Highly Efficient Copper Sulfide-Based Near-Infrared Photothermal Agents: Exploring the Limits of Macroscopic Heat Conversion

Hollow cubic CuSe@CdS with tunable size for plasmon-induced Vis-NIR driven photocatalytic properties

The rational design of the dimension and geometry of a plasmonic semiconductor cocatalyst is vitally important for efficient utilization of near-infrared (NIR) light and superior photocatalytic hydrogen generation. Herein, hollow cubic CuSe@CdS composites with different sizes and strong localized surface plasmon resonance (LSPR) were prepared by selenizing size-tunable Cu2O templates and loading CdS nanoparticles. The size of hollow cubic CuSe can affect the surface area and the conduction band potential through the size effect, regulating the carrier behavior of the CuSe@CdS heterojunction. The CuSe@CdS composites show enhanced and wide absorption in the full spectrum due to the LSPR effect of CuSe. Meanwhile, the composites show excellent photocatalytic hydrogen capacity in the full spectrum in a 0.35 M Na2S/0.25 M Na2SO3 sacrificial reagent solution. The best hydrogen production rate of CSCE2 is 1.518 mmol g-1 h-1 (5.54 times higher than that of CdS) under Vis light (780 > λ > 420 nm) irradiation and 0.28 mmol g-1 h-1 under NIR light (λ > 780 nm) illumination. Interestingly, the photocatalytic activity for H2 under Vis-NIR light (λ > 420 nm) is about 3 times (up to 4.45 mmol g-1 h-1) higher than that without NIR light assistance, due to the photothermal effect. Various analyses and DFT calculations demonstrate that the p-n heterojunction formed in the composites consists of p-type CuSe and n-type CdS, which achieves efficient carrier transfer and separation under the synergistic effect of the size effect and the photothermal effect. In addition, the expansion of the photocatalytic performance to the NIR range is mainly due to the "hot-electron" injection mechanism induced by the LSPR effect of CuSe. The reasonable design coupled with the plasmonic materials offers a new path to achieving the highly efficient conversion of solar energy to hydrogen energy.

Effect of PVP Molecular Weights on the Synthesis of Ultrasmall Cus Nanoflakes: Synthesis, Properties, and Potential Application for Phototheranostics

Copper sulfide nanoparticles (CuS) hold tremendous potential for applications in photothermal therapy (PTT) and photoacoustic imaging (PAI). However, the conventional chemical coprecipitation method often leads to particle agglomeration issues. To overcome this challenge, we utilized polyvinylpyrrolidone (PVP) as a stabilizing agent, resulting in the synthesis of small PVP-CuS nanoparticles named PC10, PCK30, and PC40. Our study aimed to investigate how different molecular weights of PVP influence the nanoparticles' crystalline characteristics and essential properties, especially their photoacoustic and photothermal responses. While prior research on PVP-assisted CuS nanoparticles has been conducted, our study delves deeper into this area, providing insights into optical properties. Remarkably, all synthesized nanoparticles exhibited a crystalline structure, were smaller than 10 nm, and featured an absorbance peak at 1020 nm, indicating their robust photoacoustic and photothermal capabilities. Among these nanoparticles, PC10 emerged as the standout performer, displaying superior photoacoustic properties. Our photothermal experiments demonstrated significant temperature increases in all cases, with PC10 achieving an impressive efficiency of 51%. Moreover, cytotoxicity assays revealed the nanoparticles' compatibility with cells, coupled with an enhanced incidence of apoptosis compared to necrosis. These findings underscore the promising potential of PVP-stabilized CuS nanoparticles for advanced cancer theranostics.

Plasmonic silver and gold nanoparticles: shape- and structure-modulated plasmonic functionality for point-of-caring sensing, bio-imaging and medical therapy

Silver and gold nanoparticles have found extensive biomedical applications due to their strong localized surface plasmon resonance (LSPR) and intriguing plasmonic properties. This review article focuses on the correlation among particle geometry, plasmon properties and biomedical applications. It discusses how particle shape and size are tailored via controllable synthetic approaches, and how plasmonic properties are tuned by particle shape and size, which are embodied by nanospheres, nanorods, nanocubes, nanocages, nanostars and core-shell composites. This article summarizes the design strategies for the use of silver and gold nanoparticles in plasmon-enhanced fluorescence, surface-enhanced Raman scattering (SERS), electroluminescence, and photoelectrochemistry. It especially discusses how to use plasmonic nanoparticles to construct optical probes including colorimetric, SERS and plasmonic fluorescence probes (labels/reporters). It also demonstrates the employment of Ag and Au nanoparticles in polymer- and paper-based microfluidic devices for point-of-care testing (POCT). In addition, this article highlights how to utilize plasmonic nanoparticles for in vitro and in vivo bio-imaging based on SERS, fluorescence, photoacoustic and dark-field models. Finally, this article shows perspectives in plasmon-enhanced photothermal and photodynamic therapy.

A Terrylene-Anthraquinone Dyad as a Chromophore for Photothermal Therapy in the NIR-II Window

A terrylenedicarboximide-anthraquinone dyad, FTQ, with absorption in the second near-infrared region (NIR-II) is obtained as a high-performance chromophore for photothermal therapy (PTT). The synthetic route proceeds by C-N coupling of amino-substituted terrylenedicarboximide (TMI) and 1,4-dichloroanthraquinone followed by alkaline-promoted dehydrocyclization. FTQ with extended π-conjugation exhibits an optical absorption band peaking at 1140 nm and extending into the 1500 nm range. Moreover, as determined by dielectric spectroscopy in dilute solutions, FTQ achieves an ultrastrong dipole moment of 14.4 ± 0.4 Debye due to intense intramolecular charge transfer. After encapsulation in a biodegradable polyethylene glycol (DSPE-mPEG2000), FTQ nanoparticles (NPs) deliver a high photothermal conversion efficiency of 49% under 1064 nm laser irradiation combined with excellent biocompatibility, photostability, and photoacoustic imaging capability. In vitro and in vivo studies reveal the great potential of FTQ NPs in photoacoustic-imaging-guided photothermal therapy for orthotopic liver cancer treatment in the NIR-II window.

