1
|
Eivazzadeh-Keihan R, Sadat Z, Lalebeigi F, Naderi N, Panahi L, Ganjali F, Mahdian S, Saadatidizaji Z, Mahdavi M, Chidar E, Soleimani E, Ghaee A, Maleki A, Zare I. Effects of mechanical properties of carbon-based nanocomposites on scaffolds for tissue engineering applications: a comprehensive review. Nanoscale Adv 2024; 6:337-366. [PMID: 38235087 PMCID: PMC10790973 DOI: 10.1039/d3na00554b] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 07/25/2023] [Accepted: 12/03/2023] [Indexed: 01/19/2024]
Abstract
Mechanical properties, such as elasticity modulus, tensile strength, elongation, hardness, density, creep, toughness, brittleness, durability, stiffness, creep rupture, corrosion and wear, a low coefficient of thermal expansion, and fatigue limit, are some of the most important features of a biomaterial in tissue engineering applications. Furthermore, the scaffolds used in tissue engineering must exhibit mechanical and biological behaviour close to the target tissue. Thus, a variety of materials has been studied for enhancing the mechanical performance of composites. Carbon-based nanostructures, such as graphene oxide (GO), reduced graphene oxide (rGO), carbon nanotubes (CNTs), fibrous carbon nanostructures, and nanodiamonds (NDs), have shown great potential for this purpose. This is owing to their biocompatibility, high chemical and physical stability, ease of functionalization, and numerous surface functional groups with the capability to form covalent bonds and electrostatic interactions with other components in the composite, thus significantly enhancing their mechanical properties. Considering the outstanding capabilities of carbon nanostructures in enhancing the mechanical properties of biocomposites and increasing their applicability in tissue engineering and the lack of comprehensive studies on their biosafety and role in increasing the mechanical behaviour of scaffolds, a comprehensive review on carbon nanostructures is provided in this study.
Collapse
Affiliation(s)
- Reza Eivazzadeh-Keihan
- Department of Chemistry, Catalysts and Organic Synthesis Research Laboratory, Iran University of Science and Technology Tehran 16846-13114 Iran
| | - Zahra Sadat
- Department of Chemistry, Catalysts and Organic Synthesis Research Laboratory, Iran University of Science and Technology Tehran 16846-13114 Iran
| | - Farnaz Lalebeigi
- Department of Chemistry, Catalysts and Organic Synthesis Research Laboratory, Iran University of Science and Technology Tehran 16846-13114 Iran
| | - Nooshin Naderi
- Department of Chemistry, Catalysts and Organic Synthesis Research Laboratory, Iran University of Science and Technology Tehran 16846-13114 Iran
| | - Leila Panahi
- Department of Chemistry, Catalysts and Organic Synthesis Research Laboratory, Iran University of Science and Technology Tehran 16846-13114 Iran
| | - Fatemeh Ganjali
- Department of Chemistry, Catalysts and Organic Synthesis Research Laboratory, Iran University of Science and Technology Tehran 16846-13114 Iran
| | - Sakineh Mahdian
- Department of Chemistry, Catalysts and Organic Synthesis Research Laboratory, Iran University of Science and Technology Tehran 16846-13114 Iran
| | - Zahra Saadatidizaji
- Department of Chemistry, Catalysts and Organic Synthesis Research Laboratory, Iran University of Science and Technology Tehran 16846-13114 Iran
| | - Mohammad Mahdavi
- Endocrinology and Metabolism Research Center, Endocrinology and Metabolism Clinical Sciences Institute, Tehran University of Medical Sciences Tehran Iran
| | - Elham Chidar
- Department of Chemistry, Catalysts and Organic Synthesis Research Laboratory, Iran University of Science and Technology Tehran 16846-13114 Iran
| | - Erfan Soleimani
- Department of Chemistry, Catalysts and Organic Synthesis Research Laboratory, Iran University of Science and Technology Tehran 16846-13114 Iran
| | - Azadeh Ghaee
- Department of Life Science Engineering, Faculty of New Sciences and Technologies, University of Tehran P.O. Box 14395-1561 Tehran Iran
| | - Ali Maleki
- Department of Chemistry, Catalysts and Organic Synthesis Research Laboratory, Iran University of Science and Technology Tehran 16846-13114 Iran
| | - Iman Zare
- Research and Development Department, Sina Medical Biochemistry Technologies Co. Ltd Shiraz 7178795844 Iran
| |
Collapse
|
2
|
Govindarajan D, Saravanan S, Sudhakar S, Vimalraj S. Graphene: A Multifaceted Carbon-Based Material for Bone Tissue Engineering Applications. ACS Omega 2024; 9:67-80. [PMID: 38222554 PMCID: PMC10785094 DOI: 10.1021/acsomega.3c07062] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 09/19/2023] [Revised: 11/30/2023] [Accepted: 12/04/2023] [Indexed: 01/16/2024]
Abstract
Tissue engineering is an emerging technological field that aims to restore and replace human tissues. A significant number of individuals require bone replacement annually as a result of skeletal abnormalities or accidents. In recent decades, notable progress has been made in the field of biomedical research, specifically in the realm of sophisticated and biocompatible materials. The purpose of these biomaterials is to facilitate bone tissue regeneration. Carbon nanomaterial-based scaffolds are particularly notable due to their accessibility, mechanical durability, and biofunctionality. The scaffolds exhibit the capacity to enhance cellular proliferation, mitigate cell damage, induce bone tissue growth, and maintain biological compatibility. Therefore, they play a crucial role in the development of the bone matrix and the necessary cellular interactions required for bone tissue restoration. The attachment, growth, and specialization of osteogenic stem cells on biomaterial scaffolds play critical roles in bone tissue engineering. The optimal biomaterial should facilitate the development of bone tissue in a manner that closely resembles that of human bone. This comprehensive review encompasses the examination of graphene oxide (GO), carbon nanotubes (CNTs), fullerenes, carbon dots (CDs), nanodiamonds, and their respective derivatives. The biomaterial frameworks possess the ability to replicate the intricate characteristics of the bone microenvironment, thereby rendering them suitable for utilization in tissue engineering endeavors.
Collapse
Affiliation(s)
- Dharunya Govindarajan
- Department
of Biotechnology, Stem Cell and Molecular Biology Laboratory, Bhupat
& Jyoti Mehta School of Biosciences, Indian Institute of Technology-Madras, Chennai 600 036, Tamil Nadu, India
| | - Sekaran Saravanan
- Department
of Prosthodontics, Saveetha Dental College and Hospital, Saveetha
Institute of Medical and Technical Sciences (SIMATS), Saveetha University, Chennai 600 077, Tamil Nadu, India
| | - Swathi Sudhakar
- Department
of Applied Mechanics and Biomedical Engineering, Indian Institute of Technology-Madras, Chennai 600 036, Tamil Nadu, India
| | - Selvaraj Vimalraj
- Department
of Applied Mechanics and Biomedical Engineering, Indian Institute of Technology-Madras, Chennai 600 036, Tamil Nadu, India
| |
Collapse
|
3
|
Khan MUA, Stojanović GM, Abdullah MFB, Dolatshahi-Pirouz A, Marei HE, Ashammakhi N, Hasan A. Fundamental properties of smart hydrogels for tissue engineering applications: A review. Int J Biol Macromol 2024; 254:127882. [PMID: 37951446 DOI: 10.1016/j.ijbiomac.2023.127882] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/04/2023] [Revised: 10/22/2023] [Accepted: 11/02/2023] [Indexed: 11/14/2023]
Abstract
Tissue engineering is an advanced and potential biomedical approach to treat patients suffering from lost or failed an organ or tissue to repair and regenerate damaged tissues that increase life expectancy. The biopolymers have been used to fabricate smart hydrogels to repair damaged tissue as they imitate the extracellular matrix (ECM) with intricate structural and functional characteristics. These hydrogels offer desired and controllable qualities, such as tunable mechanical stiffness and strength, inherent adaptability and biocompatibility, swellability, and biodegradability, all crucial for tissue engineering. Smart hydrogels provide a superior cellular environment for tissue engineering, enabling the generation of cutting-edge synthetic tissues due to their special qualities, such as stimuli sensitivity and reactivity. Numerous review articles have presented the exceptional potential of hydrogels for various biomedical applications, including drug delivery, regenerative medicine, and tissue engineering. Still, it is essential to write a comprehensive review article on smart hydrogels that successfully addresses the essential challenging issues in tissue engineering. Hence, the recent development on smart hydrogel for state-of-the-art tissue engineering conferred progress, highlighting significant challenges and future perspectives. This review discusses recent advances in smart hydrogels fabricated from biological macromolecules and their use for advanced tissue engineering. It also provides critical insight, emphasizing future research directions and progress in tissue engineering.
