Ultrasonic cavitation to prepare ECM hydrogels

Functionality of macrophages encapsulated in porcine decellularized adipose matrix hydrogels and interaction with Candida albicans

Extracellular matrix hydrogels are considered one of the most suitable biomaterials for tissue regeneration due to their similarity with the extracellular microenvironment of the native tissue. Their properties are dependent on their composition, material concentration, fiber density and the fabrication approaches, among other factors. The encapsulation of immune cells in this kind of hydrogels, both in absence or presence of a pathogen, represents a promising strategy for the development of platforms that mimic healthy and infected tissues, respectively. In this work, we have encapsulated macrophages in 3D hydrogels of porcine decellularized adipose matrices (pDAMs) without and with the Candida albicans fungus, as 3D experimental models to study the macrophage immunocompetence in a closer situation to the physiological conditions and to mimic an infection scenario. Our results indicate that encapsulated macrophages preserve their functionality within these pDAM hydrogels and phagocytose live pathogens. In addition, their behavior is influenced by the hydrogel pore size, inversely related to the hydrogel concentration. Thus, larger pore size promotes the polarization of macrophages towards M2 phenotype along the time and enhances their phagocytosis capability. It is important to point out that encapsulated macrophages in absence of pathogen showed an M2 phenotype, but macrophages coencapsulated with C. albicans can switch towards an M1 inflammatory phenotype to resolve the infection, depending on the fungus quantity. The present study reveals that pDAM hydrogels preserve the macrophage plasticity, demonstrating their relevance as new models for macrophage-pathogen interaction studies that mimic an infection scenario with application in regenerative medicine research.

Innovative three-dimensional models for understanding mechanisms underlying lung diseases: powerful tools for translational research

Chronic lung diseases result from alteration and/or destruction of lung tissue, inevitably causing decreased breathing capacity and quality of life for patients. While animal models have paved the way for our understanding of pathobiology and the development of therapeutic strategies for disease management, their translational capacity is limited. There is, therefore, a well-recognised need for innovative in vitro models to reflect chronic lung diseases, which will facilitate mechanism investigation and the advancement of new treatment strategies. In the last decades, lungs have been modelled in healthy and diseased conditions using precision-cut lung slices, organoids, extracellular matrix-derived hydrogels and lung-on-chip systems. These three-dimensional models together provide a wide spectrum of applicability and mimicry of the lung microenvironment. While each system has its own limitations, their advantages over traditional two-dimensional culture systems, or even over animal models, increases the value of in vitro models. Generating new and advanced models with increased translational capacity will not only benefit our understanding of the pathobiology of lung diseases but should also shorten the timelines required for discovery and generation of new therapeutics. This article summarises and provides an outline of the European Respiratory Society research seminar "Innovative 3D models for understanding mechanisms underlying lung diseases: powerful tools for translational research", held in Lisbon, Portugal, in April 2022. Current in vitro models developed for recapitulating healthy and diseased lungs are outlined and discussed with respect to the challenges associated with them, efforts to develop best practices for model generation, characterisation and utilisation of models and state-of-the-art translational potential.

Composite Hydrogels of Ultrasound-Assisted-Digested Formic Acid-Decellularized Extracellular Matrix and Sacchachitin Nanofibers Incorporated with Platelet-Rich Plasma for Diabetic Wound Treatment

In this study, an ultrasound-assisted digestion method of a formic acid-decellularized extracellular matrix (dECM) of porcine skin was developed and optimized to form UdECM hydrogels for diabetic wound healing. Results demonstrated that ultrasonication improved the extraction rate of collagen from dECM samples, preserved the collagen content of dECM, reduced residual cells, and extracted greater DNA contents. Scanning electron microscope (SEM) analyses were performed, which demonstrated the optimal porosity on the surface and density of the cross-section in the hydrogel structure, which could control the release of growth factors embedded in UdECM hydrogels at desirable rates to boost wound healing. A wound-healing study was conducted with six different composite hydrogels, both empty materials and materials enriched with rat platelet-rich plasma (R-PRP), sacchachitin nanofibers (SCNFs), and TEMPO-oxidized sacchachitin in diabetic rats. The assessment based on scars stained with hematoxylin and eosin (H&E), Masson's trichrome (MT), and a cluster of differentiation 31 (CD31) staining showed that the UdECM/SC/R-PRP treatment group had the most significant efficacy of promoting healing and even recovery of diabetic wounds to normal tissues. UdECM/R-PRP and UdECM/SCNFs demonstrated better healing rates than UdECM hydrogel scaffolds, which had only recovered 50% resemblance to normal skin. Treatment with both UdECM/TEMPO 050 and UdECM/TEMPO 050/R-PRP hydrogel scaffolds was ranked last, with even poorer efficacy than UdECM hydrogels. In summary, formulated UdECM and SCNF hydrogels loaded with PRP showed synergistic effects of accelerating wound healing and ultimately stimulating the wound to recover as functional tissues. This newly UdECM/SCNF composite hydrogel has promising potential for healing and regenerating diabetic wounds.

