Photocatalysts for Solar-Induced Water Disinfection: New Developments and Opportunities

Enhanced disinfection of E. faecalis and levofloxacin antibiotic degradation using tridoped B-Ce-Ag TiO2 photocatalysts synthesized by ecofriendly citrate EDTA complexing method

Since its use for photochemical water splitting reported first in 1972, TiO₂ is one of the most extensively studied photocatalysts for a diverse range of applications. Monodoping or codoping of the catalyst is a proven strategy to enhance the functionality of TiO₂ under solar or visible light. However, the use of three or more dopants in the development of more efficient and visible light active photocatalysts has not been investigated widely, especially for microbial disinfection. Boron/cerium/silver tridoped TiO₂ photocatalysts with curated amounts of the dopants (B = 1, 2 at.%, Ce = 0.1 at.%, Ag = 0.06 at.%), synthesized by the ecofriendly EDTA-citrate method, were evaluated for the disinfection of water using Enterococcus faecalis under UV-A irradiation and degradation of levofloxacin antibiotic under solar light. The catalyst characterization revealed that the spherical nanoparticles had a crystallite size of ~ 13 nm and bandgap energy values of 2.8-2.9 eV. 2B-0.1Ce-0.06Ag-TiO₂ is the best catalyst for microbial disinfection with a log reduction and kinetic rate constant ~ 30 and ~ 4.5 times higher than those values determined for the other codoped or monodoped catalysts, confirming an enhanced performance. Regarding levofloxacin degradation, the best performing catalyst is 1B-0.1Ce-0.06Ag-TiO₂ with degradation of 99% and 83% COD reduction in 100 min. The tridoped photocatalysts are very effective in the inactivation of Enterococcus faecalis, thus solving the problem of antimicrobial resistance in waters containing antibiotic residues.

Photocatalytic TiO2 nanomaterials as potential antimicrobial and antiviral agents: Scope against blocking the SARS-COV-2 spread

The whole world is struggling with current coronavirus pandemic that shows urgent need to develop novel technologies, medical innovations or innovative materials for controlling SARS-CoV-2 infection. The mode of infection of SARS-CoV-2 is still not well known and seems to spread through surface, air, and water. Therefore, the whole surrounding environment needs to be disinfected with continuous function. For that purpose, materials with excellent antiviral properties, cost effective, environmental friendly and practically applicable should be researched. Titanium dioxide (TiO₂) under ultraviolet light produces strong oxidative effect and is utilized as photocatalytic disinfectant in biomedical field. TiO₂ based photocatalysts are effective antimicrobial/antiviral agents under ambient conditions with potential to be used even in indoor environment for inactivation of bacteria/viruses. Interestingly, recent studies highlight the effective disinfection of SARS-CoV-2 using TiO₂ photocatalysts. Here, scope of TiO₂ photocatalysts as emerging disinfectant against SARS-CoV-2 infection has been discussed in view of their excellent antibacterial and antiviral activities against various bacteria and viruses (e.g. H1N1, MNV, HSV, NDV, HCoV etc.). The current state of development of TiO₂ based nano-photocatalysts as disinfectant shows their potential to combat with SARS-CoV-2 viral infection and are promising for any other such variants or viruses, bacteria in future studies.

ZrO2/ZnO/TiO2 Nanocomposite Coatings on Stainless Steel for Improved Corrosion Resistance, Biocompatibility, and Antimicrobial Activity

The ultrathin nanocomposite coatings made of zirconium oxide (ZrO₂), zinc oxide (ZnO), and titanium oxide (TiO₂) on stainless steel (SS) were prepared by the radio frequency sputtering method, and the effects of the nanocomposite coating on corrosion protection and antibacterial activities of nanocomposite coated SS were investigated. Scanning electron microscopy was conducted to observe surface morphology of nanocomposite coatings with distinct distribution of grains with the formation on SS substrate. From the electrochemical impedance spectroscopy results, ZrO₂/ZnO/TiO₂ nanocomposite coating showed excellent corrosion protection performance at 37 °C during immersion in simulated body fluid and saliva solution for 12 and 4 weeks, respectively. The impedance of ZrO₂/ZnO/TiO₂ (40/10/50) nanocomposite coated SS exhibited values about 5 orders of magnitude higher than that of uncoated SS with polarization at the low-frequency region. Cell viability of ZrO₂/ZnO/TiO₂ nanocomposite coated SS was examined under mouse fibroblasts culture (L929), and it was observed that the nanocomposite coating improves proliferation through effective cellular attachment compared to uncoated SS. From the antimicrobial activity results, ZrO₂/ZnO/TiO₂ nanocomposite-coated SS showed killing efficiency of 81.2% and 72.4% against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus, respectively.

