Controlled Release from Drug Microparticles via Solventless Dry-Polymer Coating

Preparation of sustained-release tablets using a solventless-mixing tablet coating technique: Particle design of dry ammonioalkyl methacrylate copolymer latex with high coating performance using sodium lauryl sulfate

The aim of this study was to produce sustained-release tablets by V-shaped blending of polymer and tablets without using solvents or heating, and we investigated the design of polymer particles with high coating performance by modifying the structure of the particles using sodium lauryl sulfate. Dry-latex particles of ammonioalkyl methacrylate copolymer were prepared by adding the surfactant into aqueous latex, followed by freeze drying. The resulting dry latex was mixed with tablets (1:10) using a blender and the resulting coated tablets were characterized. Tablet coating by the dry latex was promoted as the weight ratio of surfactant to polymer increased. At a surfactant ratio of 5%, deposition of the dry latex was most effective and the resulting coated tablets (annealed at 60 °C/75%RH for 6 h) exhibited sustained-release characteristics over a period of 2 h. The addition of SLS prevented coagulation of colloidal polymer in the freeze drying, resulting in a loose-structured dry latex. This latex was easily pulverized by V-shaped blending with tablets and the resulting fine particles with high adhesiveness were deposited on the tablets. However, at a surfactant ratio of 10%, the coating of dry latex decreased due to reduced adhesiveness.

3D Raman mapping as an analytical tool for investigating the coatings of coated drug particles

The properties of dry-coated paracetamol particles (fast-dissolving model drug) with carnauba wax particles as the coating agent (dissolution retardant) were investigated. Raman mapping technique was used to non-destructively examine the thickness and homogeneity of coated particles. The results showed that the wax existed in two forms on the surface of the paracetamol particles, forming a porous coating layer: i) whole wax particles on the surface of paracetamol and glued together with other wax surface particles, and ii) deformed wax particles spread on the surface. Regardless of the final particle size fraction (between 100 and 800 μm), the coating thickness had high variability, with average thickness of 5.9 ± 4.2 μm. The ability of carnauba wax to decrease the dissolution rate of paracetamol was confirmed by dissolution of powder and tablet formulations. The dissolution was slower for larger coated particles. Tableting further reduced the dissolution rate, clearly indicating the impact of subsequent formulation processes on the final quality of the product.

Design and preparation of nanocomposite acrylate coating agents for binder-free dry coating of 100 µm-sized drug-containing particles and their coating performance

For binder-free dry particulate coating to prepare controlled-release micron-sized particles, we designed nanocomposite coating agents with the intention to form a core-shell structure composed of two types of acrylic polymers with different glass transition temperatures (Tg) and evaluated their coating performance. A series of nanocomposite acrylic latexes synthesized by emulsion polymerization was freeze-dried after salting-out to create the powder form. An ion-exchange resin loaded with diclofenac sodium (DS, a model drug) (IER-DS) with a median diameter of approximately 100 µm was used as the core particle. Dry coating of the IER-DS with nanocomposite coating agents was carried out using a laboratory-made coating apparatus assisted with mild-intensity vibration and zirconia bead impaction. The coated particles were cured by heating at a temperature 20 °C higher than the Tg for 12 h to complete the film-forming process. It was found that the highest coating efficiency (more than 70%) and a remarkably prolonged release period of the drug (the time required for 50% release reached approximately 12 h) could be achieved when nanocomposite coating agents with a soft polymeric core (Tg = 30 °C) and a hard polymeric shell (Tg = 80 °C) were applied. In contrast, nanocomposite coating agents with a combination of a hard polymeric core and a soft polymeric shell resulted in lower coating efficiency. These results demonstrate that nanocomposite polymeric coating agents composed of a soft core and hard shell are effective for the production of drug-loaded microparticles with a prolonged release function by a binder-free dry-coating process.

