Influence of magnetite incorporation into chitosan on the adsorption of the methotrexate and in vitro cytotoxicity

Magnetite nanoparticles: an emerging adjunctive tool for the improvement of cancer immunotherapy

Cancer immunotherapy has emerged as a groundbreaking field, offering promising and transformative tools for oncological research and treatment. However, it faces several limitations, including variations in cancer types, dependence on the tumor microenvironments (TMEs), immune cell exhaustion, and adverse reactions. Magnetic nanoparticles, particularly magnetite nanoparticles (MNPs), with established pharmacodynamics and pharmacokinetics for clinical use, hold great promise in this context and are now being explored for therapeutic aims. Numerous preclinical studies have illustrated their efficacy in enhancing immunotherapy through various strategies, such as modulating leukocyte functions, creating favorable TMEs for cytotoxic T lymphocytes, combining with monoclonal antibodies, and stimulating the immune response via magnetic hyperthermia (MHT) treatment (Front Immunol. 2021;12:701485. doi: 10.3389/fimmu.2021.701485). However, the current clinical trials of MNPs are mostly for diagnostic aims and as a tool for generating hyperthermia for tumor ablation. With concerns about the adverse effects of MNPs in the in vivo systems, clinical translation and clinical study of MNP-boosted immunotherapy remains limited. The lack of extensive clinical investigations poses a current barrier to patient application. Urgent efforts are needed to ascertain both the efficacy of MNP-enhanced immunotherapy and its safety profile in combination therapy. This article reviews the roles, potential, and challenges of using MNPs in advancing cancer immunotherapy. The application of MNPs in boosting immunotherapy, and its perspective role in research and development is also discussed.

Synthesis and characterization of MoS2-COOH/gly/Mn nanocomposite as an efficient adsorbent for Ultra-trace determination of trifluralin herbicide

The world is confronting a severe water crisis. To clean up water from heavy metals, microorganisms, chemicals, and other types of pollutants, nanocomposites have been receiving great attention specifically due to the high surface area affording to work effectually even at low concentrations. In this research, we synthesized a new amino acid-modified MoS2 nanocomposite by chemically immobilizing Mn (II). The synthesized absorbent MoS2-COOH/gly/Mn was identified by thermogravimetric analysis (TGA), nitrogen adsorption measurement, X-ray diffraction (XRD), analysis of energy dispersive X-ray mapping (EDAX and MAP), field emission scanning electron microscopy (FE-SEM), and Fourier Transform Infrared spectrometry (FT-IR). The nanocomposite was employed as an adsorbent through the solid phase microextraction (SPME) method while trifluralin herbicide was chosen as a model compound. For the monitoring of trifluralin molecules, we employed an ion mobility spectrometry apparatus featuring a corona discharge ionization source. The SPME method's effectiveness was examined by investigating the stirring rate and extraction time as two crucial parameters, aiming to achieve trace analysis of trifluralin. Under the optimized condition of the trifluralin extraction, the coefficient (R2) and linear dynamic range (LDR) correlation were obtained at 0.9961 and 0.5-10 μg L-1, respectively. Relative recovery values the described approach were obtained in the span of 96-97% for agricultural wastewater samples. The quantification (LOQ) and limit of detection (LOD) were calculated at 0.5 and 0.15 μg L-1, respectively. The proposed nanocomposite absorbent has the capability to be applied as an efficient material for the extraction of trifluralin herbicide from different solutions.

Phytochemical characterization and toxicological activity attributed to the acetonic extract of South American Vassobia breviflora

The particular plant species found in southern Brazil, Vassobia breviflora (Solanaceae) has only a few apparent studies examining its biological effect. Thus, the aim of the present study was to determine the activity of the acetone extract fraction derived from V. breviflora. Four compounds were identified by ESI-qTOF-MS: eucalrobusone R, aplanoic acid B, pheophorbide A, and pheophytin A. In addition, 5 compounds were identified by HPLC-PDA-MS/MS: all-trans-lutein, 15-cis-lutein, all-trans-β-carotene, 5,8-epoxy-β-carotene, and cis-β-carotene. Cell lines A549 (lung cancer), A375 (melanoma cancer) and HeLa (cervical cancer) were incubated with different concentrations of each studied extract using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT), lactate dehydrogenase (LDH), and 2'-7'dichlorofluorescin diacetate (DCFH-DA) assays. The acetonic extract exhibited cytotoxic activity at a concentration of 0.03 mg/ml in the HeLa strain and 0.1 mg/ml in the others. In addition to increased production of reactive oxygen species (ROS). Antibacterial activity was assessed utilizing minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) in 9 ATCCs strains and 7 clinical isolates, as well as determination of biofilm production. Data demonstrated that MIC and MBC were approximately 256 mg/ml in most of the strains tested and antibiofilm effect at S. aureus, S. epidermidis, A. baumannii, and E. faecalis, concentrations below the MIC. Genotoxic activity on plasmid DNA did not produce significant elevated levels in breaks in the isolated genetic material.

