Nano-fibrous scaffolds for tissue engineering

The influence of physical and spatial substrate characteristics on endothelial cells

Cardiovascular diseases are a main cause of death worldwide, leading to a growing demand for medical devices to treat this patient group. Central to the engineering of such devices is a good understanding of the biology and physics of cell-surface interactions. In existing blood-contacting devices, such as vascular grafts, the interaction between blood, cells, and material is one of the main limiting factors for their long-term durability. An improved understanding of the material's chemical- and physical properties as well as its structure all play a role in how endothelial cells interact with the material surface. This review provides an overview of how different surface structures influence endothelial cell responses and what is currently known about the underlying mechanisms that guide this behavior. The structures reviewed include decellularized matrices, electrospun fibers, pillars, pits, and grated surfaces.

A Novel Self-Pumping Janus Dressing for Promoting Wound Immunomodulation and Diabetic Wound Healing

Self-pumping dressings become one of the optimal solutions for the controlled management of chronic diabetic wound exudate and wound healing. However, present self-pumping dressings are not only prone to breakage of the loose hydrophobic layer but also have cumbersome and complicated preparation steps, which hinder the application of self-pumping dressings in diabetic wound treatment. Herein, a novel self-pumping structure of superabsorbent Janus dressing is designed to improve the strength of the hydrophobic layer and promote diabetic wound healing. The Janus dressing consists of a hydrophobic layer with a drainage agent (drainage layer) and a fluffy 3D nanofiber cotton (absorbent layer). Regardless of the thickness of the drainage layer, the drainage agent in the drainage layer provides the fluid to penetrate the drainage layer to the absorbent layer for unidirectional fluid draining. In design proof, the superabsorbent Janus dressing provides unidirectional drainage of inflammatory exudate and regulation of macrophage polarization, resulting in faster diabetic wound healing than single-layer dressings. Thus, the Janus dressing demonstrates important clinical implications to offer a novel design and preparation strategy for accelerating diabetic wound healing.

Development and Evaluation of Biodegradable Core-Shell Microfibrous and Nanofibrous Scaffolds for Tissue Engineering Applications

Tissue engineering scaffolds as three-dimensional substrates may serve as ideal templates for tissue regeneration by simulating the structure of the extracellular matrix (ECM). Many biodegradable synthetic polymers, either hydrophobic, like Poly-ε-caprolactone (PCL), or hydrophilic, like Poly(Vinyl Alcohol) (PVA), are widely used as candidate bioactive materials for fabricating tissue engineering scaffolds. However, a combination of good cytocompatibility of hydrophilic polymers with good biomechanical performance of hydrophobic polymers could be beneficial for the in vivo performance of the scaffolds. In this study, we aimed to fabricate biodegradable fibrous scaffolds by combining the properties of hydrophobic PCL with those of hydrophilic PVA and evaluate their properties in comparison with pristine PCL scaffolds. Therefore, single-layered PCL scaffolds, sequential tri-layered (PVA/PCL/PVA), and core-shell (PVA as shell and PCL as core) composite scaffolds were developed utilizing the electrospinning technique. The material structural and biomechanical properties of the electrospun scaffolds, before and after their hydrolytic degradation over a seven-month period following storage in phosphate-buffered saline (PBS) at 37 °C, were comprehensively compared. In addition, human embryonic kidney cells (HEK-293) were cultured on the scaffolds to investigate potential cell attachment, infiltration, and proliferation. The results demonstrated the long-term efficacy of core-shell biodegradable fibrous scaffolds in comparison to single-layers PCL and tri-layers PVA/PCL/PVA, not only due to its superior morphological characteristics and mechanical properties, but also due to its ability to promote homogeneous cell distribution and proliferation, without any external chemical or physical stimuli.

Biomaterials in Traumatic Brain Injury: Perspectives and Challenges

Traumatic brain injury (TBI) is a leading cause of mortality and long-term impairment globally. TBI has a dynamic pathology, encompassing a variety of metabolic and molecular events that occur in two phases: primary and secondary. A forceful external blow to the brain initiates the primary phase, followed by a secondary phase that involves the release of calcium ions (Ca2+) and the initiation of a cascade of inflammatory processes, including mitochondrial dysfunction, a rise in oxidative stress, activation of glial cells, and damage to the blood-brain barrier (BBB), resulting in paracellular leakage. Currently, there are no FDA-approved drugs for TBI, but existing approaches rely on delivering micro- and macromolecular treatments, which are constrained by the BBB, poor retention, off-target toxicity, and the complex pathology of TBI. Therefore, there is a demand for innovative and alternative therapeutics with effective delivery tactics for the diagnosis and treatment of TBI. Tissue engineering, which includes the use of biomaterials, is one such alternative approach. Biomaterials, such as hydrogels, including self-assembling peptides and electrospun nanofibers, can be used alone or in combination with neuronal stem cells to induce neurite outgrowth, the differentiation of human neural stem cells, and nerve gap bridging in TBI. This review examines the inclusion of biomaterials as potential treatments for TBI, including their types, synthesis, and mechanisms of action. This review also discusses the challenges faced by the use of biomaterials in TBI, including the development of biodegradable, biocompatible, and mechanically flexible biomaterials and, if combined with stem cells, the survival rate of the transplanted stem cells. A better understanding of the mechanisms and drawbacks of these novel therapeutic approaches will help to guide the design of future TBI therapies.

Advances in the Application of Photothermal Composite Scaffolds for Osteosarcoma Ablation and Bone Regeneration

Photothermal therapy is a promising approach to cancer treatment. The energy generated by the photothermal effect can effectively inhibit the growth of cancer cells without harming normal tissues, while the right amount of heat can also promote cell proliferation and accelerate tissue regeneration. Various nanomaterials have recently been used as photothermal agents (PTAs). The photothermal composite scaffolds can be obtained by introducing PTAs into bone tissue engineering (BTE) scaffolds, which produces a photothermal effect that can be used to ablate bone cancer with subsequent further use of the scaffold as a support to repair the bone defects created by ablation of osteosarcoma. Osteosarcoma is the most common among primary bone malignancies. However, a review of the efficacy of different types of photothermal composite scaffolds in osteosarcoma is lacking. This article first introduces the common PTAs, BTE materials, and preparation methods and then systematically summarizes the development of photothermal composite scaffolds. It would provide a useful reference for the combination of tumor therapy and tissue engineering in bone tumor-related diseases and complex diseases. It will also be valuable for advancing the clinical applications of photothermal composite scaffolds.

