Efficient catalytic activity of BiVO4 nanostructures by crystal facet regulation for environmental remediation

Facile construction of multifunctional xNiCo2O4/BiVO4 heterojunction with accelerated charge transfer for efficient photocatalytic treatment of Cr (VI), MB and TC under visible light

The release of industrial effluents, comprising of organic dyes, antibiotics, and heavy metals poses substantial environmental and ecological threats. Among the different approaches, the utilization of heterogeneous photocatalysis based on semiconducting metal oxides is of paramount important to removal of organic ( MB dye and TC antibiotic) and inorganic pollutants ( Cr (VI) ) in wastewater. In this work, a new approach for creating type-II heterojunction photocatalysts named xNiCo2O4/BiVO4 or BNC is suggested. The as-prepared samples were thoroughly examined by means of several sophisticated analytical tools to investigate their physicochemical properties. These composites were utilized in the decomposition of MB dye, TC drug and the reduction of Cr (VI) under visible light irradiation. According to the findings, the creation of type-II heterojunction at BiVO4-NiCo2O4 interface greatly improved charge transportation while successfully preventing electron-hole recombination. Among the various composites studied, BNC-2 demonstrated an enhanced photocatalytic activity towards degradation of MB and TC, which were found to be 91 % over a period of 150 min and 95 % within only 60 min, respectively. Moreover, the photocatalytic reduction of Cr (VI) was accomplished 96 % within just 25 min. Additionally, it is discovered that BNC-2 displayed promising photostability and recyclability with a retention of >90 % after five consecutive cycles. The enhanced photocatalytic activity of BNC-2 is evidently attributed to the expedited separation and transfer of charges, as proven by photocurrent measurement, photoluminescence and electrochemical impedance spectroscopy analyses. Hence, the current amalgamation of NiCo2O4 and BiVO4 heterojunction composite has paved novel paths towards photocatalytic removal of organic as well as inorganic contaminants.

A Meta-Analysis of Influencing Factors on the Activity of BiVO4-Based Photocatalysts

With the continuous advancement of global industrialization, a large amount of organic and inorganic pollutants have been discharged into the environment, which is essential for human survival. Consequently, the issue of water environment pollution has become increasingly severe. Photocatalytic technology is widely used to degrade water pollutants due to its strong oxidizing performance and non-polluting characteristics, and BiVO4-based photocatalysts are one of the ideal raw materials for photocatalytic reactions. However, a comprehensive global analysis of the factors influencing the photocatalytic performance of BiVO4-based photocatalysts is currently lacking. Here, we performed a meta-analysis to investigate the differences in specific surface area, kinetic constants, and the pollutant degradation performance of BiVO4-based photocatalysts under different preparation and degradation conditions. It was found that under the loading condition, all the performances of the photocatalysts can be attributed to the single BiVO4 photocatalyst. Moreover, loading could lead to an increase in the specific surface area of the material, thereby providing more adsorption sites for photocatalysis and ultimately enhancing the photocatalytic performance. Overall, the construct heterojunction and loaded nanomaterials exhibit a superior performance for BiVO4-based photocatalysts with 136.4% and 90.1% improvement, respectively. Additionally, within a certain range, the photocatalytic performance increases with the reaction time and temperature.

2D defect-engineered Ag-doped γ-Fe2O3/BiVO4: The effect of noble metal doping and oxygen vacancies on exciton-triggering photocatalysis production of singlet oxygen

The selectivity of singlet oxygen (1O2) holds promising applications in complex environmental systems due to its ability to preferentially oxidize target pollutants. Usually, 1O2 in photocatalytic systems is generated via the electron transfer pathway and •O2- plays an important role as an intermediate, while the exciton-based energy transfer pathway for 1O2 generation has been less studied. Here, a 2D Ag-γ-Fe2O3/BiVO4 with oxygen vacancies was designed which was capable of generating 1O2 by an exciton-based energy transfer-dominated approach, as strongly demonstrated by the results of steady-state fluorescence spectroscopy and phosphorescence spectroscopy. In the Z-type heterojunction photocatalyst system, Ag acted as an electron mediator to promote not only the generation of free carriers but also the generation of singlet excitons, while the appropriate concentration of oxygen vacancies further promotes the exciton-triggering photocatalysis production of 1O2. The Ag-γ-Fe2O3/BiVO4 could degrade 99.4% of sulfadiazine within 90 min, and 1O2 played an important role in the degradation of sulfadiazine, as shown by EPR and active species capture experiments. Ecotoxicity predictions indicated that the main byproducts of sulfadiazine degradation by Ag-γ-Fe2O3/BiVO4 were low in toxicity. The prepared photocatalysts provide a new idea for obtaining 1O2 and designing photocatalysts with selectivity.

Boosted photocatalytic performance of OVs-rich BiVO4 hollow microsphere self-assembled with the assistance of SDBS

In this study, monoclinic phase bismuth vanadate (BiOV₄) photocatalyst with unique hollow microsphere morphology was successfully prepared by a hydrothermal method in the existence of sodium dodecyl benzene sulfonate (SDBS). The prepared photocatalysts were characterized by X-ray diffraction (XRD), scanning electron (SEM) and X-ray photoelectron spectrometer (XPS) and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). Experimental results show that SDBS definitely changes the microstructure of BiVO₄, which is allocated to the template role of SDBS in the preparation process. Moreover, the hydrothermal treatment time is also of crucial importance in affecting the structure and morphology of the photocatalysts, and the optimal hydrothermal treatment time for the formation of hollow microsphere is 24 h. Furthermore, the feasible growth mechanism for hollow microsphere was elaborated. Enriched oxygen vacancies (OVs) are introduced into BiOV₄ prepared with SDBS, largely elevating the separation efficiency of photo-generated charges. Under visible light irradiation, the photocatalytic activities of BiOV₄ for destruction of rhodamine (RhB) were evaluated. The photocatalytic degradation rate constant of RhB on the 3SBVO is 2.23 times of that on the blank BiOV₄ as the mass ratio of SDBS/BiOV₄ is 3 %. Photocatalytic degradation mechanism of BiVO₄ toward detoxification of organic pollutants was presented.

