Formation of environmentally persistent free radicals from photodegradation of triclosan by metal oxides/silica suspensions and particles

Photodegradation of biodegradable plastics in aquatic environments: Current understanding and challenges

Direct and indirect photolysis are important abiotic processes in aquatic environments through which plastics can be transformed physically and chemically. Transport of biodegradable plastics in water is influenced by vertical mixing and turbulent flow, which make biodegradable plastics remain susceptible to sunlight and photolysis despite their high density. In general, biodegradable plastics are composed of ester containing polymers (e.g., poly(butylene succinate), polyhydroxyalkanoate, and polylactic acid), whereas non-biodegradable plastics are composed of long chains of saturated aliphatic hydrocarbons in their backbones (e.g., polyethylene, polypropylene, and polystyrene). Based on the reviewed knowledge and discussion, we may hypothesize that 1) direct photolysis is more pronounced for non-biodegradation than for biodegradable plastics, 2) smaller plastics such as micro/nano-plastics are more prone to photodegradation and photo-transformation by direct and indirect photolysis, 3) the production rate of reactive oxygen species (ROS) on the surface of biodegradable plastics is higher than that of non-biodegradable plastics, 4) the photodegradation of biodegradable plastics may be promoted by ROS produced from biodegradable plastics themselves, and 5) the subsequent reactions of ROS are more active on biodegradable plastics than non-biodegradable plastics. Moreover, micro/nanoplastics derived from biodegradable plastics serve as more effective carriers of organic pollutants than those from non-biodegradable plastics and thus biodegradable plastics may not necessarily be more ecofriendly than non-biodegradable plastics. However, biodegradable plastics have been largely unexplored from the viewpoint of direct or indirect photolysis. Roles of reactive oxygen species originating from biodegradable plastics should be further explored for comprehensively understanding the photodegradation of biodegradable plastics.

Variations in life history parameters, population dynamics, and transcriptome regulation of Brachionus plicatilis exposed to triclosan

Triclosan (TCS) poses an ecological health risk due to its lipophilic nature, long half-life, and bioconcentration. To evaluate the toxicity of TCS on aquatic organisms, the life history parameters, population dynamics, and transcriptome regulation of Brachionus plicatilis exposed to TCS were investigated. In this study, the fecundity of rotifers was promoted by 25 μg/L of TCS and inhibited by higher concentrations (100 μg/L, 200 μg/L). The reproductive period of rotifers was shortened by 46.24 % but the post-reproductive period was prolonged by 176.47 % in 200 μg/L TCS. Both population growth and life table parameters indicated that a high concentration of TCS (200 μg/L) had negative impacts on population growth. Transcriptomic analysis showed that the effects of TCS on the life history parameters and population dynamics of rotifers were determined by regulating the expression of functional genes in cilium organization and cilium assembly and involved in pathways of focal adhesion.

Phototransformation of phosphite induced by zinc oxide nanoparticles (ZnO NPs) in aquatic environments

Phosphite, an essential component in the biogeochemical phosphorus cycle, may make significant contributions to the bioavailable phosphorus pool as well as water eutrophication. However, to date, the potential impacts of coexisting photochemically active substances on the environmental fate and transformation of phosphite in aquatic environments have been sparsely elucidated. In the present study, the effect of zinc oxide nanoparticles (ZnO NPs), a widely distributed photocatalyst in aquatic environments, on phosphite phototransformation under simulated solar irradiation was systematically investigated. The physicochemical characteristics of the pristine and reacted ZnO NPs were thoroughly characterized. The results showed that the presence of ZnO NPs induced the indirect phototransformation of phosphite to phosphate, and the reaction rate increased with increasing ZnO NPs concentration. Through experiments with quenching and trapping free radicals, it was proved that photogenerated reactive oxygen species (ROS), such as hydroxyl radical (•OH), superoxide anion (O2•-), and singlet oxygen (1O2), made substantial contributions to phosphite phototransformation. In addition, the influencing factors such as initial phosphite concentration, pH, water matrixes (Cl-, F-, Br-, SO42-, NO3-, NO2-, HCO3-, humic acid (HA) and citric acid (CA)) were investigated. The component of generated precipitates after the phosphite phototransformation induced by ZnO NPs was still dominated by ZnO NPs, while the presence of amorphous Zn3(PO4)2 was identified. This work explored ZnO NPs-mediated phosphite phototransformation processes, indicating that nanophotocatalysts released into aquatic environments such as ZnO NPs may function as photosensitizers to play a beneficial role in the transformation of phosphite to phosphate, thereby potentially mitigating the toxicity of phosphite to aquatic organisms while exacerbating eutrophication. The findings of this study provide a novel insight into the comprehensive assessment of the environmental fate, potential ecological risk, and biogeochemical behaviors of phosphite in natural aquatic environments under the condition of combined pollution.

