Electro-mediated PhotoRedox Catalysis for Selective C(sp3 )-O Cleavages of Phosphinated Alcohols to Carbanions

Synthesis, Characterization, and Properties of Sila-Annulated Phenanthrene Imides

A series of sila-annulated phenanthrene imides were synthesized through a three-step synthetic route, which represent a hybrid class of biphenyl-based π-conjugated molecules incorporating an imide unit and silole. A comprehensive investigation of their structural, photophysical, and electronic properties was studied by experiment and theoretical calculations. Notably, sila-annulated phenanthrene imides with significant aggregation-induced emission (AIE) properties were observed.

Electrophotocatalytic hydrogenation of imines and reductive functionalization of aryl halides

The open-shell catalytically active species, like radical cations or radical anions, generated by one-electron transfer of precatalysts are widely used in energy-consuming redox reactions, but their excited-state lifetimes are usually short. Here, a closed-shell thioxanthone-hydrogen anion species (3), which can be photochemically converted to a potent and long-lived reductant, is generated under electrochemical conditions, enabling the electrophotocatalytic hydrogenation. Notably, TfOH can regulate the redox potential of the active species in this system. In the presence of TfOH, precatalyst (1) reduction can occur at low potential, so that competitive H2 evolution can be inhibited, thus effectively promoting the hydrogenation of imines. In the absence of TfOH, the reducing ability of the system can reach a potency even comparable to that of Na0 or Li0, thereby allowing the hydrogenation, borylation, stannylation and (hetero)arylation of aryl halides to construct C-H, C-B, C-Sn, and C-C bonds.

Photo- and electro-chemical strategies for the activations of strong chemical bonds

The employment of light and/or electricity - alternatively to conventional thermal energy - unlocks new reactivity paradigms as tools for chemical substrate activations. This leads to the development of new synthetic reactions and a vast expansion of chemical spaces. This review summarizes recent developments in photo- and/or electrochemical activation strategies for the functionalization of strong bonds - particularly carbon-heteroatom (C-X) bonds - via: (1) direct photoexcitation by high energy UV light; (2) activation via photoredox catalysis under irradiation with relatively lower energy UVA or blue light; (3) electrochemical reduction; (4) combination of photocatalysis and electrochemistry. Based on the types of the targeted C-X bonds, various transformations ranging from hydrodefunctionalization to cross-coupling are covered with detailed discussions of their reaction mechanisms.

Electron-Poor Acridones and Acridiniums as Super Photooxidants in Molecular Photoelectrochemistry by Unusual Mechanisms

Electron-deficient acridones and in situ generated acridinium salts are reported as potent, closed-shell photooxidants that undergo surprising mechanisms. When bridging acyclic triarylamine catalysts with a carbonyl group (acridones), this completely diverts their behavior away from open-shell, radical cationic, 'beyond diffusion' photocatalysis to closed-shell, neutral, diffusion-controlled photocatalysis. Brønsted acid activation of acridones dramatically increases excited state oxidation power (by +0.8 V). Upon reduction of protonated acridones, they transform to electron-deficient acridinium salts as even more potent photooxidants (*E1/2 =+2.56-3.05 V vs SCE). These oxidize even electron-deficient arenes where conventional acridinium salt photooxidants have thusfar been limited to electron-rich arenes. Surprisingly, upon photoexcitation these electron-deficient acridinium salts appear to undergo two electron reductive quenching to form acridinide anions, spectroscopically-detected as their protonated forms. This new behaviour is partly enabled by a catalyst preassembly with the arene, and contrasts to conventional SET reductive quenching of acridinium salts. Critically, this study illustrates how redox active chromophoric molecules initially considered photocatalysts can transform during the reaction to catalytically active species with completely different redox and spectroscopic properties.