Collapse
Affiliation(s)
- Muhammad Umar Aslam Khan
- Department of Mechanical and Industrial Engineering, Qatar University, Doha 2713, Qatar; Biomedical Research Center, Qatar University, Doha 2713, Qatar.
| | - Goran M Stojanović
- Department of Electronics, Faculty of Technical Sciences, University of Novi Sad, 21000 Novi Sad, Serbia
| | - Mohd Faizal Bin Abdullah
- Oral and Maxillofacial Surgery Unit, School of Dental Sciences, Universiti Sains Malaysia, Health Campus, 16150, Kubang Kerian, Kota Bharu, Kelantan, Malaysia; Oral and Maxillofacial Surgery Unit, Hospital Universiti Sains Malaysia, Universiti Sains Malaysia, Health Campus, 16150, Kubang Kerian, Kota Bharu, Kelantan, Malaysia.
| | | | - Hany E Marei
- Department of Cytology and Histology, Faculty of Veterinary Medicine, Mansoura University, Mansoura, Egypt
| | - Nureddin Ashammakhi
- Institute for Quantitative Health Science and Engineering (IQ), Department of Biomedical Engineering, College of Engineering and Human Medicine, Michigan State University, East Lansing, MI 48824, USA.
| | - Anwarul Hasan
- Department of Mechanical and Industrial Engineering, Qatar University, Doha 2713, Qatar; Biomedical Research Center, Qatar University, Doha 2713, Qatar
| |
Collapse
|
4
|
Hajishoreh NK, Jamalpoor Z, Rasouli R, Asl AN, Sheervalilou R, Akbarzadeh A. The recent development of carbon-based nanoparticles as a novel approach to skin tissue care and management - A review. Exp Cell Res 2023; 433:113821. [PMID: 37858837 DOI: 10.1016/j.yexcr.2023.113821] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/24/2023] [Revised: 10/11/2023] [Accepted: 10/14/2023] [Indexed: 10/21/2023]
Abstract
Since the skin is the first barrier of the body's defense against pathogens, delays in the healing process are affected by infections. Therefore, applying advanced substitute assistance improves the patient's quality of life. Carbon-based nanomaterials show better capabilities than conventional methods for managing skin wound infections. Due to their physicochemical properties such as small size, large surface area, great surface-to-volume ratio, and excellent ability to communicate with the cells and tissue, carbon-based nanoparticles have been considered in regenerative medicine. moreover, the carbon nano family offers attractive potential in wound healing via the improvement of angiogenesis and antibacterial compared to traditional approaches become one of the particular research interests in the field of skin tissue engineering. This review emphasizes the wound-healing process and the role of carbon-based nanoparticles in wound care management interaction with tissue engineering technology.
Collapse
Affiliation(s)
| | - Zahra Jamalpoor
- Trauma research center, Aja University of Medical Sciences, Tehran, Iran.
| | - Ramin Rasouli
- Health Research Center Chamran Hospital, Tehran, Iran.
| | - Amir Nezami Asl
- Health Research Center Chamran Hospital, Tehran, Iran; Trauma research center, Aja University of Medical Sciences, Tehran, Iran.
| | - Roghayeh Sheervalilou
- Pharmacology Research Center, Zahedan University of Medical Sciences, Zahedan, Iran.
| | - Abolfazl Akbarzadeh
- Department of Medical Nanotechnology, Faculty of Advanced Medical Sciences, Tabriz University of Medical Sciences, Tabriz, Iran.
| |
Collapse
|
5
|
Li T, Peng Z, Lv Q, Li L, Zhang C, Pang L, Zhang C, Li Y, Chen Y, Tang X. SLS 3D Printing To Fabricate Poly(vinyl alcohol)/Hydroxyapatite Bioactive Composite Porous Scaffolds and Their Bone Defect Repair Property. ACS Biomater Sci Eng 2023; 9:6734-6744. [PMID: 37939039 DOI: 10.1021/acsbiomaterials.3c01014] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2023]
Abstract
Poly(vinyl alcohol) (PVA) exhibits a wide range of potential applications in the biomedical field due to its favorable mechanical properties and biocompatibility. However, few studies have been carried out on selective laser sintering (SLS) of PVA due to its poor thermal processability. In this study, in order to impart PVA powder the excellent thermal processability, the molecular complexation technology was performed to destroy the strong hydrogen bonds in PVA and thus significantly reduced the PVA melting point and crystallinity to 190.9 °C and 27.9%, respectively. The modified PVA (MPVA) was then compounded with hydroxyapatite (HA) to prepare PVA/HA composite powders suitable for SLS 3D printing. The final SLS 3D-printed MPVA/HA composite porous scaffolds show high precision and interconnected pores with a porosity as high as 68.3%. The in vitro cell culture experiments revealed that the sintered composite scaffolds could significantly promote the adhesion and proliferation of osteoblasts and facilitate bone regeneration, and the quantitative real-time polymerase chain reaction results further demonstrate that the printed MPVA/20HA scaffold could significantly enhance the expression levels of both early osteogenic-specific marker of alkaline phosphatase stain and runt-related transcription factor 2. Meanwhile, in in vivo experiments, it is encouragingly found that the resultant MPVA/20HA SLS 3D-printed part has an obvious effect on promoting the growth of new bone tissue as well as a better bone regeneration capability. This work could provide a promising strategy for fabrication of PVA scaffolds through SLS 3D printing, exhibiting a great potential for clinical applications in bone tissue engineering.
