A review on versatile applications of blends and composites of pullulan with natural and synthetic polymers

Comparative Analysis of Hydrogel Adsorption/Desorption with and without Surfactants

In this particular study, a hydrogel known as SAP-1 was synthesized through the grafting of acrylic acid-co-acrylamide onto pullulan, resulting in the creation of Pul-g-Poly (acrylic acid-co-acrylamide). Additionally, a sponge hydrogel named SAP-2 was prepared by incorporating the surfactant sodium dodecyl benzene sulfonate (SDBS) into the hydrogel through free radical solution polymerization. To gain further insight into the composition and properties of the hydrogels, various techniques, such as Fourier transform infrared spectroscopy, hydrogen nuclear magnetic resonance (1H NMR), atomic absorption spectroscopy, and field emission scanning electron microscopy (FE-SEM), were employed. Conversely, the absorption kinetics and the equilibrium capacities of the prepared hydrogels were investigated and analyzed. The outcomes of the investigation indicated that each of the synthesized hydrogels exhibited considerable efficacy as adsorbents for cadmium (II), copper (II), and nickel (II) ions. In particular, SAP-2 gel displayed a remarkable cadmium (II) ion absorption ability, with a rate of 190.72 mg/g. Following closely, SAP-1 gel demonstrated the ability to absorb cadmium (II) ions at a rate of 146.9 mg/g and copper (II) ions at a rate of 154 mg/g. Notably, SAP-2 hydrogel demonstrated the ability to repeat the adsorption-desorption cycles three times for cadmium (II) ions, resulting in absorption capacities of 190.72 mg/g, 100.43 mg/g, and 19.64 mg/g for the first, second, and third cycles, respectively. Thus, based on the abovementioned results, it can be concluded that all the synthesized hydrogels possess promising potential as suitable candidates for the adsorption and desorption of cadmium (II), copper (II), and nickel (II) ions.

Active pullulan-based coatings incorporated with Auricularia auricular extracts for preserving potato fresh-cuts

In the present study, Auricularia auricular polysaccharides (AAP) and Auricularia auricular proteins (AAPR) obtained from the waste products of Auricularia auricular were incorporated into pullulan (PUL) to obtain active packaging films/coatings. Results showed that incorporating AAP/AAPR into PUL-based films decreased their transparency, but increased the compactness, thermal stability, antioxidant, and antimicrobial properties. Adding 2% PUL films with 10%:10% of AAP/AAPR exhibiting good mechanical properties were applied to fresh-cut potatoes to avoid spoilage during eight days of storage, with significantly decreased in browning index, weight loss, microbial growth prevention and the total soluble solids was maintained. These results substantiated that pullulan containing AAP/AAPR as an active film/coating with antioxidant and antimicrobial properties has significant potential for maintaining safety and quality of fresh-cut potatoes and extending their shelf life.

A polyethylene glycol-grafted pullulan polysaccharide adhesive improves drug loading capacity and release efficiency

In this study, polyethylene glycol was grafted onto pullulan polysaccharides, resulting in the development of a novel adhesive termed PLUPE, offering superior drug loading capacity and rapid release efficiency. The efficacy of PLUPE was rigorously evaluated through various tests, including the tack test, shear strength test, 180° peel strength test, and human skin adhesion test. The results demonstrated that PLUPE exhibited a static shear strength that was 4.6 to 9.3 times higher than conventional PSAs, ensuring secure adhesion for over 3 days on human skin. A comprehensive analysis, encompassing electrical potential evaluation, calculation of interaction parameters, and FT-IR spectra, elucidated why improved the miscibility between the drug and PSAs, that the significant enhancement of intermolecular hydrogen bonding in the PLUPE structure. ATR-FTIR, rheological, and thermodynamic analyses further revealed that the hydrogen bonding network in PLUPE primarily interacted with polar groups in the skin. This interaction augmented the fluidity and free volume of PSA molecules, thereby promoting efficient drug release. The results confirmed the safety profile of PLUPE through skin irritation tests and MTT assays, bolstering its viability for application in TDDS patches. In conclusion, PLUPE represented a groundbreaking adhesive solution for TDDS patches, successfully overcoming longstanding challenges associated with PSAs.

Comprehensive review on recent trends and perspectives of natural exo-polysaccharides: Pioneering nano-biotechnological tools

Exopolysaccharides (EPSs), originating from various microbes, and mushrooms, excel in their conventional role in bioremediation to showcase diverse applications emphasizing nanobiotechnology including nano-drug carriers, nano-excipients, medication and/or cell encapsulation, gene delivery, tissue engineering, diagnostics, and associated treatments. Acknowledged for contributions to adsorption, nutrition, and biomedicine, EPSs are emerging as appealing alternatives to traditional polymers, for biodegradability and biocompatibility. This article shifts away from the conventional utility to delve deeply into the expansive landscape of EPS applications, particularly highlighting their integration into cutting-edge nanobiotechnological methods. Exploring EPS synthesis, extraction, composition, and properties, the discussion emphasizes their structural diversity with molecular weight and heteropolymer compositions. Their role as raw materials for value-added products takes center stage, with critical insights into recent applications in nanobiotechnology. The multifaceted potential, biological relevance, and commercial applicability of EPSs in contemporary research and industry align with the nanotechnological advancements coupled with biotechnological nano-cleansing agents are highlighted. EPS-based nanostructures for biological applications have a bright future ahead of them. Providing crucial information for present and future practices, this review sheds light on how eco-friendly EPSs derived from microbial biomass of terrestrial and aquatic environments can be used to better understand contemporary nanobiotechnology for the benefit of society.