Solvent Dependency of Catalyst-Substrate Aggregation Through π-π Stacking in Photoredox Catalysis

Assemblies of photoredox catalysts and their target substrates prior to photoexcitation is a phenomenon naïvely overlooked by the majority of synthetic chemists, but can have profound influences on reactivity and selectivity in photocatalytic reactions. In this study, we determine the aggregation states of triarylamine radical cationic photocatalysts with various target arene substrates in different solvents by specifically parameterized polarizable molecular dynamics simulations. A π-stacking interaction previously implicated by more expensive, less-representative quantum calculations is confirmed. Critically, this study presents new insights on: i) the ability of solvents (MeCN vs DMF) to make or break a photocatalytic reaction by promoting (MeCN) or demoting (DMF) its catalyst-substrate assemblies, which is a determining factor for reactivity, ii) the average "lifetimes" of assemblies in solution from a dynamic simulation. We find that both in the ground state and the photoexcited state, the cationic radical assemblies remain intact for periods often higher than 60 ps, rendering them ideally suitable to undergo intra-assembly electron transfer reactions upon photoexcitation. Such aspects have not addressed by previous studies on synthetic photocatalytic reactions involving non-covalent assemblies.

Photoelectrochemical oxidative C(sp3)-H borylation of unactivated hydrocarbons

Organoboron compounds are of high significance in organic synthesis due to the unique versatility of boryl substituents to access further modifications. The high demand for the incorporation of boryl moieties into molecular structures has witnessed significant progress, particularly in the C(sp3)-H borylation of hydrocarbons. Taking advantage of special characteristics of photo/electrochemistry, we herein describe the development of an oxidative C(sp3)-H borylation reaction under metal- and oxidant-free conditions, enabled by photoelectrochemical strategy. The reaction exhibits broad substrate scope (>57 examples), and includes the use of simple alkanes, halides, silanes, ketones, esters and nitriles as viable substrates. Notably, unconventional regioselectivity of C(sp3)-H borylation is achieved, with the coupling site of C(sp3)-H borylation selectively located in the distal methyl group. Our method is operationally simple and easily scalable, and offers a feasible approach for the one-step synthesis of high-value organoboron building blocks from simple hydrocarbons, which would provide ample opportunities for drug discovery.

Electrochemical Late-Stage Functionalization

Late-stage functionalization (LSF) constitutes a powerful strategy for the assembly or diversification of novel molecular entities with improved physicochemical or biological activities. LSF can thus greatly accelerate the development of medicinally relevant compounds, crop protecting agents, and functional materials. Electrochemical molecular synthesis has emerged as an environmentally friendly platform for the transformation of organic compounds. Over the past decade, electrochemical late-stage functionalization (eLSF) has gained major momentum, which is summarized herein up to February 2023.

Ketyl Radical Coupling Enabled by Polycyclic Aromatic Hydrocarbon Electrophotocatalysts

Herein, we report a new class of electrophotocatalysts, polycyclic aromatic hydrocarbons, that promote the reduction of unactivated carbonyl compounds to generate versatile ketyl radical intermediates. This catalytic platform enables previously challenging intermolecular ketyl radical coupling reactions, including those that classic reductants (e.g., SmI2/HMPA) have failed to promote. More broadly, this study outlines an approach to fundamentally expand the array of reactive radical intermediates that can be generated via electrophotocatalysis by obviating the need for rapid mesolytic cleavage following substrate reduction.

Photoelectrochemical Asymmetric Catalysis Enables Enantioselective Heteroarylcyanation of Alkenes via C-H Functionalization

The asymmetric difunctionalization of alkenes, a method transforming readily accessible alkenes into enantioenriched chiral structures of high value, has long been a focal point of organic synthesis. Despite tremendous efforts in this domain, it remains a considerable challenge to devise enantioselective oxidative dicarbofunctionalization of alkenes, even though these transformations can utilize stable and unfunctionalized functional group donors. In this context, we report herein a photoelectrocatalytic method for the enantioselective heteroarylcyanation of aryl alkenes, which employs unfunctionalized heteroarenes through C-H functionalization. The photoelectrochemical asymmetric catalysis (PEAC) method combines photoredox catalysis and asymmetric electrocatalysis to facilitate the formation of two C-C bonds operating via hydrogen (H2) evolution and obviating the need for external chemical oxidants.