Collapse
Affiliation(s)
- Tao Li
- Sports Medicine Center, West China Hospital, Sichuan University, Chengdu 610065, China
- Department of Orthopedics and Orthopedic Research Institute, West China Hospital, Sichuan University, Chengdu 610065, China
| | - Zilin Peng
- The State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute of Sichuan University, Chengdu 610065, China
| | - Qinniu Lv
- The State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute of Sichuan University, Chengdu 610065, China
| | - Li Li
- The State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute of Sichuan University, Chengdu 610065, China
| | - Chuhong Zhang
- The State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute of Sichuan University, Chengdu 610065, China
| | - Long Pang
- Sports Medicine Center, West China Hospital, Sichuan University, Chengdu 610065, China
- Department of Orthopedics and Orthopedic Research Institute, West China Hospital, Sichuan University, Chengdu 610065, China
| | - Chunsen Zhang
- Sports Medicine Center, West China Hospital, Sichuan University, Chengdu 610065, China
- Department of Orthopedics and Orthopedic Research Institute, West China Hospital, Sichuan University, Chengdu 610065, China
| | - Yinghao Li
- Sports Medicine Center, West China Hospital, Sichuan University, Chengdu 610065, China
- Department of Orthopedics and Orthopedic Research Institute, West China Hospital, Sichuan University, Chengdu 610065, China
| | - Yinghong Chen
- The State Key Laboratory of Polymer Materials Engineering, Polymer Research Institute of Sichuan University, Chengdu 610065, China
| | - Xin Tang
- Sports Medicine Center, West China Hospital, Sichuan University, Chengdu 610065, China
- Department of Orthopedics and Orthopedic Research Institute, West China Hospital, Sichuan University, Chengdu 610065, China
| |
Collapse
|
6
|
Khan MUA, Stojanović GM, Rehman RA, Moradi AR, Rizwan M, Ashammakhi N, Hasan A. Graphene Oxide-Functionalized Bacterial Cellulose-Gelatin Hydrogel with Curcumin Release and Kinetics: In Vitro Biological Evaluation. ACS Omega 2023; 8:40024-40035. [PMID: 37929099 PMCID: PMC10620874 DOI: 10.1021/acsomega.2c06825] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/23/2022] [Accepted: 05/05/2023] [Indexed: 11/07/2023]
Abstract
Biopolymer-based bioactive hydrogels are excellent wound dressing materials for wound healing applications. They have excellent properties, including hydrophilicity, tunable mechanical and morphological properties, controllable functionality, biodegradability, and desirable biocompatibility. The bioactive hydrogels were fabricated from bacterial cellulose (BC), gelatin, and graphene oxide (GO). The GO-functionalized-BC (GO-f-BC) was synthesized by a hydrothermal method and chemically crosslinked with bacterial cellulose and gelatin using tetraethyl orthosilicate (TEOS) as a crosslinker. The structural, morphological, and wettability properties were studied using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and a universal testing machine (UTM), respectively. The swelling analysis was conducted in different media, and aqueous medium exhibited maximum hydrogel swelling compared to other media. The Franz diffusion method was used to study curcumin (Cur) release (Max = 69.32%, Min = 49.32%), and Cur release kinetics followed the Hixson-Crowell model. Fibroblast (3T3) cell lines were employed to determine the cell viability and proliferation to bioactive hydrogels. Antibacterial activities of bioactive hydrogels were evaluated against infection-causing bacterial strains. Bioactive hydrogels are hemocompatible due to their less than 0.5% hemolysis against fresh human blood. The results show that bioactive hydrogels can be potential wound dressing materials for wound healing applications.
Collapse
Affiliation(s)
- Muhammad Umar Aslam Khan
- Department
of Mechanical and Industrial Engineering, Qatar University, Doha 2713, Qatar
- Biomedical
Research Center, Qatar University, Doha 2713, Qatar
| | - Goran M. Stojanović
- Department
of Electronics, Faculty of Technical Sciences, University of Novi Sad, 21000 Novi Sad, Serbia
| | - Roselinda Ab Rehman
- Oral
and Maxillofacial Surgery Unit, School of Dental Sciences, Universiti Sains Malaysia, Health Campus, 16150 Kubang Kerian, Kelantan, Malaysia
| | - Ali-Reza Moradi
- Department
of Physics, Institute for Advanced Studies
in Basic Sciences (IASBS), Zanjan 45137-66731, Iran
| | - Muhammad Rizwan
- Department
of Chemistry, Universiti Malaya, 50603 Kuala Lumpur, Malaysia
| | - Nureddin Ashammakhi
- Department
of Biomedical Engineering and the Institute for Quantitative Health
Science & Engineering, Michigan State
University, East Lansing, Michigan 48824, United States
| | - Anwarul Hasan
- Department
of Mechanical and Industrial Engineering, Qatar University, Doha 2713, Qatar
- Biomedical
Research Center, Qatar University, Doha 2713, Qatar
| |
Collapse
|
7
|
Khan MA, Stojanović GM, Hassan R, Anand TJS, Al-Ejji M, Hasan A. Role of Graphene Oxide in Bacterial Cellulose-Gelatin Hydrogels for Wound Dressing Applications. ACS Omega 2023; 8:15909-15919. [PMID: 37179612 PMCID: PMC10173314 DOI: 10.1021/acsomega.2c07279] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 11/13/2022] [Accepted: 03/01/2023] [Indexed: 05/15/2023]
Abstract
Biopolymer-based hydrogels have several advantages, including robust mechanical tunability, high biocompatibility, and excellent optical properties. These hydrogels can be ideal wound dressing materials and advantageous to repair and regenerate skin wounds. In this work, we prepared composite hydrogels by blending gelatin and graphene oxide-functionalized bacterial cellulose (GO-f-BC) with tetraethyl orthosilicate (TEOS). The hydrogels were characterized using Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), atomic force microscope (AFM), and water contact angle analyses to explore functional groups and their interactions, surface morphology, and wetting behavior, respectively. The swelling, biodegradation, and water retention were tested to respond to the biofluid. Maximum swelling was exhibited by GBG-1 (0.01 mg GO amount) in all media (aqueous = 1902.83%, PBS = 1546.63%, and electrolyte = 1367.32%). All hydrogels were hemocompatible, as their hemolysis was less than 0.5%, and blood coagulation time decreased as the hydrogel concentration and GO amount increased under in vitro standard conditions. These hydrogels exhibited unusual antimicrobial activities against Gram-positive and Gram-negative bacterial strains. The cell viability and proliferation were increased with an increased GO amount, and maximum values were found for GBG-4 (0.04 mg GO amount) against fibroblast (3T3) cell lines. The mature and well-adhered cell morphology of 3T3 cells was found for all hydrogel samples. Based on all findings, these hydrogels would be a potential wound dressing skin material for wound healing applications.
Collapse
Affiliation(s)
- Muhammad
Umar Aslam Khan
- Biomedical
Research Center, Qatar University, Doha 2713, Qatar
- Department
of Mechanical and Industrial Engineering, Qatar University, Doha 2713, Qatar
| | - Goran M. Stojanović
- Faculty
of Technical Sciences, University of Novi
Sad, T. Dositeja Obradovi’ca 6, 21000 Novi Sad, Serbia
| | - Rozita Hassan
- Orthodontic
Unit, School of Dental Science, Universiti
Sains Malaysia, Kubang
Kerian, Kelantan 16150, Malaysia
| | - T. Joseph Sahaya Anand
- Sustainable
and Responsive Manufacturing Group, Faculty of Mechanical and Manufacturing
Engineering Technology, Universiti Teknikal
Malaysia Melaka, Hang Tuah Jaya, Melaka 76100, Malacca, Malaysia
| | - Maryam Al-Ejji
- Center for
Advanced Materials, Qatar University, Doha 2713, Qatar
| | - Anwarul Hasan
- Biomedical
Research Center, Qatar University, Doha 2713, Qatar
- Department
of Mechanical and Industrial Engineering, Qatar University, Doha 2713, Qatar
| |
Collapse
|
8
|
Ninsiima HI, Eze ED, Ssekatawa K, Nalugo H, Asekenye C, Onanyang D, Munanura EI, Ariong M, Matama K, Zirintunda G, Mbiydzenyuy NE, Ssempijja F, Afodun AM, Mujinya R, Usman IM, Asiimwe OH, Tibyangye J, Kasozi KI. Green tea silver nanoparticles improve physiological motor and cognitive function in BALB/c mice during inflammation. Heliyon 2023; 9:e13922. [PMID: 36873543 DOI: 10.1016/j.heliyon.2023.e13922] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/12/2022] [Revised: 02/08/2023] [Accepted: 02/16/2023] [Indexed: 02/24/2023] Open
Abstract
Information on the basic changes associated with green tea small molecules in acute inflammation is deficient. The purpose of the study was to characterize and establish the effects of green tea silver nanoparticles (AgNPs) following inflammation in BALB/c male mice. In this study, green tea silver nitrate nanoparticles were characterized and the extract were made up to constitute high (100%), medium (10%), and low (1%) concentrations for administration. Acute inflammation was induced in groups I-V of the experimental rodents by injecting 0.5 ml/kg of fresh egg albumin on the subplantar surface of the right hind paw and animals were monitored for 36 h. Group I-III were administered 100%, 10%, 1% green tea nanoparticles extract while group IV was given diclofenac. Group V was the positive control while group VI was the negative control that received the vehicle. Paw edema was measured at a 2 h interval for 3 days, while the pain was assessed by measuring the locomotion activity using the voluntary wheel running and the anxiety-like behavior. Hypersensitivity was measured through the temperature sensation experiment and a non-linear regression analysis was done. Here, synthesized green tea AgNPs registered an absorbance band at 460 nm, phytochemicals due to presence of organic functional groups of O[bond, double bond]C[bond, double bond]O of oxycarbons, of C[bond, double bond]C of a conjugate alkene, C[bond, double bond]O of a stretching bond of a secondary alcohol. The silver green tea nanoparticles were spherical, covered by a slimy layer, capped and stable. Green tea AgNPs significantly decreased temperature hypersensitivity in BALB/c male mice and this demonstrated their protective effects. Low concentrations of green tea nanoparticles inhibited edema thus mimicking effects of diclofenac, however, the percentage of inhibition was highest in medium and high silver-tea nanoparticles concentrations demonstration the importance of concentration in therapeutics. Anxiety was lowest in BALB/c male mice treated with high concentrations of silver green tea nanoparticles, and this led to increased locomotory activity in mice. Green tea AgNPs have strong anti-inflammatory effects at high concentrations. Concentrations of green tea AgNPs modulated basic sensory and motor behaviors in BALB/c male mice demonstrating their importance in complementary and integrative medical practice.
