Cells immobilized on patterns printed in DNA by an inkjet printer

Surface modulation of extracellular vesicles with cell-penetrating peptide-conjugated lipids for improvement of intracellular delivery to endothelial cells

Exosomes (diameter 30-200 nm) are a subtype of extracellular vesicles secreted by cells containing DNA, microRNA (miRNA), and proteins. Exosomes are expected to be valuable as a means of delivering drugs or functional miRNAs in treatment of diseases. However, the delivery of exosomes is not sufficiently effective, even though exosomes have intrinsic delivery functions. Cell-penetrating peptides (CPPs) are short peptide families that facilitate cellular intake of molecules and vesicles. We previously reported that the modification of cells, and liposomes with CPP-conjugated-lipids, CPPs conjugated with poly (ethylene glycol)-conjugated phospholipids (PEG-lipid), that induce adhesion by CPPs, can be useful for cell-based assays and harvesting liposomes. In this study, we aimed to modulate the exosome surface using Tat peptide (YGRKKRRQRRR)-PEG-lipids to improve intracellular delivery to endothelial cells. We isolated and characterized exosomes from the medium of HEK 293 T cell cultures. Tat conjugated PEG-lipids with different spacer molecular weights and lipid types were incorporated into exosomes using fluorescein isothiocyanate labeling to optimize the number of Tat-PEG-lipids immobilized on the exosome surface. The exosomes modified with Tat-PEG-lipids were incubated with human umbilical vein endothelial cells (HUVECs) to study the interaction. Tat conjugated with 5 kDa PEG and C16 lipids incorporated on the exosome surface were highly detected inside HUVECs by flow cytometry. Fluorescence was negligible in HUVECs for control groups. Thus, Tat-PEG-lipids can be modified on the exosome surface, improving the intracellular delivery of exosomes.

Enhancement of intercellular interaction between iPSC-derived neural progenitor cells and activated endothelial cells using cell surface modification with functional oligopeptides

Cell-based therapy has been used to treat stroke related disorders, which have no treatment options available 4.5 hours after onset. Although the administration of tissue plasminogen activator and mechanical thrombectomy are potent treatments, their clinical implementation is limited within the available time. Here, we aimed to use induced pluripotent stem cell-derived neural progenitor cells (NPCs) for stroke treatment with higher delivery efficiency in stroke areas, which will improve the therapeutic effect. E-selectin binding oligopeptide (Esbp) was conjugated with poly(ethylene glycol)-conjugated-lipid (Esbp-PEG-lipid) with different molecular weights of PEG (5 and 40 kDa) for cell surface modification. Then, we optimized the cell surface modification of NPCs by studying cell-binding ability onto the model surfaces of stroke areas, such as recombinant E-selectin-immobilized surfaces and TNF-α activated endothelium. As a result, the cell surface modification of NPCs with Esbp-PEG-lipid was found to induce specific intercellular interactions with the activated endothelium through the binding of Esbp with E-selectin. Additionally, the shorter PEG spacer was suitable for intercellular interactions. Thus, our technique shows potential for use in cell therapy with enhanced cell accumulation in infarct areas.

Methods of Encapsulation of Biomacromolecules and Living Cells. Prospects of Using Metal–Organic Frameworks

The review discusses different methods of encapsulation and biomineralization of macromolecules and living cells. Main advantages and disadvantages of most commonly used carriers, matrices, and materials for immobilization of proteins, enzymes, nucleic acids, and living cells are briefly surveyed. Examples of delivery vehicles for multifunctional encapsulation of protein-like substances are presented. Particular attention is paid to prospects of using metal–organic frameworks in medicine and biotechnology.

Engineered Tools to Study Intercellular Communication

All multicellular organisms rely on intercellular communication networks to coordinate physiological functions. As members of a dynamic social network, each cell receives, processes, and redistributes biological information to define and maintain tissue homeostasis. Uncovering the molecular programs underlying these processes is critical for prevention of disease and aging and development of therapeutics. The study of intercellular communication requires techniques that reduce the scale and complexity of in vivo biological networks while resolving the molecular heterogeneity in "omic" layers that contribute to cell state and function. Recent advances in microengineering and high-throughput genomics offer unprecedented spatiotemporal control over cellular interactions and the ability to study intercellular communication in a high-throughput and mechanistic manner. Herein, this review discusses how salient engineered approaches and sequencing techniques can be applied to understand collective cell behavior and tissue functions.

