Nanogels fabricated from bovine serum albumin and chitosan via self-assembly for delivery of anticancer drug

Biopolymeric Nanogel as a Drug Delivery System for Doxorubicin-Improved Drug Stability and Enhanced Antineoplastic Activity in Skin Cancer Cells

In this study, doxorubicin was loaded in a chitosan-albumin nanogel with the aim of improving its stability and exploring the potential of the system in the treatment of skin cancer. Infrared spectroscopy and X-ray diffraction confirmed the encapsulation of the drug. Transmission electron microscopy revealed the spherical shape of the nanogel particles. The drug-loaded nanogel was characterized with a small diameter of 29 nm, narrow polydispersity (0.223) and positive zeta potential (+34 mV). The exposure of encapsulated doxorubicin to light (including UV irradiation and daylight) did not provoke any degradation, whereas the nonencapsulated drug was significantly degraded. In vitro studies on keratinocytes (HaCaT) and epidermoid squamous skin carcinoma cells (A-431) disclosed that the encapsulated doxorubicin was more cytotoxic on both cell lines than the pure drug was. More importantly, the cytotoxic concentration of encapsulated doxorubicin in carcinoma cells was approximately two times lower than that in keratinocytes, indicating that it would not affect them. Thus, the loading of doxorubicin into the developed chitosan-albumin nanogel definitely stabilized the drug against photodegradation and increased its antineoplastic effect on the skin cancer cell line.

Chitosan/Alginate Nanogels Containing Multicore Magnetic Nanoparticles for Delivery of Doxorubicin

In this study, multicore-like iron oxide (Fe3O4) and manganese ferrite (MnFe2O4) nanoparticles were synthesized and combined with nanogels based on chitosan and alginate to obtain a multimodal drug delivery system. The nanoparticles exhibited crystalline structures and displayed sizes of 20 ± 3 nm (Fe3O4) and 11 ± 2 nm (MnFe2O4). The Fe3O4 nanoparticles showed a higher saturation magnetization and heating efficiency compared with the MnFe2O4 nanoparticles. Functionalization with citrate and bovine serum albumin was found to improve the stability and modified surface properties. The nanoparticles were encapsulated in nanogels, and provided high drug encapsulation efficiencies (~70%) using doxorubicin as a model drug. The nanogels exhibited sustained drug release, with enhanced release under near-infrared (NIR) laser irradiation and acidic pH. The nanogels containing BSA-functionalized nanoparticles displayed improved sustained drug release at physiological pH, and the release kinetics followed a diffusion-controlled mechanism. These results demonstrate the potential of synthesized nanoparticles and nanogels for controlled drug delivery, offering opportunities for targeted and on-demand release in biomedical applications.

Robust Protocol for the Synthesis of BSA Nanohydrogels by Inverse Nanoemulsion for Drug Delivery

In a highly efficient and reproducible process, bovine serum albumin (BSA) nanogels are prepared from inverse nanoemulsions. The concept of independent nanoreactors of the individual droplets in the nanoemulsions allows high protein concentrations of up to 0.6% in the inverse total system. The BSA gel networks are generated by the 1-ethyl-3-[3-dimethylaminopropyl]carbodiimide hydrochloride coupling strategy widely used in protein chemistry. In a robust work-up protocol, the hydrophobic continuous phase of the inverse emulsion is stepwise replaced by water without compromising the colloidal stability and non-toxicity of the nanogel particles. Further, the simple process allows the loading of the nanogels with various cargos like a dye (Dy-495), a drug (ibuprofen), another protein [FMN-binding fluorescent protein (EcFbFP)], and oligonucleotides [plasmid DNA for enhanced GFP expression in mammalian cells (pEGFP c3) and a synthetic anti-Pseudomonas aeruginosa aptamer library]. These charged nanoobjects work efficiently as carriers for staining and transfection of cells. This is exemplarily shown for a phalloidin dye and a plasmid DNA as cargo with adenocarcinomic human alveolar basal epithelial cells (A549), a cell revertant of the SV-40 cancer rat cell line SV-52 (Rev2), and human breast carcinoma cells (MDA-MB-231), respectively.