Overview of Electrospinning for Tissue Engineering Applications

Tissue engineering (TE) is an emerging field of study that incorporates the principles of biology, medicine, and engineering for designing biological substitutes to maintain, restore, or improve tissue functions with the goal of avoiding organ transplantation. Amongst the various scaffolding techniques, electrospinning is one of the most widely used techniques to synthesise a nanofibrous scaffold. Electrospinning as a potential tissue engineering scaffolding technique has attracted a great deal of interest and has been widely discussed in many studies. The high surface-to-volume ratio of nanofibres, coupled with their ability to fabricate scaffolds that may mimic extracellular matrices, facilitates cell migration, proliferation, adhesion, and differentiation. These are all very desirable properties for TE applications. However, despite its widespread use and distinct advantages, electrospun scaffolds suffer from two major practical limitations: poor cell penetration and poor load-bearing applications. Furthermore, electrospun scaffolds have low mechanical strength. Several solutions have been offered by various research groups to overcome these limitations. This review provides an overview of the electrospinning techniques used to synthesise nanofibres for TE applications. In addition, we describe current research on nanofibre fabrication and characterisation, including the main limitations of electrospinning and some possible solutions to overcome these limitations.

Transforming Wound Management: Nanomaterials and Their Clinical Impact

Wound healing is a complex process that can be further complicated in chronic wounds, leading to prolonged healing times, high healthcare costs, and potential patient morbidity. Nanotechnology has shown great promise in developing advanced wound dressings that promote wound healing and prevent infection. The review article presents a comprehensive search strategy that was applied to four databases, namely Scopus, Web of Science, PubMed, and Google Scholar, using specific keywords and inclusion/exclusion criteria to select a representative sample of 164 research articles published between 2001 and 2023. This review article provides an updated overview of the different types of nanomaterials used in wound dressings, including nanofibers, nanocomposites, silver-based nanoparticles, lipid nanoparticles, and polymeric nanoparticles. Several recent studies have shown the potential benefits of using nanomaterials in wound care, including the use of hydrogel/nano silver-based dressings in treating diabetic foot wounds, the use of copper oxide-infused dressings in difficult-to-treat wounds, and the use of chitosan nanofiber mats in burn dressings. Overall, developing nanomaterials in wound care has complemented nanotechnology in drug delivery systems, providing biocompatible and biodegradable nanomaterials that enhance wound healing and provide sustained drug release. Wound dressings are an effective and convenient method of wound care that can prevent wound contamination, support the injured area, control hemorrhaging, and reduce pain and inflammation. This review article provides valuable insights into the potential role of individual nanoformulations used in wound dressings in promoting wound healing and preventing infections, and serves as an excellent resource for clinicians, researchers, and patients seeking improved healing outcomes.

SAXS imaging reveals optimized osseointegration properties of bioengineered oriented 3D-PLGA/aCaP scaffolds in a critical size bone defect model

Healing large bone defects remains challenging in orthopedic surgery and is often associated with poor outcomes and complications. A major issue with bioengineered constructs is achieving a continuous interface between host bone and graft to enhance biological processes and mechanical stability. In this study, we have developed a new bioengineering strategy to produce oriented biocompatible 3D PLGA/aCaP nanocomposites with enhanced osseointegration. Decellularized scaffolds -containing only extracellular matrix- or scaffolds seeded with adipose-derived mesenchymal stromal cells were tested in a mouse model for critical size bone defects. In parallel to micro-CT analysis, SAXS tensor tomography and 2D scanning SAXS were employed to determine the 3D arrangement and nanostructure within the critical-sized bone. Both newly developed scaffold types, seeded with cells or decellularized, showed high osseointegration, higher bone quality, increased alignment of collagen fibers and optimal alignment and size of hydroxyapatite minerals.

3D Gelatin Microsphere Scaffolds Promote Functional Recovery after Spinal Cord Hemisection in Rats

Spinal cord injury (SCI) damages signal connections and conductions, with the result that neuronal circuits are disrupted leading to neural dysfunctions. Such injuries represent a serious and relatively common central nervous system condition and current treatments have limited success in the reconstruction of nerve connections in injured areas, especially where sizeable gaps are present. Biomaterial scaffolds have become an effective alternative to nerve transplantation in filling these gaps and provide the foundation for simulating the 3D structure of solid organs. However, there remain some limitations with the application of 3D bioprinting for preparation of biomaterial scaffolds. Here, the approach in constructing and testing mini-tissue building blocks and self-assembly, solid 3D gelatin microsphere (GM) scaffolds with multiple voids as based on the convenient preparation of gelatin microspheres by microfluidic devices is described. These 3D GM scaffolds demonstrate suitable biocompatibility, biodegradation, porosity, low preparation costs, and relative ease of production. Moreover, 3D GM scaffolds can effectively bridge injury gaps, establish nerve connections and signal transductions, mitigate inflammatory microenvironments, and reduce glial scar formation. Accordingly, these 3D GM scaffolds can serve as a novel and effective bridging method to promote nerve regeneration and reconstruction and thus recovery of nerve function after SCI.

Laponite-Gelatin Nanofibrous Microsphere Promoting Human Dental Follicle Stem Cells Attachment and Osteogenic Differentiation for Noninvasive Stem Cell Transplantation

Nanofibrous microspheres (NFM) are emerging as prominent next-generation biomimetic injectable scaffold system for stem cell delivery and different tissue regeneration where nanofibrous topography facilitates ECM-like stem cells niches. Addition of osteogenic bioactive nanosilicate platelets within NFM can provide osteoconductive cues to facilitate matrix mediated osteogenic differentiation of stem cells and enhance the efficiency of bone tissue regeneration. In this study, gelatin nanofibrous microspheres are prepared containing fluoride-doped laponite XL21 (LP) using the emulsion mediated thermal induce phase separation (TIPS) technique. Systematic studies are performed to understand the effect of physicochemical properties of biomimicking NFM alone and with different concentrations of LP on human dental follicle stem cells (hDFSCs), their cellular attachment, proliferation, and osteogenic differentiation. The study highlights the effect of LP nanosilicate with biomimicking nanofibrous injectable scaffold system aiding in enhancing stem cell differentiation under normal physiological conditions compared to NFM without LP. The laponite-NFM shows suitability as excellent injectable biomaterials system for stem cell attachment, proliferation and osteogenic differentiation for stem cell transplantation and bone tissue regeneration.

Fabrication and characterization of electrospun GelMA/PCL/CS nanofiber composites for wound dressing applications

In the present study, the effect of different ratios of GelMA concentration has been exhibited for wound dressing implementation by the electrospinning method using a new polymer combination of Gelatin methacrylate (GelMA)/Polycaprolactone (PCL)/Chitosan (CS). The nanofiber composites were fabricated due to their biocompatible, biodegradable, improved mechanical strength, low degradation rate, and hydrophilic nature to develop cell-mimicking, cell adhesion, proliferation, and differentiation. Different concentrations of GelMA were added to the PCL/CS solution as 5, 10, and 20 wt%, respectively, in the formic acid/acetic acid (7:3) solution. A photoinitiator was added to the solution for photo-crosslinking of GelMA. The influence of different solution concentrations (5, 10, and 20 wt%) on the structure’s nanofiber production and fiber morphology was examined. SEM micrographs revealed that varied GelMA concentrations resulted in suitable and stable nanofiber composites. The average diameter of nanofiber composites grows as the GelMA concentration rises. FTIR, DSC, tensile test, degradation, and swelling test were evaluated. The results demonstrated that high mechanical strength, hydrophilic properties, and a slow degradation rate were observed with the presence and increment of GelMA concentration within the nanofiber composites. The antibacterial potential of GelMA/PCL/CS nanofiber composites was evaluated against P. aeruginosa and S. aureus using a disc diffusion assay. In vitro cell culture research was conducted by seeding NIH 3T3 fibroblast cells on nanofiber composites, proving these cells’ high cell proliferation rate, viability, and adhesion. 10 wt% GelMA-based nanofiber composites were found to have great potential for wound dressing applications.