Photothermal Nanomaterials: A Powerful Light-to-Heat Converter

All forms of energy follow the law of conservation of energy, by which they can be neither created nor destroyed. Light-to-heat conversion as a traditional yet constantly evolving means of converting light into thermal energy has been of enduring appeal to researchers and the public. With the continuous development of advanced nanotechnologies, a variety of photothermal nanomaterials have been endowed with excellent light harvesting and photothermal conversion capabilities for exploring fascinating and prospective applications. Herein we review the latest progresses on photothermal nanomaterials, with a focus on their underlying mechanisms as powerful light-to-heat converters. We present an extensive catalogue of nanostructured photothermal materials, including metallic/semiconductor structures, carbon materials, organic polymers, and two-dimensional materials. The proper material selection and rational structural design for improving the photothermal performance are then discussed. We also provide a representative overview of the latest techniques for probing photothermally generated heat at the nanoscale. We finally review the recent significant developments of photothermal applications and give a brief outlook on the current challenges and future directions of photothermal nanomaterials.

Enhanced Peroxidase-like Activity of CuS Hollow Nanocages by Plasmon-Induced Hot Carriers and Photothermal Effect for the Dual-Mode Detection of Tannic Acid

High catalytic activity is one of the necessary parameters for nanozymes to substitute for natural enzymes. It remains a great challenge to improve the specific enzyme-like activity of nanozymes as much as possible using the characteristics of nanomaterials for avoiding complexity and introducing additional uncertainties. Here, by combining the peroxidase (POD)-like activity and plasmon properties of CuS hollow nanocages (CuS HNCs), we demonstrate the feasibility of modulating the catalytic activity of nanozymes by the localized surface plasmon resonance (LSPR) effect. Rough surfaces and hollow-cage structures endow CuS HNCs with abundant hot spots to produce strong LSPR in the near-infrared (NIR) region, which makes the CuS HNCs simultaneously generate plentiful high-energy hot carriers and thermal effect to mediate H₂O₂ cleavage to yield the reactive oxide species (ROS) as well as speed up the reaction, leading to a dramatically enhanced POD-like activity. Based on the light-enhanced catalytic activity and high photothermal efficiency of the reaction system, a dual-mode strategy for detecting tannic acid (TA) is developed and successfully applied to determine the content of TA in different kinds of teas. This work not only provides a novel path for tuning the specific enzyme-like activity of nanomaterials but also shows a perspective for dual-mode sensing based on a photoinduced plasmon-enhanced effect.

NIR-Absorbing Mesoporous Silica-Coated Copper Sulphide Nanostructures for Light-to-Thermal Energy Conversion

Plasmonic nanostructures, featuring near infrared (NIR)-absorption, are rising as efficient nanosystems for in vitro photothermal (PT) studies and in vivo PT treatment of cancer diseases. Among the different materials, new plasmonic nanostructures based on Cu_2−xS nanocrystals (NCs) are emerging as valuable alternatives to Au nanorods, nanostars and nanoshells, largely exploited as NIR absorbing nanoheaters. Even though Cu_2−xS plasmonic properties are not linked to geometry, the role played by their size, shape and surface chemistry is expected to be fundamental for an efficient PT process. Here, Cu_2−xS NCs coated with a hydrophilic mesoporous silica shell (MSS) are synthesized by solution-phase strategies, tuning the core geometry, MSS thickness and texture. Besides their loading capability, the silica shell has been widely reported to provide a more robust plasmonic core protection than organic molecular/polymeric coatings, and improved heat flow from the NC to the environment due to a reduced interfacial thermal resistance and direct electron–phonon coupling through the interface. Systematic structural and morphological analysis of the core-shell nanoparticles and an in-depth thermoplasmonic characterization by using a pump beam 808 nm laser, are carried out. The results suggest that large triangular nanoplates (NPLs) coated by a few tens of nanometers thick MSS, show good photostability under laser light irradiation and provide a temperature increase above 38 °C and a 20% PT efficiency upon short irradiation time (60 s) at 6 W/cm² power density.

Quantitative Comparison of the Light-to-Heat Conversion Efficiency in Nanomaterials Suitable for Photothermal Therapy

Functional colloidal nanoparticles capable of converting between various energy types are finding an increasing number of applications. One of the relevant examples concerns light-to-heat-converting colloidal nanoparticles that may be useful for localized photothermal therapy of cancers. Unfortunately, quantitative comparison and ranking of nanoheaters are not straightforward as materials of different compositions and structures have different photophysical and chemical properties and may interact differently with the biological environment. In terms of photophysical properties, the most relevant information to rank these nanoheaters is the light-to-heat conversion efficiency, which, along with information on the absorption capacity of the material, can be used to directly compare materials. In this work, we evaluate the light-to-heat conversion properties of 17 different nanoheaters belonging to different groups (plasmonic, semiconductor, lanthanide-doped nanocrystals, carbon nanocrystals, and metal oxides). We conclude that the light-to-heat conversion efficiency alone is not meaningful enough as many materials have similar conversion efficiencies─in the range of 80-99%─while they significantly differ in their extinction coefficient. We therefore constructed their qualitative ranking based on the external conversion efficiency, which takes into account the conventionally defined light-to-heat conversion efficiency and its absorption capacity. This ranking demonstrated the differences between the samples more meaningfully. Among the studied systems, the top-ranking materials were black porous silicon and CuS nanocrystals. These results allow us to select the most favorable materials for photo-based theranostics and set a new standard in the characterization of nanoheaters.