Exploring polysaccharide-based bio-adhesive topical film as a potential platform for wound dressing application: A review

Wound dressings act as a physical barrier between the wound site and the external environment, preventing additional harm; choosing suitable wound dressings is essential for the healing process. Polysaccharide biopolymers have demonstrated encouraging findings and therapeutic prospects in recent decades about wound therapy. Additionally, polysaccharides have bioactive qualities like anti-inflammatory, antibacterial, and antioxidant capabilities that can help the process of healing. Due to their excellent tissue adhesion, swelling, water absorption, bactericidal, and immune-regulating properties, polysaccharide-based bio-adhesive films have recently been investigated as intriguing alternatives in wound management. These films also mimic the structure of the skin and stimulate the regeneration of the skin. This review presented several design standards and functions of suitable bio-adhesive films for the healing of wounds. Additionally, the most recent developments in the use of bio-adhesive films as wound dressings based on polysaccharides, including hyaluronic acid, chondroitin sulfate, dextran, alginate, chitosan, cellulose, konjac glucomannan, gellan gum, xanthan gum, pectin, guar gum, heparin, arabinogalactans, carrageen, and tragacanth gum, are thoroughly discussed. Lastly, to create a road map for the function of polysaccharide-based bio-adhesive films in advanced wound care, their clinical performances and future challenges in making bio-adhesive films by three-dimensional bioprinting are summarized.

Recent innovations (2020-2023) in the approaches for the chemical functionalization of curdlan and pullulan: A mini-review

Chemical modification represents a highly efficacious approach for enhancing the physicochemical characteristics and biological functionalities of natural polysaccharides. However, not all polysaccharides have considerable pharmacologic activity; so, appropriate chemical modification strategies can be selected in accordance with the distinct structural properties of polysaccharides to aid in improving and encouraging the presentation of their biological activities. Hence, there has been a growing interest in the chemical alteration of polysaccharides due to their various properties such as antioxidant, anticoagulant, antiviral, anticancer, biomedical, antibacterial, and immunomodulatory effects. This paper offers a comprehensive examination of recent scientific advancements produced over the past four years in the realm of unique chemical and functional modifications in curdlan and pullulan structures. This review aims to provide readers with an overview of the structural activity correlations observed in the backbone structures of curdlan and pullulan, as well as the diverse chemical modification processes employed for these polysaccharides. Additionally, the review aims to examine the effects of combining various bioactive molecules with chemically modified curdlan and pullulan and explore their potential applications in various important fields.

Zein-Induced Polyelectrolyte Complexes for Encapsulating Triterpenoid Phytochemicals

The hydrophobicity and aggregation of zein, a biopolymer, limit its application as an effective drug delivery carrier. Here, we developed a zein-induced polyelectrolyte (ZiP) complex and investigated its efficiency in delivering 1% hydrolyzed ginseng saponin, a compound K-rich fraction derived from the root of Panax ginseng. The ZiP complex was formulated by incorporating the self-assembled amphiphilic prolamin zein into the aqueous phase. The physical properties, encapsulation efficiency, and stability of the encapsulation system at room temperature (25 °C) and 45 °C were assessed. The effects of different ratios of zein, pullulan, and pectin on the formation of the ZiP complex, the encapsulation stability, and the cellular efficacy of ZiP complexes were also assessed. The ZiP complex was surface-modified with hydrophilic pullulan and pectin polysaccharides in a mass ratio of 1:2:0.2 through electrostatic interactions. The primary hydrophilic modification of the ZiP complex was formed by the adsorption of pullulan, which enhanced the encapsulation stability. The outermost hydrophilic layer comprised the gelling polysaccharide pectin, which further improved the stability of the macro-sized oil-encapsulated complex, reaching sizes over 50 μm. The size of the ZiP complex increased when the concentration of pectin or the total content of the ZiP complex increased to 2:4:0.2. Compound K was successfully encapsulated with a particle size of 294.8 nm and an encapsulation efficiency of 99.6%. The ZiP complex demonstrated stability at high temperatures and long-term stability of the encapsulated saponin over 24 weeks. These results revealed the potency of ZiP complexes that enhance the in vivo absorption of phytochemicals as effective drug delivery carriers that can overcome the limitations in industrial formulation development as a delivery system.

A critical review on valorization of food processing wastes and by-products for pullulan production

Pullulan is a commercially available exopolymer biosynthesized by Aureobasidium pullulans supplemented with nitrogen, carbon and other vital components through submerged and solid-state fermentation. These nutrients are very expensive and it raises the cost for the production of pullulan. Hence, the need of alternative cost-effective raw materials for its production is a prerequisite. Owing to its unique physicochemical features, pullulan has various applications in the food, pharmacological, and biomedical domains. Food industrial wastes generate a considerable number of by-products which accumulates and has a negative influence on the environment. These by-products are made up of proteins, carbohydrates, and other components, can be employed as substrates for the production of pullulan. The present review briefs on the pullulan production using food processing waste and by-products and the elements that impact it. It provides an insight into versatile applications of pullulan in food industries. Various challenges and future prospects in the field of research on pullulan production have been uncovered.

