Impact assessment of different electric fields on the quality parameters of blueberry flavored dairy desserts processed by Ohmic Heating

Bioactivity and volatile compound evaluation in sheep milk processed by ohmic heating

Ohmic heating may improve bioactive compounds and processing, ensuring food safety of beverages, liquid and pasty food, or liquid with solid pieces. Due to those traits, this study conducted a comparison between ohmic heating technology and conventional heating (CH), with a focus on assessing the impact of both methods on functional compounds (such as angiotensin-converting enzyme inhibition, α-amylase and α-glucosidase inhibition, and antioxidant activity) in both fresh and thawed raw sheep milk, which had been frozen for up to 3 mo. Different ohmic heating conditions were applied and compared to CH (3.33-8.33 V/cm vs. CH [73°C/15 s]). A total of 18 peptides with some functional activities were identified by MALDI-TOF mass spectrometry analysis. Ohmic heating samples presented the highest activities related to health, followed by CH and raw milk samples; antioxidant activity range was from 0.11% to 0.71%, antihypertensive activity ranged from 0.20% to 0.72%, and antidiabetic activity ranged from 0.21% to 0.79%. Of 51 volatile compounds detected, some were degraded by freezing, storing, and heating the sheep milk. This study showed for the first time that ohmic heating processing improved sheep milk bioactive peptides and preserved volatile compounds.

Shade of Innovative Food Processing Techniques: Potential Inducing Factors of Lipid Oxidation

With increasing environmental awareness and consumer demand for high-quality food products, industries are strongly required for technical innovations. The use of various emerging techniques in food processing indeed brings many economic and environmental benefits compared to conventional processes. However, lipid oxidation induced by some "innovative" processes is often "an inconvenient truth", which is scarcely mentioned in most studies but should not be ignored for the further improvement and optimization of existing processes. Lipid oxidation poses a risk to consumer health, as a result of the possible ingestion of secondary oxidation products. From this point of view, this review summarizes the advance of lipid oxidation mechanism studies and mainly discloses the shade of innovative food processing concerning lipid degradation. Sections involving a revisit of classic three-stage chain reaction, the advances of polar paradox and cut-off theories, and potential lipid oxidation factors from emerging techniques are described, which might help in developing more robust guidelines to ensure a good practice of these innovative food processing techniques in future.

Effect of Moderate Electric Fields on the Physical and Chemical Characteristics of Cheese Emulsions

Cheese powder is a multifunctional ingredient that is produced by spray drying a hot cheese emulsion called cheese feed. Feed stability is achieved by manipulating calcium equilibrium using emulsifying salts. However, the increased demand for 'green' products created a need for alternative production methods. Therefore, this study investigated the impact of ohmic heating (OH) on Cheddar cheese, mineral balance, and the resulting cheese feed characteristics compared with a conventional method. A full factorial design was implemented to determine the optimal OH parameters for calcium solubilization. Electric field exposure and temperature had a positive correlation with mineral solubilization, where temperature had the greatest impact. Structural differences in pre-treated cheeses (TC) were analyzed using thermorheological and microscopic techniques. Obtained feeds were analyzed for particle size, stability, and viscosity. OH-treatment caused a weaker cheese structure, indicating the potential removal of calcium phosphate complexes. Lower component retention of OH_TC was attributed to the electroporation effect of OH treatment. Microscopic images revealed structural changes, with OH_TC displaying a more porous structure. Depending on the pre-treatment method, component recovery, viscosity, particle size distribution, and colloidal stability of the obtained feeds showed differences. Our findings show the potential of OH in mineral solubilization; however, further improvements are needed for industrial application.

Impact of adding xylooligosaccharides encapsulated in butter: Microstructural, optical, rheological and sensory aspects