Potential of Cell Surface Engineering with Biocompatible Polymers for Biomedical Applications

The regulation of the cellular surface with biomaterials can contribute to the progress of biomedical applications. In particular, the cell surface is exposed to immunological surveillance and reactions in transplantation therapy, and modulation of cell surface properties might improve transplantation outcomes. The transplantation of therapeutic cells, tissue, and organs is an effective and fundamental treatment and has contributed to saving lives and improving quality of life. Because of shortages, donor cells, tissues, and organs are carefully transplanted with the goal of retaining activity and viability. However, some issues remain to be resolved in terms of reducing side effects, improving graft survival, managing innate and adaptive immune responses, and improving transplant storage and procedures. Given that the transplantation process involves multiple steps and is technically complicated, an engineering approach together with medical approaches to resolving these issues could enhance success. In particular, cell surface engineering with biocompatible polymers looks promising for improving transplantation therapy and has potential for other biomedical applications. Here we review the significance of polymer-based surface modification of cells and organs for biomedical applications, focusing on the following three topics: Cell protection: cellular protection through local immune regulation using cell surface modification with biocompatible polymers. This protection could extend to preventing attack by the host immune system, freeing recipients from taking immunosuppressive drugs, and avoiding a second transplantation. Cell attachment: cell manipulation, which is an important technique for delivery of therapeutic cells and their alignment for recellularization of decellularized tissues and organs in regenerative therapy. Cell fusion: fusion of different cells, which can lead to the formation of new functional cells that could be useful for generating, e.g., immunologically competent or metabolically active cells.

Inkjet Bioprinting of Biomaterials

The inkjet technique has the capability of generating droplets in the picoliter volume range, firing thousands of times in a few seconds and printing in the noncontact manner. Since its emergence, inkjet technology has been widely utilized in the publishing industry for printing of text and pictures. As the technology developed, its applications have been expanded from two-dimensional (2D) to three-dimensional (3D) and even used to fabricate components of electronic devices. At the end of the twentieth century, researchers were aware of the potential value of this technology in life sciences and tissue engineering because its picoliter-level printing unit is suitable for depositing biological components. Currently inkjet technology has been becoming a practical tool in modern medicine serving for drug development, scaffold building, and cell depositing. In this article, we first review the history, principles and different methods of developing this technology. Next, we focus on the recent achievements of inkjet printing in the biological field. Inkjet bioprinting of generic biomaterials, biomacromolecules, DNAs, and cells and their major applications are introduced in order of increasing complexity. The current limitations/challenges and corresponding solutions of this technology are also discussed. A new concept, biopixels, is put forward with a combination of the key characteristics of inkjet printing and basic biological units to bring a comprehensive view on inkjet-based bioprinting. Finally, a roadmap of the entire 3D bioprinting is depicted at the end of this review article, clearly demonstrating the past, present, and future of 3D bioprinting and our current progress in this field.

3D bioprinting for musculoskeletal applications

This review focuses on developments in the field of bioprinting for musculoskeletal tissue engineering, along with discussion on the various approaches for bone, cartilage and connective tissue fabrication. All approaches (cell-laden, cell-free and a combination of both) aim to obtain complex, living tissues able to develop and mature, using the same fundamental technology. To date, co-printing of cell-laden and cell-free materials has been revealed to be the most promising approach for musculoskeletal applications because materials with good bioactivity and good mechanical strength can be combined within the same constructs. Bioprinting for musculoskeletal applications is a developing field, and detailed discussion on the current challenges and future perspectives is also presented in this review.

Cell Adhesion Induced Using Surface Modification with Cell-Penetrating Peptide-Conjugated Poly(ethylene glycol)-Lipid: A New Cell Glue for 3D Cell-Based Structures

We synthesized a novel material, cell-penetrating peptide-conjugated poly(ethylene glycol)-lipid (CPP-PEG-lipid), that can induce the adhesion of floating cells. Firm cell adhesion with spreading could be induced by cell surface modification with the CPP-PEG-lipids. Cell adhesion was induced by CPPs but not by any other cationic short peptides we tested. Here, we demonstrated adherence using the floating cell line CCRF-CEM as well as primary human T cells, B cells, erythrocytes, and hepatocytes. As compared to cells grown in suspension, adherent cells were more rapidly induced to attach to substrates with the cell-surface modification. The critical factor for attachment was localization of CPPs at the cell membrane by PEG-lipids with PEG > 20 kDa. These cationic CPPs on PEG chains were able to interact with substrate surfaces such as polystyrene (PS) surfaces, glass surfaces, and PS microfibers that are negatively charged, inducing firm cell adhesion and cell spreading. Also, as opposed to normal cationic peptides that interact strongly with cell membranes, CPPs were less interactive with the cell surfaces because of their cell-penetrating property, making them more available for adhering cells to the substrate surface. No effects on cell viability or cell proliferation were observed after the induction of cell adhesion. With this technique, cells could be easily immobilized onto PS microfibers, an important step in fabricating 3D cell-based structures. Cells immobilized onto 3D PS microfibers were alive, and human hepatocytes showed normal production of urea and albumin on the microfibers. This method is novel in inducing firm cell adhesion via a one-step treatment.

