Nonlamellar liquid crystals: a new paradigm for the delivery of small molecules and bio-macromolecules

Melatonin and the nervous system: nanomedicine perspectives

The mechanism of action of melatonin on the nervous system, sleep, cognitive deficits, and aging is not fully understood. Neurodegenerative diseases (ND) are one of the leading causes of disability and mortality worldwide. Sleeping and cognitive impairments also represent common and serious public health problems, particularly deteriorating with the aging process. Melatonin, as a neuromodulatory hormone, regulates circadian rhythms and the sleep-wake cycle, with functions extending to antioxidant, anti-inflammatory, neuroprotective, and anti-aging properties. However, melatonin is a hydrophobic compound with relatively low water solubility and a short half-life. While melatonin can cross the blood-brain barrier, exogenous melatonin administered orally or intravenously has poor bioavailability, undergoes rapid metabolism in the circulation, and shows limited brain accumulation, ultimately compromising its therapeutic efficacy. In recent years, the convergence of melatonin research with nanomedicine ensures safe therapeutic uses, limited drug degradation, and perspectives for targeted drug delivery to the central nervous system. Here we outline the promising neurotherapeutic properties of nanomaterials as carriers loaded with melatonin drug alone or in combinations with other active molecules.

Lyotropic liquid crystalline 2D and 3D mesophases: Advanced materials for multifunctional anticancer nanosystems

Cancer remains a leading cause of mortality. Despite significant breakthroughs in conventional therapies, treatment is still far from ideal due to high toxicity in normal tissues and therapeutic inefficiency caused by short drug lifetime in the body and resistance mechanisms. Current research moves towards the development of multifunctional nanosystems for delivery of chemotherapeutic drugs, bioactives and/or radionuclides that can be combined with other therapeutic modalities, like gene therapy, or imaging to use in therapeutic screening and diagnosis. The preparation and characterization of Lyotropic Liquid Crystalline (LLC) mesophases self-assembled as 2D and 3D structures are addressed, with an emphasis on the unique properties of these nanoassemblies. A comprehensive review of LLC nanoassemblies is also presented, highlighting the most recent advances and their outstanding advantages as drug delivery systems, including tailoring strategies that can be used to overcome cancer challenges. Therapeutic agents loaded in LLC nanoassemblies offer qualitative and quantitative enhancements that are superior to conventional chemotherapy, particularly in terms of preferential accumulation at tumor sites and promoting enhanced cancer cell uptake, lowering tumor volume and weight, improving survival rates, and increasing the cytotoxicity of their loaded therapeutic agents. In terms of quantitative anticancer efficacy, loaded LLC nanoassemblies reduced the IC50 values from 1.4-fold against lung cancer cells to 125-fold against ovarian cancer cells.

Remote Loading of Hydrophilic Drug into Cubosomes by Transmembrane pH-Gradient and Characterization of Drug-Loaded Cubosomes Prepared by Different Method

The encapsulation efficiency (EE) of hydrophobic drug into cubosomes was high by conventional methods, while poor for the hydrophilic drug. In this study, a remote loading method based on transmembrane pH-gradient was applied to prepare hydrophilic drug loaded cubosomes. Several hydrophilic drugs were selected and studied. Results showed just part of the investigated drugs were successfully loaded into cubosomes by the remote loading method, whereas all the drugs failed to be encapsulated by the high-pressure homogenization method. The EE based on remote loading method was affected by the solubility, LogP, number of rings, and polarizability of the drug independent of the number of hydrogen acceptor and hydrogen donor. And the drugs that had high EE by remote loading method were BCS class 1 or 2. In addition, the EE base on remote loading method was significantly affected by the external water pH of cubosomes and drug concentration. The size of drug-loaded cubosomes by remote loading method mainly depended on the pre-formed blank cubosomes, which was bigger than that by high-pressure homogenization method. The preparation method affected the liquid crystalline structure of acidic drug loaded cubosomes, while showed no obvious effect on that of basic drug loaded cubosomes. The release of drug was susceptible to the pH of release medium independent of the preparation method. The drug-loaded cubosomes prepared by different method all showed favorable stability during storage. The remote loading method was a promising approach for the efficient encapsulation of hydrophilic drug into cubosomes. This study laid a foundation for the application of remote loading method on the preparation of hydrophilic drug loaded cubosomes.