Photoredox catalysis harvesting multiple photon or electrochemical energies

Photoredox catalysis (PRC) is a cutting-edge frontier for single electron-transfer (SET) reactions, enabling the generation of reactive intermediates for both oxidative and reductive processes via photon activation of a catalyst. Although this represents a significant step towards chemoselective and, more generally, sustainable chemistry, its efficacy is limited by the energy of visible light photons. Nowadays, excellent alternative conditions are available to overcome these limitations, harvesting two different but correlated concepts: the use of multi-photon processes such as consecutive photoinduced electron transfer (conPET) and the combination of photo- and electrochemistry in synthetic photoelectrochemistry (PEC). Herein, we review the most recent contributions to these fields in both oxidative and reductive activations of organic functional groups. New opportunities for organic chemists are captured, such as selective reactions employing super-oxidants and super-reductants to engage unactivated chemical feedstocks, and scalability up to gram scales in continuous flow. This review provides comparisons between the two techniques (multi-photon photoredox catalysis and PEC) to help the reader to fully understand their similarities, differences and potential applications and to therefore choose which method is the most appropriate for a given reaction, scale and purpose of a project.

Shining Fresh Light on Complex Photoredox Mechanisms through Isolation of Intermediate Radical Anions

Photoredox catalysis (PRC) has gained enormous and wide-ranging interest in recent years but has also been subject to significant mechanistic uncertainty, even controversy. To provide a method by which the missing understanding can begin to be filled in, we demonstrate herein that it is possible to isolate as authentic materials the one-electron reduction products of representative PRC catalysts (PCs). Specifically, KC₈ reduction of both 9,10-dicyanoanthracene and a naphthalene monoamide derivative in the presence of a cryptand provides convenient access to the corresponding [K(crypt)⁺][PC^·-] salts as clean materials that can be fully characterized by techniques including EPR and XRD. Because PC^·- states are key intermediates in PRC reactions, such isolation allows for highly controlled study of these anions' specific reactivity and hence their mechanistic roles. As a demonstration of this principle, we show that these salts can be used to conveniently interrogate the mechanisms of recent, high-profile "conPET" and "e-PRC" reactions, which are currently the subject of both significant interest and acute controversy. Using very simple experiments, we are able to provide striking insights into these reactions' underlying mechanisms and to observe surprising levels of hidden complexity that would otherwise have been very challenging to identify and that emphasize the care and control that are needed when interrogating and interpreting PRC mechanisms. These studies provide a foundation for the study of a far broader range of questions around conPET, e-PRC, and other PRC reaction mechanisms in the future, using the same strategy of PC^·- isolation.

Practical and General Alcohol Deoxygenation Protocol

Herein, we describe a practical protocol for the removal of alcohol functional groups through reductive cleavage of their benzoate ester analogs. This transformation requires a strong single electron transfer (SET) reductant and a means to accelerate slow fragmentation following substrate reduction. To accomplish this, we developed a photocatalytic system that generates a potent reductant from formate salts alongside Brønsted or Lewis acids that promote fragmentation of the reduced intermediate. This deoxygenation procedure is effective across structurally and electronically diverse alcohols and enables a variety of difficult net transformations. This protocol requires no precautions to exclude air or moisture and remains efficient on multigram scale. Finally, the system can be adapted to a one-pot benzoylation-deoxygenation sequence to enable direct alcohol deletion. Mechanistic studies validate that the role of acidic additives is to promote the key C(sp3 )-O bond fragmentation step.

Transient absorption spectroscopy based on uncompressed hollow core fiber white light proves pre-association between a radical ion photocatalyst and substrate

We present a hollow-core fiber (HCF) based transient absorption experiment, with capabilities beyond common titanium:sapphire based setups. By spectral filtering of the HCF spectrum, we provide pump pulses centered at 425 nm with several hundred nJ of pulse energy at the sample position. By employing the red edge of the HCF output for seeding CaF₂, we obtain smooth probing spectra in the range between 320 and 900 nm. We demonstrate the capabilities of our experiment by following the ultrafast relaxation dynamics of a radical cationic photocatalyst to prove its pre-association with an arene substrate, a phenomenon that was not detectable previously by steady-state spectroscopic techniques. The detected preassembly rationalizes the successful participation of radical ionic photocatalysts in single electron transfer reactions, a notion that has been subject to controversy in recent years.