Collapse
|
9
|
Al-Arjan WS. Self-Assembled Nanofibrous Membranes by Electrospinning as Efficient Dye Photocatalysts for Wastewater Treatment. Polymers (Basel) 2023; 15:polym15020340. [PMID: 36679221 PMCID: PMC9864269 DOI: 10.3390/polym15020340] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/13/2022] [Revised: 12/26/2022] [Accepted: 01/03/2023] [Indexed: 01/11/2023] Open
Abstract
Water pollution has become a leading problem due to industrial development and the resulting waste, which causes water contamination. Different materials and techniques have been developed to treat wastewater. Due to their self-assembly and photocatalytic behavior, membranes based on graphene oxide (GO) are ideal composite materials for wastewater treatment. We fabricated composite membranes from polylactic acid (PLA) and carboxylic methyl cellulose (CMC)/carboxyl-functionalized graphene oxide (GO-f-COOH) using the electrospinning technique and the thermal method. Then, a nanofibrous membrane (PLA/CMC/GO-f-COOH@Ag) was produced by loading with silver nanoparticles (Ag-NPs) to study its photocatalytic behavior. These membranes were characterized using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) in order to investigate the behavior of the fabricated membranes. The degradation kinetics studies were conducted using mathematical models, such as the pseudo first- and second-order models, by calculating their regression coefficients (R2). These membranes exhibited exceptional dye degradation kinetics. The R2 values for pseudo first order were PCGC = 0.983581, PCGC@Ag = 0.992917, and the R2 values for pseudo second order were PCGC = 0.978329, PCGC@Ag = 0.989839 for methylene blue. The degradation kinetics of Rh-B showed R2 values of PCGC = 0.973594, PCGC@Ag = 0.989832 for pseudo first order and R2 values of PCGC = 0.994392, PCGC@Ag = 0.998738 for pseudo second order. The fabricated nanofibrous membranes exhibited a strong π-π electrostatic interaction, thus providing a large surface area, and demonstrated efficient photocatalytic behavior for treating organic dyes present in wastewater. The fabricated PLA/CMC/GO-f-COOH@Ag membrane presents exceptional photocatalytic properties for the catalytic degradation of methylene blue (MB) dye. Hence, the fabricated nanofibrous membrane would be an eco-friendly system for wastewater treatment under catalytic reaction.
Collapse
Affiliation(s)
- Wafa Shamsan Al-Arjan
- Department of Chemistry, College of Science, King Faisal University, P.O. Box 400, Hufof 31982, Al-Ahsa, Saudi Arabia
| |
Collapse
|
10
|
Serrano-Aroca Á, Cano-Vicent A, Sabater i Serra R, El-Tanani M, Aljabali A, Tambuwala MM, Mishra YK. Scaffolds in the microbial resistant era: Fabrication, materials, properties and tissue engineering applications. Mater Today Bio 2022; 16:100412. [PMID: 36097597 PMCID: PMC9463390 DOI: 10.1016/j.mtbio.2022.100412] [Citation(s) in RCA: 19] [Impact Index Per Article: 9.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/06/2022] [Revised: 08/23/2022] [Accepted: 08/24/2022] [Indexed: 11/08/2022] Open
Abstract
Due to microbial infections dramatically affect cell survival and increase the risk of implant failure, scaffolds produced with antimicrobial materials are now much more likely to be successful. Multidrug-resistant infections without suitable prevention strategies are increasing at an alarming rate. The ability of cells to organize, develop, differentiate, produce a functioning extracellular matrix (ECM) and create new functional tissue can all be controlled by careful control of the extracellular microenvironment. This review covers the present state of advanced strategies to develop scaffolds with antimicrobial properties for bone, oral tissue, skin, muscle, nerve, trachea, cardiac and other tissue engineering applications. The review focuses on the development of antimicrobial scaffolds against bacteria and fungi using a wide range of materials, including polymers, biopolymers, glass, ceramics and antimicrobials agents such as antibiotics, antiseptics, antimicrobial polymers, peptides, metals, carbon nanomaterials, combinatorial strategies, and includes discussions on the antimicrobial mechanisms involved in these antimicrobial approaches. The toxicological aspects of these advanced scaffolds are also analyzed to ensure future technological transfer to clinics. The main antimicrobial methods of characterizing scaffolds’ antimicrobial and antibiofilm properties are described. The production methods of these porous supports, such as electrospinning, phase separation, gas foaming, the porogen method, polymerization in solution, fiber mesh coating, self-assembly, membrane lamination, freeze drying, 3D printing and bioprinting, among others, are also included in this article. These important advances in antimicrobial materials-based scaffolds for regenerative medicine offer many new promising avenues to the material design and tissue-engineering communities. Antibacterial, antifungal and antibiofilm scaffolds. Antimicrobial scaffold fabrication techniques. Antimicrobial biomaterials for tissue engineering applications. Antimicrobial characterization methods of scaffolds. Bone, oral tissue, skin, muscle, nerve, trachea, cardiac, among other applications.