Effective BMP-2 Release and Mineralization on a Graphene Oxide/Polyvinylpyrrolidone Hydrogel Forming Poly (ε-Caprolactone) Nanofibrous Scaffolds

PCL nanofibrous scaffolds are widely used as bone scaffolds, and they can increase the efficiency of bone regeneration by loading drugs and/or growth factors onto them. However, to obtain a more effective bone regeneration effect, it is necessary to increase drug loading and release efficiency. In this study, conductive hydrogel forming nanofibrous scaffolds were prepared to increase drug efficiency. GO has an excellent conductivity and biocompatibility, making it an efficient conductive polymer for bone differentiation. Electrospun PCL was immersed in a mixed solution of GO and PVP and then crosslinked using gamma-ray irradiation. It was confirmed that GO/PVP-PCL was successfully prepared through its characterization (morphology, thermal, chemical, electrical, and biological properties). In addition, drug-release efficiency was confirmed by electrical stimulation after loading the sample with BMP-2, a bone-regeneration growth factor. Compared to PCL, it was confirmed that GO/PVP-PCL has an approximately 20% improved drug-release efficiency and an excellent mineralization of the scaffolds using SBF. After culturing MG63 cells on GO/PVP-PCL, a high effect on osteodifferentiation was confirmed by ALP activity. Therefore, GO/PVP-PCL prepared by a gamma-ray-induced crosslinking reaction is expected to be used as biomaterial for bone-tissue engineering.

Scaffolds in the microbial resistant era: Fabrication, materials, properties and tissue engineering applications

Due to microbial infections dramatically affect cell survival and increase the risk of implant failure, scaffolds produced with antimicrobial materials are now much more likely to be successful. Multidrug-resistant infections without suitable prevention strategies are increasing at an alarming rate. The ability of cells to organize, develop, differentiate, produce a functioning extracellular matrix (ECM) and create new functional tissue can all be controlled by careful control of the extracellular microenvironment. This review covers the present state of advanced strategies to develop scaffolds with antimicrobial properties for bone, oral tissue, skin, muscle, nerve, trachea, cardiac and other tissue engineering applications. The review focuses on the development of antimicrobial scaffolds against bacteria and fungi using a wide range of materials, including polymers, biopolymers, glass, ceramics and antimicrobials agents such as antibiotics, antiseptics, antimicrobial polymers, peptides, metals, carbon nanomaterials, combinatorial strategies, and includes discussions on the antimicrobial mechanisms involved in these antimicrobial approaches. The toxicological aspects of these advanced scaffolds are also analyzed to ensure future technological transfer to clinics. The main antimicrobial methods of characterizing scaffolds’ antimicrobial and antibiofilm properties are described. The production methods of these porous supports, such as electrospinning, phase separation, gas foaming, the porogen method, polymerization in solution, fiber mesh coating, self-assembly, membrane lamination, freeze drying, 3D printing and bioprinting, among others, are also included in this article. These important advances in antimicrobial materials-based scaffolds for regenerative medicine offer many new promising avenues to the material design and tissue-engineering communities.

•

Antibacterial, antifungal and antibiofilm scaffolds.

•

Antimicrobial scaffold fabrication techniques.

•

Antimicrobial biomaterials for tissue engineering applications.

•

Antimicrobial characterization methods of scaffolds.

•

Bone, oral tissue, skin, muscle, nerve, trachea, cardiac, among other applications.

De novo testicular tissue generation from non-testicular cell lines, biologic and synthetic scaffolds: Current findings and future translational applications

In recent decades, reproductive science has revolutionized the options for biological parenthood for the 20-50% of infertility cases affected by male factors. However, current solutions exclude those who are infertile due to absent testicular tissue. This includes anorchic 46, XY individuals due to trauma or congenital factors and transgender men with a 46, XX genotype. There is a clinical need for methods to restore testicular function independent of pre-existing testicular tissue. This mini-review analyzes studies that have applied non-testicular cell lines to generate germline and non-germline testicular parenchymal components. While only 46, XY cell lines have been evaluated in this context to date, the potential for future application of cell lines from 46, XX individuals is also included. Additionally, the role of varied culture methods, media supplementation, and biologic and synthetic scaffolds to further support testicular parenchyma generation are critiqued. De novo testicular tissue generation in this manner will require a focus on both cellular and environmental aspects of tissue engineering. Put together, these studies highlight the future potential for expanded clinical, reproductive, and endocrine management options for individuals who are currently excluded from aspects of biologic reproduction most consistent with their gender identity and reproductive preferences.

Electrospun Biomimetic Nanofibrous Scaffolds: A Promising Prospect for Bone Tissue Engineering and Regenerative Medicine

Skeletal-related disorders such as arthritis, bone cancer, osteosarcoma, and osteoarthritis are among the most common reasons for mortality in humans at present. Nanostructured scaffolds have been discovered to be more efficient for bone regeneration than macro/micro-sized scaffolds because they sufficiently permit cell adhesion, proliferation, and chemical transformation. Nanofibrous scaffolds mimicking artificial extracellular matrices provide a natural environment for tissue regeneration owing to their large surface area, high porosity, and appreciable drug loading capacity. Here, we review recent progress and possible future prospective electrospun nanofibrous scaffolds for bone tissue engineering. Electrospun nanofibrous scaffolds have demonstrated promising potential in bone tissue regeneration using a variety of nanomaterials. This review focused on the crucial role of electrospun nanofibrous scaffolds in biological applications, including drug/growth factor delivery to bone tissue regeneration. Natural and synthetic polymeric nanofibrous scaffolds are extensively inspected to regenerate bone tissue. We focused mainly on the significant impact of nanofibrous composite scaffolds on cell adhesion and function, and different composites of organic/inorganic nanoparticles with nanofiber scaffolds. This analysis provides an overview of nanofibrous scaffold-based bone regeneration strategies; however, the same concepts can be applied to other organ and tissue regeneration tactics.

