Magnetic graphene derivates for efficient herbicide removal from aqueous solution through adsorption

2,4-Dichlorophenoxyacetic acid (2,4-D) is an herbicide and is among the most widely distributed pollutant in the environment and wastewater. Herein is presented a complete comparison of adsorption performance between two different magnetic carbon nanomaterials: graphene oxide (GO) and its reduced form (rGO). Magnetic functionalization was performed employing a coprecipitation method, using only one source of Fe2+, requiring low energy, and potentially allowing the control of the amount of incorporated magnetite. For the first time in literature, a green reduction approach for GO with and without Fe3O4, maintaining the magnetic behavior after the reaction, and an adsorption performance comparison between both carbon nanomaterials are demonstrated. The nanoadsorbents were characterized by FTIR, XRD, Raman, VSM, XPS, and SEM analyses, which demonstrates the successful synthesis of graphene derivate, with different amounts of incorporate magnetite, resulting in distinct magnetization values. The reduction was confirmed by XPS and FTIR techniques. The type of adsorbent reveals that the amount of magnetite on nanomaterial surfaces has significant influence on adsorption capacity and removal efficiency. The procedure demonstrated that the best performance, for magnetic nanocomposites, was obtained by GO∙Fe3O4 1:1 and rGO∙Fe3O4 1:1, presenting values of removal percentage of 70.49 and 91.19%, respectively. The highest adsorption capacity was reached at pH 2.0 for GO∙Fe3O4 1:1 (69.98 mg g-1) and rGO∙Fe3O4 1:1 (89.27 mg g-1), through different interactions: π-π, cation-π, and hydrogen bonds. The adsorption phenomenon exhibited a high dependence on pH, initial concentration of adsorbate, and coexisting ions. Sips and PSO models demonstrate the best adjustment for experimental data, suggesting a heterogeneous surface and different energy sites, respectively. The thermodynamic parameters showed that the process was spontaneous and exothermic. Finally, the nanoadsorbents demonstrated a high efficiency in 2,4-D adsorption even after five adsorption/desorption cycles.

Efficient Uptake of Angiotensin-Converting Enzyme II Inhibitor Employing Graphene Oxide-Based Magnetic Nanoadsorbents

This paper reports a high efficiency uptake of captopril (CPT), employing magnetic graphene oxide (MGO) as the adsorbent. The graphene oxide (GO) was produced through an oxidation and exfoliation method, and the magnetization technique by the co-precipitation method. The nanomaterials were characterized by FTIR, XRD, SEM, Raman, and VSM analysis. The optimal condition was reached by employing GO·Fe3O4 at pH 3.0 (50 mg of adsorbent and 50 mg L−1 of CPT), presenting values of removal percentage and maximum adsorption capacity of 99.43% and 100.41 mg g−1, respectively. The CPT adsorption was dependent on adsorbent dosage, initial concentration of adsorbate, pH, and ionic strength. Sips and Elovich models showed the best adjustment for experimental data, suggesting that adsorption occurs in a heterogeneous surface. Thermodynamic parameters reveal a favorable, exothermic, involving a chemisorption process. The magnetic carbon nanomaterial exhibited a high efficiency after five adsorption/desorption cycles. Finally, the GO·Fe3O4 showed an excellent performance in CPT removal, allowing future application in waste management.

Study of phenobarbital removal from the aqueous solutions employing magnetite-functionalized chitosan

Due to its wide use in anticonvulsant pharmacotherapy, phenobarbital (PHEN) is an aquatic contaminant with a high prevalence in the environment. In this adsorption study, chitosan and chitosan-based magnetic adsorbents containing different amounts of incorporated magnetite (CS, CS·Fe₃O₄ 1:1, CS·Fe₃O₄ 1:5, and CS·Fe₃O₄ 1:10) were used for phenobarbital removal. The magnetic adsorbents were synthesized by co-precipitation method and characterized through FTIR, XRD, MEV, and VSM analysis. In PHEN adsorption, the equilibrium and adsorption kinetic were better adjusted by the Sips and pseudo-second-order model, respectively. Among the four nanoadsorbents used, the maximum phenobarbital adsorption capacity was 94.60 mg g^-1 using 25 mg of CS·Fe₃O₄ 1:5, with a concentration of PHEN (50 mg L^-1), pH 7.0 at room temperature. The parameters of pH, adsorbent dosage, ionic strength, and thermodynamic study were tested for the adsorbent with the highest performance (CS·Fe₃O₄ 1:5). The nanoadsorbent demonstrates efficiency in the removal of the contaminant for diverse adsorption cycles. Finally, the protocol employing magnetic adsorbents dispenses the subsequent steps of filtration and centrifugation.