Construction of hexagonal spindle-shaped Fe-MOFs induced by cationic copolymer and its application for effective wastewater treatment

The environment and human health are in danger due to the long-term enrichment and buildup of organic pesticides, dyes, and harmful microbes in wastewater. The development of functional materials that are efficient for treating wastewater remains a significant problem. Eco-friendly hexagonal spindle-shaped Fe-MOFs (Hs-FeMOFs) were created in this study under the influence of cationic copolymer (PMSt). The mechanism of crystal growth and development of its unique morphology were described after looking into impact factors for the ideal circumstances and being characterized by XRD, TEM, XPS, and other techniques. It revealed that Hs-FeMOFs possess an enormous supply of adsorption active sites, a strong electropositivity, and the nanometer tip. Then, typical organic pollutants, such as herbicides and mixed dyes, as well as biological pollutants bacteria, were chosen to assess its efficacy in wastewater treatment. It was discovered that the pendimethalin could be quickly removed in wastewater and the removal rate reached 100% within 10 min. In separation of mixed dyes, the retention rate of malachite green (MG) reached 92.3% in 5 min and with a minimum inhibitory concentration of 0.8 mg/mL and demonstrated strong activity due to the presence of cationic copolymers. In actual water matrix, Hs-FeMOF could also play excellent adsorption and antibacterial activity. In summary, a novel, environmentally friendly MOF material with good activity was successfully created by cationic copolymer induction. It offers a fresh approach to develop functional materials in wastewater treatment.

Cassava bagasse as an alternative biosorbent to uptake methylene blue environmental pollutant from water

Herein, the methylene blue (MB) biosorption from the agroindustrial residue (cassava bagasse) is reported. The cassava bagasse residue presented an irregular surface, anionic character, and low specific surface area. The experiments were performed in batch mode. The biosorption behavior was investigated through the experimental variables, initial concentration of MB, pH, and temperature. The maximum biosorption capacity (170.13 mg g^-1) reached 328 K and pH 10.0. The equilibrium and kinetics were better fitted by the Sips and general order (R² ≥ 0.997 and R²_adj ≥ 0.996) models, respectively. Furthermore, the thermodynamic study revealed a spontaneous (ΔG⁰ < 0) and endothermic process. Finally, the results showed cassava bagasse is a potential material for biosorption dyes from the aqueous medium. In addition, the biosorbent has a low aggregate cost and high availability, which contributes to the destination of large amounts of waste and inspires engineering applications.

Metal Oxides Nanoparticles: General Structural Description, Chemical, Physical, and Biological Synthesis Methods, Role in Pesticides and Heavy Metal Removal through Wastewater Treatment

Nanotechnology (NT) is now firmly established in both the private home and commercial markets. Due to its unique properties, NT has been fully applied within multiple sectors like pharmacy and medicine, as well as industries like chemical, electrical, food manufacturing, and military, besides other economic sectors. With the growing demand for environmental resources from an ever-growing world population, NT application is a very advanced new area in the environmental sector and offers several advantages. A novel template synthesis approach is being used for the promising metal oxide nanostructures preparation. Synthesis of template-assisted nanomaterials promotes a greener and more promising protocol compared to traditional synthesis methods such as sol-gel and hydrothermal synthesis, and endows products with desirable properties and applications. It provides a comprehensive general view of current developments in the areas of drinking water treatment, wastewater treatment, agriculture, and remediation. In the field of wastewater treatment, we focus on the adsorption of heavy metals and persistent substances and the improved photocatalytic decomposition of the most common wastewater pollutants. The drinking water treatment section covers enhanced pathogen disinfection and heavy metal removal, point-of-use treatment, and organic removal applications, including the latest advances in pesticide removal.

