Iodinated trihalomethanes formation in iopamidol-contained water during ferrate/chlor(am)ination treatment

Removal of Iodine-Containing X-ray Contrast Media from Environment: The Challenge of a Total Mineralization

Iodinated X-ray contrast media (ICM) as emerging micropollutants have attracted considerable attention in recent years due to their high detected concentration in water systems. It results in environmental issues partly due to the formation of toxic by-products during the disinfection process in water treatment. Consequently, various approaches have been investigated by researchers in order to achieve ICM total mineralization. This review discusses the different methods that have been used to degrade them, with special attention to the mineralization yield and to the nature of formed by-products. The problem of pollution by ICM is discussed in the first part dedicated to the presence of ICM in the environment and its consequences. In the second part, the processes for ICM treatment including biological treatment, advanced oxidation/reductive processes, and coupled processes are reviewed in detail. The main results and mechanisms involved in each approach are described, and by-products identified during the different treatments are listed. Moreover, based on their efficiency and their cost-effectiveness, the prospects and process developments of ICM treatment are discussed.

Efficient degradation and deiodination of iopamidol by UV/sulfite process: Assessment of typical process parameters and transformation paths

Iopamidol (IPM) is widely used in medical clinical examination and treatment and has immeasurable harm to the ecological environment. The combination of UV and sulfite (UV/sulfite) process was developed to degrade IPM in this study. In contrast to that almost no removal of IPM was observed under sulfite reduction alone, the UV/sulfite process could efficiently reductively degrade IPM with the observed rate constant (k_obs) of 2.08 min^-1, which was nearly 4 times that of UV irradiation alone. The major active species in the UV/sulfite process were identified as hydrated electrons (e_aq^-) by employing active species scavengers. The influence of the initial pH, sulfite dosage, IPM concentration, UV intensity and common water matrix were evaluated. The degradation of IPM reached nearly 100% within only 2.5 min at pH 9, and k_obs increased at higher initial sulfite dosages and greater UV intensities. HCO₃^- had a limited effect on the degradation of IPM, while humic acid (HA) was found to be a strong inhibitor in the UV/sulfite process. With the synergistic action of UV/sulfite, most of the iodine in IPM was found to release in the form of iodide ions (up to approximately 98%), and a few formed iodide-containing organic compounds, reducing significantly the toxicity of degradation products. Under direct UV irradiation and free radical reduction (mainly e_aq^-), 15 transformation intermediates of IPM were produced by amide hydrolysis, deiodination, hydroxyl radical addition and hydrogen abstraction reactions, in which free radical attack accounted for the main part. Consequently, the UV/sulfite process has a strong potential for IPM degradation in aquatic environments.

Degradation of iopamidol by UV365/NaClO: Roles of reactive species, degradation mechanism, and toxicology

The degradation of iopamidol (IPM) was investigated using a UV₃₆₅/NaClO system. The reactive species (HO·, ClO·, ozone, Cl·, and Cl₂^-·) in the system were identified, and the changing trends of the percentage contributions of these reactive species to IPM removal under various conditions were systematically evaluated. The results showed that ClO· and HO· played the most significant roles in the apparent pseudo-first-order rate constants of IPM degradation (k_obs, min^-1) in the control experiment, and their percentage contributions to k_obs were 41.31% and 34.45%, respectively. In addition, Cl· and Cl₂^-· together contributed 22% to the k_obs. Furthermore, the contribution of ozone to the IPM removal could be neglected. The concentrations of these species increased significantly when the concentration of NaClO was increased from 50 µM to 200 µM, while the percentage contribution of ClO· to k_obs was greatly increased. The concentrations and percentage contributions of HO· and ClO· decreased significantly as the solution pH increased from 5 to 9, with Cl₂^-· playing a greater role in the degradation of IPM under alkaline conditions. While Cl^- or HCO₃^-/CO₃^2- significantly promoted the generation of Cl₂^-· or CO₃^-·, neither had an obvious effect on k_obs, suggesting that Cl₂^-· and CO₃^-· should have a certain reactivity with IPM. Compared with that of Cl₂^-·, the percentage contribution of ClO· and Cl· to k_obs was more likely to be inhibited by NOM. In addition, the organic and inorganic oxidation products of IPM were detected. The oxidation mechanisms of IPM degradation in the UV₃₆₅/NaClO system, such as the H-extraction reaction, deiodination, substitution reaction, amide hydrolysis, and amine oxidation, were proposed according to the obtained 15 organic products. No effect on acute toxicity towards Vibrio fischeri and Photobacterium phosphoreum was detected during the oxidation of IPM by the UV₃₆₅/NaClO system. Furthermore, the engineering feasibility of the oxidation system was demonstrated, by the effective degradation of IPM in actual water. However, HOI rapidly accumulated during the removal of IPM in the UV₃₆₅/NaClO system, which poses certain environmental risks and will needs to be investigated.