Contemporary photoelectrochemical strategies and reactions in organic synthesis

In recent years, with the development of organic synthetic chemistry, a variety of organic synthetic methods have been discovered and applied in practical production. Photochemistry and electrochemistry have been widely used in organic synthesis recently due to their advantages such as mild conditions and green and environmental protection and have now been developed into two of the most massive synthetic strategies in the field of organic synthesis. In order to further enhance the potential of photochemistry and electrochemistry and to overcome the limitations of each, organic synthetic chemists have worked to combine the two synthetic strategies together to develop photoelectrochemistry as a new synthetic method. Photoelectrochemistry achieves the complementary advantages and disadvantages of photochemistry and electrochemistry, avoids the problem of using stoichiometric oxidants or reductants in photochemistry and easy dimerization in electrochemistry, generates highly reactive reaction intermediates under mild conditions, and achieves reactions that are difficult to accomplish by single photochemistry or electrochemistry. This review summarizes the research progress in the field of photoelectrochemistry from the perspective of photoelectro-chemical catalysts in recent years, analyzes the catalytic mechanism of various catalysts in detail, and gives a brief outlook on the research direction and development prospects in this field.

A guide to organic electroreduction using sacrificial anodes

Organic electrosynthesis is a green strategy for the synthesis of valuable molecules. Electrochemical reactions using sacrificial metal anodes enable new reactivity to be uncovered that could not be achieved with traditional non-electrochemical methods. Compared with reactions using metal powder as the reducing reagent, the mild electroreduction protocols usually exhibit diverse reactivity and excellent selectivity. The inexpensive metal anodes possess low oxidation potential, which could prevent undesired overoxidation of substrates, active intermediates and products. The in situ generated metal ions from sacrificial anodes could not only serve as Lewis acids to activate the reactants but also as a promoter or mediator. This tutorial review highlights the recent achievements in this rapidly growing area within the past five years. The sacrificial anode-enabled electroreductions are discussed according to the reaction type.

Electrosynthetic C-O Bond Activation in Alcohols and Alcohol Derivatives

Alcohols and their derivatives are ubiquitous and versatile motifs in organic synthesis. Deoxygenative transformations of these compounds are often challenging due to the thermodynamic penalty associated with the cleavage of the C-O bond. However, electrochemically driven redox events have been shown to facilitate the C-O bond cleavage in alcohols and their derivatives either through direct electron transfer or through the use of electron transfer mediators and electroactive catalysts. Herein, a comprehensive overview of preparative electrochemically mediated protocols for C-O bond activation and functionalization is detailed, including direct and indirect electrosynthetic methods, as well as photoelectrochemical strategies.

Electrophotochemical Metal-Catalyzed Enantioselective Decarboxylative Cyanation

In contrast to the rapid growth of electrophotocatalysis in recent years, enantioselective catalytic reactions powered by this unique methodology remain rare. In this work, we report an electrophotochemical metal-catalyzed protocol for direct asymmetric decarboxylative cyanation of aliphatic carboxylic acids. The synergistic merging of electrophotochemical cerium catalysis and asymmetric electrochemical copper catalysis permits mild reaction conditions for the formation and utilization of the key carbon centered radicals by combining the power of light and electrical energy. Electrophotochemical cerium catalysis enables radical decarboxylation to produce alkyl radicals, which could be effectively intercepted by asymmetric electrochemical copper catalysis for the construction of C-CN bonds in a highly stereoselective fashion. This environmentally benign method smoothly converts a diverse array of arylacetic acids into the corresponding alkyl nitriles in good yields and enantioselectivities without using chemical oxidants or pre-functionalization of the acid substrates and can be readily scaled up.