A hybrid of cells and pancreatic islets toward a new bioartificial pancreas

Cell surface engineering using single-stranded DNA-poly(ethylene glycol)-conjugated phospholipid (ssDNA-PEG-lipid) is useful for inducing cell-cell attachment two and three dimensionally. In this review, we summarize our recent techniques for cell surface engineering and their applications to islet transplantation. Because any DNA sequence can be immobilized onto the cell surface by hydrophobic interactions between ssDNA-PEG-lipid and the cellular membrane without impairing cell function, a cell-cell hybrid can be formed through the DNA hybridization. With this technique, it would be possible to create three-dimensional hybrid structures of pancreatic islets coated with various accessory cells, such as patients' own cells, mesenchymal and adipose-derived stem cells, endothelial progenitor cells, neural crest stem cells or regulatory T cells, which might significantly improve the outcome of islet transplantation in diabetic patients.

Generation of a patterned co-culture system composed of adherent cells and immobilized nonadherent cells

Patterned co-culture is a promising technique used for fundamental investigation of cell-cell communication and tissue engineering approaches. However, conventional methods are inapplicable to nonadherent cells. In this study, we aimed to establish a patterned co-culture system composed of adherent and nonadherent cells. Nonadherent cells were immobilized on a substrate using a cell membrane anchoring reagent conjugated to a protein, in order to incorporate them into the co-culture system. Cross-linked albumin film, which has unique surface properties capable of regulating protein adsorption, was used to control their spatial localization. The utility of our approach was demonstrated through the fabrication of a patterned co-culture consisting of micropatterned neuroblastoma cells surrounded by immobilized myeloid cells. Furthermore, we also created a co-culture system composed of cancer cells and immobilized monocytes. We observed that monocytes enhanced the drug sensitivity of cancer cells and its influence was limited to cancer cells located near the monocytes. Therefore, the incorporation of nonadherent cells into a patterned co-culture system is useful for creating culture systems containing immune cells, as well as investigating the influence of these immune cells on cancer drug sensitivity.

STATEMENT OF SIGNIFICANCE

Various methods have been proposed for creating patterned co-culture systems, in which multiple cell types are attached to a substrate with a desired pattern. However, conventional methods, including our previous report published in Acta Biomaterialia (2010, 6, 526-533), are unsuitable for nonadherent cells. Here, we developed a novel method that incorporates nonadherent cells into the co-culture system, which allows us to precisely manipulate and study microenvironments containing nonadherent and adherent cells. Using this technique, we demonstrated that monocytes (nonadherent cells) could enhance the drug sensitivity of cancer cells and that their influence had a limited effective range. Thus, our technique is useful for recreating complex tissues in order to investigate cellular interactions involving nonadherent cells.

DNA Polymer Brush Patterning through Photocontrollable Surface-Initiated DNA Hybridization Chain Reaction

The fabrication of DNA polymer brushes with spatial resolution onto a solid surface is a crucial step for biochip research and related applications, cell-free gene expression study, and even artificial cell fabrication. Here, for the first time, a DNA polymer brush patterning method is reported based on the photoactivation of an ortho-nitrobenzyl linker-embedded DNA hairpin structure and a subsequent surface-initiated DNA hybridization chain reaction (HCR). Inert DNA hairpins are exposed to ultraviolet light irradiation to generate DNA duplexes with two active sticky ends (toeholds) in a programmable manner. These activated DNA duplexes can initiate DNA HCR to generate multifunctional patterned DNA polymer brushes with complex geometrical shapes. Different multifunctional DNA polymer brush patterns can be fabricated on certain areas of the same solid surface using this method. Moreover, the patterned DNA brush surface can be used to capture target molecules in a desired manner.

