Bisulfone-Functionalized Organic Polymer Photocatalysts for High-Performance Hydrogen Evolution

Mixed-Linker Strategy for the Construction of Sulfone-Containing D-A-A Covalent Organic Frameworks for Efficient Photocatalytic Hydrogen Peroxide Production

The solar-driven photocatalytic production of hydrogen peroxide (H2O2) from water and oxygen using semiconductor catalysts offers a promising approach for converting solar energy into storable chemical energy. However, the efficiency of photocatalytic H2O2 production is often restricted by the low photo-generated charge separation, slow surface reactions and inadequate stability. Here, we developed a mixed-linker strategy to build a donor-acceptor-acceptor (D-A-A) type covalent organic framework (COF) photocatalyst, FS-OHOMe-COF. The FS-OHOMe-COF structure features extended π-π conjugation that improves charge mobility, while the introduction of sulfone units not only as active sites facilitates surface reactions with water but also bolsters stability through increased interlayer forces. The resulting FS-OHOMe-COF has a low exciton binding energy, long excited-state lifetime and high photo-stability that leads to high performance for photocatalytic H2O2 production (up to 1.0 mM h-1) with an H2O2 output of 19 mM after 72 hours of irradiation. Furthermore, the catalyst demonstrates high stability, which sustained activity over 192 hours of photocatalytic experiment.

Enhanced photocatalytic hydrogen evolution activity of co-catalyst free S-scheme polymer heterojunctions via ultrasonic assisted reorganization in solvent

In this work, two donor-acceptor linear conjugated polymers were designed and synthesized based on thianthrene-5,5,10,10-tetraoxide (TTO) as the acceptor unit, benzo[1,2-b:4,5-b']dithiophene derivative (Py1) and thiophene (Py2) as the donor units, respectively. The Py1/Py2 composite was prepared by physical ball milling of the two polymers in a mixture, which was further treated with a N-methyl-2-pyrrolidone (NMP)-assisted sonication treatment, and the obtained catalyst was named N-Py1/Py2. Compared with the single polymer or Py1/Py2, the FTIR characteristic peaks of O=S=O have a red shift for N-Py1/Py2, accompanied by a profound change in morphology. Furthermore, N-Py1/Py2 has a broader light response and more efficient separation and transport of charge carriers, and as a result it exhibits a higher photocatalytic hydrogen evolution rate (26.5 mmol g^-1 h^-1) without the involvement of any co-catalyst than Py1/Py2 catalyst (3.56 mmol g^-1 h^-1). The underlying mechanism for the enhanced photocatalytic activity by the sonication treatment in NMP is discussed based both on experimental and theoretical calculation data.

Structural Engineering of Covalent Organic Frameworks Comprising Two Electron Acceptors Improves Photocatalytic Performance

Covalent organic frameworks (COFs) have recently attracted much attention as potential photocatalysts for hydrogen production. The effective separation of photogenerated charges is a key objective to improve the photocatalytic activity of COFs. Here, four COFs were synthesized through the Schiff-base reaction to investigate whether the presence (simultaneous or not) of triazine and ketone as acceptors in COFs improved electron-hole separation efficiency. Evidence indicated that charge separation was more efficient when triazine and ketone were simultaneously present in the COF. The COF comprising two acceptors displayed the highest photocatalytic hydrogen production rate (31.43 μmol h^-1 ; 41.2 and 3.4 times as large as those of the COFs containing only triazine or ketone, respectively). Moreover, the effect of the distance between the two acceptors on the electron-hole separation was investigated by changing the length of a bridging biphenyl ring. It turned out that the transport distance of a single phenyl group was more favorable for the catalytic reaction. This work affords insight and support for the design of efficient COF photocatalysts.

Effect of the cross-linker length of thiophene units on photocatalytic hydrogen production of triazine-based conjugated microporous polymers

Conjugated microporous polymers (CMPs) have been investigated in the field of photocatalytic hydrogen production because of their extended π-conjugation, tunable chemical structure and excellent thermal stability. Herein, we construct three CMPs based on thiophenes and triazine, and prove the effect of cross-linker length on photocatalytic activity of CMPs. BTPT-CMP1 exhibits blue-shifted optical absorption compared to BTPT-CMP2 and BTPT-CMP3 with long cross-linkers, however, possesses higher photocurrent because of the large specific surface area and small interface charge transfer resistance of BTPT-CMP1. It was found that BTPT-CMP1 (5561.87 μmol g⁻¹ h⁻¹) with short cross-linkers exhibits better photocatalytic performance compared to BTPT-CMP2 (1840.86 μmol g⁻¹ h⁻¹) and BTPT-CMP3 (1600.48 μmol g⁻¹ h⁻¹). Also, BTPT-CMP1 possesses a higher hydrogen evolution rate than most reported 1,3,5-triazine based conjugated polymers. These results demonstrate that the cross-linker length has great influence on the photocatalytic properties of conjugated microporous polymers, which offers theoretical direction for designing high-performance CMPs.