Nanostructured Lipid Carrier-Based Gel for Repurposing Simvastatin in Localized Treatment of Breast Cancer: Formulation Design, Development, and In Vitro and In Vivo Characterization

Simvastatin (SMV) is noticed as a repurposed candidate to be effective against breast cancer (BC). However, poor solubility, dose-limiting toxicities, and side effects are critical hurdles in its use against BC. The above drawbacks necessitate the site-specific (localized) delivery of SMV via suitable nanocarriers. Therefore, the present study intended to develop SMV nanostructured lipid carrier (NLC)-based gel using carbopol-934 as a gelling agent to achieve local delivery and improve patient compliance while combating BC. The SMV NLCs were fabricated by melt-emulsification ultrasonication technique using stearic acid as solid lipid, olive oil (OO) as liquid lipid, tween 20 as a surfactant, and PEG-200 as a co-surfactant, and optimized by Box-Behnken design. The optimized SMV-loaded NLCs displayed % entrapment efficiency of 91.66 ± 5.2% and particle size of 182 ± 11.9 nm. The pH of NLC-based gels prepared using a 2.0% w/v of carbopol-934 was found in the range of 5.3-5.6 while the viscosity was in the range of 5.1-6.6 Pa.S. Besides, NLC-based gels exhibited higher and controlled SMV release (71-76%) at pH 6.8 and (78-84%) at pH 5.5 after 48 h than SMV conventional gel (37%) at both pH 6.8 and 5.5 after 48 h. The ex vivo permeation of SMV from NLC-based gel was 3.8 to 4.5 times more than conventional gel. Notably, SMV-loaded NLCs displayed ameliorated cytotoxicity than plain SMV against MCF-7 and MDA-MB-231 BC cells. No substantial difference was noticed in the cytotoxicity of NLC-based gels and pure SMV against both cell lines. The SMV NLC-based gel exhibited the absence of skin irritation in vivo in the mice following topical application. In addition, the histopathological study revealed no alteration in the mice skin anatomy. Furthermore, the SMV-loaded NLCs and NLC-based gels were stable for 6 months at refrigerator conditions (4°C ± 2°C). Thus, the present research confirms that NLC-based gel can be a safe, efficacious, and novel alternative to treat BC.

Research progress on albumin-based hydrogels: Properties, preparation methods, types and its application for antitumor-drug delivery and tissue engineering

Albumin is derived from blood plasma and is the most abundant protein in blood plasma, which has good mechanical properties, biocompatibility and degradability, so albumin is an ideal biomaterial for biomedical applications, and drug-carriers based on albumin can better reduce the cytotoxicity of drug. Currently, there are numerous reviews summarizing the research progress on drug-loaded albumin molecules or nanoparticles. In comparison, the study of albumin-based hydrogels is a relatively small area of research, and few articles have systematically summarized the research progress of albumin-based hydrogels, especially for drug delivery and tissue engineering. Thus, this review summarizes the functional features and preparation methods of albumin-based hydrogels, different types of albumin-based hydrogels and their applications in antitumor drugs, tissue regeneration engineering, etc. Also, potential directions for future research on albumin-based hydrogels are discussed.

Formation and physicochemical properties of glycogen phosphorylase in complex with a cationic polyelectrolyte

The accumulation of rabbit muscle glycogen phosphorylase b (RMGPb) in electrostatic complexes with the cationic polyelectrolyte poly 2-(dimethylamino) ethyl methacrylate in its quenched form (QPDMAEMA) was studied in two buffer solutions. In the N-bis(2-hydroxyethyl)-2-aminoethanesulfonic acid (BES) buffer, large complexes of RMGPb-QPDMAEMA were formed which adopted smaller sizes as QPDMAEMA concentration increased. However, in N-(2-hydroxyethyl)piperazine-N'-(2-ethanesulfonic acid) (HEPES) buffer, the hydrodynamic radius of the formed complexes gradually increased as the polymer concentration increased. Zeta potential measurements (ζ_p) showed that RMGPb significantly changed the ζ_p of the QPDMAEMA aggregates. Fluorescence studies showed that the interaction between RMGPb and QPDMAEAMA was enhanced as polymer concentration increased. Specifically, 8-anilinonaphthalene-1-sulfonic acid (ANS) fluorescence indicated that in the BES buffer the aggregates became denser as more QPDMAEMA was added, while in the HEPES buffer the density of the formed structures decreased. RMGPb's secondary structure was examined by Attenuated Total Reflection - Fourier Transform Infrared (ATR-FTIR) and Circular Dichroism (CD) showing that QPDMAEMA interaction with RMGPb does not induce any changes to the secondary structure of the enzyme. These observations suggest that cationic polyelectrolytes may be utilized for the formulation of RMGPb in multifunctional nanostructures and be further exploited in innovative biotechnology applications and bioinspired materials development.

