The CALIPSO Version 4 Automated Aerosol Classification and Lidar Ratio Selection Algorithm

Analysis of characteristics and changes in three-dimensional spatial and temporal distribution of aerosol types in Central Asia

Atmospheric aerosol types and characteristics have regional and seasonal characteristics mainly due spatial and temporal differences in emission sources and diffuse transport conditions. We explored regional three-dimensional spatial and temporal distribution characteristics of aerosol types in Central Asia from daytime to nighttime by using long-term (2007-2021) CALIPSO lidar measurements. The three results are as follows: (1) Average aerosol optical depth (AOD) values during the 14 years were 0.44 and 0.47 during daytime and nighttime, respectively, with an overall decreasing trend, among which the AOD in spring in the southern border region and in winter in the northern border region showed high values, 0.66 and 0.31 during daytime and 0.69 and 0.33 during nighttime, respectively, and nighttime AOD values were higher than those of daytime, possibly due to the lower signal-to-noise ratio of the CALIPSO during the daytime than during the nighttime. (2) The primary representative aerosol type in the Taklamakan Desert region being pure sand and dust, and more apparent winter-polluted sand and dust exist along the northern slope of the Tianshan Mountains in Xinjiang in winter than in other areas. High-altitude soot mainly existed below 4 km and was primarily concentrated in northern Central Asia, with the highest values (0.016 and 0.003) in summer and winter, respectively, which may be due to different diffusion and transport conditions. (3) Dust aerosols in spring were mainly concentrated in the region of 2-6 km in the Taklamakan Desert area; pure dust particles in summer and fall lifted height diffusion and gradually moved to the northern border region; polluted dust was mainly in northern Xinjiang in fall and winter and spread to northern Central Asia; and the average top height of aerosols in the transmission process reached the top of the troposphere, and transmission height was higher than source area.

Impact of COVID-19 emission reduction on dust aerosols and marine chlorophyll-a concentration

The long-range transport of dust aerosols plays a crucial role in biogeochemical cycling, and dust deposition is an important source of nutrients for marine phytoplankton growth. To study the impact of COVID-19 emission reduction on dust aerosols and marine chlorophyll-a (Chl-a) concentration, we selected two similar dust processes from the COVID-19 period (10-15 March 2020) and the non-COVID-19 period (15-20 March 2019) using the Euclidean distance calculation method in combination with the HYSPLIT model and multiple satellite data. During the non-COVID-19 period, the proportion of dust was 6.68 %, approximately half that of the COVID-19 period. Meanwhile, the proportion of polluted dust during the non-COVID-19 period was 4.95 %, which was more than tenfold compared to the COVID-19 period. Furthermore, noticeable discrepancies in Chl-a concentration were observed between the two periods. In the non-COVID-19 period, the maximum daily deposition of dust aerosols can reach 16.23 mg/m2, resulting in a 39-85 % increase in Chl-a concentration. However, during COVID-19 period, the maximum daily dust deposition can reach 33.33 mg/m2, while the increase in Chl-a concentration was <30 %. This conclusion suggests that reductions in anthropogenic emissions during the COVID-19 period have influenced the nutrient content of dust aerosols, resulting in a lesser impact on Chl-a concentrations in the ocean.

Changing patterns in the highly contributing aerosol types/species across the globe in the past two decades

With the rapidly changing aerosol emissions due to the increase in urbanization, energy consumption, population density, and industrialization in the past two decades across the globe, there is an evolution of different chemical properties of aerosols that are yet not quantified properly. Therefore, a rigorous attempt is made in this study to obtain the long-term changing patterns in the contribution of different aerosol types/species, to the total aerosol loading. This study is carried out only over those regions exhibiting either increasing or decreasing trends in the aerosol optical depth (AOD) parameter on a global scale. Applying the multivariate linear regression trend analysis on Modern-Era Retrospective Analysis for Research and Application version 2 (MERRA-2) aerosol species dataset obtained between 2001 and 2020, we found that despite the overall statistically significant decrease in total columnar AOD trend values over North-Eastern America, and Eastern and Central China regions, an increase in the dust and organic carbon aerosols is observed, respectively. As the uneven vertical distribution of aerosols can alter the direct radiative effects, the extinction profiles of different aerosol types obtained using Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) dataset between 2006 and 2020, are further partitioned, for the first time, based on their presence in different altitudes (i.e., within the atmospheric boundary layer and free-troposphere) as well as measurement timing (i.e., daytime and night-time) regimes. The detailed analysis showed that there exists an overall higher contribution of aerosols persisting in the free troposphere region which in turn can have a long-term effect on climate due to their higher residence time, particularly absorbing aerosols. As the trends are mostly associated with the changes in energy use, regional regulatory policies, and/or changing background meteorology conditions, therefore this study also elaborates on the effectiveness of these factors with the changes obtained in different aerosol species/types over the region.

Investigating changes in atmospheric aerosols properties over the Indo-Gangetic Plain during different phases of COVID-19-induced lockdowns

Impact of COrona VIrus Diseases 2019 (COVID-19) restrictive measures on aerosol optical depth (AOD) and black carbon (BC) concentration is investigated for the western, central, and eastern Indo-Gangetic Plain (IGP) using satellite-based observations. Due to COVID-19-induced lockdown measures, a noticeable decline in AOD and BC concentrations was observed across the IGP when compared to pre-lockdown period of 2020 and the lockdown concurrent period of 2015-2019. During the total lockdown period, a maximum drop in AOD and BC was observed in the central IGP (26.5 % and 10.1 %), followed by western IGP (24.9% and 5.2%) and eastern IGP (23.2 % and 4.9 %) with respect to the same period of 2015-2019. We have removed seasonal influences on aerosol properties during the COVID-19 lockdown, by taking average seasonal variations during the period of 2015-2019 as reference and projecting the hypothetical AOD and BC for the lockdown period under normal scenario. The difference between the hypothetical AOD and BC (under normal scenario) and the retrieved AOD and BC for the lockdown period is the absolute percentage change in AOD and BC concentration due to the lockdown alone. This elimination of seasonal influence is a novel approach. Central IGP showed an absolute decrease in AOD and BC of 38.5% and 18.2% during the lockdown period followed by western IGP (34.6% and 7.7%) and eastern IGP (25.9% and 11.5%). The observed absolute reduction in AOD, 26-39 %, is significantly higher than the global average reduction in AOD of 2-5%. CALIPSO-derived aerosol sub-types over major location of the western, central, and eastern IGP suggests prevalence of anthropogenic activities during pre- and post-lockdown periods. During the lockdown, IGP was influenced by aerosols from natural sources, with mineral dust and polluted dust in the western and central IGP, and aerosols from marine regions in the eastern IGP. Replenishment of aerosols within the boundary layer were far quicker when compared to total column during post-lockdown. Overall, the study reveals a reduction in anthropogenic emissions during the COVID-19-induced lockdowns, leading to temporary improvements in air quality over the IGP. Our study presents a comprehensive analysis of COVID-19 lockdown impact on aerosols properties over the IGP and highlights unprecedented reductions in AOD (~ 40 %) and BC (~ 20 %), due to imposition of lockdown and subsequent cessation of aerosol sources, by removing seasonal influences.

Multi-campaign ship and aircraft observations of marine cloud condensation nuclei and droplet concentrations

In-situ marine cloud droplet number concentrations (CDNCs), cloud condensation nuclei (CCN), and CCN proxies, based on particle sizes and optical properties, are accumulated from seven field campaigns: ACTIVATE; NAAMES; CAMP2EX; ORACLES; SOCRATES; MARCUS; and CAPRICORN2. Each campaign involves aircraft measurements, ship-based measurements, or both. Measurements collected over the North and Central Atlantic, Indo-Pacific, and Southern Oceans, represent a range of clean to polluted conditions in various climate regimes. With the extensive range of environmental conditions sampled, this data collection is ideal for testing satellite remote detection methods of CDNC and CCN in marine environments. Remote measurement methods are vital to expanding the available data in these difficult-to-reach regions of the Earth and improving our understanding of aerosol-cloud interactions. The data collection includes particle composition and continental tracers to identify potential contributing CCN sources. Several of these campaigns include High Spectral Resolution Lidar (HSRL) and polarimetric imaging measurements and retrievals that will be the basis for the next generation of space-based remote sensors and, thus, can be utilized as satellite surrogates.

Theoretical and experimental investigation of the molecular depolarization ratio for broadband polarization lidar techniques

The molecular depolarization ratio (MDR) is of great significance for polarization lidar techniques in terms of validating the measurement accuracy, etc. However, previous studies mainly focused on cases with narrowband laser linewidths, and the transmittance of the Cabannes line in the receiver has been assumed constant. In this work, the narrowband theoretical model of MDR has been re-examined by taking the transmittance of the Cabannes line into account. A large relative deviation of beyond 200% has been found if the wavelength-shift reaches up to 0.5 nm for a receiving bandwidth of 0.5 nm at 532 nm, which is much larger than the case without considering the transmittance of the Cabannes line, i.e., only 15%, reported in previous studies. Besides, a broadband theoretical model has been proposed to evaluate the MDR for polarization lidar using high-power multimode laser diodes as light sources. Simulation studies have revealed that the MDR is highly related to the laser linewidth, the receiving bandwidth, as well as the wavelength-shift between the laser wavelength and the center wavelength of the receiver. The MDR at 520 nm calculated by the broadband theoretical model is about 21% larger than the value evaluated without considering the laser linewidth, when the receiving bandwidth is equivalent to the laser linewidth (e.g., 2 nm). Validation measurements, employing a 520-nm imaging-based polarization lidar with a 3.4-nm laser linewidth and a 10-nm receiving bandwidth, illustrated that the volume depolarization ratio in a clean atmospheric region (0.129±0.0025) was highly consistent with the theoretical MDR (0.132). The good agreement between theoretical and experimental results demonstrated a high measurement accuracy of the imaging-based polarization lidar and excellent feasibility of the broadband theoretical model.