Collapse
|
11
|
Khan MUA, Al-Arjan WS, Ashammakhi N, Haider S, Amin R, Hasan A. Multifunctional Bioactive Scaffolds from ARX- g-(Zn@rGO)-HAp for Bone Tissue Engineering: In Vitro Antibacterial, Antitumor, and Biocompatibility Evaluations. ACS Appl Bio Mater 2022; 5:5445-5456. [PMID: 36215135 DOI: 10.1021/acsabm.2c00777] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/25/2023]
Abstract
Advanced biomaterials are required with enhanced antibacterial and anticancer activities to obtain desirable biocompatibility during and after scaffold implantation in tissue engineering. Here, we report the development of a nanosystem by the hydrothermal method using different zinc (Zn) amounts and reduced graphene oxide (GO). Arabinoxylan, the nanosystem (Zn@rGO), and nanohydroxyapatite polymeric nanocomposites ARX-g-(Zn@rGO)/HAp were prepared by the free radical polymerization method, and porous bioactive scaffolds were fabricated via the freeze-drying technique. The structural, morphological, and elemental analyses of the bioactive scaffolds were conducted using Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray analysis. The wetting behavior was studied by a water contact meter and swelling in aqueous and phosphate-buffered saline solutions at 37 °C. The degradation was also studied in the phosphate-buffered saline solution at 37 °C. The increase in Zn content increased the pore size, and hydrophobic behavior shifted to hydrophilic (AGZ-1 = 131.40° at 0 s and 120.60° at 10 s to AGZ-1 = 81.30° at 0 s and 69.20° at 10 s) with the increase in contact time. Maximum swelling was observed in deionized water (AGZ-1 = 52.87%, AGZ-4 = 90.20%), followed by phosphate-buffered saline (PBS; AGZ-1 = 44.80%, AGZ-4 = 67.90%) and electrolyte (AGZ-1 = 32.40%, AGZ-4 = 63.47%), and biodegradation in PBS media increased (AGZ-1 = 36.80%, AGZ-4 = 55.92%). Antimicrobial activities against severe infection-causing pathogens and antitumor activity against U87 cell lines showed exceptional results. Cell viability and cell proliferation studies were conducted against preosteoblast cell lines, and increased cell viability and proliferation were observed from AGZ-1 to AGZ-4. Antimicrobial and anticancer activities were enhanced with the increase of Zn content in the Zn@rGO system. The bioactive scaffolds with different formulations could be potential biomaterials to treat and regenerate defected bone tissue.
Collapse
Affiliation(s)
- Muhammad Umar Aslam Khan
- Biomedical Research Center, Qatar University, Doha2713, Qatar.,Department of Mechanical and Industrial Engineering, Qatar University, Doha2713, Qatar
| | - Wafa Shamsan Al-Arjan
- Department of Chemistry, College of Science, King Faisal University, P.O. Box 400, Al-Ahsa31982, Saudi Arabia
| | - Nureddin Ashammakhi
- Institute for Quantitative Health Science and Engineering (IQ) and Department of Biomedical Engineering, Michigan State University, East Lansing, Michigan48824, United States
| | - Sajjad Haider
- Department of Chemical Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh11421, Saudi Arabia
| | - Rashid Amin
- Department of Biology, College of Sciences, University of Hafr Al Batin, Hafar Al Batin39524, Saudi Arabia
| | - Anwarul Hasan
- Biomedical Research Center, Qatar University, Doha2713, Qatar.,Department of Mechanical and Industrial Engineering, Qatar University, Doha2713, Qatar
| |
Collapse
|
12
|
Avcu E, Bastan FE, Guney M, Avcu YY, Rehman MAU, Boccaccini AR. Biodegradable Polymer Matrix Composites Containing Graphene-Related Materials for Antibacterial Applications: A Critical Review. Acta Biomater 2022. [DOI: 10.1016/j.actbio.2022.07.048] [Citation(s) in RCA: 2] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/26/2022] [Revised: 07/23/2022] [Accepted: 07/26/2022] [Indexed: 12/25/2022]
|
13
|
Suo L, Xue Z, Wang P, Wu H, Chen Y, Shen J. Improvement of osteogenic properties using a 3D-printed graphene oxide/hyaluronic acid/chitosan composite scaffold. J BIOACT COMPAT POL 2022. [DOI: 10.1177/08839115221104072] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
Abstract
Oral and maxillofacial tumors, trauma and infections are the main causes of jaw defects, whose clinical treatment is very complicated. With the development of biological tissue engineering, many biological materials have been widely used in various fields of stomatology, and they play a very important role in the repair and replacement of maxillofacial bone defects. In this study, we intended to prepare a graphene oxide/hyaluronic acid/chitosan (GO/HA/CS) composite hydrogel with different mass ratios of GO: 0.1% (0.1% GO/HA/CS), 0.25% (0.25% GO/HA/CS), 0.5% (0.5% GO/HA/CS), and 1% (1% GO/HA/CS), prepare it into a multilayered and stable composite scaffold through 3D-printing technology, observe the surface morphology of the composite scaffold through scanning electron microscopy (SEM), and then test its physical and chemical properties, mechanical properties, water swelling rate, in vitro degradation and other material properties. Moreover, the biological performance of the GO/HA/CS composite scaffold was studied through experiments, such as cell morphology observation, cell adhesion, cell proliferation, and live-dead cell staining. The results showed that through chemical cross-linking and 3D-printing technology, a porous (pore size: 450–580 μm) and multilayered GO/HA/CS biological scaffold could be successfully constructed, and its surface was an interconnected microporous structure, and the porosity decreased (94%−40%) gradually with the increase of GO. Meanwhile, with the change in GO concentration, some mechanical properties of the scaffold could be improved, such as water swelling rate, degradation rate, and elastic modulus. In addition, the composite scaffold with the appropriate amount of GO had almost no cytotoxicity and could promote cell growth and proliferation, especially 0.25% GO/HA/CS composite scaffold. Consequently, the 0.25% GO/HA/CS composite scaffold had excellent biological material properties and good biocompatibility with osteoblasts, which may provide a new idea for the repair of jaw defects.
Collapse
Affiliation(s)
- Lai Suo
- Department of International VIP Dental Clinic, Tianjin Stomatological Hospital, School of Medicine, Nankai University, Tianjin, China
| | - Zhijun Xue
- Department II of Endodontics, Tianjin Stomatological Hospital, School of Medicine, Nankai University, Tianjin, China
| | - Puyu Wang
- Department II of Endodontics, Tianjin Stomatological Hospital, School of Medicine, Nankai University, Tianjin, China
| | - Hongshan Wu
- School of Medicine, Nankai University, Tianjin, China
| | - Yao Chen
- Department II of Endodontics, Tianjin Stomatological Hospital, School of Medicine, Nankai University, Tianjin, China
| | - Jing Shen
- Department of International VIP Dental Clinic, Tianjin Stomatological Hospital, School of Medicine, Nankai University, Tianjin, China
| |
Collapse
|
14
|
Segovia-huarcaya JJ, Valentin-soto LS, Herrera-calderon O, Fuertes-ruitón CM, Pari-olarte JB, Loyola-gonzales E, Almeida-galindo JS, Kong-chirinos JF, Melgar-merino EJ, Alshahrani MM, Mahmud S, Ali I. Chemical Characterization, Antioxidant, and Antihyperglycemic Capacity of Ferulated Arabinoxylan Extracted from “Chicha de Jora” Bagasse: An Ancestral Fermented Beverage from Zea mays L. J FOOD QUALITY 2022; 2022:1-16. [DOI: 10.1155/2022/4015886] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022] Open
Abstract
Bagasse is a byproduct generated during the process of making the traditional Andean drink named “chicha de jora” in Peru, which is a potential source for the extraction of ferulated arabinoxylan (FAX). The aim of this study was to extract and characterize the FAX from bagasse and determine its antioxidant and antihyperglycemic capacity in vitro. As a result, FAX of molecular weight ≥3.5 kDa presented moisture content, pH, total ash, proteins, and total phenolic content with values of 8.00%, 5.81, 2.68%, 3.78%, and 5.72 mg EAG/g, respectively. Thin-layer chromatography identified the monosaccharides L-arabinose and D-xylose. HPLC-MS/MS analysis of FAX confirmed the presence of methyl-pentofuranosides or methyl-pentopyranosides. The FT-IR spectrum presented characteristic bands of FAX. The FAX showed antioxidant capacity determined by the DPPH assay (IC50 = 6.59 mg/mL and TEAC = 7.7844 μmol/g sample), ABTS (IC50 = 6.50 mg/mL and TEAC 35.34 μmol/g sample), and FRAP (14.08 μmol AA/g and 36.63 μmol FeSO4/g). On the other hand, FAX showed glucose adsorption capacity, inhibition of glucose diffusion, and inhibition of the enzyme α-amylase (IC50 = 4.73 mg/mL). The results showed that the FAX extracted from the bagasse generated during the production of the “chicha de jora” has in vitro antioxidant and antihyperglycemic capacity.