Lipidic lyotropic liquid crystals: Insights on biomedical applications

Liquid crystals (LCs) possess unique physicochemical properties, translatable into a wide range of applications. To date, lipidic lyotropic LCs (LLCs) have been extensively explored in drug delivery and imaging owing to the capability to encapsulate and release payloads with different characteristics. The current landscape of lipidic LLCs in biomedical applications is provided in this review. Initially, the main properties, types, methods of fabrication and applications of LCs are showcased. Then, a comprehensive discussion of the main biomedical applications of lipidic LLCs accordingly to the application (drug and biomacromolecule delivery, tissue engineering and molecular imaging) and route of administration is examined. Further discussion of the main limitations and perspectives of lipidic LLCs in biomedical applications are also provided. STATEMENT OF SIGNIFICANCE: Liquid crystals (LCs) are those systems between a solid and liquid state that possess unique morphological and physicochemical properties, translatable into a wide range of biomedical applications. A short description of the properties of LCs, their types and manufacturing procedures is given to serve as a background to the topic. Then, the latest and most innovative research in the field of biomedicine is examined, specifically the areas of drug and biomacromolecule delivery, tissue engineering and molecular imaging. Finally, prospects of LCs in biomedicine are discussed to show future trends and perspectives that might be utilized. This article is an ampliation, improvement and actualization of our previous short forum article "Bringing lipidic lyotropic liquid crystal technology into biomedicine" published in TIPS.

Sustained release of azithromycin from lipid liquid-crystalline nanoparticles laden in situ gel for the treatment of periodontitis: In vitro and efficacy study

Periodontitis is a chronic inflammatory disease affecting teeth, periodontal ligament and alveolar bone. Current treatment options include surgery or oral antibiotics. Oral dosage forms shows systemic side effects due to frequent dosing and it failed to reach the therapeutic concentration in the periodontal cavity. In this work, a novel in situ gel loaded with azithromycin laden lipid liquid-crystalline nanoparticles (cubosomes) was formulated for effective treatment of periodontitis. Cubosomes were prepared using DL-α-monoolein (MO) and Pluronic^®F-127, and characterized for size, zeta potential, shape, and entrapment efficacy. In situ gel laden cubosomes were evaluated for pH, drug content, viscosity, syringeability, mucoadhesive strength, texture profile, gelation temperature, gel strength, in vitro release profile, antimicrobial activity and in vivo efficacy in rat model. Cubosomal size (137-450 nm) and entrapment efficacy (74-88%) increases with increase in the level of MO. The in situ gel-cubosomal batches showed sufficient viscosity (878-956 cp), syringeability (125-150N), mucoadhesive strength (25.7-26.2 dyne/cm²), gelation temperature (34.3-35.3^oC), gel strength (45-51 s), and texture profile for periodontal application. The in vitro release profiles showed sustain azithromycin release for 24h from the in situ gel-cubosomal gels compared to 4h from the marketed azithromycin gel. The in vivo studies (alveolar bone loss and histopathology) in rat model confirmed the efficacy of in situ gel to treat periodontitis at low frequency of dosing compared to marketed gel. In conclusion, the study demonstrated the potential of cubosomes to sustain the release of azithromycin from in situ gelling system for effective treatment of periodontitis.

Liquid Crystalline Phases for Enhancement of Oral Bioavailability

Liquid crystalline phases (LCPs) are generated upon lipolysis of ingested lipids in the gastrointestinal tract. The breaking off and subsequent evolution of LCPs produce more advanced vesicular and micellar structures which facilitate oral absorption of lipids, as well as co-loaded drug entities. Owing to sustained or controlled drug release, bioadhesiveness, and capability of loading drugs of different properties, LCPs are promising vehicles to implement for enhancement of oral bioavailability. This review aims to provide an overview on the classification, preparation and characterization, in vivo generation and transformation, absorption mechanisms, and encouraging applications of LCPs in enhancement of oral bioavailability. In addition, we comment on the merits of LCPs as oral drug delivery carriers, as well as solutions to industrialization utilizing liquid crystalline precursor and preconcentrate formulations.