Hierarchical-Multiplex DNA Patterns Mediated by Polymer Brush Nanocone Arrays That Possess Potential Application for Specific DNA Sensing

This paper provides a facile and cost-efficient method to prepare single-strand DNA (ssDNA) nanocone arrays and hierarchical DNA patterns that were mediated by poly(2-hydroxyethyl methacrylate) (PHEMA) brush. The PHEMA brush nanocone arrays with different morphology and period were fabricated via colloidal lithography. The hierarchical structure was prepared through the combination of colloidal lithography and traditional photolithography. The DNA patterns were easily achieved via grafting the amino group modified ssDNA onto the side chain of polymer brush, and the anchored DNA maintained their reactivity. The as-prepared ssDNA nanocone arrays can be applied for target DNA sensing with the detection limit reaching 1.65 nM. Besides, with the help of introducing microfluidic ideology, the hierarchical-multiplex DNA patterns on the same substrate could be easily achieved with each kind of pattern possessing one kind of ssDNA, which are promising surfaces for the preparation of rapid, visible, and multiplex DNA sensors.

Development of large-scale size-controlled adult pancreatic progenitor cell clusters by an inkjet-printing technique

The generation of transplantable β-cells from pancreatic progenitor cells (PPCs) could serve as an ideal cell-based therapy for diabetes. Because the transplant efficiency depends on the size of islet-like clusters, it becomes one of the key research topics to produce PPCs with controlled cluster sizes in a scalable manner. In this study, we used inkjet printing to pattern biogenic nanoparticles, i.e., mutant tobacco mosaic virus (TMV), with different spot sizes to support the formation of multicellular clusters by PPCs. We successfully achieved TMV particle patterns with variable features and sizes by adjusting the surface wettability and printing speed. The spot sizes of cell-adhesive TMV mutant arrays were in the range of 50-150 μm diameter. Mouse PPCs were seeded on the TMV-RGD (arginine-glycine-aspartate)-patterned polystyrene (PS) substrate, which consists of areas that either favor (TMV-RGD) or prohibit (bare PS) cell adhesion. The PPCs stably attached, proliferated on top of the TMV-RGD support, thus resulting in the formation of uniform and confluent PPC clusters. Furthermore, the aggregated PPCs also maintained their multipotency and were positive for E-cadherin, indicating that the formation of cell-cell junctions is critical for enhanced cell-cell contact.

Sequence-specific nuclease-mediated release of cells tethered by oligonucleotide phospholipids

Single-stranded oligonucleotide-conjugated lipids (ssDNA-PEG-lipids) that associate with the cell membrane confer to the cell an artificial adhesive capability via sequence-specific hybridization to complementary oligonucleotides, forming bonds of double stranded oligonucleotides (dsDNA). Such artificial tethers permit surface patterning of cells or controlled formation of cellular aggregates. However, the hybridization responsible for tethering cells to surfaces or to other cells is not trivially reversed under physiological conditions. In this study, we approach the unbinding of tethered cells by cleaving dsDNA bonds with restriction endonuclease BamHI or digesting bonds with the nonspecific nuclease Benzonase. The procedure was applied to CCRF-CEM cells bearing dsDNA suspended in isolation, cells tethered to glass substrates, and cells aggregated heterotypically with other ssDNA-bearing cells. Cells liberated from surfaces with BamHI could be flushed from flow chambers and viably recovered while the majority of cells not bearing enzyme recognition sequences were retained on the surface, and DNA-tethered cells could be nonspecifically recovered viably from surfaces after Benzonase treatment. Heterotypic aggregates of cells joined by recognition sequence DNA could be dispersed with 10 min exposure to BamHI while undispersed cells heterotypically aggregated with a control sequence remained. Likewise, 10 min exposure to Benzonase was sufficient to disperse aggregates independently of sequence. The potential to undo artificially engineered DNA-mediated adhesion offers new possibilities in the controlled arrangement of cells relative to other cells and in the study of membrane biophysics.

Inkjet printing for pharmaceutics - A review of research and manufacturing

Global regulatory, manufacturing and consumer trends are driving a need for change in current pharmaceutical sector business models, with a specific focus on the inherently expensive research costs, high-risk capital-intensive scale-up and the traditional centralised batch manufacturing paradigm. New technologies, such as inkjet printing, are being explored to radically transform pharmaceutical production processing and the end-to-end supply chain. This review provides a brief summary of inkjet printing technologies and their current applications in manufacturing before examining the business context driving the exploration of inkjet printing in the pharmaceutical sector. We then examine the trends reported in the literature for pharmaceutical printing, followed by the scientific considerations and challenges facing the adoption of this technology. We demonstrate that research activities are highly diverse, targeting a broad range of pharmaceutical types and printing systems. To mitigate this complexity we show that by categorising findings in terms of targeted business models and Active Pharmaceutical Ingredient (API) chemistry we have a more coherent approach to comparing research findings and can drive efficient translation of a chosen drug to inkjet manufacturing.