Unravelling the Effect of Water Addition in Consecutive Photocatalysis with Naphthalene Diimide

We describe the effect of water addition in the catalyst performance for a C-H functionalization of benzene. Improved yields and selectivity were achieved in a consecutive photoredox catalysis in contrast to the reaction without water. Mechanistic analysis demonstrated this is due to a better catalyst stability and faster kinetic rather than a change in the different steps of the mechanism. The addition of water constitutes a convenient approach to improve catalyst performance, and it was also observed with other catalysts.

Benzoates as photosensitization catalysts and auxiliaries in efficient, practical, light-powered direct C(sp3)-H fluorinations

Of the methods for direct fluorination of unactivated C(sp3)-H bonds, photosensitization of SelectFluor is a promising approach. Although many substrates can be activated with photosensitizing catalysts, issues remain that hamper fluorination of complex molecules. Alcohol- or amine-containing functional groups are not tolerated, fluorination regioselectivity follows factors endogenous to the substrate and cannot be influenced by the catalyst, and reactions are highly air-sensitive. We report that benzoyl groups serve as highly efficient photosensitizers which, in combination with SelectFluor, enable visible light-powered direct fluorination of unactivated C(sp3)-H bonds. Compared to previous photosensitizer architectures, the benzoyls have versatility to function both (i) as a photosensitizing catalyst for simple substrate fluorinations and (ii) as photosensitizing auxiliaries for complex molecule fluorinations that are easily installed and removed without compromising yield. Our auxiliary approach (i) substantially decreases the reaction's induction period, (ii) enables C(sp3)-H fluorination of many substrates that fail under catalytic conditions, (iii) increases kinetic reproducibility, and (iv) promotes reactions to higher yields, in shorter times, on multigram scales, and even under air. Observations and mechanistic studies suggest an intimate 'assembly' of auxiliary and SelectFluor prior/after photoexcitation. The auxiliary allows other EnT photochemistry under air. Examples show how auxiliary placement proximally directs regioselectivity, where previous methods are substrate-directed.

Time-resolved X-ray and XUV based spectroscopic methods for nonadiabatic processes in photochemistry

The photochemistry of numerous molecular systems is influenced by conical intersections (CIs). These omnipresent nonadiabatic phenomena provide ultra-fast radiationless relaxation channels by creating degeneracies between electronic states and decide over the final photoproducts. In their presence, the Born-Oppenheimer approximation breaks down, and the timescales of the electron and nuclear dynamics become comparable. Due to the ultra-fast dynamics and the complex interplay between nuclear and electronic degrees of freedom, the direct experimental observation of nonadiabatic processes close to CIs remains challenging. In this article, we give a theoretical perspective on novel spectroscopic techniques capable of observing clear signatures of CIs. We discuss methods that are based on ultra-short laser pulses in the extreme ultraviolet and X-ray regime, as their spectral and temporal resolution allow for resolving the ultra-fast dynamics near CIs.

Electrochemical deoxygenative reduction of ketones

Electrochemical reduction via paired electrolysis has been used to achieve deoxygenative reduction of ketones. As a result of the complexing of ketones with the triphenylphosphine radical cation generated by anodic oxidation, the reduction of carbonyl groups occurs readily. Through spontaneous β-scission of phosphoranyl radicals, C-O bonds are cleaved to form benzylic radical intermediates. These radical species are either able to abstract hydrogen from MeCN or undergo reduction at the cathode to give carbanions, upon workup forming reductive hydrogenation of ketones.

Mechanism of a Luminescent Dicopper System That Facilitates Electrophotochemical Coupling of Benzyl Chlorides via a Strongly Reducing Excited State

Photochemical radical generation has become a modern staple in chemical synthesis and methodology. Herein, we detail the photochemistry of a highly reducing, highly luminescent dicopper system [Cu2] (Eox* ≈ -2.7 V vs SCE; τ0 ≈ 10 μs) within the context of a model reaction: single-electron reduction of benzyl chlorides. The dicopper system is mechanistically well defined. As we show, it is the [Cu2]* excited state that serves as the outer-sphere photoreductant of benzyl chloride substrates; the ground-state oxidized byproduct, [Cu2]+, is electrochemically recycled, demonstrating a catalytic electrophotochemical C-C coupling process.