This study investigated the microstructure, rheological properties, and sensory characteristics of butters produced with free and encapsulated xylooligosaccharides (XOS). Four formulations of butter were processed: BCONT: 0 % w/w XOS (control); BXOS: 20% w/w free XOS; BXOS-ALG: 20% w/w XOS microencapsulated with alginate (XOS-alginate ratio of 3:1 w/w); and BXOS-GEL: 20% w/w XOS microencapsulated with alginate-gelatin (XOS-alginate-gelatin ratio of 3:1:1.5 w/w). The microparticles showed a bimodal distribution, low size and low span values, demonstrating physical stability to be included in emulsions. The XOS-ALG presented surface weighted mean diameter (D3.2) of 90.24 µm, volume-weighted mean diameter (D4.3) of 131.8 µm, and Span of 2.14. In contrast, the XOS-GEL presented D3.2 of 82.80 µm, D4.3 of 141.0 µm, and a Span of 2.46. Products with XOS were characterized by higher creaminess, sweet taste, and lower salty taste than the control. However, the addition form significantly impacted the other evaluated parameters. The utilization of XOS in a free form (BXOS) resulted in smaller droplet sizes (1.26 μm) than encapsulated XOS and control (XOS-ALG = 1.32 µm / XOS-GEL = 1.58 µm, / BCONT = 1.59 µm), and changes in the rheological parameters (higher values of shear stress, viscosity, consistency index, rigidity (J0), and Newtonian viscosity (ηN) and lower elasticity (τ)). Furthermore, it changed the color parameters (more yellow and dark color, lower L* and higher b* values). On the other hand, the utilization of micropaticles of XOS (BXOS-ALG and BXOS-GEL) kept shear stress, viscosity, consistency index, rigidity (J0), and elasticity (τ) more similar to control. The products had a less intense yellow color (lower b* values) and was perceived with more consistency and butter taste. However, the presence of particles was perceived by consumers. The results suggest that consumers were more attentive to reporting flavor-related attributes than texture. In conclusion, adding microparticles of XOS could improve butter's rheological and sensory properties. In conclusion, adding microparticles of XOS could improve butter's rheological and sensory properties.

Positive effects of thermosonication in Jamun fruit dairy dessert processing

The effects of thermosonication processing (TS, 90 °C, ultrasound powers of 200, 400, and 600 W) on the quality parameters of Jamun fruit dairy dessert compared to conventional heating processing (high-temperature short time, (HTST), 90 °C/20 s) were evaluated. Microbiological inactivation and stability, rheological parameters, physical properties, volatile and fatty acid profiles, and bioactive compounds were assessed. TS provided more significant microbial inactivation (1 log CFU mL-1) and higher microbial stability during storage (21 days) than HTST, with 3, 2, and 2.8 log CFU mL-1 lower counts for yeasts and molds, aerobic mesophilic bacteria, and lactic acid bacteria, respectively. In addition, TS-treated samples showed higher anti-hypertensive (>39%), antioxidant (>33%), and anti-diabetic (>27%) activities, a higher concentration of phenolic compounds (>22%), preservation of anthocyanins, and better digestibility due to the smaller fat droplet size (observed by confocal laser scanning microscopy). Furthermore, lower TS powers (200 W) improved the fatty acid (higher monounsaturated and polyunsaturated fatty acid contents, 52.78 and 132.24%) and volatile (higher number of terpenes, n = 5) profiles and decreased the atherogenic index. On the other hand, higher TS powers (600 W) maintained the rheological parameters of the control product and contributed more significantly to the functional properties of the products (antioxidant, anti-hypertensive, and anti-diabetic). In conclusion, TS proved to be efficient in treating Jamun fruit dairy dessert, opening space for new studies to define process parameters and expand TS application in other food matrices.

Ohmic Heating in the Food Industry: Developments in Concepts and Applications during 2013–2020

Various technologies have been evaluated as alternatives to conventional heating for pasteurization and sterilization of foods. Ohmic heating of food products, achieved by passage of an alternating current through food, has emerged as a potential technology with comparable performance and several advantages. Ohmic heating works faster and consumes less energy compared to conventional heating. Key characteristics of ohmic heating are homogeneity of heating, shorter heating time, low energy consumption, and improved product quality and food safety. Energy consumption of ohmic heating was measured as 4.6–5.3 times lower than traditional heating. Many food processes, including pasteurization, roasting, boiling, cooking, drying, sterilization, peeling, microbiological inhibition, and recovery of polyphenol and antioxidants have employed ohmic heating. Herein, we review the theoretical basis for ohmic treatment of food and the interaction of ohmic technology with food ingredients. Recent work in the last seven years on the effect of ohmic heating on food sensory properties, bioactive compound levels, microbial inactivation, and physico-chemical changes are summarized as a convenient reference for researchers and food scientists and engineers.

Ohmic heating increases inactivation and morphological changes of Salmonella sp. and the formation of bioactive compounds in infant formula

The effect of ohmic heating (OH) (50, 55, and 60 °C, 6 V/cm) on the inactivation kinetics (Weibull model) and morphological changes (scanning electron microscopy and flow cytometry) of Salmonella spp. in infant formula (IF) was evaluated. In addition, thermal load indicators (hydroxymethylfurfural and whey protein nitrogen index, HMF, and WPNI) and bioactive compounds (DPPH, total phenolics, ACE, α-amylase, and α-glucosidase inhibitory activities) were also studied. OH presented a more intense inactivation rate than conventional heating, resulting in a reduction of about 5 log CFU per mL at 60 °C in only 2.91 min, being also noted a greater cell membrane deformation, higher formation of bioactive compounds, and lower values for the thermal load parameters. Overall, OH contributed to retaining the nutritional value and improve food safety in IF processing.