Decellularized ECM hydrogels: prior use considerations, applications, and opportunities in tissue engineering and biofabrication

Tissue development, wound healing, pathogenesis, regeneration, and homeostasis rely upon coordinated and dynamic spatial and temporal remodeling of extracellular matrix (ECM) molecules. ECM reorganization and normal physiological tissue function, require the establishment and maintenance of biological, chemical, and mechanical feedback mechanisms directed by cell-matrix interactions. To replicate the physical and biological environment provided by the ECM in vivo, methods have been developed to decellularize and solubilize tissues which yield organ and tissue-specific bioactive hydrogels. While these biomaterials retain several important traits of the native ECM, the decellularizing process, and subsequent sterilization, and solubilization result in fragmented, cleaved, or partially denatured macromolecules. The final product has decreased viscosity, moduli, and yield strength, when compared to the source tissue, limiting the compatibility of isolated decellularized ECM (dECM) hydrogels with fabrication methods such as extrusion bioprinting. This review describes the physical and bioactive characteristics of dECM hydrogels and their role as biomaterials for biofabrication. In this work, critical variables when selecting the appropriate tissue source and extraction methods are identified. Common manual and automated fabrication techniques compatible with dECM hydrogels are described and compared. Fabrication and post-manufacturing challenges presented by the dECM hydrogels decreased mechanical and structural stability are discussed as well as circumvention strategies. We further highlight and provide examples of the use of dECM hydrogels in tissue engineering and their role in fabricating complex in vitro 3D microenvironments.

Evaluation of biocompatibility and angiogenic potential of extracellular matrix hydrogel biofunctionalized with the LL-37 peptide

BACKGROUND

Biomaterials must allow revascularization for a successful tissue regeneration process. Biomaterials formulated from the extracellular matrix (ECM) have gained popularity in tissue engineering because of their superior biocompatibility, and due to their rheological properties, ECM-hydrogels can be easily applied in damaged areas, allowing cell colonization and integration into the host tissue. Porcine urinary bladder ECM (pUBM) retains functional signaling and structural proteins, being an excellent option in regenerative medicine. Even some small molecules, such as the antimicrobial cathelicidin-derived LL-37 peptide have proven angiogenic properties.

OBJECTIVE

The objective of this study was to evaluate the biocompatibility and angiogenic potential of an ECM-hydrogel derived from the porcine urinary bladder (pUBMh) biofunctionalized with the LL-37 peptide (pUBMh/LL37).

METHODS

Macrophages, fibroblasts, and adipose tissue-derived mesenchymal stem cells (AD-MSC) were exposed pUBMh/LL37, and the effect on cell proliferation was evaluated by MTT assay, cytotoxicity by quantification of lactate dehydrogenase release and the Live/Dead Cell Imaging assays. Moreover, macrophage production of IL-6, IL-10, IL-12p70, MCP-1, INF-γ, and TNF-α cytokines was quantified using a bead-based cytometric array. pUBMh/LL37 was implanted directly by dorsal subcutaneous injection in Wistar rats for 24 h to evaluate biocompatibility, and pUBMh/LL37-loaded angioreactors were implanted for 21 days for evaluation of angiogenesis.

RESULTS

We found that pUBMh/LL37 did not affect cell proliferation and is cytocompatible to all tested cell lines but induces the production of TNF-α and MCP-1 in macrophages. In vivo, this ECM-hydrogel induces fibroblast-like cell recruitment within the material, without tissue damage or inflammation at 48 h. Interestingly, tissue remodeling with vasculature inside angioreactors was seen at 21 days.

CONCLUSIONS

Our results showed that pUBMh/LL37 is cytologically compatible, and induces angiogenesis in vivo, showing potential for tissue regeneration therapies.