Advanced Hydrogels for the Controlled Delivery of Insulin

Insulin is a peptide hormone that is key to regulating physiological glucose levels. Its molecular size and susceptibility to conformational change under physiological pH make it challenging to orally administer insulin in diabetes. The most effective route for insulin delivery remains daily injection. Unfortunately, this results in poor patient compliance and increasing the risk of micro- and macro-vascular complications and thus rising morbidity and mortality rates in diabetics. The use of 3D hydrogels has been used with much interest for various biomedical applications. Hydrogels can mimic the extracellular matrix (ECM) and retain large quantities of water with tunable properties, which renders them suitable for administering a wide range of sensitive therapeutics. Several studies have demonstrated the fixation of insulin within the structural mesh of hydrogels as a bio-scaffold for the controlled delivery of insulin. This review provides a concise incursion into recent developments for the safe and effective controlled delivery of insulin using advanced hydrogel platforms with a special focus on sustained release injectable formulations. Various hydrogel platforms in terms of their methods of synthesis, properties, and unique features such as stimuli responsiveness for the treatment of Type 1 diabetes mellitus are critically appraised. Key criteria for classifying hydrogels are also outlined together with future trends in the field.

Tumor Microenvironment-Responsive Polypeptide Nanogels for Controlled Antitumor Drug Delivery

Tumor microenvironment-responsive polypeptide nanogels belong to a biomaterial with excellent biocompatibility, easily adjustable performance, biodegradability, and non-toxic properties. They are developed for selective delivery of antitumor drugs into target organs to promote tumor cell uptake, which has become an effective measure of tumor treatment. Endogenous (such as reduction, reactive oxygen species, pH, and enzyme) and exogenous (such as light and temperature) responsive nanogels can release drugs in response to tumor tissues or cells to improve drug distribution and reduce drug side effects. This article systematically introduces the research progress in tumor microenvironment-responsive polypeptide nanogels to deliver antitumor drugs and provides a reference for the development of antitumor nanoformulations.

Utilization of diverse protein sources for the development of protein-based nanostructures as bioactive carrier systems: A review of recent research findings (2010-2021)

Consumer awareness of the relationship between health and nutrition has caused a substantial increase in the demand for nutraceuticals and functional foods containing bioactive compounds (BACs) with potential health benefits. However, the direct incorporation of many BACs into commercial food and beverage products is challenging because of their poor matrix compatibility, chemical instability, low bioavailability, or adverse impact on food quality. Advanced encapsulation technologies are therefore being employed to overcome these problems. In this article, we focus on the utilization of plant and animal derived proteins to fabricate micro and nano-particles that can be used for the oral delivery of BACs such as omega-3 oils, vitamins and nutraceuticals. This review comprehensively discusses different methods being implemented for fabrications of protein-based delivery vehicles, types of proteins used, and their compatibility for the purpose. Finally, some of the challenges and limitations of different protein matrices for encapsulation of BACs are deliberated upon. Various approaches have been developed for the fabrication of protein-based microparticles and nanoparticles, including injection-gelation, controlled denaturation, and antisolvent precipitation methods. These methods can be used to construct particle-based delivery systems with different compositions, sizes, surface hydrophobicity, and electrical characteristics, thereby enabling them to be used in a wide range of applications.