Preparation, Characterization, and Application of pH-Response Color-Changeable Films Based on Pullulan, Cooked Amaranth (Amaranthus tricolor L.) Juice, and Bergamot Essential Oil

Pullulan-based smart packaging films were prepared by mixing cooked amaranth juice and bergamot essential oil. The impact of cooked amaranth juice and bergamot essential oil on the color-changeability, structural characterization, and barrier, antioxidant, mechanical and thermal properties of pullulan-based films was determined. Results showed the cooked amaranth juice contained pH-response color-changing betacyanins. The pullulan films containing cooked amaranth juice were color-changeable in pH 9-12 buffers and in ammonia vapor. The color-changeable property of betacyanins in cooked amaranth juice was unaffected by bergamot essential oils. The inner structure of pullulan films was greatly affected by cooked amaranth juice, forming big and ordered humps in film cross-sections. The crystallinity of pullulan films was improved by the combined addition of cooked amaranth juice and bergamot essential oil. Among the films, the pullulan film containing cooked amaranth juice and 6% bergamot essential oil showed the highest UV-vis light barrier property, antioxidant activity, and tensile strength; while the pullulan film containing cooked amaranth juice and 4% bergamot essential oil showed the highest oxygen barrier property and thermal stability. Moreover, the pullulan films containing cooked amaranth juice were able to monitor the freshness of shrimp by presenting color changes from reddish purple to dark red.

Poly(vinyl alcohol)/Pullulan Composite Hydrogels as a Potential Platform for Wound Dressing Applications

Hydrogels are 3D networks with an excellent ability to retain a high amount of water or biological fluids, representing suitable candidates for wound dressing applications. They can provide a protective barrier and a moist environment, facilitating wound treatment. The present paper focuses on physical hydrogels obtained from poly(vinyl alcohol) (PVA) and pullulan (PULL) mixtures in different weight ratios by using the freezing/thawing method. Hybrid hydrogels of similar polymer compositions were prepared in the presence of 0.5% Laponite^® RD. The influence of polysaccharide and clay addition on the properties of PVA hydrogels was investigated. Scanning electron microscopy showed evidence of the inner porous structure. The viscoelastic properties were investigated in different shear conditions and revealed the influence of the hydrogel composition on the network strength. The swelling behavior was followed in physiological saline solutions at 37 °C and pH = 7.4. For all samples, a quasi-Fickian diffusion mechanism was found. The delivery of neomycin sulfate was studied in similar conditions as for the swelling tests (0.15 M NaCl solutions; 37 °C; pH = 7.4) and different kinetic models were used to determine the release mechanism. The Peppas-Sahlin approach described very well the in vitro drug release mechanism from the polymeric hydrogels in the absence of clay. However, the hybrid polymer/clay hydrogels showed the best fit with the Korsmeyer-Peppas model. According to the present study, the porous membranes containing 40-60% PULL (in absence of clay) are suitable for the release of therapeutic agents at wound sites in physiological conditions.

A Blend Consisting of Agaran from Seaweed Gracilaria birdiae and Chromium Picolinate Is a Better Antioxidant Agent than These Two Compounds Alone

A blend refers to the combination of two or more components to achieve properties that are superior to those found in the individual products used for their production. Gracilaria birdiae agaran (SPGb) and chromium picolinate (ChrPic) are both antioxidant agents. However, there is no documentation of blends that incorporate agarans and ChrPic. Hence, the objective of this study was to generate blends containing SPGb and ChrPic that exhibit enhanced antioxidant activity compared to SPGb or ChrPic alone. ChrPic was commercially acquired, while SPGb was extracted from the seaweed. Five blends (B1; B2; B3; B4; B5) were produced, and tests indicated B5 as the best antioxidant blend. B5 was not cytotoxic or genotoxic. H₂O₂ (0.6 mM) induced toxicity in fibroblasts (3T3), and this effect was abolished by B5 (0.05 mg·mL^-1); neither ChrPic nor SPGb showed this effect. The cells also showed no signs of toxicity when exposed to H₂O₂ after being incubated with B5 and ChrPic for 24 h. In another experiment, cells were incubated with H₂O₂ and later exposed to SPGb, ChrPic, or B5. Again, SPGb was not effective, while cells exposed to ChrPic and B5 reduced MTT by 100%. The data demonstrated that B5 has activity superior to SPGb and ChrPic and points to B5 as a product to be used in future in vivo tests to confirm its antioxidant action. It may also be indicated as a possible nutraceutical agent.

Pullulan-Based Hydrogels in Wound Healing and Skin Tissue Engineering Applications: A Review

Wound healing is a complex process of overlapping phases with the primary aim of the creation of new tissues and restoring their anatomical functions. Wound dressings are fabricated to protect the wound and accelerate the healing process. Biomaterials used to design dressing of wounds could be natural or synthetic as well as the combination of both materials. Polysaccharide polymers have been used to fabricate wound dressings. The applications of biopolymers, such as chitin, gelatin, pullulan, and chitosan, have greatly expanded in the biomedical field due to their non-toxic, antibacterial, biocompatible, hemostatic, and nonimmunogenic properties. Most of these polymers have been used in the form of foams, films, sponges, and fibers in drug carrier devices, skin tissue scaffolds, and wound dressings. Currently, special focus has been directed towards the fabrication of wound dressings based on synthesized hydrogels using natural polymers. The high-water retention capacity of hydrogels makes them potent candidates for wound dressings as they provide a moist environment in the wound and remove excess wound fluid, thereby accelerating wound healing. The incorporation of pullulan with different, naturally occurring polymers, such as chitosan, in wound dressings is currently attracting much attention due to the antimicrobial, antioxidant and nonimmunogenic properties. Despite the valuable properties of pullulan, it also has some limitations, such as poor mechanical properties and high cost. However, these properties are improved by blending it with different polymers. Additionally, more investigations are required to obtain pullulan derivatives with suitable properties in high quality wound dressings and tissue engineering applications. This review summarizes the properties and wound dressing applications of naturally occurring pullulan, then examines it in combination with other biocompatible polymers, such chitosan and gelatin, and discusses the facile approaches for oxidative modification of pullulan.

