Catalysis-dependent selenium incorporation and migration in the nitrogenase active site iron-molybdenum cofactor

The nitrogenase mechanism: new roles for the dangler?

Dangler sites protruding from a core metallocluster were introduced into the bioinorganic lexicon in 2000 by R.D. Britt and co-workers in an analysis of the tetramanganese oxygen-evolving cluster in photosystem II. In this perspective, we consider whether analogous dangler sites could participate in the mechanism of dinitrogen reduction by nitrogenase. Two possible roles for dynamic danglers in the active site FeMo cofactor are highlighted that might occur transiently during turnover. The first role for a dangler involves the S2B belt sulfur associated with displacement by carbon monoxide and other ligands, while the second dangler role could involve the entire cluster upon displacement of the His-  α  442 side chain to the molybdenum by a free carboxyl group of the homocitrate ligand. To assess whether waters might be able to interact with the cofactor, a survey of small ligands (water and alkali metal ions) contacting [4Fe4S] clusters in synthetic compounds and proteins was conducted. This survey reveals a preference for these sites to pack over the centers of 2Fe2S rhombs. Waters are excluded from the S2B site in the resting state of nitrogenase, suggesting it is unlikely that water molecules coordinate to the FeMo cofactor during catalysis. While alkali metal ions are found to generally influence the properties of catalysts for dinitrogen reduction, no convincing evidence was found that any of the waters near the FeMo cofactor could instead be sodium or potassium ions. Dangler sites, if they exist in the nitrogenase mechanism, are likely formed transiently by localized changes to the resting-state FeMo cofactor structure.

Understanding non-reducible N2 in the mechanism of Mo-nitrogenase

In my proposed mechanism of Mo-nitrogenase there are two roles for separate N2 molecules. One N2 diffuses into the reaction zone between Fe2 and Fe6 where a strategic gallery of H atoms can capture N2 to form the Fe-bound HNNH intermediate which is then progressively hydrogenated through intermediates containing HNNH2, NH and NH2 entities and then two NH3 in sequence. The second N2 can be parked in an N2-pocket about 3.2 Å from Fe2 or bind end-on at the exo coordination site of Fe2. This second N2 is outside the reaction zone, not exposed to H atom donors, and so is 'non-reducible'. Here density functional calculations using a 485+ atom model describe the thermodynamics for non-reducible N2 moving between the N2-pocket and the exo-Fe2 position, for the resting state and 19 intermediates in the mechanism. The entropy component is estimated and included. The result is that for all intermediates with ligation by H or NHx at the endo-Fe2 position the free energy for association of non-reducible N2 at exo-Fe2 is negative. There remains some uncertainty about the status of exo-Fe2-N2 during the step in which H2 exchanges with the incoming reducible N2, where at least two unbound molecules are present. At Fe2 it is evident that attainment of octahedral coordination stereochemistry dominates the binding thermodynamics for non-reducible N2. Possibilities for experimental support of these computational conclusions are discussed.

The mechanism of Mo-nitrogenase: from N2 capture to first release of NH3

Mo-nitrogenase hydrogenates N2 to NH3. This report continues from the previous paper [I. Dance, Dalton Trans., 2024, 53, 14193-14211] that described how the active site FeMo-co of the enzyme is uniquely able to capture and activate N2, forming a key intermediate with Fe-bound HNNH. Density functional simulations with a 485+ atom model of the active site and its surroundings are used to describe here the further reactions of this HNNH intermediate. The first step is hydrogenation to form HNNH2 bridging Fe2 and Fe6. Then a single-step reaction breaks the N-N bond, generating an Fe2-NH-Fe6 bridge and forming NH3 bound to Fe6. Then NH3 dissociates from Fe6. Reaction potential energies and kinetic barriers for all steps are reported for the most favourable electronic states of the system. The steps that follow the Fe2-NH-Fe6 intermediate, forming and dissociating the second NH3, and regenerating the resting state of the enzyme, are outlined. These results provide an interpretation of the recent steady-state kinetics data and analysis by Harris et al., [Biochemistry, 2022, 61, 2131-2137] who found a slow step after the formation of the HNNH intermediate. The calculated potential energy barriers for the HNNH2 → NH + NH3 reaction (30-36 kcal mol-1) are larger than the potential energy barriers for the N2 → HNNH reaction (19-29 kcal mol-1). I propose that the post-HNNH slow step identified kinetically is the key HNNH2 → NH + NH3 reaction described here. This step and the N2-capture step are the most difficult in the conversion of N2 to 2NH3. The steps in the complete mechanism still to be computationally detailed are relatively straightforward.

Structural evolution of nitrogenase states under alkaline turnover

Biological nitrogen fixation, performed by the enzyme nitrogenase, supplies nearly 50% of the bioavailable nitrogen pool on Earth, yet the structural nature of the enzyme intermediates involved in this cycle remains ambiguous. Here we present four high resolution cryoEM structures of the nitrogenase MoFe-protein, sampled along a time course of alkaline reaction mixtures under an acetylene atmosphere. This series of structures reveals a sequence of salient changes including perturbations to the inorganic framework of the FeMo-cofactor; depletion of the homocitrate moiety; diminished density around the S2B belt sulfur of the FeMo-cofactor; rearrangements of cluster-adjacent side chains; and the asymmetric displacement of the FeMo-cofactor. We further demonstrate that the nitrogenase associated factor T protein can recognize and bind an alkaline inactivated MoFe-protein in vitro. These time-resolved structures provide experimental support for the displacement of S2B and distortions of the FeMo-cofactor at the E0-E3 intermediates of the substrate reduction mechanism, prior to nitrogen binding, highlighting cluster rearrangements potentially relevant to nitrogen fixation by biological and synthetic clusters.

Bionic Design of Iron-Doped MoSe2 Catalyst for Efficient Nitrogen Fixation

The catalytic system of biological nitrogen fixation in nature primarily relies on the "FeMo cofactor" within nitrogenase enzymes. Inspired by this natural structure, we have designed a bionic inorganic counterpart, iron-doped MoSe2, for the efficient electroreduction of dinitrogen to ammonia. The introduced Fe dopant significantly enhances nitrogen fixation activity of MoSe2. Furthermore, we constructed a heterostructure catalyst, the Fe-MoSe2/Mo2C with more versatile Mo valence states. The heterostructured electrocatalyst achieves an ammonia production rate of 3.38 μg cm-2 h-1, and a Faradaic efficiency of 30.8 %, which is ~5 fold higher than that of pristine MoSe2. This study presents a novel approach for designing bionic nitrogen fixation electrocatalysts.