Reviewing Chitin/Chitosan Nanofibers and Associated Nanocomposites and Their Attained Medical Milestones

Chitin/chitosan research is an expanding field with wide scope within polymer research. This topic is highly inviting as chitin/chitosan's are natural biopolymers that can be recovered from food waste and hold high potentials for medical applications. This review gives a brief overview of the chitin/chitosan based nanomaterials, their preparation methods and their biomedical applications. Chitin nanofibers and Chitosan nanofibers have been reviewed, their fabrication methods presented and their biomedical applications summarized. The chitin/chitosan based nanocomposites have also been discussed. Chitin and chitosan nanofibers and their binary and ternary composites are represented by scattered superficial reports. Delving deep into synergistic approaches, bringing up novel chitin/chitosan nanocomposites, could help diligently deliver medical expectations. This review highlights such lacunae and further lapses in chitin related inputs towards medical applications. The grey areas and future outlook for aligning chitin/chitosan nanofiber research are outlined as research directions for the future.

Chitosan-bovine serum albumin-Carbopol 940 nanogels for mupirocin dermal delivery: ex-vivo permeation and evaluation of cellular binding capacity via radiolabeling

The goal of this study was to develop and examine the nanogel-based topical delivery system of mupirocin. Nanogels were prepared with chitosan and bovine serum albumin by ionic gelation and Carbopol 940 was added to improve the gelling/adhesive properties. Detailed characterization studies were performed and the cellular binding capacity of radiolabeled nanogels was investigated on CCD-1070Sk cell lines. Results indicate the successful formation of nanogels with particle size and zeta potential ranged between 341.920-603.320 nm and 13.120-24.300 mV, respectively. The mechanical and rheological studies proved pseudoplastic and strong elastic gel behavior (G' > G''). Mupirocin was successfully entrapped into nanogels with a ratio of more than 95% and the loaded drug was slowly released up to 93.89 ± 3.07% within 24 h. The ex vivo penetration and permeation percentages of mupirocin were very low (1.172 ± 0.202% and 0.161 ± 0.136%) indicating the suitability of nanogels for dermal use against superficial skin infections. The microbiological studies pointed out the effectiveness of nanogels against Staphylococcus aureus strains. Nanogels did not show toxicity signs and the cell binding capacity of radiolabeled formulations was found to be higher than [^99mTc]NaTcO₄ to CCD-1070Sk cell line. Overall, mupirocin nanogels might be considered as a potential and safe topical treatment option for bacterial skin infections.

Promising nanogels loaded with usnic acid for oral ulcer treatment: development, characterization, and in vivo evaluation in rabbits

This study aimed to present an effective formulation targeting oral ulcers that will remain in the application site for a longer period, reducing the frequency of administration. As a candidate formulation, usnic acid (UA) was loaded into the optimum nanogels. The characterization studies included physical, rheological, and bioadhesive properties as well as in vitro release and ex vivo studies. The rheological results revealed that the nanogels present pseudoplastic flow behavior. In vitro drug release showed a prolonged pattern. In further, the chosen UA nanogels showed very low percentages of penetration and permeation. F13, which showed the highest release, suitable bioadhesive properties (0.475 ± 0.033 N/cm²) and eligible particle size (250.22 ± 4.11 nm), PDI (0.089 ± 0.052), and zeta potential (20.56 ± 0.330 mV) values were chosen for in vivo experiments. The selected UA nanogels showed effective antimicrobial activity against Bacillus Cereus and great in vivo wound healing properties. The results indicated that suitable UA nanogels with desired properties could be prepared. The therapeutic potential of the nanogels for oral ulcers was assessed using an animal model and the histopathological findings suggested that the optimized formulation is a good choice for oral ulcer treatment. Nonetheless, further research is recommended to support its efficacy by applying pharmacodynamic and pharmacokinetic studies in human individuals.

pH-Sensitive nanogels for drug delivery in cancer therapy

Compared to normal tissue, solid tumors exhibit a lower pH value. Such pH gradient can be used to design pH-sensitive nanogels for selective drug delivery. The acid-sensitive elements in the nanogel cause it to swell/degrade rapidly, followed by rapid drug release.