Nanomaterials for Removal of Phenolic Derivatives from Water Systems: Progress and Future Outlooks

Environmental pollution remains one of the most challenging problems facing society worldwide. Much of the problem has been caused by human activities and increased usage of various useful chemical agents that inadvertently find their way into the environment. Triclosan (TCS) and related phenolic compounds and derivatives belong to one class of such chemical agents. In this work, we provide a mini review of these emerging pollutants and an outlook on the state-of-the-art in nanostructured adsorbents and photocatalysts, especially nanostructured materials, that are being developed to address the problems associated with these environmental pollutants worldwide. Of note, the unique properties, structures, and compositions of mesoporous nanomaterials for the removal and decontamination of phenolic compounds and derivatives are discussed. These materials have a great ability to scavenge, adsorb, and even photocatalyze the decomposition of these compounds to mitigate/prevent their possible harmful effects on the environment. By designing and synthesizing them using silica and titania, which are easier to produce, effective adsorbents and photocatalysts that can mitigate the problems caused by TCS and its related phenolic derivatives in the environment could be fabricated. These topics, along with the authors' remarks, are also discussed in this review.

Scientific and regulatory challenges of environmentally persistent free radicals: From formation theory to risk prevention strategies

EPFRs (Environmentally Persistent Free Radicals) are a class of pollutants that have been identified as potential environmental contaminants due to their persistence and ability to generate reactive oxygen species (ROS) that can cause oxidative stress in living organisms. However, no study has comprehensively summarized the production conditions, influencing factors and toxic mechanisms of EPFRs, impeding exposure toxicity assessments and risk prevention strategies. To bridge the gap between theoretical research and practical application, a thorough literature review to summarize the formation, environmental effects, and biotoxicity of EPFRs are conducted. A total of 470 relevant papers were screened in Web of Science Core collection databases. The transfer of electrons between interfaces and the cleavage of covalent bonds of persistent organic pollutants is crucial to the generation of EPFRs, which is induced by external sources of energy, including thermal energy, light energy, transition metal ions, and others. In the thermal system, the stable covalent bond of organic matter can be destroyed by heat energy at low temperature to form EPFRs, while the formed EPFRs can be destroyed at high temperature. Light can also accelerate the production of free radicals and promote the degradation of organic matter. The persistence and stability of EPFRs are synergistically influenced by individual environmental factors such as environmental humidity, oxygen content, organic matter content, and environmental pH. Studying the formation mechanism of EPFRs and their biotoxicity is essential for fully understanding the hazards posed by these emerging environmental contaminants.

Deciphering the photolysis products and biological concerns of triclosan under UVC and UVA

Triclosan (TCS) is omnipresent in the environment and has drawn increasing attention due to its potential adverse effects on human health. Direct photolysis of TCS readily occurs, especially in the surface layers of waters that receive abundant ultraviolet radiation during the daytime. However, biological concerns and the identification of toxic products during TCS photolysis have been explored limitedly. Therefore, in the present work, the structural characterization of the photolysis products by UVC and UVA were performed based on the mass spectra and fragmental ions. The results displayed that TCS was more readily eliminated by UVC than UVA, and the product species were completely different when TCS was degraded by UVC and UVA, respectively. Two products, m/z 235 and m/z 252, were produced via reductive dechlorination and nucleophilic substitution with UVC, while three dioxin-like isomer products were generated by dechlorination, cyclization and hydroxylation. Furthermore, the results of biological concerns suggested that the elimination of TCS did not represent the disappearance of biological risks. Specifically, more hazardous and photolysis products were formed during TCS photolysis with ultraviolets. For instance, the dioxin-like isomer products were highly microtoxic and genotoxic, and mildly antiestrogenic. The positive findings highlighted the biological concerns of TCS photolysis by ultraviolet radiation in the aquatic environment.

The overlooked formation of environmentally persistent free radicals on particulate matter collected from biomass burning under light irradiation

BACKGROUND

The illumination process may be an important contributor to environmentally persistent free radicals (EPFRs) in atmospheric particles, but the ability of light to generate EPFRs in combustion products remains unclear.

OBJECTIVE

This paper studies the characteristics and formation mechanism of EPFRs in combustion particles after photoexcitation.

METHOD

The secondary photochemical processes and the generation and decay capability of EPFRs in size-resolved (<10 µm) biomass combustion particles were analysed by electron paramagnetic resonance (EPR) spectroscopy.

RESULT

Our results indicated that secondary EPFRs can be generated after illumination and the produced EPFRs have a lifetime of approximately 1 day. The content of secondary EPFRs after light exposure increased by 20 %-30 % compared to that of the original EPFRs. Through the analysis of components of different polarities, it was found that non-extractable substances were the main contributors to secondary EPFRs (75 %), followed by extractable organics. This study showed that metal species and quinones are important precursors for the formation of secondary EPFRs from non-extractable and extractable PM components, respectively. We found that O₂ molecules are an important factor for the formation of secondary EPFRs from organic substances without oxygen functional groups.