Intelligent Three-Dimensional Reconstruction Algorithm-Based Ultrasound-Guided Nerve Block in Intraoperative Anesthesia and Postoperative Analgesia of Orthopedic Surgery

This research was aimed at analyzing the role of ultrasound-guided nerve block based on intelligent three-dimensional (3D) reconstruction algorithm in intraoperative anesthesia and postoperative analgesia of orthopedic surgery. 68 elderly patients were undergoing orthopedic surgery on the lower extremities, and they were randomly rolled into two groups with 34 patients in each group. The patients in control group received sciatic nerve block anesthesia (SNBA), and the patients in the experimental group received ultrasound-guided SNBA (UG-SNBA) under 3D reconstruction algorithm to analyze and compare the anesthesia effect and the postoperative analgesia effect. The results showed that compared with other algorithms, the evaluation index of ultrasound images processed by the 3D reconstruction algorithm was better. In terms of anesthesia effect, there was no significant difference in systolic blood pressure, diastolic blood pressure, and heart rate between the two groups before surgery ( $P>0.05$ ). Intraoperative and postoperative indicators of the experimental group were significantly better than those of the control group; the drug dosage (61 mg) was less than that of the control group (78 mg). In addition, the onset time of anesthesia, the time of pain blockade, and the postoperative awake time (5 minutes, 8 minutes, and 8 minutes, respectively) were shorter than those in the control group (13 minutes, 15 minutes, and 15 minutes, respectively). The visual analogue scale (VAS) scores of the experimental group were better than those of the control group on the day after surgery, one day after surgery, two days after surgery, and three days after surgery, with significant differences ( $P<0.05$ ). In summary, 3D reconstruction algorithm-based ultrasound image effect was clearer, the effect of UG-SNBA was more stable, and the postoperative analgesic effect was better. This work provided a higher reference for the selection of safe and effective anesthesia options in orthopedic surgery.

Ultrasound in cellulose-based hydrogel for biomedical use: From extraction to preparation

As the most abundant natural polymer on the pl anet, cellulose has a wide range of applications in the biomedical field. Cellulose-based hydrogels further expand the applications of this class of biomaterials. However, a number of publications and technical reports are mainly about traditional preparation methods. Sonochemistry offers a simple and green route to material synthesis with the biomedical application of ultrasound. The tiny acoustic bubbles, produced by the propagating sound wave, enclose an incredible facility where matter interact among at energy as high as 13 eV to spark extraordinary chemical reactions. Ultrasonication not only improves the efficiency of cellulose extraction from raw materials, but also influences the hydrogel preparation process. The primary objective of this article is to review the literature concerning the biomedical cellulose-based hydrogel prepared via sonochemistry and application of ultrasound for hydrogel. An innovated category of recent generations of hydrogel materials prepared via ultrasound was also presented in some details.

Engineering of Tracheal Grafts Based on Recellularization of Laser-Engraved Human Airway Cartilage Substrates

OBJECTIVE

Implantation of tissue-engineered tracheal grafts represents a visionary strategy for the reconstruction of tracheal wall defects after resections and may develop into a last chance for a number of patients with severe cicatricial stenosis. The use of a decellularized tracheal substrate would offer an ideally stiff graft, but the matrix density would challenge efficient remodeling into a living cartilage. In this study, we hypothesized that the pores of decellularized laser-perforated tracheal cartilage (LPTC) tissues can be colonized by adult nasal chondrocytes (NCs) to produce new cartilage tissue suitable for the repair of tracheal defects.

DESIGN

Human, native tracheal specimens, isolated from cadaveric donors, were exposed to decellularized and laser engraving-controlled superficial perforation (300 μm depth). Human or rabbit NCs were cultured on the LPTCs for 1 week. The resulting revitalized tissues were implanted ectopically in nude mice or orthotopically in tracheal wall defects in rabbits. Tissues were assayed histologically and by microtomography analyses before and after implantation.

RESULTS

NCs were able to efficiently colonize the pores of the LPTCs. The extent of colonization (i.e., percentage of viable cells spanning >300 μm of tissue depth), cell morphology, and cartilage matrix deposition improved once the revitalized constructs were implanted ectopically in nude mice. LPTCs could be successfully grafted onto the tracheal wall of rabbits without any evidence of dislocation or tracheal stenosis, 8 weeks after implantation. Rabbit NCs, within the LPTCs, actively produced new cartilage matrix.