Poly-β-Cyclodextrin-coated neodymium-containing copper sulfide nanoparticles as an effective anticancer drug carrier

Aim: This study aims at tuning the properties of the nanoparticles by incorporating neodymium, exploring the sustained release of drug, and the anticancer activity on breast cancer cells.Methods: The crystal characteristics of NdCuS₂ nanoparticles are analyzed using X-ray diffraction. The morphology and size of the nanoparticles were characterized using Transmission Electron Microscope and particle size analyzer. The rate of release of the encapsulated camptothecin and anticancer effects on breast cancer cells are investigated.Results: The nanoparticles are rod-shaped, 132 ± 8 nm long and 27 ± 7 nm wide. The band gap of the nanoparticles is 4.85 eV. The drug encapsulation efficiency is 94.76% (w/w). The drug is released in a sustained manner, over a period of 180 hours. The cytotoxicity of the camptothecin-loaded NPs is examined on MDA-MB-231 cells and the IC50 is 4.39 µg mL^-1Conclusion: The NdCuS₂ nanoparticles are promising as theranostic agents considering their material characteristics and anticancer activity.

Manipulating Cation Exchange Reactions in Cu2-xS Nanoparticles via Crystal Structure Transformation

Copper-deficient Cu_2-xS nanoparticles (NPs) are extensively exploited as a superior cation exchange (CE) template to yield sophisticated nanostructures. Recently, it has been discovered that their CE reactions can be facilely manipulated by copper vacancy density, morphology, and NP size. However, the structural similarity of usually utilized Cu_2-xS somewhat limits the manipulation of the CE reactions through the factor of crystal structure because it can strongly influence the process of the reaction. Herein, we report a methodology of crystal structure transformation to manipulate the CE reactions. Particularly, roxbyite Cu_1.8S nanodisks (NDs) were converted into solid wurtzite CdS NDs and Janus-type Cu_1.94S/CdS NDs by a "full"/partial CE reaction with Cd²⁺. Afterward, the roxbyite Cu_1.8S were pseudomorphically transformed into covellite CuS NDs. Unlike Cu_1.8S, the CuS was scarcely exchanged because of the unique disulfide (S-S) bonds and converted into hollow wurtzite CdS under a more reactive condition. The S-S bonds were gradually split and CuS@CdS core@shell-type NDs were generated. Therefore, our findings in the present study provide not only a versatile technique to manipulate CE reactions in Cu_2-xS NPs but also a better comprehension of their reaction dynamics and pathways.

Liposome-Embedded Cu2-xAgxS Nanoparticle-Mediated Photothermal Immunoassay for Daily Monitoring of cTnI Protein Using a Portable Thermal Imager

Functional photothermal nanomaterials have gained widespread attention in the field of precise cancer therapy and early disease diagnosis due to their unique photothermal conversion properties. However, the relatively narrow temperature response range and the outputable accuracy of commercial thermometers limit the accurate detection of biomarkers. Herein, we designed a liposome-embedded Cu_2-xAg_xS amplification-based photothermal sensor for the accurate determination of cardiac troponin I (cTnI) in health monitoring and point-of-care testing (POCT). The combinable 3D-printing detecting device monitored and visualized target signal changes in the testing system under the excitation of near-infrared (NIR) light, which was recorded and evaluated for possible pathogenicity by a smartphone. Notably, we predicted the potentially efficient thermal conversion efficiency of Cu_2-xAg_xS from the structure and charge density distribution, calculated by the first-principles and density functional theory (DFT), which provided a theoretical basis for the construction of novel photothermal materials, and the experimental results proved the correctness of the theoretical projections. Under optimal conditions, the photothermal immunoassay showed a dynamic linear range of 0.02-10 ng mL^-1 with a detection limit of 11.2 pg mL^-1. This work instructively introduces promising theoretical research and provides new insights for the development of sensitive portable photothermal biosensors.

Nanoparticle-Mediated Photothermal Therapy Limitation in Clinical Applications Regarding Pain Management

The development of new effective cancer treatment methods has attracted much attention, mainly due to the limited efficacy and considerable side effects of currently used cancer treatment methods such as radiation therapy and chemotherapy. Photothermal therapy based on the use of plasmonically resonant metallic nanoparticles has emerged as a promising technique to eradicate cancer cells selectively. In this method, plasmonic nanoparticles are first preferentially uptaken by a tumor and then selectively heated by exposure to laser radiation with a specific plasmonic resonant wavelength, to destroy the tumor whilst minimizing damage to adjacent normal tissue. However, several parameters can limit the effectiveness of photothermal therapy, resulting in insufficient heating and potentially leading to cancer recurrence. One of these parameters is the patient’s pain sensation during the treatment, if this is performed without use of anesthetic. Pain can restrict the level of applicable laser radiation, cause an interruption to the treatment course and, as such, affect its efficacy, as well as leading to a negative patient experience and consequential general population hesitancy to this type of therapy. Since having a comfortable and painless procedure is one of the important treatment goals in the clinic, along with its high effectiveness, and due to the relatively low number of studies devoted to this specific topic, we have compiled this review. Moreover, non-invasive and painless methods for temperature measurement during photothermal therapy (PTT), such as Raman spectroscopy and nanothermometry, will be discussed in the following. Here, we firstly outline the physical phenomena underlying the photothermal therapy, and then discuss studies devoted to photothermal cancer treatment concerning pain management and pathways for improved efficiency of photothermal therapy whilst minimizing pain experienced by the patient.