The activating capture of N2 at the active site of Mo-nitrogenase

Dinitrogen is inherently inert. This report describes detailed density functional calculations (with a 485+ atom model) of mechanistic steps by which the enzyme nitrogenase activates unreactive N2 at the intact active site FeMo-co, to form a key intermediate with bound HNNH. This mechanism does not bind N2 first and then add H atoms, but rather captures N2 ('N2-ready') that diffuses in through the substrate channel and enters a strategic gallery of H atom donors in the reaction zone, between Fe2 and Fe6. This occurs at the E4 stage of the complete mechanism. Exploration of possible reactions of N2 in this space leads to the conclusion that the first reaction step is transfer of H on Fe7 to one end of N2-ready, soon followed by Fe-N bond formation, and then a second H transfer from bridging S2BH to the other N. Two H-N bonds and one or two N-Fe bonds are formed, in some cases with a single transition state. The variable positions and orientations of N2-ready lead to various reaction trajectories and products. The favourable products resulting from this capture, judged by the criteria of reaction energies, reaction barriers, and mechanistic competence for further hydrogenation reactions in the nitrogenase cycle, have Fe2-NH-NH bonding. The trajectory of one N2 capture reaction is described in detail, and calculations that separate the H atom component and the 'heavy atom' components of the classical activation energy are described, in the context of possible H atom tunneling in the activation of N2-ready. I present arguments for the activation of N2 by the pathway of concerted hydrogenation and binding of N2-ready, alternative to the commonly assumed pathway of binding N2 first, with subsequent hydrogenation. The active site of nitrogenase is well primed for the thermodynamic and kinetic advantages of N2 capture.

Anaerobic cryoEM protocols for air-sensitive nitrogenase proteins

Single-particle cryo-electron microscopy (cryoEM) provides an attractive avenue for advancing our atomic resolution understanding of materials, molecules and living systems. However, the vast majority of published cryoEM methodologies focus on the characterization of aerobically purified samples. Air-sensitive enzymes and microorganisms represent important yet understudied systems in structural biology. We have recently demonstrated the success of an anaerobic single-particle cryoEM workflow applied to the air-sensitive nitrogenase enzymes. In this protocol, we detail the use of Schlenk lines and anaerobic chambers to prepare samples, including a protein tag for monitoring sample exposure to oxygen in air. We describe how to use a plunge freezing apparatus inside of a soft-sided vinyl chamber of the type we routinely use for anaerobic biochemistry and crystallography of oxygen-sensitive proteins. Manual control of the airlock allows for introduction of liquid cryogens into the tent. A custom vacuum port provides slow, continuous evacuation of the tent atmosphere to avoid accumulation of flammable vapors within the enclosed chamber. These methods allowed us to obtain high-resolution structures of both nitrogenase proteins using single-particle cryoEM. The procedures involved can be generally subdivided into a 4 d anaerobic sample generation procedure, and a 1 d anaerobic cryoEM sample preparation step, followed by conventional cryoEM imaging and processing steps. As nitrogen is a substrate for nitrogenase, the Schlenk lines and anaerobic chambers described in this procedure are operated under an argon atmosphere; however, the system and these procedures are compatible with other controlled gas environments.

ATP-Independent Turnover of Dinitrogen Intermediates Captured on the Nitrogenase Cofactor

Nitrogenase reduces N2 to NH3 at its active-site cofactor. Previous studies of an N2-bound Mo-nitrogenase from Azotobacter vinelandii suggest binding of three N2 species via asymmetric belt-sulfur displacements in the two cofactors of its catalytic component (designated Av1*), leading to the proposal of stepwise N2 reduction involving all cofactor belt-sulfur sites; yet, the evidence for the existence of multiple N2 species on Av1* remains elusive. Here we report a study of ATP-independent, EuII/SO3 2--driven turnover of Av1* using GC-MS and frequency-selective pulse NMR techniques. Our data demonstrate incorporation of D2-derived D by Av1* into the products of C2H2- and H+-reduction, and decreased formation of NH3 by Av1* concomitant with the release of N2 under H2; moreover, they reveal a strict dependence of these activities on SO3 2-. These observations point to the presence of distinct N2 species on Av1*, thereby providing strong support for our proposed mechanism of stepwise reduction of N2 via belt-sulfur mobilization.

Analysis of early intermediate states of the nitrogenase reaction by regularization of EPR spectra

Due to the complexity of the catalytic FeMo cofactor site in nitrogenases that mediates the reduction of molecular nitrogen to ammonium, mechanistic details of this reaction remain under debate. In this study, selenium- and sulfur-incorporated FeMo cofactors of the catalytic MoFe protein component from Azotobacter vinelandii are prepared under turnover conditions and investigated by using different EPR methods. Complex signal patterns are observed in the continuous wave EPR spectra of selenium-incorporated samples, which are analyzed by Tikhonov regularization, a method that has not yet been applied to high spin systems of transition metal cofactors, and by an already established grid-of-error approach. Both methods yield similar probability distributions that reveal the presence of at least four other species with different electronic structures in addition to the ground state E0. Two of these species were preliminary assigned to hydrogenated E2 states. In addition, advanced pulsed-EPR experiments are utilized to verify the incorporation of sulfur and selenium into the FeMo cofactor, and to assign hyperfine couplings of 33S and 77Se that directly couple to the FeMo cluster. With this analysis, we report selenium incorporation under turnover conditions as a straightforward approach to stabilize and analyze early intermediate states of the FeMo cofactor.

Nitrogenase beyond the Resting State: A Structural Perspective

Nitrogenases have the remarkable ability to catalyze the reduction of dinitrogen to ammonia under physiological conditions. How does this happen? The current view of the nitrogenase mechanism focuses on the role of hydrides, the binding of dinitrogen in a reductive elimination process coupled to loss of dihydrogen, and the binding of substrates to a binuclear site on the active site cofactor. This review focuses on recent experimental characterizations of turnover relevant forms of the enzyme determined by cryo-electron microscopy and other approaches, and comparison of these forms to the resting state enzyme and the broader family of iron sulfur clusters. Emerging themes include the following: (i) The obligatory coupling of protein and electron transfers does not occur in synthetic and small-molecule iron-sulfur clusters. The coupling of these processes in nitrogenase suggests that they may involve unique features of the cofactor, such as hydride formation on the trigonal prismatic arrangement of irons, protonation of belt sulfurs, and/or protonation of the interstitial carbon. (ii) Both the active site cofactor and protein are dynamic under turnover conditions; the changes are such that more highly reduced forms may differ in key ways from the resting-state structure. Homocitrate appears to play a key role in coupling cofactor and protein dynamics. (iii) Structural asymmetries are observed in nitrogenase under turnover-relevant conditions by cryo-electron microscopy, although the mechanistic relevance of these states (such as half-of-sites reactivity) remains to be established.

Catalysis and structure of nitrogenases

In providing bioavailable nitrogen as building blocks for all classes of biomacromolecules, biological nitrogen fixation is an essential process for all organismic life. Only a single enzyme, nitrogenase, performs this task at ambient conditions and with ATP as an energy source. The assembly of the complex iron-sulfur enzyme nitrogenase and its catalytic mechanism remains a matter of intense study. Recent progress in the structural analysis of the three known isoforms of nitrogenase-differentiated primarily by the heterometal in their active site cofactor-has revealed a degree of structural plasticity of these clusters that suggest two distinct binding sites for substrates and reaction intermediates. A mechanistic proposal based on this finding integrates most of the available experimental data. Furthermore, the first applications of high-resolution cryo-electron microscopy have highlighted further dynamic conformational changes. Structures obtained under turnover conditions support the proposed alternating half-site reactivity in the C2-symmetric nitrogenase complex.

