Enhanced Photoelectrochemical Performance of WO3 -Based Composite Photoanode Coupled with Carbon Quantum Dots and NiFe Layered Double Hydroxide

Laser-Printed Photoanode: Femtosecond Laser-Induced Crystalline Phase Transformation of WO3 Nanorods for Space-Efficient and Flexible Thin-Film Solar Water-Splitting Cells

Despite its potential for clean hydrogen harvesting, photoelectrochemical (PEC) water-splitting cells face challenges in commercialization, particularly related its harvesting performance and productivity at an industrial scale. Herein, a facile fabrication method of flexible thin-film photoanode for PEC water-splitting to overcome these limitations, based on laser processing technologies, is proposed. Laser-induced graphene, a carbon structure produced through direct laser writing carbonization (DLWC), plays a dual role: a flexible and stable current collector and a substrate for the hydrothermal synthesis of tungsten trioxide (WO3) nanorods (NRs). To facilitate water-splitting, a femtosecond-pulsed laser (fs laser) is focused on the WO3 NRs, converting their crystalline phase from pristine orthorhombic to monoclinic structure without thermal damage. With NiFe layered double hydroxide (LDH) catalyst, the flexible thin-film photoanode exhibits good PEC performance (1.46 mA cm-2 at 1.23 VRHE) and retains ≈90% of its performance after 3000 bending cycles. With its excellent mechanical properties, the flexible photoanode can be operated in various shapes with different curvatures, enabling space-efficient PEC water-splitting by loading larger photoanode within a given space. This study is expected to contribute to the advancement of large-scale solar water-splitting cells, introducing a new approach to enhance H2/O2 production and expand its application range.

CQDs improved the photoelectrocatalytic performance of plasma assembled WO3/TiO2-NRs for bisphenol A degradation

Carbon quantum dots (CQDs) have been supported on WO₃/TiO₂-NRs using a hydrothermal method and a novel CQDs/WO₃/TiO₂-NRs composite formed via dielectric barrier discharge. The composite electrodes were characterized using morphology, structural, optical and electrochemical analysis. The CQDs were successfully prepared on the composite electrode with the highest photocurrent density reaching 2.51 mA·cm^-2 under UV-visible light irradiation (100 mW·cm^-2) and an applied voltage of 0.6 V vs. Ag/AgCl. The CQDs/WO₃/TiO₂-NRs electrode exhibited a good degradation effect toward bisphenol A (BPA) (75.66 %) combined with the production of hydrogen (0.89 mmol) in Na₂SO₄ system after 2 h of the photoelectrocatalytic (PEC) reaction and the BPA degradation rate reached 100 % after 7 min of reaction in both simulated and real seawater. The CQDs/WO₃/TiO₂-NRs exhibited excellent stability and efficient PEC performance in which the CQDs acted as electron reservoirs to capture and promote charge separation. Our analysis of intermediates of BPA degradation indicated the possible degradation pathways that mainly formed BPA polymers in the Na₂SO₄ system or chlorinated compounds in the high chloride salt system.

Preparation of Fluorescent Carbon Dots Composites and Their Potential Applications in Biomedicine and Drug Delivery-A Review

Carbon dots (CDs), a new member of carbon nanostructures, rely on surface modification and functionalization for their good fluorescence phosphorescence and excellent physical and chemical properties, including small size (<10 nm), high chemical stability, biocompatibility, non-toxicity, low cost, and easy synthesis. In the field of medical research on cancer (IARC), CDs, a new material with unique optical properties as a photosensitizer, are being applied to heating local apoptosis induction of cancer cells. In addition, imaging tools can also be combined with a drug to form the nanometer complex compound, the imaging guidance for multi-function dosage, so as to improve the efficiency of drug delivery, which also plays a big role in genetic diagnosis. This paper mainly includes three parts: The first part briefly introduces the synthesis and preparation of carbon dots, and summarizes the advantages and disadvantages of different preparation methods; The second part introduces the preparation methods of carbon dot composites. Finally, the application status of carbon dot composites in biomedicine, cancer theranostics, drug delivery, electrochemistry, and photocatalysis is summarized.

Type-II Heterojunction CdIn2S4/BiVO4 Coupling with CQDs to Improve PEC Water Splitting Performance Synergistically

Bismuth vanadate (BiVO₄) has been considered as a promising photoelectrocatalytic (PEC) semiconductor, but suffers from severe hole recombination, attributed to the short hole-diffusion length and the low carrier mobility. Herein, a type-II heterojunction CdIn₂S₄/BiVO₄ is designed to improve the photocurrent density from 1.22 (pristine BiVO₄) to 2.68 mA cm^-2 at 1.23 V vs the reversible hydrogen electrode (RHE), accelerating the bulk separation of photogenerated carriers by the built-in field from the matched energy band. With the introduction of CQDs, CQDs/CdIn₂S₄/BiVO₄ increases the photocurrent density to 4.84 mA cm^-2, enhancing the light absorption and cathodically shifting its onset potential, due to the synergetic effect of the heterojunction and CQDs. Compared with BiVO₄, CQDs/CdIn₂S₄/BiVO₄ promotes the bulk separation efficiency to 94.6% and the surface injection efficiency to 72.2%. Additionally, spin-coating of FeOOH on CQDs/CdIn₂S₄/BiVO₄ could further improve the PEC performance and keep a long stability for water splitting. The density function theory (DFT) calculations illustrated that the type-II heterojunction CdIn₂S₄/BiVO₄ could decrease the oxygen evolution reaction (OER) overpotential and accelerate bulk charge separation for the built-in field of the aligned band structure.