Crystal structure dependent cation exchange reactions in Cu2-xS nanoparticles

Because of high mobility of Cu⁺ in crystal lattice, Cu_2-xS nanoparticles (NPs) utilized as cation exchange (CE) templates to produce complicated nanomaterials has been extensively investigated. Nevertheless, the structural similarity of commonly used Cu_2-xS somewhat limits the exploration of crystal structure dependent CE reactions, since it may dramatically affect the reaction dynamics and pathways. Herein, we select djurleite Cu_1.94S and covellite CuS nanodisks (NDs) as starting templates and show that the crystal structure has a strong effect on their CE reactions. In the case of djurleite Cu_1.94S NDs, the Cu⁺ was immediately substituted by Cd²⁺ and solid wurtzite CdS NDs were produced. At a lower reaction temperature, these NDs were partially substituted, giving rise to the formation of Janus-type Cu_1.94S/CdS NDs, and this process is kinetically and thermodynamically favorable. For covellite CuS NDs, they were transformed into hollow CdS NDs under a more aggressive reaction condition due to the unique disulfide covalent bonds. These disulfide bonds distributed along [0 0 1] direction were gradually ruptured/reduced and CuS@CdS core-shell NDs could be obtained. Our findings suggest that not only the CE reaction kinetics and thermodynamics, but also the intermediates and final products are intimately correlated to the crystal structure of the host material.

Bismuth Selenide Nanostructured Clusters as Optical Coherence Tomography Contrast Agents: Beyond Gold-Based Particles

Optical coherence tomography (OCT) is an imaging technique currently used in clinical practice to obtain optical biopsies of different biological tissues in a minimally invasive way. Among the contrast agents proposed to increase the efficacy of this imaging method, gold nanoshells (GNSs) are the best performing ones. However, their preparation is generally time-consuming, and they are intrinsically costly to produce. Herein, we propose a more affordable alternative to these contrast agents: Bi₂Se₃ nanostructured clusters with a desert rose-like morphology prepared via a microwave-assisted method. The structures are prepared in a matter of minutes, feature strong near-infrared extinction properties, and are biocompatible. They also boast a photon-to-heat conversion efficiency of close to 50%, making them good candidates as photothermal therapy agents. In vitro studies evidence the prowess of Bi₂Se₃ clusters as OCT contrast agents and prove that their performance is comparable to that of GNSs.

CuS@BSA-NB2 Nanoparticles for HER2-Targeted Photothermal Therapy

Breast cancer is characterized by the uncontrolled proliferation of breast epithelial cells under the action of a variety of carcinogens. Although HER2-inhibitors were currently applied for HER2-positive breast cancer patients, they didn't work for patients with resistance to HER2-targeted anti-cancer drugs. In this work, we prepared novel CuS@BSA-NB2 nanoparticles (NPs) for breast cancer photothermal therapy (PTT). The NPs had good biocompatibility due to the Bovine Serum Albumin (BSA) encapsulating and excellent targeting to HER2 because of nanobody 2 (NB2). Under 808 nm laser irradiation, CuS@BSA-NB2 NPs had high photothermal conversion efficiency and photothermal stability. Meanwhile, we constructed a stable cell line of MDA-MB-231/HER2 with a high expression of HER2 protein. Immunofluorescence and ICP-MS assays showed that CuS@BSA-NB2 NPs can be specifically enriched and be ingested in MDA-MB-231/HER2 cells. Furthermore, CuS@BSA-NB2 NPs had shown a more significant photothermal treatment effect than CuS@BSA under certain treatment conditions for MDA-MB-231/HER2. In addition, the cytotoxicity assay demonstrated that CuS@BSA-NB2 NPs had a low toxicity for MDA-MB-231/HER2 cells. The above results suggested that CuS@BSA-NB2 NPs were great photothermal therapeutic agents to reduce the malignant proliferation of breast epithelial cells and have potential for breast cancer therapy.

Chiral CuS nanoparticles and their photothermal properties

Chiral CuS NPs were prepared through a ligand-exchange process and CPL-controlled photothermal performance was realized.

Near infrared bioimaging and biosensing with semiconductor and rare-earth nanoparticles: recent developments in multifunctional nanomaterials

Research in novel materials has been extremely active over the past few decades, wherein a major area of interest has been nanoparticles with special optical properties. These structures can overcome some of the intrinsic limitations of contrast agents routinely used in medical practice, while offering additional functionalities. Materials that absorb or scatter near infrared light, to which biological tissues are partially transparent, have attracted significant attention and demonstrated their potential in preclinical research. In this review, we provide an at-a-glance overview of the most recent developments in near infrared nanoparticles that could have far-reaching applications in the life sciences. We focus on materials that offer additional functionalities besides diagnosis based on optical contrast: multiple imaging modalities (multimodal imaging), sensing of physical and chemical cues (multivariate diagnosis), or therapeutic activity (theranostics). Besides presenting relevant case studies for each class of optically active materials, we discuss their design and safety considerations, detailing the potential hurdles that may complicate their clinical translation. While multifunctional nanomaterials have shown promise in preclinical research, the field is still in its infancy; there is plenty of room to maximize its impact in preclinical studies as well as to deliver it to the clinics.