An Iron-Sulfur Cluster with a Highly Pyramidalized Three-Coordinate Iron Center and a Negligible Affinity for Dinitrogen

Attempts to generate open coordination sites for N2 binding at synthetic Fe-S clusters often instead result in cluster oligomerization. Recently, it was shown for Mo-Fe-S clusters that such oligomerization reactions can be prevented through the use of sterically protective supporting ligands, thereby enabling N2 complex formation. Here, this strategy is extended to Fe-only Fe-S clusters. One-electron reduction of (IMes)3Fe4S4Cl (IMes = 1,3-dimesitylimidazol-2-ylidene) forms the transiently stable edge-bridged double cubane (IMes)6Fe8S8, which loses two IMes ligands to form the face-bridged double-cubane, (IMes)4Fe8S8. The finding that the three supporting IMes ligands do not confer sufficient protection to curtail cluster oligomerization prompted the design of a new N-heterocyclic carbene, SIArMe,iPr (1,3-bis(3,5-diisopropyl-2,6-dimethylphenyl)-2-imidazolidinylidene; abbreviated as SIAr), that features bulky groups strategically placed in remote positions. When the reduction of (SIAr)3Fe4S4Cl or [(SIAr)3Fe4S4(THF)]+ is conducted in the presence of SIAr, the formation of (SIAr)4Fe8S8 is indeed suppressed, permitting characterization of the reduced [Fe4S4]0 product. Surprisingly, rather than being an N2 complex, the product is simply (SIAr)3Fe4S4: a cluster with a three-coordinate Fe site that adopts an unusually pyramidalized geometry. Although (SIAr)3Fe4S4 does not coordinate N2 to any appreciable extent under the surveyed conditions, it does bind CO to form (SIAr)3Fe4S4(CO). This finding demonstates that the binding pocket at the unique Fe is not too small for N2; instead, the exceptionally weak affinity for N2 can be attributed to weak Fe-N2 bonding. The differences in the N2 coordination chemistry between sterically protected Mo-Fe-S clusters and Fe-only Fe-S clusters are discussed.

Modeling the Correlation between Z and B in an X-ray Crystal Structure Refinement

We have examined how the refined B-factor changes as a function of Z (the atomic number of a scatterer) at the sulfur site of the [4Fe:4S] cluster of the nitrogenase iron protein by refinement. A simple model is developed that quantitatively captures the observed relationship between Z and B, based on a Gaussian electron density distribution with a constant electron density at the position of the scatterer. From this analysis, the fractional changes in B and Z are found to be similar. The utility of B-factor refinement to potentially distinguish atom types reflects the Z dependence of X-ray atomic scattering factors; the weaker dependence of electron atomic scattering factors on Z implies that distinctions between refined values of B in an electron scattering structure will be less sensitive to the atomic identity of a scatterer than for the case with X-ray-diffraction. This behavior provides an example of the complementary information that can be extracted from different types of scattering studies.

Enzymatic Fischer-Tropsch-Type Reactions

The Fischer-Tropsch (FT) process converts a mixture of CO and H2 into liquid hydrocarbons as a major component of the gas-to-liquid technology for the production of synthetic fuels. Contrary to the energy-demanding chemical FT process, the enzymatic FT-type reactions catalyzed by nitrogenase enzymes, their metalloclusters, and synthetic mimics utilize H+ and e- as the reducing equivalents to reduce CO, CO2, and CN- into hydrocarbons under ambient conditions. The C1 chemistry exemplified by these FT-type reactions is underscored by the structural and electronic properties of the nitrogenase-associated metallocenters, and recent studies have pointed to the potential relevance of this reactivity to nitrogenase mechanism, prebiotic chemistry, and biotechnological applications. This review will provide an overview of the features of nitrogenase enzymes and associated metalloclusters, followed by a detailed discussion of the activities of various nitrogenase-derived FT systems and plausible mechanisms of the enzymatic FT reactions, highlighting the versatility of this unique reactivity while providing perspectives onto its mechanistic, evolutionary, and biotechnological implications.

Connecting the geometric and electronic structures of the nitrogenase iron-molybdenum cofactor through site-selective 57Fe labelling

Understanding the chemical bonding in the catalytic cofactor of the Mo nitrogenase (FeMo-co) is foundational for building a mechanistic picture of biological nitrogen fixation. A persistent obstacle towards this goal has been that the 57Fe-based spectroscopic data-although rich with information-combines responses from all seven Fe sites, and it has therefore not been possible to map individual spectroscopic responses to specific sites in the three-dimensional structure. Here we have addressed this challenge by incorporating 57Fe into a single site of FeMo-co. Spectroscopic analysis of the resting state informed on the local electronic structure of the terminal Fe1 site, including its oxidation state and spin orientation, and, in turn, on the spin-coupling scheme for the entire cluster. The oxidized resting state and the first intermediate in nitrogen fixation were also characterized, and comparisons with the resting state provided molecular-level insights into the redox chemistry of FeMo-co.

Structural consequences of turnover-induced homocitrate loss in nitrogenase

Nitrogenase catalyzes the ATP-dependent reduction of dinitrogen to ammonia during the process of biological nitrogen fixation that is essential for sustaining life. The active site FeMo-cofactor contains a [7Fe:1Mo:9S:1C] metallocluster coordinated with an R-homocitrate (HCA) molecule. Here, we establish through single particle cryoEM and chemical analysis of two forms of the Azotobacter vinelandii MoFe-protein - a high pH turnover inactivated species and a ∆NifV variant that cannot synthesize HCA - that loss of HCA is coupled to α-subunit domain and FeMo-cofactor disordering, and formation of a histidine coordination site. We further find a population of the ∆NifV variant complexed to an endogenous protein identified through structural and proteomic approaches as the uncharacterized protein NafT. Recognition by endogenous NafT demonstrates the physiological relevance of the HCA-compromised form, perhaps for cofactor insertion or repair. Our results point towards a dynamic active site in which HCA plays a role in enabling nitrogenase catalysis by facilitating activation of the FeMo-cofactor from a relatively stable form to a state capable of reducing dinitrogen under ambient conditions.

The binding of reducible N2 in the reaction domain of nitrogenase

The binding of N₂ to FeMo-co, the catalytic site of the enzyme nitrogenase, is central to the conversion to NH₃, but also has a separate role in promoting the N₂-dependent HD reaction (D₂ + 2H⁺ + 2e^- → 2HD). The protein surrounding FeMo-co contains a clear channel for ingress of N₂, directly towards the exo-coordination position of Fe2, a position which is outside the catalytic reaction domain. This led to the hypothesis [I. Dance, Dalton Trans., 2022, 51, 12717] of 'promotional' N₂ bound at exo-Fe2, and a second 'reducible' N₂ bound in the reaction domain, specifically the endo-coordination position of Fe2 or Fe6. The range of possibilities for the binding of reducible N₂ in the presence of bound promotional N₂ is described here, using density functional simulations with a 486 atom model of the active site and surrounding protein. The pathway for ingress of the second N₂ through protein, past the first N₂ at exo-Fe2, and tumbling into the binding domain between Fe2 and Fe6, is described. The calculations explore 24 structures involving 6 different forms of hydrogenated FeMo-co, including structures with S2BH unhooked from Fe2 but tethered to Fe6. The calculations use the most probable electronic states. End-on (η¹) binding of N₂ at the endo position of either Fe2 or Fe6 is almost invariably exothermic, with binding potential energies ranging up to -18 kcal mol^-1. Many structures have binding energies in the range -6 to -14 kcal mol^-1. The relevant entropic penalty for N₂ binding from a diffusible position within the protein is estimated to be 4 kcal mol^-1, and so the binding free energies for reducible N₂ are suitably negative. N₂ binding at endo-Fe2 is stronger than at endo-Fe6 in three of the six structure categories. In many cases the reaction domain containing reducible N₂ is expanded. These results inform computational simulation of the subsequent steps in which surrounding H atoms transfer to reducible N₂.