Retrieval uncertainty and consistency of Suomi-NPP VIIRS deep blue and dark target aerosol products under diverse aerosol loading scenarios over South Asia

Retrieval accuracy and stability of two operational aerosol retrieval algorithms, Deep Blue (DB) and Dark Target (DT), applied on Visible Infrared Imaging Radiometer Suite (VIIRS) on-board Suomi National Polar-orbiting Partnership (S-NPP) satellite were evaluated over South Asia. The region is reported to be highly challenging to accurate estimation of satellite-based aerosol optical properties due to variations in surface reflectance, complex aerosol system and regional meteorology. Performance of both algorithms were initially evaluated by comparing their ability to retrieve aerosol signal over the complex geographical region under specific air pollution emission scenario. Thereafter, retrieval accuracy was investigated against 10 AERONET sites across South Asia, selected based on their geography and predominance aerosol types, from year 2012-2021. Geo-spatial analysis indicates DB to efficiently retrieve fine aerosol features over bright arid surfaces, and for smoke/dust dominating events whereas DT was better to identify small fire events under dark vegetated surface. Both algorithms however, indicate unsatisfactory retrieval accuracy against AERONET having 56-59% of valid retrievals with high RMSE (0.30-0.33) and bias. Overall, DB slightly underpredicted AOD with -0.02 mean bias (MB) whereas DT overpredicted AOD (MB: 0.13), with seasonality in their retrieval efficiency against AERONET. Time-series analysis indicates stability in retrieving AOD and match-up number for both algorithms. Retrieval bias of DB and DT AOD against AERONET AOD under diverse aerosol loading, aerosol size, scattering/absorbing aerosol, and surface vegetation coverage scenarios revealed DT to be more influenced by these conditions. Error analysis indicates at low AOD (≤0.2), accuracy of both DB and DT were subject to underlying vegetation coverage. At AOD>0.2, DB performed well in retrieving coarse aerosols whereas DT was superior when fine aerosols dominated. Overall, accuracy of both VIIRS algorithms require further refinement to continue MODIS AOD legacy over South Asia.

Investigation of the chemical nature of precipitation and source apportionment of its constituents in Tehran metropolis, Iran

Precipitation is a key process for purifying the atmosphere of pollutants. However, precipitation chemistry is also a significant environmental catastrophe on a global scale. Tehran Metropolitan Area, Iran's capital, is one of the world's most polluted cities. Nonetheless, little effort has been paid to determining the chemical composition of precipitation in this polluted metropolis. The chemical components and likely sources of trace metals and water-soluble ions in precipitation samples collected from 2021 to 2022 at an urban location in Tehran, Iran, were investigated in this study. The pH of the rainwater samples varied from 6.330 to 7.940 (mean 7.313, volume weighted mean (VWM) 7.523). The following is the order of the VWM concentration of main ions: Ca²⁺ > HCO₃^- > Na⁺ >SO₄^2- > NH₄⁺ > Cl^- > NO₃^- > Mg²⁺> K⁺> F^-. Furthermore, we discovered that VWM concentrations for trace elements are modest, with the exception of Sr (39.104 eq L^-1). The primary neutralizing species for precipitation acidity were Ca²⁺ and NH₄⁺. Vertical feature mask (VFM) diagrams derived from cloud-aerosol lidar and infrared pathfinder satellite observation (CALIPSO) track data indicated that polluted dust was the most common pollutant in the Tehran sky that might contribute significantly to the neutralization of precipitation. A study of species concentration ratios in seawater and the earth's crust indicated that virtually all Se, Sr, Zn, Mg²⁺, NO₃^-, and SO₄^2- were anthropogenic. While Cl^- was largely obtained from sea salt, K⁺ was obtained from both the earth's crust and the sea, with the earth's crust playing a larger role in K⁺. The earth's crust, aged sea salt, industry, and combustion processes were all verified as sources of trace metals and water-soluble ions by positive matrix factorization analysis.

Simultaneous profiling of dust aerosol mass concentration and optical properties with polarized high-spectral-resolution lidar

Dust particles originating from arid desert regions can be transported over long distances, presenting severe risks to climate, environment, social economics, and human health at the source and downwind regions. However, there has been a dearth of continuous diurnal observations of vertically resolved mass concentration and optical properties of dust aerosols, which hinders our understanding of aerosol mixing, stratification, aerosol-cloud interactions, and their impacts on the environment. To fill the gap of the insufficient observations, to the best of our knowledge, this work presents the first high-spectral-resolution lidar (HSRL) observation providing days of continuous profiles of the mass concentration, along with particle linear depolarization ratio (PLDR), backscattering coefficient, extinction coefficient and lidar ratio (LR), simultaneously. We present the results of two strong dust events observed by HSRL over Beijing in 2021. The maximum particle mass concentrations reached (1.52 ± 3.5) x10³ μg/m³ and (19.48 ± 0.36) x10³ μg/m³ for the two dust events, respectively. The retrieved particle mass concentrations and aerosol optical depth (AOD) agree well with the observation from the surface PM₁₀ concentrations and sun photometer with correlation coefficients of 0.90 and 0.95, respectively. The intensive properties of PLDR and LR of the dust aerosols are 0.31 ± 0.02 and 39 ± 7 sr at 532 nm, respectively, which are generally close to those obtained from observations in the downwind areas. Moreover, inspired by the observations from HSRL, a universal analytical relationship is discovered to evaluate the proportion of dust aerosol backscattering, extinction, AOD, and mass concentration using PLDR. The universal analytical relationship reveals that PLDR can directly quantify dust aerosol contribution, which is expected to further expand the application of polarization technology in dust detection. These valuable observations and findings further our understanding of the contribution of dust aerosol to the environment and help supplement dust aerosol databases.

Variations and drivers of aerosol vertical characterization after clean air policy in China based on 7-years consecutive observations

Understanding the aerosol vertical characterization is of great importance to both climate and atmospheric environment. This study investigated the variations of aerosol profiles over eight regions of interest in China after clean air policy (2013-2019) and discussed the drivers of the vertical aerosol structure, using observations from active satellite measurements (CALIPSO). From the annual variation, the amplitude of extinction coefficient profiles showed a decreasing trend with fluctuations, and the maximum was 0.21 km^-1 in Beijing-Tianjin-Hebei (JJJ). For regions suffered from air pollution, the variation was greatest below 0.45 km, while it was between 1-1.5 km for Sichuan Basin. The correlation coefficient between the relative humidity (RH) and the extinction coefficient indicated that the increase of RH inhibited the decrease of the extinction coefficient in the Yangtze River Delta. In most regions, the main aerosol subtypes were polluted dust and polluted continental, but they were coarser in JJJ and North West. The frequency of concurrency of dust and polluted dust aerosols decreased in JJJ, but polluted continental aerosols occurred more frequently. Further, the aerosol extinction coefficient profiles under different pollution conditions showed that it changed most during heavy pollution periods in JJJ, especially in 2017, with a significant aerosol loading between ∼700 and 1200 m. The atmospheric reanalysis data revealed that the weak convergence at low level and the divergence at high level supported the upward transport of aerosols in 2017. Overall, the differences in divergence allocation, RH, and wind filed were the main meteorological drivers.

Stratospheric aerosol lidar with a 300 µm diameter superconducting nanowire single-photon detector at 1064 nm

Stratospheric aerosols play an important role in the atmospheric chemical and radiative balance. To detect the stratospheric aerosol layer, a 1064 nm lidar with high resolution and large dynamic range is developed using a superconducting nanowire single-photon detector (SNSPD). Measurements are typically performed at 1064 nm for its sensitivity to aerosol, whereas detectors are limited by low efficiency and high dark count rate (DCR). SNSPDs are characterized by high efficiency in the infrared wavelength domain, as well as low noise and dead time, which can significantly enhance the signal quality. However, it is still challenging to build an SNSPD with both large active area and high count rate. To improve the maximal count rate (MCR) so as to avoid saturation in the near range, a 16-pixel interleaved SNSPD array and a multichannel data acquisition system are developed. As a reference, a synchronous system working at 532 nm is applied. In a continuous comparison experiment, backscatter ratio profiles are retrieved with resolutions of 90 m/3 min, and the 1064 nm system shows better performance, which is sensitive to aerosols and immune to the contamination of the ozone absorption and density of molecule change in the lower stratosphere.