Monitoring microsphere coating processes using PAT tools in a bench scale fluid bed

Among the factors that influence adherence to medication within the pediatric population, taste/irritation has been identified as a critical barrier to patient compliance. With the goal of improving compliance, microspheres (matrix systems within which the drug is dispersed) can be coated with a reverse enteric polymer that will prevent the release of the drug in the oral cavity while maintaining an immediate release once the drug product reaches the stomach, thereby achieving a taste neutral profile. In this work, the in-line performance of three process analytical technology (PAT) tools is evaluated in order to monitor the microsphere coating process. These tools are Raman spectroscopy, near-infrared spectroscopy and focused beam reflectance measurements, together with process data and raw material attributes. The ability of these different sources of information to predict the coating's barrier performance is evaluated by using a combined-data-approach: multiblock partial least squares (MBPLS). Results show that Raman spectroscopy has a superior predictive performance and that it has the potential to monitor the coating process of the microspheres as well as to detect process discrepancies (such as spray rate changes), demonstrating its usefulness for the monitoring of fluid bed coating processes. It was also demonstrated that Raman can be used to clearly differentiate batches with significantly difference in-vitro dissolution performance. This monitoring is considered critical to ensure consistent coating performance for this thin film barrier membrane that is essential to patient compliance.

Building Process Understanding of Fluid Bed Taste Mask Coating of Microspheres

Taste is routinely cited as one of the major contributing factors that negatively influence pediatric patient compliance. A promising solution is coated microsphere systems, which provide doses of active pharmaceutical ingredients (API) subdivided into a plurality of small dosage units. In this work, the microspheres were coated with Kollicoat® Smartseal, a reverse enteric polymer, which acts to minimize or prevent the release of API in the neutral pH of the oral cavity, which results in a masking effect of the unpleasant taste of the API. A screening of seven key variables in a Wurster coating process was evaluated by D-optimal design and by analysis of variance. The percentage of API released at pH 6.2 was used as a surrogate method for the taste-masking performance evaluation of Kollicoat® Smartseal. The seven studied variables were: product bed temperature, inlet airflow, atomizing air pressure, spray rate (process parameters), coating level, plasticizer level, solids in coating suspension (material attributes), and curing. Results show that coating level, plasticizer level, product bed temperature, and spray rate are the critical process parameters and reinforce the importance of curing to reduce the overall variability within the batch by promoting complete film formation. The link between material attributes, process parameters, and quality attributes were demonstrated to allow a better understanding of the parameters that affect the API release profile at neutral pH (in vitro) while not injuring release at acidic pH (in vitro). It was demonstrated that not only thickness but also coating morphology have an impact on the dissolution in 50 mM potassium phosphate buffer, pH 6.2.

Binder-free dry particulate coating process using a mild vibration field: Effects of glass-transition temperature and powdering method of polymeric coating agents on coating performance

We employed a new dry coating process with mild-intensity vibration to prepare a 100-µm-sized microparticle capable of prolonged release of a drug. To accomplish this without using a binder, a series of laboratory-made acrylic latexes with different glass transition temperatures (Tg) ranging from 30 °C to 80 °C were employed as coating agents, and the effects of Tg and powdering method of the coating agents on coating performance were investigated. The laboratory-made acrylic latexes were powdered by spray-drying (SD) or freeze-drying (FD). Diclofenac sodium (DS)-loaded ion-exchange-resin with particle size ∼100 µm was used as a core particle. The process utilized vibrations with amplitude of 0.5 mm and frequency of 90 Hz to form an ordered mixture composed of the core particles with the loosely-layered coating agents. Subsequently, the coating agents were fixed mechanically on the core particle by impaction of zirconia beads. The coating agents powdered by FD showed higher coating efficiencies than those powdered by SD, irrespective of the differences in Tg values. Among the coating agents powdered by FD, the particles coated at Tg = 60 °C exhibited the most prolonged drug-release, although the coating efficiency was not the highest. In our proposed process utilizing mild vibration, we demonstrated that adjusting the Tg of the coating agents is crucial to the formation of binder-free multiple coating layers for prolonged drug release.

Atomic scale surface engineering of micro- to nano-sized pharmaceutical particles for drug delivery applications

Atomic layer deposition on pharmaceutical particles for drug delivery applications is demonstrated using assisted fluidized bed dry powder processing. Complete and conformal layering is achieved on particle sizes from the lower micron to upper nanometer range under near ambient conditions. As few as 2-14 atomic alumina layers alter particle properties: dissolution, dispersibility and heat transfer.