CONCLUSION

Implantation of NC-revitalized LPTCs represents a feasible strategy for the repair of tracheal wall defects.

The Translational Application of Hydrogel for Organoid Technology: Challenges and Future Perspectives

Human organoids mimic the physiology and tissue architecture of organs and are of great significance for promoting the study of human diseases. Traditionally, organoid cultures rely predominantly on animal or tumor-derived extracellular matrix (ECM), resulting in poor reproducibility. This limits their utility in for large-scale drug screening and application for regenerative medicine. Recently, synthetic polymeric hydrogels, with high biocompatibility and biodegradability, stability, uniformity of compositions, and high throughput properties, have emerged as potential materials for achieving 3D architectures for organoid cultures. Compared to conventional animal or tumor-derived organoids, these newly engineered hydrogel-based organoids more closely resemble human organs, as they are able to mimic native structural and functional properties observed in-situ. In this review, recent developments in hydrogel-based organoid culture will be summarized, emergent hydrogel technology will be highlighted, and future challenges in applying them to organoid culture will be discussed.

Research progress in decellularized extracellular matrix-derived hydrogels

Decellularized extracellular matrix (dECM) is widely used in regenerative medicine as a scaffold material due to its unique biological activity and good biocompatibility. Hydrogel is a three-dimensional network structure polymer with high water content and high swelling that can simulate the water environment of human tissues, has good biocompatibility, and can exchange nutrients, oxygen, and waste with cells. At present, hydrogel is the ideal biological material for tissue engineering. In recent years, rapid development of the hydrogel theory and technology and progress in the use of dECM to form hydrogels have attracted considerable attention to dECM hydrogels as an innovative method for tissue engineering and regenerative medicine. This article introduces the classification of hydrogels, and focuses on the history and formation of dECM hydrogels, the source of dECM, the application of dECM hydrogels in tissue engineering and the commercial application of dECM materials.

Advances in 3D bioprinting technology for cardiac tissue engineering and regeneration

Cardiovascular disease is still one of the leading causes of death in the world, and heart transplantation is the current major treatment for end-stage cardiovascular diseases. However, because of the shortage of heart donors, new sources of cardiac regenerative medicine are greatly needed. The prominent development of tissue engineering using bioactive materials has creatively laid a direct promising foundation. Whereas, how to precisely pattern a cardiac structure with complete biological function still requires technological breakthroughs. Recently, the emerging three-dimensional (3D) bioprinting technology for tissue engineering has shown great advantages in generating micro-scale cardiac tissues, which has established its impressive potential as a novel foundation for cardiovascular regeneration. Whether 3D bioprinted hearts can replace traditional heart transplantation as a novel strategy for treating cardiovascular diseases in the future is a frontier issue. In this review article, we emphasize the current knowledge and future perspectives regarding available bioinks, bioprinting strategies and the latest outcome progress in cardiac 3D bioprinting to move this promising medical approach towards potential clinical implementation.

Preparation of 3D Printed Chitosan/Polyvinyl Alcohol Double Network Hydrogel Scaffolds

In this work, a 3D printed double-network (DN) hydrogel scaffold is designed with chitosan (CS) and polyvinyl alcohol (PVA) as the framework matrix. The addition of PVA into the CS-based hydrogel clearly enhances the mechanical properties and lowers the swelling behaviors of the hydrogels. The crosslinking of CS with genipin can perform the pre-crosslinking to improve the viscosity and 3D printability of the hydrogel precursor, while increasing the PVA content results in lowering the viscosity and 3D printability of the pre-crosslinked hydrogel. The antibacterial property results of the DN hydrogel display that the hydrogel have favorable long-lasting antibacterial ability. The appropriate pre-crosslinked hydrogel with the CS/PVA mass ratio of 3:10 and pre-crosslinking time of 7 h is used for 3D printing to prepare the 3D printed porous DN hydrogels. Moreover, the anti-tumor drug doxorubicin (DOX) is loaded into the 3D printed porous DN hydrogels and the in vitro release study displays the sustainable drug release behavior. And the DOX release from hydrogel scaffold can be adjusted by the pH value of release environment. All of the results indicate that the porous DN CS/PVA hydrogel scaffolds have great application potential for tissue regeneration.