Polymer-mediated electrospun nanofibrous mats on supramolecular assembly of nortriptyline in the β-cyclodextrin medium for antibacterial study

With the thought and strong hope of uniqueness and challenging characteristic highlights and importance of nanofibrous mats (NFMs) along with cyclodextrins (CDs) that having a significant opportunity, chances and handling a vital role in hostile to bacterial activities. For the most part, CDs are utilized to upgrade the antibacterial activity through the improvement of solubility, stability, and etc., to any molecule which can bring inside the CDs cavity via the formation of inclusion complexes. Polymer-mediated electrospun nanofibrous mats (PAN NFMs) are utilized as a nanocarrier for antibacterial activity in this article, utilizing nortriptyline (NP) as a reference molecule. As a result, NP forms an inclusion complex with β-Cyclodextrin (β-CD). As a result, the PAN NFMs are able to absorb it, thereby consolidating the complex NP on the nanofibrous surface. Additionally, the soaking of PAN NFMs in NP solution without β-CD was performed for comparison. To characterize the nanofibrous mats of NP/PAN and NP:β-CD-ICs/PAN NFMs, UV absorption, FTIR, Raman, XRD, and SEM techniques were used. The antibacterial activity of NP and NP:β-CD-ICs have been tried against positive control antibiotics by the disc diffusion method. Thus, the action has been improved for NP:β-CD-ICs/PAN NFMs over NP/PAN NFMs because of the solubility upgraded for the NP by the complexation of β-CD.

Regulatory Effects of Gradient Microtopographies on Synapse Formation and Neurite Growth in Hippocampal Neurons

Among approaches aiming toward functional nervous system restoration, those implementing microfabrication techniques allow the manufacture of platforms with distinct geometry where neurons can develop and be guided to form patterned connections in vitro. The interplay between neuronal development and the microenvironment, shaped by the physical limitations, remains largely unknown. Therefore, it is crucial to have an efficient way to quantify neuronal morphological changes induced by physical or contact guidance of the microenvironment. In this study, we first devise and assess a method to prepare anisotropic, gradient poly(dimethylsiloxane) micro-ridge/groove arrays featuring variable local pattern width. We then demonstrate the ability of this single substrate to simultaneously profile the morphologcial and synaptic connectivity changes of primary cultured hippocampal neurons reacting to variable physical conditons, throughout neurodevelopment, in vitro. The gradient microtopography enhanced adhesion within microgrooves, increasing soma density with decreasing pattern width. Decreasing pattern width also reduced dendritic arborization and increased preferential axon growth. Finally, decreasing pattern geometry inhibited presynaptic puncta architecture. Collectively, a method to examine structural development and connectivity in response to physical stimuli is established, and potentially provides insight into microfabricated geometries which promote neural regeneration and repair.

Effects of Nanofiber Scaffolds Coated with Nanoparticulate and Microparticulate Freeze Dried Bone Allograft on the Morphology, Adhesion, and Proliferation of Human Mesenchymal Stem Cells

Background:

Freeze dried bone allograft nanoparticles on a nanofiber membrane may serve as an ideal scaffold for bone regeneration. This study aimed to assess the biological behavior of human MSCs in terms of proliferation and adhesion to nanoparticulate and microparticulate FDBA scaffolds on PLLA nanofiber membrane.

Methods:

In this experimental study, PLLA nanofiber scaffolds were synthesized by the electrospinning method. The FDBA nanoparticles were synthesized mechanically. The FDBA nanoparticles and microparticles were loaded on the surface of PLLA nanofiber membrane. A total of 64 scaffold samples in four groups of n-FDBA/PLLA, FDBA/PLLA, PLLA and control were placed in 24-well polystyrene tissue culture plates; 16 wells were allocated to each group. Data were analyzed using one-way ANOVA and Bonferroni test.

Results:

The proliferation rate of MSCs was significantly higher in the nanoparticulate group compared to the microparticulate group at five days (p = 0.034). Assessment of cell morphology at 24 hours revealed spindle-shaped cells with a higher number of appendages in the nanoparticulate group compared to other groups.

Conclusion:

MSCs on n-FDBA/PLLA scaffold were morphologically more active and flatter with a higher number of cellular appendages, as compared to FDBA/PLLA. It seems that the nanoparticulate scaffold is superior to the microparticulate scaffold in terms of proliferation, attachment, and morphology of MSCs in vitro.

Bi-layered nanofibrous membrane with osteogenic and antibacterial functions for periodontal tissue regeneration

Guided tissue regeneration (GTR) membranes have great potential to promote periodontal tissue regeneration and reestablishment. However, the regeneration potential and microbial infection resistance of current GTR membranes still need to be improved. Here, a bi-layered nanofibrous membrane on the basis of poly (lactic-co-glycolic acid) (PLGA)/gelatin with osteogenic and antibacterial functions was fabricated for periodontal tissue regeneration. The antimicrobial layer (AL) of the bi-layered nanofibrous membrane was composed of nanofibrous PLGA/gelatin nanofibers loaded with nano-silver (nAg), while the osteoconductive layer (OL) of the nanofibrous membrane consisted of PLGA/gelatin nanofibers loaded with nano-hydroxyapatite (nHA). The bi-layered nanofibrous membrane was examined by scanning electron microscopy (SEM), energy dispersive spectrometer (EDS), transmission electron microscope (TEM), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectrometry (XPS) and X-ray diffractometry (XRD). The results showed that nHA and nAg particles were well evenly loaded or embedded in PLGA/gelatin nanofibers. The cell culture experiments suggested that the bi-layered nanofibrous membrane possessed good cytocompatibility and the OL of the bi-layered nanofibrous membrane possessed an enhanced osteogenic capacity for human osteoblast-like cells (MG63), which was verified by the good cell viability and the increased alkaline phosphatase (ALP) activity, respectively. The results of in vitro antimicrobial study displayed that the AL of the bi-layered nanofibrous membrane possessed an effective antibacterial capability. In conclusion, the prepared bi-layered nanofibrous membrane with osteogenic and antibacterial functions may have great potential for periodontal tissue regeneration and reestablishment.[Formula: see text].

Multifunctional Membranes-A Versatile Approach for Emerging Pollutants Removal

This paper presents a comprehensive literature review surveying the most important polymer materials used for electrospinning processes and applied as membranes for the removal of emerging pollutants. Two types of processes integrate these membrane types: separation processes, where electrospun polymers act as a support for thin film composites (TFC), and adsorption as single or coupled processes (photo-catalysis, advanced oxidation, electrochemical), where a functionalization step is essential for the electrospun polymer to improve its properties. Emerging pollutants (EPs) released in the environment can be efficiently removed from water systems using electrospun membranes. The relevant results regarding removal efficiency, adsorption capacity, and the size and porosity of the membranes and fibers used for different EPs are described in detail.