Collapse
|
15
|
Al-Arjan WS, Khan MUA, Almutairi HH, Alharbi SM, Razak SIA. pH-Responsive PVA/BC- f-GO Dressing Materials for Burn and Chronic Wound Healing with Curcumin Release Kinetics. Polymers (Basel) 2022; 14:1949. [PMID: 35631834 DOI: 10.3390/polym14101949] [Citation(s) in RCA: 26] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/16/2022] [Revised: 05/02/2022] [Accepted: 05/06/2022] [Indexed: 02/04/2023] Open
Abstract
Polymeric materials have been essential biomaterials to develop hydrogels as wound dressings for sustained drug delivery and chronic wound healing. The microenvironment for wound healing is created by biocompatibility, bioactivity, and physicochemical behavior. Moreover, a bacterial infection often causes the healing process. The bacterial cellulose (BC) was functionalized using graphene oxide (GO) by hydrothermal method to have bacterial cellulose-functionalized-Graphene oxide (BC-f-GO). A simple blending method was used to crosslink BC-f-GO with polyvinyl alcohol (PVA) by tetraethyl orthosilicate (TEOS) as a crosslinker. The structural, morphological, wetting, and mechanical tests were conducted using Fourier-transform infrared spectroscopy (FTIR), Scanning electron microscope (SEM), water contact angle, and a Universal testing machine (UTM). The release of Silver-sulphadiazine and drug release kinetics were studied at various pH levels and using different mathematical models (zero-order, first-order, Higuchi, Hixson, Korsmeyer–Peppas, and Baker–Lonsdale). The antibacterial properties were conducted against Gram-positive and Gram-negative severe infection-causing pathogens. These composite hydrogels presented potential anticancer activities against the U87 cell line by an increased GO amount. The result findings show that these composite hydrogels have physical-mechanical and inherent antimicrobial properties and controlled drug release, making them an ideal approach for skin wound healing. As a result, these hydrogels were discovered to be an ideal biomaterial for skin wound healing.
Collapse
|
16
|
Khan MUA, Razak SIA, Hassan A, Qureshi S, Stojanović GM, Ihsan-Ul-Haq. Multifunctional Arabinoxylan-functionalized-Graphene Oxide Based Composite Hydrogel for Skin Tissue Engineering. Front Bioeng Biotechnol 2022; 10:865059. [PMID: 35573248 PMCID: PMC9093069 DOI: 10.3389/fbioe.2022.865059] [Citation(s) in RCA: 18] [Impact Index Per Article: 9.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/29/2022] [Accepted: 03/21/2022] [Indexed: 12/13/2022] Open
Abstract
Wound healing is an important physiological process involving a series of cellular and molecular developments. A multifunctional hydrogel that prevents infection and promotes wound healing has great significance for wound healing applications in biomedical engineering. We have functionalized arabinoxylan and graphene oxide (GO) using the hydrothermal method, through cross-linking GO-arabinoxylan and polyvinyl alcohol (PVA) with tetraethyl orthosilicate (TEOS) to get multifunctional composite hydrogels. These composite hydrogels were characterized by FTIR, SEM, water contact angle, and mechanical testing to determine structural, morphological, wetting, and mechanical behavior, respectively. Swelling and biodegradation were also conducted in different media. The enhanced antibacterial activities were observed against different bacterial strains (E. coli, S. aureus, and P. aeruginosa); anticancer activities and biocompatibility assays were found effective against U-87 and MC3T3-E1 cell lines due to the synergic effect of hydrogels. In vivo activities were conducted using a mouse full-thickness skin model, and accelerated wound healing was found without any major inflammation within 7 days with improved vascularization. From the results, these composite hydrogels might be potential wound dressing materials for biomedical applications.
Collapse
|
17
|
Ricci A, Cataldi A, Zara S, Gallorini M. Graphene-Oxide-Enriched Biomaterials: A Focus on Osteo and Chondroinductive Properties and Immunomodulation. Materials (Basel) 2022; 15:ma15062229. [PMID: 35329679 PMCID: PMC8955105 DOI: 10.3390/ma15062229] [Citation(s) in RCA: 5] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 12/27/2021] [Revised: 02/28/2022] [Accepted: 03/14/2022] [Indexed: 11/16/2022]
Abstract
Due to its exceptional physical properties, such as high electronic conductivity, good thermal stability, excellent mechanical strength, and chemical versatility, graphene has sparked a lot of interest in the scientific community for various applications. It has therefore been employed as an antibacterial agent, in photothermal therapy (PTT) and biosensors, in gene delivery systems, and in tissue engineering for regenerative purposes. Since it was first discovered in 1947, different graphene derivatives have been synthetized from pristine graphene. The most adaptable derivate is graphene oxide (GO). Owing to different functional groups, the amphiphilic structure of GO can interact with cells and exogenous or endogenous growth/differentiation factors, allowing cell adhesion, growth, and differentiation. When GO is used as a coating for scaffolds and nanomaterials, it has been found to enhance bone, chondrogenic, cardiac, neuronal, and skin regeneration. This review focuses on the applications of graphene-based materials, in particular GO, as a coating for scaffolds in bone and chondrogenic tissue engineering and summarizes the most recent findings. Moreover, novel developments on the immunomodulatory properties of GO are reported.
Collapse
|
18
|
Khan MUA, Razaq SIA, Mehboob H, Rehman S, Al-Arjan WS, Amin R. Antibacterial and Hemocompatible pH-Responsive Hydrogel for Skin Wound Healing Application: In Vitro Drug Release. Polymers (Basel) 2021; 13:3703. [PMID: 34771258 PMCID: PMC8588096 DOI: 10.3390/polym13213703] [Citation(s) in RCA: 31] [Impact Index Per Article: 10.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/06/2021] [Revised: 10/20/2021] [Accepted: 10/21/2021] [Indexed: 01/04/2023] Open
Abstract
The treatment of successive skin wounds necessitates meticulous medical procedures. In the care and treatment of skin wounds, hydrogels produced from natural polymers with controlled drug release play a crucial role. Arabinoxylan is a well-known and widely available biological macromolecule. We produced various formulations of blended composite hydrogels (BCHs) from arabinoxylan (ARX), carrageenan (CG), and reduced graphene oxide (rGO) using and cross-linked them with an optimal amount of tetraethyl orthosilicate (TEOS). The structural, morphological, and mechanical behavior of the BCHs samples were determined using Fourier-transform infrared spectroscopy (FT-IR), Scanning electron microscope (SEM), mechanical testing, and wetting, respectively. The swelling and degradation assays were performed in phosphate-buffered saline (PBS) solution and aqueous media. Maximum swelling was observed at pH 7 and the least swelling in basic pH regions. All composite hydrogels were found to be hemocompatible. In vitro, silver sulfadiazine release profile in PBS solution was analyzed via the Franz diffusion method, and maximum drug release (87.9%) was observed in 48 h. The drug release kinetics was studied against different mathematical models (zero-order, first-order, Higuchi, Hixson-Crowell, Korsmeyer-Peppas, and Baker-Lonsdale models) and compared their regression coefficient (R2) values. It was observed that drug release follows the Baker-Lonsdale model, as it has the highest value (0.989) of R2. Hence, the obtained results indicated that, due to optimized swelling, wetting, and degradation, the blended composite hydrogel BCH-3 could be an essential wound dressing biomaterial for sustained drug release for skin wound care and treatment.