Facile and dynamic cleavage of every iron-sulfide bond in cuboidal iron-sulfur clusters

Nature employs weak-field metalloclusters to support a wide range of biological processes. The most ubiquitous metalloclusters are the cuboidal Fe-S clusters, which are comprised of Fe sites with locally high-spin electronic configurations. Such configurations enhance rates of ligand exchange and imbue the clusters with a degree of structural plasticity that is increasingly thought to be functionally relevant. Here, we examine this phenomenon using isotope tracing experiments. Specifically, we demonstrate that synthetic [Fe4S4] and [MoFe3S4] clusters exchange their Fe atoms with Fe2+ ions dissolved in solution, a process that involves the reversible cleavage and reformation of every Fe-S bond in the cluster core. This exchange is facile-in most cases occurring at room temperature on the timescale of minutes-and documented over a range of cluster core oxidation states and terminal ligation patterns. In addition to suggesting a highly dynamic picture of cluster structure, these results provide a method for isotopically labeling pre-formed clusters with spin-active nuclei, such as 57Fe. Such a protocol is demonstrated for the radical S-adenosyl-l-methionine enzyme, RlmN.

The HD Reaction of Nitrogenase: a Detailed Mechanism

Nitrogenase is the enzyme that converts N2 to NH3 under ambient conditions. The chemical mechanism of this catalysis at the active site FeMo-co [Fe7 S9 CMo(homocitrate)] is unknown. An obligatory co-product is H2 , while exogenous H2 is a competitive inhibitor. Isotopic substitution using exogenous D2 revealed the N2 -dependent reaction D2 +2H+ +2e- →2HD (the 'HD reaction'), together with a collection of additional experimental characteristics and requirements. This paper describes a detailed mechanism for the HD reaction, developed and elaborated using density functional simulations with a 486-atom model of the active site and surrounding protein. First D2 binds at one Fe atom (endo-Fe6 coordination position), where it is flanked by H-Fe6 (exo position) and H-Fe2 (endo position). Then there is synchronous transfer of these two H atoms to bound D2 , forming one HD bound to Fe2 and a second HD bound to Fe6. These two HD dissociate sequentially. The final phase is recovery of the two flanking H atoms. These H atoms are generated, sequentially, by translocation of a proton from the protein surface to S3B of FeMo-co and combination with introduced electrons. The first H atom migrates from S3B to exo-Fe6 and the second from S3B to endo-Fe2. Reaction energies and kinetic barriers are reported for all steps. This mechanism accounts for the experimental data: (a) stoichiometry; (b) the N2 -dependence results from promotional N2 bound at exo-Fe2; (c) different N2 binding Km for the HD reaction and the NH3 formation reaction results from involvement of two different sites; (d) inhibition by CO; (e) the non-occurrence of 2HD→H2 +D2 results from the synchronicity of the two transfers of H to D2 ; (f) inhibition of HD production at high pN2 is by competitive binding of N2 at endo-Fe6; (g) the non-leakage of D to solvent follows from the hydrophobic environment and irreversibility of proton introduction.

Biological nitrogen fixation in theory, practice, and reality: a perspective on the molybdenum nitrogenase system

Nitrogenase is the sole enzyme responsible for the ATP-dependent conversion of atmospheric dinitrogen into the bioavailable form of ammonia (NH₃ ), making this protein essential for the maintenance of the nitrogen cycle and thus life itself. Despite the widespread use of the Haber-Bosch process to industrially produce NH₃ , biological nitrogen fixation still accounts for half of the bioavailable nitrogen on Earth. An important feature of nitrogenase is that it operates under physiological conditions, where the equilibrium strongly favours ammonia production. This biological, multielectron reduction is a complex catalytic reaction that has perplexed scientists for decades. In this review, we explore the current understanding of the molybdenum nitrogenase system based on experimental and computational research, as well as the limitations of the crystallographic, spectroscopic, and computational techniques employed. Finally, essential outstanding questions regarding the nitrogenase system will be highlighted alongside suggestions for future experimental and computational work to elucidate this essential yet elusive process.

Role of Serine Coordination in the Structural and Functional Protection of the Nitrogenase P-Cluster

Nitrogenase catalyzes the multielectron reduction of dinitrogen to ammonia. Electron transfer in the catalytic protein (MoFeP) proceeds through a unique [8Fe-7S] cluster (P-cluster) to the active site (FeMoco). In the reduced, all-ferrous (PN) state, the P-cluster is coordinated by six cysteine residues. Upon two-electron oxidation to the P2+ state, the P-cluster undergoes conformational changes in which a highly conserved oxygen-based residue (a Ser or a Tyr) and a backbone amide additionally ligate the cluster. Previous studies of Azotobacter vinelandii (Av) MoFeP revealed that when the oxygen-based residue, βSer188, was mutated to a noncoordinating residue, Ala, the P-cluster became redox-labile and reversibly lost two of its eight Fe centers. Surprisingly, the Av strain with a MoFeP variant that lacked the serine ligand (Av βSer188Ala MoFeP) displayed the same diazotrophic growth and in vitro enzyme turnover rates as wild-type Av MoFeP, calling into question the necessity of this conserved ligand for nitrogenase function. Based on these observations, we hypothesized that βSer188 plays a role in protecting the P-cluster under nonideal conditions. Here, we investigated the protective role of βSer188 both in vivo and in vitro by characterizing the ability of Av βSer188Ala cells to grow under suboptimal conditions (high oxidative stress or Fe limitation) and by determining the tendency of βSer188Ala MoFeP to be mismetallated in vitro. Our results demonstrate that βSer188 (1) increases Av cell survival upon exposure to oxidative stress in the form of hydrogen peroxide, (2) is necessary for efficient Av diazotrophic growth under Fe-limiting conditions, and (3) may protect the P-cluster from metal exchange in vitro. Taken together, our findings suggest a structural adaptation of nitrogenase to protect the P-cluster via Ser ligation, which is a previously unidentified functional role of the Ser residue in redox proteins and adds to the expanding functional roles of non-Cys ligands to FeS clusters.