Seasonal cycles and long-term trends of arctic tropospheric aerosols based on CALIPSO lidar observations

Notable warming trends have been observed in the Arctic, with tropospheric aerosols being one of the key drivers. Here the seasonal cycles of three-dimensional (3D) distributions of aerosol extinction coefficients (AECs) and frequency of occurrences (FoOs) for different aerosol subtypes in the troposphere over the Arctic from 2007 to 2019 are characterized capitalizing on Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) Level-3 gridded aerosol profile product. Seasonal contributions of total and type-dependent aerosols through their partitioning within the planetary boundary layer (PBL) and free troposphere (FT) are also quantified utilizing the Modern-Era Retrospective Analysis for Research and Applications, version 2 (MERRA-2) PBL height data. The results show substantial seasonal and geographical dependence in the distribution of aerosols over the Arctic. Sulfate, black carbon (BC), and organic carbon (OC) contribute most of the total AEC, with Eurasia being the largest contributor. The vertical structure of AECs and FoOs over the Arctic demonstrates that the vertical influence of aerosols is higher in eastern Siberia and North America than in northern Eurasia and its coasts. When the total aerosol optical depth (TAOD) is partitioned into the PBL and FT, results indicate that the contributions of TAOD within the FT tend to be more significant, especially in summer, with the FT contributes 64.2% and 69.2% of TAOD over the lower (i.e., 60° N-70° N) and high (i.e., north of 70° N) Arctic, respectively. Additionally, seasonal trend analyses suggest Arctic TAOD exhibits a multi-year negative trend in winter, spring, and autumn and a positive trend in summer during 2007-2019, due to an overall decrease in sulfate from weakened anthropogenic emissions and a significant increase in BC and OC from enhanced biomass burning activities. Overall, this study has potential implications for understanding the seasonal cycles and trends in Arctic aerosols.

Identifying Seasonal and Diurnal Variations and the Most Frequently Impacted Zone of Aerosols in the Aral Sea Region

With the desiccation of the Aral Sea, salt-alkali dust storms have increased in frequency and the surrounding environment has deteriorated. In order to increase our understanding of the characteristics and potential impact zone of atmospheric aerosols in the Aral Sea region, we evaluated seasonal and diurnal variation of aerosols and identified the zone most frequently impacted by aerosols from the Aral Sea region using CALIPSO data and the HYSPLIT model. The results showed that polluted dust and dust were the two most commonly observed aerosol subtypes in the Aral Sea region with the two accounting for over 75% of observed aerosols. Occurrence frequencies of polluted dust, clean continental, polluted continental/smoke, and elevated smoke showed obvious seasonal and diurnal variations, while occurrence frequency of dust only showed obvious seasonal variation. Vertically, the occurrence frequencies of all aerosol subtypes except dust showed significant diurnal variation at all levels. The thickness of polluted dust layers and dust layers exhibited same seasonal and diurnal variations with a value of more than 1.0 km year-round, and the layer thickness of clean continental and polluted continental/smoke shared the same seasonal and diurnal variation features. The zone most severely impacted by aerosols from the Aral Sea region, covering an area of approximately 2 million km2, was mainly distributed in the vicinity of the Aral Sea region, including western Kazakhstan, and most of Uzbekistan and Turkmenistan. The results provide direct support for positioning monitoring of aeolian dust deposition and human health protection in the Aral Sea region.

Three-dimensional nature of summertime aerosols over South Asia

Three-dimensional (temporal-spatial-vertical) climatology of South Asian summertime (MAMJ, 2010-2019) aerosols and aerosol sub-types was explored using multiple high-resolution satellite-based observations and reanalysis dataset. Vertical stratification of aerosol layer and aerosol sub-types was identified using observation from space-borne lidar. Aerosol optical depth (AOD) was particularly high across the Indo-Gangetic Plain (IGP; AOD ± SD: 0.56 ± 0.12) and over eastern coast of India (AOD: 0.6-0.8), with prevalence of heterogeneous aerosol sub-types having strong spatial gradient. Clearly, aerosols over north-western arid part were highly absorbing (Ultra-violet Aerosol Index, UVAI > 0.80) and coarse (Ångström exponent, AE < 0.8), with an indication of desert/-mineral dust aerosols. In contrast, fine and moderate to non-absorbing aerosols (UVAI: 0.20-0.50) dominate from central to lower IGP, including in Bangladesh, with signature of anthropogenic emissions. Prevailing aerosols over twelve South Asian cities were classified into six aerosol sub-types constraining their particle size and UV-absorbing potential. Overall, mineral dust, smoke and urban aerosols were the three major aerosol sub-types that prevail across South Asia during summer. In particular, 58-70 % of retrieval days over Karachi and Multan were dust dominated; 57-64 % days were dust or urban aerosols dominated over Lahore, Delhi, Kanpur and Varanasi, and 56-77 % days were smoke or urban aerosols dominated over Dhaka, Kathmandu, Chennai, Mumbai, Colombo and Nagpur. Prevailing aerosols were vertically stratified as 50-70 % of total AOD was retrieved <2 km from the surface except in few cities where 70-80 % of AOD was retrieved <3 km height. Mineral dust and/or urban aerosols emerged as the most abundant aerosol types near the surface (<1 km) in all the cities except in Chennai, with their abundance remained as a function of emission sources and geographical location.

Vertical stratification of aerosols over South Asian cities

This study examines vertically resolved aerosol optical properties retrieved from Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) onboard CALIPSO satellite over several cities across South Asia from March 2010 to February 2021. Atmospheric layer-specific stratification of aerosols and dominant aerosol sub-types was recognized over each city with their seasonal trends. A contrasting pattern in aerosol vertical distribution over cities across Indo-Gangetic Plain (IGP) was noted compared to non-IGP cities, with considerable dependency on geographic location of the city itself. In all the cases, total extinction decreased with increasing altitude however, with varying degree of slope. A clear intrusion of transported aerosols at higher altitude (>3 km) was also evident. Extinction coefficient of type-separated aerosols indicate robust contribution of smoke aerosols, urban aerosols/polluted dust, and mineral dust below 3 km height. At higher altitude (>3 km), dust and urban aerosols dominate over majority of the stations. Overall, 51% of total columnar aerosols remained within 0-1 km height over South Asian cities, slightly high over the IGP (57%) against non-IGP cities (39%). Such distribution also has a seasonal pattern with higher fraction of aerosols remaining below 1 km during post-monsoon (October-November, 62%) and winter (December-February, 72%) compared to summer months (March-May, 39%). When partitioned against planetary boundary layer (PBL), 41% (59%) of aerosols remained within the PBL (free troposphere) that too exhibiting strong diurnal variations irrespective of seasons. Dominating aerosol types and their contribution to total aerosol loading was explored by comparing type-based aerosol extinction against total aerosol extinction. Dust, smoke and urban aerosols emerged as three predominating aerosol types, while presence of marine aerosol was noted over the coastal cities. Major fraction of smoke and urban aerosols remained within 2 km height from surface. In contrast, efficient transport of dust aerosol above 2 km height was evident particularly over IGP during summer.

Assessment of PM2.5 using satellite lidar observations: Effect of bio-mass burning emissions over India

The present study estimates the particulate matter with aerodynamic diameters less than 2.5 μm (PM_2.5) over the Indian sub-continent using near-surface retrieval of aerosol extinction coefficient (2007-2021) of Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) onboard Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) satellite. Climatology of wintertime PM_2.5 during the last 15 years shows the highest concentration over the middle Indo-Gangetic Plain (IGP) and northwest India with a 3 to 4 fold increase in magnitude compared to the peninsular India. Surface-level PM_2.5 mass concentration during winter (December to February) shows statistically significant positive trends over the Indian subcontinent. It increases at a rate of ~3% over the IGP and arid regions of northwest India, and ~4% over peninsular India during the last fifteen years (2006-2020). Interannual variability of average near-surface PM_2.5 concentration over the Indian sub-continent during the fog occurring season (December to February) shows a statistically significant correlation with the post-harvest agro-residue burning over the western IGP (Punjab and Haryana) during November. The wintertime near-surface PM_2.5 concentration shows a higher correlation with anthropogenic agro-residue burning activity compared to meteorological parameters. The influence of agro-residue burning during November over northern India extends up to peninsular India and might contribute to continental pollution outflow and associated aerosol plumes persisting over the Northern Indian Ocean during the winter season. Sustainable energy recovery solutions to the agro-residue burning need to be implemented to effectively reduce the far-reaching implications of the post-monsoon burning activity over the western IGP.

Visible, near-infrared dual-polarization lidar based on polarization cameras: system design, evaluation and atmospheric measurements

A visible, near-infrared (VIS-NIR) dual-polarization lidar technique employing laser diodes and polarization cameras has been designed and implemented for all-day unattended field measurements of atmospheric aerosols. The linear volume depolarization ratios (LVDR) and the offset angles can be retrieved from four-directional polarized backscattering signals at wavelengths of 458 nm and 808 nm without additional optical components and sophisticated system adjustments. Evaluations on the polarization crosstalk of the polarization camera and the offset angle have been performed in detail. A rotating linear polarizer (RLP) method based on the Stokes-Mueller formalism has been proposed and demonstrated for measuring extinction ratios of the polarization camera, which can be used to eliminate the polarization crosstalk between different polarization signals. The offset angles can be online measured with a precision of 0.1°, leading to negligible measurement errors on the LVDR. One-month statistical analysis revealed a small temporal variation of the offset angles, namely -0.13°±0.07° at 458 nm and 0.33°±0.09° at 808 nm, indicating good system stability for long-term measurement. Atmospheric measurements have been carried out to verify the system performance and investigate aerosol optical properties. The spectral characteristics of the aerosol extinction coefficient, the color ratio, the linear particle polarization ratio (LPDR) and the ratio of LPDR were retrieved and evaluated based on one-month continuous atmospheric measurements, from which different types of aerosols can be classified. The promising results showed great potential of employing the VIS-NIR dual-polarization lidar in characterizing aerosol optical properties, discriminating aerosol types and analyzing long-range aerosol transportation.