Collapse
Affiliation(s)
- Muhammad Umar Aslam Khan
- BioInspired Device and Tissue Engineering Research Group, School of Biomedical Engineering and Health Sciences, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai 81300, Johor, Malaysia
- Institute of Personalized Medicine, School of Biomedical Engineering, Med-X Research Institute, Shanghai Jiao Tong University (SJTU),1954 Huashan Road, Shanghai 200030, China;
- Nanosciences and Technology Department (NS & TD), National Center for Physics, Quaid-i-Azam University Campus, Islamabad 44000, Pakistan
| | - Saiful Izwan Abd Razaq
- Institute of Personalized Medicine, School of Biomedical Engineering, Med-X Research Institute, Shanghai Jiao Tong University (SJTU),1954 Huashan Road, Shanghai 200030, China;
- Centre for Advanced Composite Materials Universiti Teknologi Malaysia Skudai, Johor Bahru 81310, Johor, Malaysia
| | - Hassan Mehboob
- Department of Engineering Management, College of Engineering, Prince Sultan University, Rafha Street, P.O. Box 66833, Riyadh 11586, Saudi Arabia;
| | - Sarish Rehman
- Chemistry Department, McGill University, 801 Sherbrooke St. W, Montreal, QC H3A0G4, Canada;
| | - Wafa Shamsan Al-Arjan
- Department of Chemistry, College of Science, King Faisal University, Al-Ahsa 31982, Saudi Arabia;
| | - Rashid Amin
- Department of Biology, College of Sciences, University of Hafr Al Batin, Hafar Al-Batin 39524, Saudi Arabia;
| |
Collapse
|
19
|
Khan MUA, Razak SIA, Ansari MNM, Zulkifli RM, Ahmad Zawawi N, Arshad M. Development of Biodegradable Bio-Based Composite for Bone Tissue Engineering: Synthesis, Characterization and In Vitro Biocompatible Evaluation. Polymers (Basel) 2021; 13:3611. [PMID: 34771168 PMCID: PMC8588120 DOI: 10.3390/polym13213611] [Citation(s) in RCA: 7] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/18/2021] [Revised: 10/12/2021] [Accepted: 10/15/2021] [Indexed: 12/13/2022] Open
Abstract
Several significant advancements in the field of bone regenerative medicine have been made in recent years. However, therapeutic options, such as bone grafts, have several drawbacks. There is a need to develop an adequate bone substitute. As a result, significant bone defects/injuries pose a severe challenge for orthopaedic and reconstructive bone tissue. We synthesized polymeric composite material from arabinoxylan (ARX), β-glucan (BG), nano-hydroxyapatite (nHAp), graphene oxide (GO), acrylic acid (AAc) through free radical polymerization and porous scaffold fabricated using the freeze-drying technique. These fabricated porous scaffolds were then coated with chitosan solution to enhance their biological activities. The complex structure of BG, nHAp, GO was studied through various characterization and biological assays. The structural, morphological, wetting and mechanical analyses were determined using FT-IR, XRD, XPS, SEM/EXD, water contact angle and UTM. The swelling (aqueous and PBS media) and degradation (PBS media) observed their behavior in contact with body fluid. The biological activities were conducted against mouse pre-osteoblast cell lines. The result found that BGH3 has desirable morphological, structural with optimum swelling, degradation, and mechanical behavior. It was also found to be cytocompatible against MC3T3-E1 cell lines. The obtained results confirmed that the fabricated polymeric scaffolds would be a potential bone substitute to regenerate defective bone with different loading bearing applications for bone tissue engineering.
Collapse
Affiliation(s)
- Muhammad Umar Aslam Khan
- BioInspired Device and Tissue Engineering Research Group, School of Biomedical Engineering and Health Sciences, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai 81300, Johor, Malaysia
- Department of Biosciences, Faculty of Science, Universiti Teknologi Malaysia, Skudai 81300, Johor, Malaysia; (R.M.Z.); (N.A.Z.)
- National Center for Physics, Nanosciences and Technology Department, Quaid-i-Azam University Islamabad Campus, Islamabad 44000, Pakistan;
| | - Saiful Izwan Abd Razak
- BioInspired Device and Tissue Engineering Research Group, School of Biomedical Engineering and Health Sciences, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai 81300, Johor, Malaysia
- Department of Biosciences, Faculty of Science, Universiti Teknologi Malaysia, Skudai 81300, Johor, Malaysia; (R.M.Z.); (N.A.Z.)
- Centre of Advanced Composite Materials, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai 81300, Johor, Malaysia
| | | | - Razauden Mohamed Zulkifli
- Department of Biosciences, Faculty of Science, Universiti Teknologi Malaysia, Skudai 81300, Johor, Malaysia; (R.M.Z.); (N.A.Z.)
| | - Nurliyana Ahmad Zawawi
- Department of Biosciences, Faculty of Science, Universiti Teknologi Malaysia, Skudai 81300, Johor, Malaysia; (R.M.Z.); (N.A.Z.)
| | - Muhammad Arshad
- National Center for Physics, Nanosciences and Technology Department, Quaid-i-Azam University Islamabad Campus, Islamabad 44000, Pakistan;
| |
Collapse
|
20
|
Khan MUA, Yaqoob Z, Ansari MNM, Razak SIA, Raza MA, Sajjad A, Haider S, Busra FM. Chitosan/Poly Vinyl Alcohol/Graphene Oxide Based pH-Responsive Composite Hydrogel Films: Drug Release, Anti-Microbial and Cell Viability Studies. Polymers (Basel) 2021; 13:3124. [PMID: 34578025 PMCID: PMC8471615 DOI: 10.3390/polym13183124] [Citation(s) in RCA: 17] [Impact Index Per Article: 5.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/27/2021] [Revised: 08/11/2021] [Accepted: 08/13/2021] [Indexed: 12/31/2022] Open
Abstract
The composite hydrogels were produced using the solution casting method due to the non-toxic and biocompatible nature of chitosan (CS)/polyvinyl alcohol (PVA). The best composition was chosen and crosslinked with tetraethyl orthosilicate (TEOS), after which different amounts of graphene oxide (GO) were added to develop composite hydrogels. Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), atomic force microscopy (AFM) and contact angle was used to analyze the hydrogels. The samples were also evaluated for swelling abilities in various mediums. The drug release profile was studied in phosphate-buffered saline (PBS) at a pH of 7.4. To predict the mechanism of drug release, the data were fitted into kinetic models. Finally, antibacterial activity and cell viability data were obtained. FTIR studies revealed the successful synthesis of CS/PVA hydrogels and GO/CS/PVA in hydrogel composite. SEM showed no phase separation of the polymers, whereas AFM showed a decrease in surface roughness with an increase in GO content. 100 µL of crosslinker was the critical concentration at which the sample displayed excellent swelling and preserved its structure. Both the crosslinked and composite hydrogel showed good swelling. The most acceptable mechanism of drug release is diffusion-controlled, and it obeys Fick's law of diffusion for drug released. The best fitting of the zero-order, Hixson-Crowell and Higuchi models supported our assumption. The GO/CS/PVA hydrogel composite showed better antibacterial and cell viability behaviors. They can be better biomaterials in biomedical applications.