Efficient Uptake of Angiotensin-Converting Enzyme II Inhibitor Employing Graphene Oxide-Based Magnetic Nanoadsorbents

This paper reports a high efficiency uptake of captopril (CPT), employing magnetic graphene oxide (MGO) as the adsorbent. The graphene oxide (GO) was produced through an oxidation and exfoliation method, and the magnetization technique by the co-precipitation method. The nanomaterials were characterized by FTIR, XRD, SEM, Raman, and VSM analysis. The optimal condition was reached by employing GO·Fe3O4 at pH 3.0 (50 mg of adsorbent and 50 mg L−1 of CPT), presenting values of removal percentage and maximum adsorption capacity of 99.43% and 100.41 mg g−1, respectively. The CPT adsorption was dependent on adsorbent dosage, initial concentration of adsorbate, pH, and ionic strength. Sips and Elovich models showed the best adjustment for experimental data, suggesting that adsorption occurs in a heterogeneous surface. Thermodynamic parameters reveal a favorable, exothermic, involving a chemisorption process. The magnetic carbon nanomaterial exhibited a high efficiency after five adsorption/desorption cycles. Finally, the GO·Fe3O4 showed an excellent performance in CPT removal, allowing future application in waste management.

Study of phenobarbital removal from the aqueous solutions employing magnetite-functionalized chitosan

Due to its wide use in anticonvulsant pharmacotherapy, phenobarbital (PHEN) is an aquatic contaminant with a high prevalence in the environment. In this adsorption study, chitosan and chitosan-based magnetic adsorbents containing different amounts of incorporated magnetite (CS, CS·Fe₃O₄ 1:1, CS·Fe₃O₄ 1:5, and CS·Fe₃O₄ 1:10) were used for phenobarbital removal. The magnetic adsorbents were synthesized by co-precipitation method and characterized through FTIR, XRD, MEV, and VSM analysis. In PHEN adsorption, the equilibrium and adsorption kinetic were better adjusted by the Sips and pseudo-second-order model, respectively. Among the four nanoadsorbents used, the maximum phenobarbital adsorption capacity was 94.60 mg g^-1 using 25 mg of CS·Fe₃O₄ 1:5, with a concentration of PHEN (50 mg L^-1), pH 7.0 at room temperature. The parameters of pH, adsorbent dosage, ionic strength, and thermodynamic study were tested for the adsorbent with the highest performance (CS·Fe₃O₄ 1:5). The nanoadsorbent demonstrates efficiency in the removal of the contaminant for diverse adsorption cycles. Finally, the protocol employing magnetic adsorbents dispenses the subsequent steps of filtration and centrifugation.

Highly Efficient Adsorption of Tetracycline Using Chitosan-Based Magnetic Adsorbent

Herein, tetracycline adsorption employing magnetic chitosan (CS·Fe₃O₄) as the adsorbent is reported. The magnetic adsorbent was synthesized by the co-precipitation method and characterized through FTIR, XRD, SEM, and VSM analyses. The experimental data showed that the highest maximum adsorption capacity was reached at pH 7.0 (211.21 mg g^-1). The efficiency of the magnetic adsorbent in tetracycline removal was dependent on the pH, initial concentration of adsorbate, and the adsorbent dosage. Additionally, the ionic strength showed a significant effect on the process. The equilibrium and kinetics studies demonstrate that Sips and Elovich models showed the best adjustment for experimental data, suggesting that the adsorption occurs in a heterogeneous surface and predominantly by chemical mechanisms. The experimental results suggest that tetracycline adsorption is mainly governed by the hydrogen bonds and cation-π interactions due to its pH dependence as well as the enhancement in the removal efficiency with the magnetite incorporation on the chitosan surface, respectively. Thermodynamic parameters indicate a spontaneous and exothermic process. Finally, magnetic chitosan proves to be efficient in TC removal even after several adsorption/desorption cycles.