Assessment of CALIOP-Derived CCN Concentrations by In Situ Surface Measurements

The satellite-based cloud condensation nuclei (CCN) proxies used to quantify the aerosol-cloud interactions (ACIs) are column integrated and do not guarantee the vertical co-location of aerosols and clouds. This has encouraged the use of height-resolved measurements of spaceborne lidars for ACI studies and led to advancements in lidar-based CCN retrieval algorithms. In this study, we present a comparison between the number concentration of CCN (nCCN) derived from ground-based in situ and spaceborne lidar cloud-aerosol lidar with orthogonal polarization (CALIOP) measurements. On analysing their monthly time series, we found that about 88% of CALIOP nCCN estimates remained within a factor of 1.5 of the in situ measurements. Overall, the CALIOP estimates of monthly nCCN were in good agreement with the in situ measurements with a normalized mean error of 71%, normalized mean bias of 39% and correlation coefficient of 0.68. Based on our comparison results, we point out the necessary measures that should be considered for global nCCN retrieval. Our results show the competence of CALIOP in compiling a global height- and type-resolved nCCN dataset for use in ACI studies.

Insights into Variations and Potential Long-Range Transport of Atmospheric Aerosols from the Aral Sea Basin in Central Asia

The dramatic shrinkage of the Aral Sea in the past decades has inevitably led to an environmental calamity. Existing knowledge on the variations and potential transport of atmospheric aerosols from the Aral Sea Basin (ASB) is limited. To bridge this knowledge gap, this study tried to identify the variations and long-range transport of atmospheric aerosols from the ASB in recent years. The Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) model and Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) data were used to gain new insight into the types, variation and long-range transport of atmospheric aerosols from the ASB. The results showed five types of tropospheric aerosols and one type of stratospheric aerosol were observed over the ASB. Polluted dust and dust were the dominant subtypes through the year. Sulfate/other was the only stratospheric aerosol detected. The occurrence frequency of aerosols over the ASB showed obvious seasonal variation. Maximum occurrence frequency of dust appeared in spring (MAM) and that of polluted dust peaked in summer (JJA). The monthly occurrence frequency of dust and polluted dust exhibited unimodal distribution. Polluted dust and dust were distributed over wide ranges from 1 km to 5 km vertically. The multi-year average thickness of polluted dust and dust layers was around 1.3 km. Their potential long-range transport in different directions mainly impacts Uzbekistan, Turkmenistan, Kazakhstan and eastern Iran, and may reach as far as the Caucasus region, part of China, Mongolia and Russia. Combining aerosol lidar, atmospheric climate models and geochemical methods is strongly suggested to gain clarity on the variations and long-range transport of atmospheric aerosols from the Aral Sea Basin.

Sea Salt Aerosol Identification Based on Multispectral Optical Properties and Its Impact on Radiative Forcing over the Ocean

The ground-based measurement of sea salt (SS) aerosol over the ocean requires the massive utilization of satellite-derived aerosol products. In this study, n-order spectral derivatives of aerosol optical depth (AOD) based on wavelength were examined to characterize SS and other aerosol types in terms of their spectral dependence related to their optical properties such as particle size distributions and complex refractive indices. Based on theoretical simulations from the second simulation of a satellite signal in the solar spectrum (6S) model, AOD spectral derivatives of SS were characterized along with other major types including mineral dust (DS), biomass burning (BB), and anthropogenic pollutants (APs). The approach (normalized derivative aerosol index, NDAI) of partitioning aerosol types with intrinsic values of particle size distribution and complex refractive index from normalized first- and second-order derivatives was applied to the datasets from a moderate resolution imaging spectroradiometer (MODIS) as well as by the ground-based aerosol robotic network (AERONET). The results after implementation from multiple sources of data indicated that the proposed approach could be highly effective for identifying and segregating abundant SS from DS, BB, and AP, across an ocean. Consequently, each aerosol’s shortwave radiative forcing and its efficiency could be further estimated in order to predict its impact on the climate.

Australian Bushfires (2019–2020): Aerosol Optical Properties and Radiative Forcing

In the present study, we present the aerosol optical properties and radiative forcing (RF) of the tropospheric and stratospheric smoke layers, observed by the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) satellite, during the extraordinary Australian biomass burning (BB) event in 2019–2020. These BB layers were studied and analyzed within the longitude range 140° E–20° W and the latitude band 20°–60° S, as they were gradually transported from the Australian banks to the South American continent. These layers were found to be trapped within the Andes circulation, staying for longer time periods in the same longitude region. The BB aerosols reached altitudes even up to 22 km amsl., and regarding their optical properties, they were found to be nearly spherical (particle linear depolarization ratio (PLDR) < 0.10) in the troposphere; while, in the stratosphere, they were more depolarizing with PLDR values reaching up to 0.20. Fine and ultrafine smoke particles were dominant in the stratosphere, according to the observed Ångström exponent, related to the backscatter coefficients obtained by the pair of wavelengths 532 and 1064 nm (Åb up to 3), in contrast to the Åb values in the troposphere (Åb < 1) indicative of the presence of coarser particles. As the aerosols fend off the source, towards North America, a slightly descending trend was observed in the tropospheric Åb values, while the stratospheric ones were lightly increased. A maximum aerosol optical depth (AOD) value of 0.54 was recorded in the lower troposphere over the fire spots, while, in the stratosphere, AOD values up to 0.29 were observed. Sharp changes of carbon monoxide (CO) and ozone (O3) concentrations were also recorded by the Copernicus Atmosphere Monitoring Service (CAMS) in various atmospheric heights over the study region, associated with fire smoke emissions. The tropospheric smoke layers were found to have a negative mean radiative effect, ranging from −12.83 W/m2 at the top of the atmosphere (TOA), to −32.22 W/m2 on the surface (SRF), while the radiative effect of the stratospheric smoke was estimated between −7.36 at the TOA to −18.51 W/m2 at the SRF.

On the net primary productivity over the Arabian Sea due to the reduction in mineral dust deposition

The dust plume tracks from the Middle East and Eastern Africa to the Indian subcontinent have an impact on the atmospheric and ocean biogeochemistry of the Arabian Sea (AS). Here, we present the impact of dust on net primary productivity (NPP) over the AS using satellite-based observation and model simulation. Seasonal episodes and long-term trends in dust optical depth (DOD), dust mass flux (DMF) and dust deposition flux (DDF) from 2007 to 2020 are quantified. Nearly 32% of the total dust is advected to the AS during transport (maximum in JJA; DMF ~ 33.1 Tg year⁻¹ ~ 56% of annual and DDF ~ 5.5 Tg year⁻¹ ~ 63% of annual). Over the last one and half decades, there has been a statistically significant decreasing trend in DOD, associated with precipitation, enhanced vegetation index and surface soil moisture over the landmasses in the proximity of the AS. Similarly, the depletion in DDF suppresses the NPP over different regions of the AS, especially over the central AS, where the oceanic supply of nutrients is limited.

Dust Climatology of Turkey as a Part of the Eastern Mediterranean Basin via 9-Year CALIPSO-Derived Product

Turkey is located in the heart of complex transition geography between Eurasia and the Middle East. In the grand scheme, the so-called eastern Mediterranean Basin is located almost in the middle of the dusty belt, and is a hot spot of climate change. The downstream location of dust-carrying winds from close desert sources reveals Turkey as an open plane to particulate matter exposure throughout the year. In order to clarify this phenomenon, this paper aims to determine the desert dust climatology of Turkey via CALIPSO onboard Lidar. This prominent instrument enables us to understand clouds, aerosols and their types, and related climatic systems, with its valuable products. In this study, a 9-year CALIPSO-derived pure dust product dataset was formed to explain horizontal and vertical distributions, transport heights and case incidences. The results indicated that the pure dust extinction coefficient increased as the location shifted from west to east. Moreover, in the same direction of west to east, the dominant spring months changed to summer and autumn. Mountain range systems surrounding Anatolia were the main obstacles against lofted and buoyant dust particles travelling to northern latitudes. Even if high ridges accumulated mass load on the southern slopes, they also enabled elevated particles to reach the ground level of the inner cities.

First Lidar Campaign in the Industrial Sites of Volta Redonda-RJ and Lorena-SP, Brazil

We report on the first aerosol profiling campaign in the Paraíba valley, a hub connecting the region between the two largest Brazilian metropolitan areas, São Paulo and Rio de Janeiro. São Paulo Sanitation Technology Company (CETESB) air quality and Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) data show homogeneous behavior of the atmosphere throughout the region. A more detailed description of the particulate material in the local atmosphere, including its temporal dependence, can be obtained by using ground-based lidars. Measurements were carried out with a backscatter lidar system in two industrial cities, Volta Redonda and Lorena. The aerosol backscatter profiles present several peaks at different altitudes, indicating the presence of aerosol in several atmospheric layers. In addition, The Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) air-mass back-trajectories indicate a possible detection of long-range aerosol transported from biomass burning areas of South America. The present study emphasizes the importance of investigating and monitoring the emission of particulate matter at this important hub connection between two dense populated regions of Brazil.

Impact of Aerosol Mixing State and Hygroscopicity on the Lidar Ratio

The lidar ratio (LR) is a key parameter for the retrieval of atmospheric optical parameters from lidar equations. In this study, we simulated the optical parameters to investigate the impact factors of the LR using a three-component optical aerosol assumption based on the Mie model. The simulated LR was generally related to the overall particle size of the aerosols, the proportion of elemental carbon (EC), as well as aerosol mixing states and hygroscopicity. The LR was positively correlated with the particle size and volume fraction of elemental carbon (fEC). The LR increased more than three-fold with the increase in fEC from 0% to 40%. The LR of the core-shell (CS) mixing state and homogeneously internal (INT) mixing state was greater than that of the external (EXT) mixing state. The LR of all mixing states increased monotonically with hygroscopicity when the fEC was below 10%, while the LR of the core-shell mixing state (homogeneously internal mixing state) initially decreased (increased) and then increased (decreased) with increasing hygroscopicity when the fEC was more than 20%. These results will help in selecting a reasonable LR for practical applications.