Evaluation of the Antibacterial Properties of Polyvinyl Alcohol-Pullulan Scaffolds Loaded with Nepeta racemosa Lam. Essential Oil and Perspectives for Possible Applications

Essential oil of Nepeta racemosa Lam. was extracted and characterized to determine its antimicrobial activity and potential use in applications. The essential oil was loaded on polyvinyl alcohol-pullulan films and gels and characterized by optical microscopy, scanning electron microscopy, and UV-Vis spectroscopy before having its antimicrobial capacities assessed. The essential oil extracted from Nepeta racemosa Lam. was characterized using gas chromatography coupled with mass spectroscopy, which indicated that the most abundant component was nepetalic acid (55.5%), followed by eucalyptol (10.7%) and other compounds with concentrations of about 5% or less. The essential oil, as well as the loaded films and gels, exhibited good antibacterial activity on both gram-positive and gram-negative strains, with growth inhibition zones larger in some cases than for gentamicin, indicating excellent premises for using these essential-oil-loaded materials for applications in the food industry or biomedicine.

New Materials Based on Molecular Interaction between Hyaluronic Acid and Bovine Albumin

In this work, the interactions between hyaluronic acid and bovine serum albumin were investigated. The film-forming properties of the mixture were proven, and the mechanical and surface properties of the films were measured. The results showed the interactions between hyaluronic acid and albumin, mainly by hydrogen bonds. Molecular docking was used for the visualization of the interactions. The films obtained from the mixture of hyaluronic acid possessed different properties to films obtained from the single component. The addition of bovine serum albumin to hyaluronic acid led to a decrease in the mechanical properties, and to an increase in the surface roughness of the film. The new materials that have been obtained by blending can form a new group of materials for biomedicine and cosmetology.

Fabrication and characterization of pullulan-based composite films incorporated with bacterial cellulose and ferulic acid

Pullulan-based composite films incorporated with bacterial cellulose (BC) and ferulic acid (FA) were prepared by solution casting method. The rheological, morphological, barrier, optical, anti-fogging, and antioxidant properties of pullulan-based composite films doped with BC and FA were investigated. The rheological results showed that all film-forming solution was pseudoplastic fluid and its viscosity increased with the increase of BC content. An appropriate BC (2 %) and FA were uniformly dispersed in pullulan to form uniform and dense composite films. With the increase of BC content, the roughness and opacity of composite films increased while their UV-vis barrier performance was improved by incorporating BC and FA. Fourier transform infrared spectrometer analysis demonstrated that hydrogen bond interactions among pullulan, BC, and FA were found, and incorporating BC could increase the crystallinity of the composite films, thus enhancing their mechanical, barrier, hydrophobic, and thermal stability properties. Pullulan-based composite films incorporated with 2 % BC and FA (P-BC2-FA) showed better mechanical properties, water, oxygen, and carbon dioxide barrier performances, and its water contact angle value also increased compared with control, respectively. P-BC2-FA film showed superior anti-fogging and antioxidant activities. These results indicate that the P-BC2-FA film are expected to be a potential target of bioactive packaging.

Bioinspired Hydrogels as Platforms for Life-Science Applications: Challenges and Opportunities

Hydrogels, as interconnected networks (polymer mesh; physically, chemically, or dynamic crosslinked networks) incorporating a high amount of water, present structural characteristics similar to soft natural tissue. They enable the diffusion of different molecules (ions, drugs, and grow factors) and have the ability to take over the action of external factors. Their nature provides a wide variety of raw materials and inspiration for functional soft matter obtained by complex mechanisms and hierarchical self-assembly. Over the last decade, many studies focused on developing innovative and high-performance materials, with new or improved functions, by mimicking biological structures at different length scales. Hydrogels with natural or synthetic origin can be engineered as bulk materials, micro- or nanoparticles, patches, membranes, supramolecular pathways, bio-inks, etc. The specific features of hydrogels make them suitable for a wide variety of applications, including tissue engineering scaffolds (repair/regeneration), wound healing, drug delivery carriers, bio-inks, soft robotics, sensors, actuators, catalysis, food safety, and hygiene products. This review is focused on recent advances in the field of bioinspired hydrogels that can serve as platforms for life-science applications. A brief outlook on the actual trends and future directions is also presented.

Preparation and characterization of Pullulan-based nanocomposite scaffold incorporating Ag-Silica Janus particles for bone tissue engineering

A nanocomposite bone scaffold was fabricated from pullulan, a natural extracellular polysaccharide. Pullulan (PULL) was blended with polyvinylpyrrolidone (PVP), and a nano-platform with ball-stick morphology, Ag-Silica Janus particles (Ag-Silica JPs), which were utilized to fabricate nanocomposite scaffold with enhanced mechanical and biological properties. The Ag-Silica JPs were synthesized via a one-step sol-gel method and used to obtain synergistic properties of silver and silica's antibacterial and bioactive effects, respectively. The synthesized Ag-Silica JPs were characterized by means of FE-SEM, DLS, and EDS. The PULL/PVP scaffolds containing Ag-Silica JPs, fabricated by the freeze-drying method, were evaluated by SEM, EDS, FTIR, XRD, ICP and biological analysis, including antibacterial activity, bioactivity, cell viability and cell culture tests. It was noted that increasing Ag-Silica JPs amounts to an optimum level (1% w/w) led to an improvement in compressive modulus and strength of nanocomposite scaffold, reaching 1.03 ± 0.48 MPa and 3.27 ± 0.18, respectively. Scaffolds incorporating Ag-Silica JPs also showed favorable antibacterial activity. The investigations through apatite forming ability of scaffolds in SBF indicated spherical apatite precipitates. Furthermore, the cell viability test proved the outstanding biocompatibility of nanocomposite scaffolds (more than 90%) confirmed by cell culture tests showing that increment of Ag-Silica JPs amounts led to better adhesion, proliferation, ALP activity and mineralization of MG-63 cells.