Incorporation of an Asymmetric Mo-Fe-S Cluster as an Artificial Cofactor into Nitrogenase

Nitrogenase employs a sophisticated electron transfer system and a Mo-Fe-S-C cofactor, designated the M-cluster [(cit)MoFe7 S9 C]), to reduce atmospheric N2 to bioaccessible NH3 . Previously, we have shown that the cofactor-free form of nitrogenase can be repurposed as a protein scaffold for the incorporation of a synthetic Fe-S cluster [Fe6 S9 (SEt)2 ]4- . Here, we demonstrate the utility of an asymmetric Mo-Fe-S cluster [Cp*MoFe5 S9 (SH)]3- as an alternative artificial cofactor upon incorporation into the cofactor-free nitrogenase scaffold. The resultant semi-artificial enzyme catalytically reduces C2 H2 to C2 H4 , and CN- into short-chain hydrocarbons, yet it is clearly distinct in activity from its [Fe6 S9 (SEt)2 ]4- -reconstituted counterpart, pointing to the possibility to employ molecular design and cluster synthesis strategies to further develop semi-artificial or artificial systems with desired catalytic activities.

Understanding the tethered unhooking and rehooking of S2B in the reaction domain of FeMo-co, the active site of nitrogenase

The active site of the nitrogen fixing enzyme nitrogenase is an Fe₇MoS₉C cluster, and investigations of the enigmatic chemical mechanism of the enzyme have focussed on a pair of Fe atoms, Fe2 and Fe6, and the S2B atom that bridges them. There are three proposals for the status of the Fe2-S2B-Fe6 bridge during the catalytic cycle: one that it remains intact, another that it is completely labile and absent during catalysis, and a third that S2B is hemilabile, unhooking one of its bonds to Fe2 or Fe6. This report examines the tethered unhooking of S2B and factors that affect it, using DFT calculations of 50 geometric/electronic possibilities with a 485 atom model including all relevant parts of surrounding protein. The outcomes are: (a) unhooking the S2B-Fe2 bond is feasible and favourable, but alternative unhooking of the S2B-Fe6 bond is unlikely for steric reasons, (b) energy differences between hooked and unhooked isomers are generally <10 kcal mol^-1, usually with unhooked more stable, (c) ligation at the exo-Fe6 position inhibits unhooking, (d) unhooking of hydrogenated S2B is more favourable than that of bare S2B, (e) hydrogen bonding from the NεH function of His195 to S2B occurs in hooked and unhooked forms, and possibly stabilises unhooking, (f) unhooking is reversible with kinetic barriers ranging 10-13 kcal mol^-1. The conclusion is that energetically accessible reversible unhooking of S2B or S2BH, as an intrinsic property of FeMo-co, needs to be considered in the formulation of mechanisms for the reactions of nitrogenase.

Calculating the chemical mechanism of nitrogenase: new working hypotheses

The enzyme nitrogenase converts N₂ to NH₃ with stoichiometry N₂ + 8H⁺ + 8e^- → 2NH₃ + H₂. The mechanism is chemically complex with multiple steps that must be consistent with much accumulated experimental information, including exchange of H₂ and N₂ and the N₂-dependent hydrogenation of D₂ to HD. Previous investigations have developed a collection of working hypotheses that guide ongoing density functional investigations of mechanistic steps and sequences. These include (i) hypotheses about the serial provision of protons and their conversion to H atoms bonded to S and Fe atoms of the FeMo-co catalytic site, (ii) the migration of H atoms over the surface of FeMo-co, (iii) the roles of His195, (iv) identification of three protein channels, one for the ingress of N₂, a separate pathway for the passage of exogenous H₂ (D₂) and product H₂ (HD), and a hydrophilic pathway for egress of product NH₃. Two additional working hypotheses are described in this paper. N₂ passing along the N₂ channel approaches and binds end-on to the exo coordination position of Fe2, with favourable energetics when FeMo-co is pre-hydrogenated. This exo-Fe2-N₂ is apparently not reduced but has a promotional role by expanding the reaction zone. A second N₂ can enter via the N₂ ingress channel and bind at the endo-Fe6 position, where it is surrounded by H atom donors suitable for the N₂ → NH₃ conversion. It is proposed that this endo-Fe6 position is also the binding site for H₂ (generated or exogenous), accounting for the competitive inhibition of N₂ reduction by H₂. The HD reaction occurs at the endo-Fe6 site, promoted by N₂ at the exo-Fe2 site. The second hypothesis concerns the most stable electronic states of FeMo-co with ligands bound at Fe2 and Fe6, and provides a protocol for management of electronic states in mechanism calculations.

Radical SAM-dependent formation of a nitrogenase cofactor core on NifB

Nitrogenase is a versatile metalloenzyme that reduces N2, CO and CO2 at its cofactor site. Designated the M-cluster, this complex cofactor has a composition of [(R-homocitrate)MoFe7S9C], and it is assembled through the generation of a unique [Fe8S9C] core prior to the insertion of Mo and homocitrate. NifB is a radical S-adenosyl-L-methionine (SAM) enzyme that is essential for nitrogenase cofactor assembly. This review focuses on the recent work that sheds light on the role of NifB in the formation of the [Fe8S9C] core of the nitrogenase cofactor, highlighting the structure, function and mechanism of this unique radical SAM methyltransferase.

Selenocyanate derived Se-incorporation into the Nitrogenase Fe protein cluster

The nitrogenase Fe protein mediates ATP-dependent electron transfer to the nitrogenase MoFe protein during nitrogen fixation, in addition to catalyzing MoFe protein-independent substrate (CO₂) reduction and facilitating MoFe protein metallocluster biosynthesis. The precise role(s) of the Fe protein Fe₄S₄ cluster in some of these processes remains ill-defined. Herein, we report crystallographic data demonstrating ATP-dependent chalcogenide exchange at the Fe₄S₄ cluster of the nitrogenase Fe protein when potassium selenocyanate is used as the selenium source, an unexpected result as the Fe protein cluster is not traditionally perceived as a site of substrate binding within nitrogenase. The observed chalcogenide exchange illustrates that this Fe₄S₄ cluster is capable of core substitution reactions under certain conditions, adding to the Fe protein’s repertoire of unique properties.

Many of the molecules that form the building blocks of life contain nitrogen. This element makes up most of the gas in the atmosphere, but in this form, it does not easily react, and most organisms cannot incorporate atmospheric nitrogen into biological molecules. To get around this problem, some species of bacteria produce an enzyme complex called nitrogenase that can transform nitrogen from the air into ammonia. This process is called nitrogen fixation, and it converts nitrogen into a form that can be used to sustain life.

The nitrogenase complex is made up of two proteins: the MoFe protein, which contains the active site that binds nitrogen, turning it into ammonia; and the Fe protein, which drives the reaction. Besides the nitrogen fixation reaction, the Fe protein is involved in other biological processes, but it was not thought to bind directly to nitrogen, or to any of the other small molecules that the nitrogenase complex acts on. The Fe protein contains a cluster of iron and sulfur ions that is required to drive the nitrogen fixation reaction, but the role of this cluster in the other reactions performed by the Fe protein remains unclear.

To better understand the role of this iron sulfur cluster, Buscagan, Kaiser and Rees used X-ray crystallography, a technique that can determine the structure of molecules. This approach revealed for the first time that when nitrogenase reacts with a small molecule called selenocyanate, the selenium in this molecule can replace the sulfur ions of the iron sulfur cluster in the Fe protein. Buscagan, Kaiser and Rees also demonstrated that the Fe protein could still incorporate selenium ions in the absence of the MoFe protein, which has traditionally been thought to provide the site essential for transforming small molecules.