A Review on Electrospun Nanofibers Based Advanced Applications: From Health Care to Energy Devices

Electrospun nanofibers have been exploited in multidisciplinary fields with numerous applications for decades. Owing to their interconnected ultrafine fibrous structure, high surface-to-volume ratio, tortuosity, permeability, and miniaturization ability along with the benefits of their lightweight, porous nanofibrous structure, they have been extensively utilized in various research fields for decades. Electrospun nanofiber technologies have paved unprecedented advancements with new innovations and discoveries in several fields of application including energy devices and biomedical and environmental appliances. This review article focused on providing a comprehensive overview related to the recent advancements in health care and energy devices while emphasizing on the importance and uniqueness of utilizing nanofibers. A brief description regarding the effect of electrospinning techniques, setup modifications, and parameters optimization on the nanofiber morphology was also provided. The article is concluded with a short discussion on current research challenges and future perspectives.

Electrospun regenerated silk fibroin is a promising biomaterial for the maintenance of inner ear progenitors in vitro

OBJECTIVE

We sought to determine the biocompatibility of electrospun regenerated silk fibroin (RSF) mats with inner ear progenitors, especially their effect on the differentiation of inner ear progenitors into hair cells.

METHODS

Neonatal mouse cochleae (n = 20) were collected and digested and allowed to form spheres over several days. Cells digested from the spheres were then seeded onto aligned or random RSF mats, with laminin-coated coverslips serving as controls. The inner ear progenitor cell mortality was examined by TUNEL labeling, and the adhesion of cells to the RSF mats or coverslip was determined by scanning electron microscopy. Finally, the number of hair cells that differentiated from inner ear progenitors was determined by Myosin7a expression. Unpaired Student's t-tests and one-way ANOVA followed by a Dunnett's multiple comparisons test were used in this study (p < 0.05).

RESULTS

After 5 days of culture, the inner ear progenitors had good adhesion to both the aligned and random RSF mats and there was no significant difference in TUNEL⁺ cells between the mats compared to the coverslip (p > 0.05). After 7 days of in vitro differentiation culture, the percentage of differentiated hair cells on the control, aligned, and random RSF mats was 2.5 ± 0.5%, 2.7 ± 0.4%, and 2.4 ± 0.2%, respectively, and there was no significant difference between Myosin7a⁺ cells on either RSF mat compared to controls (p > 0.05).

CONCLUSION

The aligned and random RSF mats had excellent biocompatibility with inner ear progenitors and helped the inner ear progenitors maintain their stemness. Our results thus indicate that RSF mats represent a useful scaffold for the development of new strategies for inner ear tissue engineering research.

Research progress, models and simulation of electrospinning technology: a review

In recent years, nanomaterials have aroused extensive research interest in the world's material science community. Electrospinning has the advantages of wide range of available raw materials, simple process, small fiber diameter and high porosity. Electrospinning as a nanomaterial preparation technology with obvious advantages has been studied, such as its influencing parameters, physical models and computer simulation. In this review, the influencing parameters, simulation and models of electrospinning technology are summarized. In addition, the progresses in applications of the technology in biomedicine, energy and catalysis are reported. This technology has many applications in many fields, such as electrospun polymers in various aspects of biomedical engineering. The latest achievements in recent years are summarized, and the existing problems and development trends are analyzed and discussed.

Long-term maintenance of functional primary human hepatocytes in 3D gelatin matrices produced by solution blow spinning

Solution blow spinning (SBS) has recently emerged as a novel method that can produce nano- and microfiber structures suitable for tissue engineering. Gelatin is an excellent precursor for SBS as it is derived mainly from collagens that are abundant in natural extracellular matrices. Here we report, for the first time the successful generation of 3D thermally crosslinked preforms by using SBS from porcine gelatin. These SBS mats were shown to have three-dimensional fibrous porous structure similar to that of mammalian tissue extracellular matrix. In pharma industry, there is an urgent need for adequate 3D liver tissue models that could be used in high throughput setting for drug screening and to assess drug induced liver injury. We used SBS mats as culturing substrates for human hepatocytes to create an array of 3D human liver tissue equivalents in 96-well format. The SBS mats were highly cytocompatible, facilitated the induction of hepatocyte specific CYP gene expression in response to common medications, and supported the maintenance of hepatocyte differentiation and polarization status in long term cultures for more than 3 weeks. Together, our results show that SBS-generated gelatin scaffolds are a simple and efficient platform for use in vitro for drug testing applications.

In Vitro Strategies to Vascularize 3D Physiologically Relevant Models

Vascularization of 3D models represents a major challenge of tissue engineering and a key prerequisite for their clinical and industrial application. The use of prevascularized models built from dedicated materials could solve some of the actual limitations, such as suboptimal integration of the bioconstructs within the host tissue, and would provide more in vivo-like perfusable tissue and organ-specific platforms. In the last decade, the fabrication of vascularized physiologically relevant 3D constructs has been attempted by numerous tissue engineering strategies, which are classified here in microfluidic technology, 3D coculture models, namely, spheroids and organoids, and biofabrication. In this review, the recent advancements in prevascularization techniques and the increasing use of natural and synthetic materials to build physiological organ-specific models are discussed. Current drawbacks of each technology, future perspectives, and translation of vascularized tissue constructs toward clinics, pharmaceutical field, and industry are also presented. By combining complementary strategies, these models are envisioned to be successfully used for regenerative medicine and drug development in a near future.

Tissue-engineered nerve graft using silk-fibroin/polycaprolactone fibrous mats decorated with bioactive cerium oxide nanoparticles

The main aim of this study was to evaluate the efficacy of cerium oxide nanoparticles (CNPs) encapsulated in fabricated hybrid silk-fibroin (SF)/polycaprolactone (PCL) nanofibers as an artificial neural guidance conduit (NGC) applicable for peripheral nerve regeneration. The NGC was prepared by PCL and SF filled with CNPs. The mechanical properties, contact angle, and cell biocompatibility experiments showed that the optimized concentration of CNPs inside SF and SF/PCL wall of conduits was 1% (wt/wt). The SEM image analysis showed the nanoscale texture of the scaffold in different topologies depend on composition with fiber diameters at about 351 ± 54 nm and 420 ± 73 nm respectively for CNPs + SF and CNPs + SF/PCL fibrous mats. Furthermore, contact angle measurement confirmed the hydrophilic behavior of the membranes, ascribable to the SF content and surface modification through modified methanol treatment. The balance of morphological and biochemical properties of hybrid CNPs 1% (wt/wt) + SF/PCL construct improves cell adhesion and proliferation in comparison with lower concentrations of CNPs in nanofibrous scaffolds. The release of CNPs 1% (wt/wt) from both CNPs + SF and CNPs+ SF/PCL fibrous mats was highly controlled and very slow during the extended time of incubation until 60 days. Fabricated double-layered NGC using CNPs + SF and CNPs + SF/PCL fibers was consistent for application in nervous tissue engineering and regenerative medicine from a structural and biocompatible perspective.