Chitosan/Silk Fibroin Materials for Biomedical Applications-A Review

This review provides a report on recent advances in the field of chitosan (CTS) and silk fibroin (SF) biopolymer blends as new biomaterials. Chitosan and silk fibroin are widely used to obtain biomaterials. However, the materials based on the blends of these two biopolymers have not been summarized in a review paper yet. As these materials can attract both academic and industrial attention, we propose this review paper to showcase the latest achievements in this area. In this review, the latest literature regarding the preparation and properties of chitosan and silk fibroin and their blends has been reviewed.

Addressing the Needs of the Rapidly Aging Society through the Development of Multifunctional Bioactive Coatings for Orthopedic Applications

The unprecedented aging of the world's population will boost the need for orthopedic implants and expose their current limitations to a greater extent due to the medical complexity of elderly patients and longer indwelling times of the implanted materials. Biocompatible metals with multifunctional bioactive coatings promise to provide the means for the controlled and tailorable release of different medications for patient-specific treatment while prolonging the material's lifespan and thus improving the surgical outcome. The objective of this work is to provide a review of several groups of biocompatible materials that might be utilized as constituents for the development of multifunctional bioactive coatings on metal materials with a focus on antimicrobial, pain-relieving, and anticoagulant properties. Moreover, the review presents a summary of medications used in clinical settings, the disadvantages of the commercially available products, and insight into the latest development strategies. For a more successful translation of such research into clinical practice, extensive knowledge of the chemical interactions between the components and a detailed understanding of the properties and mechanisms of biological matter are required. Moreover, the cost-efficiency of the surface treatment should be considered in the development process.

Effects of gallic acid combined with epsilon-polylysine hydrochloride incorporated in a pullulan-CMC edible coating on the storage quality of sea bass

The effects of edbile coatings, based on pullulan and sodium carboxymethylcellulose (PUL–CMC) with gallic acid (GA) and/or ε-polylysine hydrochloride (PL), on the quality of sea bass (Lateolabrax maculatus) fillets during storage at 4 °C for 20 days were assessed in this study. Total viable counts (TVC), thiobarbituric acid (TBA), pH value, total volatile basic nitrogen (TVB-N), water holding capacity (WHC), water migration, texture profiles, and electronic nose results were measured at five day intervals. The results showed that treatments with PUL–CMC–GA, PUL–CMC–PL, and PUL–CMC–GA–PL coatings retarded the increase of the TVC, TBA, pH, and TVB-N value when compared with the results of the control group. These coatings significantly maintained the content of immobile water, WHC, texture and flavor properties of the fish. In addition, use of PUL–CMC–GA–PL was more effective than use of PUL–CMC–GA and PUL–CMC–PL. The TVC, TVB-N, and pH in the PUL–CMC–GA–PL group were all lower than those in the other groups during the whole storage time. The TBA value in the PUL–CMC–GA–PL group remained below 0.7 mg malonaldehyde (MDA) per kg at 20 d, which was extended by 10 d when compared with the values for the other groups. The WHC in PUL–CMC–GA–PL only decreased by 6.53% during 20 d of storage. The results indicated that GA combined with PL had a synergistic effect on improving the preservation properties of PUL–CMC, which could inhibit lipid oxidation, protein degradation and microbial growth, and maintain better texture characteristics during the storage of sea bass fillets.

This study investigated the effects of pullulan and sodium carboxymethylcellulose composite coatings with gallic acid and/or ε-polylysine hydrochloride on the quality of sea bass fillets during 4 °C storage.

Photopolymerizable pullulan: Synthesis, self-assembly and inkjet printing

HYPOTHESIS

Pullulan, an exopolysaccharide consisting of maltotriose repeating units, has recently found many applications in different fields, such as food, packaging, cosmetics and pharmaceuticals. The introduction of photo-crosslinkable methacrylic units potentially allows to use pullulan derivative in inkjet 3D printing.

EXPERIMENTS

Pullulan was functionalized with methacrylic groups and the derivative was characterized by NMR, FT-IR and Raman spectroscopy. Water dispersions were thoroughly investigated by optical microscopy, SAXS and rheology to evaluate the self-assembly properties and they were used as photo-crosslinkable inks in a 3D printer, also in comparison with pristine pullulan. The structural and mechanical properties of the obtained films were studied by Atomic Force Microscopy and tensile strength tests.

FINDINGS

The introduction of methacrylic groups moderately affects the self-assembly of the polymer in water, resulting in a slight increase of the gyration radius of the polymer coils and in a small decrease of the viscosity, retaining the typical shear-thinning behavior of concentrated polysaccharides in water. The structural and mechanical properties of the 3D printed films are much more affected, showing the presence of sub-micrometric phase segregated domains which are further separated by the cross-linking. As a result, the deformability of the materials is improved, with a lower tensile strength.