These results indicate that the iron sulfur cluster in the Fe protein may bind directly to small molecules that react with nitrogenase. In the future, these findings could lead to the development of new molecules that artificially produce ammonia from nitrogen, an important process for fertilizer manufacturing. In addition, the iron sulfur cluster found in the Fe protein is also present in many other proteins, so Buscagan, Kaiser and Rees’ experiments may shed light on the factors that control other biological reactions.

Second and Outer Coordination Sphere Effects in Nitrogenase, Hydrogenase, Formate Dehydrogenase, and CO Dehydrogenase

Gases like H2, N2, CO2, and CO are increasingly recognized as critical feedstock in "green" energy conversion and as sources of nitrogen and carbon for the agricultural and chemical sectors. However, the industrial transformation of N2, CO2, and CO and the production of H2 require significant energy input, which renders processes like steam reforming and the Haber-Bosch reaction economically and environmentally unviable. Nature, on the other hand, performs similar tasks efficiently at ambient temperature and pressure, exploiting gas-processing metalloenzymes (GPMs) that bind low-valent metal cofactors based on iron, nickel, molybdenum, tungsten, and sulfur. Such systems are studied to understand the biocatalytic principles of gas conversion including N2 fixation by nitrogenase and H2 production by hydrogenase as well as CO2 and CO conversion by formate dehydrogenase, carbon monoxide dehydrogenase, and nitrogenase. In this review, we emphasize the importance of the cofactor/protein interface, discussing how second and outer coordination sphere effects determine, modulate, and optimize the catalytic activity of GPMs. These may comprise ionic interactions in the second coordination sphere that shape the electron density distribution across the cofactor, hydrogen bonding changes, and allosteric effects. In the outer coordination sphere, proton transfer and electron transfer are discussed, alongside the role of hydrophobic substrate channels and protein structural changes. Combining the information gained from structural biology, enzyme kinetics, and various spectroscopic techniques, we aim toward a comprehensive understanding of catalysis beyond the first coordination sphere.

Thermodynamically Favourable States in the Reaction of Nitrogenase without Dissociation of any Sulfide Ligand

We have used combined quantum mechanical and molecular mechanical (QM/MM) calculations to study the reaction mechanism of nitrogenase, assuming that none of the sulfide ligands dissociates. To avoid the problem that there is no consensus regarding the structure and protonation of the E₄ state, we start from a state where N₂ is bound to the cluster and is protonated to N₂H₂, after dissociation of H₂. We show that the reaction follows an alternating mechanism with HNNH (possibly protonated to HNNH₂) and H₂NNH₂ as intermediates and the two NH₃ products dissociate at the E₇ and E₈ levels. For all intermediates, coordination to Fe6 is preferred, but for the E₄ and E₈ intermediates, binding to Fe2 is competitive. For the E₄, E₅ and E₇ intermediates we find that the substrate may abstract a proton from the hydroxy group of the homocitrate ligand of the FeMo cluster, thereby forming HNNH₂, H₂NNH₂ and NH₃ intermediates. This may explain why homocitrate is a mandatory component of nitrogenase. All steps in the suggested reaction mechanism are thermodynamically favourable compared to protonation of the nearby His‐195 group and in all cases, protonation of the NE2 atom of the latter group is preferred.

Cysteine-Activated Small-Molecule H2Se Donors Inspired by Synthetic H2S Donors

The importance of selenium (Se) in biology and health has become increasingly clear. Hydrogen selenide (H₂Se), the biologically available and active form of Se, is suggested to be an emerging nitric oxide (NO)-like signaling molecule. Nevertheless, the research on H₂Se chemical biology has technique difficulties due to the lack of well-characterized and controllable H₂Se donors under physiological conditions, as well as a robust assay for direct H₂Se quantification. Motivated by these needs, here, we demonstrate that selenocyclopropenones and selenoamides are tunable donor motifs that release H₂Se upon reaction with cysteine (Cys) at pH 7.4 and that structural modifications enable the rate of Cys-mediated H₂Se release to be tuned. We monitored the reaction pathways for the H₂Se release and confirmed H₂Se generation qualitatively using different methods. We further developed a quantitative assay for direct H₂Se trapping and quantitation in an aqueous solution, which should also be operative for investigating future H₂Se donor motifs. In addition, we demonstrate that arylselenoamide has the capability of Cys-mediated H₂Se release in cellular environments. Importantly, mechanistic investigations and density functional theory (DFT) calculations illustrate the plausible pathways of Cys-activated H₂Se release from arylselenoamides in detail, which may help understand the mechanistic issues of the H₂S release from pharmacologically important arylthioamides. We anticipate that the well-defined chemistries of Cys-activated H₂Se donor motifs will be useful for studying Se biology and for development of new H₂Se donors and bioconjugate techniques.

Statistical analysis of PN clusters in Mo/VFe protein crystals using a bond valence method toward their electronic structures

Nowadays, large numbers of MoFe proteins have been reported and their crystal data obtained by X-ray crystallography and uploaded to the Protein Data Bank (PDB). By big data analysis using a bond valence method, we make conclusions based on 79 selected PN in all 119 P-clusters of 53 MoFe proteins and 10 P-clusters of 5 VFe proteins from all deposited crystallographic data of the PDB. In the condition of MoFe protein crystals, the resting state PN clusters are proposed to have the formal oxidation state of 2Fe(iii)6Fe(ii), hiding two oxidized electron holes with high electron delocalization. The calculations show that Fe1, Fe2, Fe5, Fe6 and Fe7 perform unequivocally as Fe2+, and Fe3 is remarkably prone to Fe(iii), while Fe4 and Fe8 have different degrees of mixed valences. For PN clusters in VFe protein crystals, Fe1, Fe2, Fe4, Fe5 and Fe6 tend to be Fe2+, but the electron distributions rearrange with Fe7 and Fe8 being more oxidized mixed valences, and Fe3 presenting a little more reductive mixed valence than that in MoFe proteins. In terms of spatial location, Fe3 and Fe6 in P-clusters of MoFe proteins are calculated as the most oxidized and reduced irons, which have the shortest distances from homocitrate in the FeMo-cofactor and [Fe4S4] cluster, respectively, and thus could function as potential electron transport sites. This work shows different electron distributions of PN clusters in Mo/VFe protein crystals, from those obtained from previous data from solution with excess reducing agent from which it was concluded that PN clusters are all ferrous according to Mössbauer and electron paramagnetic resonance spectra.

Selenium Valence-to-Core X-ray Emission Spectroscopy and Kβ HERFD X-ray Absorption Spectroscopy as Complementary Probes of Chemical and Electronic Structure

Selenium X-ray absorption spectroscopy (XAS) has found widespread use in investigations of Se-containing materials, geochemical processes, and biologically active sites. In contrast to sulfur Kβ X-ray emission spectroscopy (XES), which has been found to contain electronic and structural information complementary to S XAS, Se Kβ XES remains comparatively underexplored. Herein, we present the first Se Valence-to-Core (VtC) XES studies of reduced Se-containing compounds and FeSe dimers. Se VtC XES is found to be sensitive to changes in covalent Se bonding interactions (Se–Se/Se–C/Se–H bonding) while being relatively insensitive to changes in Fe oxidation states as selenide bridges in FeSe dimers ([Fe₂Se₂]²⁺ vs [Fe₂Se₂]⁺). In contrast, Se Kβ HERFD XAS is demonstrated to be quite sensitive to changes in the Fe oxidation state with Se Kβ HERFD XAS demonstrating experimental resolution equivalent to Kα HERFD XAS. Additionally, computational studies reveal both Se VtC XES and XAS to be sensitive to selenium protonation in FeSe complexes.