Radical hydrodifluoromethylation of unsaturated C-C bonds via an electroreductively triggered two-pronged approach

Due to its superior ability in controlling pharmaceutical activity, the installation of difluoromethyl (CF₂H) functionality into organic molecules has been an area of intensive research. In this context, difluoromethylation of C-C π bonds mediated by a CF₂H radical have been pursued as a central strategy to grant access to difluoromethylated hydrocarbons. However, early precedents necessitate the generation of oxidative chemical species that can limit the generality and utility of the reaction. We report here the successful implementation of radical hydrodifluoromethylation of unsaturated C-C bonds via an electroreductively triggered two-pronged approach. Preliminary mechanistic investigations suggest that the key distinction of the present strategy originates from the reconciliation of multiple redox processes under highly reducing electrochemical conditions. The reaction conditions can be chosen based on the electronic properties of the alkenes of interest, highlighting the hydrodifluoromethylation of both unactivated and activated alkenes. Notably, the reaction delivers geminal (bis)difluoromethylated products from alkynes in a single step by consecutive hydrodifluoromethylation, granting access to an underutilized 1,1,3,3-tetrafluoropropan-2-yl functional group. The late-stage hydrodifluoromethylation of densely functionalized pharmaceutical agents is also presented.

α-Amino Radical Halogen Atom Transfer Agents for Metallaphotoredox-Catalyzed Cross-Electrophile Couplings of Distinct Organic Halides

α-Amino radicals from simple tertiary amines were employed as halogen atom transfer (XAT) agents in metallaphotoredox catalysis for cross-electrophile couplings of organic bromides with organic iodides. This XAT strategy proved to be efficient for the generation of carbon radicals from a range of partners (alkyl, aryl, alkenyl, and alkynyl iodides). The reactivities of these radical intermediates were captured by nickel catalysis with organobromides including aryl, heteroaryl, alkenyl, and alkyl bromides, enabling six diverse C-C bond formations. Classic named reactions including Negishi, Suzuki, Heck, and Sonogashira reactions were readily achieved in a net-reductive fashion under mild conditions. More importantly, the cross coupling was viable with either organic bromide or iodide as limiting reactant based on the availability of substrates, which is beneficial to the late-stage functionalization of complex molecules. The scalability of this method in batch and flow was investigated, further demonstrating its applicability.

Electrophotochemical Ce-Catalyzed Ring-Opening Functionalization of Cycloalkanols under Redox-Neutral Conditions: Scope and Mechanism

Selective cleavage and functionalization of C-C bonds in alcohols is gaining increasing interest in organic synthesis and biomass conversion. In particular, the development of redox-neutral catalytic methods with cheap catalysts and clean energy is of utmost interest. In this work, we report a versatile redox-neutral method for the ring-opening functionalization of cycloalkanols by electrophotochemical (EPC) cerium (Ce) catalysis. The EPC-Ce-enabled catalysis allows for cycloalkanols with different ring sizes to be cleaved while tolerating a broad range of functional groups. Notably, in the presence of chloride as a counteranion and electrolyte, this protocol selectively leads to the formation of C-CN, C-C, C-S, or C-oxime bonds instead of a C-halide bond after β-scission. A preliminary mechanistic investigation indicates that the redox-active Ce catalyst can be tuned by electro-oxidation and photo-reduction, thus avoiding the use of an external oxidant. Spectroscopic characterizations (cyclic voltammetry, UV-vis, electron paramagnetic resonance, and X-ray absorption fine structure) suggest a Ce(III)/Ce(IV) catalytic pathway for this transformation, in which a Ce(IV)-alkoxide is involved.