Self-Assembled Nanocarriers Based on Modified Chitosan for Biomedical Applications: Preparation and Characterization

Protein-polysaccharide systems are of increasing interest as their combined attributes allow for fulfilling a broad range of applications in biomedical and pharmaceutical fields. In this study, the preparation of nanogels based on maleic anhydride chitosan derivatives (MAC) and bovine serum albumin (BSA) was achieved through a self-assembly process performed in aqueous phase. A series of experiments performed by varying the concentrations of MAC and BSA were conducted to find an appropriate mixing ratio for the polymer solutions leading to thermodynamically stable nanogels with the ability to encapsulate active compounds. The influence of temperature on the formation of nanogels was also studied. The consequent conformational changes were monitored using ultraviolet-visible (UV-VIS) spectrophotometry. The spectrophotometric investigations combined with diffraction light scattering (DLS) technique and zeta potential measurement results were correlated to determine the interaction mechanism and assess the self-assembling processes during nanogel formation. It was found that the hydrodynamic diameter (D_h) of the nanoparticles increased slightly at acidic pH, and the protonation of ionizable amino groups with the pH was confirmed by the zeta potential measurements. MAC/BSA nanogels also exhibited antimicrobial properties after being loaded with amoxicillin (Amox), which is an antibiotic used for the treatment of various infections. The experimental data resulting from this study provide theoretical guidance for the design and development of attractive nanocarriers for a large variety of biomedical applications.

Chitosan Derivatives in Macromolecular Co-assembly Nanogels with Potential for Biomedical Applications

Maleoyl-chitosan/poly(aspartic acid) nanogels were developed and characterized in order to assess its suitability for biomedical applications. Thus, the physicochemical properties were investigated and correlated with the composition of the new structures. Dynamic light scattering measurements, correlated with transmission electron microscopy images, demonstrated that nanogels size distribution was narrow with average diameter between 186 and 246 nm, and presented positive zeta potential values. The sensitivity of nanogels at pH and temperature was also evaluated. Nanogels loaded with amoxicillin showed a controlled release profile dependent on nanogel content. The formulations loaded with amoxicillin had antibacterial properties, and the cytotoxicity tests indicated good in vivo biocompatibility. In conclusion, the new synthesized polyelectrolyte nanogels, which can provide a stable environment for the encapsulated drugs, can be used as a multifunctional platform for administration of antimicrobial agents from the spectrum of antibiotics that have a very poor biodistribution.

Magnetic and light-responsive nanogels based on chitosan functionalized with Au nanoparticles and poly(N-isopropylacrylamide) as a remotely triggered drug carrier

Synthesis of thermosensitive nanogels based on functionalized chitosan with Au nanoparticles (NPs) and poly(NIPAM) to release of drug molecules under light exposure.

Synthesis, Bioapplications, and Toxicity Evaluation of Chitosan-Based Nanoparticles

The development of advanced nanomaterials and technologies is essential in biomedical engineering to improve the quality of life. Chitosan-based nanomaterials are on the forefront and attract wide interest due to their versatile physicochemical characteristics such as biodegradability, biocompatibility, and non-toxicity, which play a promising role in biological applications. Chitosan and its derivatives are employed in several applications including pharmaceuticals and biomedical engineering. This article presents a comprehensive overview of recent advances in chitosan derivatives and nanoparticle synthesis, as well as emerging applications in medicine, tissue engineering, drug delivery, gene therapy, and cancer therapy. In addition to the applications, we critically review the main concerns and mitigation strategies related to chitosan bactericidal properties, toxicity/safety using tissue cultures and animal models, and also their potential environmental impact. At the end of this review, we also provide some of future directions and conclusions that are important for expanding the field of biomedical applications of the chitosan nanoparticles.

Chitosan as a Natural Copolymer with Unique Properties for the Development of Hydrogels

Hydrogel-based polymers are represented by those hydrophilic polymers having functional groups in their chain such as amine (NH2), hydroxyl [-OH], amide (-CONH-, -CONH2), and carboxyl [COOH]. These hydrophilic groups raise their potential to absorb fluids or aqueous solution more than their weights. This physicochemical mechanism leads to increased hydrogel expansion and occupation of larger volume, the process which shows in swelling behavior. With these unique properties, their use for biomedical application has been potentially raised owing also to their biodegradability and biocompatibility. Chitosan as a natural copolymer, presents a subject for hydrogel structures and function. This review aimed to study the structure as well as the function of chitosan and its hydrogel properties.