Biological Applications of Silica-Based Nanoparticles

Silica nanoparticles have been widely explored in biomedical applications, mainly related to drug delivery and cancer treatment. These nanoparticles have excellent properties, high biocompatibility, chemical and thermal stability, and ease of functionalization. Moreover, silica is used to coat magnetic nanoparticles protecting against acid leaching and aggregation as well as increasing cytocompatibility. This review reports the recent advances of silica-based magnetic nanoparticles focusing on drug delivery, drug target systems, and their use in magnetohyperthermia and magnetic resonance imaging. Notwithstanding, the application in other biomedical fields is also reported and discussed. Finally, this work provides an overview of the challenges and perspectives related to the use of silica-based magnetic nanoparticles in the biomedical field.

Influence of magnetite incorporation into chitosan on the adsorption of the methotrexate and in vitro cytotoxicity

Emerging pollutants are a group of substances involved in environmental contamination resulting mostly from incomplete drug metabolism, associated with inadequate disposal and ineffective effluent treatment techniques. Methotrexate (MTX), for instance, is excreted at high concentrations in unchanged form through the urine. Although the MTX is still effective in cancer and autoimmune disease treatment, this drug shows the ability of bioaccumulation and toxicity to the organism. Thus, the present work aimed to evaluate the adsorption of the MTX drug onto magnetic nanocomposites containing different amounts of incorporated magnetite (1:1, 1:5, and 1:10 wt%), combining the theoretical-experimental study as well as the in vitro cytotoxicity. Moreover, equilibrium studies (Langmuir, Freundlich, Temkin, Dubinin-Radushkevich, Hill, Redlich-Peterson, and Sips), kinetic (PFO, PSO, and IPD), and thermodynamic (ΔG°, ΔH°, and ΔS°) were used to describe the experimental data, and ab initio simulations were employed in the theoretical study. Magnetic nanocomposites were synthesized by the co-precipitation method using only FeCl₂ as the iron precursor. Adsorbents were characterized by FTIR, XRD, Raman, SEM-EDS, BET, and VSM analysis. Meanwhile, cytotoxic effects on L929 and A375 cell lines were evaluated through MTT, NR, and LDH assays. The adsorption of the MTX was carried out in a typical batch system, exploring the different experimental conditions. The theoretical study suggests the occurrence of chemisorption between CS·Fe₃O₄-MTX. The maximum adsorption capacity of MTX was 285.92 mg g^-1, using 0.125 g L^-1 of CS·Fe₃O₄ 1:1, with an initial concentration of the MTX (50 mg L^-1), pH 4.0 at 293 ± 1.00 K. The best adjustment of equilibrium and kinetic data were the Sips (low values for statistical errors) and PSO (q_e = 96.73 mg g^-1) models, respectively. Thermodynamic study shows that the adsorption occurred spontaneously (ΔG° < 0), with exothermic (ΔH° =  - 4698.89 kJ mol^-1) and random at the solid-solution interface (ΔS° = 1,476,022.00 kJ mol^-1 k^-1) behavior. Finally, the in vitro study shows that magnetic nanomaterials exhibit higher cytotoxicity in melanoma cells. Therefore, the magnetic nanocomposite reveals to be not only an excellent tool for water remediation studies but also a promising platform for drug delivery.

Methylphenidate adsorption onto graphene derivatives: theory and experiment

In this manuscript, we report a study on the removal of contaminant methylphenidate from aqueous solution, including ab initio simulations and experimental adsorption, applying graphene oxide and reduced graphene oxide as adsorbents.

Synthesis, Characterization, and Biological Activity Evaluation of Magnetite-Functionalized Eugenol.. [DOI: 10.21203/rs.3.rs-1025029/v1] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

In this work, we report, for the first time, the magnetite-functionalization and biological evaluation of eugenol by the co-precipitation method employed only Fe2+ under mild conditions and control from the amount of the incorporated magnetite. Magnetic nanoparticles were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR), and hydrodynamic size distribution (Zetasizer). SEM images showed that EUG·Fe3O4 is 200 nm in size and similar in shape to a nanoflower. The FTIR spectrum confirmed the presence of characteristic EUG and Fe3O4 bands in the EUG·Fe3O4 sample, while the XRD analysis showed that the magnetite functionalization with eugenol slightly affected the Fe3O4 crystal structure. The in vitro safety profile and cytotoxicity of free eugenol, magnetite pristine, EUG·Fe3O4 1:1, EUG·Fe3O4 1:5, and EUG·Fe3O4 1:10 was investigated using human cell lines (keratinocytes and melanoma). The results demonstrate the high biocompatibility of EUG·Fe3O4 in HaCat cells and the greater specificity for the A375 cell line. Furthermore, the magnetite-functionalized with eugenol decreased the toxic effects of free eugenol on healthy cells. Antibacterial tests were performed in different bacterial strains. The experimental data showed that among the magnetic compounds, the microorganisms were only sensitive to treatment with EUG·Fe3O4 1:1. Regarding the antibiofilm activity assay, it can be observed that only the EUG·Fe3O4 caused a significant decrease in biomass when compared to the positive control. Finally, it can be concluded that EUG·Fe3O4 proves to be a potential candidate for future studies for drug delivery of cancer and bacterial infections treatments.