Synthesis of CoFe2O4 magnetic nanoparticles for application in photocatalytic removal of azithromycin from wastewater

Azithromycin is one of the most widely used antibiotics in medicine prescribed for various infectious diseases such as COVID-19. A significant amount of this drug is always disposed of in hospital effluents. In this study, the removal of azithromycin using Cobalt-Ferrite magnetic nanoparticles (MNP) is investigated in the presence of UV light. For this purpose, magnetic nanoparticles are synthesized and added to the test samples as a catalyst in specific proportions. To determine the structural and morphological properties of nanoparticles, characterization tests including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), vibrating-sample magnetometer (VSM), and Energy-dispersive X-ray spectroscopy (EDX) are performed. 27 runs have been implemented based on the design of experiments using the Box-Behnken Design (BBD) method. Parameters are the initial concentration of azithromycin (20-60 mg/L), contact time (30-90 min), pH (6-10), and the dose of magnetic nanoparticles (20-60 mg/L). The obtained model interprets test results with high accuracy (R² = 0.9531). Also, optimization results by the software show that the contact time of 90 min, MNP dosage of 60 mg/L, pH value of 6.67, and azithromycin initial concentration of 20 mg/L leads to the highest removal efficiency of 89.71%. These numbers are in the range of other studies in this regard.

Biological Applications of Silica-Based Nanoparticles

Silica nanoparticles have been widely explored in biomedical applications, mainly related to drug delivery and cancer treatment. These nanoparticles have excellent properties, high biocompatibility, chemical and thermal stability, and ease of functionalization. Moreover, silica is used to coat magnetic nanoparticles protecting against acid leaching and aggregation as well as increasing cytocompatibility. This review reports the recent advances of silica-based magnetic nanoparticles focusing on drug delivery, drug target systems, and their use in magnetohyperthermia and magnetic resonance imaging. Notwithstanding, the application in other biomedical fields is also reported and discussed. Finally, this work provides an overview of the challenges and perspectives related to the use of silica-based magnetic nanoparticles in the biomedical field.

Adsorption and Photocatalytic Degradation of Pesticides into Nanocomposites: A Review

The extensive use of pesticides in agriculture has significantly impacted the environment and human health, as these pollutants are inadequately disposed of into water bodies. In addition, pesticides can cause adverse effects on humans and aquatic animals due to their incomplete removal from the aqueous medium by conventional wastewater treatments. Therefore, processes such as heterogeneous photocatalysis and adsorption by nanocomposites have received special attention in the scientific community due to their unique properties and ability to degrade and remove several organic pollutants, including pesticides. This report reviews the use of nanocomposites in pesticide adsorption and photocatalytic degradation from aqueous solutions. A bibliographic search was performed using the ScienceDirect, American Chemical Society (ACS), and Royal Society of Chemistry (RSC) indexes, using Boolean logic and the following descriptors: "pesticide degradation" AND "photocatalysis" AND "nanocomposites"; "nanocomposites" AND "pesticides" AND "adsorption". The search was limited to research article documents in the last ten years (from January 2012 to June 2022). The results made it possible to verify that the most dangerous pesticides are not the most commonly degraded/removed from wastewater. At the same time, the potential of the supported nanocatalysts and nanoadsorbents in the decontamination of wastewater-containing pesticides is confirmed once they present reduced bandgap energy, which occurs over a wide range of wavelengths. Moreover, due to the great affinity of the supported nanocatalysts with pesticides, better charge separation, high removal, and degradation values are reported for these organic compounds. Thus, the class of the nanocomposites investigated in this work, magnetic or not, can be characterized as suitable nanomaterials with potential and unique properties useful in heterogeneous photocatalysts and the adsorption of pesticides.

Arsenic in drinking water: overview of removal strategies and role of chitosan biosorbent for its remediation

Accessibility to clean drinking water often remains a crucial task at times. Among other water pollutants, arsenic is considered a more lethal contaminant and has become a serious threat to human life globally. This review discussed the sources, chemistry, distribution, and toxicity of arsenic and various conventional technologies that are in option for its removal from the water system. Nowadays, biosorbents are considered the best option for arsenic-contaminated water treatment. We have mainly focused on the need and potential of biosorbents especially the role of chitosan-based composites for arsenic removal. The chitosan-based sorbents are economically more efficient in terms of their, low toxicity, cost-effectiveness, biodegradability, eco-friendly nature, and reusability. The role of various modification techniques, such as physical and chemical, has also been evaluated to improve the physicochemical properties of biosorbent. The importance of adsorption kinetic and isotherm models and the role of solution pH and pH_PZC for arsenic uptake from the polluted water have also been investigated. Some other potential applications of chitosan-based biosorbents have also been discussed along with its sustainability aspect. Finally, some suggestions have been highlighted for further improvements in this field.