Standardization of Methodology of Light-to-Heat Conversion Efficiency Determination for Colloidal Nanoheaters

Localized photothermal therapy (PTT) has been demonstrated to be a promising method of combating cancer, that additionally synergistically enhances other treatment modalities such as photodynamic therapy or chemotherapy. PTT exploits nanoparticles (called nanoheaters), that upon proper biofunctionalization may target cancerous tissues, and under light stimulation may convert the energy of photons to heat, leading to local overheating and treatment of cancerous cells. Despite extensive work, there is, however, no agreement on how to accurately and quantitatively compare light-to-heat conversion efficiency (η_Q) and rank the nanoheating performances of various groups of nanomaterials. This disagreement is highly problematic because the obtained η_Q values, measured with various methods, differ significantly for similar nanomaterials. In this work, we experimentally review existing optical setups, methods, and physical models used to evaluate η_Q. In order to draw a binding conclusion, we cross-check and critically evaluate the same Au@SiO₂ sample in various experimental conditions. This critical study let us additionally compare and understand the influence of the other experimental factors, such as stirring, data recording and analysis, and assumptions on the effective mass of the system, in order to determine η_Q in a most straightforward and reproducible way. Our goal is therefore to contribute to the understanding, standardization, and reliable evaluation of η_Q measurements, aiming to accurately rank various nanoheater platforms.

Optothermal properties of plasmonic inorganic nanoparticles for photoacoustic applications

Plasmonic systems are becoming a favourable alternative to dye molecules in the generation of photoacoustic signals for spectroscopy and imaging. In particular, inorganic nanoparticles are appealing because of their versatility. In fact, as the shape, size and chemical composition of nanoparticles are directly correlated with their plasmonic properties, the excitation wavelength can be tuned to their plasmon resonance by adjusting such traits. This feature enables an extensive spectral range to be covered. In addition, surface chemical modifications can be performed to provide the nanoparticles with designed functionalities, e.g., selective affinity for specific macromolecules. The efficiency of the conversion of absorbed photon energy into heat, which is the physical basis of the photoacoustic signal, can be accurately determined by photoacoustic methods. This review contrasts studies that evaluate photoconversion in various kinds of nanomaterials by different methods, with the objective of facilitating the researchers' choice of suitable plasmonic nanoparticles for photoacoustic applications.

Mitochondria-Targeting Enhanced Phototherapy by Intrinsic Characteristics Engineered "One-for-All" Nanoparticles

Mitochondria-targeted synergistic therapy, including photothermal (PTT) and photodynamic therapy (PDT), has aroused wide attention due to the high sensitivity to reactive oxygen species (ROS) and heat shock of mitochondria. However, most of the developed nanosystems for the combinatorial functions require the integration of different components, such as photosensitizers and mitochondria-targeted molecules. Consequently, it indispensably requires sophisticated design and complex synthetic procedures. In this work, a well-designed Bi2S3-based nanoneedle, that localizes to mitochondria and produces extra ROS with inherent photothermal effect, was reported by doping of Fe (denoted as FeBS). The engineered intrinsic characteristics certify the capacity of such "one-for-all" nanosystems without additional molecules. The lipophilicity and surface positive charge are demonstrated as crucial factors for specifical mitochondria targeting. Significantly, Fe doping overcomes the disadvantage of the narrow band gap of Bi2S3 to prevent the fast recombination of electron-hole, hence resulting in the generation of ROS for PDT. The "one-for-all" nanoparticles integrate with mitochondria-targeting and synergistic effect of PDT and PTT, thus exhibit enhanced therapeutic effect and inhibit the growth of tumors observably. This strategy may open a new direction in designing the mitochondria-targeted materials and broadening the properties of inorganic semiconductor materials for satisfactory therapeutic outcomes.

Cascade targeting tumor mitochondria with CuS nanoparticles for enhanced photothermal therapy in the second near-infrared window

Photothermal therapy, assisted by local heat generation using photothermal nanoparticles (NPs), is an emerging strategy to treat tumors noninvasively. To improve treatment outcomes and to alleviate potential side effects on normal tissue cells, utilizing the optically transparent second near-infrared (NIR-II) window and actively targeting tumors are critical. Considering that mitochondria are heat sensitive and play an important role in the up-regulation of metabolic activity in tumor cells, herein we report a cascade targeting scheme that enables active photothermal ablation of tumor mitochondria. First, NIR-II absorbing CuS NPs were surface modified with the mitochondria targeting moiety (3-carboxypropyl) triphenylphosphonium bromide (TPP) and then shielded with CD44 targeting hyaluronic acid, which will only expose TPP upon reaching the tumor sites. This allowed over 90% CuS NP enrichment at tumor mitochondria, and as a result, significantly improved tumor cell photothermal ablation was observed at the cellular level. An in vivo study demonstrated enhanced tumor uptake and improved tumor growth suppression by using these cascade targeting CuS NPs as NIR-II photothermal agents.

