Smartphone-assisted ratiometric fluorescence sensing platform and logical device based on polydopamine nanoparticles and carbonized polymer dots for visual and point-of-care testing of glutathione

Nitrodopamine modified MnO2 NS-MoS2QDs hybrid nanocomposite for the extracellular and intracellular detection of glutathione

We have developed a highly sensitive and reliable fluorescence resonance energy transfer (FRET) probe using nitro-dopamine (ND) and dopamine (DA) coated MnO2 nanosheet (ND@MnO2 NS and DA@MnO2 NS) as an energy acceptor and MoS2 quantum dots (QDs) as an energy donor. By employing surface-modified MnO2 NS, we can effectively reduce the fluorescence intensity of MoS2 QDs through FRET. It can reduce MnO2 NS to Mn2+ and facilitate the fluorescence recovery of the MoS2 QDs. This ND@MnO2 NS@MoS2 QD-based nanoprobe demonstrates excellent sensitivity to GSH, achieving an LOD of 22.7 nM in an aqueous medium while exhibiting minimal cytotoxicity and good biocompatibility. Moreover, our sensing platform shows high selectivity to GSH towards various common biomolecules and electrolytes. Confocal fluorescence imaging revealed that the nanoprobe can image GSH in A549 cells. Interestingly, the ND@MnO2 NS nanoprobe demonstrates no cytotoxicity in living cancer cells, even at concentrations up to 100 μg mL-1. Moreover, the easy fabrication and eco-friendliness of ND@MnO2 NS make it a rapid and simple method for detecting GSH. We envision the developed nanoprobe as an incredible platform for real-time monitoring of GSH levels in both extracellular and intracellular mediums, proving valuable for biomedical research and clinical diagnostics.

Effective disproportionation of SiO induced by Na2CO3 and improved cycling stability via PDA-based carbon coating as anode materials for Li-ion batteries

In order to improve the initial coulombic efficiency (ICE) and cycle performance of SiO, in this study, the disproportionation reaction of commercial SiO is performed with the assistance of Na2CO3 under high temperatures. A polydopamine-based carbon is then in situ formed on the surface of the mixture (d-SiO-G) of disproportionated-SiO and graphite. It is found that an appropriate amount of Na2CO3 can effectively enhance the ICE of the commercial SiO due to the formation of Si, SiO2, and silicate; the mass ratio of d-SiO-G to the dopamine monomer is the important factor in influencing the cycling stability of the d-SiO-G@C composite. Due to the synergistic effect of graphite and the polydopamine-based carbon layer, the ICE for the d-SiO-G@C composite is 72.6%, and its capacity retention reaches 86.2% after 300 cycles, which is 11% higher than that of d-SiO-G. The modification method is an effective strategy for SiO materials in commercial applications.

Zero-Dimensional Carbon Nanomaterials for Fluorescent Sensing and Imaging

Advances in nanotechnology and nanomaterials have attracted considerable interest and play key roles in scientific innovations in diverse fields. In particular, increased attention has been focused on carbon-based nanomaterials exhibiting diverse extended structures and unique properties. Among these materials, zero-dimensional structures, including fullerenes, carbon nano-onions, carbon nanodiamonds, and carbon dots, possess excellent bioaffinities and superior fluorescence properties that make these structures suitable for application to environmental and biological sensing, imaging, and therapeutics. This review provides a systematic overview of the classification and structural properties, design principles and preparation methods, and optical properties and sensing applications of zero-dimensional carbon nanomaterials. Recent interesting breakthroughs in the sensitive and selective sensing and imaging of heavy metal pollutants, hazardous substances, and bioactive molecules as well as applications in information encryption, super-resolution and photoacoustic imaging, and phototherapy and nanomedicine delivery are the main focus of this review. Finally, future challenges and prospects of these materials are highlighted and envisaged. This review presents a comprehensive basis and directions for designing, developing, and applying fascinating fluorescent sensors fabricated based on zero-dimensional carbon nanomaterials for specific requirements in numerous research fields.