Design and characterization of keratin/PVA-PLA nanofibers containing hybrids of nanofibrillated chitosan/ZnO nanoparticles

In this paper, designing electrospun composite nanofibers containing poly (lactic acid) (PLA) and keratin/poly (vinyl alcohol) (K/PVA) as the major components and natural nanofibrillated chitosan (CHNF)/ZnO nanoparticles (ZnONPs) (CSZ) combination as the nanofiller ingredient, has been investigated. PLA solution from one syringe and K/PVA from another one with incorporation of CHNF (CS), CSZ (2:1), (1:1) and (1:2) were electrospun and produced nanofibers were formed on the rotating collector. Addition of CHNF and ZnONPs amounts in CSZ combination resulted in reduction of the diameter of nanofibers. The highest hydrophilicity was reported for K/PVA/CS-PLA/CS sample with the contact angle of about 43 ± 3°. AFM results for K/PVA-PLA, K/PVA/CS-PLA/CS and K/PVA/CSZ(2:1)-PLA/CSZ(2:1), K/PVA/CSZ(1:2)-PLA/CSZ(1:2) samples indicated that the surface roughness factor for these nanofibers was about 708, 277, 378 and 658 nm, respectively. DSC analysis for K/PVA/CSZ(1:2)-PLA/CSZ(1:2) structure exhibited that the peaks related to the melting points of PLA and PVA shifted to higher temperatures. Overally, K/PVA/CSZ(2:1)-PLA/CSZ(2:1) nanofiber with diameter of 352.50 ± 31 nm, contact angle of 48 ± 3°, tensile strength of 0.96 ± 0.18 MPa is suggested as a proper wound healing scaffold that has highest antibacterial as well as potential to increase cell proliferation.

A Current Review on Drug Loaded Nanofibers: Interesting and Valuable Platform for Skin Cancer Treatment

BACKGROUND

Nanofibers are used in topical medication for various skin diseases like wound healing, skin cancer and others. Non-melanoma skin cancers (NMSCs) are the most widely distributed diseases in the world, of which 99% of people are affected by either basal cell carcinomas (BCCs) or squamous cell carcinomas (SCCs) of the skin. Skin malignancy is caused by direct sun exposure and regular application of unsafe restorative items on the skin.

OBJECTIVE

This review presents the use of nanofibers in skin cancer treatment and advances made in skin cancer treatment.

METHODS

There are various methods used in the production of nanofibers such as bicomponent extrusion, phase separation, template synthesis, drawing, electrospinning, and others. Electrospinning is the most widely used technique for nanofiber fabrication. The nanofibers are produced in nanometer size range and mostly used in medication because of their low thickness, large surface area per unit mass and porosity. Nanofibers are also used as drug delivery system for sustaining the action of drugs or medicaments.

RESULTS

Nanofibers enhance the permeation and availability of those drugs having low bioavailability and low permeability. Nanofibers increase the sustainability of the drugs up to 10 days.

CONCLUSION

Skin cancer is the abnormal growth of skin cells in the body influencing people of all colours and skin. In this review paper, the definition and production techniques of nanofibers and drugs used in skin cancer treatment and the relation between skin cancer and nanofiber are illustrated in detail. With the help of different techniques and drugs, the risk of non-melanoma skin cancer is reduced. Lay Summary: The risk of skin cancer and other skin problems is increasing day by day. In a previous study we found that the nanofibers are less used as a topical delivery system. We have studied the nanofibers as a drug delivery system in the treatment of skin cancer by using different drugs. According our study nanofibers are most useful in skin drug delivery and if the nanofiber, are merging with other drug delivery system like nanoparticles, it may maximize the output of drug into skin. The significance of this study is, to explain all information about nanofibers in skin cancer.

Donepezil hydrochloride as a novel inducer for osteogenic differentiation of mesenchymal stem cells on PLLA scaffolds in vitro

Over the past decades, bone defects caused by illness or trauma have been the most common traumatic injuries in humans and treatment of orthopedic infections has always been a serious challenge to experts in the world. In this project, poly L-lactic acid (PLLA) nanofibrous scaffolds were synthesized as a nontoxic, eco-friendly, and cost-effective scaffold by the electrospinning technique. Then, the impact of PLLA on the cell proliferation and osteogenic differentiation of human mesenchymal stem cells (hMSCs) was assayed in the presence and absence of donepezil hydrochloride (DH) which was prescribed in patients with Alzheimer's disease. Also, hMSCs were seeded on PLLA scaffold in the presence (PLLA-DH) and absence of 1 μg mL^-1 of DH under osteogenic induction media. Osteogenic differentiation of hMSCs was assessed by specific bone-related tests including alkaline phosphatase (ALP) activity, Alizarin red and von Kossa staining, calcium content assay. Also, Osteocalcin and osteopontin were evaluated as osteogenic proteins as well as ALP, osteonectin, osteocalcin, collagen type I (Col-I) and Runx2 as osteogenic genes via immunocytochemistry (ICC) and Real-time PCR analyses. The obtained data showed the higher ALP enzyme activity and biomineralization, more intensity during von Kossa staining as well as the increase in the expression rate of osteogenic related gene and protein markers in differentiated hMSCs on PLLA-DH. In conclusion, the present study revealed that the combination of PLLA scaffold with DH provides a scope to develop a suitable matrix in bone tissue engineering applications.

Challenges and strategies for in situ endothelialization and long-term lumen patency of vascular grafts

Vascular diseases are the most prevalent cause of ischemic necrosis of tissue and organ, which even result in dysfunction and death. Vascular regeneration or artificial vascular graft, as the conventional treatment modality, has received keen attentions. However, small-diameter (diameter < 4 mm) vascular grafts have a high risk of thrombosis and intimal hyperplasia (IH), which makes long-term lumen patency challengeable. Endothelial cells (ECs) form the inner endothelium layer, and are crucial for anti-coagulation and thrombogenesis. Thus, promoting in situ endothelialization in vascular graft remodeling takes top priority, which requires recruitment of endothelia progenitor cells (EPCs), migration, adhesion, proliferation and activation of EPCs and ECs. Chemotaxis aimed at ligands on EPC surface can be utilized for EPC homing, while nanofibrous structure, biocompatible surface and cell-capturing molecules on graft surface can be applied for cell adhesion. Moreover, cell orientation can be regulated by topography of scaffold, and cell bioactivity can be modulated by growth factors and therapeutic genes. Additionally, surface modification can also reduce thrombogenesis, and some drug release can inhibit IH. Considering the influence of macrophages on ECs and smooth muscle cells (SMCs), scaffolds loaded with drugs that can promote M2 polarization are alternative strategies. In conclusion, the advanced strategies for enhanced long-term lumen patency of vascular grafts are summarized in this review. Strategies for recruitment of EPCs, adhesion, proliferation and activation of EPCs and ECs, anti-thrombogenesis, anti-IH, and immunomodulation are discussed. Ideal vascular grafts with appropriate surface modification, loading and fabrication strategies are required in further studies.