Massive Intracellular Remodeling of CuS Nanomaterials Produces Nontoxic Bioengineered Structures with Preserved Photothermal Potential

Despite efforts in producing nanoparticles with tightly controlled designs and specific physicochemical properties, these can undergo massive nano-bio interactions and bioprocessing upon internalization into cells. These transformations can generate adverse biological outcomes and premature loss of functional efficacy. Hence, understanding the intracellular fate of nanoparticles is a necessary prerequisite for their introduction in medicine. Among nanomaterials devoted to theranostics is copper sulfide (CuS), which provides outstanding optical properties along with easy synthesis and low cost. Herein, we performed a long-term multiscale study on the bioprocessing of hollow CuS nanoparticles (CuS NPs) and rattle-like iron oxide nanoflowers@CuS core-shell hybrids (IONF@CuS NPs) when inside stem cells and cancer cells, cultured as spheroids. In the spheroids, both CuS NPs and IONF@CuS NPs are rapidly dismantled into smaller units (day 0 to 3), and hair-like nanostructures are generated (day 9 to 21). This bioprocessing triggers an adaptation of the cellular metabolism to the internalized metals without impacting cell viability, differentiation, or oxidative stress response. Throughout the remodeling, a loss of IONF-derived magnetism is observed, but, surprisingly, the CuS photothermal potential is preserved, as demonstrated by a full characterization of the photothermal conversion across the bioprocessing process. The maintained photothermal efficiency correlated well with synchrotron X-ray absorption spectroscopy measurements, evidencing a similar chemical phase for Cu but not for Fe over time. These findings evidence that the intracellular bioprocessing of CuS nanoparticles can reshape them into bioengineered nanostructures without reducing the photothermal function and therapeutic potential.

NIR-Driven Intracellular Photocatalytic O2 Evolution on Z-Scheme Ni3S2/Cu1.8S@HA for Hypoxic Tumor Therapy

Hypoxia in a tumor microenvironment (TME) has inhibited the photodynamic therapy (PDT) efficacy. Here, Ni₃S₂/Cu_1.8S nanoheterostructures were synthesized as a new photosensitizer, which also realizes the intracellular photocatalytic O₂ evolution to relieve hypoxia in TME and enhance PDT as well. With the narrow band gap (below 1.5 eV), the near infrared (NIR) (808 nm) can stimulate their separation of the electron-hole. The novel Z-scheme nanoheterostructures, testified by experimental data and density functional theory (DFT) calculation, possess a higher redox ability, endowing the photoexited holes with sufficient potential to oxide H₂O into O₂, directly. Meanwhile, the photostimulated electrons can capture the dissolved O₂ to form a toxic reactive oxygen species (ROS). Moreover, Ni₃S₂/Cu_1.8S nanocomposites also possess the catalase-/peroxidase-like activity to convert the endogenous H₂O₂ into ·OH and O₂, which not only cause chemodynamic therapy (CDT) but also alleviate hypoxia to assist the PDT as well. In addition, owing to the narrow band gap, they possess a high NIR harvest and great photothermal conversion efficiency (49.5%). It is noted that the nanocomposites also exhibit novel biodegradation and can be metabolized and eliminated via feces and urine within 2 weeks. The present single electrons in Ni/Cu ions induce the magnetic resonance imaging (MRI) ability for Ni₃S₂/Cu_1.8S. To make sure that the cancer cells were specifically targeted, hyaluronic acid (HA) was grafted outside and Ni₃S₂/Cu_1.8S@HA integrated photodynamic therapy (PDT), chemodynamic therapy (CDT), and photothermal therapy (PTT) to exhibit the great anticancer efficiency for hypoxic tumor elimination.

Photothermal effect and cytotoxicity of CuS nanoflowers deposited over folic acid conjugated nanographene oxide

Herein, we present the rational synthesis of a multimode photothermal agent, NGO-FA-CuS, for the advancement of photothermal therapy of cancer. The hierarchical architecture created in NGO-FA-CuS was attained by the covalent conjugation of folic acid (FA) to nanographene oxide (NGO) through amide bonding, followed by the hydrothermal deposition of CuS nanoflowers. In this approach, instead of mere mixing or deposition, FA was covalently bonded to NGO, which helped in retaining their intrinsic properties after binding and allowed to access them in the resulting hybrid nanostructure. In this specifically designed photothermal agent, NGO-FA-CuS, each component has an explicit task, i.e., NGO, FA and CuS act as the quencher, cancer cell-targeting moiety and photothermal transduction agent, respectively. Prior to the grafting of FA molecules and the deposition of CuS nanoflowers, sulfonic acid groups were introduced into NGO to provide stability under physiological conditions. Under irradiation using a 980 nm laser, NGO-FA-CuS was able to attain a temperature of 63.1 °C within 5 min, which is far beyond the survival temperature for cancer cells. Therefore, the resulting temperature recorded for NGO-FA-CuS was sufficient to induce hyperthermia in cancer cells to cause their death. When coming into contact with cancer cells, NGO-FA-CuS can cause a rapid increase in the temperature of their nucleus, destroy the genetic substances, and ultimately lead to exhaustive apoptosis under illumination using a near-infrared (NIR) laser. An excellent photothermal efficiency of 46.2% under illumination using a 980 nm laser and outstanding cytotoxicity against HeLa, SKOV3 and KB cells were attained with NGO-FA-CuS. Moreover, NGO-FA-CuS displays exceptional persistent photo-stability without photo-corrosiveness. The photothermal effect of NGO-FA-CuS was found to be dependent on its concentration and the power density of the laser source. It was found that its cytotoxicity toward cancer cells was enhanced with an increase in the concentration of NGO-FA-CuS and the incubation period.