Collapse
Affiliation(s)
- Muhammad Umar Aslam Khan
- BioInspired Device and Tissue Engineering Research Group, School of Biomedical Engineering and Health Sciences, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai 81300, Malaysia;
- Institute for Personalized Medicine, School of Biomedical Engineering, Med-X Research Institute, Shanghai Jiao Tong University, Shanghai 200030, China
- Nanoscience and Technology Department (NS & TD), National Center for Physics, Islamabad 44000, Pakistan
| | - Zahida Yaqoob
- Institute of Metallurgy and Materials Engineering, Faculty of Chemical and Materials Engineering, University of the Punjab, Lahore 54590, Pakistan; (Z.Y.); (M.A.R.)
| | | | - Saiful Izwan Abd Razak
- BioInspired Device and Tissue Engineering Research Group, School of Biomedical Engineering and Health Sciences, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai 81300, Malaysia;
- Centre for Advanced Composite Materials, Universiti Teknologi Malaysia, Skudai 81300, Malaysia
| | - Mohsin Ali Raza
- Institute of Metallurgy and Materials Engineering, Faculty of Chemical and Materials Engineering, University of the Punjab, Lahore 54590, Pakistan; (Z.Y.); (M.A.R.)
| | - Amna Sajjad
- Department of Zoology, Government College University Faisalabad, Faisalabad 38000, Pakistan;
| | - Sajjad Haider
- Department of Chemical Engineering, College of Engineering, King Saud University, P.O. Box 800, Riyadh 11421, Saudi Arabia;
| | - Fauzi Mh Busra
- Tissue Engineering Centre, UKM Medical Centre, Jalan Yaacob Latiff, Bandar Tun Razak, Cheras, Kuala Lumpur 56000, Malaysia;
| |
Collapse
|
21
|
Aslam Khan MU, Al-Arjan WS, Binkadem MS, Mehboob H, Haider A, Raza MA, Abd Razak SI, Hasan A, Amin R. Development of Biopolymeric Hybrid Scaffold-Based on AAc/GO/nHAp/TiO 2 Nanocomposite for Bone Tissue Engineering: In-Vitro Analysis. Nanomaterials (Basel) 2021; 11:1319. [PMID: 34067844 PMCID: PMC8156135 DOI: 10.3390/nano11051319] [Citation(s) in RCA: 24] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/09/2021] [Revised: 05/04/2021] [Accepted: 05/09/2021] [Indexed: 12/17/2022]
Abstract
Bone tissue engineering is an advanced field for treatment of fractured bones to restore/regulate biological functions. Biopolymeric/bioceramic-based hybrid nanocomposite scaffolds are potential biomaterials for bone tissue because of biodegradable and biocompatible characteristics. We report synthesis of nanocomposite based on acrylic acid (AAc)/guar gum (GG), nano-hydroxyapatite (HAp NPs), titanium nanoparticles (TiO2 NPs), and optimum graphene oxide (GO) amount via free radical polymerization method. Porous scaffolds were fabricated through freeze-drying technique and coated with silver sulphadiazine. Different techniques were used to investigate functional group, crystal structural properties, morphology/elemental properties, porosity, and mechanical properties of fabricated scaffolds. Results show that increasing amount of TiO2 in combination with optimized GO has improved physicochemical and microstructural properties, mechanical properties (compressive strength (2.96 to 13.31 MPa) and Young's modulus (39.56 to 300.81 MPa)), and porous properties (pore size (256.11 to 107.42 μm) and porosity (79.97 to 44.32%)). After 150 min, silver sulfadiazine release was found to be ~94.1%. In vitro assay of scaffolds also exhibited promising results against mouse pre-osteoblast (MC3T3-E1) cell lines. Hence, these fabricated scaffolds would be potential biomaterials for bone tissue engineering in biomedical engineering.
Collapse
Affiliation(s)
- Muhammad Umar Aslam Khan
- BioInspired Device and Tissue Engineering Research Group, School of Biomedical Engineering and Health Sciences, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai 81300, Johor, Malaysia;
- Department of Polymer Engineering and Technology, University of the Punjab, Quaid-e-Azam Campus, Lahore 54590, Pakistan
- Institute for Personalized Medicine, School of Biomedical Engineering, Shanghai Jiao Tong University, Shanghai 200030, China
- Department of Metallurgy and Materials Engineering, CEET, University of the Punjab, Quaid-e-Azam Campus, Lahore 54590, Pakistan;
| | - Wafa Shamsan Al-Arjan
- Department of Chemistry, College of Science, King Faisal University, Al-Ahsa 31982, Saudi Arabia;
| | - Mona Saad Binkadem
- Department of Chemistry, Faculty of Science, University of Jeddah, Jeddah 21589, Saudi Arabia;
| | - Hassan Mehboob
- Department of Engineering Management, College of Engineering, Prince Sultan University, Rafha Street, Riyadh 11586, Saudi Arabia;
| | - Adnan Haider
- Department of Biological Sciences, National University of Medical Sciences, Rawalpindi, Punjab 46000, Pakistan;
| | - Mohsin Ali Raza
- Department of Metallurgy and Materials Engineering, CEET, University of the Punjab, Quaid-e-Azam Campus, Lahore 54590, Pakistan;
| | - Saiful Izwan Abd Razak
- BioInspired Device and Tissue Engineering Research Group, School of Biomedical Engineering and Health Sciences, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai 81300, Johor, Malaysia;
- Center for Advanced Composite Materials, Universiti Teknologi Malaysia, Skudai 81300, Johor, Malaysia
| | - Anwarul Hasan
- Biomedical Research Center, Qatar University, Doha 2713, Qatar;
- Department of Mechanical and Industrial Engineering, Qatar University, Doha 2713, Qatar
| | - Rashid Amin
- Department of Biology, College of Sciences, University of Hafr Al Batin, Hafr Al Batin 39524, Saudi Arabia;
| |
Collapse
|
22
|
Hassan R, Aslam Khan MU, Abdullah AM, Abd Razak SI. A Review on Current Trends of Polymers in Orthodontics: BPA-Free and Smart Materials. Polymers (Basel) 2021; 13:1409. [PMID: 33925332 PMCID: PMC8123702 DOI: 10.3390/polym13091409] [Citation(s) in RCA: 12] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/30/2021] [Revised: 04/15/2021] [Accepted: 04/16/2021] [Indexed: 12/12/2022] Open
Abstract
Polymeric materials have always established an edge over other classes of materials due to their potential applications in various fields of biomedical engineering. Orthodontics is an emerging field in which polymers have attracted the enormous attention of researchers. In particular, thermoplastic materials have a great future utility in orthodontics, both as aligners and as retainer appliances. In recent years, the use of polycarbonate brackets and base monomers bisphenol A glycerolate dimethacrylate (bis-GMA) has been associated with the potential release of bisphenol A (BPA) in the oral environment. BPA is a toxic compound that acts as an endocrine disruptor that can affect human health. Therefore, there is a continuous search for non-BPA materials with satisfactory mechanical properties and an esthetic appearance as an alternative to polycarbonate brackets and conventional bis-GMA compounds. This study aims to review the recent developments of BPA-free monomers in the application of resin dental composites and adhesives. The most promising polymeric smart materials are also discussed for their relevance to future orthodontic applications.
Collapse
Affiliation(s)
- Rozita Hassan
- Orthodontic Unit, School of Dental Sciences, Universiti Sains Malaysia, Kelantan 16150, Malaysia;
| | - Muhammad Umar Aslam Khan
- BioInspired Device and Tissue Engineering Research Group, School of Biomedical Engineering and Health Sciences, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai 81300, Malaysia;
- Nanoscience and Technology Department (NS & TD), National Center for Physics, Islamabad 44000, Pakistan
- Med-X Research Institute, School of Biomedical Engineering, Shanghai Jiao Tong University, 1954 Huashan Road, Shanghai 200030, China
| | - Abdul Manaf Abdullah
- Orthodontic Unit, School of Dental Sciences, Universiti Sains Malaysia, Kelantan 16150, Malaysia;
| | - Saiful Izwan Abd Razak
- BioInspired Device and Tissue Engineering Research Group, School of Biomedical Engineering and Health Sciences, Faculty of Engineering, Universiti Teknologi Malaysia, Skudai 81300, Malaysia;
- Center for Advanced Composite Materials, Universiti Teknologi Malaysia, Skudai 81300, Malaysia
| |
Collapse
|