Improved synthesis of [(18)F]FLETT via a fully automated vacuum distillation method for [(18)F]2-fluoroethyl azide purification

18F-labeling and initial in vivo evaluation of a Hitomi peptide for imaging tissue transglutaminase 2

INTRODUCTION

Tissue transglutaminase 2 (TG2) is a calcium-dependent enzyme which cross-links proteins. It is overexpressed in many diseases and plays a key role in tissue remodeling, including cell adhesion and migration. Overexpression of TG2 in breast cancer is a marker for patients at risk of recurrence. Non-invasive imaging of TG2 can therefore play an important role in patient management. TG2 probes labeled with the positron emitters ¹¹C and ¹⁸F have thus far not found widespread application due to purity and metabolism issues. Our approach was to radiolabel a TG2 selective, 13-mer amino acid peptide, which was modified with a 5-azidopentanoic acid group at the N-terminus via a copper free click chemistry approach.

METHODS

Radiochemistry was performed and fully automated using an iPhase FlexLab module. We produced the radiolabeling synthon [¹⁸F]FBz-DBCO from [¹⁸F]SFB and DBCO-amine. After HPLC purification, [¹⁸F]FBz-DBCO was reacted with the modified peptide and the putative radiotracer purified by HPLC. In vivo imaging using the radiolabeled amine was performed in mice bearing either TG2 expressing MDA-MB-231 or non-TG2 expressing MCF-7 xenografts as negative control. Expression of the target was confirmed using immunohistochemistry and western blot techniques.

RESULTS

We obtained 9 ± 2 GBq of the radiolabeled peptide from 55 ± 5 GBq of fluorine-18 in an overall synthesis time of 160 min from end of bombardment (EOB), including HPLC purification and reformulation. Small animal PET/MR imaging showed that visualization of MDA-MB-231 tumors using the radiolabeled peptide could only be achieved due to differences in clearance between tumor and surrounding tissue. In the MCF-7 xenograft model, radiotracer clearance from tumor and surrounding tissue occurred at a similar rate, thus making it impossible to visualize MCF-7 tumors. The presence of TG2 in MDA-MB-231 tumors and absence in MCF-7 tumors was confirmed by immunohistochemistry staining and western blot analysis.

CONCLUSION

A fully automated synthesis of a TG2 selective, 13-amino-acid peptide modified with 5-azido pentynoic acid at the N-terminal was established using [¹⁸F]FBzDBCO as a prosthetic group. Although our results show that radiolabeled peptides have potential as imaging agents for TG2, more research needs to be performed to improve radiotracer kinetics.

Synthesis and fluorine-18 radiolabeling of a phospholipid as a PET imaging agent for prostate cancer

INTRODUCTION

Altered lipid metabolism and subsequent changes in cellular lipid composition have been observed in prostate cancer cells, are associated with poor clinical outcome, and are promising targets for metabolic therapies. This study reports for the first time on the synthesis of a phospholipid radiotracer based on the phospholipid 1,2-didocosahexaenoyl-sn-glycero-3-phosphocholine (PC44:12) to allow tracking of polyunsaturated lipid tumor uptake via PET imaging. This tracer may aid in the development of strategies to modulate response to therapies targeting lipid metabolism in prostate cancer.

METHODS

Lipidomics analysis of prostate tumor explants and LNCaP tumor cells were used to identify PC44:12 as a potential phospholipid candidate for radiotracer development. Synthesis of phosphocholine precursor and non-radioactive standard were optimised using click chemistry. The biodistribution of a fluorine-18 labeled analogue, N-{[4-(2-[¹⁸F]fluoroethyl)-2,3,4-triazol-1-yl]methyl}-1,2-didocosahexaenoyl-sn-glycero-3-phosphocholine ([¹⁸F]2) was determined in LNCaP prostate tumor-bearing NOD SCID gamma mice by ex vivo biodistribution and PET imaging studies and compared to biodistribution of [¹⁸F]fluoromethylcholine.

RESULTS

[¹⁸F]2 was produced with a decay-corrected yield of 17.8 ± 3.7% and an average radiochemical purity of 97.00 ± 0.89% (n = 6). Molar activity was 85.1 ± 3.45 GBq/μmol (2300 ± 93 mCi/μmol) and the total synthesis time was 2 h. Ex vivo biodistribution data demonstrated high liver uptake (41.1 ± 9.2%ID/g) and high splenic uptake (10.9 ± 9.1%ID/g) 50 min post-injection. Ex vivo biodistribution showed low absolute tumor uptake of [¹⁸F]2 (0.8 ± 0.3%ID/g). However, dynamic PET imaging demonstrated an increase over time of the relative tumor-to-muscle ratio with a peak of 2.8 ± 0.5 reached 1 h post-injection. In contrast, dynamic PET of [¹⁸F]fluoromethylcholine demonstrated no increase in tumor-to-muscle ratios due to an increase in both tumor and muscle over time. Absolute uptake of [¹⁸F]fluoromethylcholine was higher and peaked at 60 min post injection (2.25 ± 0.29%ID/g) compared to [¹⁸F]2 (1.44 ± 0.06%ID/g) during the 1 h dynamic scan period.

CONCLUSIONS AND ADVANCES IN KNOWLEDGE

This study demonstrates the ability to radiolabel phospholipids and indicates the potential to monitor the in vivo distribution of phospholipids using fluorine-18 based PET.