Recent advances in the production of biomedical systems based on polyhydroxyalkanoates and exopolysaccharides

In recent years, growing attention has been devoted to naturally occurring biological macromolecules and their ensuing application in agriculture, cosmetics, food and pharmaceutical industries. They inherently have antigenicity, low immunogenicity, excellent biocompatibility and cytocompatibility, which are ideal properties for the design of biomedical devices, especially for the controlled delivery of active ingredients in the most diverse contexts. Furthermore, these properties can be modulated by chemical modification via the incorporation of other (macro)molecules in a random or controlled way, aiming at improving their functionality for each specific application. Among the wide variety of natural polymers, microbial polyhydroxyalkanoates (PHAs) and exopolysaccharides (EPS) are often considered for the development of original biomaterials due to their unique physicochemical and biological features. Here, we aim to fullfil a gap on the present associated literature, bringing an up-to-date overview of ongoing research strategies that make use of PHAs (poly (3-hydroxybutyrate), poly (3-hydroxybutyrate-co-3-hydroxyvalerate), poly (3-hydroxyoctanoate), poly(3-hydroxypropionate), poly (3-hydroxyhexanoate-co-3-hydroxyoctanoate), and poly (3-hydroxybutyrate-co-3-hydroxyhexanoate)) and EPS (bacterial cellulose, alginates, curdlan, pullulan, xanthan gum, dextran, hyaluronan, and schizophyllan) as sources of interesting and versatile biomaterials. For the first time, a monograph addressing the properties, pros and cons, status, challenges, and recent progresses regarding the application of these two important classes of biopolymers in biomedicine is presented.

Chemical and physical Chitosan modification for designing enzymatic industrial biocatalysts: How to choose the best strategy?

Chitosan is one of the most abundant natural polymer worldwide, and due to its inherent characteristics, its use in industrial processes has been extensively explored. Because it is biodegradable, biocompatible, non-toxic, hydrophilic, cheap, and has good physical-chemical stability, it is seen as an excellent alternative for the replacement of synthetic materials in the search for more sustainable production methodologies. Thus being, a possible biotechnological application of Chitosan is as a direct support for enzyme immobilization. However, its applicability is quite specific, and to overcome this issue, alternative pretreatments are required, such as chemical and physical modifications to its structure, enabling its use in a wider array of applications. This review aims to present the topic in detail, by exploring and discussing methods of employment of Chitosan in enzymatic immobilization processes with various enzymes, presenting its advantages and disadvantages, as well as listing possible chemical modifications and combinations with other compounds for formulating an ideal support for this purpose. First, we will present Chitosan emphasizing its characteristics that allow its use as enzyme support. Furthermore, we will discuss possible physicochemical modifications that can be made to Chitosan, mentioning the improvements obtained in each process. These discussions will enable a comprehensive comparison between, and an informed choice of, the best technologies concerning enzyme immobilization and the application conditions of the biocatalyst.

Multilayer fibroin/chitosan oligosaccharide lactate and pullulan immunomodulatory patch for treatment of hernia and prevention of intraperitoneal adhesion

This study aims to develop a novel intraperitoneal two- or three-layered patch with immunomodulatory property for treatment of hernia, regeneration of abdominal wall and prevention of intraperitoneal adhesions. Polypropylene (PP) mesh, middle layer, was intended to provide mechanical support whereas pullulan (PUL) hydrogel coating layer was designed to prevent intraperitoneal adhesions. Fibroin/chitosan oligosaccharide lactate (F/COS) layer electrospun on one side of pullulan was chosen for immunomodulation and abdominal wall regeneration. Physical and mechanical properties and regenerative capacity of intraperitoneal patches were determined. Immunomodulatory property of electrospun layer and whole patch was studied by determining nitric oxide amount produced by RAW 264.7 macrophages. 25 % (w/v) PUL hydrogel and F/COS with 90:10 (w/w) ratio yielded optimal results. Here, we report that fabricated intraperitoneal patches successfully prevented cell adhesion on one side and increased cell viability and proliferation on other side, along with immunomodulation, in vitro.

Pressure-assisted microsyringe 3D printing of oral films based on pullulan and hydroxypropyl methylcellulose

Oral films (OFs) continue to attract attention as drug delivery systems, particularly for pedatric and geriatric needs. However, immiscibility between different polymers limits the full potential of OFs from being explored. One example is pullulan (PUL), a novel biopolymer which often has to be blended with other polymers to reduce cost and alter its mechanical properties. In this study, the state-of-the-art in fabrication techniques, three-dimensional (3D) printing was used to produce hybrid film structures of PUL and hydroxypropyl methylcellulose (HPMC), which were loaded with caffeine as a model drug. 3D printing was used to control the spatial deposition of films. HPMC was found to increase the mean mechanical properties of PUL films, where the tensile strength, elastic modulus and elongation break increased from 8.9 to 14.5 MPa, 1.17 to 1.56 GPa and from 1.48% to 1.77%, respectively. In addition, the spatial orientation of the hybrid films was also explored to determine which orientation could maximize the mechanical properties of the hybrid films. The results revealed that 3D printing could modify the mechanical properties of PUL whilst circumventing the issues associated with immiscibility.