Cell patterning on polylactic acid through surface-tethered oligonucleotides

Polylactic acid (PLA) is a candidate material to prepare scaffolds for 3-D tissue regeneration. However, cells do not adhere or proliferate well on the surface of PLA because it is hydrophobic. We report a simple and rapid method for inducing cell adhesion to PLA through DNA hybridization. Single-stranded DNA (ssDNA) conjugated to poly(ethylene glycol) (PEG) and to a terminal phospholipid (ssDNA-PEG-lipid) was used for cell surface modification. Through DNA hybridization, modified cells were able to attach to PLA surfaces modified with complementary sequence (ssDNA'). Different cell types can be attached to PLA fibers and films in a spatially controlled manner by using ssDNAs with different sequences. In addition, they proliferate well in a culture medium supplemented with fetal bovine serum. The coexisting modes of cell adhesion through DNA hybridization and natural cytoskeletal adhesion machinery revealed no serious effects on cell growth. The combination of a 3-D scaffold made of PLA and cell immobilization on the PLA scaffold through DNA hybridization will be useful for the preparation of 3-D tissue and organs.

Photoactivated bioconjugation between ortho-azidophenols and anilines: a facile approach to biomolecular photopatterning

Methods for the surface patterning of small molecules and biomolecules can yield useful platforms for drug screening, synthetic biology applications, diagnostics, and the immobilization of live cells. However, new techniques are needed to achieve the ease, feature sizes, reliability, and patterning speed necessary for widespread adoption. Herein, we report an easily accessible and operationally simple photoinitiated reaction that can achieve patterned bioconjugation in a highly chemoselective manner. The reaction involves the photolysis of 2-azidophenols to generate iminoquinone intermediates that couple rapidly to aniline groups. We demonstrate the broad functional group compatibility of this reaction for the modification of proteins, polymers, oligonucleotides, peptides, and small molecules. As a specific application, the reaction was adapted for the photolithographic patterning of azidophenol DNA on aniline glass substrates. The presence of the DNA was confirmed by the ability of the surface to capture living cells bearing the sequence complement on their cell walls or cytoplasmic membranes. Compared to other light-based DNA patterning methods, this reaction offers higher speed and does not require the use of a photoresist or other blocking material.

A review of microfabrication and hydrogel engineering for micro-organs on chips

This review highlights recent trends towards the development of in vitro multicellular systems with definite architectures, or "organs on chips". First, the chemical composition and mechanical properties of the scaffold have to be consistent with the anatomical environment in vivo. In this perspective, the flourishing interest in hydrogels as cellular substrates has highlighted the main parameters directing cell differentiation that need to be recapitulated in artificial matrix. Another scaffold requirement is to act as a template to guide tissue morphogenesis. Therefore specific microfabrication techniques are required to spatially pattern the environment at microscale. 2D patterning is particularly efficient for organizing planar polarized cell types such as endothelial cells or neurons. However, most organs are characterized by specific sub units organized in three dimensions at the cellular level. The reproduction of such 3D patterns in vitro is necessary for cells to fully differentiate, assemble and coordinate to form a coherent micro-tissue. These physiological microstructures are often integrated in microfluidic devices whose controlled environments provide the cell culture with more life-like conditions than traditional cell culture methods. Such systems have a wide range of applications, for fundamental research, as tools to accelerate drug development and testing, and finally, for regenerative medicine.

Long term culture of cells patterned on glass via membrane-tethered oligonucleotides

Oligonucleotide-based membrane inserts can be used as tethers to control attachment of cells to patterned surfaces without interfering with internal cytoskeletal modes of adhesion. Such control can be employed as a means for study of cell-cell interactions or side-by-side co-culture of different cell types without separation/sorting. While there is utility for cell patterning methods decoupled from natural cytoskeletal mechanisms, the consequences of maintaining this artificially induced state of attachment remains unexplored. We present a method for the 2-dimensional patterning of cells via hybridization of membrane-tethered single stranded oligonucleotides to complimentary single stranded oligonucleotides bound to optically transparent glass substrates which allowed us to characterize the long term culture of patterned HEK293 cells. Patterned substrates immersed in FBS-containing media are shown to permit the adsorption of adhesive serum proteins which allowed for the spreading and engagement of natural cytoskeletal adhesion modes in cells initially attached only through DNA hybridization. We show that the coexisting modes of attachment result in competition between membrane-bound tethers and natural cytoskeletal adhesion machinery as cells attempt to migrate away from their initial points of attachment. This competition ends in the escape of cells from their designated patterns and the 'winning out' of cytoskeletal migration forces over the affinity of lipid inserts for the cell membrane.