Recent Advances in Degradable Hybrids of Biomolecules and NGs for Targeted Delivery

Recently, the fast development of hybrid nanogels dedicated to various applications has been seen. In this context, nanogels incorporating biomolecules into their nanonetworks are promising innovative carriers that gain great potential in biomedical applications. Hybrid nanogels containing various types of biomolecules are exclusively designed for: improved and controlled release of drugs, targeted delivery, improvement of biocompatibility, and overcoming of immunological response and cell self-defense. This review provides recent advances in this rapidly developing field and concentrates on: (1) the key physical consequences of using hybrid nanogels and introduction of biomolecules; (2) the construction and functionalization of degradable hybrid nanogels; (3) the advantages of hybrid nanogels in controlled and targeted delivery; and (4) the analysis of the specificity of drug release mechanisms in hybrid nanogels. The limitations and future directions of hybrid nanogels in targeted specific- and real-time delivery are also discussed.

Self-Assembled Reduced Albumin and Glycol Chitosan Nanoparticles for Paclitaxel Delivery

Cancer continues to pose health problems for people all over the world. Nanoparticles (NPs) have emerged as a promising platform for effective cancer chemotherapy. NPs formed by the assembly of proteins and chitosan (CH) through noncovalent interactions are attracting a great deal of interest. However, the poor water solubility of CH and low stability of this kind of NP limit its practical application. Herein, the formation of reduced bovine serum albumin (rBSA) and glycol chitosan (GC) nanoparticles (rBG-NPs) stabilized by hydrophobic interactions and disulfide bonds was demonstrated for paclitaxel (PTX) delivery. The effects of the rBSA:GC mass ratio and pH on the particle size, polydispersity index (PDI), number of particles, and surface charge were evaluated. The formation mechanism and stability of the NPs were determined by compositional analysis and dynamic light scattering. Hydrophobic and electrostatic interactions were the driving forces for the formation of the rBG-NPs, and the NPs were stable under physiological conditions. PTX was successfully encapsulated into rBG-NPs with a high encapsulation efficiency (∼90%). PTX-loaded rBG-NPs had a particle size of ∼400 nm with a low PDI (0.2) and positive charge. rBG-NPs could be internalized by HeLa cells, possibly via endocytosis. An in vitro cytotoxicity study revealed that PTX-loaded rBG-NPs had anticancer activity that was lower than that of a Taxol-like formulation at 24 h but had similar activity at 48 h, possibly because of the slow release of PTX into the cells. Our study suggests that rBG-NPs could be used as a potential nanocarrier for hydrophobic drugs.

Preparation and stability of nano-scaled gel beads of λ-carrageenan bound with ferric ions

Iron-deficiency anemia (IDA) is a major global public health problem, and the iron fortifiers in diet are clearly needed in the prevention and improvement of IDA for humans. A novel nano-scaled gel beads of λ-carrageenan (λ-car) specifically binding with ferric ions was developed to be a promising iron fortifier with no adverse organoleptic changes on food. Turbidity measurement, thermogravimetric analysis and Fourier transform infrared spectroscopy confirmed the successful chelating. The gel beads of λ-car-Fe³⁺ complex showed good dispersibility and solvent stability. The in vitro cell viability of HepG2 cells treated with λ-car-Fe³⁺ was over 75% at 5 mg/mL of ferric ions, indicating a significant cytotoxicity reduction of ferric ions. The stability of λ-car-Fe³⁺ complex powder was obviously increased against browning during 60 d storage with zein coating, which was attributed to the prevention of moisture permeation. Zein coated gel beads also performed a slow release of ferric ions in simulated gastrointestinal juices, resulting from the compact and hydrophobic zein surface delaying the dissociation of λ-car-Fe³⁺ in acidic environment. This λ-car-Fe³⁺ complex would have a great potential as a safe iron fortifier and facilitate iron supplementary with the advantage to relieve the side effects of iron ions.

Controlled drug delivery vehicles for cancer treatment and their performance

Although conventional chemotherapy has been successful to some extent, the main drawbacks of chemotherapy are its poor bioavailability, high-dose requirements, adverse side effects, low therapeutic indices, development of multiple drug resistance, and non-specific targeting. The main aim in the development of drug delivery vehicles is to successfully address these delivery-related problems and carry drugs to the desired sites of therapeutic action while reducing adverse side effects. In this review, we will discuss the different types of materials used as delivery vehicles for chemotherapeutic agents and their structural characteristics that improve the therapeutic efficacy of their drugs and will describe recent scientific advances in the area of chemotherapy, emphasizing challenges in cancer treatments.