CALIOP-Based Quantification of Central Asian Dust Transport

Central Asia is one of the most important sources of mineral saline dust worldwide. A comprehensive understanding of Central Asian dust transport is essential for evaluating its impacts on human health, ecological safety, weather and climate. This study first puts forward an observation-based climatology of Central Asian dust transport flux by using the 3-D dust detection of Cloud-Aerosol LiDAR with Orthogonal Polarization (CALIOP). The seasonal difference of transport flux and downstream contribution are evaluated and compared with those of the Modern-Era Retrospective Analysis for Research and Applications, version 2 (MERRA-2). Central Asian dust can be transported not only southward in summer under the effect of the South Asian summer monsoon, but also eastward in other seasons under the control of the westerly jet. Additionally, the transport of Central Asian dust across the Pamir Plateau to the Tibetan Plateau is also non-negligible, especially during spring (with a transport flux rate of 150 kg m−1 day−1). The annual CALIOP-based downstream contribution of Central Asian dust to South Asian (164.01 Tg) is 2.1 times that to East Asia (78.36 Tg). This can be attributed to the blocking effect of the higher terrain between Central and East Asia. Additionally, the downstream contributions to South and East Asia from MERRA-2 are only 0.36 and 0.84 times that of CALIOP, respectively. This difference implies the overestimation of the wet and dry depositions of the model, especially in the low latitude zone. The quantification of the Central Asian dust transport allows a better understanding of the Central Asian dust cycle, and supports the calibration/validation of aerosol-related modules of regional and global climate models.

Smoke Injection Heights from Forest and Grassland Fires in Southwest China Observed by CALIPSO

Smoke injection height (SIH) determines the distance and direction of smoke transport, thus impacting the atmospheric environment. In this study, we used Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations data coupled with Moderate Resolution Imaging Spectroradiometer (MODIS) data and the Hybrid Single-Particle Lagrangian Integrated Trajectory model to derive the SIH values during the peak forest and grassland fire seasons from 2012 to 2017 in Southwest China. The results suggest that the SIH values ranged from 2500 m to 2890 m. An analysis of the dependence of SIH on fire characteristics revealed no obvious correlation between SIH and fire radiative power (FRP) because other factors in addition to FRP have an important impact on SIH. Moreover, MODIS FRP data has a drawback in representing the energy released by real fires, also leading to this result. The topographic variables of forest and grassland fires in Southwest China are very different. Complex topography affects SIH by affecting fire intensity and interactions with wind. A comparison of the SIHs with boundary layer height reveals that 75% of the SIHs are above the boundary layer. Compared with other areas, a higher percentage of free troposphere injection occurs in Southwest China, indicating that smoke can cause air pollution over large ranges. Our work provides a better understanding of the transport and vertical distribution of smoke in Southwest China.

Lidar Ratio-Depolarization Ratio Relations of Atmospheric Dust Aerosols: The Super-Spheroid Model and High Spectral Resolution Lidar Observations

The backscattering optical properties of an ensemble of randomly oriented dust particles at a wavelength of 355 nm were comprehensively studied by examining the invariant imbedding T-matrix results of the super-spheroid dust model. In particular, we focused on the lidar ratio ( S ) and depolarization ratio ( δ ) relations of dust aerosols to aid interpretation of data from the Atmospheric Lidar (ATLID) instrument that will be onboard the Earth Cloud, Aerosol and Radiation Explorer (EarthCARE) satellite. Super-spheroid models with various aspect ratios ( α ), roundness parameters ( n ) , and refractive indices were investigated over a wide range of particle sizes and compared to the observation data of the National Aeronautics and Space Administration (NASA) Langley 355-nm airborne high spectral resolution lidar. We found that super-spheroid dust particles with different sets of n and α could be used to model almost the entire range of the observed joint distributions of S and δ . The S - δ relation could effectively discriminate among dust particle types. The observed S and δ values with the largest population density were best covered by models with n > 2, especially by those with n varying from 2.4 to 3.0.

Effect of Aerosol Vertical Distribution on the Modeling of Solar Radiation

Default aerosol extinction coefficient profiles are commonly used instead of measured profiles in radiative transfer modeling, increasing the uncertainties in the simulations. The present study aimed to determine the magnitude of these uncertainties and contribute towards the understanding of the complex interactions between aerosols and solar radiation. Default, artificial and measured profiles of the aerosol extinction coefficient were used to simulate the profiles of different radiometric quantities in the atmosphere for different surface, atmospheric, and aerosol properties and for four spectral bands: ultraviolet-B, ultraviolet-A, visible, and near-infrared. Case studies were performed over different areas in Europe and North Africa. Analysis of the results showed that under cloudless skies, changing the altitude of an artificial aerosol layer has minor impact on the levels of shortwave radiation at the top and bottom of the atmosphere, even for high aerosol loads. Differences of up to 30% were, however, detected for individual spectral bands. Using measured instead of default profiles for the simulations led to more significant differences in the atmosphere, which became very large during dust episodes (10–60% for actinic flux at altitudes between 1 and 2 km, and up to 15 K/day for heating rates depending on the site and solar elevation).

Long-term variations in aerosol optical properties, types, and radiative forcing in the Sichuan Basin, Southwest China

Long-term variations in aerosol optical properties, types, and radiative forcing over the Sichuan Basin (SCB) and surrounding regions in Southwest China were investigated based on two-decade data (2001-2020) from the Moderate Resolution Imaging Spectroradiometer, Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation, and the Santa Barbara DISORT Atmospheric Radiative Transfer model. The results showed that the aerosol optical depth (AOD_550nm) in the SCB, a major polluted region in Southwest China, experienced an increasing tendency at a rate of +0.052 yr^-1 during 2001-2006; thereafter, it decreased speedy up from -0.020 to -0.058 yr^-1 over recent years, whereas the interannual variation in Ångström exponent (AE_470-660nm) presented a persistently increasing trend during 2001-2020, with a rate of +0.014 yr^-1. An improved atmospheric environment but an enhanced fine particle contribution to regional aerosols in the SCB was observed. Over the polluted SCB region, the dominant aerosol types were biomass burning/urban industrial and mixed-type aerosols with the proportions of 80.7%-87.5% in regional aerosols, with a higher frequency of clean aerosols in recent years, reflecting an effect of controlling anthropogenic emission in the SCB owing to governmental regulation. By contrast, few changes were observed in the aerosol types and amounts in the eastern Tibetan Plateau (ETP), where clean continental aerosols dominate with high proportion of 93.7% in the clean atmospheric environment. A significant decline in polluted anthropogenic aerosols was observed below 3 km over the SCB, resulting in the regional aerosol extinction coefficients at 532 nm (EC_532nm) were declined by -0.22 km^-1 from 2013 to 2020. Notably, the decreases in aerosol radiative forcing within the atmosphere were found in the SCB and the adjacent northern Yunnan-Guizhou Plateau (NYGP) and ETP, with -41.6%, -33.7%, and -13.6%, respectively during 2013-2020. This indicates that such an attenuated aerosol heating rate in the atmosphere, caused by aerosol variation, could alter the atmospheric thermal structure over the SCB and surrounding areas for regional changes of environment and climate in recent years.

Capture of decline in spring phytoplankton biomass derived from COVID-19 lockdown effect in the Yellow Sea offshore waters

The Yellow Sea, characterized as a high-productivity ecosystem, is considered to be significantly attributable to high nutrient supply via atmospheric deposition. We observed a significant decline in phytoplankton biomass (~30%) over the Yellow Sea during February-May 2020 (period of COVID-19 lockdown effect) compared to the same period in 2015-2019 (period of no effect of COVID-19 lockdown). Several possible factors, such as variations in irradiance, vertical mixing, and river discharges, were not major contributors. Through the analysis of transportation and the constituents of atmospheric pollutants from Northern China (main source regions) to the Yellow Sea, we suggest that the decline in phytoplankton biomass over the Yellow Sea is mainly attributed to decreased atmospheric nutrient deposition due to the COVID-19 lockdown effect, because of decreased anthropogenic emissions in Northern China. Thus, attention should be focused on the Yellow Sea ecosystem response to increasing anthropogenic activities by lifting the COVID-19 lockdown restrictions.

Development of an all-day portable polarization lidar system based on the division-of-focal-plane scheme for atmospheric polarization measurements

A portable polarization lidar system based on the division-of-focal-plane scheme has been proposed for all-day accurate retrieval of the atmospheric depolarization ratio. The polarization lidar system has been designed as a T-shaped architecture consisting of a closed transmitter and a detachable large focal receiver, which is capable of outdoor unmanned measurements. The lidar system features low cost, low maintenance and short blind range (∼100 m) by utilizing a 450 nm multimode laser diode as the light source and a polarization image sensor with four polarized channels as the detector. Validation measurements have been carried out on a near horizontal path in ten consecutive days. The linear volume depolarization ratio (LVDR) as well as its measurement uncertainty has been theoretically and experimentally evaluated without employing additional optical components and sophisticated online calibrations. The offset angle can also be accurately retrieved (i.e., -0.06°) from the four-directional polarized lidar profiles with a standard deviation of ±0.02° during the whole measurement period, which contributes negligible influence on the retrieval of the LVDR. It has been found out that the uncertainty of the LVDR was mainly originated from the random noise, which was below 0.004 at nighttime and may reach up to 0.008 during daytime owing to the increasing sunlight background. The performance of the polarization lidar system has been further examined through atmospheric vertical measurements. The low-cost low-maintenance portable polarization lidar system, capable of detecting four-directional polarized lidar signals simultaneously, opens up many possibilities for all-day field measurements of dust, cloud, urban aerosol, oriented particles, etc.