Design and Characterization of Glyceryl Monooleate-Nanostructures Containing Doxorubicin Hydrochloride

Glyceryl monooleate (GMO) is one of the most popular amphiphilic lipids, which, in the presence of different amounts of water and a proper amount of stabilizer, can promote the development of well defined, thermodynamically stable nanostructures, called lyotropic liquid crystal dispersions. The aim of this study is based on the design, characterization, and evaluation of the cytotoxicity of lyotropic liquid crystal nanostructures containing a model anticancer drug such as doxorubicin hydrochloride. The drug is efficiently retained by the GMO nanosystems by a remote loading approach. The nanostructures prepared with different non-ionic surfactants (poloxamers and polysorbates) are characterized by different physico-chemical features as a function of several parameters, i.e., serum stability, temperature, and different pH values, as well as the amount of cryoprotectants used to obtain suitable freeze-dried systems. The nanostructures prepared with poloxamer 407 used as a stabilizer show an increased toxicity of the entrapped drug on breast cancer cell lines (MCF-7 and MDA-MB-231) due to their ability to sensitize multidrug-resistant (MDR) tumor cells through the inhibition of specific drug efflux transporters. Moreover, the interaction between the nanostructures and the cells occurs after just a few hours, evidencing a huge cellular uptake of the nanosystems.

Preparation and Evaluation of Cubic Nanoparticles for Improved Transdermal Delivery of Propranolol Hydrochloride

Transdermal drug delivery of propranolol hydrochloride (PRH) is promising for the treatment of infantile hemangioma (IH). Clinically used PRH hydrogel fails to reach the deep IH for complete recovery. In this study, the PRH-loaded cubic nanoparticles (CNPs) were prepared to promote the transdermal effect of PRH. A remote drug loading method was developed to prepare the PRH-CNPs. For the traditional passive drug loading method, the largest encapsulation efficiency (EE%) was around 50%. The remote drug loading was performed by increasing the pH of the mixture of blank CNPs and PRH solution. The optimal PRH-CNPs showed an EE% of 90.15 ± 2.44% at pH 8.5. The permeation of the PRH solution was poor while the PRH-CNPs showed greatly enhanced skin permeation. It was found that smaller-sized PRH-CNPs contributed to increased skin permeation and retention. In addition, the PRH-CNPs had higher cytotoxicity towards the EOMA cells when compared with the PRH solution. During storage for 1 month, the PRH-CNPs kept stable size distribution, pH, and EE%. In conclusion, results of this study suggested that the PRH-CNPs could be a potential candidate for the treatment of the IH by transdermal delivery.

Theranostic lyotropic liquid crystalline nanostructures for selective breast cancer imaging and therapy

Herein, we report the development of theranostic lyotropic liquid crystalline nanostructures (LCN's) loaded with unique MnO nanoparticles (MNPs) for selective cancer imaging and therapy. MNPs serves as a fluorescent agent as well as a source of manganese (Mn²⁺) and enables localized oxidative stress under the hallmarks of cancer (acidosis, high H₂O₂ level). In pursuit of synergistic amplification of Mn²⁺ antitumor activity, betulinic acid (BA) is loaded in LCN's. In this investigation, nano-architecture of LCN's phase interface is established via SAXS, Cryo-TEM and Cryo-FESEM. Intriguing in vitro studies showed that the LCN's triggered hydroxyl radical production and exhibited greater selective cytotoxicity in cancer cells, ensuring the safety of normal cells. Significant tumor ablation is realized by the 96.5 % of tumor growth inhibition index of LCN's as compared to control group. Key insights into on-site drug release, local anti-cancer response, and tumor location are gained through precise guidance of fluorescent MNPs. In addition, comprehensive assessment of the safety, pharmacokinetics and tumor distribution behavior of LCN's is performed in vivo or ex vivo. This work emphasizes the promise of modulating tumor microenvironment with smart endogenous stimuli sensitive nano systems to achieve advanced comprehensive cancer nano-theranostics without any external stimulus. STATEMENT OF SIGNIFICANCE: Effective diagnosis and treatment approaches with maximum anti-cancer activity and minimal side-effects are critical to ameliorate cancer therapy. Compared to radiation, photodynamic and photothermal therapy, the specific and selective activation of tumor microenvironmental endogenous stimuli for the logical generation of cytotoxic OH^· free radicals serves as an efficient therapeutic strategy for chemodynamic-cancer treatment. In this investigation, MnO nanoparticles fulfill two needs (fluorescence-based optical imaging and a source of Mn²⁺ based chemodynamic therapy) in one unit. This approach also ensures the safety of normal cells, as the toxic OH^· free radical activity is substantially suppressed under the mild alkaline/H₂O₂ conditions in normal cell microenvironment.