Copper Sulfide Nanoassemblies for Catalytic and Photoresponsive Eradication of Bacteria from Infected Wounds

Bovine serum albumin (BSA)-encapsulated copper sulfide nanocrystals (CuS NCs) were prepared by heating an alkaline solution containing copper ions and BSA without an additional sulfur source. At a high BSA concentration (0.8 mM), nanoassembly of the as-formed CuS NCs occurs to form BSA-CuS NCs as a result of the formation of BSA gel-like structures. In addition to their intrinsic photothermal properties, the BSA-CuS NCs possess rich surface vacancies and thus exhibit enzyme-like and photodynamic activities. Spontaneous generation of hydrogen peroxide (H₂O₂) led to the in situ formation of copper peroxide (CPO) nanodots on the BSA-CuS NCs to catalyze singlet oxygen radical generation. The antimicrobial response was enhanced by >60-fold upon NIR laser irradiation, which was ascribed to the combined effect of the photodynamic and photothermal inactivation of bacteria. Furthermore, BSA-CuS NCs were transdermally administered onto a methicillin-resistant Staphylococcus aureus-infected wound and eradicated >99% of bacteria in just 1 min under NIR illumination due to the additional peroxidase-like activity of BSA-CuS NCs, transforming H₂O₂ at the infection site into hydroxyl radicals and thus increasing the synergistic effect from photodynamic and photothermal treatment. The BSA-CuS NCs exhibited insignificant in vitro cytotoxicity and hemolysis and thus can serve as highly biocompatible bactericides in preclinical applications to effectively eradicate bacteria.

Ultrasmall Ag2Te Quantum Dots with Rapid Clearance for Amplified Computed Tomography Imaging and Augmented Photonic Tumor Hyperthermia

With the fast development of nanomedicine, the imaging-guided and photo-induced cancer monotherapies can efficiently eliminate tumor lesions, which are strongly dependent on the construction of versatile theranostic nanoplatforms. Among diverse photo-converting nanoplatforms, silver chalcogenide nanoparticles feature high biocompatibility, narrow band gaps, and tunable optical properties, yet Ag₂Te-based nanosystems are still at a proof-of-concept stage, and the exploration of Ag₂Te-based nanosystems suitable for photonic tumor hyperthermia is challenging. Herein, we report on the construction of versatile ultrasmall Ag₂Te quantum dots (QDs) via a facile biomineralization strategy. Especially, these Ag₂Te QDs with negligible toxicity and excellent biocompatibility were developed for X-ray computed tomography (CT) imaging-guided photonic tumor hyperthermia by near-infrared (NIR) activation. The fabricated Ag₂Te QDs exhibited a high tumor suppression rate (94.3%) on 4T1 breast tumor animal models due to the high photothermal-conversion efficiency (50.5%). Mechanistically, Ag₂Te QDs were promising potential CT imaging agents for imaging guidance and monitoring during photonic hyperthermia. Importantly, Ag₂Te QDs were rapidly eliminated from the body via feces and urine because of their ultrasmall sizes. This work not only broadens the biomedical applications of silver chalcogenide-based theranostic nanosystems but also provides the paradigm of theranostic nanosystems with a photonic tumor hyperthermia effect and outstanding contrast enhancement of high-performance CT imaging.

Polyaniline Nanovesicles for Photoacoustic Imaging-Guided Photothermal-Chemo Synergistic Therapy in the Second Near-Infrared Window

Photoacoustic imaging-guided photothermal therapy in the second near-infrared (NIR-II) window shows promise for clinical deep-penetrating tumor phototheranostics. However, ideal photothermal agents in the NIR-II window are still rare. Here, the emeraldine salt of polyaniline (PANI-ES), especially synthesized by a one-pot enzymatic reaction on sodium bis(2-ethylhexyl) sulfosuccinate (AOT) vesicle surface (PANI-ES@AOT, λ_max  ≈ 1000 nm), exhibits excellent dispersion in physiological environment and remarkable photothermal ability at pH 6.5 (photothermal conversion efficiency of 43.9%). As a consequence of the enhanced permeability and retention effect of tumors and the doping-induced photothermal effect of PANI-ES@AOT, this pH-sensitive NIR-II photothermal agent allows tumor acidity phototheranostics with minimized pseudosignal readout and subdued normal tissue damage. Moreover, the enhanced fluidity of vesicle membrane triggered by heating is beneficial for drug release and allows precise synergistic therapy for an improved therapeutic effect. This study highlights the potential of template-oriented (or interface-confined) enzymatic polymerization reactions for the construction of conjugated polymers with desired biomedical applications.

Highly Efficient Photothermal Conversion of Ti3C2Tx/Ionic Liquid Gel Pen Ink for Smoothly Writing Ultrasensitive, Wide-Range Detecting, and Flexible Thermal Sensors

Photothermal conversion behavior has a vital application to disease therapy, water purification, or uncontacted heaters. The fabrication of high-performance photothermal conversion materials especially for near-infrared (NIR) light and microstructures has attracted a great deal of attention. Among numerous substances, MXene as a new type of 2D material with semi-metallic and unique electromagnetic properties presents a broader absorption of light and even a typical plasmonic absorption near the NIR-I area (808 nm), which has made it suitable for photothermal conversion. Here, we propose a facile approach for preparing a Ti₃C₂T_x/ionic liquid ink with a high photothermal conversion efficiency. The as-prepared ink has showed good wettability of various substrates as well as the high sensitivity of 808 nm NIR light irradiation and a wide range of thermal variation. After packing the ink into a gel pen refill, the flexible thermal chips could be easily obtained just by pen writing on the soft surface with the designed size, which also have become an optimal candidate for the thermal alarm system.