Electrophotocatalysis: Combining Light and Electricity to Catalyze Reactions

Visible-light photocatalysis and electrocatalysis are two powerful strategies for the promotion of chemical reactions that have received tremendous attention in recent years. In contrast, processes that combine these two modalities, an area termed electrophotocatalysis, have until recently remained quite rare. However, over the past several years a number of reports in this area have shown the potential of combining the power of light and electrical energy to realize new catalytic transformations. Electrophotocatalysis offers the ability to perform photoredox reactions without the need for large quantities of stoichiometric or superstoichiometric chemical oxidants or reductants by making use of an electrochemical potential as the electron source or sink. In addition, electrophotocatalysis is readily amenable to the generation of open-shell photocatalysts, which tend to have exceptionally strong redox potentials. In this way, potent yet selective redox reactions have been realized under relatively mild conditions. This Perspective highlights recent advances in the area of electrophotocatalysis and provides some possible avenues for future work in this growing area.

Red Light-Based Dual Photoredox Strategy Resembling the Z-Scheme of Natural Photosynthesis

Photoredox catalysis typically relies on the use of single chromophores, whereas strategies, in which two different light absorbers are combined, are rare. In photosystems I and II of green plants, the two separate chromophores P₆₈₀ and P₇₀₀ both absorb light independently of one another, and then their excitation energy is combined in the so-called Z-scheme, to drive an overall reaction that is thermodynamically very demanding. Here, we adapt this concept to perform photoredox reactions on organic substrates with the combined energy input of two red photons instead of blue or UV light. Specifically, a Cu^I bis(α-diimine) complex in combination with in situ formed 9,10-dicyanoanthracenyl radical anion in the presence of excess diisopropylethylamine catalyzes ca. 50 dehalogenation and detosylation reactions. This dual photoredox approach seems useful because red light is less damaging and has a greater penetration depth than blue or UV radiation. UV-vis transient absorption spectroscopy reveals that the subtle change in solvent from acetonitrile to acetone induces a changeover in the reaction mechanism, involving either a dominant photoinduced electron transfer or a dominant triplet-triplet energy transfer pathway. Our study illustrates the mechanistic complexity in systems operating under multiphotonic excitation conditions, and it provides insights into how the competition between desirable and unwanted reaction steps can become more controllable.

Dehydroxylative Alkylation of α-Hydroxy Carboxylic Acid Derivatives via a Spin-Center Shift

A strategically distinct dehydroxylative alkylation reaction of α-hydroxy carboxylic acid derivatives with alkenes is developed. The reaction starts with the attack of a 4-dimethylaminopyridine (DMAP)-boryl radical to the carbonyl oxygen atom, followed by a spin-center shift (SCS) to trigger the C-O bond scission. The resulting α-carbonyl radicals couple with a wide range of alkenes to furnish various alkylated products. This strategy allows for the efficient conversion of a wide array of α-hydroxy amides and esters derived from several biomass molecules and natural products to value-added compounds. Experimental and computational studies verified the reaction mechanism.

Photoinduced Silylation of N-Heteroarenes and Unsaturated Benzamides with Naphthalimide-Based Organic Photocatalysts

Described herein is the development of a general strategy for the silylation of N-heteroaromatics and unsaturated benzamides via the rational designing of an efficient organic photocatalyst. The process features operational simplicity, mild reaction conditions, and the use of readily prepared naphthalimide (NI)-based organic photocatalysts. Notably, both inert trialkylhydrosilanes and arylhydrosilanes are well tolerated with this protocol.

Electrochemical Deoxygenative Barbier-Type Reaction

An effective deoxygenative C(sp³)-C(sp³) bond formation reaction is achieved through electrochemical reduction of alcoholic phosphates or sulfonates with aldehydes or ketones. Alcohol derivatives of phosphates undergo single-electron reduction under electrochemical conditions followed by a spontaneous cleavage of the C-O bond with the exothermic loss of phosphate resulting in an alkyl radical species. Subsequently, radical intermediates are further reduced to carbanions at the cathode, which are in situ trapped by carbonyl compounds, thus accomplishing a deoxygenative Barbier-type reaction.