Selenium is a trace element that plays vital roles in biological and geochemical cycles, energy storage, photovoltaics, and nanomaterials. Herein, selenium Valence-to-Core X-ray emission spectroscopy is explored as a new method of probing the chemical and electronic structure in selenium-containing compounds, demonstrating sensitivity to selenium bonding interactions. When paired with high-resolution Se X-ray absorption spectroscopy (HERFD XAS), these two methods have the potential to reveal greater insight into protonation and redox changes of Se-substituted FeS clusters.

Comparisons of bond valences and distances for CO- and N2-bound clusters of FeMo-cofactors

By comparisons of N2 and isoelectronic substrate CO bound FeMo-cofactors (FeMo-cos) in nitrogenases, we have used a classical bond valence method to calculate the oxidation states of the iron and molybdenum atoms in FeMo-cos.

Structures and reaction dynamics of N2 and H2 binding at FeMo-co, the active site of nitrogenase

The chemical reactions occurring at the Fe₇MoS₉C(homocitrate) cluster, FeMo-co, the active site of the enzyme nitrogenase (N₂ → NH₃), are enigmatic. Experimental information collected over a long period reveals aspects of the roles of N₂ and H₂, each with more than one type of reactivity. This paper reports investigations of the binding of H₂ and N₂ at intact FeMo-co, using density functional simulations of a large 486 atom relevant portion of the protein, resulting in 27 new structures containing H₂ and/or N₂ bound at the exo and endo coordination sites of the participating Fe atoms, Fe2 and Fe6. Binding energies and transition states for association/dissociation are determined, and trajectories for the approach, binding and separation of H₂/N₂ are described, including diffusion of these small molecules through proximal protein. Influences of surrounding amino acids are identified. FeMo-co deforms geometrically when binding H₂ or N₂, and a procedure for calculating the energy cost involved, the adaptation energy, is introduced here. Adaptation energies, which range from 7 to 36 kcal mol^-1 for the reported structures, are influenced by the protonation state of the His195 side chain. Seven N₂ structures and three H₂ structures have negative binding free energies, which include the estimated entropy penalties for binding of N₂, H₂ from proximal protein. These favoured structures have N₂ bound end-on at exo-Fe2, exo-Fe6 and endo-Fe2 positions of FeMo-co, and H₂ bound at the endo-Fe2 position. Various postulated structures with N₂ bridging Fe2 and Fe6 revert to end-on-N₂ at endo positions. The structures are also assessed via the calculated potential energy barriers for association and dissociation. Barriers to the binding of H₂ range from 1 to 20 kcal mol^-1 and barriers to dissociation of H₂ range from 3 to 18 kcal mol^-1. Barriers to the binding of N₂, in either side-on or end-on mode, range from 2 to 18 kcal mol^-1, while dissociation of bound N₂ encounters barriers of 3 to 8 kcal mol^-1 for side-on bonding and 7 to 18 kcal mol^-1 for end-on bonding. These results allow formulation of mechanisms for the H₂/N₂ exchange reaction, and three feasible mechanisms for associative exchange and three for dissociative exchange are identified. Consistent electronic structures and potential energy surfaces are maintained throughout. Changes in the spin populations of Fe2 and Fe6 connected with cluster deformation and with metal-ligand bond formation are identified.

Partial synthetic models of FeMoco with sulfide and carbyne ligands: Effect of interstitial atom in nitrogenase active site

Nitrogen-fixing organisms perform dinitrogen reduction to ammonia at an Fe-M (M = Mo, Fe, or V) cofactor (FeMco) of nitrogenase. FeMco displays eight metal centers bridged by sulfides and a carbide having the MFe₇S₈C cluster composition. The role of the carbide ligand, a unique motif in protein active sites, remains poorly understood. Toward addressing how the carbon bridge affects the physical and chemical properties of the cluster, we isolated synthetic models of subsite MFe₃S₃C displaying sulfides and a chelating carbyne ligand. We developed synthetic protocols for structurally related clusters, [Tp*M'Fe₃S₃X]^n-, where M' = Mo or W, the bridging ligand X = CR, N, NR, S, and Tp* = Tris(3,5-dimethyl-1-pyrazolyl)hydroborate, to study the effects of the identity of the heterometal and the bridging X group on structure and electrochemistry. While the nature of M' results in minor changes, the chelating, μ₃-bridging carbyne has a large impact on reduction potentials, being up to 1 V more reducing compared to nonchelating N and S analogs.

Carbon Monoxide Binding to the Iron-Molybdenum Cofactor of Nitrogenase: a Detailed Quantum Mechanics/Molecular Mechanics Investigation

Carbon monoxide (CO) is a well-known inhibitor of nitrogenase activity. Under turnover conditions, CO binds to FeMoco, the active site of Mo nitrogenase. Time-resolved IR measurements suggest an initial terminal CO at 1904 cm^-1 that converts to a bridging CO at 1715 cm^-1, and an X-ray structure shows that CO can displace one of the bridging belt sulfides of FeMoco. However, the CO-binding redox state(s) of FeMoco (E_n) and the role of the protein environment in stabilizing specific CO-bound intermediates remain elusive. In this work, we carry out an in-depth analysis of the CO-FeMoco interaction based on quantum chemical calculations addressing different aspects of the electronic structure. (1) The local electronic structure of the Fe-CO bond is studied through diamagnetically substituted FeMoco. (2) A cluster model of FeMoco within a polarizable continuum illustrates how CO binding may affect the spin-coupling between the metal centers. (3) A QM/MM model incorporates the explicit influence of the amino acid residues surrounding FeMoco in the MoFe protein. The QM/MM model predicts both a terminal and a bridging CO in the E₁ redox state. The scaled calculated CO frequencies (1922 and 1716 cm^-1, respectively) are in good agreement with the experimentally observed IR bands supporting CO binding to the E₁ state. Alternatively, an E₂ state QM/MM model, which has the same atomic structure as the CO-bound X-ray structure, features a semi-bridging CO with a scaled calculated frequency (1718 cm^-1) similar to the bridging CO in the E₁ model.