Biomass Burning Over the United States East Coast and Western North Atlantic Ocean: Implications for Clouds and Air Quality

Biomass burning (BB) aerosol events were characterized over the U.S. East Coast and Bermuda over the western North Atlantic Ocean (WNAO) between 2005 and 2018 using a combination of ground-based observations, satellite data, and model outputs. Days with BB influence in an atmospheric column (BB days) were identified using criteria biased toward larger fire events based on anomalously high AERONET aerosol optical depth (AOD) and MERRA-2 black carbon (BC) column density. BB days are present year-round with more in June-August (JJA) over the northern part of the East Coast, in contrast to more frequent events in March-May (MAM) over the southeast U.S. and Bermuda. BB source regions in MAM are southern Mexico and by the Yucatan, Central America, and the southeast U.S. JJA source regions are western parts of North America. Less than half of the BB days coincide with anomalously high PM2.5 levels in the surface layer, according to data from 14 IMPROVE sites over the East Coast. Profiles of aerosol extinction suggest that BB particles can be found in the boundary layer and into the upper troposphere with the potential to interact with clouds. Higher cloud drop number concentration and lower drop effective radius are observed during BB days. In addition, lower liquid water path is found during these days, especially when BB particles are present in the boundary layer. While patterns are suggestive of cloud-BB aerosol interactions over the East Coast and the WNAO, additional studies are needed for confirmation.

The New Volcanic Ash Satellite Retrieval VACOS Using MSG/SEVIRI and Artificial Neural Networks: 2. Validation

Volcanic ash clouds can damage aircrafts during flight and, thus, have the potential to disrupt air traffic on a large scale, making their detection and monitoring necessary. The new retrieval algorithm VACOS (Volcanic Ash Cloud properties Obtained from SEVIRI) using the geostationary instrument MSG/SEVIRI and artificial neural networks is introduced in a companion paper. It performs pixelwise classifications and retrieves (indirectly) the mass column concentration, the cloud top height and the effective particle radius. VACOS is comprehensively validated using simulated test data, CALIOP retrievals, lidar and in situ data from aircraft campaigns of the DLR and the FAAM, as well as volcanic ash transport and dispersion multi model multi source term ensemble predictions. Specifically, emissions of the eruptions of Eyjafjallajökull (2010) and Puyehue-Cordón Caulle (2011) are considered. For ash loads larger than 0.2 g m−2 and a mass column concentration-based detection procedure, the different evaluations give probabilities of detection between 70% and more than 90% at false alarm rates of the order of 0.3–3%. For the simulated test data, the retrieval of the mass load has a mean absolute percentage error of ~40% or less for ash layers with an optical thickness at 10.8 μm of 0.1 (i.e., a mass load of about 0.3–0.7 g m−2, depending on the ash type) or more, the ash cloud top height has an error of up to 10% for ash layers above 5 km, and the effective radius has an error of up to 35% for radii of 0.6–6 μm. The retrieval error increases with decreasing ash cloud thickness and top height. VACOS is applicable even for overlaying meteorological clouds, for example, the mean absolute percentage error of the optical depth at 10.8 μm increases by only up to ~30%. Viewing zenith angles >60° increase the mean percentage error by up to ~20%. Desert surfaces are another source of error. Varying geometrical ash layer thicknesses and the occurrence of multiple layers can introduce an additional error of about 30% for the mass load and 5% for the cloud top height. For the CALIOP data, comparisons with its predecessor VADUGS (operationally used by the DWD) show that VACOS is more robust, with retrieval errors of mass load and ash cloud top height reduced by >10% and >50%, respectively. Using the model data indicates an increase in detection rate in the order of 30% and more. The reliability under a wide spectrum of atmospheric conditions and volcanic ash types make VACOS a suitable tool for scientific studies and air traffic applications related to volcanic ash clouds.

Transport and Variability of Tropospheric Ozone over Oceania and Southern Pacific during the 2019–20 Australian Bushfires

The present study contributes to the scientific effort for a better understanding of the potential of the Australian biomass burning events to influence tropospheric trace gas abundances at the regional scale. In order to exclude the influence of the long-range transport of ozone precursors from biomass burning plumes originating from Southern America and Africa, the analysis of the Australian smoke plume has been driven over the period December 2019 to January 2020. This study uses satellite (IASI, MLS, MODIS, CALIOP) and ground-based (sun-photometer, FTIR, ozone radiosondes) observations. The highest values of aerosol optical depth (AOD) and carbon monoxide total columns are observed over Southern and Central Australia. Transport is responsible for the spatial and temporal distributions of aerosols and carbon monoxide over Australia, and also the transport of the smoke plume outside the continent. The dispersion of the tropospheric smoke plume over Oceania and Southern Pacific extends from tropical to extratropical latitudes. Ozone radiosonde measurements performed at Samoa (14.4°S, 170.6°W) and Lauder (45.0°S, 169.4°E) indicate an increase in mid-tropospheric ozone (6–9 km) (from 10% to 43%) linked to the Australian biomass burning plume. This increase in mid-tropospheric ozone induced by the transport of the smoke plume was found to be consistent with MLS observations over the tropical and extratropical latitudes. The smoke plume over the Southern Pacific was organized as a stretchable anticyclonic rolling which impacted the ozone variability in the tropical and subtropical upper-troposphere over Oceania. This is corroborated by the ozone profile measurements at Samoa which exhibit an enhanced ozone layer (29%) in the upper-troposphere. Our results suggest that the transport of Australian biomass burning plumes have significantly impacted the vertical distribution of ozone in the mid-troposphere southern tropical to extratropical latitudes during the 2019–20 extreme Australian bushfires.

Aerosol Direct Radiative Effects under Cloud-Free Conditions over Highly-Polluted Areas in Europe and Mediterranean: A Ten-Years Analysis (2007–2016)

This study investigates changes in aerosol radiative effects on two highly urbanized regions across the Euro-Mediterranean basin with respect to a natural desert region as Sahara over a decade through space-based lidar observations. The research is based on the monthly-averaged vertically-resolved aerosol optical depth (AOD) atmospheric profiles along a 1∘×1∘ horizontal grid, obtained from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) instrument measurements aboard the Cloud-Aerosol lidar and Infrared Pathfinder Satellite Observation (CALIPSO). To assess the variability of the anthropogenic aerosols on climate, we compared the aerosol vertical profile observations to a one-dimensional radiative transfer model in two metropolitan climate sensible hot-spots in Europe, namely the Po Valley and Benelux, to investigate the variability of the aerosol radiative effects over ten years. The same analysis is carried out as reference on the Sahara desert region, considered subject just to natural local emission. Our findings show the efficacy of emission reduction policies implemented at government level in strongly urbanized regions. The total atmospheric column aerosol load reduction (not observed in Sahara desert region) in Po Valley and Benelux can be associated with: (i) an increase of the energy flux at the surface via direct effects confirmed also by long term surface temperature observations, (ii) a general decrease of the atmospheric column, and likely (iii) an increase in surface temperatures during a ten-year period. Summarizing, the analysis, based on the decade 2007–2016, clearly show an increase of solar irradiation under cloud-free conditions at the surface of +3.6 % and +16.6% for the Po Valley and Benelux, respectively, and a reduction of −9.0% for the Sahara Desert.

Long-Term Variations of Global Solar Radiation and Atmospheric Constituents at Sodankylä in the Arctic

An empirical model of global solar irradiance (EMGSI) under all sky conditions was developed by using solar radiation and meteorological parameters at Sodankylä. The calculated hourly global solar irradiance is in agreement with that observed at the ground during 2008–2011 and at the top of the atmosphere (TOA). This model is used to calculate the global solar irradiance at the ground and its attenuation in the atmosphere due to absorbing and scattering substances in 2000–2018. The sensitivity test indicates that the responses of global solar irradiance to changes in water vapor and scattering factors are nonlinear and negative, and global solar irradiance is more sensitive to changes in scattering (expressed by the scattering factor S/G, S and G are diffuse and global solar radiation, respectively) than to changes in water vapor. Using this empirical model, we calculated the albedos at the TOA and the surface, which are in agreement with the satellite-retrieved values. A good relationship between S/G and aerosol optical depth (AOD) was determined and used to estimate AOD in 2000–2018. An empirical model for estimation of tropospheric NO2 vertical column density (VCD) was also developed and used to calculate tropospheric NO2 VCD in 2000–2018. During 2000–2018, the estimated global solar irradiance decreased by 0.92%, and diffuse irradiance increased by 1.28% per year, which is ascribed to the increases of S/G (1.73%) and water vapor (0.43%). Annual surface air temperature increases by 0.07 °C per year. Annual mean loss of global solar irradiance caused by absorbing and scattering substances and total loss are 1.94, 1.17 and 3.11 MJ m−2, respectively. Annual mean losses of absorbing and scattering global solar irradiance show negative and positive trends, respectively, and the annual total loss increases by 0.24% per year. Annual mean losses due to absorption were much larger than those due to scattering. The calculated albedos at the TOA are smaller than at the surface. The calculated and satellite-retrieved annual albedos decrease at the TOA and increase at the surface. During 2000–2018, annual means of the AOD and the tropospheric NO2 VCD increased by 8.23% and 0.03% per year, respectively.

