motif in supramolecular architectures. The packing of semifluorinated alkanes, nominally based on dodecyl subunits, such as perfluoro(dodecyl)dodecane (F12H12) and perfluoro(dodecyl)eicosane (F12H20), as well as a core extended analogue, 1,4-dibromo-2-((perfluoroundecyl)methoxy)-5-(dodecyloxy)benzene) (F11H1-core-H12), was studied at the air/water interface. Langmuir monolayers were investigated by means of neutron reflectivity directly at the air/water interface and scanning force microscopy after transfer to silicon wafers. Narrowly disperse surface micelles formed in all three cases; however, they were found to bear different morphologies with respect to molecular orientation and assembly dimensionality, which gives rise to different hierarchical aggregate topologies. For F12H12, micelles of ca. 30 nm in diameter, composed of several circular or "spherical cap" substructures, were observed and a monolayer model with the fluorocarbon block oriented toward air is proposed. F12H20 molecules formed larger (ca. 50 nm diameter) hexagonally shaped surface micelles that were hexagonally, densely packed, besides more elongated but tightly interlocked wormlike structures. Conversely, F11H1-core-H12 films organized into linear rows of elongated surface micelles with comparable width, but an average length of ca. 400 nm, apparently formed by antiparallel molecular packing.