The E2 state of FeMoco: Hydride Formation versus Fe Reduction and a Mechanism for H2 Evolution

The iron‐molybdenum cofactor (FeMoco) is responsible for dinitrogen reduction in Mo nitrogenase. Unlike the resting state, E₀, reduced states of FeMoco are much less well characterized. The E₂ state has been proposed to contain a hydride but direct spectroscopic evidence is still lacking. The E₂ state can, however, relax back the E₀ state via a H₂ side‐reaction, implying a hydride intermediate prior to H₂ formation. This E₂→E₀ pathway is one of the primary mechanisms for H₂ formation under low‐electron flux conditions. In this study we present an exploration of the energy surface of the E₂ state. Utilizing both cluster‐continuum and QM/MM calculations, we explore various classes of E₂ models: including terminal hydrides, bridging hydrides with a closed or open sulfide‐bridge, as well as models without. Importantly, we find the hemilability of a protonated belt‐sulfide to strongly influence the stability of hydrides. Surprisingly, non‐hydride models are found to be almost equally favorable as hydride models. While the cluster‐continuum calculations suggest multiple possibilities, QM/MM suggests only two models as contenders for the E₂ state. These models feature either i) a bridging hydride between Fe₂ and Fe₆ and an open sulfide‐bridge with terminal SH on Fe₆ (E₂‐hyd) or ii) a double belt‐sulfide protonated, reduced cofactor without a hydride (E₂‐nonhyd). We suggest both models as contenders for the E₂ redox state and further calculate a mechanism for H₂ evolution. The changes in electronic structure of FeMoco during the proposed redox‐state cycle, E₀→E₁→E₂→E₀, are discussed.

Tracing the incorporation of the "ninth sulfur" into the nitrogenase cofactor precursor with selenite and tellurite

The Mo-nitrogenase catalyzes the reduction of N₂ to NH₃ at its cofactor, an [(R-homocitrate)MoFe₇S₉C] cluster synthesized via the formation of a [Fe₈S₉C] L-cluster prior to the insertion of Mo and homocitrate. Previously, we have identified a [Fe₈S₈C] L*-cluster, which is homologous to the core structure of the L-cluster but lacks the ‘9^th sulfur’ in the belt region. However, direct evidence and mechanistic details of the L*- to L-cluster conversion upon ‘9^th sulfur’ insertion remain elusive. Here, we trace the ‘9^th sulfur’ insertion using SeO₃²⁻ and TeO₃²⁻ as ‘labeled’ SO₃²⁻. Biochemical, EPR and XAS/EXAFS studies suggest a role of the ‘9^th sulfur’ in cluster transfer during cofactor biosynthesis while revealing the incorporation of Se²⁻- and Te²⁻-like species into the L-cluster. DFT calculations further point to a plausible mechanism involving in-situ reduction of SO₃²⁻ to S²⁻, thereby suggesting the utility of this reaction to label the catalytically-important belt region for mechanistic investigations of nitrogenase.

Structure, reactivity, and spectroscopy of nitrogenase-related synthetic and biological clusters

The reduction of dinitrogen (N2) is essential for its incorporation into nucleic acids and amino acids, which are vital to life on earth. Nitrogenases convert atmospheric dinitrogen to two ammonia molecules (NH3) under ambient conditions. The catalytic active sites of these enzymes (known as FeM-cofactor clusters, where M = Mo, V, Fe) are the sites of N2 binding and activation and have been a source of great interest for chemists for decades. In this review, recent studies on nitrogenase-related synthetic molecular complexes and biological clusters are discussed, with a focus on their reactivity and spectroscopic characterization. The molecular models that are discussed span from simple mononuclear iron complexes to multinuclear iron complexes and heterometallic iron complexes. In addition, recent work on the extracted biological cofactors is discussed. An emphasis is placed on how these studies have contributed towards our understanding of the electronic structure and mechanism of nitrogenases.

Two ligand-binding sites in CO-reducing V nitrogenase reveal a general mechanistic principle

Besides its role in biological nitrogen fixation, vanadium-containing nitrogenase also reduces carbon monoxide (CO) to hydrocarbons, in analogy to the industrial Fischer-Tropsch process. The protein yields 93% of ethylene (C₂H₄), implying a C-C coupling step that mandates the simultaneous binding of two CO at the active site FeV cofactor. Spectroscopic data indicated multiple CO binding events, but structural analyses of Mo and V nitrogenase only confirmed a single site. Here, we report the structure of a two CO-bound state of V nitrogenase at 1.05 Å resolution, with one μ-bridging and one terminal CO molecule. This additional, specific ligand binding site suggests a mechanistic route for CO reduction and hydrocarbon formation, as well as a second access pathway for protons required during the reaction. Moreover, carbonyls are strong-field ligands that are chemically similar to mechanistically relevant hydrides that may be formed and used in a fully analogous fashion.

A Molecular Low-Coordinate [Fe-S-Fe] Unit in Three Oxidation States

A [Fe-S-Fe] subunit with a single sulfide bridging two low-coordinate iron ions is the supposed active site of the iron-molybdenum co-factor (FeMoco) of nitrogenase. Here we report a dinuclear monosulfido bridged diiron(II) complex with a similar complex geometry that can be oxidized stepwise to diiron(II/III) and diiron(III/III) complexes while retaining the [Fe-S-Fe] core. The series of complexes has been characterized crystallographically, and electronic structures have been studied using, inter alia, 57 Fe Mössbauer spectroscopy and SQUID magnetometry. Further, cleavage of the [Fe-S-Fe] unit by CS2 is presented.

Postbiosynthetic modification of a precursor to the nitrogenase iron-molybdenum cofactor

Nitrogenases utilize Fe-S clusters to reduce N₂ to NH₃ The large number of Fe sites in their catalytic cofactors has hampered spectroscopic investigations into their electronic structures, mechanisms, and biosyntheses. To facilitate their spectroscopic analysis, we are developing methods for incorporating ⁵⁷Fe into specific sites of nitrogenase cofactors, and we report herein site-selective ⁵⁷Fe labeling of the L-cluster-a carbide-containing, [Fe₈S₉C] precursor to the Mo nitrogenase catalytic cofactor. Treatment of the isolated L-cluster with the chelator ethylenediaminetetraacetate followed by reconstitution with ⁵⁷Fe²⁺ results in ⁵⁷Fe labeling of the terminal Fe sites in high yield and with high selectivity. This protocol enables the generation of L-cluster samples in which either the two terminal or the six belt Fe sites are selectively labeled with ⁵⁷Fe. Mössbauer spectroscopic analysis of these samples bound to the nitrogenase maturase Azotobacter vinelandii NifX reveals differences in the primary coordination sphere of the terminal Fe sites and that one of the terminal sites of the L-cluster binds to H35 of Av NifX. This work provides molecular-level insights into the electronic structure and biosynthesis of the L-cluster and introduces postbiosynthetic modification as a promising strategy for studies of nitrogenase cofactors.

Structural Characterization of Two CO Molecules Bound to the Nitrogenase Active Site

As an approach towards unraveling the nitrogenase mechanism, we have studied the binding of CO to the active-site FeMo-cofactor. CO is not only an inhibitor of nitrogenase, but it is also a substrate, undergoing reduction to hydrocarbons (Fischer-Tropsch-type chemistry). The C-C bond forming capabilities of nitrogenase suggest that multiple CO or CO-derived ligands bind to the active site. Herein, we report a crystal structure with two CO ligands coordinated to the FeMo-cofactor of the molybdenum nitrogenase at 1.33 Å resolution. In addition to the previously observed bridging CO ligand between Fe2 and Fe6 of the FeMo-cofactor, a new ligand binding mode is revealed through a second CO ligand coordinated terminally to Fe6. While the relevance of this state to nitrogenase-catalyzed reactions remains to be established, it highlights the privileged roles for Fe2 and Fe6 in ligand binding, with multiple coordination modes available depending on the ligand and reaction conditions.