Prediction of the Atmospheric Dustiness over the Black Sea Region Using the WRF-Chem Model

To make a reliable forecast for the level of dust, many external factors such as the wind energy and the soil content in the moisture must be considered. The numerical prediction of the Black sea region’s content of dust is the focus of this study, and for this purpose, the WRF-Chem model is used. The investigation is based on the statistics of the prediction coincidence and the actual result extracted from the data of the backward trajectories of AERONET and aerosol stratification maps in the atmosphere constructed with the help of the CALIPSO satellite. A comprehensive set of data was collected, and a comparative analysis of the results was carried out using machine learning techniques. The investigation identified 89% hits in the prediction of dust events, which is a very satisfactory result.

Quantify the Contribution of Dust and Anthropogenic Sources to Aerosols in North China by Lidar and Validated with CALIPSO

Persistent heavy haze episodes have repeatedly shrouded North China in recent years. Besides anthropogenic emissions, natural dust also contributes to the aerosols in this region. Through continuous observation by a dual-wavelength Raman lidar, the primary aerosol types and their contributions to air pollution in North China were determined. The following three aerosol types can be classified: natural dust, anthropogenic aerosols, and the mixture of anthropogenic aerosols and dust (polluted dust). The classification results are basically consistent with the classification results from the cloud–aerosol lidar and infrared pathfinder satellite observations (CALIPSO) satellite measurements. The relative bias of the lidar ratio between the Raman lidar and CALIPSO is less than 25% over 90% of the cases, indicating that the CALIPSO lidar ratio selection algorithm is reasonable. The classification results show that approximately 45% of aerosols below 1.8 km are contributed by polluted dust during our one year observations. The contribution of dust increased with height, from 6% at 500 m to 28% at 1,800 m, while the contribution of anthropogenic aerosols decreased from 49% to 25%. In addition, polluted dust is the major aerosol subtype below 1.0 km in spring (over 60%) and autumn (over 70%). Anthropogenic aerosols contribute more than 75% of air pollution in summer. In winter, anthropogenic aerosols prevailed (over 80%) in the lower layer, while polluted dust (around 60%) dominated the upper layer. Our results identified the primarily aerosol types to assess the contributions of anthropogenic and natural sources to air pollution in North China, and highlight that natural dust plays a crucial role in lower-layer air pollution in spring and autumn, while controlling anthropogenic aerosols will significantly improve air quality in winter.

Assessing CALIOP-Derived Planetary Boundary Layer Height Using Ground-Based Lidar

Coincident profiles from the space-borne and ground-based lidar measurements provide a unique opportunity to estimate the planetary boundary layer height (PBLH). In this study, PBLHs derived from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) were assessed by comparing them with those obtained from the ground-based lidar at Seoul National University (SNU) in Korea for both day and night from 2006 to 2019, and sounding data. CALIOP-derived PBLHs using wavelet covariance transform (WCT) are generally higher than those derived from the SNU lidar for both day and night. The difference in PBLH tends to increase as the signal-to-noise ratio for CALIOP decreases. The difference also increases as aerosol optical depth increases, implying that the PBLH estimated from CALIOP could be higher than that determined from the SNU lidar because of the signal attenuation within the aerosol layer under optically thick aerosol layer conditions. The higher PBLH for CALIOP in this study is mainly attributed to multiple aerosol layers. After eliminating multilayer cases, the PBLHs estimated from both the lidars showed significantly improved agreement: a mean difference of 0.09 km (R = 0.81) for daytime and 0.25 km (R = 0.51) for nighttime. The results from this study suggest that PBL detection using CALIOP is reliable for daytime if multilayer cases are removed. For nighttime, PBLHs derived from the SNU lidar and CALIOP showed a relatively large difference in frequency distribution compared with sounding data. It suggests that further investigations are needed for nighttime PBLHs, such as investigations about discriminating the residual layer and the difference between lidar-derived PBLH based on the aerosol layer and thermally derived PBLH from radiosonde data for the stable boundary layer during the nighttime.

Profiling Dust Mass Concentration in Northwest China Using a Joint Lidar and Sun-Photometer Setting

The satellite-based estimation of the dust mass concentration (DMC) is essential for accurately evaluating the global biogeochemical cycle of the dust aerosols. As for the uncertainties in estimating DMC caused by mixing dust and pollutants and assuming a fixed value for the mass extinction efficiency (MEE), a classic lidar-photometer method is employed to identify and separate the dust from pollutants, obtain the dust MEE, and evaluate the effect of the above uncertainties, during five dust field experiments in Northwest China. Our results show that this method is effective for continental aerosol mixtures consisting of dust and pollutants. It is also seen that the dust loading mainly occurred in the free troposphere (<6 km), with the average mass loading of 905 ± 635 µg m−2 trapped in the planetary boundary layer. The dust MEE ranges from 0.30 to 0.60 m2 g−1 and has a significantly negative relationship with the size of dust particles. With the assumption of the dust MEE of 0.37 (0.60) m2 g−1, the DMC is shown to be overestimated (underestimated) by 20–40% (15–30%). In other words, our results suggest that the change of MEE with the size of dust particles should be considered in the estimation of DMC.

An Overview of Atmospheric Features Over the Western North Atlantic Ocean and North American East Coast - Part 1: Analysis of Aerosols, Gases, and Wet Deposition Chemistry

The Western North Atlantic Ocean (WNAO) and adjoining East Coast of North America are of great importance for atmospheric research and have been extensively studied for several decades. This broad region exhibits complex meteorological features and a wide range of conditions associated with gas and particulate species from many sources regionally and other continents. As Part 1 of a 2-part paper series, this work characterizes quantities associated with atmospheric chemistry, including gases, aerosols, and wet deposition, by analyzing available satellite observations, ground-based data, model simulations, and reanalysis products. Part 2 provides insight into the atmospheric circulation, boundary layer variability, three-dimensional cloud structure, properties, and precipitation over the WNAO domain. Key results include spatial and seasonal differences in composition along the North American East Coast and over the WNAO associated with varying sources of smoke and dust and meteorological drivers such as temperature, moisture, and precipitation. Spatial and seasonal variations of tropospheric carbon monoxide and ozone highlight different pathways toward the accumulation of these species in the troposphere. Spatial distributions of speciated aerosol optical depth and vertical profiles of aerosol mass mixing ratios show a clear seasonal cycle highlighting the influence of different sources in addition to the impact of intercontinental transport. Analysis of long-term climate model simulations of aerosol species and satellite observations of carbon monoxide confirm that there has been a significant decline in recent decades among anthropogenic constituents owing to regulatory activities.

Spatiotemporal Investigations of Multi-Sensor Air Pollution Data over Bangladesh during COVID-19 Lockdown

This study investigates spatiotemporal changes in air pollution (particulate as well as gases) during the COVID-19 lockdown period over major cities of Bangladesh. The study investigated the aerosol optical depth (AOD) from the Moderate Resolution Imaging Spectroradiometer (MODIS) onboard Terra and Aqua satellites, PM2.5 and PM10 from Copernicus Atmosphere Monitoring Service (CAMS), and NO2 and O3 from TROPOMI-5P, from March to June 2019–2020. Additionally, aerosol subtypes from the Cloud-Aerosol Lidar and Infrared Pathfinder (CALIPSO) were used to explore the aerosol types. The strict lockdown (26 March–30 May 2020) led to a significant reduction in AOD (up to 47%) in all major cities, while the partial lockdown (June 2020) led to increased and decreased AOD over the study area. Significant reductions in PM2.5 (37–77%) and PM10 (33–70%) were also observed throughout the country during the strict lockdown and partial lockdown. The NO2 levels decreased by 3–25% in March 2020 in the cities of Rajshahi, Chattogram, Sylhet, Khulna, Barisal, and Mymensingh, in April by 3–43% in Dhaka, Chattogram, Khulna, Barisal, Bhola, and Mymensingh, and May by 12–42% in Rajshahi, Sylhet, Mymensingh, and Rangpur. During the partial lockdown in June, NO2 decreased (9–35%) in Dhaka, Chattogram, Sylhet, Khulna, Barisal, and Rangpur compared to 2019. On the other hand, increases were observed in ozone (O3) levels, with an average increase of 3–12% throughout the country during the strict lockdown and only a slight reduction of 1–3% in O3 during the partial lockdown. In terms of aerosol types, CALIPSO observed high levels of polluted dust followed by dust, smoke, polluted continental, and clean marine-type aerosols over the country in 2019, but all types were decreased during the lockdown. The study concludes that the strict lockdown measures were able to significantly improve air quality conditions over Bangladesh due to the shutdown of industries, vehicles, and movement of people.