CONCLUSIONS

This study presents information about the effects of light and O₂ on the generation of EPFRs, and the unstable nature of secondary EPFRs has important implications for assessing the health risks of atmospheric particles.

Fabrication of novel buckypaper metal oxide nano-catalysis glycerol carbonate/MWCNTs membrane for efficient removal of heavy metals

This study describes the fabrication of novel buckypaper membranes through the dispersion of multi-walled carbon nanotubes (MWCNTs) in the presence of surfactants metal oxide nano-catalysis Zinc oxide and magnesium oxide (ZnO and MgO) glycerol carbonate separately. Following vacuum filtration of the scattered solutions, self-supporting membranes known as buckypapers (BPs) were produced. The suggested membranes were employed for the efficient removal of heavy metals. The obtained data indicated that the incorporation of both glycerol carbonates prepared by two different nano metal oxides enhanced the permeability of MWCNTs membranes rejection efficiency. The characterization of the synthesized metal oxide nanoparticles, as well as the physicochemical and morphological properties of the membranes, were investigated. The rejection capabilities of membranes for the heavy metal ions were examined. Moreover, the suggested MWCNTs/ZnO nano-catalyst glycerol carbonate BP membrane displayed high rejection efficiency for heavy metals (Cd²⁺, Cu²⁺, Co²⁺, Ni²⁺, and Pb²⁺) than that prepared from the MgO nano-catalyst one.

Unexpected catalytic influence of atmospheric pollutants on the formation of environmentally persistent free radicals

Environmentally persistent free radicals (EPFRs) have been recognized as harmful and persistent environmental pollutants. In polluted regions, many acidic and basic atmospheric pollutants, which are present at high concentrations, may influence the extent of the formation of EPFRs. In the present paper, density functional theory (DFT) and ab-initio molecular dynamics (AIMD) calculations were performed to investigate the formation mechanisms of EPFRs with the influence of the acidic pollutants sulfuric acid (SA), nitric acid (NA), organic acid (OA), and the basic pollutants, ammonia (A), dimethylamine (DMA) on α-Al₂O₃ (0001) surface. Results indicate that both acidic and basic pollutants can enhance the formation of EPFRs by acting as "bridge" or "semi-bridge" roles by proceeding via a barrierless process. Acidic pollutants enhance the formation of EPFRs by first transferring its hydrogen atom to the α-Al₂O₃ surface and subsequently reacting with phenol to form an EPFR. In contrast, basic pollutants enhance the formation of EPFRs by first abstracting a hydrogen atom from phenol to form a phenoxy EPFR and eventually interacting with the α-Al₂O₃ surface. These new mechanistic insights will inform in understanding the abundant EPFRs in polluted regions with high mass concentrations of acidic and basic pollutants.

Enhanced transformation capability towards benzo(a)pyrene by Fe(III)-modified manganese oxides

Manganese oxides (Mn oxides) are ubiquitous and may coexist with Fe(III) ions in soil environments. In this study, acid birnessite, alkaline birnessite, cryptomelane, pyrolusite, manganite, and their Fe(III)-modified analogues were synthesized and used for benzo(a)pyrene transformation. Fe-modified Mn oxides show a markedly enhanced transformation capability towards benzo(a)pyrene. Specifically, the benzo(a)pyrene transformation rate constants k for Bir-H, Bir-OH, Cry, Pyr, and Man were 0.49, 0.080, 0.0071, 0.0055, and 0.0022 h^-1, respectively. After Fe(III) modification, the transformation rate constants were increased to 22, 2.7, 0.25, 0.0072 and 0.0098 h^-1, respectively. Fe(III)-modified layered birnessites exhibited better activity than Fe(III)-modified tunnel Mn oxides, which was attributed to their high Fe(III) contents and abundant active free radicals. Fe(III) was found to accept electrons from benzo(a)pyrene, thereby accelerating the benzo(a)pyrene transformation. Moreover, modification with Fe(III) increased the surface adsorbed water and oxygen, and promoted the generation of active free radicals. Finally, the physicochemical and biochemical properties of transformation products showed the environmental benefits of this process. Overall, the results indicate that the occurrence of Fe(III) ions could promote the removal of PAHs in Mn oxides-rich soils, and this study provides a credible understanding of PAH fates in natural soils.

Enhanced photocatalytic activities of a hierarchical ZnO/V2C MXene hybrid with a close coupling heterojunction for the degradation of methyl orange, phenol and methylene blue dye

A hierarchical ZnO/V2C MXene hybrid exhibited enhanced photocatalytic performance due to its close coupling heterojunction facilitating photo-generated carrier transfer.