Layered Double Hydroxides for Photo(electro)catalytic Applications: A Mini Review

Chemical energy conversion strategies by photocatalysis and electrocatalysis are promising approaches to alleviating our energy shortages and environmental issues. Due to the 2D layer structure, adjustable composition, unique thermal decomposition and memory properties, abundant surface hydroxyl, and low cost, layered double hydroxides (LDHs) have attracted extensive attention in electrocatalysis, photocatalysis, and photoelectrocatalysis. This review summarizes the main structural characteristics of LDHs, including tunable composition, thermal decomposition and memory properties, delaminated layer, and surface hydroxyl. Next, the influences of the structural characteristics on the photo(electro)catalytic process are briefly introduced to understand the structure-performance correlations of LDHs materials. Recent progress and advances of LDHs in photocatalysis and photoelectrocatalysis applications are summarized. Finally, the challenges and future development of LDHs are prospected from the aspect of structural design and exploring structure-activity relationships in the photo(electro)catalysis applications.

Application of carbon dots and their composite materials for the detection and removal of radioactive ions: A review

Radioactive ions with high-heat release or long half-life could cause long-term influence on environment and they might enter the food chain to damage human body for their toxicity and radioactivity. It is of great importance to develop methods and materials to detect and remove radioactive ions. Carbon dots and their composite materials has been applied widely in many fields due to their plentiful raw materials, facile synthesis and functional process, unique optical property and abundant functional groups. This comprehensive review focuses on the preparation of CDs and composite materials for the detection and adsorption of radioactive ions. Firstly, the recent-developed synthetic methods for CDs were summarized briefly, including hydrothermal/solvothermal, microwave, electrochemistry, microplasma, chemical oxidation methods, focusing on the influence of CDs properties. Secondly, the synthetic methods for CDs composite materials were classified to four categories and summarized generally. Thirdly, the application of CDs for radioactive ions detection and adsorption were explored and concluded including uranium, iodine, europium, strontium, samarium et al. Finally, the detection and adsorption mechanism for radioactive ions were searched and the perspective and outlook of CDs for detection and adsorption radioactive ions have been proposed based on our understanding.

Challenges and prospects about the graphene role in the design of photoelectrodes for sunlight-driven water splitting

Graphene and its derivatives have emerged as potential materials for several technological applications including sunlight-driven water splitting reactions. This review critically addresses the latest achievements concerning the use of graphene as a player in the design of hybrid-photoelectrodes for photoelectrochemical cells. Insights about the charge carrier dynamics of graphene-based photocatalysts which include metal oxides and non-metal oxide semiconductors are also discussed. The concepts underpinning the continued progress in the field of graphene/photoelectrodes, including different graphene structures, architecture as well as the possible mechanisms for hydrogen and oxygen reactions are also presented. Despite several reports having demonstrated the potential of graphene-based photocatalysts, the achieved performance remains far from the targeted benchmark efficiency for commercial application. This review also highlights the challenges and opportunities related to graphene application in photoelectrochemical cells for future directions in the field.

Engineering Nanostructure-Interface of Photoanode Materials Toward Photoelectrochemical Water Oxidation

Photoelectrochemical (PEC) water oxidation based on semiconductor materials plays an important role in the production of clean fuel and value-added chemicals. Nanostructure-interface engineering has proven to be an effective way to construct highly efficient PEC water oxidation photoanodes with good light capture, carrier transport, and water oxidation kinetics. However, from theoretical and application perspectives, the relationship between the nanostructure and interface of photoanode materials and their PEC performance remains unclear. In this review, the PEC water oxidation reaction mechanism and evaluation criteria are briefly presented. The theoretical basis and research status of the nanostructure-interface engineering on constructing high-performance PEC water oxidation photoanodes are summarized and discussed. Finally, the current challenges and the future opportunities of nanostructure-interface engineering for the PEC reactions are pointed out.

Enhanced Photoelectrochemical Water Splitting on Nickel-Doped Cobalt Phosphate by Modulating both Charge Transfer and Oxygen Evolution Efficiencies

Detrimental charge recombination at photoanode/electrolyte junctions severely impedes photoelectrochemical (PEC) performance. The deposition of cobalt phosphate (CoPi) onto photoanodes is an efficient approach to achieve high PEC efficiency. However, achieving performances at the required remains a huge challenge, owing to the passivation effect of CoPi. In this study, function-tunable strategy, whereby the passivation role is switched with the activation role, is exploited to modulate PEC performance through simultaneous activation of interface charge transfer and surface catalysis. By depositing nickel-doped CoPi onto a BiVO₄ (BV) substrate, the integrated system (BV/Ni₁ Co₇ Pi) exhibits a remarkable photocurrent density (4.15 mA cm^-2 ), which is a 4.6-fold increase relative to BV (0.90 mA cm^-2 ). Moreover, the satisfactory performance can be also achieved on α-Fe₂ O₃ photoanode. These findings provide guidance for improving the efficiency of CoPi on photoanodes for PEC water oxidation.