Recent advances in structural engineering of photocatalysts for environmental remediation

Photocatalysis appears to be an appealing approach for environmental remediation including pollutants degradation in water, air, and/or soil, due to the utilization of renewable and sustainable source of energy, i.e., solar energy. However, their broad applications remain lagging due to the challenges in pollutant degradation efficiency, large-scale catalyst production, and stability. In recent decades, massive efforts have been devoted to advance the photocatalysis technology for improved environmental remediation. In this review, the latest progress in this aspect is overviewed, particularly, the strategies for improved light sensitivity, charge separation, and hybrid approaches. We also emphasize the low efficiency and poor stability issues with the current photocatalytic systems. Finally, we provide future suggestions to further enhance the photocatalyst performance and lower its large-scale production cost. This review aims to provide valuable insights into the fundamental science and technical engineering of photocatalysis in environmental remediation.

Enhanced Photoredox Activity of BiVO4/Prussian Blue Nanocomposites for Efficient Pollutant Removal from Aqueous Media under Low-Cost LEDs Illumination

Bismuth vanadate (BiVO4, BV) is a widely explored photocatalyst for photo(electro)chemical applications, but its full photocatalytic potential is hindered by the fast recombination and low mobility of photogenerated charge carriers. Herein, we propose the photodeposition of different amounts of Prussian blue (PB) cocatalysts on the surface of monoclinic BV to obtain BV-PB composite photocatalysts with increased photoactivity. The as-prepared BV and BV-PB composites were characterized by an array of analytic techniques such scanning eletron microscopy (SEM), transmission eletron microscopy (TEM), X-day diffraction (XRD), and spectroscopic techniques including Fourier-transform infrared spectroscopy (FTIR), diffuse reflectance spectroscopy (DRS), electrochemical impedance spectroscopy (EIS), photoluminescence (PL), and Raman spectroscopy. The addition of PB not only increases the absorption of visible light, as indicated by DRS, but also improves the charge carriers’ transfer across the photocatalysts/solution interface and hence reduces electron-hole (e−-h+) recombination, as confirmed by EIS and PL measurements. Resultantly, the BV-PB composite photocatalysts with optimum PB loading exhibited enhanced Cr(VI) photoreduction efficiency as compared to pristine BV under visible light illumination from low-power blue light-emitting diodes (LEDs), thanks to the cocatalyst role of PB which mediates the transfer of photoexcited conduction band (CB) electrons from BV to Cr(VI) species in solution. Moreover, as compared to pristine BV and BV + H2O2, a drastic increase in the methylene blue (MB) photo-oxidation efficiency was observed for BV-PB in the presence of a minute quantity of H2O2 due to a synergic effect between the photocatalytic and Fenton-like processes. While pure BV photodegraded around 70% of MB dye within 120 min, the BV-PB/H2O2 and BV/H2O2 system could degrade almost 100% of the dye within 20 min (kobs. = 0.375 min−1) and 40 min (kobs. = 0.055 min−1), respectively. The practical approach employed in this work may pioneer new prospects for synthesizing new BV-based photocatalytic systems with low production costs and high photoredox efficiencies.

Effect of water-oil ratio on the photocatalytic performance of visible light-active BiVO4 nanoparticles prepared by inverse microemulsion-calcination method

Nowadays, nano-photocatalysts (NPs) have become the research focus in the field of photocatalysis due to their excellent photocatalytic activity, and microemulsion is an effective method to prepare high-efficiency nano-photocatalysts. Here, BiVO₄ NPs with high efficiency under visible light were prepared by a combination of reverse microemulsion method and calcination method. XRD, SEM, TEM, XPS, DRS, PL, BET and other characterization tests were used to comprehensively explore the influence of water-oil ratio on the physicochemical properties of the catalysts. The results show that BiVO₄ NPs of monoclinic scheelite with high crystallization degree can be obtained by this method. The microscopic morphology, specific surface area and total pore volume of BiVO₄ NPs are significantly affected by the water-oil ratio. It is difficult to obtain BiVO₄ NPs with small particle size and uniform dispersion under the condition of too low or too high water-oil ratio. Meanwhile, the photogenerated carrier recombination efficiency of the catalyst is significantly improved, thus reducing the photocatalytic activity of the catalyst. Strikingly, the BiVO₄ NPs obtained under the condition of water-oil ratio is 20 exhibited well-dispersed nanospheres with diameters ranging from 80 to 100 nm. It has the highest photocatalytic activity due to its high crystallinity, large specific surface area and total pore volume and relatively low photogenerated carrier recombination efficiency. Under visible light irradiation, the degradation efficiency of RhB can reach 97.69% in 100 min, and the rate constant is 0.03253 min^-1.

Improved photoredox activity of the 2D Bi4Ti3O12–BiVO4–Bi4V2O10 heterostructure via the piezoelectricity-enhanced charge transfer effect

The formation of the 2D Bi4Ti3O12–BiVO4–Bi4V2O10 heterostructure and the piezoelectric effect on photoredox activity improvements.