Improving the delivery of cancer therapies to tumor sites is crucial to reduce unwanted side effects and patient mortality rates. Pralay Maiti and colleagues at the Indian Institute of Technology in Varanasi, India, review the latest developments in drug delivery vehicles and treatment approaches designed to enhance the effectiveness of current cancer therapies. New nanoparticle-based carriers, hydrogels and hybrid materials that offer controlled and sustained drug release are showing great promise in animal models. Furthermore, materials that respond to stimuli such as heat, light, magnetic or electric fields are also being tested to aid target-specific drug delivery and, thus, avoid damage to healthy tissues. Although there are some challenges in translating these findings to the clinic, there is no doubt that technological advances are shaping better and safer treatment options.

Biocompatible nanogel derived from functionalized dextrin for targeted delivery of doxorubicin hydrochloride to MG 63 cancer cells

The present article demonstrates the targeted delivery of doxorubicin hydrochloride to human osteosarcoma cancer cell lines (MG 63) using functionalized dextrin based crosslinked, pH responsive and biocompatible nanogel. The nanogel has been prepared through Michael-type addition reaction using dextrin (Dxt), N, N'-methylene bisacrylamide (MBA, as crosslinker), acrylic acid (AA, as monomer) and potassium persulfate (KPS, as initiator). The structure, composition, morphology of the nanogel have been explored using FTIR and ¹H NMR spectroscopy, XRD, TGA, DSC, CHN and AFM analyses. The TEM analysis confirmed that the size of nanogel appeared within 100nm, while DLS study indicates that the diameter of the nanogel remained between 113 and 126nm. The AFM study implied the porous morphology of the synthesized nanogel. The rheological study suggests the gel behaviour of the synthesized nanogel at 37±0.1°C. Difference in% swelling at pH 5.5 and 7.4 indicates pH-responsiveness of the nanogel. The in vitro cytocompatibility results ascertained that the nanogel is non-toxic to human mesenchymal stem cells (hMSCs). In vitro cellular uptake study confirmed that FITC-loaded nanogel can cross the cellular membrane and be well uptake by the cell cytoplasm. The nanogel could efficiently encapsulate doxorubicin hydrochloride (Dox) with the loading efficiency of 27±0.2% after 72h. The Dox-loaded nanogel demonstrates anti-cancer activity towards MG 63 cancer cells and release the encapsulated drug in a controlled way.

Recent advances in engineered chitosan-based nanogels for biomedical applications

Recent progress in the preparation and biomedical applications of engineered chitosan-based nanogels has been comprehensively reviewed.

Templated fabrication of pH-responsive poly(l-glutamic acid) based nanogels via surface-grafting and macromolecular crosslinking

A novel class of pH-responsive poly(l-glutamic acid)/chitosan (PLGA/CS) nanogels was fabricated by a templating approach, combined with a “grafting from” method and intermacromolecular crosslinking technique.

Gamma sterilization of diclofenac sodium loaded- N-trimethyl chitosan nanoparticles for ophthalmic use

This study was conducted to investigate the effect of gamma irradiation on physicochemical properties of N-trimethyl chitosan (TMC), diclofenac sodium (DC) and diclofenac sodium loaded N-trimethylchitosan nanoparticles (DC-TMCNs), and to determine suitable doses of gamma rays for sterilization of DC-TMCNs. Physicochemical properties of TMC, DC and DC-TMCNs before and after exposure to gamma rays at various doses were investigated. It was found that gamma irradiation at doses of 5-25kGy did not cause any significant changes in physical and chemical properties of TMC, DC and DC-TMCNs. The bioburden of DC-TMCNs was 1.5×10⁶ CFU/vial. The initial contaminating bacteria were radiosensitive bacteria. A number of microorganisms was reduced to 10^-6 after exposure to 9.9kGy of gamma rays. Therefore, DC-TMCNs could be sterilized by gamma irradiation at a dose of 10kGy, which did not alter their physicochemical properties and did not produce any substances toxic to the eye.