Characterization of Aerosol Sources and Optical Properties in Siberia Using Airborne and Spaceborne Observations

Airborne backscatter lidar at 532 nm and in-situ measurements of black carbon (BC), carbon monoxide excess above background (ΔCO), and aerosol size distribution were carried out over Siberia in July 2013 and June 2017 in order to sample several kinds of aerosol sources. Aerosol types are derived using the Lagrangian FLEXible PARTicle dispersion model (FLEXPART) simulations and satellite observations. Six aerosol types could be identified in this work: (i) dusty aerosol mixture, (ii) Ob valley gas flaring emission, (iii) fresh forest fire, (iv) aged forest fire, (v) urban emissions over the Tomsk/Novosibirsk region (vi) long range transport of Northern China urban emission. The altitude range of aerosol layers is discussed for each aerosol type, showing transport above the boundary layer for long range transport of Northern China emissions or fresh forest fire. Comparisons of aerosol optical properties, BC and ΔCO are made between aged and fresh plumes for both the urban and forest fire emissions. An increase of aerosol optical depth at 532 nm (AOD532), aerosol particle size and ΔCO is found for aged forest fire plumes. Similar results are obtained when comparing the aged urban plume from Northern China with fresh urban emissions from Siberian cities. A flight above gas flaring emissions corresponds to the largest AOD532 and provides a possible range of 50–60 sr for the lidar ratio of these aerosol plumes often encountered in Siberia. Black carbon concentrations are relatively higher for the flaring plume (0.4–0.5 μμg.m−3) than for the urban plume (0.2 μμg.m−3). The largest BC concentrations are found for the fresh forest fire plume. The aerosol type identification and AOD532 provided by CALIOP Version 4.2 data products in air masses with similar origin generally agree with the results obtained from our detailed analysis of the aerosol plume origins.

Aerosol properties in the atmosphere of Natal/Brazil measured by an AERONET Sun-photometer

We analyzed data measured by a Sun-photometer of the RIMA-AERONET network with the purpose to characterize the aerosol properties in the atmosphere over Natal, state capital of Rio Grande do Norte, at the coast of Northeast Brazil. Aerosol Optical Depth, Ångström Exponent, Volume Size Distribution, Single Scattering Albedo, Complex Refractive Index, Asymmetry Factor, and Precipitable Water were analyzed from August 2017 to March 2018. In addition, MODIS and CALIOP observations, local Lidar measurements, and modeled backward trajectories were analyzed in a case study on February 9, 2018, that consistently confirmed the identification of a persistent aerosol layer below 4 km agl. Aerosols present in the atmosphere of Natal showed monthly mean Aerosol Optical Depth at 500 nm below 0.15 (~ 75%), monthly means of the Ångström Exponent at 440-670 nm between 0.30 and 0.70 (~ 69%), bimodal Volume Size Distribution is dominantly coarse mode, Single Scattering Albedo at 440 nm is 0.80, Refractive Index - Real Part around 1.50, Refractive Index - Imaginary Part ranging from 0.01 to 0.04, and the Asymmetry Factor ranged from 0.73 to 0.80. The aerosol typing during the measurement period showed that atmospheric aerosol over Natal is mostly composed of mixed aerosol (58.10%), marine aerosol (34.80%), mineral dust (6.30%), and biomass burning aerosols (0.80%). Backward trajectories identified that 51% of the analyzed air masses over Natal originated from the African continent.

Machine Learning Based Algorithms for Global Dust Aerosol Detection from Satellite Images: Inter-Comparisons and Evaluation

Identifying dust aerosols from passive satellite images is of great interest for many applications. In this study, we developed five different machine-learning (ML) based algorithms, including Logistic Regression, K Nearest Neighbor, Random Forest (RF), Feed Forward Neural Network (FFNN), and Convolutional Neural Network (CNN), to identify dust aerosols in the daytime satellite images from the Visible Infrared Imaging Radiometer Suite (VIIRS) under cloud-free conditions on a global scale. In order to train the ML algorithms, we collocated the state-of-the-art dust detection product from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) with the VIIRS observations along the CALIOP track. The 16 VIIRS M-band observations with the center wavelength ranging from deep blue to thermal infrared, together with solar-viewing geometries and pixel time and locations, are used as the predictor variables. Four different sets of training input data are constructed based on different combinations of VIIRS pixel and predictor variables. The validation and comparison results based on the collocated CALIOP data indicate that the FFNN method based on all available predictor variables is the best performing one among all methods. It has an averaged dust detection accuracy of about 81%, 89%, and 85% over land, ocean and whole globe, respectively, compared with collocated CALIOP. When applied to off-track VIIRS pixels, the FFNN method retrieves geographical distributions of dust that are in good agreement with on-track results as well as CALIOP statistics. For further evaluation, we compared our results based on the ML algorithms to NOAA’s Aerosol Detection Product (ADP), which is a product that classifies dust, smoke, and ash using physical-based methods. The comparison reveals both similarity and differences. Overall, this study demonstrates the great potential of ML methods for dust detection and proves that these methods can be trained on the CALIOP track and then applied to the whole granule of VIIRS granule.

Multitechnique Observations on the Impacts of Declining Air Pollution on the Atmospheric Convective Processes During COVID-19 Pandemic at a Tropical Metropolis

The present study addresses the impacts of reduced anthropogenic activities during the lockdown period of COVID-19 pandemic on the aerosol concentration, treated as heat absorbing agent, and on the related atmospheric processes, using ground-based and spaceborne measurements over a highly polluted Indian metropolis, Kolkata. The investigation reveals that reduced aerosol concentrations during the pre-monsoon of 2020, when the lockdown was implemented, decreased atmospheric instability as indicated by low values of the convective available potential energy (CAPE). This hindered the abundance of aerosols above the atmospheric boundary layer. Also, micro rain radar (MRR) observations showed a significant reduction of convective precipitation occurrences over Kolkata during this period. The back trajectory analysis has revealed the absence of continental component toward the wind clusters associated with rain occurrences during pre-monsoon 2020. This resulted in increased occurrences of stratiform rain events during the pre-monsoon of 2020 compared to the same period of previous years.

Identifying Aerosol Subtypes from CALIPSO Lidar Profiles Using Deep Machine Learning

The Cloud–Aerosol Lidar with Orthogonal Polarization (CALIOP), on-board the Cloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) platform, is an elastic backscatter lidar that has been providing vertical profiles of the spatial, optical, and microphysical properties of clouds and aerosols since June 2006. Distinguishing between feature types (i.e., clouds vs. aerosol) and subtypes (e.g., ice clouds vs. water clouds and dust aerosols from smoke) in the CALIOP measurements is currently accomplished using layer-integrated measurements acquired by co-polarized (parallel) and cross-polarized (perpendicular) 532 nm channels and a single 1064 nm channel. Newly developed deep machine learning (DML) semantic segmentation methods now have the ability to combine observations from multiple channels with texture information to recognize patterns in data. Instead of focusing on a limited set of layer integrated values, our new DML feature classification technique uses the full scope of range-resolved information available in the CALIOP attenuated backscatter profiles. In this paper, one of the convolutional neural networks (CNN), SegNet, a fast and efficient DML model, is used to distinguish aerosol subtypes directly from the CALIOP profiles. The DML method is a 2D range bin-to-range bin aerosol subtype classification algorithm. We compare our new DML results to the classifications generated by CALIOP’s 1D layer-to-layer operational retrieval algorithm. These two methods, which take distinctly different approaches to aerosol classification, agree in over 60% of the comparisons. Higher levels of agreement are found in homogeneous scenes containing only a single aerosol type (i.e., marine, stratospheric aerosols). Disagreement between the two techniques increases in regions containing mixture of different aerosol types. The multi-dimensional texture information leveraged by the DML method shows advantages in differentiating between aerosol types based on their classification scores, as well as in distinguishing vertical distributions of aerosol types within individual layers. However, untangling mixtures of aerosol subtypes is still challenging for both the DML and operational algorithms.

Differences in the Evolution of Pyrocumulonimbus and Volcanic Stratospheric Plumes as Observed by CATS and CALIOP Space-Based Lidars

Recent fire seasons have featured volcanic-sized injections of smoke aerosols into the stratosphere where they persist for many months. Unfortunately, the aging and transport of these aerosols are not well understood. Using space-based lidar, the vertical and spatial propagation of these aerosols can be tracked and inferences can be made as to their size and shape. In this study, space-based CATS and CALIOP lidar were used to track the evolution of the stratospheric aerosol plumes resulting from the 2019–2020 Australian bushfire and 2017 Pacific Northwest pyrocumulonimbus events and were compared to two volcanic events: Calbuco (2015) and Puyehue (2011). The pyrocumulonimbus and volcanic aerosol plumes evolved distinctly, with pyrocumulonimbus plumes rising upwards of 10 km after injection to altitudes of 30 km or more, compared to small to modest altitude increases in the volcanic plumes. We also show that layer-integrated depolarization ratios in these large pyrocumulonimbus plumes have a strong altitude dependence with more irregularly shaped particles in the higher altitude plumes, unlike the volcanic events studied.

Ten-year global particulate mass concentration derived from space-borne CALIPSO lidar observations

Passive remote sensing has been widely used in recent decades to obtain global particulate matter (PM) mass concentration at daytime and under cloud-free condition. In this study, a retrieval method was developed for providing PM (PM₁₀ and PM_2.5) mass concentration both at daytime and nighttime using the latest data version (V4.10) from space-borne Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) lidar measurements. The advantage of the method is that PM₁₀ & PM_2.5 mass concentrations were obtained for seven aerosol types respectively base on active remote sensing observation at daytime and nighttime, even under cloudy condition. The results show that satellite-based PM mass concentrations are in good agreement with in-situ observations from 1602 ground monitoring sites throughout the world. Moreover, global distributions of PM₁₀ and PM_2.5 mass concentration during 2007-2016 were investigated, showing that for Beijing the annual mean PM_2.5 mass concentration at nighttime is 11.31% less than those at daytime, however for London is 36.62%. It is suggested that diurnal variations in PM_2.5 mass concentration are closely related to human activities. This work provides a reliable high-resolution database for long-term particulate mass concentrations on the global scale, which is of importance to evaluate aerosol impacts on climate, environment as well as ecosystem.