Application of composite degradable modified starch-based flocculant on dewatering and recycling properties

Sludge dewatering is an important step for wastewater treatment. Composite degradable flocculant (CDF) was prepared by cationic polyacrylamide (PAM) grafting onto modified starch with a novel initiator, and characterized by Fourier transform infrared spectroscopy. The microstructure of flocculated sludge was characterized by scanning electron microscopy. The study investigated the properties of CDF compared to PAM, which showed that the prepared CDF exhibited a highly effective flocculation on sludge dewatering, a higher transmittance and chemical oxygen demand removal rate, and a lower value of effluent ammonia nitrogen and total phosphorus. The fermentation process was also analyzed by testing the performance of dewatered sludge (temperature, pH, ammonia nitrogen, E4/E6 (humic acid absorbance at 465 nm (E4) and 665 nm (E6))). The dehydrated sludge with CDF could be easily compressed into cakes by belt-filter for easy transportation and storage. With the continuous addition of CDF and PAM, the corresponding index of capillary suction time (CST) increased. Moreover, the total value of CST with CDF was low, showing a good dewaterability. In addition, the sludge index of pumping time and moisture content with CDF were low in contrast with PAM. Fermentation experiments demonstrated that sludge with CDF had a comparatively high temperature and low value of E4/E6. Such novel CDF shows enormous potential in wastewater treatment and sludge fermentation.

Chemical Modification of Pullulan Exopolysaccharide by Grafting Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBHV) via Click Chemistry

Biodegradable and biocompatible copolymers have been often studied for the development of biomaterials for drug delivery systems. In this context, this work reports the synthesis and characterization of a novel pullulan-g-poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (Pull-g-PHBHV) graft copolymer using click chemistry. Well-defined and functional pullulan backbones containing azide groups (PullN₃) previously prepared by our group were successfully used for this purpose and propargyl-terminated poly(3-hydroxybutyrate-co-3-hydroxyvalerate) was prepared via transesterification using propargyl alcohol as a chain transfer agent. By an alkyne-azide cycloaddition reaction catalyzed by copper (Cu (I)) (CuAAC), the graft copolymer Pull-g-PHBHV was obtained. The chemical structures of the polymers were accessed by ¹H NMR and ¹³C NMR FTIR. Disappearance of the bands referring to the main bonds evidenced success in the grafting reaction. Besides that, DRX, DSC and TGA were used in order to access the changes in crystallinity and thermal behavior of the material. The remaining crystallinity of the Pull-g-PHBHV structure evidences the presence of PHBHV. Pull-g-PHBHV presented lower degradation maximum temperature values than the starting materials, indicating its minor thermal stability. Finally, the synthesized material is an innovative biopolymer, which has never been reported in the previous literature. It is a bio-derived and biodegradable polymer, chemically modified, resulting in interesting properties which can be useful for their further applications as biomedical systems for controlled delivery, for example.

Injectable Thermosensitive Chitosan/Pullulan-Based Hydrogels with Improved Mechanical Properties and Swelling Capacity

Thermosensitive chitosan/β-glycerophosphate (CS/BGP) systems have been developed as injectable hydrogels. However, the hydrogels exhibited poor mechanical properties due to their physically crosslinked networks. In this work, CS/BGP hydrogels were reinforced by covalent crosslinking using genipin (GE) and concomitantly semi-interpenetrating networks using pullulan (PL). Based on response surface methodology, the optimized formulation was composed of CS (1.05%, w/v), PL (1%, w/v), BGP (6%, w/v), and GE (70.79 mcg/mL). The optimized hydrogels exhibited Young's modulus of 92.65 ± 4.13 kPa and a percentage of equilibrium swelling ratio of 3259.09% ± 58.90%. Scanning electron micrographs revealed a highly porous structure with nanofibrous networks in the CS/PL/BGP/GE hydrogels. The chemical interactions between the compositions were investigated by Fourier-transform infrared spectroscopy. Rheological measurements illustrated that the optimized hydrogels displayed sol-gel transition within one minute at 37 °C, a lower critical solution temperature of about 31 °C, and viscoelastic behavior with high storage modulus. Furthermore, the optimized hydrogels demonstrated higher resistance to in vitro enzymatic degradation, compared to the hydrogels without GE. Our findings could suggest that the thermosensitive CS/PL/BGP/GE hydrogels with enhanced mechanical properties and swelling capacity demonstrate the potential for use as scaffolds and carriers for cartilage tissue engineering and drug delivery applications.

Pullulan Films Containing Rockrose Essential Oil for Potential Food Packaging Applications

Active packaging is designed to control the development of decay- and disease-causing microorganisms and is emerging as a promising technology for extending shelf-life, maintaining food safety, reducing waste, and minimizing the risks for foodborne diseases. The goal of this work was to develop and characterize bioactive pullulan-based films, containing rockrose (Cistus ladanifer) essential oil. Among other abundant compounds (camphene, bornyl acetate and trans-pinocarveol), α-pinene was identified as the major compound of rockrose essential oil (39.25%). The essential oil presented stronger antibacterial activity against Gram-positive than against Gram-negative bacteria. The antioxidant results indicate the potential of the developed films to be used to package foods susceptible to oxidation and rancification, thus improving their shelf-life. Also, this study reflects the potential of rockrose essential oil, free or incorporated in pullulan, as a promising quorum sensing inhibitor, since it was able to interrupt intercellular communication, inhibiting violacein production. Electronic microscopy images showed the antibiofilm activity of the films with rockrose essential oil that were able to influence bacterial adhesion, which may be explained by the differences in the surface free energy of the films, as also determined.