Nanosystems against candidiasis: a review of studies performed over the last two decades

The crescent number of cases of candidiasis and the increase in the number of infections developed by non-albicans species and by multi-resistant strains has taken the attention of the scientific community, which has been searching for new therapeutic alternatives. Among the alternatives found the use of nanosystems for delivery of drugs already commercialized and new biomolecules have grown, in order to increase stability, solubility, optimize efficiency and reduce adverse effects. In view of the growing number of studies involving technological alternatives for the treatment of candidiasis, the present review came with the intention of gathering studies from the last two decades that used nanotechnology for the treatment of candidiasis, as well as analysing them critically and pointing out the future perspectives for their application with this purpose. Different studies were considered for the development of this review, addressing nanosystems such as metallic nanoparticles, mesoporous silica nanoparticles, polymeric nanoparticles, liposomes, nanoemulsion, microemulsion, solid lipid nanoparticle, nanostructured lipid carrier, lipidic nanocapsules and liquid crystals; and different clinical presentations of candidiasis. As a general overview, nanotechnology has proven to be an important ally for the treatment against the diversity of candidiasis found in the clinic, whether in increasing the effectiveness of commercialized drugs and reducing their adverse effects, as well as allowing exploring more effectively properties therapeutics of new biomolecules.

pH Responsiveness of Hexosomes and Cubosomes for Combined Delivery of Brucea javanica Oil and Doxorubicin

We report pH-responsive liquid crystalline lipid nanoparticles, which are dual-loaded by Brucea javanica oil (BJO) and doxorubicin hydrochloride (DOX) and display a pH-induced inverted hexagonal (pH = 7.4) to cubic (pH = 6.8) to emulsified microemulsion (pH = 5.3) phase transition with a therapeutic application in cancer inhibition. BJO is a traditional herbal medicine that strongly inhibits the proliferation and metastasis of various cancers. Doxorubicin is an antitumor drug, which prevents DNA replication and hampers protein synthesis through intercalation between the base pairs of the DNA helices. Its dose-dependent cardiotoxicity imposes the need for safe delivery carriers. Here, pH-induced changes in the structural and interfacial properties of designed multicomponent drug delivery (monoolein-oleic acid-BJO-DOX) systems are determined by synchrotron small-angle X-ray scattering and the Langmuir film balance technique. The nanocarrier assemblies display good physical stability in the studied pH range and adequate particle sizes and ζ-potentials. Their interaction with model lipid membrane interfaces is enhanced under acidic pH conditions, which mimic the microenvironment around tumor cells. In vitro cytotoxicity and apoptosis studies with BJO-DOX dual-loaded pH-switchable liquid crystalline nanoparticles are performed on the human breast cancer Michigan Cancer Foundation-7 (MCF-7) cell line and MCF-7 cells with doxorubicin resistance (MCF-7/DOX), respectively. The obtained pH-sensitive nanomedicines exhibit enhanced antitumor efficacy. The performed preliminary studies suggest a potential reversal of the resistance of the MCF-7/DOX cells to DOX. These results highlight the necessity for further understanding the link between the established pH-dependent drug release profiles of the nanocarriers and the role of their pH-switchable inverted hexagonal, bicontinuous cubic, and emulsified microemulsion inner organizations for therapeutic outcomes.

Ultrasound-assisted preparation of different nanocarriers loaded with food bioactive ingredients

Developing green and facile approaches to produce nanostructures suitable for bioactives, nanoencapsulation faces some challenges in the nutraceutical and food bioactive industries due to potential risks arising from nanomaterials fabrication and consumption. High-intensity ultrasound is an effective technology to generate different bio-based structures in sub-micron or nanometer scale. This technique owing to some intrinsic advantages such as safety, straightforward operation, energy efficiency, and scale-up potential, as well as, ability to control over size and morpHology has stood out among various nanosynthetic routes. Ultrasonically-provided energy is mainly transferred to the droplets and particles via acoustic cavitation (which is formation, growth, and implosive collapse of bubbles in solvent). This review provides an outlook on the fundamentals of ultrasonication and some applicable setups in nanoencapsulation. Different kinds of nanostructures based on surfactants, lipids, proteins and carbohydrates formed by sonication, along with their advantages and disadvantages are assessed from the viewpoint of stability, particle size, and process impacts on some functionalities. The gastrointestinal fate and safety issues of ultrasonically prepared nanostructures are also discussed. Sonication, itself or in combination with other encapsulation approaches, alongside biopolymers generate nano-engineered carriers with enough stability, small particle sizes, and a low polydispersity. The nano-sized systems improve techno-functional activities of encapsulated bioactive agents including stability, solubility, dissolution, availability, controlled and targeted release profile in vitro and in vivo plus other bioactive properties such as antioxidant and antimicrobial capacities. Ultrasonically prepared nanocarriers show a great potential in fortifying food products with desired bioactive components, especially for the industrial applications.