Performance of Nano-Hydroxyapatite/Beta-Tricalcium Phosphate and Xenogenic Hydroxyapatite on Bone Regeneration in Rat Calvarial Defects: Histomorphometric, Immunohistochemical and Ultrastructural Analysis

Background

Synthetic biomaterials have played an increasingly prominent role in the substitution of naturally derived biomaterials in current surgery practice. In vitro and in vivo characterization studies of new synthetic biomaterials are essential to analyze their physicochemical properties and the underlying mechanisms associated with the modulation of the inflammatory process and bone healing.

Purpose

This study compares the in vivo tissue behavior of a synthetic biomaterial nano-hydroxyapatite/beta-tricalcium phosphate (nano-HA/ß-TCP mixture) and deproteinized bovine bone mineral (DBBM) in a rat calvarial defect model. The innovation of this work is in the comparative analysis of the effect of new synthetic and commercially xenogenic biomaterials on the inflammatory response, bone matrix gain, and stimulation of osteoclastogenesis and osteoblastogenesis.

Methods

Both biomaterials were inserted in rat defects. The animals were divided into three groups, in which calvarial defects were filled with xenogenic biomaterials (group 1) and synthetic biomaterials (group 2), or left unfilled (group 3, controls). Sixty days after calvarial bone defects filled with biomaterials, periodic acid Schiff (PAS) and Masson’s trichrome staining, immunohistochemistry tumor necrosis factor-alpha (TNF-α), matrix metalloproteinase-9 (MMP-9), and electron microscopy analyses were conducted.

Results

Histomorphometric analysis revealed powerful effects such as a higher amount of proteinaceous matrix and higher levels of TNF-α and MMP-9 in bone defects treated with alloplastic nano-HA/ß-TCP mixture than xenogenicxenogic biomaterial, as well as collagen-proteinaceous material in association with hydroxyapatite crystalloids.

Conclusion

These data indicate that the synthetic nano-HA/ß-TCP mixture enhanced bone formation/remodeling in rat calvarial bone defects. The nano-HA/ß-TCP did not present risks of cross-infection/disease transmission. The synthetic nano-hydroxyapatite/beta-tricalcium phosphate mixture presented adequate properties for guided bone regeneration and guided tissue regeneration for dental surgical procedures.

Functional Bionanocomposite Fibers of Chitosan Filled with Cellulose Nanofibers Obtained by Gel Spinning

Extremely high mechanical performance spun bionanocomposite fibers of chitosan (CHI), and cellulose nanofibers (CNFs) were successfully achieved by gel spinning of CHI aqueous viscous formulations filled with CNFs. The microstructural characterization of the fibers by X-ray diffraction revealed the crystallization of the CHI polymer chains into anhydrous chitosan allomorph. The spinning process combining acidic-basic-neutralization-stretching-drying steps allowed obtaining CHI/CNF composite fibers of high crystallinity, with enhanced effect at incorporating the CNFs. Chitosan crystallization seems to be promoted by the presence of cellulose nanofibers, serving as nucleation sites for the growing of CHI crystals. Moreover, the preferential orientation of both CNFs and CHI crystals along the spun fiber direction was revealed in the two-dimensional X-ray diffraction patterns. By increasing the CNF amount up to the optimum concentration of 0.4 wt % in the viscous CHI/CNF collodion, Young's modulus of the spun fibers significantly increased up to 8 GPa. Similarly, the stress at break and the yield stress drastically increased from 115 to 163 MPa, and from 67 to 119 MPa, respectively, by adding only 0.4 wt % of CNFs into a collodion solution containing 4 wt % of chitosan. The toughness of the CHI-based fibers thereby increased from 5 to 9 MJ.m^-3. For higher CNFs contents like 0.5 wt %, the high mechanical performance of the CHI/CNF composite fibers was still observed, but with a slight worsening of the mechanical parameters, which may be related to a minor disruption of the CHI matrix hydrogel network constituting the collodion and gel fiber, as precursor state for the dry fiber formation. Finally, the rheological behavior observed for the different CHI/CNF viscous collodions and the obtained structural, thermal and mechanical properties results revealed an optimum matrix/filler compatibility and interface when adding 0.4 wt % of nanofibrillated cellulose (CNF) into 4 wt % CHI formulations, yielding functional bionanocomposite fibers of outstanding mechanical properties.

Investigation of Vasculogenesis Inducing Biphasic Scaffolds for Bone Tissue Engineering

Vascularization is the main obstacle for the bone tissue engineering strategies since the defect size is generally large. Incorporation of angiogenic factors is one of the strategies employed in order to accelerate vascularization and improve bone healing. In this study, a biphasic scaffold consisting of fibrous poly(lactide-co-glycolide) (PLGA) and poly(lactide-co-glycolide)-block-poly(ethylene glycol)-block-poly(lactide-co-glycolide) (PLGA-PEG-PLGA) hydrogel loaded with vascular endothelial growth factor-A (VEGF) inducer, GS4012, was constructed. Mesenchymal stem cells isolated from rat bone marrow (rBMSCs) were used for differentiation into osteogenic cells, and endothelial cells isolated from rat peripheral blood (rPBECs) were used to test the in vitro endothelial cell recruitment. The biphasic scaffold was tested for cell proliferation, ALP expression, VEGF induction, expression of osteogenic genes by rBMSCs, and recruitment of rPBECs in vitro and for improved bone healing and vascularization in vivo on critical size rat cranial defects. Endothelial migration through porous insert and VEGF induction were obtained in vitro in response to GS4012 as well as the upregulation of ALP, Runx2, Col I, and OC gene expressions. The biphasic scaffold was also shown to be effective in improving endothelial cell recruitment, vascularization, and bone healing in vivo. Thus, the proposed design has a great potential for the healing of critical size bone defect in tissue engineering studies according to both in vitro and in vivo investigations.

Innovative Strategies in Tendon Tissue Engineering

The tendon is a highly aligned connective tissue that transmits force from muscle to bone. Each year, more than 32 million tendon injuries have been reported, in fact, tendinopathies represent at least 50% of all sports injuries, and their incidence rates have increased in recent decades due to the aging population. Current clinical grafts used in tendon treatment are subject to several restrictions and there is a significant demand for alternative engineered tissue. For this reason, innovative strategies need to be explored. Tendon replacement and regeneration are complex since scaffolds need to guarantee an adequate hierarchical structured morphology and mechanical properties to stand the load. Moreover, to guide cell proliferation and growth, scaffolds should provide a fibrous network that mimics the collagen arrangement of the extracellular matrix in the tendons. This review focuses on tendon repair and regeneration. Particular attention has been devoted to the innovative approaches in tissue engineering. Advanced manufacturing techniques, such as electrospinning, soft lithography, and three-dimensional (3D) printing, have been described. Furthermore, biological augmentation has been considered, as an emerging strategy with great therapeutic potential.