Nanomaterials for Nanotheranostics: Tuning Their Properties According to Disease Needs

Nanotheranostics is one of the biggest scientific breakthroughs in nanomedicine. Most of the currently available diagnosis and therapies are invasive, time-consuming, and associated with severe toxic side effects. Nanotheranostics, on the other hand, has the potential to bridge this gap by harnessing the capabilities of nanotechnology and nanomaterials for combined therapeutics and diagnostics with markedly enhanced efficacy. However, nanomaterial applications in nanotheranostics are still in its infancy. This is due to the fact that each disease has a particular microenvironment with well-defined characteristics, which promotes deeper selection criteria of nanomaterials to meet the disease needs. In this review, we have outlined how nanomaterials are designed and tailored for nanotheranostics of cancer and other diseases such as neurodegenerative, autoimmune (particularly on rheumatoid arthritis), and cardiovascular diseases. The penetrability and retention of a nanomaterial in the biological system, the therapeutic strategy used, and the imaging mode selected are some of the aspects discussed for each disease. The specific properties of the nanomaterials in terms of feasibility, physicochemical challenges, progress in clinical trials, its toxicity, and their future application on translational medicine are addressed. Our review meticulously and critically examines the applications of nanotheranostics with various nanomaterials, including graphene, across several diseases, offering a broader perspective of this emerging field.

Plasmonic Copper Sulfide Nanoparticles Enable Dark Contrast in Optical Coherence Tomography

Optical coherence tomography (OCT) is an imaging technique affording noninvasive optical biopsies. Like for other imaging techniques, the use of dedicated contrast agents helps better discerning biological features of interest during the clinical practice. Although bright OCT contrast agents have been developed, no dark counterpart has been proposed yet. Herein, plasmonic copper sulfide nanoparticles as the first OCT dark contrast agents working in the second optical transparency window are reported. These nanoparticles virtually possess no light scattering capabilities at the OCT working wavelength (≈1300 nm); thus, they exclusively absorb the probing light, which in turn results in dark contrast. The small size of the nanoparticles and the absence of apparent cytotoxicity support the amenability of this system to biomedical applications. Importantly, in the pursuit of systems apt to yield OCT dark contrast, a library of copper sulfide nanoparticles featuring plasmonic resonances spanning the three optical transparency windows is prepared, thus highlighting the versatility and potential of these systems in light-controlled biomedical applications.

PVP-coated Sb2Se3 nanorods as nanotheranostic agents for photoacoustic imaging and photothermal therapy in NIR-I bio-windows

Antimony selenide (Sb₂Se₃) as a simple, low toxicity, low-cost p-type semiconductor material with broad absorbance ranging from the UV to the NIR region has many potential applications in photovoltaic, thermoelectric, and phase-change memory devices. Owing to these excellent properties, Sb₂Se₃ nanorods were firstly synthesized with triphenylantimony and dibenzyldiselenide under solvothermal conditions. In order to enhance the biocompatibility of the Sb₂Se₃ nanorods, polyvinylpyrrolidone (PVP) was coated onto the surface of the Sb₂Se₃ nanorods to form PVP-coated Sb₂Se₃ nanorods. The cell viability of PVP-coated Sb₂Se₃ nanorods toward Hep-2 cells was assessed for 24 h using a Cell Counting Kit-8 (CCK-8) assay. The results showed that Hep-2 cells treated with PVP-coated Sb₂Se₃ nanorods were alive at a concentration as high as 100 μg mL⁻¹ in the absence of NIR irradiation. In vivo assessment confirmed that PVP-coated Sb₂Se₃ nanorods exhibited excellent photoacoustic imaging and PTT performance, which yielded complete ablation of tumors after laser irradiation (808 nm or 980 nm) in the NIR-I bio-window.

Herein we reported a biocompatible PVP-coated Sb₂Se₃ nanorods as PTT nanotheranostic agent, which is responsive to the light (808 and 980 nm) in NIR-I bio-windows and effective for photoacoustic imaging and photothermal destruction of cancer cell.

Yolk-Shell Structured Au Nanostar@Metal-Organic Framework for Synergistic Chemo-photothermal Therapy in the Second Near-Infrared Window

Light-sensitive yolk-shell nanoparticles (YSNs) as remote-controlled and stimuli-responsive theranostic platforms provide an attractive method for synergistic cancer therapy. Herein, a kind of novel stimuli-responsive multifunctional YSNs has been successfully constructed by integrating star-shaped gold (Au star) nanoparticles as the second near-infrared (NIR-II) photothermal yolks and biodegradable crystalline zeolitic imidazolate framework-8 (ZIF-8) as the shells. In this platform, a chemotherapeutic drug (doxorubicin hydrochloride, DOX) was encapsulated into the cavity, which can show the behavior of controlled release due to the degradation process of ZIF-8 in the mildly acidic tumor microenvironment. Upon the 1064 nm (NIR-II biowindow) laser irradiation, gold nanostar@ZIF-8 (Au@MOF) nanoparticles exhibited outstanding synergistic anticancer effect based on their photothermal and promoted cargo release properties. Moreover, the strong NIR region absorbance endows the Au@MOF of NIR thermal imaging and photoacoustic (PA) imaging properties. This work contributes to design a stimuli-responsive "all-in-one" nanocarrier that realizes bimodal imaging diagnosis and chemo-photothermal synergistic therapy.

Novel phthalocyanine-based polymeric micelles with high near-infrared photothermal conversion efficiency under 808 nm laser irradiation for in vivo cancer therapy

Photothermal therapy (PTT) has emerged as one of the promising methodologies for the treatment of cancer, and ideal photothermal agents need to be biodegradable and have strong optical absorbance in the near-infrared (NIR) optical window. Here, we report a new phthalocyanine molecule, 4OCSPC, which expands the absorbance edge to 850 nm. Under 808 nm NIR laser irradiation, 4OCSPC polymeric micelles showed robust photostability and a high photothermal conversion of 47.0%. Also, the 4OCSPC polymeric micelles exhibit a high in vivo PTT efficacy against 4T1 tumors in mice.