A dual-signal fluorescent colorimetric tetracyclines sensor based on multicolor carbon dots as probes and smartphone-assisted visual assay

The widespread presence of tetracyclines in the environment has raised concerns about the potential risks to ecosystems and human health. The ratiometric fluorescence sensor for detecting tetracyclines was developed using europium-doped carbon dots (Eu-CDs) as probes under alkaline conditions. The sensing mechanism of sensor for tetracyclines was considered as inner filter effect (IFE), antenna effect (AE), and self-quenching effect (SQE). The sensor had a wide linear detection range than the reported europium ions-based tetracyclines sensors. The linear detection ranges of oxytetracycline (OTC), tetracycline (TC), doxycycline (DC) and chlorotetracycline (CTC) were respectively 0.00-603.75 μM, 0.00-623.82 μM, 0.00-594.61 μM and 0.00-601.54 μM, and the corresponding detection limits were respectively 9.50 nM, 15.80 nM, 10.40 nM and 90.30 nM. The smartphone with RGB Color Picker was further employed to analyze the concentration of tetracyclines, which provided a new method for visual tetracyclines detection. The application of Eu-CDs test paper was also explored, and the results showed that the Eu-CDs test paper has great potential application in the visual detection of tetracyclines. In addition, the accuracy of the established tetracyclines sensor was compared with that of the China national standard method by high-performance liquid chromatography (HPLC), and the results showed that the established method in this work has similar accuracy to the China national standard method. The sensor has been employed to detect tetracyclines in the actual samples with satisfactory results, which indicated that this method has promising applications in the real-time monitoring tetracyclines of food and environment.

Near-Field Communication Tag for Colorimetric Glutathione Determination with a Paper-Based Microfluidic Device

Here, we propose a microfluidic paper-based analytical device (µPAD) implemented with a near-field communication (NFC) tag as a portable, simple and fast colorimetric method for glutathione (GSH) determination. The proposed method was based on the fact that Ag⁺ could oxidize 3,3',5,5'-tetramethylbenzidine (TMB) into oxidized blue TMB. Thus, the presence of GSH could cause the reduction of oxidized TMB, which resulted in a blue color fading. Based on this finding, we developed a method for the colorimetric determination of GSH using a smartphone. A µPAD implemented with the NFC tag allowed the harvesting of energy from a smartphone to activate the LED that allows the capture of a photograph of the µPAD by the smartphone. The integration between electronic interfaces into the hardware of digital image capture served as a means for quantitation. Importantly, this new method shows a low detection limit of 1.0 µM. Therefore, the most important features of this non-enzymatic method are high sensitivity and a simple, fast, portable and low-cost determination of GSH in just 20 min using a colorimetric signal.

Environmental application of a cost-effective smartphone-based method for COD analysis: Applicability in the electrochemical treatment of real wastewater

This study aims to develop a cheap method for the evaluation of quality of water or the assessment of the treatment of water by chemical oxygen demand (COD) measurements throughout the use of the HSV color model in digital devices. A free application installed on a smartphone was used for analyzing the images in which the colors were acquired before to be quantified. The proposed method was also validated by the standard and spectrophotometric methods, demonstrating that no significant statistical differences were attained (average accuracy of 97 %). With these results, the utilization of this smartphone-based method for COD analysis was used/evaluated, for first time, by treating electrochemically a real water matrix with substantial organic and salts content using BDD and Pt/Ti anodes. Aiming to understand the performance of both anodes, bulk experiments were performed under real pH by applying current densities (j) of 15, 30, and 60 mA cm^-2. COD abatement results (which were achieved with this novel smart water security solution) clearly showed that different organic matter removal efficiencies were achieved, depending on the electrocatalytic material used as well as the applied current density (42 %, 45 %, and 85 % for Ti/Pt while 93 %, 97 % and total degradation for BDD by applying 15, 30, and 60 mA cm^-2, respectively). However, when the persulfate-mediated oxidation approach was used, with the addition of 2 or 4 g Na₂SO₄ L^-1, COD removal efficiencies were enhanced, obtaining total degradation with 4 g Na₂SO₄ L^-1 and by applying 15 mA cm^-2. Finally, this smartphone imaging-based method provides a simple and rapid method for the evaluation of COD during the use of electrochemical remediation technology, developing and decentralizing analytics technologies for smart water solutions which play a key role in achieving the Sustainable Development Goal 6 (SDG6).

Fluorescent probes based on the core-shell structure of molecular imprinted materials and gold nanoparticles for highly selective glutathione detection

Glutathione (GSH) is a polypeptide with important physiological functions. Real-time and accurate detection of GSH is of great significance for clinical diagnosis, disease treatment and pathogen detection. A fluorescent nanosensor based on composite core-shell nanoparticles for the highly selective detection of GSH is reported. In the cores, the fluorescence of rhodamine b was quenched by using gold nanoparticles (AuNPs), and GSH could competitively combine with AuNPs to cause rhodamine b to fall off, thereby recovering the fluorescence. In the shell part, molecularly imprinted materials using oxidized glutathione (GSSG) as a pseudotemplate provide GSH/GSSG specific pores and improve the specificity and anti-interference ability of the sensor. The GSH sensor has a detection range of 0-100 μM and limit of detection (LOD) of 0.18 μM, and robust sensing performance in fetal bovine serum, indicating its great potential for clinical diagnosis.