Rhodaelectro-Catalyzed peri-Selective Direct Alkenylations with Weak O-Coordination Enabled by the Hydrogen Evolution Reaction (HER)

Direct C−H functionalizations by electrocatalysis is dominated by strongly coordinating N(sp²)‐directing groups. In sharp contrast, direct electrocatalytic transformations of weakly‐coordinating phenols remain underdeveloped. Herein, electrooxidative peri C−H alkenylations of challenging 1‐naphthols were achieved by versatile rhodium(III) catalysis via user‐friendly constant current electrolysis. The rhodaelectrocatalysis employed readily‐available alkenes and a protic reaction medium and features ample scope, good functional group tolerance and high site‐ and stereoselectivity. The strategy was successfully applied to high‐value, nitrogen‐containing heterocycles, thereby providing direct access to uncommon heterocyclic motifs based on the dihydropyranoquinoline skeleton.

Merging Charge Transfer into Metal-Organic Frameworks to Achieve High Reduction Potentials via Multiphoton Excitation

Utilization of multiphotons to achieve high reduction potentials is a highly demanding but still challenging task for reductive cleavage of inert bonds. Herein, we report a new charge transfer approach that simultaneously excites the electron-rich dye and the radical anionic of the electron-deficient one for photocatalytic activation of aryl chlorides with high reduction potentials (E_red ≈ -1.9 to -2.9 V). Interactions between the tetraphenylbenzene-1,4,-diamine dyes in the large pores of metal-organic frameworks and the adsorbed 9,10-dicyanoanthracene partly endows charge transfer in the ground state. The first photoexcitation led to the formation charge separation pairs containing both radical cation and anion for second photon excitation. The possibility of modifying each absorption band of the two dyes independently innovated the resultant aryl radicals applied in various useful transformations, expanding multiphoton manifolds on both the dye scopes and reaction versions. A comparison of the catalytic performance between different structural patterns of metal-organic frameworks with the same ligand demonstrated that the incorporating of the organic dyes within the pores of the frameworks was essential to form charge-transfer species and accelerate the interesting chemical conversion.

Electrophotocatalytic C-H Functionalization of N-Heteroarenes with Unactivated Alkanes under External Oxidant-Free Conditions

The Minisci alkylation of N-heteroarenes with unactivated alkanes under external oxidant-free conditions provides an economically attractive route to access alkylated N-heteroarenes but remains underdeveloped. Herein, a new electrophotocatalytic strategy to access alkyl radicals from strong C(sp³ )-H bonds was reported for the following Minisci alkylation reactions in the absence of chemical oxidants. This strategy realized the first example of cerium-catalyzed Minisci alkylation reaction directly from abundant unactivated alkanes with excellent atom economy. It is anticipated that the general design principle would enrich catalytic strategies to explore the functionalizations of strong C(sp³ )-H bonds under external oxidant-free conditions with H₂ evolution.

An organophotocatalytic late-stage N–CH3 oxidation of trialkylamines to N-formamides with O2 in continuous flow

We report an organophotocatalytic, N–CH₃-selective oxidation of trialkylamines in continuous flow. Based on the 9,10-dicyanoanthracene (DCA) core, a new catalyst (DCAS) was designed with solubilizing groups for flow processing. This allowed O₂ to be harnessed as a sustainable oxidant for late-stage photocatalytic N–CH₃ oxidations of complex natural products and active pharmaceutical ingredients bearing functional groups not tolerated by previous methods. The organophotocatalytic gas–liquid flow process affords cleaner reactions than in batch mode, in short residence times of 13.5 min and productivities of up to 0.65 g per day. Spectroscopic and computational mechanistic studies showed that catalyst derivatization not only enhanced solubility of the new catalyst compared to poorly-soluble DCA, but profoundly diverted the photocatalytic mechanism from singlet electron transfer (SET) reductive quenching with amines toward energy transfer (E_nT) with O₂.

An N–CH₃-selective trialkylamine oxidation to N-formamides is reported in continuous flow using gaseous O₂. A novel, enhanced-solubility dicyanoanthracene organophotocatalyst switched the photochemical mechanism from electron to energy transfer.