Synthesis and validation of [18F]mBPET-1, a fluorine-18 labelled mTOR inhibitor derivative based on a benzofuran backbone

Background

Targeted therapy of HER2 positive breast cancer has led to clinical success in some cases with primary and secondary resistance being major obstacles. Due to the substantial involvement of mTOR kinase in cell growth and proliferation pathways it is now targeted in combination treatments to counteract HER2 targeted therapy resistance. However, the selection of receptive patient populations for a specific drug combination is crucial. This work aims to develop a molecular probe capable of identifying patients with tumour populations which are receptive to RAD001 combination therapy. Based on the structure of a mTOR inhibitor specific for mTORC1, we designed, synthesised and characterised a novel benzofuran based molecular probe which suits late stage fluorination via Click chemistry.

Results

Synthesis of the alkyne precursor 5 proceeded in 27.5% yield over 7 linear steps. Click derivatisation gave the non-radioactive standard in 25% yield. Radiosynthesis of [¹⁸F]1-((1-(2-Fluoroethyl)-1H-1,2,3-triazol-4-yl) methyl)-4-((5-methoxy-2-phenylbenzofuran-4-yl) methyl) piperazine ([¹⁸F]mBPET-1) proceeded over two steps which were automated on an iPhase FlexLab synthesis module. In the first step, 2-[¹⁸F]fluoroethylazide ([¹⁸F]6) was produced, purified by automated distillation in 60% non-decay-corrected yield and subjected to Click conditions with 5. Semi-preparative RP-HPLC purification and reformulation gave [¹⁸F]mBPET-1 in 40% ± 5% (n = 6) overall RCY with a process time of 90 min. Radiochemical purity was ≥99% at end of synthesis (EOS) and ≥ 98% after 4 h at room temperature. Molar activities ranged from typically 24.8 GBq/μmol (EOS) to a maximum of 78.6 GBq/μmol (EOS). Lipophilicity of [¹⁸F]mBPET-1 was determined at pH 7.4 (logD_7.4 = 0.89). [¹⁸F]mBPET-1 showed high metabolic stability when incubated with mouse S9 liver fractions which resulted in a 0.8% drop in radiochemical purity after 3 h. Cell uptake assays showed 1.3–1.9-fold increased uptake of the [¹⁸F]mBPET-1 in RAD001 sensitive compared to insensitive cells across a panel of 4 breast cancer cell lines.

Conclusion

Molecular targeting of mTOR with [¹⁸F]mBPET-1 distinguishes mTOR inhibitor sensitive and insensitive cell lines. Future studies will explore the ability of [¹⁸F]mBPET-1 to predict response to mTOR inhibitor treatment in in vivo models.

Fully automated peptide radiolabeling from [18F]fluoride

The biological properties of receptor-targeted peptides have made them popular diagnostic imaging and therapeutic agents. Typically, the synthesis of fluorine-18 radiolabeled receptor-targeted peptides for positron emission tomography (PET) imaging is a time consuming, complex, multi-step synthetic process that is highly variable based on the peptide. The complexity associated with the radiolabeling route and lack of robust automated protocols can hinder translation into the clinic. A fully automated batch production to radiolabel three peptides (YGGFL, cRGDyK, and Pyr-QKLGNQWAVGHLM) from fluorine-18 using the ELIXYS FLEX/CHEM® radiosynthesizer in a two-step process is described. First, the prosthetic group, 6-[¹⁸F]fluoronicotinyl-2,3,5,6-tetrafluorophenyl ester ([¹⁸F]FPy-TFP) was synthesized and subsequently attached to the peptide. The [¹⁸F]FPy-peptides were synthesized in 13-26% decay corrected yields from fluorine-18 with high molar activity 1-5 Ci μmol^-1 and radiochemical purity of >99% in an overall synthesis time of 97 ± 3 minutes.

Fluorine-18 labelled building blocks for PET tracer synthesis

This review presents a comprehensive overview of the synthesis and application of fluorine-18 labelled building blocks since 2010.

Fully automated synthesis of [(18) F]fluoro-dihydrotestosterone ([(18) F]FDHT) using the FlexLab module

Imaging of androgen receptor expression in prostate cancer using F-18 FDHT is becoming increasingly popular. With the radiolabelling precursor now commercially available, developing a fully automated synthesis of [(18) F] FDHT is important. We have fully automated the synthesis of F-18 FDHT using the iPhase FlexLab module using only commercially available components. Total synthesis time was 90 min, radiochemical yields were 25-33% (n = 11). Radiochemical purity of the final formulation was > 99% and specific activity was > 18.5 GBq/µmol for all batches. This method can be up-scaled as desired, thus making it possible to study multiple patients in a day. Furthermore, our procedure uses 4 mg of precursor only and is therefore cost-effective. The synthesis has now been validated at Austin Health and is currently used for [(18) F]FDHT studies in patients. We believe that this method can easily adapted by other modules to further widen the availability of [(18) F]FDHT.

Ortho-Stabilized (18) F-Azido Click Agents and their Application in PET Imaging with Single-Stranded DNA Aptamers

Azido (18) F-arenes are important and versatile building blocks for the radiolabeling of biomolecules via Huisgen cycloaddition ("click chemistry") for positron emission tomography (PET). However, routine access to such clickable agents is challenged by inefficient and/or poorly defined multistep radiochemical approaches. A high-yielding direct radiofluorination for azido (18) F-arenes was achieved through the development of an ortho-oxygen-stabilized iodonium derivative (OID). This OID strategy addresses an unmet need for a reliable azido (18) F-arene clickable agent for bioconjugation reactions. A ssDNA aptamer was radiolabeled with this agent and visualized in a xenograft mouse model of human colon cancer by PET, which demonstrates that this OID approach is a convenient and highly efficient way of labeling and tracking biomolecules.