Smartphone-assisted miniature device based on nitrogen and sulfur co-doped carbon dots for point-of-care testing of tetracycline

A miniature device was design for the point-of-care testing (POCT) of tetracycline (TC) including a ratio fluorescence test strip, a sample slot, a UV lamp and a smartphone. The nitrogen and sulfur co-doped carbon dots (N, S-CDs) and Eu³⁺ were dropped onto the filter paper to construct the ratio fluorescence test strips for the specific detection of TC. Under the excitation at 390 nm, the fluorescence emission of N, S-CDs at 530 nm decreases through inner filter effect (IEF) after addition of Eu³⁺. When the further addition of TC, the emission of N, S-CDs at 530 nm kept unchanged while the emission of Eu³⁺ at 616 nm was obviously enhanced for the antenna effect (AE) between Eu³⁺ and TC. The ratio changes of the two-fluorescence emission realized the quantitative detection of TC. In addition, the test strips with different concentrations of TC showed different fluorescence color from green to red under a 365 nm UV lamp. The miniature device was designed as a fluorescence photo reader with the merits of the powerful functions of smartphones and the portability of test strips. The smartphone camera takes a fluorescent color image of the test strips and the photos are recognized by a color recognizer on the smartphone to obtain RGB (red-greenblue) values which reflect the concentrations of the analytes. Therefore, we established a fast, sensitive and efficient POCT of TC. In particular, the proposed nanomaterial-based POCT platform will open a new route towards the development of ratio fluorescence probe for TC analysis for environment samples.

A Novel Turn-On Fluorescence Probe Based on Cu(II) Functionalized Metal–Organic Frameworks for Visual Detection of Uric Acid

As an important biomarker in urine, the level of uric acid is of importance for human health. In this work, a Cu(II) functionalized metal–organic framework (Cu²⁺@Tb-MOFs) is designed and developed as a novel fluorescence probe for wide-range uric acid detection in human urine. The study shows that this fluorescence platform demonstrated excellent pH-independent stability, high water tolerance, and good thermal stability. Based on the strong interaction between metal ions and uric acid, the designed Cu²⁺@Tb-MOFs can be employed as efficient turn-on fluorescent probes for the detection of uric acid with wide detection range (0~10⁴ µM) and high sensitivity (LOD = 0.65 µM). This probe also demonstrates an anti-interference property, as other species coexisted, and the possibility for recycling. The sensing mechanisms are further discussed at length. More importantly, we experimentally constructed a molecular logic gate operation based on this fluorescence probe for intelligent detection of uric acid. These results suggest the Cu(II) functionalized metal–organic framework can act as a prominent candidate for personalized monitoring of the concentration of uric acid in the human urine system.

Nanoparticulate Photoluminescent Probes for Bioimaging: Small Molecules and Polymers

Recent interest in research on photoluminescent molecules due to their unique properties has played an important role in advancing the bioimaging field. In particular, small molecules and organic dots as probes have great potential for the achievement of bioimaging because of their desirable properties. In this review, we provide an introduction of probes consisting of fluorescent small molecules and polymers that emit light across the ultraviolet and near-infrared wavelength ranges, along with a brief summary of the most recent techniques for bioimaging. Since photoluminescence probes emitting light in different ranges have different goals and targets, their respective strategies also differ. Diverse and novel strategies using photoluminescence probes against targets have gradually been introduced in the related literature. Among recent papers (published within the last 5 years) on the topic, we here concentrate on the photophysical properties and strategies for the design of molecular probes, with key examples of in vivo photoluminescence research for practical applications. More in-depth studies on these probes will provide key insights into how to control the molecular structure and size/shape of organic probes for expanded bioimaging research and applications.

An α-naphtholphthalein-derived colorimetric fluorescent chemoprobe for the portable and visualized monitoring of Hg2+ by the hydrolysis mechanism

An ɑ-naphtholphthalein-derived colorimetric fluorescent chemoprobe was elaborately designed for the portable and visual monitoring of Hg2+ in environmental and biological samples.

In situ construction of a cobalt oxyhydroxide loaded pyrene-based fluorescent organic nanoprobe for bioimaging of endogenous ascorbic acid in living cells

A novel in situ strategy to fabricate CoOOH nanoflake-loaded pyrene-based FONs (denoted as PyFONs@CoOOH) as proof-of-concept of a sensing platform for direct bioimaging of endogenous AA in living cells.