Conjugated microporous polymers (CMPs) have been investigated in the field of photocatalytic hydrogen production because of their extended π-conjugation, tunable chemical structure and excellent thermal stability.

Organic Semiconductor/Carbon Dot Composites for Highly Efficient Hydrogen and Hydrogen Peroxide Coproduction from Water Photosplitting

Coproduction of hydrogen (H₂) and hydrogen peroxide (H₂O₂) from water splitting is one of the most promising ways to alleviate the energy crisis and environmental pollution. Here, we first show the synthesis and photocatalytic property of an organic semiconductor (DAnTMS compound) from 9,10-dibromoanthracene and trimethylsilylacetylene. Then, a metal-free photocatalyst of a DAnTMS/carbon dot (DAnTMS/CD) composite was designed and fabricated, which achieved the efficient photocatalytic production of H₂ and H₂O₂ without usage of any organic solvents and sacrificial agents. Under visible light, the DAnTMS/CD composite could produce H₂O₂ with a maximum rate of 396.7 μmol g^-1 h^-1 and H₂ with a maximum rate of 265.0 μmol g^-1 h^-1 in pure water. Transient photovoltage tests showed that CDs changed the interfacial electron transfer kinetics and served as the active site for highly efficient H₂ evolution. This work provided a deep insight into the function of CDs in regulating the catalytic property of organic photocatalysts.

Pathways towards Boosting Solar-Driven Hydrogen Evolution of Conjugated Polymers

Photocatalytic H₂ evolution under solar illumination has been considered to be a promising technology for green energy resources. Developing highly efficient photocatalysts for photocatalytic water splitting is long-term desired but still challenging. Conjugated polymers (CPs) have attracted ongoing attention and have been considered to be promising alternatives for solar-driven H₂ production due to the excellent merits of the large π-conjugated system, versatile structures, tunable photoelectric properties, and well-defined chemical composites. The excellent merits have offered numerous methods for boosting photocatalytic hydrogen evolution (PHE) of initial CP-based photocatalysts, whose apparent quantum yield is dramatically increased from <1 to >20% in recent five years. According to the photocatalytic mechanism, this review herein systematically summarizes three major strategies for boosting photocatalytic H₂ production of CPs: 1) enhancing visible light absorption, 2) suppressing recombination of electron-hole pairs, and 3) boosting surface catalytic reaction, mainly involving eleven methods, that is, copolymerization, modifying cross-linker, constructing a donor-acceptor structure, functionalization, fabricating organic heterojunction, loading cocatalyst, and surface modification. Finally, the perspectives towards the future development of PHE are proposed.

Photocatalytic H2 Evolution from Ammonia Borane: Improvement of Charge Separation and Directional Charge Transmission

Co/M^II Fe layered double hydroxide (LDH) LDH photocatalysts have been designed from the aspect of employing stable half-filled Fe³⁺ to trap photogenerated electrons, adjusting the M^II -O-Fe oxo-bridged structure to optimize the short-range directional charge transmission and intercalating oxometallate anions into the LDH to further improve light absorption along with electron-hole separation and non-noble metal Co NP loading and reduction to form a heterojunction. These LDH-based photocatalysts are employed for photocatalytic H₂ evolution from ammonia borane in aqueous solution under visible light at 298 K. The photocatalytic H₂ evolution activity is greatly improved through adjustment of the M^II -O-Fe oxo-bridged structure and molybdate intercalation into the LDH. Turnover frequencies of up to 113.2 min^-1 are achieved with Co/CoFe-Mo. Alongside the experimental results and materials characterization, capture experiments and in situ DRIFTS analysis are carried out to study the photocatalytic hydrogen production mechanism.

Borophene and Boron Fullerene Materials in Hydrogen Storage: Opportunities and Challenges

Two-dimensional materials have led to a leap forward in materials science research, especially in the fields of energy conversion and storage. Borophene and its spherical counterpart boron fullerene represent emerging materials that have attracted much attention in the whole area of advanced energy materials and technologies. Owing to their prominent features, such as electronic environment and geometry, borophene and boron fullerene have been used in versatile applications, such as supercapacitors, superconductors, anode materials for photochemical water splitting, and biosensors. Herein, one of the most promising applications/areas of hydrogen storage is discussed. Boron fullerenes have been considered and discussed for hydrogen-storage applications, and recently borophene was also included in the list of materials with promising hydrogen-storage properties. Studies focus mainly on doped borophene systems over pristine borophene due to enhanced features available upon decoration with metal atoms. This Review introduces very recent progress and novel paradigms with respect to both borophene derivatives and boron fullerene based systems reported for hydrogen storage, with a focus on the synthesis, physiochemical properties, hydrogen-storage mechanism, and practical applications.