A Current Overview of Scaffold-Based Bone Regeneration Strategies with Dental Stem Cells

Bone defects due to trauma or diseases still pose a clinical challenge to be resolved in the current tissue engineering approaches. As an alternative to traditional methods to restore bone defects, such as autografts, bone tissue engineering aims to achieve new bone formation via novel biomaterials used in combination with multipotent stem cells and bioactive molecules. Mesenchymal stem cells (MSCs) can be successfully isolated from various dental tissues at different stages of development including dental pulp, apical papilla, dental follicle, tooth germ, deciduous teeth, periodontal ligament and gingiva. A wide range of biomaterials including polymers, ceramics and composites have been investigated for their potential as an ideal bone scaffold material. This article reviews the properties and the manufacturing methods of biomaterials used in bone tissue engineering, and provides an overview of bone tissue regeneration approaches of scaffold and dental stem cell combinations as well as their limitations.

Silk fibroin and silk-based biomaterial derivatives for ideal wound dressings

Silk fibroin (SF) is derived from Bombyx mori silkworm cocoons and has been used in textiles and as a suture material for decades. More recently, SF has been used for various new biomedical applications, including as a wound dressing, owing to its excellent biological and mechanical properties. Specifically, the mechanical stiffness, versatility, biocompatibility, biodegradability, water vapour permeability and slight bactericidal properties make SF an excellent candidate biomaterial for wound dressing applications. The effectiveness of SF as a wound dressing has been tested and well-documented in vitro as well as in-vivo, as described here. Dressings based on SF are currently used for treating a wide variety of chronic and acute (e.g. burn) wounds. SF and its derivatives prepared as biomaterials are available as sponges, hydrogels, nanofibrous matrices, scaffolds, micro/nanoparticles, and films. The present review discusses the potential role of SF in wound dressing and its modulation for wound dressing applications. The comparison of SF based dressings with other natural polymers understands the readers, the scope and limitation of the subject in-depth.

Comprehensive Survey on Nanobiomaterials for Bone Tissue Engineering Applications

One of the most important ideas ever produced by the application of materials science to the medical field is the notion of biomaterials. The nanostructured biomaterials play a crucial role in the development of new treatment strategies including not only the replacement of tissues and organs, but also repair and regeneration. They are designed to interact with damaged or injured tissues to induce regeneration, or as a forest for the production of laboratory tissues, so they must be micro-environmentally sensitive. The existing materials have many limitations, including impaired cell attachment, proliferation, and toxicity. Nanotechnology may open new avenues to bone tissue engineering by forming new assemblies similar in size and shape to the existing hierarchical bone structure. Organic and inorganic nanobiomaterials are increasingly used for bone tissue engineering applications because they may allow to overcome some of the current restrictions entailed by bone regeneration methods. This review covers the applications of different organic and inorganic nanobiomaterials in the field of hard tissue engineering.

Preparing polycaprolactone scaffolds using electrospinning technique for construction of artificial periodontal ligament tissue

Objectives

The strategies of tissue-engineering led to the development of living cell-based therapies to repair lost or damaged tissues, including periodontal ligament and to construct biohybrid implant. This work aimed to isolate human periodontal ligament stem cells (hPDLSCs) and implant them on fabricated polycaprolactone (PCL) for the regeneration of natural periodontal ligament (PDL) tissues.

Methods

hPDLSCs were harvested from extracted human premolars, cultured, and expanded to obtain PDL cells. A PDL-specific marker (periostin) was detected using an immunofluorescent assay. Electrospinning was applied to fabricate PCL at three concentrations (13%, 16%, and 20% weight/volume) in two forms, which were examined through field emission scanning electron microscopy (FESEM). The isolated hPDLSCs were implanted on the fabricated PCL. After 21 days, FESEM was conducted to evaluate the implanted scaffolds, and an MTT assay was performed to characterize the biological response of the PCL scaffold at different cell exposure durations (24, 48, and 72 h).

Results

Periostin was expressed in the expanded PDL cells, and this result revealed that 20% weight/volume PCL scaffold with a pore size of more than 10 μm was the best. The growth rates of PDLSCs were high. Cytotoxicity test of fabricated PCL scaffold demonstrated no significant change in the cell viability when compared with the negative control and no deteriorating or inhibitory effect on growth after different durations.

Conclusions

A cell sheet was successfully formed by using PCL as a scaffold to cover dental implants and promote PDL cell attachment, proliferation, and growth for biohybrid implant construction.

Extrusion and Microfluidic-based Bioprinting to Fabricate Biomimetic Tissues and Organs

Next generation engineered tissue constructs with complex and ordered architectures aim to better mimic the native tissue structures, largely due to advances in three-dimensional (3D) bioprinting techniques. Extrusion bioprinting has drawn tremendous attention due to its widespread availability, cost-effectiveness, simplicity, and its facile and rapid processing. However, poor printing resolution and low speed have limited its fidelity and clinical implementation. To circumvent the downsides associated with extrusion printing, microfluidic technologies are increasingly being implemented in 3D bioprinting for engineering living constructs. These technologies enable biofabrication of heterogeneous biomimetic structures made of different types of cells, biomaterials, and biomolecules. Microfluiding bioprinting technology enables highly controlled fabrication of 3D constructs in high resolutions and it has been shown to be useful for building tubular structures and vascularized constructs, which may promote the survival and integration of implanted engineered tissues. Although this field is currently in its early development and the number of bioprinted implants is limited, it is envisioned that it will have a major impact on the production of customized clinical-grade tissue constructs. Further studies are, however, needed to fully demonstrate the effectiveness of the technology in the lab and its translation to the clinic.

Novel combination of non-invasive morphological and solid-state characterisation of drug-loaded core-shell electrospun fibres

In recent years, core-shell nanofibrous drug delivery systems have received increasing attention due to their ability to incorporate two or more active pharmaceutical ingredients (APIs) individually into the desired layer (either core or sheath) and thereby finely tune the release profiles of even incompatible drugs in one system. This study aims to perform formulation and solid-state characterisation of levofloxacin-loaded polylactic acid (PLA) - naproxen-sodium-loaded polyvinyl pyrrolidone (PVP) bicomponent core-shell fibrous sheets and examine the electro spinnability of the precursor combinations. The selected drugs have potential therapeutic relevance in similar systems intended for wound healing; however, in this study, they are used as model drugs to understand the physicochemical properties of a drug loaded system. In order to determine the best core- and shell-solution combination, a full factorial experimental design is used. A combination of various morphological (scanning electron microscopy and transmission electron microscopy) and microstructural characterisation techniques (X-ray photoelectron spectroscopy and Raman spectroscopy) was applied to non-invasively obtain information about the structure of the fibres and the embedded drugs. The results indicate that core-shell fibres of different compositions could be successfully prepared with various structural homogeneities. The best core-shell structure was obtained using a combination of 15% (w/w) shell concentration and 8% (w/w) PLA solution concentration. In addition to the conventional core-shell structural verification methods, the Raman spectroscopy method was implemented to reveal not only the core-shell structure of the PLA/PVP nanofibers but also the form of the embedded drugs. The Raman mapping of the fibres confirm the above results, and it is shown that an amorphous solid dispersion is formed as a result of the coaxial electrospinning process.