Photocatalytic degradation of amoxicillin from aqueous solutions by titanium dioxide nanoparticles loaded on graphene oxide

The photocatalytic degradation of amoxicillin (AMX) by titanium dioxide nanoparticles loaded on graphene oxide (GO/TiO₂) was evaluated under UV light. Experimental results showed that key parameters such as initial pH, GO/TiO₂ dosage, UV intensity, and initial AMX concentration had a significant effect on AMX degradation. Compared to the photolysis and adsorption processes, the AMX degradation efficiency was obtained to be more than 99% at conditions including pH of 6, the GO/TiO₂ dosage of 0.4 g/L, the AMX concentration of 50 mg/L, and the intensity of 36 W. Trapping tests showed that all three hydroxyl radical (OH^•), superoxide radical (O₂^•-), and hole (h⁺) were produced in the photocatalytic process; however, h⁺ plays a major role in AMX degradation. Under UV irradiation, GO/TiO₂ showed excellent stability and recyclability for 4 consecutive reaction cycles. The analysis of total organic carbon (TOC) suggested that AMX could be well degraded into CO₂ and H₂O. The formation of NH₄⁺, NO₃^-, and SO₄^2- as a result of AMX degradation confirmed the good mineralization of AMX in the GO/TiO₂/UV process. The toxicity of the inlet and outlet samples of the process has been investigated by cultivation of Escherichia coli and Streptococcus faecalis, and the results showed that the condition is suitable for the growth of organisms. The photocatalytic degradation mechanism was proposed based on trapping and comparative tests. Based on the results, the GO/TiO₂/UV process can be considered as a promising technique for AMX degradation due to photocatalyst stability, high mineralization efficiency, and effluent low toxicity.

Nano Antiviral Photodynamic Therapy: a Probable Biophysicochemical Management Modality in SARS-CoV-2

INTRODUCTION

COVID-19 disease has shocked the world by its spread and contagiousness. At this time, there is no valid vaccine and no proven drug treatment for COVID-19 patients. Current treatments are focused on Oxygenation, Cytokine Storm management, anti-inflammatory effects, and antiviral therapy. Antiviral photodynamic therapy (aPDT) is based on the reaction between a photo-sensitive agent and a light source in the presence of oxygen which can produce oxidative and free radical agents to damage the virus' structures. Recent studies show that nanotechnology can improve aPDT's outcome. The aim of this study was to find out the potential therapeutic effects of Nano antiviral photodynamic therapy on COVID-19.

AREAS COVERED

This review evaluates Nano Antiviral Photodynamic Therapy: A Probable Biophysicochemical Management Modality in SARS-CoV-2. Data were extracted from published different studies published on PUBMED, SCOPUS, and Web of Science.

EXPERT OPINION

Studies indicating that aPDT and Nano-based aPDT can be useful in viral pulmonary complications like Influenza, SARS-CoV, and MERS, but there was no direct study on SARS-Cov-2. Recent studies showed that Nano-based aPDT could relate to control of the stages of viral infections. Altogether, further investigations for the application of nanomedicine in antimicrobial photodynamic inactivation are needed for COVID-19 Management.

Trends and targets in antiviral phototherapy

Photodynamic therapy (PDT) is a well-established treatment option in the treatment of certain cancerous and pre-cancerous lesions. Though best-known for its application in tumor therapy, historically the photodynamic effect was first demonstrated against bacteria at the beginning of the 20^th century. Today, in light of spreading antibiotic resistance and the rise of new infections, this photodynamic inactivation (PDI) of microbes, such as bacteria, fungi, and viruses, is gaining considerable attention. This review focuses on the PDI of viruses as an alternative treatment in antiviral therapy, but also as a means of viral decontamination, covering mainly the literature of the last decade. The PDI of viruses shares the general action mechanism of photodynamic applications: the irradiation of a dye with light and the subsequent generation of reactive oxygen species (ROS) which are the effective phototoxic agents damaging virus targets by reacting with viral nucleic acids, lipids and proteins. Interestingly, a light-independent antiviral activity has also been found for some of these dyes. This review covers the compound classes employed in the PDI of viruses and their various areas of use. In the medical area, currently two fields stand out in which the PDI of viruses has found broader application: the purification of blood products and the treatment of human papilloma virus manifestations. However, the PDI of viruses has also found interest in such diverse areas as water and surface decontamination, and biosafety.

An ion exchange approach assembled multi-dimensional hierarchical Fe–TiO2 composite micro-/nano multi-shell hollow spheres for bacteria lysis through utilizing visible light

Ion exchange for (a) 6 h Fe penetrated sphere resulting in (b) uncompact pores and (c) loose shells and (d) 24 h Fe penetrated sphere resulting in (e) compact pores and (f) smooth shells.