Preparation and evaluation of curcumin grafted hyaluronic acid modified pullulan polymers as a functional wound dressing material

Curcumin grafted hyaluronic acid modified pullulan polymers (Cur-HA-SPu) by chemical conjugation was designed and prepared, and its film may be used to accelerate wound healing and help to fight infection. The synthesis of Cur-HA-SPu polymer was characterized by FT-IR, ¹H NMR and DSC. Cur-HA-SPu film has a higher swelling ratio than that of HA-SPu film. Moreover, the good biocompatibility of Cur-HA-SPu polymer was confirmed by skin irritation, cytotoxicity and hemolysis tests. Compared to Cur, the MTT and proliferation test carried out in L929 cells revealed that Cur-HA-SPu polymer showed no cytotoxicity and enhanced cell proliferation. Cur-HA-SPu polymer exhibited a certain bactericidal activity against E. coli and S. aureus. Furthermore, the materials showed antioxidant activity when DPPH method determined. Wound healing study using wistar rat model demonstrated that Cur-HA-SPu film obtained better wound healing result than that of HA-SPu film or natural healing. The above results suggest that Cur-HA-SPu film is a promising and safety formulation for accelerating skin wound healing.

Pullulan for Advanced Sustainable Body- and Skin-Contact Applications

The present review had the aim of describing the methodologies of synthesis and properties of biobased pullulan, a microbial polysaccharide investigated in the last decade because of its interesting potentialities in several applications. After describing the implications of pullulan in nano-technology, biodegradation, compatibility with body and skin, and sustainability, the current applications of pullulan are described, with the aim of assessing the potentialities of this biopolymer in the biomedical, personal care, and cosmetic sector, especially in applications in contact with skin.

Single-step, acid-based fabrication of homogeneous gelatin-polycaprolactone fibrillar scaffolds intended for skin tissue engineering

Blends of natural and synthetic polymers have recently attracted great attention as scaffolds for tissue engineering applications due to their favorable biological and mechanical properties. Nevertheless, phase-separation of blend components is an important challenge facing the development of electrospun homogeneous fibrillar natural-synthetic polymers scaffolds; phase-separation can produce significant detrimental effects for scaffolds fabricated by electrospinning. In the present study, blends of gelatin (Gel; natural polymer) and polycaprolactone (PCL; synthetic polymer), containing 30 and 45 wt% Gel, were prepared using acetic acid as a 'green' sole solvent to straightforwardly produce appropriate single-step Gel-PCL solutions for electrospinning. Miscibility of Gel and PCL in the scaffolds was assessed and the morphology, chemical composition and structural and solid-state properties of the scaffolds were thoroughly investigated. Results showed that the two polymers proved miscible under the single-step solution process used and that the electrospun scaffolds presented suitable properties for potential skin tissue engineering applications. Viability, metabolic activity and protein expression of human fibroblasts cultured on the Gel-PCL scaffolds were evaluated using LIVE/DEAD (calcein/ethidium homodimer), MTT-Formazan and immunocytochemistry assays, respectively. In vitro results showed that the electrospun Gel-PCL scaffolds enhanced cell viability and proliferation in comparison to PCL scaffolds. Furthermore, scaffolds allowed fibroblasts expression of extracellular matrix proteins, tropoelastin and collagen Type I, in a similar way to positive controls. Results indicated the feasibility of the single-step solution process used herein to obtain homogeneous electrospun Gel-PCL scaffolds with Gel content ≥30 wt% and potential properties to be used as scaffolds for skin tissue engineering applications for wound healing.

Fabrication and characterization of a novel polysaccharide based composite nanofiber films with tunable physical properties

In this study, the pullulan/ethyl cellulose composite nanofiber films with tunable physical properties were fabricated by blend electrospinning process. The solution properties of polysaccharide polymers were investigated and related with the morphology of the nanofiber films, and the results showed that the addition of ethyl cellulose caused decreasing viscosity and conductivity of solutions, which gave rise to the smaller fiber diameter. The Fourier transform infrared spectroscopy indicated that pullulan and ethyl cellulose chains interacted with each other through hydrogen bonding. X-ray diffraction analysis showed that electrospinning process retarded the crystallization of polysaccharide molecules. Thermal analysis showed that the composite nanofiber films possessed higher melting temperature and degradation temperature than the pure pullulan nanofiber film. Water contact angle and water stability test proved that the composite nanofiber films possessed tunable surface wettability (94.6°-120.1°) and improved water stability. The mechanical test showed that the composite nanofiber films had enhanced mechanical strength.

Topical administration of pullulan gel accelerates skin tissue regeneration by enhancing collagen synthesis and wound contraction in rats

Here, we have studied the efficacy of pullulan gel on wound healing by performing biochemical, biophysical and histological investigations. A 2 cm² open excision wound was made on the dorsum of the rats and topically treated with 500 μL of pullulan gel. The control group was left untreated. The povidone-iodine (PI) ointment treated animals were considered as positive control. The granulation tissues formed were collected at different time point intervals and used for various biochemical, biophysical and histological analyses. Biochemical analyses revealed that pullulan gel significantly (p < 0.001) improved the collagen, hexosamine, protein and DNA content. Biophysical analyses resulted in an increased rate of wound contraction (p < 0.001). The period of epithelialization was shorter (p < 0.001) in pullulan gel treated group (11 days) than control (22 days) and PI group (17 days). Histological evaluation on days 4, 8 and 11 substantiated that pullulan gel treatment improved the wound re-epithelialization, dermal regeneration, blood vessels formation and collagen synthesis than in control and PI groups. Interrupted SDS-PAGE of collagen showed an increase in Type III collagen band evident for the healing potential of pullulan gel. Thus, our results strongly prove that pullulan gel could be a potential wound healing agent.